NorthStar II User Manual

NorthStar II

User Manual

This manual describes the operating functions and features of the NorthStar II software version 3.6 for your LED display. The version of software installed can be found in the About menu item located under the Help menu.

©EBSCO Sign Group

Document revision 11/16/2015

Page 1

NorthStar II User Manual

Copyright Notice, Terms and Conditions

This software is subject to the following license terms and conditions. Please read this license before installing the software on your PC. If you do not agree to the terms and conditions of this license you may return the software for a full refund.

BY CLICKING ON THE "ACCEPT" BUTTON, OPENING THE PACKAGE, DOWNLOADING THE PRODUCT OR USING THE EQUIPMENT

THAT CONTAINS THIS PRODUCT, YOU ARE CONSENTING TO BE BOUND BY THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF

THE TERMS OF THIS AGREEMENT, CLICK THE "DO NOT ACCEPT" BUTTON AND THE INSTALLATION PROCESS WILL NOT

CONTINUE, RETURN THE PRODUCT TO THE PLACE OF PURCHASE FOR A FULL REFUND, OR DO NOT DOWNLOAD THE PRODUCT.

SINGLE COPY SOFTWARE LICENSE

THIS IS A SINGLE COPY SOFTWARE LICENSE granted by the software developer. The software in this package is licensed to you as the end user. It is not for resale.

1.0 License

1.1 The software enclosed in this package is copyrighted material. Once you have paid the required single copy license fee, you may use the software for as long as you like provided you do not violate the copyright and if you follow these simple rules.

1.1.1 You may use the software on multiple computers for which it is designed.

1.1.2 You may not make any changes or modifications to the licensed software, and you may not decompile, disassemble, or otherwise reverse engineer the software.

1.1.3 You may not rent it or lease it to others.

2.0 Limited Warranty

2.1 The software developer warrants that the media which the software is recorded on and the documentation provided with it are free from defects in materials and workmanship under normal use.

2.2 The software developer warrants that the software itself will perform substantially in accordance with the specifications set forth in the documentation provided with it.

2.3 The above express warranties are made for a period of ninety (90) days from the date the software is delivered to you as the first user.

2.4 Obligations of the software developer during the warranty period:

2.4.1 The software developer will replace the CD or USB drive which proves defective in materials or workmanship, without additional charge, on an exchange basis. In the case of an error in the documentation, the software developer will correct errors in the documentation without charge by providing addenda or substitute pages.

2.4.2 The software developer will either replace or repair without additional charge any software that does not perform in substantial accordance with the specifications of the documentation. This will be done by delivering to you a corrected copy of the software or corrective code, on an exchange basis.

2.4.3 If the software developer is unable to replace defective documentation or defective media or if the software developer is unable to provide a corrected copy of the software or corrected documentation within a reasonable period of time, the software developer will either replace the software with a functionally similar program or refund the license fees paid for use of the software.

2.5 Exclusion of other Warranties

2.5.1 The software developer does not warrant that the functions contained in the software will meet your requirements or that the operation of the software will be uninterrupted or error free.

2.5.2 The warranty does not cover any media or documentation which has been subjected to damage or abuse by you.

2.5.3 The software warranty does not cover any copy of the software which has been altered or changed in any way by you or others.

2.5.4 The software developer is not responsible for problems caused by changes in the operating characteristics of the computer hardware or operating system which are made after the delivery of the software.

©EBSCO Sign Group

Document revision 11/16/2015

Page 2

NorthStar II User Manual

2.6 Any implied warranties including any warranties of merchantability or fitness for a particular purpose are limited to the term of the express warranties.

2.6.1 Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

2.7 The software developer shall not in any case be liable for special, incidental, consequential, indirect or other similar damages arising from any breach of these warranties even if the software developer or its agent has

been advised of the possibility of such damages.

2.7.1 Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

DISCLAIMER: EXCEPT AS SPECIFIED IN THIS WARRANTY, ALL EXPRESS OR IMPLIED CONDITIONS,

REPRESENTATIONS, AND WARRANTIES INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT OR ARISING FROM A COURSE OF

DEALING, USAGE, OR TRADE PRACTICE, ARE HEREBY EXCLUDED TO THE EXTENT ALLOWED BY APPLICABLE LAW.

