TEAC LEH55K7UDT User manual

Ultra HD Smart LED TV
LEH55K7UDT
LEH65K7UDT
USER MANUAL
IMPORTANT !
WARRANTY INFORMATION INSIDE. PLEASE READ
Trademark of TEAC Corporation JAPAN
www.teac.com.au
WARRANTY PROCEDURE
v1.6: May 2015
Please read WKHRZQHU¶VPDQXDO carefully and ensure that you have followed the correct installation and operating procedures.
1.
2.
3.
Please read this warranty card.
Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.
If you require Warranty Service, please contact the TEAC Warranty Service Hotline at 1300 553 315 for assistance. Please ensure
that you have the model number, serial number and purchase receipt ready when you call.
Please complete the section below and keep this information for your own records.
2ZQHU¶V1DPH
2ZQHU¶VAddress
Postcode
Model Name/No.
Serial No.
'HDOHU¶V1DPH
'HDOHU¶VAddress
Postcode
Thank you for selecting a TEAC product.
If your TEAC product malfunctions, please call us directly for warranty support
between Monday to Friday at 8.30AM ± 5PM AEST at the
TEAC Warranty Service Hotline
1300 553 315
For other enquiries, please contact us at:
www.teac.com.au
When calling to receive warranty service, please have:
1. Your model and serial number
2. Proof of purchase
3. And your product in front of you
NOTE:
- You are required to provide a copy of your proof of purchase in order to have your claim
processed.
- Please read the Terms and Conditions for details of your warranty entitlement.
M A
I I
v1.6: May 2015
ur oods come with uarantees that cannot be excluded under the Australian onsumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or dama e. You
are also entitled to ha e the oods repaired or replaced if the oods fail to be of acceptable quality and the failure does not
amount to a major failure.
1.
TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill.
Maintenance and cleaning (i.e. laser head) is not covered by this warranty. The TEAC warranty only applies to TEAC products purchased
NEW from a TEAC Authorised Retailer in Australia. This warranty only applies to the original purchaser and cannot be transferred.
2.
The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the cons umer under a law in relation to
goods or services to which the warranty relates, being the Australian Consumer Law.
3.
Refund or replacement via your TEAC Authorised Retailer is available for a period of 14 days after purchase for goods that have been
inspected and determined to have a major failure. Refund and exchange is not applicable for change of mind.
4.
Subject to the terms herein, this warranty effectively covers TEAC products, excluding products purchased for commercial purposes, as
specified in the Warranty Periods Table below from the date of purchase. Commercial use products are covered for 12 months only
(Authorised Service Centre).
A P
excludin commercial use products
LED/LCD TV
All other TEAC products
5.
IZ ( V)
´DQGDERYH
19´WR´
N/A
A A YP I
from date of purchase
12 months
12 months
12 months
A
A
Y
VI
YP
In-home service*
Authorised Service Centre Service
Authorised Service Centre Service
In Home Service/Pick up* Service
This service will only be provided as part of this warranty if all the following conditions are met;
a) The product is indicated in the Warranty Period Table.
b) The product is within the warranty period.
c) The product is located within the normal service area of the local TEAC Authorised Service Centre.
If TEAC determines that the product is not repairable on site, TEAC can complete the repair by taking the product to a TEAC A uthorised
Service Centre.
Authorised Service Centre Service
The purchaser is required to send the product at their own expense to the nearest TEAC Authorised Service Centre for repair. In this event,
proof of purchase is required to support a warranty claim. After the repair, the product will be available for collection by or return to the
purchaser at a fee upon request. TEAC in-home service can be made available at a fee upon request.
6.
A 12-month replacement warranty is applicable to all Accessories such as Remotes, Power Adapters and Cables.
7.
TEAC will ensure to the best of its abilities that all required parts are made available for any required service/repair.
8.
TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product repairs within a reasonable
period based on available resources and workload during the time when service is requested and performed.
9.
Refurbished parts may be used to repair the product. In the case of a replacement, the product may be replaced, with a refurbished unit of the
same type or, if one is unavailable, a similar refurbished model with equal or better features and specifications.
10.
Please be advised that if the product presented for repair is capable of retaining user-generated data, the data may be lost during servicing.
Customers are strongly encouraged to back up all important information/data before sending the product in for service/repair.
