PD9H-25

COMPACT OUTDOOR DMX HEX-LED PAR48 CAN

Item ref: 154.321UK

User Manual

Thank you for choosing this outdoor PAR Can. Weatherproof LED lighting PAR48 can in an aluminium housing with adjustable stand bracket. Full colour mixing can be accessed through stand-alone control or via DMX512 input. Built-in 6-in-1 HEX LEDs are capable of displaying red, green, blue, white, amber and UV. These LEDs allow for richer and warmer colour blending. A versatile fixture for adding dynamic colour to indoor or outdoor areas.

Please read through this manual thoroughly before use, any damage cause by misuse of product will not be covered by warranty. installation, please refer unit to licensed electrician in event of product failure.

Please do not open cover, no user serviceable or repairable parts within. Opened unit WILL void the IP65 rate and makes the unit unsuitable for outdoor

Installation:

This PAR can is powered by mains, therefore installation should be carried out certified electrician only. Before installation, always ensure the mains is switched OFF at the consumer unit and the fuse block should be removed on the circuitry that you are working on to ensure the mains will not be accidentally switched back on while working.

er or professional when unit malfunction.

IP65 rating applies to the unit only. For the wiring connection, we recommend to use waterproof junction box and gland or waterproof resin jointing kit for full IP65 protection. Below table shows wire colour and connection, please ensure all connections are made correctly.

Wire colour reference:

Colour

Brown

Blue

Yellow/Green

Red

White

Carry

Mains – live

Mains – neutral

Mains – earth

DMX – dmx+ signal

DMX – dmx- signal

Product layout:

154.321UK User Manual







Auto mode

Sound activation

Microphone sensitivity

Manual control menu:

Press the “menu” button to enter setting menu.

Press “up” and “down” to navigate through various setting options.

Press “enter” to enter desire setting.

Choose set value by “up” and “down” buttons and confirm setting by pressing “enter”.

Display Mode Press ENTER for setting







DMX address

Channel mode

Slave mode

 to 

Select DMX control through 2, 3, 4, 5, 6, 9 channels

 = master,  = slave 

Option of fade (colour scroll), jump, sound to light and 63 preset static colours.

 = sound to light on,  = sound to light off 

   (0-100% gain) 

 RGB colour mixing mode

Press up and down to set individual RBG dimmer to allow colour mixing.





LED display

LED display inverted

Fixture test sequence

 = stays on,  = turns off after 10 sec untouched 

 /  (normal or inverted display) 

Fixture steps through all functions – press MENU to exit  

 Fixture hours Displays how many hours of use for the fixture 

Auto mode:

Enter auto mode menu by press enter on  on the LCD display, 4 auto mode options are available as follows:

Fade (scroll) – press enter at  to set unit to scroll through preset static colours. Options for scroll speed

 to  , dimming  to  and strobe  to  are available to adjust.

Jump – press enter at  to set unit to jump through preset static colours. Options for jump speed  to

 , dimming  to  and strobe  to  are available to adjust.

Sound-to-light – press enter at  to set unit to chase sound.

154.321UK User Manual

Static colour – there are 63 preset colours available to choose from. Press enter at  , static colours are chosen through  to  , dimming  to  and strobe  to  are available to adjust within the same menu.

Master/slave mode:

One or more PAR Cans can be synchronized to one master unit. Simply set the main control unit to master

(  ) on  menu and the synchronizing units to slave (  ) on  menu. Connect DMX out from the master unit to DMX in of the slave unit; further slave units can be controlled by daisy chain DMX out signal from the slave unit.

DMX mode:

This PAR Can will enter DMX mode automatically when DMX signals are detected, ensure the DMX initial address is set so that it’s function can be controlled correctly. DMX initial address can be set under  menu, simply press enter to enter and up/down for address value and enter again to confirm.

This PAR Can can be controlled by 2/3/4/5/6/9 DMX channel modes, different DMX control modes can be set via the  menu.