IN NO EVENT WILL THE SOFTWARE DEVELOPER OR ITS SUBSIDIARIES, DIVISIONS OR SUPPLIERS BE LIABLE FOR

ANY LOST REVENUE, PROFIT, OR DATA, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR PUNITIVE

DAMAGES HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE EVEN IF THE SOFTWARE DEVELOPER OR ITS SUPPLIERS HAVE BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall the software developer or its suppliers’ liability to

Customer, whether in contract, tort (including negligence), or otherwise, exceed the price paid by Customer. The foregoing limitations shall apply even if the above-stated warranty fails of its essential purpose.

2.8 Your Obligations Under The Warranty:

2.8.1 You must call the customer service department for authorization to return any defective item, during the warranty period.

2.8.2 If the customer service representative is unable to correct your problem by telephone, you will be provided with a return authorization number and an address for returning the defective item for warranty service or replacement.

2.8.3 You must insure any defective item being returned because we do not assume the risk of loss or damage while in transit.

2.9 Other Conditions:

2.9.1 The warranties set forth above are in lieu of all other express and implied warranties, whether oral, written or implied, and the remedies set forth above are your sole and exclusive remedies.

2.9.2 Only an authorized officer of the software developer may make modifications to this warranty, or additional warranties binding on the software developer.

2.9.3 Accordingly, additional statements such as advertising or presentations whether written, oral or implied do not constitute warranties by the software developer and should not be relied upon as such.

3.0 Limitation Of Liability

3.1 In no case shall the software developer’s liability exceed the license fees paid for the right to use the Licensed

Software or One Hundred Dollars ($100.00), whichever is greater.

4.0 Integration

4.1

2.9.4 This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.

This License shall be governed by and construed in accordance with the laws of the State of Florida, United

States of America, as if performed wholly within the state and without giving effect to the principles of conflict of law. If any portion hereof is found to be void or unenforceable, the remaining provisions of this

License shall remain in full force and effect. This license constitutes the entire agreement and understanding between the parties and supersedes any prior agreement or understanding whether written, oral or implied, relating to the subject of this license.

4.2 This agreement may only be modified by a written agreement signed by the software developer.

©EBSCO Sign Group

Document revision 11/16/2015

Page 3

NorthStar II User Manual

Table of Contents

What is NorthStar II? .......................................................................................................................... 5

Terminology ....................................................................................................................................... 5

System Requirements ........................................................................................................................ 5

Software Installation ......................................................................................................................... 6

Display Setup ..................................................................................................................................... 7

Creating a New Playlist ..................................................................................................................... 8

Opening an Existing Playlist .............................................................................................................. 8

Screen Overview ............................................................................................................................... 9

Working with Frames ........................................................................................................................ 10

Adding Text to a Frame ..................................................................................................................... 12

Adding Images to a Frame ................................................................................................................ 15

Adding Video Clips to a Frame .......................................................................................................... 16

Adding Date, Time and Temperature to a Frame .............................................................................. 18

Adding a Border and Background Color to a Frame ......................................................................... 19

Adding an Outline to Text ................................................................................................................. 20

Setting the Frame Duration ............................................................................................................... 21

Using Transition Effects ..................................................................................................................... 21

Scheduling a Frame ........................................................................................................................... 22

Previewing, Saving and Transmitting Your Playlist ........................................................................... 23

Advanced Functionality

Managing and Sharing Playlists ............................................................................................ 24

Changing Playlist Properties and Locations ......................................................................... 25

Adjusting Brightness and Power Settings ............................................................................ 26

Working with Multiple Displays ............................................................................................ 26

Working with Frame Groups ................................................................................................. 27

Viewing Display Information ................................................................................................ 28

Remote Viewing of Display Content .................................................................................... 28

Updating the Display’s Firmware ......................................................................................... 28

Changing the Display’s Name Settings ................................................................................. 29

Changing the Display’s Network Settings ............................................................................ 29

Changing the Display’s Date and Time Settings ................................................................... 30

The Information boxes located within this manual contain additional important notes.

Alert boxes contain instructions that must be followed to ensure proper performance of the software or display.

©EBSCO Sign Group

Document revision 11/16/2015

Page 4

NorthStar II User Manual

What is NorthStar II?

NorthStar II is an advanced Windows®-based software application that controls the message on your

LED display. With it, you can add text, images and video clips that can be scheduled at the time and date of your choice.

The software also offers a suite of diagnostic tools and hardware controls that allow you or a technician to fine-tune the performance of your display.

Due to the variety of matrix sizes and display colors that are compatible with this software, the examples contained in this manual may not reflect the capabilities of your display.

Terminology

The following terminology is used throughout this manual.

• Display – The portion of your outdoor sign that contains the LEDs and other electronic components. Displays come in a wide variety of sizes, and can be single or double-sided.

