Snom D765, 760 IP phone User Manual

Snom D765, 760 IP phone User Manual
Add to My manuals

Below you will find brief information for IP phone D765, IP phone 760. The IP phones D765 and 760 are feature-rich devices that offer a wide range of capabilities for businesses of all sizes. They can be used for making and receiving calls, transferring calls, putting calls on hold, and creating conferences. Both models have a large color display and a user-friendly interface. The D765 also has Bluetooth connectivity for wireless headsets. These phones are designed to enhance productivity and communication within any organization.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

IP phone D765, IP phone 760 User Manual | Manualzz

snom technology AG

Wittestr. 30 G

13509 Berlin, Deutschland

Tel. +49 30 39 83 3 0

Fax +49 30 39 83 31 11 snom technology, Inc.

136 Harvey Road, Suite A102

Londonderry, NH 03053, USA

Tel. +1 339 227 6160

Fax +1 339 227 6180 snom UK Ltd

Amethyst House, Meadowcroft Way

Leigh Business Park, Leigh

Manchester WN7 3XZ, UK

Tel. +44 161 348 7500

Fax +44 169 348 7509 snom France SARL

6 Parc des fontenelles

78870 Bailly, France

Tel. +33 1 80 87 62 87

Fax +33 1 80 87 62 88 snom technology SRL

Via A. Lusardi 10

20122 Milano, Italia

Tel. +39 02 00611212

Fax +39 02 93661864 snom technology Ltd.

Rm. 828, 5F, No. 285, Sec. 4

Zhongxiao E. Rd., Da‘an Dist.

Taipei City 10692, Taiwan

Tel. +886 2 8751 1120

Fax +886 2 8751 1130

Your specialist retailer - Ihr Fachhändler -

Votre distributeur - Su distribuidor - Il tuo rivenditore:

User Manual

IP Phone D765 | snom 760

© 2015 snom technology AG v1.05

TABLE OF CONTENTS

Copyright, Trademarks, GPL, Legal Disclaimers ......................................................7

Important information ......................................................................................................8

Safety instructions ......................................................................................................................8

SELV (Safety Extra Low Voltage) compliance ...............................................................8

Standards conformance ...........................................................................................................9

Product specifications ...............................................................................................................9

Disposal of the device ...............................................................................................................9

Cleaning .......................................................................................................................................9

Notational conventions ..................................................................................................10

Setting up the phone ......................................................................................................12

Delivery Content ...................................................................................................................... 12

Attaching and detaching the footstand ............................................................................... 12

Rotating the tab of the cradle ............................................................................................... 13

Connecting the phone ........................................................................................................... 14

Connecting a headset ............................................................................................................. 15

Initializing and registering the phone .................................................................................. 16

Prerequisites ....................................................................................................................... 16

Initialization .......................................................................................................................... 16

What to do if initialization and registration are unsuccessful .................................. 17

Correcting the clock ......................................................................................................... 18

Getting to know your phone ........................................................................................19

At a glance ................................................................................................................................. 19

LED indicators ......................................................................................................................... 21

Call indicator ....................................................................................................................... 21

Function key LEDs ............................................................................................................ 21

Message LED ..................................................................................................................... 21

Hard keys .................................................................................................................................. 22

Freely programmable function keys with LEDs .......................................................... 22

Context-sensitive, programmable function keys ......................................................... 22

Navigation, confirmation, and cancel keys ................................................................... 22

Preprogrammed, variably programmable function keys ............................................ 23

Audio Control Keys ........................................................................................................... 23

Alphanumeric Keypad ........................................................................................................ 24

Input modes and navigation .................................................................................. 24

Entering numerals, letters, special characters, and symbols .......................... 24

2

Display layout ........................................................................................................................... 25

Idle Mode ............................................................................................................................. 25

When the phone is active ................................................................................................ 27

Settings ..................................................................................................................................... 28

Phone settings .................................................................................................................... 28

Adjusting the Backlight .................................................................................................... 29

The phone's web interface ................................................................................................ 31

Opening the web interface ................................................................................... 32

How the web interface works .............................................................................. 33

Web settings overriding manual phone settings ............................................. 33

User mode/administrator mode ........................................................................................... 34

Directories .........................................................................................................................36

Directory .................................................................................................................................... 36

Definitions, explanations ................................................................................................... 36

Directory entries ...................................................................................................... 36

Contact Types ......................................................................................................... 37

Outgoing identity .................................................................................................... 37

Group ........................................................................................................................ 37

Ringtones ............................................................................................................................ 37

Adding/Editing Entries on the Phone ........................................................................... 38

Adding new entry manually .................................................................................. 38

