⑥

Wireless Speaker (BTS-68N)

Thank you for purchasing the Valore Wireless Speaker.

Enjoy 10 hours of clear and powerful music playback with a single charge. Press a single button to extend the concealed left and right speakers from the main body.

Important: Please read the user manual thoroughly before using your wireless speaker.

Specifications: Package Contents:

• Built-in battery: Lithium-ion battery 3.7V/1100mA • Wireless speaker

• Wireless range: Up to 10m • USB charging cable

• Power input: DC5V • Auxiliary Cable

• Power output: 2 x 3W

• Charging time: 3.5 hours

• Playback time: 10 hours

• Material: ABS + Aluminium

• Dimension (L x W x D): 160 x 72 x 67mm

• Weight: 335g

UNDERSTANDING THE PRODUCT

⑤

①

②

③

④

⑦

⑧

⑨ ⑩

① Backward button

② Volume‘ + ’

③ Play/Pause and hands-free button

④ Forward button

⑤ Speaker release button

⑥ LED indicator

⑦ Microphone

⑧ Volume ‘ – ’

⑨ Micro USB port

⑩ Aux in

START USING THE WIRELESS SPEAKER

1) Charging the speaker

Press the “Speaker release button” to extend the concealed left and right speakers from the main body. Plug the micro USB cable into the charging port located at the back of the wireless speaker and connect it to a wall plug. A red LED indicator will turn on when the speaker is charging. The red LED light will switch to blue when speaker is fully charged. To fully charge the speaker, it will require at least 3.5 hours.

Note: Please charge the speaker for at least 8 hours before first use. Please make sure that the speaker is switched off when charging is in progress.

2) Pairing the wireless speaker (switched off)

Step 1: Press the “Speaker release button” to extend the concealed left and right speakers from the main body and the blue LED light flashes

Step 2: Activate Bluetooth function on your mobile device to begin pairing with speaker.

Step 3: Connect to the speaker by selecting ‘Valore BTS-68N’ under the device list.

Step 4: Once connected, the LED light at the Bluetooth button will indicate solid Blue.

Note: If the pairing is not successful, please turn off wireless speaker first, and then re-pair again. After pairing is successful, paired devices will remember each other. Unless pairing information is deleted because of new pairing, no need to pair when using the next time.

If you want to pair the wireless speaker with other devices, please turn off Bluetooth function of existing source device, and pair the wireless speaker with the new device according to steps 1-4 mentioned above.

3) Re-pairing the wireless speaker

Each time the wireless speaker is turned on, it will attempt to connect to the last device it was paired with automatically (mobile device with Bluetooth function turned on).

The wireless speaker will do as follows:

1. Connect to last connected devices automatically;

2. Be listed in the screen of devices as an output channel. Select ‘Valore BTS-68N’ as the

output channel to play music.

Note: In some cases, the speaker may need to be manually selected from your operating system sound or hardware output list.

4) Answering a phone call via the wireless speaker

Step 1: To pick up an incoming call, press the Hands-free button once to answer via the

wireless speaker.

Step 2: Press again to end a call.

Step 3: Press the volume buttons to adjust the volume of the call.

Step 4: Press and hold the Hands-free button to switch back to the music audio mode.

5) Connect via auxiliary cable

You may also connect to the wireless speaker via the provided auxiliary cable with your mobile device to enjoy music of the same sound quality.

6) Wireless speaker controls a) Volume

  • Control the volume via the Bluetooth device itself;

  • Control the volume by press and hold the Volume +/- buttons b) Play and Pause music

  • Press Play/Pause button to pause the music

  • Press again to resume playback

3) Re-pairing the wireless speaker

Each time the wireless speaker is turned on, it will attempt to connect to the last device it was paired with automatically (mobile device with Bluetooth function turned on).

The wireless speaker will do as follows:

1. Connect to last connected devices automatically;

2. Be listed in the screen of devices as an output channel. Select ‘Valore BTS-68N’ as the

output channel to play music.

Note: In some cases, the speaker may need to be manually selected from your operating system sound or hardware output list.

4) Answering a phone call via the wireless speaker

Step 1: To pick up an incoming call, press the Hands-free button once to answer via the

wireless speaker.

Step 2: Press again to end a call.

Step 3: Press the volume buttons to adjust the volume of the call.

Step 4: Press and hold the Hands-free button to switch back to the music audio mode.

5) Connect via auxiliary cable

You may also connect to the wireless speaker via the provided auxiliary cable with your mobile device to enjoy music of the same sound quality.

6) Wireless speaker controls a) Volume

  • Control the volume via the Bluetooth device itself;

  • Control the volume by press and hold the Volume +/- buttons b) Play and Pause music

  • Press Play/Pause button to pause the music

  • Press again to resume playback c) Next and Previous track

  • Press Forward button to go to next track

  • Press Backward button to go to previous track

TROUBLESHOOTING

Issue 1:Speaker is unable to connect successfully to your mobile device

Problem 1: Speaker’s battery is flat

Solution: Fully charge the speaker (3.5 hours) and retry connection with your mobile device.

Problem 2: Speaker not paired to your mobile device

Solution: Make sure that the speaker is successfully paired upon selecting ‘Valore BTS-68N’ in the device list.

Problem 3: Speaker and mobile device too far apart

Solution: Make sure that the speaker is within a metre range during pairing and connection.

Problem 4: Speaker is connected to other mobile device

Solution: Make sure that the speaker has already been disconnected before making a new

connection with a new device.

Issue 2: Sound from the speaker is too soft or silent

Problem 1: Speaker’s battery is low / flat

Solution: Fully charge the speaker (3.5 hours) and retry connection with your mobile device.

Problem 2: Speaker or mobile device’s volume is too low

Solution: Turn the volume of the speaker or mobile device up to increase the volume.

Problem 3: Music track may not be audible

Solution: Make sure that the music track is of a playable format for the mobile device.

Problem 4: Speaker and mobile device might not be connected properly.

Solution: Repeat the connection step via Bluetooth/auxiliary cable again to make sure that it

is connected properly and try again.

TECHNICAL SUPPORT & WARRANTY

• For Technical Support, email us at [email protected].

• For Warranty Registration, visit www.valore.sg.

Cautions:

Read all the instructions and warnings carefully prior to using this product.

• Do not store the speaker in a high temperature environment.

• Do not place the speaker near a fire or other excessively hot environments.

• Do not expose this speaker to moisture or submerge it in liquid. Keep speaker dry at all

times.

• Do not attempt to charge the speaker using any other method or connection other than the

speaker’s provided charging cable.

• Do not disassemble this speaker or attempt to repair or modify it in any manner.

• Be cautious of excessive drops, bumps, abrasions or other impacts to this speaker. If there

is any damage to the speaker such as dents, punctures, tears, deformities or corrosion, stop

using the speaker and contact us immediately via email at [email protected], or return this

product to the store where you have purchased it from.

• If the product produces an abnormal smell, high temperature (low temperature during

normal use), discolours or changes shape abnormally, stop using the product and contact us

immediately via email at [email protected].

DISCLAIMER & TRADEMARKS

All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and communications statutes.

The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered trademarks and service marks of Valore and others. All other registered and unregistered company names, product names and marks mentioned herein the (“Materials”) are the property of their respective owners and may be trademarks or registered trademarks.

Inspired by Valore Singapore

For full range of Valore products visit www.valore.sg