• Frame – A single unit of a playlist that can contain static text, scrolling text, a still image or a video clip. A frame can be scheduled to be shown on a certain date or at a certain time, and can have various incoming and outgoing transition effects.

• Playlist– A sequential list of frames that will be shown on your display. The playlist also contains information on duration, scheduling, and any transition effects selected.

• Preview– Viewing a single frame or the entire playlist within the software to see how it will look on the display.

• Transmit– Sending the playlist to the display for viewing by the public.

System Requirements

The software can be run on any modern Windows®-based computer. The following are the minimum requirements for installation:

• Windows XP Service Pack 3 and above

• Microsoft .NET 3.5

• 512 MB RAM

• True color 24-bit color video card, minimum resolution of 1024x768

• 100 MB free drive space

• Network card

• Adobe Reader or other PDF viewing software

©EBSCO Sign Group

Document revision 11/16/2015

Page 5

NorthStar II User Manual

Software Installation

If you use Windows Versions 8, 8.1 or 10, you must download and install Microsoft .NET 3.5 before proceeding. You may skip these two steps for other Windows versions.

1. Download and run the Microsoft .NET 3.5 installation file located at: https://www.microsoft.com/en-us/download/details.aspx?id=22

2. On the screen stating An app on your PC needs the following Windows feature, select

Download and install this feature.

If there is an existing version of NorthStar II installed on your computer, it must be uninstalled before proceeding.

The software may be delivered via USB drive or downloaded from the manufacturer’s website. Browse to the file location and double click on the .exe file to start the installation process.

1. Accept the license agreement by clicking on the I Accept radio button, and then click the Next button.

2. Enter your name and organization name, and click the Next button.

3. Verify that Typical is selected as the setup type, and click the Next button.

4. Confirm your selections by clicking the Install button.

If you use Windows® 7 or Windows® Vista, you may have to click Yes to the User Account Control.

Once installed, the icon will be available on your desktop and within your Start menu. Click on the icon to start the software.

If you receive a Windows Firewall has blocked

some features of this app message, click Allow

access.

You must allow firewall access for the software to communicate with the sign.

©EBSCO Sign Group

Document revision 11/16/2015

Page 6

NorthStar II User Manual

Display Setup

Depending on how the sign was purchased, displays can be network connected or USB-only.

Network connected displays must be installed and connected to your computer network before attempting to add them to the software. If you wish to use the software with a USBonly connection or without a display entirely, see the bottom section of this page.

1. Click the Choose Display button on the toolbar, or select Display > Connect to Display from the menu.

2. A window will appear with the

Select Display tab in front. Click the Add Display tab.

3. For network connected displays, click the Auto Detect button to search your network. Alternately, if you know the IP address of your display, you may type it into the IP Address field and click Check.

4. After the display is detected, click on the display you wish to add and then click Add Selected

Display.

5. Click on the Edit Displays tab.

Select the display you just added and click Make Active Display.

Add Display window

The technical information about your display such as the IP address should be available from your network administrator. Network configuration is the responsibility of the customer.

If you wish to use the software but don’t have a display installed on your network, enter the appropriate values into the Test Display or USB

Display box and click Add Display.

To add a USB display, you must have a USB drive inserted into the computer. For both Test and USB Displays, the settings must have the same pixel height and width as your real display to use any created playlists.

©EBSCO Sign Group

Document revision 11/16/2015

Page 7

NorthStar II User Manual

Creating a New Playlist

A playlist is a sequential list of text, images, and video clips that will be shown on your display. The playlist also contains information on duration, scheduling, and any transition effects selected.

To create a new playlist, select File > New Playlist. Enter a file name and click the Save button. This will create a new playlist with the correct dimensions for your display.

A playlist (“my_playlist.dsm”) being saved in the default folder

The playlists use the .dsm file extension. It is required that you save these files into the

Playlists folder. You may create as many playlists as you would like.

Do not email or otherwise share the .dsm file with other software users, as any images and video clips will not be included. See Managing and Sharing Playlists and Changing Playlist

Properties and Locations for more information.

Opening an Existing Playlist

If you have an existing playlist on your computer, it can be opened by selecting File >

Open Playlist, selecting the file and clicking the Open button.

The playlist will then be loaded into the software for editing.

A playlist (“my_playlist.dsm”) selected for opening

©EBSCO Sign Group

Document revision 11/16/2015

Page 8

NorthStar II User Manual

Screen Overview

The main screen for the software with a playlist open has the following sections:

1

3 4

2

5

6 7

8

1. Menu Bar – All functions of the software such as previewing, saving and transmitting a playlist are available from this bar.