Adding new entry from call list ............................................................................ 38

Adding current caller ............................................................................................. 38

Sorting entries ......................................................................................................... 38

Editing existing entry .............................................................................................. 39

Deleting an entry ..................................................................................................... 39

Adding/editing entries on the web interface ............................................................... 39

Adding new entry ................................................................................................... 39

Editing an entry ....................................................................................................... 40

Deleting entry on web interface .......................................................................... 42

Dialing from phone directory ........................................................................................... 42

Deleting whole directory .................................................................................................. 42

Importing/Exporting Directory ......................................................................................... 42

External directories .................................................................................................................. 43

LDAP .................................................................................................................................... 43

Contacts .............................................................................................................................. 43

3

Using the phone ..............................................................................................................44

Making calls .............................................................................................................................. 44

Selecting identity for current outgoing call .................................................................. 44

Using different audio devices ......................................................................................... 44

Handset .................................................................................................................... 44

Headset .................................................................................................................... 44

Speakerphone ......................................................................................................... 44

Handset or headset and casing speaker .......................................................... 44

Using different dialing methods ...................................................................................... 45

Auto dial .................................................................................................................... 45

Redialing ................................................................................................................... 45

Calling number from call history (missed, received, dialed calls) ................ 45

Calling number from phone directory ................................................................ 45

Speed dialing .......................................................................................................... 45

Calling emergency numbers ................................................................................ 45

Call completion ....................................................................................................... 46

Number guessing (auto completion) ................................................................. 47

Accepting calls ........................................................................................................................ 47

Using different audio devices ........................................................................................... 47

Automatically accepting calls .......................................................................................... 47

Call pick-up from another extension .............................................................................. 48

Call waiting .......................................................................................................................... 49

Active calls ................................................................................................................................ 50

Hold ...................................................................................................................................... 50

One call on hold ..................................................................................................... 50

Holding multiple calls ............................................................................................ 50

Conference ......................................................................................................................... 51

Initiating a conference ........................................................................................... 51

Conference screen navigation ............................................................................ 52

Speaking to one participant in private ............................................................... 52

Putting one participant on hold ........................................................................... 52

Dropping a participant ........................................................................................... 52

Adding a participant ............................................................................................... 52

Putting the conference on hold ........................................................................... 53

Terminating the conference .................................................................................. 53

Transferring calls ................................................................................................................ 53

Attended transfer .................................................................................................... 53

Blind transfer ........................................................................................................... 53

Call waiting .......................................................................................................................... 54

Terminating calls ...................................................................................................................... 54

4

Missed Calls ............................................................................................................................. 54

Call lists ..................................................................................................................................... 54

Rejecting or redirecting incoming calls .............................................................................. 54

Manually ............................................................................................................................... 54

Automatically ....................................................................................................................... 55

Rejecting anonymous calls .............................................................................................. 55

Call forwarding ......................................................................................................................... 56

Making/changing the settings on the phone and turning on call forwarding ....... 56

Turning on forwarding of all calls with a programmable function key ......... 57

Turning off call forwarding ................................................................................................ 57

Configuring the function keys .....................................................................................58

Function keys on snom phones ........................................................................................... 58

Programming the function keys ............................................................................................ 59

Example 1, Extension monitoring and call pick-up ..................................................... 60

Example 2, Monitoring calls on-screen ........................................................................ 61

Example 3, Speed dialing ................................................................................................ 62

Example 4, Turning forwarding of all calls on and off ................................................ 63

Customizing the phone settings .................................................................................64

Identities/accounts .................................................................................................................. 64

Configuring new identity/account .................................................................................. 64

Editing an existing identity/account ............................................................................... 66

Assigning ringtones ................................................................................................................ 66

Date and time formats ............................................................................................................ 67

Date ...................................................................................................................................... 67

Time ...................................................................................................................................... 67

Time zone .................................................................................................................................. 68

Emergency numbers ............................................................................................................... 68

Language settings of phone and web interface ............................................................... 69

Phone language ................................................................................................................. 69

Web interface language ................................................................................................... 69

Dial tones .................................................................................................................................. 69

Emergency numbers ............................................................................................................... 70

Call forwarding ......................................................................................................................... 70

Call completion ........................................................................................................................ 72

Call waiting ............................................................................................................................... 72

Hiding my caller ID .................................................................................................................. 73

Rejecting anonymous calls .................................................................................................... 73

Number guessing .................................................................................................................... 73

Speed dial ..................................................................................................................................74

5

Software update ..............................................................................................................75

Manual update ......................................................................................................................... 75

Auto provisioning ..................................................................................................................... 75

Troubleshooting ...............................................................................................................76

