Hisense HR6TFF350S User manual

HR6TFF350

HR6TFF350S

HR6TFF272

HR6TFF272S

HR6TFF230

HR6TFF230S

2

Contents

Brief introduction……………………….2

Important safety instructions…………3

Installing your new appliance………...4

Description of the appliance………….8

Control panel……………………...9

Using your appliance…………………10

Helpful hints and tips……………… 11

Cleaning and care……………………12

Troubleshooting………………………13

Disposal of the appliance……………15

Brief introduction

Thank you for your choosing our products. We are sure you will find your new appliance a pleasure to use.

Before you use the appliance, we recommend that you read through these instructions carefully, which provides details about its usage and functions. this appliance are familiar with its operations and safety features. It is important that you install the appliance correctly and pay attention to the safety instructions carefully.

user's manual with the appliance for future reference and retain it to any future users.

in household and similar applications such as:

-Staff kitchen- areas in shops, offices and other working environments;

-Farmhouses by clients in hotels, motels and other residential types of environment;

- B e d a n d b r e a k f a s t t y p e o f environments;

-Catering and similar non-retail applications.

by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

such as aerosol cans with a flammable propellant in this appliance.

WARNING—Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

WARNING—Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

WARNING—Do not damage the refrigerant circuit.

WARNING—Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

WARNING—When disposing of the appliance do so only at an authorized waste disposal centre. Do not expose to flame.

WARNING—If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Hisense Refrigerator

3

Important safety instructions

●

General safety and daily use

It is important to use your appliance safely. We recommend that you follow the guidelines below.

Store any food in accordance with the s t o r a g e i n s t r u c t i o n s f r o m t h e manufacturer.

Safety about electricity

To avoid the risks that are

always present when using an electric appliance, we recommend that you pay more attention to the instructions about electricity below.

yourself. It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause short circuit, fire or electric shock.

through the appliance. Should any damage be evident, don't plug in the appliance but contact the shop immediately from which you purchased it. Keep all packing materials in this case.

against the air outlet on the rear wall of both the refrigerator and freezer compartment, as it affects sufficient air circulation.

hours before connecting the appliance to allow the refrigerant to flow back into the compressor.

components of this appliance.

once it has been thawed out.

Don't store bottled or canned drinks

(especially carbonated drinks) in the freezer compartment. Bottles and cans may explode.

single phase alternating current of

220~240V/50Hz. If the voltage fluctuates exceeding the upper limit,

A.C. automatic voltage regulator of more than 350W should be applied to the refrigerator for safety use.

when the appliance is installed. cubes straight from the freezer as this can cause freezer burn to the mouth and lips.

Safety for children and infirm persons children to avoid risk of suffocation.

by touching the very hot compressor at the rear bottom of appliance.

appliance as this could cause injury should they fall off.

Never allow children to play with the appliance by hanging or standing over or on the doors, racks, shelves and drawers etc.

-This appliance is fitted with a plug in accordance with local standard. The plug should be suitable for use in all houses fitted with sockets in a c c o r d a n c e w i t h c u r r e n t specifications.

-If the fitted plug is not suitable for your socket outlets, it should be cut off and carefully disposed of. To avoid a possible shock hazard, do not insert the discarded plug into a socket. If in doubt contact a qualified, registered electrician.

multiple sockets which could cause overloading of wiring circuits and could cause a fire.

Always plug your appliance into its own individual electrical socket which has a voltage rating that matched the rating plate.

Hisense Refrigerator

4 squashed or damaged. Otherwise, it may cause short circuit, electric shock or overheat and even cause a fire.

socket is loose, there is a risk of electric shock or fire.

disconnect it from the mains power before you clean or move it.

Refrigerant

The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a h i g h l e v e l o f e n v i r o n m e n t a l compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit becomes damaged.

The refrigerant (R600a) is flammable.

on the electrical cord. Always grip the plug firmly and pull straight out from the socket to prevent damaging the power cord.

Caution: risk of fire the light cover of interior lighting.

replaced or repaired by a qualified electrician or authorized service engineer. Only genuine spares should be used.

flammable propellants(e.g. spray cans ) or explosive substances in the appliance.

Should the refrigerant circuit be damaged:

Avoid opening flames(candles, lamps etc.) and sources of ignition.

as ice cream makers inside the food s t o r a g e c o m p a r t m e n t s o f t h e appliance, unless they are approved by the manufacturer.

which the appliance is situated.

