Oregon Scientific BAR339DP User manual

'breGon
SCIENTIFIC
Weather Day & Night
Model: BAR339DP I BAR339DPA I
BAR339DPU I BAA339DPH
USER MANUAL
Remote RF Clock Thermo Sensor ............................8
Precautions .......................................................................8
About Oregon Scientific ...............................................9
USER MANUAL
EU-Declaration of Conformity ....................................9
FCC Statement .................................................................9
CONTENTS
Declaration of Conformity ........................................ 10
Overview ............................................................................2
Front View .......................................................................2
Back View .......................................................................3
Remote Sensor .............................................................3
Getting Started.................................................................3
Main Unit Installation ....................................................3
Remote Sensor Installation ........................................4
Clock ...................................................................................5
Clock Reception ............................................................5
Manually set Clock .......................................................6
Alarm ...................................................................................6
Weather Forecast ............................................................6
Temperature .....................................................................7
Projection ..........................................................................7
Backlight ............................................................................7
Reset ...................................................................................7
Specifications ..................................................................8
1
EN
Main Unit .........................................................................8
Weather Day & Night
Model: BAR339DP I BAR339DPA I
BAR339DPU I BAA339DPH
display; activate I deactivate auto-scan
OVERVIEW
11 . .Wnit batteries low I no battery
12. Projector: Proj ect time I outdoor temperature and
w eather forecast
FRONT VIEW
~-------- 11
~
~--- 1 2
13. rilcate indoor I outdoor sensor reception
status
14. Outdoor Temperature (Current I Max I Min)
15. Clock
16. Time Zone Offset
17. Calendar w ith w eekday I seconds
18. ALARM : View alarm status I set alarm
19. MEM: Toggle betw een current I maximum
minimum temperature display; clear records
2
13
14
15
16
17
9
10
18
- - - - - -19
1. SNOOZE: Activate snooze alarm; turn on backlight;
flip proj ected image 180°
2 . Weather forecast
3. 6.'W Outdoor remote sensor battery low
'b
4.
Radio controlled clock reception icon
5. PM: Indicates PM (12 hour mode)
6. (<•>)Indicate alarm time is displayed
7. ~Indicate daily alarm is On
8. PM: Indicates PM (12 hour mode)
9. CLOCK: Change display; set clock
10. TEMP :Togglebetween indoorloutdoortemperature
2
I
9. Battery compartment
FRONT VIEW
BACK VIEW
1---THERMO• RF C\.OCK
SENSOR
1. FOCUS Wheel : Adjust projection focus
2. ACIDCAdaptorsocket
3.
S crease I increase value of the setting;
enable I disable clock reception
4 . SEARCH : Initiate sensor search
5. OC I OF: Select temperature unit
6. LIGHT ONIOFF: Turn backlight continuously On
(adaptor installed) I only when SNOOZE key is
pressed
7. RESET: Reset unit to default settings
8. PROJECTION OFF- CLOCK - AUTO : Select
projection display
1.
2.
3.
4.
5.
6.
A:
RESET: Reset unit to default settings
EU I UK Sw itch (RTHN318D sensor only)
Channel Switch
Double sided adhesive tape
Wall mount hole
Batterycompartment
GETTING STARTED
Batteries serve as a back-up pow er supply. For
continuous use of projector and backlight, install
adapter.
3
I ·
Plug ACIDC adaptor into socket. Make sure the
adapter is not obstructed and is easily accessible
to the unit.
The sensor recept io n icon show s t he status :
ICONS
To completely disconnect from power, the adapter
should be disconnected from the main unit.
MEANING
Main unit is searching
for sensor(s)
NOT The main unit and adapter should not be
exposed to wet conditions. No objects filled with liquid,
such as vases, should be placed on the main unit and
adapter.
1
A sensor channel
has been found and
logged on
Memory backup:
1. Remove the battery compartment cover.
2 . Insert the batteries, matching the polarities.
No sensor found
OTE Batteries should not be exposed to excessive
heat such as sunshine or fire.
NOTE After every sensor initialisation, the main unit
may take up to 30 minutes to receive the time from
the sensor.
REMOTE SENSOR INSTALLATION
1.
2.
3.
4.
5.
6.
7.
Slide open the battery door.
Slide channel sw itch to channel 1.
Select EUIUK. (RTHN3 18D only)
Insert the battery, matching the polarities(+ 1-).
Press RESET after each battery change.