2. Toolbar – Allows quick access to some of the more commonly used functions in the menu bar.

3. Font Selections – These controls allow you to select the font, size, style and color of text that will appear on your display.

4. Background and Border Selections – These controls allow you to select background color and border settings.

5. Frame Editor – This is where text, images and video clips are entered into the frame, as well as where previewing occurs. The frame duration and group information can also be set here.

6. Playlist View – A list of all existing frames in your playlist. Clicking on a line within the playlist view will select the frame for editing.

7. Frame Settings – These controls allow you to select incoming or outgoing transition effects.

8. Scheduling – These controls allow you to schedule an individual frame on a continuous, daily, weekly, monthly, or yearly schedule. You can also schedule frames to be triggered by temperature conditions.

©EBSCO Sign Group

Document revision 11/16/2015

Page 9

NorthStar II User Manual

Working with Frames

A frame is a single unit of a playlist that can contain static text, scrolling text, a still image or a video clip. A frame can be scheduled to be shown on a certain date and/or at a certain time, and can have a transition effect. A frame with a single line of centered text

The frames contained in your playlist can be seen in the Playlist View. The frame that is selected within the Playlist View can have its properties and contents edited. Frames can also be reordered by clicking and dragging them within this section of the screen.

Click and drag a frame up or down in the Playlist View to change the order

A new playlist opens with 16 blank frames.

However, frames can be added or removed as needed.

To insert a frame, select Edit > Insert Frame

Before or Edit > Insert Frame After. This will place a frame before or after the selected frame in the Playlist View.

Frames can have all of their contents removed by selecting Edit > Clear Frame.

A frame can be completely removed from the playlist by selecting Edit > Delete Frame.

Blank frames that have no text, images or video clips contained within them are automatically excluded from the playlist when it is transmitted to the display.

©EBSCO Sign Group

Document revision 11/16/2015

Page 10

NorthStar II User Manual

Frames can also be cut or copied, and then pasted elsewhere in the playlist. With a frame selected, click Edit > Cut Frame or Edit > Copy Frame.

Select a different location within the playlist and click Edit > Paste Frame.

The frame as seen in the Frame Editor can be made larger or smaller on your screen. This can make it easier to work with text and other elements. Select View > Frame Editor Scale, or press the Zoom In or

Zoom Out buttons in Font Selections bar to change the size of the frame editor.

Frame Editor scale changed from 1x to 3x

©EBSCO Sign Group

Document revision 11/16/2015

Page 11

NorthStar II User Manual

Adding Text to a Frame

With a frame selected in the Playlist

View, click within the Frame Editor in the middle of the screen and type in your desired text.

Font

The font, size and color of the text can be changed with the Font Selections controls near the top of the screen.

Font size can also be changed with the up and down arrow buttons on the Font

Selection bar.

Text set to size 26, green Times New Roman font

The fonts available within the software are the fonts that have been installed on your

Windows® system.

Text Style

Text can be made bold, italic, underline or have a strike-out by selecting the option from the toolbar. Text can also be left, center or right aligned to the display.

Text made bold, italic, underlined and centered horizontally

Text Position

Lines of text can also be moved by holding the Ctrl button on your

keyboard, clicking and dragging them to the desired location.

Text centered vertically by holding the Ctrl button,

and clicking and dragging the text

Text Color

Sections of text can be changed by highlighting them with the mouse, and then changing the text properties for that section.

Section of text made red by highlighting it with the mouse and changing the color

©EBSCO Sign Group

Document revision 11/16/2015

Page 12

NorthStar II User Manual

Multiple Lines

Multiple lines of text can be added to the frame by pressing the Enter button on your keyboard between lines. These lines can be sized, positioned and colored independently.

Scrolling Text

Scrolling text will move from right to left on the display. To enable or disable scrolling, select Text Style > Scroll

before typing your text. A red cursor indicates when a line is set to be scrolled.

Two lines of centered text with different colors

Text set to scroll across the display

If there is more than one line of text set to scroll within the same frame, the lines will scroll one at a time starting with the top line.

The speed that text scrolls across the screen can be adjusted selecting Slow, Medium or Fast from the Speed box. The number of times the message scrolls can be changed by setting the Repeat value.

Text Height

In addition to the font size box, the height of the text can also be adjusted by using LED Text Height. This value will change the selected line of text to be an exact number of pixels high, regardless of the font or size selected.