Service Note

Hydrocarbon Refrigerant type

R600a.

located in the refrigerator compartment with optical instruments to avoid eye injuries. If it is not functioning correctly, c o n s u l t a q u a l i f i e d , r e g i s t e r e d electrician or replace it in accordance with the “cleaning and care” chapter.

than an Authorized Service Person to service this applian. In

Queensland the authorized Service

Person MUST hold a Gas Work

Authorization for hydrocarbon refrigerants to carry out servicing or repairs which involve removal of covers.

Installing your new appliance

Before using the appliance for the first time, you should be informed of the following tips.

Ventilation of appliance

In order to improve efficiency

of the cooling system and save energy, it is necessary to maintain good ventilation around the appliance for the dissipation of heat. For this reason, sufficient clear space should be available around the refrigerator.

Suggest :It is advisable for there to be at least 75mm of space from the back to the wall, at least 100mm from its top,at last 100mm from its side to the wall and a clear space in front to allow the doors to open 135°. As shown in following diagrams.

100 100

75

100

960(B)

Note:

This appliance performs well within the climate class from N to T showed in the table below.

Hisense Refrigerator

5

Model A

HR6TFF350(S) 1301

HR6TFF272(S) 1172

HR6TFF230(S) 1172

B

960

938

938

C

740

670

670

It may not work properly if being left at a temperature above or below the indicated range for a long period.

Climate class

SN

N

ST

T

Ambient temperature

+10°C to +32°C

+16°C to +32°C

+16°C to +38°C

+16°C to +43°C avoid high moisture. sunlight rain or frost. Stand the appliance away from heat sources such as stoves, fires or heaters.

Leveling of appliance

circulating in the lower rear section of the appliance, the bottom feet may need to be adjusted. You can adjust them manually by hand or by using a suitable spanner.

the top backwards by about 10mm.

≤10mm

Warning! When reversing the door, the appliance must not be connected to the mains. Ensure that the plug is removed from the mains socket.

Tools you will need

8mm socket wrench Cross-shaped screwdriver

Thin-blade screwdriver Monkey wrench 8mm wrench

Note: Before you start lay the refrigerator on its back in order to gain access to the base, you should rest it on soft foam packaging or similar material to avoid damaging the backboard of the refrigerator. To reverse the door, the following steps are generally recommended.

1. Stand the refrigerator upright.

Open the upper door to take out all door racks (to avoid rack sdamaged) and then close the door.

Door racks

Reversing the door

The side at which the door opens can be changed, from the right side (as supplied) to the left side, if the installation site requires.

2. Stand the refrigerator upright, first remove the screw cover ① and loose the screw ②and unscrew the upper hinge cover ③ which is at the top right corner of the refrigerator, and use a putty knife or thin-blade screwdriver to prize the screw hole cover ④ which is at the top left corner of the refrigerator.

Hisense Refrigerator

6

①Screw cover

②screw

③Upper hinge cover (right)

④

Screw hole cover

3. Unscrew the flange screws ① which are used for fixing the right upper hinge part ②. Lift the upper door and place it on a padded surface to prevent it from scratching.

6. Place the lower door on a smooth surface with its panel upwards.Loose screws②，detach part①. Then install part① to corresponding position on left side together with screws②.

①flange screws

②right upper hinge part

①

②

① Stop block ② Self-tapping screws

Note: Please hold the upper door by hand during step 3 to prevent door dropping.

4.

Remove the upper door and place it on a smooth surface with its panel upwards. Loose screws② , detach part① , then install part① to the left side with screws②.

1

2

① Door holder

② self-tapping screws

7. Change screw hole covers on middle cover plate from left to right (as shown in figure below).

①

②

1

5. Loose screws used to fix the middle hinge and remove middle hinge. Then remove the lower door.

8. Place refrigerator flatwise, remove part③ and then loose screws④ .

Remove part ② and part①.

Hisense Refrigerator

7 washer

12. Screw out The upper hinge axis, turn the upper hinge over and fix axis on it. Then place it at side for use.

① Lower hinge part（right）

② Front foot fixed board

③ Adjustable bottom feet part

④ Self-tapping screws

Note: washer may stick to lower door.