11.
Service will be provided only during normal business hours and under safety conditions and circumstances. TEAC and its author ised service
agents can refuse any repair if safety, in relation to OH&S, becomes DFRQFHUQWRLWVVWDIIRUDXWKRULVHGVHUYLFHDJHQWV¶SHUVRQQHO
12.
a)
b)
c)
The warranty is void and warranty claims may be refused, subject to the Australian Consumer Law, if:
The product was not transported, installed, operated or maintained according to manufacturer instruction, or
The product was abused, damaged, tampered, altered or repaired by any unauthorised persons, or
Product failure is due to accidents during use, installation or transit, power surges, use of defective or incompatible external devices, exposure
to abnormal conditions such as excessive temperatures or humidity, or entry of liquids, objects or creatures into the product, cockroach
infestations, or
d) The customer is unable to provide proof of purchase of the product for verification, or
e) The serial number of the product is missing or has been tampered with.
13.
Where any repairs or services required that are outside of the terms and conditions of this Warranty are requested by the cus tomer, or where
a fault is determined to be outside of the terms and conditions of the Warranty during an In-Home Service call, the customer shall be charged
for the cost of the repair and/or the In-Home service call fee.
14.
No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the sale of any equipment
other than as stated in this warranty and outlined above.
15.
TEAC and/or its Authorised Service Centres reserve the right to inspect and verify whether the product is exhibiting a major failure as claimed
by customers/retailers.
16.
LCD dead pixel policy, please contact TEAC at [email protected] for assistance.
Contents
Introduction...............................................................................2
Warning.....................................................................................3
Caution.......................................................................................4
Stand Assembly.........................................................................6
Wall Mounting Installation Guidelines...................................7
Main Unit Description..............................................................8
Remote Control........................................................................10
Main Menu...............................................................................11
Main Menu Operation............................................................12
Media........................................................................................33
Specifications...........................................................................35
Trouble Shooting.....................................................................36
1
Introduction
Thank you very much for your purchase of our LED TV. Read this manual carefully and keep
it handy for ready reference.
INSTALLATION
ķ Locate the TV in a room where direct light does not strike the screen. Total darkness or a
reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
ĸ Allow enough space between the receiver and the wall to permit ventilation.
Ĺ Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
ĺ This TV can be connected to 100-240V~ 50/60HZ.
Ļ Do not install the TV in a location near heat sources such as radiator, air ducts, direct sunlight,
or in a place somewhere like close compartment and close area. Do not cover the ventilation
openings when using the TV.
ļ The indicator light goes out about 30 seconds after you disconnect the TV from the power supply.
Until the indicator light goes out, you will not be able to power it back on.
Note: The Smart TV Portal runs on your internet connection. Performance is dependent on your
internet speed and connectivity.
2
Warning
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER- SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to avoid the risk
of electric shock, do not disassemble this equipment by anyone
except a qualified service personnel.
This symbol is intended to alert the user to the presence
of important operating and maintenance instructions in
the literature accompanying the equipment.
Class I structures of equipment should be connected to the grid
power output with a protective earth connection on the socket.
Power plug as a broken applianceˈbroken installations should be
easy to operate.
3
Caution
Caution
-
High voltages are used in the operation of this product.
Do not open the product's casing. Refer servicing
to qualified service personnel .
Caution
To prevent fire or electrical shock hazard, do not expose
the main unit to rain or moistureˈdo not place objects
filled with liquids, such as vases, on the apparatus.
Caution
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Caution
Avoid exposing the main unit to direct sunlight and other
sources of heat. Do not stand the television receiver
directly on other products which give off heat. E. g. video
cassette players, Audio amplifiers. Do not block the
ventilation holes in the back cover. Ventilation is essential
to prevent failure of electrical component. Do not squash
power supply cord under the main unit or other heavy objects.
4
Caution
Caution
Never stand on, lean on, push suddenly the product
or its stand. You should Pay special attention to
children.
Caution
Do not place the main unit on an unstable cart stand,
shelf or table. Serious injury to an individual, and
damage to the television, may result if it should fall.
Caution
When the product is not used for an extended period
of time, it is advisable to disconnect the AC power
cord from the AC outlet.
Caution
The LED panel used in this product is made of glass.