This feature is useful when maximizing the amount of text that will fit onto your display. For example, to fit 4 lines of text on a 32 pixel high non-virtual display, use the 7 pixel LED text height (with the

8 th pixel blank to separate the lines of text).

Various LED Text Heights on a 32 pixel high non-virtual display

Text Opacity

The opacity of text can be controlled by clicking the Opacity button and selecting a value. A value of less than 100 will allow some of the background to show through the text, with a value close to 0 being almost completely transparent.

©EBSCO Sign Group

Document revision 11/16/2015

Page 13

NorthStar II User Manual

Copy & Paste

If you have copied some text from another program such as Microsoft®

Word, you can paste it into a frame by selecting Edit > Paste From

Clipboard.

Spell Check

A spell check can be performed on all text within a frame, or across the entire playlist. Select Tools > Spell Check

Frame or Tools > Spell Check Playlist to check for misspelled words, which will be noted in a status box.

Bad Words Check

A check can be performed on all text within a playlist for profanity or other bad words. Select Tools > Bad Words

Check to start. Any caught items will be replaced with asterisks.

Find & Replace

You can also perform automatic text changes for a single frame or within the entire playlist. Select Edit > Find and Replace, and enter the word to be replaced and its replacement.

Optionally, you may attempt to match the capitalization of the text by selecting Match Case.

Counter

Text can be added to have a countdown to a specific date and time. Select Time

& Temperature > Insert Counter and select a target date and time from the dropdown box. Choose a unit of measure for how the counter will display.

You may also select the result to be in seconds, hours, minutes or days. Placeholder text will be inserted into the frame. However, the real value will be shown once transmitted to the display.

©EBSCO Sign Group

Document revision 11/16/2015

Page 14

NorthStar II User Manual

Adding Images to a Frame

The software allows you to add still images to be shown on your LED display. Images must be in JPEG,

GIF, BMP, PNG, TIFF or ICO format to work with the software. There are two different ways that images can be added to a frame:

Fitting an Image to the Frame

To size the image so that it takes up the entire frame, click Edit > Insert Image with a frame selected in the Playlist View.

Placing an Image on the Frame

To place an image at a particular location on the frame, click Edit > Insert

Image X,Y with a frame selected in the Playlist

View.

Browse to where the image file is located on the computer, select it and click Open.

Browse to where the image file is located on the computer, select it and click Open.

The image will be scaled to fit the entire frame. With your mouse, draw a square where you want the image to appear.

The image will be scaled and positioned within the square.

©EBSCO Sign Group

Document revision 11/16/2015

Page 15

NorthStar II User Manual

Once an image has been added to a frame, text can be entered on top of or next to the image.

The amount of detail that can be shown on your display is dependent on the matrix size.

Images that contain a large amount of detail may not show well on your LED display.

Adding Video Clips to a Frame

The software allows you to add video clips to be shown on your LED display. Video clips must be in AVI,

MP4, MOV, 3GP or WMV format to work with the software.

To add a video clip, click

Edit > Insert Video Clip with a frame selected in the

Playlist View.

Browse to where the video file is located on the computer, select it and click

Open.

The video clip will be scaled to fit the entire frame. The duration of the frame will be automatically set to the length of the video clip.

Once a video clip has been added to a frame, text can be entered on top of it.

The amount of detail that can be shown on your display is dependent on the matrix size.

Video clips that contain a large amount of detail may not show well on your LED display.

©EBSCO Sign Group

Document revision 11/16/2015

Page 16

NorthStar II User Manual

Special Instructions for Monochrome Displays

If your display is only capable of showing shades of red, special consideration must be made in selecting image and video clip files.

Because a monochrome display cannot show multiple colors, different colors of similar brightness will all show as red on the display.

It is best to use a grayscale image or video clip that only uses black, white and shades of gray. Other high-contrast colors are also acceptable.

If you are using a full-color image or video clip on a monochrome display, it is recommended to test it on the display or convert it into grayscale using photo editing software.



Because a monochrome display cannot show white, this image is displayed as entirely red.



A high contrast image in grayscale works well for a monochrome display.

©EBSCO Sign Group

Document revision 11/16/2015

Page 17

NorthStar II User Manual

Adding Date, Time and Temperature to a Frame

The software allows you to include the current date, time and temperature in a frame. The date and time are derived from an internal clock within the display, which is updated from the computer running the software. The temperature is derived from an attached temperature probe (if so equipped).

Date

To insert the date, with a frame selected click

Time and Temperature

> Insert Date and choose the date format you wish to use.

Time

To insert the time, with a frame selected click

Frame set to display the current month, day and year

Time and Temperature

> Insert Time and choose the time format you wish to use.