Reboot ....................................................................................................................................... 76

Hard reboot .............................................................................................................................. 76

Reset to factory values ........................................................................................................... 76

TFTP Update ............................................................................................................................ 76

Manual initialization ................................................................................................................. 76

Contacting snom Support ..................................................................................................... 77

Traces ......................................................................................................................................... 78

Appendix 1 - Display Symbols ................................................................................................ 79

Symbols found in the function key line ............................................................................... 79

Display indications .................................................................................................................. 81

Appendix 2 - Status Messages ............................................................................................... 83

Appendix 3

- Labeling Function Keys P5-P16 .................................................................... 84

Appendix 4 - Wall Mounting .................................................................................................... 85

Appendix 5

- Programmable Functions ................................................................................. 86

Programmable Functions ....................................................................................................... 86

Key Events ................................................................................................................................ 90

Appendix 6 - Bluetooth Module (D765 only) ....................................................................... 92

Pairing ........................................................................................................................................ 92

Unpairing ................................................................................................................................... 93

Disconnecting a Paired Headset ......................................................................................... 93

Reconnecting a Paired Headset .......................................................................................... 93

Using a Bluetooth Headset with the Snom Phone .......................................................... 94

Selecting Ringer Device for Incoming Calls ................................................................ 94

Turning on Headset BT Mode ......................................................................................... 94

Making Calls in Headset BT Mode ................................................................................ 95

Turning on Voice Dialing ....................................................................................... 95

Dialing ....................................................................................................................... 95

Accepting Calls in Headset Mode ..................................................................... 95

Ending Calls ............................................................................................................ 95

Adjusting Headset Volume .............................................................................................. 95

Muting the Microphone .................................................................................................... 96

Appendix 7

- GNU General Public License ......................................................................... 97

6

D765 | snom 760 User Manual

Copyright, Trademarks, GPL, Disclaimers

C

opyright, Trademarks, GPL, Legal Disclaimers

© 2015 snom technology Aktiengesellschaft

All Rights Reserved.

snom, the names of snom products, and snom logos are trademarks owned by snom technology AG.

All other product names and names of enterprises are the property of their respective owners.

Product specifications are subject to change without notice.

snom technology AG reserves the right to revise and change this document at any time, without being obliged to announce such revisions or changes beforehand or after the fact.

Texts, images, and illustrations and their arrangement in this document are subject to the protection of copyrights and other legal rights worldwide. Their use, reproduction, and transmittal to third parties without express written permission may result in legal proceedings in the criminal courts as well as civil courts.

When this document is made available on snom’s web page, snom technology AG gives its permission to download and print copies of its content for the intended purpose of using it as a manual. No parts of this document may be altered, modified or used for commercial purposes without the express written consent of snom technology AG.

Although due care has been taken in the compilation and presentation of the information in this document, the data upon which it is based may have changed in the meantime. snom therefore disclaims all warranties and liability for the accurateness, completeness, and currentness of the information published, except in the case of intention or gross negligence on the part of snom or where liability arises due to binding legal provisions.

Our firmware includes some source code that may be used and modified by anyone and everyone

under the GNU Public License (GPL) (see Appendix 6 on page 97), provided they, in turn, make it

available to everyone else with the same licensing agreement. Please go to https://www.snom.com/en/ support/download/gpl-open-source/ for the original GPL license and the source code of components licensed under GPL and used in snom products.

7

D765 | snom 760 User Manual

Safety, Disposal, Cleaning of Product

I

mportant information

Please read the instructions on safety and disposal and on how to set up and use the device before using it and also give them to other users to read or inform those users of their contents. Save this manual and do not give the device to third parties without it.

S

afety instructions

Follow the instructions in this manual and other applicable documentation of the device.

• If the phone is not supplied with power via an Ethernet cable, use only a power adapter expressly recommended by snom technology. Other power supplies may damage or destroy the phone, affect its behavior, or induce noise.

• Avoid placing the cables where people may trip over them or where they may be exposed to mechanical pressure as this may damage them.

• This device is for indoor use only! NOT FOR OUTDOOR USE!

• Do not install the device in rooms with high humidity (for example, in bathrooms, laundry rooms, damp basements). Do not immerse the device in water and do not spill or pour liquids of any kind onto or into the device.

• Do not install the device in surroundings at risk for explosions (paint shops, for example). Do not use the device if you smell gas or other potentially explosive fumes.

• Do not use the device during thunderstorms. Lightning striking the power grid may cause electric shocks.

Warning: The handset contains a magnet, and its earpiece may attract small dangerous objects such as needles or pins. Please ensure before each use that no such objects are present.

