SR-1009FA SR-2819T8 RF RGBW Controller, SR-1009FA, SR-1009EA, SR-1009FA3, SR-1009FA7 Receiver User Manual
Below you will find brief information for SR-1009FA SR-2819T8, SR-1009FA SR-1009FA, SR-1009EA SR-1009EA, SR-1009FA3 SR-1009FA3. This manual provides instructions on how to install and operate the RF RGBW Controller SR-1009FA SR-2819T8. It also includes information on the various receivers that can be used with the controller. The SR-1009FA SR-2819T8 allows you to control up to 8 zones of LED lighting. You can also create a variety of color effects, with each zone independently controlled by the receiver.
advertisement
RF RGBW Controller
SR-2819T8 with SR-1009FA series
8 zones,long press can turn on/off each zone
Press-button RGBW controller
Receivers work with WIFI-RF convertor to be controlled by smart phone
5
Parameter
Remote
Part No.
SR-2819T8
Receiver
Part No.
SR-1009FA
SR-1009EA
SR-1009FA3
SR-1009FA7
Product Size
Operation Voltage
4.5VDC
Iuput Voltage
12-36VDC
12-36VDC
12-36VDC
12-36VDC
Operation
Frequency
434MHz/868MHz
Current
4x5A
4x8A
4x350mA
4x700mA
DIMENSIONS
ø/h (mm)
43.8x131.6x24.5
Output
4x(60-180)W
4x(96-288)W
4x(4.2-12.6)W
4x(8.4-25.2)W
Remarks
Constant voltage
Constant voltage
Constant current
Constant current
Brief introduction of buttons
Working status indicator, the sender is in dormant status when the indicator is off. The sender is under working when the indicator is flashing rapidly. If the indicator continues flashing at the frequency of 1 second, it indicates that the sender batteries low and needs to replace new batteries.
Touch wheel for selecting R/G/B colors
R G
S-
B W
W+ S+
B-
1
5
P-
2
6
B+
P+
3
7
4
8
R G B W
Short press: switch on/off each channel;
Long press: dim up/down each channel
Note: If you press R, then press G, then it is mix color of R and G. If you want to get G color directly, please press R to switch off of R first. Then press G.
S-
B-
Speed down when color is changing
Brightness down
Turn ON/OFF
S+
B+
Speed up when color is changing
Brightness up
PP+ Build-in 10 Dynamic modes,P- is previous mode,P+ is next mode.
1 2 3 4
5 6 7 8 are zone numbers,long press switch on/off each zone.Short press is to choose a zone.To synchronize several zones,short press 2 or more buttons one after another.
Wiring diagram
1)Receiver Connection Diagram for Single Unit
Power Supply
12-36VDC
110V-230VAC
Learning Key
SR-1009FA
LED CONTROLLER
2) Receiver Connection Diagram for Multiple Units
Power Supply
12-36VDC
110V-230VAC
Learning Key
SR-1009FA
LED CONTROLLER
Learning Key
SR-1009FA
LED CONTROLLER
Learning Key
SR-1009FA
LED CONTROLLER
131.6
Operation
1. Do wiring according to connection diagram and install battery into remote control.
2. How to learn&delete ID process?
a. Turn on the remote by .
b. Short press at Learning Key on receiver.
c. Press any zone button(which you desire to control) on remote,
d.Then touch color wheel.
1
e.Connected LED light will blink to confirm zone designation.
How to reset to factory default: Long Press Learning Key on receiver for over 5 seconds until connected LED light flash off,
to delete the learned ID, the receiver will be reset to factory default. If you want to learn receiver into another zone, please follow
learning ID process operation 2.
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits before switching on.
6) Please ensure that the cable is secured tightly in the connector
7) For update information please consult your supplier.
Warranty Agreement
1) We provide lifelong technical assistance with this product:
5-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
advertisement
Key Features
- Control up to 8 zones of LED lighting
- Create a variety of color effects
- Independent zone control
- Works with WIFI-RF convertor
- Controlled by smart phone
- Touch wheel for selecting R/G/B colors
- Speed up and down for color changing
- Brightness up and down
- Build-in 10 Dynamic modes
Frequently Answers and Questions
How to learn and delete ID process?
How to reset to factory default?
What is the warranty on the product?
Related manuals
advertisement