Temperature

To insert the temperature, with a frame selected click

Time and Temperature

> Insert Temperature and choose the temperature scale you wish to use.

This information can be combined onto one frame, and positioned as desired. Font, size and color options can be changed as with regular lines of text.

Frame set to display the current time in hours and minutes

Frame set to display the current temperature in Fahrenheit

Frame as seen in the software

Once transmitted to the display, this frame will always show the current date, time and temperature.

Frame as seen on the display

If the time or date is incorrect on your computer, it will be incorrect on the display.

It is recommended to use a time-syncing service on your computer.

©EBSCO Sign Group

Document revision 11/16/2015

Page 18

NorthStar II User Manual

Adding a Border and Background Color to a Frame

A border can be placed around the edge of a frame by selecting Place Border >

Outline Border.

Red outline border

A custom border can also be drawn onto the frame by selecting Place Border >

Custom Border. Draw a box with your mouse cursor where you want the border to be displayed.

The color and thickness of the border can be changed from the Border and Color selectors.

The background color of a frame can also be changed from the Background selector.

In this way, you can create multiple color combinations for your text frames.

Red custom border

Green background with red outline border

Text can be added to the frame and positioned at any location.

Black text on green background with red outline border

You cannot add a frame border to a frame that contains a video clip.

©EBSCO Sign Group

Document revision 11/16/2015

Page 19

NorthStar II User Manual

Adding an Outline to Text

Adding an outline can make text more readable, particularly when the text is overlaying an image or video clip.

1. Highlight the text you wish to add an outline to, and click the Outline control in the

Background and Border Selections toolbox.

2. Click on a color swatch to select the color of the outline. Custom colors are also available through the Custom button.

3. The Style of the outline may also be set. The options are: a. Outline – standard outline around the text. b. Outline Only – removes the fill color for the text and only leaves the outline. c. None – Removes the outline from the text.

4. The Thickness of the outline may also be set.

Thickness is measured in pixels.

To remove an existing outline from text, click the outline control and select a style of None.

©EBSCO Sign Group

Document revision 11/16/2015

Page 20

NorthStar II User Manual

Setting the Frame Duration

The amount of time that a frame is displayed can be changed in the Frame

Editor. With a frame selected, enter the duration with the drop-down box or by typing in any number. Duration is measured in seconds.

Duration time is not applicable to frames with scrolling text or video clips. These frames will automatically calculate their duration based on the frame contents.

Using Transition Effects

Transition effects are special visual effects that can be used between frames. These effects can create interest and draw attention to your message. With a frame selected, choose an incoming or outgoing effect in the Frame Settings. Transition effects will work with text, image and video clip frames.

Depending on the effect, other options may be available to customize the transition. For example, the

Spin effect selected above allows for changing options such as the direction (clockwise or counterclockwise) and length in seconds.

It is recommended to only use an Incoming Effect with frames, as transitioning from a frame with an Outgoing Effect to one with an Incoming Effect may not display as desired.

You can change the properties of several frames at the same time by holding down the Ctrl key on your keyboard and selecting multiple frames within the Playlist View.

©EBSCO Sign Group

Document revision 11/16/2015

Page 21

NorthStar II User Manual

Scheduling a Frame

Individual frames can be scheduled to be displayed on certain dates or at certain times. These frames will begin showing at their start time and stop at their end time. Schedules can be set for daily, weekly, monthly or yearly display; as well as being triggered by temperature information.

No schedule, shown in a continuous loop on the display (default setting)

Every day from 1:00pm to 2:00pm Every Monday from 8:00am to noon

Show when the temperature is below

32 degrees Fahrenheit

First day of every month, all day Every July 4 th from noon to 3:00pm

For any scheduled frame, an End By date can be set. This will cause the frame to “expire” and no longer be shown after the date.

If two or more frames are scheduled to show at the same time, they will rotate on the display. To have a frame take priority, adjust its

Priority setting to a higher number. During their overlapping schedules, only the frame(s) with the highest priority value will be shown.

Frames that do not have scheduling information are set as “Continuous” in the playlist. These frames are shown in order on the display in a continuous loop unless overridden by a priority scheduled frame.

There must be at least one frame in the playlist that does not have a schedule setting. This ensures that there is always something showing on the display.

©EBSCO Sign Group

Document revision 11/16/2015

Page 22

NorthStar II User Manual

Previewing, Saving and Transmitting Your Playlist

Previewing

After the frames are created within the playlist, you can preview it by selecting Display

> Preview Playlist or by clicking on the

Preview Playlist button. This will show your playlist within the Frame Editor.