SELV (Safety Extra Low Voltage) compliance

Safety status of Input/Output connections comply with SELV requirements.

Warning: To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits

to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and

PSTN ports contain TNV circuits. Some LAN and PSTN ports both use RJ-45 (8P8C) connectors. Use caution when connecting cables.

8

D765 | snom 760 User Manual

Safety, Disposal, Cleaning of Product

S

tandards conformance

This device complies with the essential health, safety, and environmental requirements of all relevant European directives.

This phone is FCC Class B certified and meets US health, safety, and environmental standards.

The declaration of conformity can be requested from

Snom Technology AG

Wittestr. 30 G

13509 Berlin, Germany

Unauthorized opening, changing, or modifying the device will cause the warranty to lapse and may also result in the loss of CE conformity and the FCC certification. In case of malfunction contact authorized service personnel, your seller, or snom.

P

roduct specifications

Safety: IEC 60950

Certification: FCC Class B

CE Mark

Power: PoE or 5 V DC (adapter not included in delivery)

Connectors:

◦ 2 x RJ 45 (Ethernet): 1 x LAN, 1 x PC

◦ 2 x 4P4C (handset, optional headset)

◦ USB port: D765 1 x type A, USB 2.0; snom 760 2 x type A, USB 2.0

◦ 1 proprietary snom connector for EHS Advanced

Ethernet: 2 x IEEE 802.3/1 Gigabit switch

Power over Ethernet: IEEE 802.3af, Class 2

Bluetooth (D765 only): Bluetooth V4.0+EDR, Class 2

D

isposal of the device

This device is subject to European Directive 2002/96/EC and may not be disposed of with general household garbage.

If you do not know where you may dispose of the device at the end of its lifespan, contact your municipality, your local waste management provider, or your seller.

C

leaning

To clean the device, use an anti-static cloth. Please avoid cleaning liquids as they might damage the surface or internal electronics of the device.

9

D765 | snom 760 User Manual

Notational Conventions

N

otational conventions

Throughout this manual you will see the below-listed symbols and notations, indicating the action you need to take next.

• Navigation key. The arrows (up, down, left, and right ) are used to navigate in menus and lists. Depending on the context, they indicate pressing the top, bottom, left, or right edge of the navigation key or pressing the function keys underneath the display symbols or

,

, when these symbols are available. Somethimes either method will work.

, ,

Press top edge of navigation key

Press bottom edge of navigation key

Press left edge of navigation key

Press right edge of navigation key

• Symbol : To confirm actions and input. Depending on the context, they indicate pressing the confirmation key or the function key underneath the display symbol , when this symbol is available. Somethimes either method will work.

• Symbol : To cancel actions and input. Depending on the context, they indicate pressing the cancel key or the function key underneath the display symbol

Somethimes either method will work.

, when this symbol is available.

• Menu items: Represented by number and title, e.g., "5 Maintenance".

• Sequences of actions to be taken. The character ">" indicates the next step in a sequence of actions to change a setting or perform a function.

Example 1: > 1 Preferences > 4 Language > > >

> 1 Preferences

> 4 Language

>

>

>

Press the key to open the Settings menu

Next, press the number "1" key on the alphanumeric keypad. Alternatively press .

Next, press the number "4" key on the alphanumeric keypad. Alternatively, navigate to "4 Language" with the navigation key and press to open the list of available languages.

Scroll through the list by pressing either the up and down arrows on the navigation key.

Save your selection and return to the previous screen by pressing the confirmation key.

Press the cancel key briefly to return to previous screens one screen at a time; press the key for 3 seconds to return to the idle screen.

10

D765 | snom 760 User Manual

Notational Conventions

>

Press the cancel key briefly to return to previous screens one screen at a time; press the key for 3 seconds to return to the idle screen.

Example 2: Web interface > Advanced > Behavior > Phone Behavior > Number Guessing >

"On"

Web interface Open the phone‘s web interface (see on how to do it)

> Advanced

> Behavior

> Phone Behavior

> Number Guessing

> "On"

Click on the item "Advanced" in the menu on the left side of the window

Next, click on the tab labelled "Behavior". The bold lettering of the title on a tab indicates that its contents are currently visible.