Therefore, it can break when the product is dropped
or applied with impact. Be careful not to be injured
by broken glass pieces in case the LED panel breaks.
5
Stand Assembly
1. IMPORTANT: Place a soft cloth on a table and place the TV face down on the cloth. This is to
prevent the panel from being cracked or damaged. Attach the stand base plate to the stand pole
by firmly tightening the supplied 4pcs M4x10 screws.
2. Attach the stand base set to the bottom of the TV by firmly tightening the supplied 4pcs M4x14
screws.
3. The TV stand is now assembled.
6
Wall Mounting Installation Guidelines
Compatible wall-mount size: VESA 600 x 400mm
Screw size for wall mounting: M6 ( The depth of the wall-mount hole is 19mm, please choose a
screw of the appropriate length)
Use the four screws to fix the TV onto a wall mounting bracket ( not included) via the four VESA
standard holes on the back of the television.
M6
M6
M6
M6
Note:
1. Wall Mount is not included with the TV; it needs to be purchased separately.
2. Use only VESA-compatible wall mounts according to the specifications recommended for this
model. Use of other wall mounts, or inappropriate installation may cause personal injuries or
damage to the TV.
3. Follow all instructions from the user manual of your chosen wall mount.
7
Main Unit Description
Control Panel Button Function
VOL+ : Volume up.
VOL- : Volume down.
CH+: TV channel up.
CH- : TV channel down.
MENU : Press to select the main menu.
SOURCE : Select the input signal.
POWER : Turn the TV on or off.
TV Terminal Connections
1
6
2
7
3
8
4
9
5
10
11
12
1. RJ45 input terminal.
2. HDMI 1 input terminal.
3. HDMI 2 input terminal.
4. YPb Pr input terminal.
5. RF antenna.
6. Coaxial output terminal.
7. HEADPHONE output terminal.
8. HDMI 3 input terminal.
9. Video out terminal.
10. Audio input terminal
11. HDMI 4 input terminal.
12. USB input terminal.
NOTE:
HDMI1/HDMI2 compatible with HDMI1.4(support 4K*2K@30Hz); HDMI3
compatible with HDMI1.4(not support 4K*2k); HDMI4 compatible with
HDMI2.0(support 4K*2K@60Hz); ARC function of HDMI2 is optional.
8
Optional Configuration as below:
Connect the USB to the USB jack on the set.
NOTE
Ɣ,WLVRQO\P$0$;RI'&FXUUHQWRXWSXWZKHQ\RXFRQQHFWZLWK86%MDFN
Ɣ 7R HQVXUHWKH0RELOH+' ZRUNVZHOO \RX VKRXOG XVHRWKHU SRZHU VXSSO\ IRU WKH0RELOH+'
Ɣ,WVXSSRUWV0RELOH+'E\FRQQHFting with USB jack (must more than 2 GB). The partitions of
WKH0RELOH+'FDQ¶WEHPRUHWKDQSDUWLWLRQV7KHPD[SDUWLWLRQLV7%,WVXSSRUWV)$7)$7
document. The max FAT document is 4GB and the max FAT32 document is 2TB.
9
Remote control
INPUT
AUDIO
PMODE
SMODE
INFO
OK
RETURN
D.SETUP
D.MENU
A-B
D.TITLE
ASPECT
GOTO
: Press this button to Turn the TV on or off.
: Press this button to mute or restore sound.
INPUT: Press to change signal source.
AUDIO: Press to select the DTV audio.
(Used for models with DTV function only)
PMODE: Select picture mode.
SMODE: Select sound mode.
0-9: Select and switch to a channel using 0 - 9.
FAV: Switch between customer set " Favorite List"
: Switch back and front between the current and
previous channels.
: Stop playing the Media.
: Press to start playing the MEDIA, or to pause playing.
(Used for models with MEDIA function only)
: Start to record. (The U disk will be formatted when
in burning , please do not store important files in the U disk)
RED, GREEN, YELLOW, BLUE: Correspond to the
different colored subjects.
EPG: Enter electronic program guide.
(Used for models with DTV function only)
INFO: Press to display the channel information. In teletext
mode,press to reveal the hidden information.
OK: Enter the selected option or execute the selected
operation. NOTE press this button to display “channel list”
in TV source.
RETURN: Press to return to previous layer.
