Gourmia GSJ-300 Whole Fruit Slow Juicer User manual

WHOLE FRUIT
SLOW
JUICER
FOR CUSTOMER SERVICE
QUESTIONS OR COMMENTS
PLEASE CALL
888.552.0033
GOURMIA.COM
WHOLE FRUIT
MASTRACTION
SLO
JUICER
Safety Precautions a
Product Specs 5
Using Your Device 6
Cleaning and Care 9
Warranty Details 10
UMGSJ300-A
SAFETY PRECAUTIONS:
* Disclaimer: Manual instructions should always be read and implemented
prior to product use. Manufacturer / importer advisory boards are not respon-
sible for inadequate use due to instruction manual negligence or failure to follow
direction.
» Never plug/ unplug the device with wet hands.
» Never forcibly plug the cord into the outlet.
» Refrain from placing the plug near heat or flammables and check for
smooth wire placement, without bending during use.
» Never disassemble the base. Please consult with a repair technician for
troubleshooting advice.
» Refrain from use in the event that the electrical cord is damaged or loose.
» Never place any unknown substance into the machine.
» Never operate with the use of an empty bowl.
» Keep the base dry at all times.
» Keep this device away from children or other unqualified persons.
» While operating the device, refrain from disassembling parts or
placing/ removing unknown objects within its interior.
» Do not operate if the hopper appears loose.
» Operate on a flat and steady surface.
» In the event of a screw jam, operate in reverse for 2-3 seconds before
operating again
» Never use any source other than the pusher provided.
» Continuous use exceeding 10 minutes will overheat the motor.
» Never immerse the motor within water.
» After use, remove the plug from the outlet. Do not use cord to remove plug
» While using, if there is any unusual odor source, immediately stop use and
contact the nearest retail center for assistance.
» In the event of gas exposure, refrain from operating or plugging
in the device. Open all windows for air ventilation.
PRODUCT SPECS
Hopper
Top Set
Strainer
Pulp Spout
Juice Spout
NOTICE
| |
Da Mot operate with an emoty
bowl For more than a few seconds.
Extended use with an empty bowl
may damage the unit
IMPORTANT
As shown at right, the hopper
edge must point to “close” sign
on the basa, in order for the
machine to operate properly.
Pusher
а!
smoothie moker Cleaning Brush
(not included)
a,
Containers (2)
Top View
Reverse the step carefully
when disassembling.
USING YOUR DEVICE
Assembling your device: |
1. Affix the bowl to its base.
1) Make sure the bowl is attached until the
shaft of the base.
2) Twist bowl clockwise to close.
? Strainer
2. Assemble the strainer+spinning brush into
the bowl, making sure that both red dots
are properly aligned.
Squeezing
Screw
3. Place the squeezing screw in the center
of the bowl. You may need to turn the
screw a little bit so as to align the gears
and make sure the screw body is in position
4
4. Assemble the hopper onto the bowl. Hopper - а
on the
hopper 4 и
1) Make sure the red dot on the hopper
and the red dot on the bowl are aligned. og
2) Twist the hopper clockwise until the po
arrow on the hopper lip is pointing to |
the close sign on the base. Hara
a” 08
Top View
6 Reverse the step carefully
when disassembling.
Using your device:
1. Place one of the containers under the pulp spout and one of the containers
under the juice spout. Empty both containers as needed. Plug the juicer into
a wall outlet.
2. The machine has three settings.
On” powers the motor to start the juicing process.
Rev” reverse mode should be used to dislodge food contents.
“Off” turn to the off position to power off the unit.
3. Thoroughly rinse all parts and foods before placing them into the machine.
Food should be introuduced to the device via use of the pusher.
4. Unplug the machine after each use.
Manufacturer's tips:
Food entry into the device:
For maximum juice extraction performance, be sure to cut fruits and
vegetables into manageable sized pieces so they fit comfortably into the
feeding chute.
Unlike other juicers which shred the food for juice extraction, the Gourmia
slow juicer doesn't require push by force for food entry into the device.
Apply gentle use. of the pusher when foods block the passageway.
Product Features:
Utilizes a squeezing mechanism, as opposed to traditional grinding
processes.
« Operates with the capability of extracting soy milk, vegetable juice, and
freshly squeezed fruit juice.
« Consists of maximized low speed technology which maintains the juice's
pure form in color, taste, and nutrient value.
Food consistency guide:
When using multiple ingredients, we advise alternating between hard
and soft foods. Refer to the list below for accurate consistency ratios
during use.
Soft Hard
Cucumber Wheat Grass Carrots
Leafy Greens Pineapple Apples
Parsley Beets
Mint RT Celery
ia ,
Watermelon nme hole he | Ginger
aaa Tr /
the pusher hole
“а
Fibrous vegetables:
When juicing celery, beets or ginger with other ingredients, it is recom-
mended to do so toward the end of the juicing process. On rare occasions,
if you juice a very fibrous vegetable like celery or kale, the fibers may wrap
around the screw and jam the juicer during use. Proceed to unplug the
device and clean the designated area before resuming operation.
Pits and seeds:
You can juice whole fruits and vegetables that contain seeds such as
apples, oranges, tomatoes, cucumbers, etc. However, the Gourmia slow
juicer can’t process large pits found in stone fruits such as peaches,
plums, cherries, apricots, etc. Remove pits before placing your food into
the chute.
Skins and rind:
You can juice most fruits and vegetables with their skin or rind on.
However, some of the harder skins and rinds are bitter and may alter the
juice’s overall taste.
Leafy greens:
For best results, remove stems from leafy greens such as collards, kale
and chard before juicing. This will allow your juicer to process the greens
much more easily and result in a less bitter juice.
After use cleaning:
Once juicing is complete, pour 1-2 glasses of water down the chute into the
running juicer. This can help facilitate an easier cleaning process.
CLEANING AND CARE
Cleaning your device:
1. Turn the machine “OFF”.
2. Twist the hopper counterclockwise to unlock by grabbing the two exit
spouts. Make sure the two red dots are aligned and remove the hopper.
3. Reverse the assembly sequence.
4. Twist the bowl counterciockwise by using the 2 exit spouts to remove
the bowl.
5. Use the brush to clean parts thoroughly after operating.
« Do not use abrasive cleaners or scouring pads, as they will damage
the machine.
« Not intended for dishwasher use.
6. Do not rinse the base with running water. Instead, use a moist towel
to clean.
7. Dry the attachments after cleaning.
WARRANTY DETAILS
0000000000000000000 ..
This product is guaranteed under the premise of a 1 year limited warranty
period, applicable to the original purchaser and not transferable to a third
party user.
Repair or replacement of defective parts are at the seller's discretion. In
the event that repair isn't possible, the seller will replace the product/
part. If product repair/ replacement won't suffice, the seller has the option
of refunding the cash value of the product or component returned.
Product defects not covered under the warranty provisions include
normal wear and damage incurred from use or accidental negligence,
misuse of instruction specifications, or repair by unauthorized parties. The
manufacturing company is not liable for any incidental or consequential
damages incurred by such circumstances.