S&t embedded FLATMAN Monitor User Manual

FLATMAN Monitor – User Manual

Customer: Standard

User Manual (Version 1.3)

s&t embedded GmbH – Gutenbergstr. 2 – 85737 Ismaning - Germany

Phone: +49 89 370058 – 0 Fax: +49 89 37000 689

Mail to: [email protected] www.snt-embedded.de

V1.3


This page is intentionally left blank.


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689

Mail to: [email protected] www.snt-embedded.de V1.3

2


1 Table of Contents

1 Table of Contents ..................................................................................................................... 3

2 Introduction .............................................................................................................................. 4

2.1

Symbols used in this Manual ............................................................................................................... 4

2.2

Important Instructions .......................................................................................................................... 4

2.3

Note on the Warranty ........................................................................................................................... 4

3 General Safety Instructions ..................................................................................................... 5

4 Electromagnetic Compatibility ................................................................................................ 6

4.1

Electromagnetic Compatibility EU ....................................................................................................... 6

4.2

Electrostatic Discharge (ESD) ............................................................................................................. 6

4.2.1

Grounding Methods ......................................................................................................................... 6

5 Scope of Delivery (options) ..................................................................................................... 7

5.1.1

Type Label and Product Identification ............................................................................................. 8

6 Product Description ................................................................................................................. 9

6.1

Product view ........................................................................................................................................ 9

7 Technical Data / Environmental Specification...................................................................... 11

7.1

Order Information ............................................................................................................................... 12

7.2

CE Directives and Standards CE Directives ...................................................................................... 12

8 Mechanical Specifications ..................................................................................................... 13

8.1

Dimension Drawing ............................................................................................................................ 13

8.1.1

10.4“ built-in-variant .................................................................................................................... 13

8.1.2

10.4“ full metal ............................................................................................................................. 13

8.1.3

12.1“ built-in-variant .................................................................................................................... 14

8.1.4

12.1“ full metal ............................................................................................................................. 14

8.1.5

15.0“ built-in-variant .................................................................................................................... 15

8.1.6

15.0“ full metal ............................................................................................................................. 15

8.1.7

15.6“ built-in-variant .................................................................................................................... 16

8.1.8

15.6“ full metal ............................................................................................................................. 16

8.1.9

17.0“ built-in-variant .................................................................................................................... 17

8.1.10

17.0“ full metal ......................................................................................................................... 17

8.1.11

18.5“ built-in-variant ................................................................................................................ 18

8.1.12

18.5“ full metal ......................................................................................................................... 18

8.1.13

19.0“ built-in-variant ................................................................................................................ 19

8.1.14

19.0“ full metal ......................................................................................................................... 19

8.1.15

21.5“ built-in-variant ................................................................................................................ 20

8.1.16

21.5“ full metal ......................................................................................................................... 20

9 Connectors ............................................................................................................................. 21

9.1

PWR: Input Power Connector ........................................................................................................... 21

9.2

OSD Keypad ...................................................................................................................................... 21


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


3


9.2.1

Power Button ................................................................................................................................. 21

9.2.2

LED Power indicator ...................................................................................................................... 21

9.2.3

Up Button Down Button ................................................................................................................ 22

9.2.4

Select Button .................................................................................................................................. 22

9.2.5

Menu Button ................................................................................................................................... 22

9.3

DVI connector .................................................................................................................................... 22

9.4

Display Port connector ....................................................................................................................... 23

9.5

USB client connector (Type B) .......................................................................................................... 23

10 Technical Support .................................................................................................................. 24

10.1

Warranty ............................................................................................................................................ 24

10.2

Returning Defective Merchandise ..................................................................................................... 24

2 Introduction

2.1

Symbols used in this Manual

This symbol point out to especially information.

2.2

Important Instructions

This chapter contains instructions which must be observed when using your Flatman Monitor.

The manufacturer’s instructions provide useful information on your device.