You can also preview a single frame by selecting Display > Preview Frame. The preview can be stopped by selecting Display >

Stop Preview, by clicking on the Stop button, or by selecting a frame within the Playlist

View.

Saving

You may save your playlist at any time by selecting File > Save Playlist. This will store a local copy of the playlist on your computer for later use within the software.

Transmitting Over a Network Connection

If your sign has a network connection, you may transmit the message directly from the computer.

When you are ready to transmit the playlist to your display, click Display > Transmit Playlist and select the side you wish to use. In this way, different information can be shown on each side of a doublesided display. The Transmit Playlist button can also be used.

After the playlist has been successfully transmitted, the display will run it using an onboard processor. You may close the program or shut down the computer at any point without affecting the display.

Updating via USB Drive

If your sign is equipped with an external USB port, you may update the display using a USB drive.

Insert the USB drive into your computer, and click (the

USB drive icon) to export the current playfile. Select the correct drive letter and click Export to transfer the playfile.

Bring the drive out to the sign and plug it into the USB port.

The display will alert you when the playlist transfer is complete. Remove the drive from the sign.

Currently, only updating both sides of the display is supported.

©EBSCO Sign Group

Document revision 11/16/2015

Page 23

NorthStar II User Manual

Managing and Sharing Playlists

To manage your existing playlists, select File > Manage Playlists from the menu.

From this window, you can delete a playlist, export a playlist and all associated media to a single file for sharing, or import a new playlist that had been exported elsewhere.

To delete a playlist, simply select it and click Delete Playlist.

In order for your playlists to be shared, they must first be exported to a

Package (PAK) file. This process bundles any images and video clips into a single file for easy transfer.

Select the playfile you wish to export and click Export Package. Select a file location, type in a name for the file, and click the Save button.

This will create a file with the .pak extension. You may email or share this file with anyone else using the software.

To bring in a Package file that was previously exported, click the Import

Package button. Browse to the .pak file location, select it and click the

Open button.

This will import the playlist into the

Manage Playlists folder. The new playlist must have a different filename than the existing playlists in the list.

©EBSCO Sign Group

Document revision 11/16/2015

Manage Playlists window

Page 24

NorthStar II User Manual

Changing Playlist Properties and Locations

After creating a playlist, it may become necessary to adjust its size to work with a specific display. This is typically only necessary when working in a multi-display environment. To change the size, select File > Properties from the menu.

Enter the new values and click OK.

Playlist Properties window

By default, all playlists are saved on your computer’s hard drive. However, you may want to move your playfiles to a network location where multiple users can access and edit them.

To move your playfiles onto a network, select File > Set Network Path. Click

Choose Location and browse to the network location where you would like your playfiles to reside. Once selected, click OK.

Choose Network Location window

Your playlists will now be stored in the network location from this point forward. Other software users must add this same setting to manage the playlists.

To go back to storing your playfiles locally, click Reset Back to Default in the Choose Network Location window.

©EBSCO Sign Group

Document revision 11/16/2015

Page 25

NorthStar II User Manual

Adjusting Brightness and Power Settings

To change the brightness settings of your network connected display, select

Display > Settings from the toolbar.

Brightness can be set to a single setting, or use a schedule of settings over 24 hours.

• Use Brightness Settings – Choose this option to maintain the same setting over 24 hours.

• Use Brightness Schedule – Choose this option to create four time ranges with different settings. The

Brightness Schedule can also be used to turn the LED display off and on at certain times.

Display Settings window

The “Automatic” selection uses an ambient light sensor to determine the display brightness.

This selection will automatically brighten the display during the day to compete with the sun, and dim it for evening and night-time use.

Example settings:

Brightness setting set to automatic throughout the day

(recommended)

It is recommended to leave the brightness at “Automatic” whenever possible in order to utilize the full capabilities of your display.

Brightness schedule with the sign off between midnight and

6am, level 5 between 6am and noon, level 10 between noon and 6pm, and level 5 between 6pm and midnight.

©EBSCO Sign Group

Document revision 11/16/2015

Page 26

NorthStar II User Manual

Working with Multiple Displays

If you have multiple network connected displays that are compatible with the software, they can each be controlled from a single computer. You must first add each display using the instructions in the

Display Setup chapter.

Click the Choose Display button or select Display >

Select Display.

Choose the display you wish to work with, and click the Use

With Playlist button.

You are now ready to start working with this display. New playlists that are created will have the dimensions of the selected display. Playlists that are transmitted will be sent to the selected display.