2CH – 2 channels

Channel

Channel 1

Channel 2

3CH1 – 3 channels Op1

Value

000 - 255

000 - 255

Function

Master dimmer 0-100%

Static colour selection

Channel

Channel 1

Channel 2

Channel 3

3CH2 – 3 channels Op2

Channel

Channel 1

Channel 2

Channel 3

Value

000 - 255

000 - 255

000 - 255

Value

000 - 255

000 - 255

000 - 004

005 - 080

081 - 150

151 - 220

221 - 255

Function

Red dimmer 0-100%

Green dimmer 0-100%

Blue dimmer 0-100%

Function

Master dimmer 0-100%

Strobe

Black out

Static colour selection

Colour jump, speed increase with value

Colour scroll, speed increase with value

Sound to light chase

4CH – 4 channels

Channel

Channel 1

Channel 2

Channel 3

Channel 4

5CH – 5 channels

Channel

Channel 1

Channel 2

Channel 3

Channel 4

Channel 5

6CH – 6 channels

Channel

Value

000 - 255

000 - 255

000 - 255

000 - 255

Value

000 - 255

000 - 255

000 - 255

000 - 255

000 - 255

Value

Function

Red dimmer 0-100%

Green dimmer 0-100%

Blue dimmer 0-100%

White dimmer 0-100%

Function

Red dimmer 0-100%

Green dimmer 0-100%

Blue dimmer 0-100%

White dimmer 0-100%

Amber dimmer 0-100%

Function

Channel 1

Channel 2

Channel 3

Channel 4

Channel 5

Channel 6

000 - 255

000 - 255

000 - 255

000 - 255

000 - 255

000 - 255

Red dimmer 0-100%

Green dimmer 0-100%

Blue dimmer 0-100%

White dimmer 0-100%

Amber dimmer 0-100%

UV dimmer 0-100%

154.321UK User Manual

9CH – 9 channels

Channel

Channel 1

Channel 2

Channel 3

Channel 4

Channel 5

Channel 6

Channel 7

Channel 8

Channel 9

Value

000 - 255

000 - 255

000 - 255

000 - 255

000 - 255

000 - 255

000 - 255

000 - 255

000 - 004

005 - 080

081 - 150

151 - 220

221 - 255

Function

Master dimmer 0-100%

Strobe, speed 0-100%

Red dimmer 0-100%

Green dimmer 0-100%

Blue dimmer 0-100%

White dimmer 0-100%

Amber dimmer 0-100%

UV dimmer 0-100%

N/A

Static colour selection

Colour jump, speed increase with value

Colour scroll, speed increase with value

Sound to light chase

Specifications:

Power

Fuse

Total luminous flux

Luminous efficacy

Power consumption

LED qty

LED power

100-240Vac, 50/60Hz

F3A

3982lm

23.5lm/W

169W

9

18W

6-in-1 HEX (red, green, blue, UV, amber & white)

25º

Aluminium

DMX channels

LED lifespan

Operating temp

Luminance : red

Luminance : green

Luminance : blue

Luminance : white

2, 3, 4, 5, 6, 9

50,000 hours

-20°C to +45°C

1300Lux @1m

2100Lux @1m

2200Lux @1m

3200Lux @1m

LED colour

Beam angle

Housing material

Luminance : amber

Luminance : UV

Luminance : full on

1100Lux @1m

1000Lux @1m

8300Lux @1m

Projection distance 10m IP rating IP65

Housing colour Black Dimensions 235 x 265 x 210mm

DMX connection

No strobe output

Red: DMX+, White: DMX-, Braid: ground Weight

Troubleshooting:

No power

(mains)

No LED display

No light output

Check mains wiring is correctly to mains in connection

Check mains outlet and consumer unit is switched on

Press any control panel button and check LED setting in menu

Check control panel mode settings ensure dimming is not set to minimum

Check DMX settings from controller (dimmer levels, blackout etc.)

Check strobe settings on control panel or from DMX controller

Unresponsive to DMX

Overheating/ cutting out

4.3kg

Check DMX connection/joints to ensure dmx + and – not shorted and ground is continuous to eliminate interference

Check that DMX mode is enabled (set “Addr” on control panel)

Check dmx lead and connector is in good workable condition

Ensure that the unit is not too close to a heat source

Ensure that adequate airflow is afforded for cooling

Ensure alien object and dirt is not built up between heat sink fins

This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.

Copyright© 2014. AVSL Group Ltd .

154.321UK User Manual