2.3

Note on the Warranty

Due to their limited service life, parts which by their nature are subject to a particularly high degree of wear

(wearing parts) are excluded from the warranty beyond that provided by law. This applies to the CMOS battery, for example.


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


4


3 General Safety Instructions

The ext. supply shall meet the criteria for SELV / LPS (Safety Extra-low Voltage / Limited Power Source, LPS) acc. UL 60950-1.

It must be assumed that safe operation is no longer possible, if the device has visible damage or if the device no longer functions. In these cases the device must be shut down and secured against unintentional operation.

Please read this section carefully and observe the instructions for your own safety and correct use of the device. The chapter also contains information on approval and interference suppression of your device.

Observe the warnings and instructions on the device and in the manual.

In order to maintain this condition and ensure safe operation, the user must observe the instructions and warnings contained in this manual.

•

The device must be used in accordance with the instructions for use.

•

The electrical installations in the room must correspond to the requirements of the local (countryspecific) regulations.

•

Take care that there are no cables, particularly power cables, in areas where persons can trip over them.

•

Only use the power cord supplied. Don’t use injured or damaged power cords.

•

For DC power connection:

The DC power source should be able to be switched off and on via an isolating switch.

The unit is only completely disconnected from the DC main power source, when the DC power cord is disconnected either from the power source or the unit. Therefore, the DC power cord and its connectors must always remain easily accessible.

•

For AC power connection via external AC/DC adapter:

The main power cable of the external AC/DC adapter serves as disconnecting device. For this reason the outlet of the AC power source must be located near to the device and be easily accessible.

•

Do not place the device in direct sunlight, near heat sources or in a damp place. Make sure the device has adequate ventilation.

•

Only devices and components which fulfill the requirements of an SELV circuit (safety extra low voltage) in accordance with EN60950 may be connected to the interfaces of the system.

•

All plugs on the connection cables must be screwed or locked to the housing.

•

The device generates heat during operation. Make sure it is adequately ventilated. Do not cover the air intake and exhaust openings of the device.

•

Repairs may only be carried out by qualified specialist personnel authorized by S&T.

•

Maintenance or repair on the open device may only be carried out by qualified personnel authorized by SNT which is aware of with the associated dangers.

•

When accessing internal components the device must be switched off and disconnected from the power source.


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


5


4 Electromagnetic Compatibility

4.1

Electromagnetic Compatibility EU

This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility. If the user modifies and/or adds to the equipment (e.g. installation of add-on cards) the prerequisites for the CE conformity declaration (safety requirements) may no longer apply.

Generic standards - Emission standard for residential, commercial and light-industrial environments

(Emission): EN 61000-6-3

Emission of Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement: EN 55022/B

ITE - Immunity characteristics - Limits and methods of measurement: EN 55024

4.2

Electrostatic Discharge (ESD)

A sudden discharge of electrostatic electricity can destroy static-sensitive devices or micro-circuitry. Therefore proper packaging and grounding techniques are necessary precautions to prevent damage. Always take the following precautions:

•

Keep electrostatic sensitive parts in their containers until they arrive at the ESD-safe workplace.

•

Always be properly grounded when touching a sensitive board, component, or assembly.

4.2.1 Grounding Methods

The following measures help to avoid electrostatic damages to the device:

•

Cover workstations with approved antistatic material. Always wear a wrist strap connected to workplace as well as properly grounded tools and equipment.

•

Use antistatic mats, heel straps, or air ionizers for more protection.

•

Always handle electrostatically sensitive components by their edge or by their casing.

•

Avoid contact with pins, leads, or circuitry.

•

Turn off power and input signals before inserting and removing connectors or connecting test equipment.

•

Keep work area free of non-conductive materials such as ordinary plastic assembly aids and styrofoam.

•

Use field service tools such as cutters, screwdrivers, and vacuum cleaners which are conductive.

•

Always place drives and boards PCB-assembly-side down on the foam.