9. Screw out lower hinge, change it to the near hole site, and then screw up and mount washer.

10. Just remount to the step 8,change part①to left and part②to right and then fix them with screws④ . Finally install part③.

Lower hinge part (left)

13. Just remount to the step 2,change upper hinge cover③to left and fix them with screws② and then install the screw cover①. Finally, change screw hole cover④to right .

①

②

③

④

①Screw cover

②screw

③Upper hinge cover (left)

④Screw hole cover

11. Move the lower door and adjust its position to align lower hole site and upper hinge axis. Turn the middle hinge by 180, change the washer on the axis to the upper side, adjust the middle hinge to the appropriate position and then install it.

14. Open the upper door, mount door racks and then close it.

Note: washer may stick to lower door.

Washer

Hisense Refrigerator

8

Description of the appliance

1. Wind channel cover in freezer

2. Freezer temperature regulator

3. Freezer shelf

4. Twist ice maker

5. Ice storage box

6. LED light

7. Fresh zone cover

8. Fresh zone drawer

9. Wind channel cover in refrigerator

10. Temperature controller

(in refrigerator chamber)

11. Refrigerator shelf

12. Humidity control sliding block

13. Crisper cover

14. Moisture fresh crisper

15. Adjustable feet

16. Freezer door

17. U pper Door switch

18. Rack on upper door

19. Freezer door seal

20. Fridge door seal

21. Upper rack

22.Egg tray (inside)

23. Small rack

24. Lower Door switch

25. Middle rack

26. Lower rack

27. Fridge door

View 1 of the appliance

Optional part list

Model

Part

LED light

Twist ice maker

Fresh zone cover

Fresh zone drawer

Humidity control sliding

block

Small rack

Handle

HR6TFF350(S)

L

L

L

L

L

L

X

HR6TFF272(S)

L

L

L

L

L

L

X

HR6TFF230(S)

L

L

L

L

L

X

X

Note: Due to unceasing modification of our products, your refrigerator may be slightly different from this instruction manual, but its functions and using methods remain the same.

Hisense Refrigerator

the middle position

10

Using your appliance

Your appliance has the accessories as the "Description of the appliance”showed in general, with this part instruction you can have the right way to use them.

Door rack

Crisper Cover

canned liquid, bottled drinks and packed food, etc. Do not place too many heavy things in the racks.

placed at different heights according to your requirements. Please take food out of the shelf before lifting vertically to reposition. the crisper and the avoiding the vegetable losing moisture.

Moisture fresh crisper

Note: There are egg trays in the upper shelf and bottle holder in the lower shelf.

Shelf in Refrigerator chamber

chamber, and they can be taken out to be cleaned.

vegetable.

Crisper and Humidity control

The crisper, mounted on telescopic extension slides, is for storing vegetables and fruits. You can adjust the humidity inside by using the sliding block.

The sliding block on crisper cover can slide to left or right and the air hole become more or less relatively. More air hole opening means less humidity and less means more humidity.

We recommend that you store vegetables with more humidity and fruits less humidity.

Humidity control sliding block

Crisper Cover

Crisper

Fresh zone drawer

2~3

℃ lower than other regions in the refrigerator chamber.

other erodible food.

When you remove the crisper, pull them forward, then lift the crisper off the slides. Remember to empty food in the crisper firstly. Once you have removed the drawers, ensure the slides are pushed back fully.

Hisense Refrigerator

1 1

Twistable ice tray

Note: If the ice tray is used for the first time or has not been used for a long time, please clean it before using.

deposit ice cubes. You should use it as follows.

1. Pull out the twistable ice tray from the installation bracket.

2. Pour water into the ice trays and the water level shall not exceed the maximum line.

3. Place the filled ice tray back to the bracket.

4. When ice cubes form, twist the knobs clockwise and the ice will drop into the ice box below.

5. Ice cubes can be stored in the ice box, if you need them, you can pull out the ice box and take them out.

Helpful hints and tips

Energy saving tips

We recommend that you follow the tips below to save energy.

for long periods in order to conserve energy.

any sources of heat (Direct sunlight, electric oven or cooker etc) necessary.

liquid in the appliance.

ventilated, humidity free, room. Please refer to Installing your new appliance chapter.

combination for the drawers, crisper and shelves, do not adjust the combination as this is designed to be the most energy efficient configuration.