EXIT: Exit the OSD (On-screen display).
92/Ÿ92/ź Adjust the volume.
&+Ÿ&+źChange the channel up and down.
MENU: Press this button to enter the main menu for various
optional adjustable setting.
SUBTITLE: Open or close subtitle.
: Press to play backward (Used for models with MEDIA function only)
: Press to play forward. (Used for models with MEDIA function only)
: Skip to previous chapter. (Used for models with MEDIA function only)
: Skip to next chapter. (Used for models with MEDIA function only)
GOTO: Jump to the appointed chapter.
ASPECT: Press to adjust picture ratio.
SLEEP: Set the sleep timer.
, D.SETUP, D.MENU, D.TITLE, A-B is Invalid.
10
Main Menu
Select Input Source
Press INPUT button to display the input source list.
Press͌͊or OK button to select input source, then press OK button to enter.
Press EXIT button to quit.
Options:
DTV, Analogue TV, Composite/AV , Component/YPbPr, HDMI 1, HDMI 2,HDMI 3,HDMI 4
First Time Installation
Connect an RF cable from the TVs input called “RF-In” and to your TV Aerial socket.
Language
Select the language to be used for menus and message.
Country
Select the time zone you want.
Tuning Mode
Select the tuning mode.(Option:DTV+ATV, Analogue TV,DTV)
Environment
Select the mode to be used in the environment.
(Options: Home Mode, Store Mode)
Auto Tuning
Start Auto Tuning.
Time Zone
Select the time zone mode coptions: VIC, QLD, TAS, WA ,SA,
NT, NSW/ACT.
11
Main Menu Operation
Main Menu
Press MENU button to display the main menu.
PresVŻŹEutton to select the item you want to adjust in the main menu.
(Options: PICTURE, SOUND, CHANNEL, LOCK, TIME, NETWORK, SETTING, APPLICATION.)
Picture Menu
Press MENU button to display the main menu.
Press ŻŹ button to select PICTURE in the main menu.
12
Picture Mode
Press͌͊button to select Picture Mode, then press OK button to enter sub-menu.
(Options: Standard, Dynamic, Mild, Personal, Economy)
For your convenience to watch the actual effect, a small bar will be displayed as below.
Press͌͊ button to select option, then press ŻŹ button to adjust.
Adjust the highlight intensity of the picture, but the shadow of the picture is invariable.
Adjust the optical fiber output of the entire picture, it will effect the dark region of the picture.
Adjust the saturation of the color based on your preference.
Adjust the peaking in the detail of the picture.
TIPS: Yo u c a n p re s s PMODE b u tto n to c h a n g e th e P ic tu re M o d e d ire c tly .
Backlight
Press͌͊button to select Backlight.
Color Temperature
Adjust the color intensity of the picture.
Press͌͊button to select Color Temperature , then press OK button to enter sub-menu.
Press ŻŹ button to select.
(Options:Standard,Warm,Cold)
You can change the value of red, green and blue when the color temperature in User mode.
Aspect Ratio
Press ͩƷ button to select Aspect Ratio,then press Enter button to enter sub-menu.
Press ͩƷ button to select the available display format.
( Options:Auto, 4:3, 16:9, zoom1, zoom2)
Noise Reduction
To filter out and reduce the image noise and improve picture quality.
Press͌͊button to select Noise Reduction , then press ŻŹ to set Noise Reduction on or off.
Mocom
Press͌͊button to select Mocom, then press ŻŹ to set Mocom Off, Low, Middle, High.
13
Sound Menu
Press MENU buttontodisplaythemainmenu.
PressŻŹbuttontoselectSOUND inthemainmenu.
Sound Mode
Select a sound mode to achieve ideal sound.
Press ͌͊ button to select Sound Mode,then press Enter button to enter sub-menu.
Press ͌͊ button to select.
(Options: Standard, Music, Movie, Sport, Personal)
Standard
Music
Movie
Sports
Personal
Produces a balanced sound in all environments.
Preserves the original sound.Good for musical programs.
Enhances treble and bass for a rich sound experience.
Enhances vocals for sports.
Select to customize picture settings.
TIPS YoucanpressSMODE buttonontheremotecontroltochangetheSoundModedirectly.
Auto Volume Level
Adjust volume automatically when switching to another program.