Find the section titled "Phone Behavior"

Find the item "Number Guessing"

Click on the radio button

11

D765 | snom 760 User Manual

S

etting up the phone

D

elivery Content

Setting up the Phone

Quick Installation Guide

D765

VoIP phone

A

Delivery content · Lieferumfang · Contenu de la boîte · En la caja · Contenuto della confezione

GNU

General Public License

Quick Installation

Guide

D765

B Attaching the Footstand · Fuß montieren · Attacher le pied · Montaje el soporte · Fissare il supporto

1 2 3

C

Connecting · Anschließen · Connecter · Conectar ·

Collegare

D

OK Cancel

E

Navigation

(2, 3)

USB Port 2.0,

Type/Typ A

(2, 3)

(1, 2)

(1) If no PoE available - Wenn PoE nicht verfügbar - S'il n'y a pas de PoE - Si no se dispone de PoE - Se non disponibile

PoE-

(2) Not included in delivery - Nicht im Lieferumfang enthalten -

Non inclus - Non incluido - Non incluso

(3) Optional - Optionnel - Opzionale - Opcional

(2, 3) snom technology AG

Wittestr. 30 G

13509 Berlin, Deutschland [email protected]

snom technology, Inc.

136 Harvey Road, Suite A102

Londonderry, NH 03053, USA [email protected]

snom UK Ltd.

Amethyst House, Meadowcroft Way

Leigh Business Park, Leigh

Manchester WN7 3XZ, UK [email protected]

snom France SARL

6 Parc des fontenelles

78870 Bailly, France [email protected]

snom technology SRL

Via A. Lusardi 10

20122 Milano, Italia [email protected] snom technology Ltd.

Rm. A2, 3F, No. 37, Ln. 258

Ruiguang Rd., Neihu Dist.

Taipei City 114, Taiwan [email protected] 2015001

ENGLISH

Copyright, Trademarks, Legal Disclaimers

© 2015 snom technology Aktiengesellschaft. All Rights

Reserved. snom, the names of snom products, and snom logos are trademarks owned by snom technology AG.

All product specifications are subject to change without notification. snom technology AG reserves the right to revise and change this document at any time, without being obliged to announce such revisions or changes beforehand or after the fact.

Although due care has been taken in the compilation and presentation of the information in this document,

• Safety: IEC 60950

Connectors:

◦ 2 x RJ45 (Ethernet): 1 x LAN, 1 x PC

◦ 2 x 4P4C (handset, optional headset)

◦ USB port: 1 x type A, USB 2.0

◦ 1 proprietary snom connector for EHS Advanced

• Ethernet: 2 x IEEE 802.3 / 1 Gigabit Ethernet switch

• Compatible with Bluetooth V4.0+EDR, Class 2

• Power over Ethernet (PoE): IEEE 802.3af, Class 2

If PoE not available: Power adapter PSAC10R-050,

5VDC 10 watts. Not included in delivery, available separately (snom PN 00002730)

Disposal of the device

This device is subject to European Directive 2002/96/EC and may not be disposed of with general household garbage. If you do not know where to dispose the device at the end of its lifespan, contact your municipality, local waste management provithe data upon which it is based may have changed in the meantime. snom therefore disclaims all warranties and liability for the accurateness, completeness, and currentness of the information published, except in the case of intention or gross negligence on the part of snom or where liability arises due to binding legal provisions.

Important Information

/

Safety Instructions

• Follow the instructions in this manual and other applicable documentation of the device.

• If the phone is not supplied with power via the

Ethernet cable, use only a power adapter expressly der, or vendor.

Cleaning

To clean the device, use an anti-static cloth. Please avoid cleaning liquids as they might damage the surface or internal electronics of the device.

Setting up and connecting the phone: See figures

B and C

Initializing and registering the phone

recommended by snom technology. Other power supplies may damage or destroy the phone, affect its behavior, or induce noise.

• Avoid placing the cables where people may trip over them or where they may be exposed to mechanical pressure as this may damage them.

• This device is for indoor use only! NOT FOR OUT-

DOOR USE!

• Do not install the device in rooms with high humidity (for example, in bathrooms, laundry rooms, damp basements). Do not immerse the device in water and do not spill or pour liquids of any kind onto or into the device.

• Do not install the device in surroundings at risk for explosions (paint shops, for example). Do not use the device if you smell gas or other potentially explosive fumes.

• Do not use the device during thunderstorms.

Lightning striking the power grid may cause electric shocks.

Warning: The handset contains a magnet, and its

NOTE: You will need the registration information received from your Internet service provider or your network administrator - normally the phone or extension number, the password, and the registrar.

After you have set up the phone and connected it to the network, it will begin to initialize. Normally the initialization is completely automatic, using DHCP.

If your network does not support DHCP, you must obtain the IP address, netmask, IP gateway, and DNS server from your Internet service provider or your network administrator and enter them manually when you are asked to do so on the display.

Watch the display and, when prompted, select an option by pressing the up the OK key .

or down arrow on the navigation key (Fig. D). Save your selection by pressing

1. Language. The default is English.

2. IPv6. The default is IPv4. Press the OK key to continue with the default.

3. VLAN. Press if you are not using VLAN.

4. Time zone. Press the function key underneath to go to the next time zone, then to show all available options within that time zone.

