Syr­incs I2 Passive Installation Speaker User manual

I0, I1, I12, I2

User manual

Musikhaus Thomann

Thomann GmbH

Hans-Thomann-Straße 1

96138 Burgebrach

Germany

Telephone: +49 (0) 9546 9223-0

E-mail: [email protected]

Internet: www.thomann.de

01.02.2016

Issue 1

Table of contents

Table of contents

1 General information about this manual

2 For your safety

3 Features

4 Installation

5 Technical specifications

6 Protecting the environment

11

19

8

9

4

6

User manual I0, I1, I12, I2 (Issue 1) 3 / 20

General information about this manual

1 General information about this manual

This user manual contains important instructions for the safe operation of the unit. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the device. If you sell the unit, please make sure that the buyer also receives this manual.

Our products are subject to a process of continuous development. Thus, they are subject to change.

Signal words used

All precautions in this manual are clearly highlighted. The following signal words are used for precautions:

DANGER This warns of dangers that can result in severe injuries or death if the instructions are not followed.

WARNING This warns of dangers that can result in severe injuries or death and/or cause considerable material damage if the instructions are not followed.

CAUTION This warns of dangers that can result in reversible injuries and/or considerable material damage if the instructions are not followed.

NOTICE This warns of dangers that can result to faults during operation and/or considerable material damage. Environmental damage may also occur if the instructions are not followed.

4 / 20 User manual I0, I1, I12, I2 (Issue 1)

General information about this manual

Symbols used

General warning of a dangerous location

Warning of suspended load

Notice

User manual I0, I1, I12, I2 (Issue 1) 5 / 20

For your safety

2 For your safety

Intended use

This device is designed as a PA system. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.

This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience.

Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Safety instructions

DANGER

Danger for children

Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard!

à

Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke!

à Never let children play unattended with the electrical devices.

CAUTION

Possible hearing damage

The device can produce volume levels that may cause temporary or permanent hearing impairment. Over an extended period of time, even levels that seem to be uncritical can cause hearing damage.

à

Decrease the volume level immediately if you experience ringing in your ears or hearing impairment. If this is not possible, keep a greater distance or use sufficient ear protectors.

6 / 20 User manual I0, I1, I12, I2 (Issue 1)

For your safety

NOTICE

Operating conditions

This device has been designed for indoor use only.

à

To prevent damage, never expose the device to any liquid or moisture.

Avoid direct sunlight, heavy dirt, and strong vibrations.

User manual I0, I1, I12, I2 (Issue 1) 7 / 20

Features

3 Features

Special features of this passive 2-way full-range speaker:

– Connectivity options: Screw connections; compatible plugs for connection to the speaker cable enclosed

– Especially suitable for use with DSP amplifiers of Syrincs

– Trapezoidal housing, multiplex grey/black

– Meant for wall mounting

Optionally available accessories:

– Universal wall mount, swivel and tilt type

(Syrincs I-series wall mount black)

– Wall mount with multiple holes, compatible with Syrincs I0, horizontal swivel feature

(Syrincs I0 U-bracket, black)

– Wall mount with multiple holes, compatible with Syrincs I1, horizontal swivel feature

(Syrincs I1 U-bracket, black)

– Wall mount with multiple holes, compatible with Syrincs I12, horizontal swivel feature

(Syrincs I12 U-bracket, black)

– Wall mount with multiple holes, compatible with Syrincs I2, horizontal swivel feature

(Syrincs I2 U-bracket, black)

8 / 20 User manual I0, I1, I12, I2 (Issue 1)

Installation

4 Installation

Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.

Create all connections while the device is off. Use the shortest possible high-quality cables for all connections.

WARNING

Risk of injury caused by falling objects

à

Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain.

NOTICE

Possible property damage by magnetic fields

Loudspeakers produce a static magnetic field.

à

Therefore maintain an appropriate distance to devices that can be adversely affected or damaged by an external magnetic field.

NOTICE

Use of stands

à

When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.