Press ͌͊ button to select Auto Volume,then press OK button to set Auto Volume on or off.
Surround Sound
Press ͌͊ button to select Surround Sound,then press ŻŹ to set Surround Sound on or off.
Digital Output
Press ͌͊ button to select digital output, then press ŻŹ to select.
( Options: PCM, Auto)
Audio Description
Press ͌͊ button to select Audio Description,then press ŻŹ to set Audio Description on or off.
AD Volume
3UHVVźŸEXWWRQWRVHOHFW$'9ROXPHWKHQSUHVVŻŹEXWWRQWRDGMXVW
Speaker Delay
3UHVVźŸEXWWRQWRVHOHFW6SHDNHU'HOD\WKHQSUHVVŻŹEXWWRQWRDGMXVW
SPDIF Delay
3UHVVźŸEXWWRQWRVHOHFW63',)'HOD\WKHQSUHVVŻŹEXWWRQWRDGMXVW
14
There are two different channel menu in this part: Channel menu under Analogue TV input source, and
channel menu under DTV input source. Next, we will introduce them one by one.
Channel Menu(Analogue TV)
Press MENU button to display the main menu. Press input to select the input source as <Analogue TV>.
PresVŻŹEutton to select CHANNEL in the main menu.
(Options: Auto Tuning, Analogue Manual Tuning, Digital Manual
Tuning, Channel Edit, Details refer to the following content.)
1. Press ̷ ̵ button to select the option that you want to adjust in the CHANNEL menu.
2. Press Enter button to adjust.
3. After finishing your adjustment, Press Enter button to save and return to the previous menu.
*Note: The channel menu is available only for Air and Cable source.
Auto Tuning
Tuning the analogue channel automatically.
Press ̷̵ button to select Auto Tuning, then press Enter button to enter sub-menu.
Tuning Mode
Select the tuning mode.
Country
Select the country.
Auto Tuning
Start auto tuning.
(Options: ATV, DTV, ATV+DTV)
15
TV
DTV
The searched TV programme
The searched DTV programme
Radio
The searched Radio programme
Data
The searched Data
Analogue Manual Tuning
Tuning the analogue channel manually.
Press ̷ / ̵ button to select Analogue Manual Tuning, then press Enter button to enter sub- menu.
Storage To 1
Store the searched channel to 1(you can
adjust the channel number by ŻŹ )
System BG
Current CH 1
Search
Fine-Tune
The color system
Select the current channel
Search the channel
Adjust the tune channel
Digital Manual Tuning
Tuning the digital channel manually.
Press ̷ / ̵ button to select Digital Manual Tuning, then press Enter button to enter sub-menu.
VHF CH 5
Set the Very High Frequency Channel
DTV
The searched DTV channel
Radio
The searched Radio Channel
Data
The searched Data Channel
16
Channel Edit
Edit the programme.
Press ̷ / ̵ button to select Channel Edit.
Press
button to enter sub-menu.
Press ̷ / ̵Gto highlight the channel you want to select.
Delete the channel from your favorite list
Rename the channel (Only available for ATV)
Move the selected channel
Skip the selected channel
Set the selected channel as favorite
Press up and down to select channel
Select the selected channel
Return to the main menu
17
Press MENU button to display the main menu. Press input to select the input source as <DTV>.
Channel Menu(DTV)
Press
button to display the main menu. Press input to select the input source as <DTV>.
PresVŻŹEutton to select CHANNEL in the main menu.
(Options: Auto Tuning, Analogue Manual Tuning, Digital Manual Tuning, Channel Edit, Signal
Information , Recorded List, Schedule List , OAD. Details refer to the following content.)
1. Press ̷ ̵ button to select the option that you want to adjust in the CHANNEL menu.
2. Press Enter button to adjust.
18
Auto Tuning
Tuning the channel automatically.
Press ̷ / ̵ button to select Auto Tuning, then press Enter button to enter sub-menu.
PresVŻŹEutton to select the Country, then press Enter button to start Auto Tuning.
Tuning Mode
Select the tuning mode.
Country
Select the country
Operator
Select the operator
Auto Tuning
Start auto tuning
(Options: ATV, DTV, ATV+DTV)
Analogue Manual Tuning
Tuning the analogue channel manually.