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


6


5 Scope of Delivery (options)

This chapter describes the components which can be optionally ordered and delivered:

Qty Part# Part Description

1 s. order information

Flatman Monitor

1

EE04-100001-01 Phoenix Power Subcon w/ housing

1

840-0598

1

840-0039

1

840-0273

Adapter VGA / DVI

VGA/SVGA cable 1,8m/2,0m

USB-cable 1,8m, Type A – Type B

1

840-0134 DVI-cable 2m

1

840-0758 Display-Port-cable 1,8m

1

840-0059 EU-Powercord 1,8m

1

ER40-100001-01 Set Power supply 24VDC /w Phoenix

Connector


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


7


5.1.1 Type Label and Product Identification

Product and Package Label, size 85 x 35mm, polyester matt silver

Technical data, depending on device

Description, depending on device

Barcode Part#

Part# (s. chapter 7.1)

Barcode Series#

Series#

(11 numeric digits, xxxxxxyyccc)

Certification print, depending on device internal use only!


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


8


6 Product Description

6.1

Product view

Front View Description

Bottom View Description – built-in-variant

OSD Keypad

Display Port

Connector

Power LED

LAN (option only)

LPC (option only)

TFT Display with resitive Touch

Front plate

Rear cover

Mounting clips

Sealing cord

USB Connector

Power Connector

(insert for Power Supply)

DVI Connector


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


9


Bottom View Description – full metal-variant

OSD Keypad

Power LED

LAN (option only)

LPC (option only)

Rear cover

Display Port

Connector

DVI Connector

USB Connector

Power Connector

(insert for Power Supply)


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


10


7 Technical Data / Environmental Specification

Display size

Display manufacturer

Display type

Resolution

Format

Contrast Ratio

Brightness

Angle View

Colors

LED Lifetime (> 50%, 25°C)

Dimensions (WxHxD - mm)

Weight

Touch Options

10.4“

Innolux

G104AGE-L02

800x600

4:3

700:1

400cd

H160° / V140°

16.7 million

> 50.000h

297 x 244 x 65

~ 3,9kg

12.1“

Innolux

G121AGE-L03

800x600

4:3

1500:1

450cd

H178° / V178°

16.7 million

> 50.000h

338 x 277 x 65

~ 4,7kg

12.1“ XGA

Innolux

15.0“

Innolux

G121X1-L03

1024x768, XGA

4:3

700:1

600cd

H160°/ V140°

16.7 million

> 50.000h

G150XGE-L04

1024x768

4:3

700:1

400cd

H160° / V140°

16.7 million

> 50.000h

338 x 277 x 65

~ 4,7kg

396 x 312 x 69

~ 6,4kg w/o / PCAP / resistive

15.6“

Innolux

G156BGE-L01

1366x768, HD

16:9

500:1

300cd

H160° / V160°

16.7 million

> 50.000h

432 x 281 x 74

~ 6,7kg

Display size

Display manufacturer

Display type

Resolution

Format

Contrast Ratio

Brightness

15.6“ Full HD

AUO

17.0“

AUO

G156HTN02.0 G170EG01V1

1920x1080, Full HD

1280x1024

16:9 5:4

500:1

400cd

800:1

350cd

Angle View

Colors

LED Lifetime (> 50%, 25°C)

H140° / V120°

16.2 million

> 50.000h

Dimensions (WxHxD - mm)

432 x 281 x 74

Weight

Touch Options

~ 6,7kg

18.5“

Innolux

G185BGE-L01

1366x768, HD

16:9

19.0“

AUO

G190ETN01.2

1280x1024

5:4

1000:1

300cd

H160° / V140°

H178° / V170°

16.7 million

16.7 million

> 50.000h

> 50.000h

427 x 360 74

~ 7,8kg

500 x 321 x 74

~ 8,6kg

1000:1

350cd

H160° / V150°

16.7 million

> 50.000h

473 x 396 x 68

~ 9,4kg w/o / PCAP / resistive

Fastening

Color

Video IN

I/O Options

Power Supply

Cooling

Operating Temperature

Storage Temperature

Humidity

Operating Altitude

Storage Altitude

Certification

Protection class

VESA 75/75 or 100/100 (full metal housing only); fastening clips (built-in-variant only)