Close the battery door.
Press and hold SEARCH on main unit to initiate
search and start receiving time and temperature
data from the sensor.
8. Secure the sensor in the desired location using the
wall mount hole or double sided adhesive tape.
4
,..
NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures
below freezing.
~
,---
o..--
I
·~ c
CLOCK
~
CLOCK RECEPTION
..
..........
• Q
This product is designed to synchronize its clock
automatically w ith a clock signal received from
provided remote sensor.
_J
To enable I disable signal receptio n:
Press and hold
to enable or
to disable signal
reception.
A
Fo r b est results:
Place the sensor w ithin 30 m ( 100 ft) of the main
unit.
Place the sensor out of direct sunlight and
moisture.
Posit ion the sensor so that it faces the main unit,
minimizing obstructions such as doors, w alls and
furniture.
Place the sensor in a location w ith a clear view to
the sky, aw ay from metallic I electronic objects.
Posit ion the sensor close to the main unit during
cold w inter months as below -freezing temperatures
may affect battery performance and signal
transmission .
T
NOTE Reception takes 2-10 minutes. If the signal is
w eak, it can take up to 24 hours to get a valid signal.
Clock s ignal recept io n indic ator:
STRONG SIGNAL
WEAK I NO SIGNAL
NOTE Clock reception is dependent on the successful
transmission of data from remote sensor. If ~ is
displayed , press RESET on sensor and press A and
~
T on the main unit and ensure sensor ,_:_, has been
l!!!!!J
successf ully logged.
iTIP. The transmission range may vary depending
on many factors. You may need to experiment w ith
various locations to get the best results.
5
I
I
3. Press ALARM to confirm .
~ indicates alarm is on.
MANUALLY SET CLOCK
To set the clock manually, disable the clock signal
reception first.
1. Press and hold CLOCK.
2. Press .A.1 Y to change the settings.
3. Press CLOCK to confirm.
To activate I deactivate alarm:
1. Press ALARM to display alarm time.
2. Press ALARM again to turn alarm on I off.
To silence the alarm:
•
Press SNOOZE to silence it for 8 minutes
OR
•
Press any key to turn the alarm off and activate it
again after 24 hours.
The settings order is: time zone, 12124 hr format,
hour, minute, year, calendar mode (month - day I day
- month), month, day and language.
BAR339DP: Time zone offset sets the clock +I- 23
hours from the received clock signal time.
WEATHER FORECAST
NOTE If you enter+ 1 in the time offset setting, this will
give you your local time plus one hour. If you are in the
US (BAR339DPAonly) set the clock to:
0 for Pacific time
+2 for Central time
This product forecasts the next 12 to 24 hours of
weather within a 30-50 km (19-31 mile) radius with a
75% accuracy.
+1 for Mountain time
+3 for Eastern time
Main unit
Projector
-¢-
Sunny
qJ-
Partially Cloudy
To select clock display mode:
Press CLOCK to toggle between clock with seconds,
clock w ith weekday.
C)C)
Cloudy
ALARM
~<;?
Rainy
~*:
·+
Snowy
NOTE The language options are English (E), Spanish (S),
Italian (I), French (F), German (D), and Russian (R).
To set the alarm:
1. Press qpd ~d ALARM .
2. Press A I T to change the settings.
6
-
To project weather forecast and time:
 Press SNOOZE when PROJECTION switch is in
OFF mode
To toggle between indoor I outdoor temperature
display:
Press TEMP.
OR

To toggle temperature unit:
Press 0C I 0F.
Slide PROJECTION switch to CLOCK mode for
continuous display.
To auto-scan between sensors:
Press and hold TEMP.
To project weather forecast and activate toggling
display of time I outdoor temperature:
 Slide PROJECTION switch to AUTO mode.
To deactivate auto-scan function:
Press TEMP.
To deactivate projection:
 Slide PROJECTION switch to OFF mode.
To toggle between current, minimum and maximum
records for indoor I outdoor:
Press MEM repeatedly.
To focus image:
 Turn FOCUS wheel.
NOTE If projection is illuminated, do not look directly
into the projector.
To clear records:
Press and hold MEM.
BACKLIGHT
PROJECTION
To activate continuous backlight:
• Slide LIGHT - ON I OFF switch to ON.
This unit projects time, outdoor temperature information
and weather forecast for your convenience.