Press ̷ / ̵ button to select Analogue Manual Tuning,
button to enter sub-menu.
then press
Storage To 1 Store the searched channel to 1(you can
adjust the channel number by ŻŹ )
System BG
Current CH 1
Search
Fine-Tune
19
The color system
Select the current channel
Search the channel
Adjust the tuned channel
Digital Manual Tuning
Tuning the digital channel manually.
Press ̷ / ̵ button to select Digital Manual Tuning,
button to enter sub-menu.
then press
Frequency 394 MHZ
Channel frequency
Symbol Auto
Adjust the symbol automatically
Modulation Auto
Adjust the modulation automatically
Search
Start searching
Strength
Channel signal strength
Quality
Channel signal quality
Data
The searched data
Radio
The searched radio
DTV
The searched DTV programme
Press Red button, then you can adjust the modulation by yourself
Press Green button, then you can adjust the symbol by yourself
Return to the main menu
Signal Information
View the signal information of code stream.
Press ̷ / ̵ button to select Signal Information press the Enter button to view the detailed
i nformation about the signal. Only available when there is signal in DTV.
20
Recorded List
Press ̷ / ̵ button to select Recorded List, then press Enter button to enter sub-menu.
Press ̷ / ̵Gto view the recorded list.
Delete the program in Record list.
Sort the recorded programs by channel number.
Press Index button to change the LCN, channel, program order.
Schedule List
Press ̷ / ̵ button to select Schedule List, press the Enter button to view the detailed information.
Edit the selected channel
Sort the channel by time/
Channel name
Delete the selected channel
OAD
Set over-air-download on or off.
Press ź / Ÿ button to select OAD, press the Enter button to set it on or off.
21
Lock Menu
Press MENU button to display the main menu.
PresVŻŹEutton to select Lock in the main menu.
1. Press ̷ ̵ button to select the option that you want to adjust in the Lock menu.
2. Press Ente button to adjust.
3. After finishing your adjustment, Press Enter button to save and return to the previous menu.
Lock System
Set Lock System on or off.
P ress͌͊ button to select Lock System, then press ŻŹ to set it on or off.
(The default password is 0000, The almighty password is 8899)
Set Password
Press͌͊ button to select Set Password.
then press Enter button to enter sub-menu to set new password.
If you forget your password, call Customer Service for assistance.
Channel Lock
Press͌͊ button to select Channel Lock, then press Enter button to enter sub-menu.
Press ͌͊to select channel to lock or unlock it.
22
Lock the selected channel
Parental Guidance
Some programmes may not be suitable for children, through Parental Guidance set-up ,parents can
block unsuitable shows automatically.
Press͌͊ button to select Parental Guidance.
Press͌͊ button to select block M, MA, AV, R, G, PG, and above, block ALL, NO block.
Key Lock
Press͌͊ button to select Key Lock , then press Enter button or ŻŹto set it On or Off.
23
Time Menu
Press MENU button to display the main menu.
Press Ż / Ź button to select Time in the main menu.
1. Press ̷ / ̵ button to select the option that you want to adjust
in the Time menu.
2. Press Enter button to adjust.
Clock
Press͌͊ button to select Clock.
then press Enter button to enter sub-menu to set the time.
Off Time
Press͌͊ button to select Off Time, then press Enter button to enter sub-menu.
Press ͌͊to set the off Time.
On Time
Press͌͊ button to select On Time, then press Enter button to enter sub-menu.
Press ͌͊to set the on Time.
Sleep Timer
Press͌͊ button to select Sleep Timer, the TV set will sleep automatically after the setting time.
Options: off, 10min, 20min, 30min, 60min, 90min, 120min, 180min, 240min.)
OSD Time
Press͌͊ button to seleFW26'7LPHWKHQSUHVVŻŹEXWWRQWRDGMXVW
Auto Standby
Press͌͊button to select Auto Standby, then press Enter button to enter sub-menu.
Press͌͊button to select.
Tips: If the remote control does not perform any operation in the specified time, it will shut down
automatically. If any operation is performed, it will reset the time.(Option: Off, 3H, 4H, 5H)
Time Zone
Select your time zone.
Press͌͊button to select Time Zone,then press Enter button to enter sub-menu.
Press͌͊ŻŹ button to select time zone.
24
Network Menu
Press MENU button　to display the main menu.