RAL 7021 (black anthracite)

1x DVI, 1x Display Port

USB2.0 client (Type B); LPC (Option), LAN (option)

16-30VDC Input via Phoenix Connector PSC 1,5/3-F

Fanless passive cooling

0°C - 50°C ambient

-10°C - 60°C ambient

10%-90% @ 39°C, non condensing

Up to 3000 m (9900 ft)

Up to 5000 m (16500 ft)

CE, cULus

Front: IP65, Housing IP20

21.5“

AUO

G215HVN01.0

1920x1080, Full HD

16:9

3000:1

300cd

H178° / V178°

16.7 million

> 50.000h

575 x 367 x 74

~ 10,7kg

EMC

EN55022 class B


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


11


7.1

Order Information

Example:

EN00-Z41300-01

(FLATMAN Monitor 15.6“ with resistive touch in full metal housing)

E N 0 0 - y y y y y y - x x

1 2 3 4

5

6

1 = 10.4“

2 = 12.1“

3 = 15.0“

4 = 15.6“

5 = 17.0“

6 = 18.5“

7 = 19.0“

8 = 21.5“

- Touch Technology: 0 = without touch, only with protection glass

1 = Touch resistive

2 = Touch PCAP

3 = with protection glass and stainless steel front

4 = Touch resistive and stainless steel front

5 = Touch PCAP and stainless steel front

6 = Touch PCAP – V2

7 = without touch, only with protection glass – V2

- Mounting Variant: 3 = Monitor full metal

4 = Monitor built-in-mounting counted on demand for several options

(e.g. display option full HD; XGA; …)

7.2

CE Directives and Standards CE Directives

Low Voltage Directive (Electrical Safety)

EMC Directive

RoHS II Directives

2006/95/EC

2004/108/EC

2011/65/EU


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


12


8 Mechanical Specifications

8.1

Dimension Drawing

8.1.1 10.4“ built-in-variant

8.1.2 10.4“ full metal


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


13



8.1.4 12.1“ full metal


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


14



8.1.6 15.0“ full metal


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


15



8.1.8 15.6“ full metal


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


16



8.1.10 17.0“ full metal


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


17



8.1.12 18.5“ full metal


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


18



8.1.14 19.0“ full metal


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


19



8.1.16 21.5“ full metal


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


20


9 Connectors

9.1

PWR: Input Power Connector

Pin Signal

1 2 3

1 GND

2

3

9.2

OSD Keypad

Shield

VCC (24VDC only!)

Mating connector

Phoenix Contact

PSC 1,5/ 3-F

Order# 1841909

With the self explaining OSD ( On Screen Display ) you can modify the settings and control the special features of the CRTtoLCD-Controller. The OSD uses a number of menus for making changes and turning the special features on or off. The configuration can be done via the OSD-keypad

9.2.1 Power Button

Press this button to turn on or off the device.

9.2.2 LED Power indicator

LED

off green yellow

function

No Power active

Standby


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


21


9.2.3 Up Button Down Button

To select an tab, simply use the button “UP” or ”DOWN” to move the cursor to the tab you want

9.2.4 Select Button

If you have chosen the tab you want press the button “select”.

9.2.5 Menu Button

Press the button “Menu” to open the OSD menu.

9.3

DVI connector

(front view):

Pin Signal

5

6

7

8

1

2

3

4

Rx2-

Rx2+

GND n.c. n.c.

SCL

SDA n.c.

C1 RED

C2 GREEN

Pin Signal

13

14

15

16

9

10

11

12

C3

C4

Rx1-

Rx1+

GND n.c. n.c.