5. Tone scheme (dial tone)

6. The display shows the "Welcome" screen. Press any key to log on. earpiece may attract small dangerous objects such as needles or pins. Please ensure before each use that no such objects are present.

SELV (Safety Extra Low Voltage) Compliance

Safety status of input/output connections comply with

SELV requirements.

Warning: To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and PSTN ports contain TNV circuits. Some LAN and PSTN ports both use RJ-45

(8P8C) connectors. Use caution when connecting cables.

Standards conformance

This device complies with the essential health, safety, and environmental requirements of all relevant European directives.

The declaration of conformity can be requested from snom (address see left column).

This phone is FCC Class B certified and meets US health, safety, and environmental standards.

Unauthorized opening, changing, or modifying the device will cause the warranty to lapse and may also result in the loss of CE conformity and the FCC certification. In case of malfunction contact authorized service personnel, your seller, or snom.

NOTE: To view the phone's IP address at this state, press

7. Enter the account number. Press to save.

8. Enter the registrar. Press to save.

9. Reboot the phone.

10. Enter the password received from your Internet service provider or administrator. Press to save. After successful registration you will see the idle screen (Fig. E).

For further information, please refer to the Quick

Start Guide and the manual on our web page www.snom.com.

DEUTSCH

Copyright, Markenrechte, Haftungsausschluss

© 2015 snom technology Aktiengesellschaft. Alle

Rechte reserviert.

snom sowie die Namen der snom-Produkte und die snom logos sind gesetzlich geschützte Marken der snom technology AG.

Produktspezifikationen können ohne Vorankündigung geändert werden. snom technology AG behält sich jederzeit das Recht auf Überarbeitung und Änderung dieses Dokumentes vor, ohne verpflichtet zu sein, die vorgenommenen Änderungen anzukündigen oder mitzuteilen.

Trotz der angewandten Sorgfalt bei der Zusammenstellung und Präsentation der Informationen in diesem

Dokument können sich Daten zwischenzeitlich geändert haben. Daher übernimmt snom keine Gewähr für die Richtigkeit, Vollständigkeit oder Aktualität der zur

Verfügung gestellten Informationen. Jegliche Haftung für Schäden ist ausgeschlossen, sofern diese nicht auf Vorsatz oder grober Fahrlässigkeit auf seiten von snom beruhen oder sofern keine Haftung aufgrund zwingender gesetzlicher Bestimmungen eintritt.

Wichtige Hinweise

• Sicherheit: IEC 60950

• Anschlüsse:

◦ 2 x RJ45 (Ethernet): 1 x LAN, 1 x PC

◦ 2 x 4P4C (Hörer, optionales schnurgeb. Headset)

◦ USB-Port: 1x Typ A, USB 2.0

◦ 1 proprietäre snom-Buchse für EHS Advanced

• Ethernet: 2 x IEEE 802.3 / 1 Gigabit Ethernet-Switch

• Power over Ethernet (PoE): IEEE 802.3af, Klasse 2

Kompatibel mit Bluetooth V4.0+EDR, Klasse 2

Wenn PoE nicht verfügbar: Netzteil PSAC10R-050,

5V DC 10 W. Nicht im Lieferumfang enthalten, separat erhältlich (snom Art.-Nr. 00002730).

Entsorgung des Produkts

Reinigung

Dieses Gerät unterliegt der europäischen

Richtlinie 2002/96/EG und darf nicht im

Hausmüll entsorgt werden. Wenn Sie nicht wissen, wo Sie Ihr Altgerät entsorgen können, wenden Sie sich bitte an Ihre Kommune, Ihren örtlichen Müllentsorger oder

Ihren Fachhändler.

Benutzen Sie ein antistatisches Tuch. Benutzen Sie kein Wasser und keine Reinigungsflüssigkeiten, da sie die Oberfläche und die Elektronik des Gerätes beschädigen könnten.

Aufstellen und Anschließen des Telefons

Lesen Sie bitte vor Inbetriebnahme die Sicherheitshinweise und die Bedienungsanleitung. Lassen Sie sie auch von den Mitbenutzern des Gerätes lesen oder informieren Sie sie über deren Inhalt. Bewahren Sie die-

Siehe Abb. B und C.

Initialisierung und Registrierung des Telefons

Beachten Sie bitte: Sie benötigen die von Ihrem

Netzwerkadministrator oder Ihrem VoIP-Provider ses Dokument auf und geben Sie das Telefon nur mit ihm an Dritte weiter.