PresVŻŹEutton to select Network in the main　menu.
1. Press ̷ ̵ button to select the option that you want to adjust in the Network menu.
2. Press Enter button to adjust.
3. After finishing your adjustment, Press Enter button to save and return to the previous menu.
Network Configuration
Select wifi or cable network.
Press͌͊ŻŹbutton to select Network Configuration, then press Enter button to confirm.
WIFI Configuration
Press͌͊to select WIFI Configuration.
Press Enter button to confirm.
Press͌͊to select WIFI Auto Search..
25
Network Info
Press ͩ / Ʒ button to select Network Info.
Press Enter button to view the WIFI network information.
Network Test
Press ͩ / Ʒ button to select Network Test.
Press Enter button to test the WIFI network.
26
Cable Configuration
Press ͩ / Ʒ button to select Cable Configuration.
Press Enter button to view set IP, Netmas k,Gateway, and DNS.
IP Config
Press ͩ / Ʒ button to select IP Config.
Press Enter button to set the IP Configuration.
27
Network Info
Press ͩ / Ʒ button to select Network Info.
Press Enter button to view the WIFI network information.
Network Test
Press ͩ / Ʒ button to select Network Test.
Press Enter button to test the WIFI network.
28
Setting Menu
Press MENU button to display the main menu, press ŻŹ to select Setting in the main menu.
Language
Press ͩƷ button to select Language. Press ŻŹ to select the display language.
Audio Language
Press ͩƷ button to select Audio Language. Press ŻŹ to select the Audio language.
Audio Language2
Press ͩƷ button to select Audio Language2. Press ŻŹ to select the Audio language2.
Subtitle Language
Press ͩƷ button to select Subtitle Language. Press ŻŹ to select the Subtitle language.
Subtitle Language2
Press ͩƷ button to select Subtitle Language2. Press ŻŹ to select the Subtitle languag e2.
Hearing Impaired
Press ͩƷ button to select Hearing Impaired. Press ŻŹ to select it on or off.
Blue Screen
Press ͩƷ button to select Blue Screen. Press ŻŹ to select it on or off.
PVR File System
Recording the selected program.
Press͌͊ button to select PVR, then press Enter button to confirm.
29
Software Update(USB)
Update the software of the TV system.
Press͌͊ button to select Software Update, then press Enter button to confirm.
Tips:A USB device with updated software is needed. Contact Customer Service for assistance.
Reset TV
Reset the settings of the TV set.
Press͌͊ button to select Reset TV , then press Enter button to confirm.
HDMI_CE
HDMI CEC control allows you to control multiple
CEC-enabled devices connected using HDMI,
with a single remote control.
S et HDMI_CEC on or off.
Press͌͊ button to select HDMI_CEC.
Press Enter button to confirm.
Audio Return Channel (ARC) returns audio though the
same HDMI channel that is used to send video to the TV.
If switched on, you won't need a separate audio cable to
return sound from the TV.
ARC feature is available for HDMI2 port.
System information
Set the System information.
Press͌͊ button to select System information , then press Enter button to set.
Set WallPaper
Set the wallpaper.
Press͌͊ button to select set wallpaper, then press Enter button to set.
30
PVR
Use PVR function to record programs. USB memory device is required for recording.
In DTV mode, press the button, the record frame OSD will pop up and start recording. After 10 seconds,
the record frame OSD is hidden and the record icon appears on the left top. Press the
button, the record
frame OSD appears. Press the
buttons to Stop recording.
Electronic Program Guide (EPG)
Electronic Program Guide (EPG) provides program information which will be broadcasted now or in the future.
The system will display EPG window by pressing “EPG” button. DATE and TIME information is displayed on
the right of the window. The left side shows all channels. The right side shows the programs in the channel.
The selected program is also displayed on the top of the screen.
Press the “RED” button to enter record mode;
Press “GREEN” button to display previous page;
Press “YELLOW” button to display next page;
Press "BLUE" button to set reminders for the
programs you want to watch later.
Timeshift
Record and replay the digital program.
Press Timeshift to pause the program, and press the same button to continue the program.
Note:USB device is need for this function.
USB Supported playback format: MKV,MP4,MPEG4,JPEG,PNG,BMP,MP3,WMA,MPG,TS,VOB,RM.