To deactivate continuous backlight:
• Slide LIGHT - ON I OFF switch to OFF (Press
SNOOZE to activate LED backlight for 5 seconds).
NOTE Install adapter to use projection feature.
To lip projected image by 1800:
 Press SNOOZE.
RESET
Press RESET to return to the default settings.
7
EN
TEMPERATURE
EN
SPECIFICATIONS
PRECAUTIONS
•
MAIN UNIT
TYPE
DESCRIPTION
LxWxH
142 x 42 x 158 mm
(5.59 x 1.65 x 6.22 in)
Weight
270g (9.52 oz) without battery
Power
5V AC adaptor
2 x CR2032 batteries
(for backup)
•
•
•
•
•
•
REMOTE RF CLOCK THERMO SENSOR
•
TYPE
DESCRIPTION
LxWxH
64 x 25 x 98 mm
(2.52 x 0.98 x 3.86 in)
Weight
80 g (2.8 oz) without battery
Temperature range
-20°C to 60°C (-4°F to 140°F)
Resolution
0.1°C (0.2°F)
•
Signal frequency
433 MHz
•
Transmission range
30 m (98 ft) unobstructed
No. of channels
5
Power
1 x UM-3 (AA) 1.5 V batteries
•
•
8
Do not subject the unit to excessive force, shock,
dust, temperature or humidity.
Do not cover the ventilation holes with any items
such as newspapers, curtains etc.
Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
Do not clean the unit with abrasive or corrosive
materials.
Do not tamper with the unit's internal components.
This invalidates the warranty.
Only use fresh batteries. Do not mix new and old
batteries.
Images shown in this manual may differ from the
actual display.
When disposing of this product, ensure it is
collected separately for special treatment and not
as normal household waste.
Placement of this product on certain types of
wood may result in damage to its finish for which
Oregon Scientific will not be responsible. Consult
the furniture manufacturer's care instructions for
information.
The contents of this manual may not be reproduced
without the permission of the manufacturer.
Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for
special treatment is necessary.
Please note that some units are equipped with a
battery safety strip. Remove the strip from the
battery compartment before first use.
! CE
NOTE The technical specifications for this product and
the contents of the user manual are subject to change
without notice.
Ro HS
COMP LI ANT
COUNTRIES RTTEAPPROVALCOMPLIED
A ll EU countries, Sw itzerland@
and Norway®
NOTE Features and accessories w ill not be available
in all countries. For more information, please contact
your local retailer.
FCC STATEMENT
ABOUT OREGON SCIENTIFIC
This device complies with Part 15 of the FCC Rules.
Operation is subject to the follow ing tw o conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received ,
including interference that may cause undesired
operation.
V isit our w ebsite (www.oregonscientific.com) to learn
more about Oregon Scientific products. If you're in
the US and w ould like to contact our Customer Care
department directly, please visit:
www2 .oregonscientific.comlservicelsupport.asp
For
international
inquines,
please
visit:
www2 .oregonscientific.comlaboutlinternational .asp
WARNING Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
EU-DECLARATION OF CONFORMITY
NOTE This equipment has been tested and found
to comply w ith the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation .
Hereby, Oregon Scientific, declares that this Weather
Day & Night (Model: BAR339DP I BAR339DPA I
BAR339DPU I BAA339DPH ) is in compliance with the
essential requirements and other relevant provisions
of Directive 1999151EC . A copy of the signed and dated
Declaration of Conformity is available on request via
our Oregon Scientific Customer Service.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance w ith the instructions, may cause harmful
interference to radio communications. How ever, there
is no guarantee that interference w ill not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
9
I
EN
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment
and receiver.
 Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
 Consult the dealer or an experienced radio I TV
technician for help.
Manufacturer:
Address:
IDT Technology Limited
Block C, 9IF, Kaiser Estate,
Phase 1, 41 Man Yue St.,
Hung Hom, Kowloon,
Hong Kong
is in conformity with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received,
including interference that may cause undesired
operation.
DECLARATION OF CONFORMITY
The following information is not to be used as contact
for support or sales. Please visit our website at www2.
oregonscientific.comIservice for all enquiries.
We
Name:
Address:
Telephone No.:
Oregon Scientific, Inc.
19861 SW 95th Ave.,Tualatin,
Oregon 97062 USA
1-800-853-8883
declare that the product
Product No.:
BAR339DP I BAR339DPA I
BAR339DPU I BAA339DPH
Product Name:
Weather Day & Night
10