User manual I0, I1, I12, I2 (Issue 1) 9 / 20

Installation

We recommend you to set up the speakers in a way, that their sound signals can reach the audience unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound will be evenly spread with maximum range throughout the audience area.

Always use high grade cables to connect your equipment. Otherwise you won't reach maximum sound quality.

For optimum results both impedance and power rating of the speaker must match the requirements of the amplifier / input signal. Consider the technical specifications of the speakers connected. The overall impedance of the connected loudspeakers shall not be less than the minimum output impedance of the amp. The amps max. RMS output power should be 50 % above the power handling capacity of the connected speakers.

If you notice distortion during operation, either the amp or the speaker is overloaded. This may permanently damage the amp or the speaker. Always reduce the volume as soon as you notice distortion.

10 / 20 User manual I0, I1, I12, I2 (Issue 1)

Technical specifications

5 Technical specifications

Syrincs I0

Configuration

Power handling

Sensitivity (1 W/1 m)

Impedance

Maximum sound pressure level

Frequency response

Dimensions (W × H × D)

Weight

1 × 5" woofer

1 × 28 mm dome tweeter

50 W (RMS)

120 W (AES)

87 dB

16

Ω

104 dB (1 m)

110 dB (peak)

70 Hz … 20 kHz (–3 dB)

173 mm × 335 mm × 165 mm

4.5 kg

335 mm

User manual I0, I1, I12, I2 (Issue 1)

173 mm 165 mm

11 / 20

Syrincs I1

Configuration

Power handling

Sensitivity (1 W/1 m)

Impedance

Maximum sound pressure level

Frequency response

Dimensions (W × H × D)

Weight

1 × 6" woofer

1 × 28 mm dome tweeter

50 W (RMS)

89 dB

16

Ω

106 dB (1 m)

112 dB (peak)

75 Hz … 20 kHz (–3 dB)

173 mm × 335 mm × 165 mm

4.5 kg

Technical specifications

12 / 20

335 mm

173 mm 165 mm

User manual I0, I1, I12, I2 (Issue 1)

Technical specifications

Syrincs I12

Configuration

Power handling

Sensitivity (1 W/1 m)

Impedance

Maximum sound pressure level

Frequency response

Dimensions (W × H × D)

Weight

2 × 6" woofer

1 × dome tweeter array (6 × 25 mm)

160 W (RMS)

92 dB

8

Ω

112 dB (1 m)

118 dB (peak)

75 Hz … 20 kHz (–3 dB)

205 mm × 645 mm × 184 mm

9.0 kg

645 mm

User manual I0, I1, I12, I2 (Issue 1)

205 mm 184 mm

13 / 20

Technical specifications

Syrincs I2

Configuration

Power handling

Sensitivity (1 W/1 m)

Impedance

Maximum sound pressure level

Frequency response

Dimensions (W × H × D)

Weight

1 × 8" woofer

1 × dome tweeter array (4 × 25 mm)

80 W (RMS)

88 dB

16

Ω

107.5 dB (1 m)

113.5 dB (peak)

55 Hz … 20 kHz (–3 dB)

241 mm × 418 mm × 211 mm

6.0 kg

14 / 20

418 mm

241 mm 211 mm

User manual I0, I1, I12, I2 (Issue 1)

Technical specifications

Frequency response, Syrincs I0

User manual I0, I1, I12, I2 (Issue 1) 15 / 20

Frequency response, Syrincs I1

Technical specifications

16 / 20 User manual I0, I1, I12, I2 (Issue 1)

Technical specifications

Frequency response, Syrincs I12

User manual I0, I1, I12, I2 (Issue 1) 17 / 20

Frequency response, Syrincs I2

Technical specifications

18 / 20 User manual I0, I1, I12, I2 (Issue 1)

Protecting the environment

6 Protecting the environment

Packaging

For the packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of.

Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

Disposal of your old device

This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste.

Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.

User manual I0, I1, I12, I2 (Issue 1) 19 / 20