Sicherheit

Befolgen Sie die Anweisungen in dieser Bedienungsanleitung und in der sonstigen Dokumentation des Geräts.

• Falls die Stromversorgung nicht über ein Ethernetkabel erfolgt, verwenden Sie nur ein von snom ausdrücklich empfohlenes Netzteil. Die Verwendung anderer Netzteile könnte das Telefon beschädigen oder gar zerstören.

erhaltenen Zugangsdaten für die Registrierung und

Nutzung Ihres Accounts (Kontos), normalerweise

Telefonnummer, Registrar und Passwort.

Sobald Sie das Telefon an das Netzwerk angeschlossen haben, beginnt es mit der Initialisierung und Registrierung. Die Initialisierung erfolgt normalerweise automatisch über DHCP.

Falls Ihr Netzwork DHCP nicht unterstützt, können Sie

• Verlegen Sie die Netz- und Stromkabel so, dass sie durch mechanischen Druck nicht beschädigt werden und Personen nicht darüber stolpern könnten. die IP-Addresse, den IP-Gateway und den DNS Server, die Sie ebenfalls von Ihrem Netzwerkadministrator oder VoIP-Provider erhalten, manuell eingeben, wenn

Sie auf dem Display dazu aufgefordert werden.

• Dieses Gerät ist nur für den Gebrauch in Innenräumen bestimmt - NICHT FÜR DEN AUSSENBEREICH!

• Stellen Sie das Gerät nicht in Räumen mit hoher

Treffen Sie bei Aufforderung auf dem Display Ihre Auswahl durch Drücken des Aufwärts- oder Abwärtspfeils

) auf der Navigationstaste (Abb. D). Speichern Sie

Ihre Auswahl durch Drücken der OK-Taste .

Luftfeuchtigkeit wie Badezimmern, Waschküchen, feuchten Kellerräumen auf. Tauchen Sie das Gerät nicht in Wasser und gießen Sie keine Flüssigkeiten auf oder in das Gerät.

• Stellen Sie das Gerät nicht in explosionsgefährdeten

Umgebungen (z.B. Lackiereien) auf. Benutzen Sie das Gerät nicht, wenn Sie Gas oder andere möglicherweise explosionsgefährliche Dämpfe riechen.

• Warnung: Der Hörer enthält einen Magneten und kann kleine gefährliche Objekte wie Nadeln anziehen.

Bevor Sie ihn ans Ohr halten, vergewissern Sie sich, dass keine Objekte daran haften.

1. Sprache. Die Voreinstellung ab Werk ist Englisch.

2. IPv6. Die Voreinstellung ist IPv4. Drücken Sie auf die OK-Taste , um mit der Voreinstellung fortzufahren.

3. VLAN. Wenn Sie VLAN nicht benutzen, drücken

Sie auf die Funktionstaste "Abbr" oder auf die

Beendentaste .

• Telefonieren Sie nicht während eines Gewitters

(Stromschlaggefahr bei Blitzeinschlag ins Netz).

4. Zeitzone

5. Rufton

6. Auf dem nächsten Bildschirm werden Sie aufgefordert, eine beliebige Taste zu drücken, um die

Registrierung des Telefons vorzunehmen.

SELV (Safety Extra Low Voltage) Einhaltung

Die Eingangs-/Ausgangsverbindungen halten die

SELV-Richtlinien für Kleinspannungsgeräte ein.

Warnung: Um elektrische Schläge zu vermeiden, verbinden Sie keine SELV-Geräte mit Geräten, die Fernsprech-Netzspannung (TNV) führen. Nur an LAN-Ports anschließen! LAN-Ports enthalten

SELV-Stromkreise, Festnetz-Anschlüsse dagegen

TNV-Stromkreise. Vorsicht beim Anschließen, da beide Steckverbindungen RJ-45 (8P8C) verwenden könnten.

Normkonformität

Dieses Gerät entspricht den grundlegenden

Gesundheits-, Sicherheits- und Umweltanforderungen aller relevanten europäischen

Richtlinien. Die Konformitätserklärung kann bei snom (Anschrift siehe zweite Spalte links) angefordert werden.

Die eigenmächtige Öffnung des Geräts sowie Änderungen und Modifizierungen am Gerät führen zum Erlöschen der Herstellergarantie und können darüberhinaus zum Erlöschen der Zulassungen führen.

Hinweis: Um jetzt die IP-Adresse des Telefons anzuzeigen, drücken Sie auf

FRANÇAIS

.

7. Geben Sie die Account-/Nebenstellennummer ein und bestätigen Sie die Eingabe mit .

8. Geben Sie den Registrar ein und bestätigen Sie die

Eingabe mit .