Hints for fresh food refrigeration

refrigerator or freezer, the internal temperature will increase resulting in the compressor having to work harder and will consume more energy.

particularly if it has a strong flavor.

circulate freely around it.

Hints for refrigeration

food: wrap and place on the glass shelf above the vegetable drawer. Always follow food storage times and use by dates suggested by manufacturers.

They should be covered and may be placed on any shelf.

They should be stored in the special drawer provided.

Should be wrapped in airtight foil or plastic film wrap.

Hisense Refrigerator

12 film wrap.

cause frost burns to the skin.

Should have a lid and be stored in the door racks.

Hints for freezing

each frozen package in order to keep track of the storage time.

Hints for the storage of frozen food

out of use, let the appliance run at least 2 hours on the higher settings b e f o r e p u t t i n g f o o d i n t h e compartment.

enable it to be rapidly and completely frozen and to make it possible to subsequently thaw only the quantity required.

polyethylene food wraps which are airtight, touch the food which is already frozen to avoid temperature rise of the latter.

immediately after removal from the freezer compartment, will probably stored correctly by the food retailer.

rapidly and should not be re-frozen. Do not exceed the storage period indicated by the food manufacturer.

Switching off your appliance

If the appliance needs to be switched off for an extended period, the following steps should be taken prevent mould on the appliance.

1. Remove all food.

2. Remove the power plug from the mains socket.

3. Clean and dry the interior thoroughly.

4. Ensure that all the doors are wedged open slightly to allow air to circulate.

Cleaning and care

For hygienic reasons the appliance

(including exterior and interior accessories) should be cleaned regularly at least every two months.

Caution! The appliance must not be connected to the mains during cleaning. Danger of electrical shock!

Before cleaning switch the appliance off and remove the plug from the mains socket.

Exterior cleaning

To maintain good appearance of your appliance, you should clean it regularly.

-Wipe the control panel with a clean, soft cloth.

-Spray water onto the cleaning cloth instead of spraying directly on the surface of the appliance. This helps ensure an even distribution of moisture to the surface.

-Clean the doors, handles and cabinet surfaces with a mild detergent and then wiped dry with a soft cloth.

Caution!

-Don't use sharp objects as they are likely to scratch the surface.

-Don't use Thinner, Car detergent,

Clorox, ethereal oil, abrasive cleansers or organic solvent such as Benzene for cleaning. They may damage the surface of the appliance and may cause fire.

Interior cleaning

You should clean the appliance interior regularly. It will be easier to clean when food stocks are low. Wipe the inside of the fridge freezer with a weak solution of bicarbonate of soda, and then rinse with warm water using a wrung-out sponge or cloth. Wipe completely dry before replacing the shelves and baskets.

Hisense Refrigerator

1 3

Thoroughly dry all surfaces and removable parts.

Although this appliance automatically defrosts, a layer of frost may occur on the freezer compartment's interior walls if the freezer door is opened frequently or kept open too long. If the frost is too thick, choose a time when the supply of food stocks are low and proceed as follows:

1 . R e m o v e e x i s t i n g f o o d a n d accessories baskets, unplug the appliance from the mains power and leave the doors open. Ventilate the room thoroughly to accelerate the thawing process.

2. When defrosting is completed, clean your freezer as described above.

Caution! Don't use sharp objects to remove frost from the freezer compartment. Only after the interior is completely dry should the appliance be switched back on and plugged back into the mains socket.

Door seals cleaning

Take care to keep door seals clean.

Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door. Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning.

Caution! Only after the door seals are completely dry should the appliance be powered on.

Replacing the LED light:

Warning: The LED light must not be replaced by the user! If the LED light is damaged, contact the customer helpline for assistance. To replace the

LED light, the below steps can be followed:

1. Unplug your appliance.

2. Remove light cover by pushing up and out.

3. Hold the LED cover with one hand and pull it with the other hand while pressing the connector latch.

4. Replace LED light and snap it correctly in place.

Troubleshooting

If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below. You can carry out some easy checks according to this section before calling for service.

Warning! Don't try to repair the appliance yourself. If the problem persists after you have made the checks mentioned below, contact a qualified electrician, authorized service engineer or the shop where you purchased the product.

Hisense Refrigerator

Hisense Refrigerator

14

15

Hisense Refrigerator