31
Application
Press MENU button to display the main menu.
Press ͩ / Ʒ button to select Application.
Applications
Press ͩ / Ʒ button to select Applications.
Press ͩ / Ʒ button to select the application you want to view, then press enter to enter..
32
Media
Multimedia
Press Menu button on the remote FRQtURO to enter the main menu. SHOHFt 0XOtimedia E\ using ŻŹ
buttons and press Enter button to enter.
PresVŻŹEutton to seOeFt the optioQ\oXZant to adjust in the main Media menu.
3UHVVŻŹEXWWRQWRVHOHFWGULYHGLVN\RXZDQWWRYLHZ, then press Enter button to enter.
Press
button to return to the previous menu and exit menu to quit.
Movie
PresVŻŹEutton to seOeFt MOVIE in the main menu, then press Enter button to enter.
When highOighting the optioQ\ou seOeFt, the fiOe informatioQZiOODppear on the right and moviHZiOOEe
SUHYLHZHG
33
Music
PresVŻŹEXWWRQWRVeOeFW0USI&LQWKHPDLQ PeQXWKeQSress EnterEXWWRQWRHQWer.
EXWWRQWRUeWXrQWRWKHSreYLRXVPeQXDQGH[LWPeQXWRTXLW.
Press
Photo
3UHVVŻŹEXWWRQWRVHOHFW3KRWRLQWKHPDLQ PHQXWKHQSUHVV
EXWWRQWRHQWHU.
EXWWRQWRUHWXUQWRWKHSUHYLRXVPHQXDQGH[LWPHQXWRTXLW
Press
File
PresVŻŹEXWWRQWRVeOeFW)LOHLQWKHPDLQ PeQXWKeQSress EnterEXWWRQWRHQWer.
WKeQKLgKOLgKWLQJWKHRSWLRQ\RXVeOeFWWKe fLOHLQfRrPDWLRQZLOODSSeDURQWKe rLgKW.
34
Specifications
HDMI INPUT
Mode
Resolution
Horizontal
Frequency
(KHz)
15.73
Vertical
Frequency
(HZ)
59.94/60
480i
720 x480i
576i
720 x 576i
15.63
50
480p
720 x480p
31.47
59.94/60
576p
720 x 576p
31.26
50
720p
1280 x 720p
37.50
44.96
50
59.94/60
1080i
1920 x 1080i
28.13
33.75
50
59.94/60
1080p
1920 x 1080p
56.25
67.5
50
59.94/60
4Kx2K
3840 x 2160
270
120
COMPONENT (YPbPr) INPUT
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(HZ)
480i
720 x480i
15.73
59.94/60
576i
720 x 576i
15.63
50
480p
720 x480p
31.47
59.94/60
576p
720 x 576p
31.26
50
720p
1280 x 720p
37.50
44.96
50
59.94/60
1080i
1920 x 1080i
28.13
33.75
50
59.94/60
1080p
1920 x 1080p
56.25
67.5
50
59.94/60
Mode
35
Troubleshooting
Before consulting service personnel, check the following chart for possible solutions.
PROBLEM
SOLUTION
TV will not turn on
ƔMake sure the power cord is plugged in.
ƔThe batteries in the remote control may be
Exhausted; replace the batteries.
ƔCheck the cable between TV and antenna/ external AV
device.
No picture, no sound
ƔPress the power button on the remote.
ƔPress the SOURCE button the remote, then press the
“Ÿ/ź”button repeatedly to select the TV source.
ƔCheck the cable between TV and antenna/ external AV
device.
Poor picture, sound OK
ƔTry another channel, the station may have broadcast
difficulties.
ƔAdjust the brightness/contrast in the Video menu. Check
that the unit is set to PAL
Audio noise
Smart TV Portal is slow
ƔMove any infrared equipment away from the TV.
ƔCheck your internet connection. Performance is dependent
on your internet speed and connectivity.
The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated technology to
produce. However, there may be a small number of bright or dark pixels on the screen. These pixels
will have no impact on the performance of the product.
36
In the event of a product failure within the warranty period, please call the
TEAC Warranty Service Hotline
1300 553 315
Between Monday to Friday - 8.30AM to 5PM AEST
*Please have your purchase receipt and the product’s serial number ready
For other enquiries and support please visit
www.teac.com.au