+5V

GND

HP

BLUE

HSYNC

Pin Signal

21

22

23

24

17

18

19

20

C5

C5-

Rx0-

Rx0+

GND n.c. n.c.

GND

RxC+

RxC-

GND

GND


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


22


9.4

Display Port connector

Pin Signal

1 TX0+

2

3

4

5

GND

TX0-

TX1+

GND

6

7

8

9

TX1-

TX2+

GND

TX2-

10 TX3+

9.5

USB client connector (Type B)

(front view):

2

1

Pin Signal Name

1 +USB_VCC

3

4

2

3

4

USB_D-

USB_D+

GND

Internal connected to the touch controller.

Connect this port to your PC with USB cable part#

840-0273.

Pin Signal

11 GND

16

17

18

19

20

12

13

14

15

TX3-

GND

GND

AUX+

GND

AUX-

HPD

GND

PWR


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


23


10 Technical Support

For technical support, please contact our Technical Support department: e-mail:

[email protected]

Phone: +49 (0)89 37 00 58 - 0

Make sure you have the following information on hand when you call:

• the unit part id number (PN)

• the serial number (SN) of the unit;

(the serial number can be found on the type label, placed on the rear side of the system)

Be ready to explain the nature of your problem to the service technician.

10.1

Warranty

There is a protection label on your Flatman Monitor.

If you open the device, the warranty is lost!

10.2

Returning Defective Merchandise

Please follow these steps before you return any merchandise to S&T Embedded GmbH:

1. See information on our website: http://www.snt-embedded.de/support/88436.de.php

2. Download the RMA corresponding form and fill it out, describe the fault that has occurred.


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


24


3. When returning a device:

•

Pack it securely in its original box.

•

Enclose RMA form with the consignment.

4. Sent the device to the following adress: s&t embedded GmbH

RMA support

Gutenbergstr. 2

D- 85737 Ismaning

(If you send more than one device in a package fill out a form for each device!)

5. After receiving your device at s&t you will get a confirmation of the order via email to the adress which is above-named on the form. This order number is your RMA number.


Phone: +49 89 370058 – 0 Fax: +49 89 37000 689


25

S&t embedded FLATMAN Monitor User Manual

Assistant Bot

Customer: Standard

1 Table of Contents

2 Introduction

2.1

Symbols used in this Manual

2.2

Important Instructions

2.3

Note on the Warranty

3 General Safety Instructions

4 Electromagnetic Compatibility

4.1

Electromagnetic Compatibility EU

4.2

Electrostatic Discharge (ESD)

5 Scope of Delivery (options)

6 Product Description

6.1

Product view

Front View Description

Bottom View Description – built-in-variant

Bottom View Description – full metal-variant

7 Technical Data / Environmental Specification

7.1

Order Information

7.2

CE Directives and Standards CE Directives

8 Mechanical Specifications

8.1

Dimension Drawing

9 Connectors

9.1

PWR: Input Power Connector

9.2

OSD Keypad

9.3

DVI connector

9.4

Display Port connector

9.5

USB client connector (Type B)

10 Technical Support

[email protected]

10.1

Warranty

10.2

Returning Defective Merchandise

Key Features

Frequently Answers and Questions

What are the available sizes and resolutions for the FLATMAN Monitor?

What are the mounting options for the FLATMAN Monitor?

What are the key features of the FLATMAN Monitor?

What is the purpose of the OSD keypad?

Related manuals

S&T embedded

Rail-PC-5101

LG

H160 Tab-Book

S&T embedded

FLATMAN PRO

Symphony

V140

INNOLUX

RIC 43G

S&T embedded

FS 190SBxxDDxx

kontron

FlatClient PRO

ASEM

MP 12,1"

kontron

FlatClient RCK

ESA

ERGO322A Series

Aries Embedded

M100PFEVP

SSV

MGW/865