Working with Frame Groups

Individual frames can be a member of one or more groups within a playlist. These groups can make it easier to work with and organize playlists that have a large number of frames.

Viewing Groups

To view frames that are a member of a particular group, select the group name from the Groups drop-down box in the Frame Editor. There are several groups that are available by default. This will filter the frames shown in the Playlist View to only those frames within that group.

Adding Groups

Frames can also be manually set into custom groups. Type in a Group Name to assign a frame into a group. The group will be created if it does not already exist.

This group will now be available for selecting under the Groups drop-down box.

To return to viewing all frames regardless of group, select All from the Groups drop-down box.

©EBSCO Sign Group

Document revision 11/16/2015

Page 27

NorthStar II User Manual

Viewing Display Information

Technical information about your display can be accessed with the software. This information can be useful to a technician when diagnosing an issue. With a display connected, click Display > Sign Info to view the diagnostics information. If you have a USB-only display, first plug a USB drive into the sign to automatically download the information. Plug the drive into your computer and then run the Sign

Info application.

Remote Viewing of Display Content

This feature allows you to view what is currently showing on your network connected display. Click View > Sign Display from the menu and select a side. The display content will show within the Frame

Editor.

Updating the Display’s Firmware

Firmware is simply the code that runs inside of the display. At times the firmware may require an update, such as when upgrading to the newest version of the software. It is recommended to upgrade the firmware only when required to do so.

The proper version of firmware comes bundled with the software. By having the most up-todate version of software, you will have access to the most up-to-date version of firmware.

Network Connected Displays

1. Click Tools > Update Firmware from the menu.

2. The new firmware file will be automatically selected. This file will be named “ jmsXX.bin

”, where

XX

is the version number of the firmware.

3. Click Upload Firmware. The firmware will now be uploaded and installed on the selected display.

Please allow time for the firmware to install and the display controller to reboot.

4. The software will attempt to re-establish communication with the display during this time. If the display cannot be detected by the 12 th attempt, turn power off to the display for 10 seconds and then back on to reboot it.

5. To verify that the firmware update was successful, click Display > Sign Info and look for the firmware version. The last two digits should match the two digits in the firmware file in step 2.

USB-Only Displays

For USB-only displays, speak with a technical support representative on updating your sign’s firmware.

©EBSCO Sign Group

Document revision 11/16/2015

Page 28

NorthStar II User Manual

Changing the Display’s Name Settings

The display’s name, as well as the name of each side of a double-sided display, can be customized to your liking. On a double-sided sign, “Side A” refers to the side of the sign where the electrical connection is on the right-hand side.

Customized display and side names are locally stored and will only be seen on the computer where they are set.

1. Click the Choose Display button, or click Display > Connect to Display from the menu.

2. In the Edit Displays tab, click on the display you wish to change.

3. Enter the new Display Name, Side A

Name and Side B Name of the display

(if applicable), and click Change Name

Settings. Close and reopen the software for the changes to take full effect.

Changing the Display’s Network Settings

The display’s network information can be changed from the software. This is typically done when the display is first set up to communicate with your computer network.

Do not change network settings unless instructed by a support technician or your IT department.

1. Click the Choose Display button, or click Display > Connect to Display from the menu.

2. In the Edit Displays tab, click on the display you wish to change.

3. Enter the new IP Address, Subnet

Mask, Default Gateway and DNS

Servers of the display, and click Change

Network Settings. The display will now reboot with the new settings.

©EBSCO Sign Group

Document revision 11/16/2015

Page 29

NorthStar II User Manual

Changing the Display’s Date and Time Settings

If you wish to change the date and time on the display to a specific value, select Tools > Set Sign Clock from the menu.

Enter the new date and time values that you wish to set.

Network Connected Displays

For network connected displays, click Send Time. This will send the new information directly to the display, and no further action is required.

USB-only Displays

For USB-only displays, make sure that a USB drive is inserted into the computer, select the correct drive letter, and click Send

Time. This will place the selected date and time settings onto the USB drive.

At that time, plug the USB drive into the sign. The display will alert you when the settings have been transferred. You may wish to set the time a few minutes forward to accommodate for travel time. Time settings are deleted from the USB drive after they are transferred.

Setting the Time Zone

You may set the time zone for network connected displays by clicking Tools > Set Time Zone. This will present you with a list of time zones to choose from.

Select the appropriate item and click Set Time Zone.

This option is not available for USB-only displays.

©EBSCO Sign Group

Document revision 11/16/2015

Page 30