9. Starten Sie das Telefon neu.

10. Geben Sie das Passwort ein, das Sie von Ihrem

Internet Provider oder Ihrem Netzwerkadministrator erhalten haben, und drücken Sie auf .

Bei erfolgreicher Registrierung sehen Sie den

Ruhebildschirm (Abb. E).

Weitere Information finden Sie im Quick Start

Guide und in der Bedienungsanleitung auf unserer

Webseite, http://www.snom.com.

◦ Base phone unit

◦ Footstand

◦ Handset

◦ Handset cord

◦ Ethernet cable

◦ Quick Start Guide (snom 760) or Quick Installation Guide (D765)

A

ttaching and detaching the footstand

The footstand can be attached at two different angles: 46° and 28°.

Note:

Before attaching the footstand to the phone, plug the long end of the handset cord into the connector labelled " " on the back of the phone and place the cord in the cable guide.

1. Place the top of the grooves on the footstand below the slideguides on the back of the phone.

2. Push the footstand upwards onto the slideguides until it locks in place.

12

D765 | snom 760 User Manual

Setting up the Phone

3. Plug the short end of the handset cord into the connector on the handset.

4. Place the phone on an even, horizontal surface.

R

otating the tab of the cradle

The phone is delivered with the tab level with the inner edge of the cradle. If you are going to mount the phone on a wall, we recommend that you rotate the tab 180°. After rotation, the tip of the tab will protrude slightly above the edge of the "cradle". The small rectangular hole in the receiver casing fits perfectly over the now protruding tip, holding the receiver safely in place in the upright position on the wall.

1.

2.

3.

1. Slide the plastic tab from the cradle (Fig. 1)

2. Rotate the tab 180°.

3. Slide the tab back into the cradle (Fig. 2). The top of the tab now protrudes slightly above the inner edge of the cradle (Fig. 3), so that it will hold the handset more securely.

1

GHI

4

PQRS

7 a A

ABC

2

JKL

5

TUV

8

0

DEF

3

MNO

6

WXYZ

9

#

GHI

4

PQRS

7 a A

ABC

2

JKL

5

TUV

8

0

DEF

3

MNO

6

WXYZ

9

#

1

GHI

4

PQRS

7 a A

ABC

2

JKL

5

TUV

8

0

DEF

3

MNO

6

WXYZ

9

#

13

D765 | snom 760 User Manual

Setting up the Phone

C

onnecting the phone

The phone can be operated with Power over Ethernet (PoE) provided via the network cable or, if PoE is not avaible in your network, with a 5V DC power adapter.

Optional

Optionnel

Opzionale

Opcional

If no PoE available

Wenn PoE nicht verfügbar

S'il n'y a pas de PoE

Si no se dispone de PoE

Se non disponibile PoE

Not included in delivery

Nicht im Lieferumfang enthalten

Non inclus

Non incluido

Non incluso

USB 2.0

Type/Typ A

USB 2.0

Type/Typ A

(snom 760)

USB 2.0

Type/Typ A

Optional

Optionnel

Opzionale

Opcional

Optional

Optionnel

Opzionale

Opcional

• Plug the Ethernet (network) cable into the RJ45 connector labeled “NET”, and plug the other end into the network side to establish a data link.

• The second RJ45 connector, labeled “PC”, is for daisy-chaining further Ethernet devices without the need for a second Ethernet connection line.

• If PoE is not available, use a 5V DC power supply (not included in delivery).

Note: Use only a power supply expressly recommended by snom; other power supplies

may damage or destroy the phone, affect its behavior, or induce noise. I

Insert the plug of the power supply into the connector labeled

5V DC

and hook up the plug to the wall outlet.

14

D765 | snom 760 User Manual

Setting up the Phone

C

onnecting a headset

You can use wired as well as wireless headsets with the phone.

• Wired headsets.

If you want to use a wired headset, connect it to the RJ audio jack labeled " ".

Note: If both a wired and a wireless headset are connected to the phone, incoming calls

will go to the wireless headset.

• Wireless headsets.

◦ D765: Connecting the headset to the phone via Bluetooth. See Appendix 6 on page 92.

◦ Snom 760: Connecting the headset to the phone via a Bluetooth adapter.

You need a Bluetooth adapter to use a Bluetooth headset with your phone. Insert the adapter into one of the two USB ports of the phone. See also the Quick Start Guides of the snom USB

BT and the snom HS BT or the manual of the third-party headset.

Attention: Starting with firmware version 8.7.2.11, the snom HS BT's parameter will be

the default setting for USB headsets.

- If your phone is running an earlier firmware version, enter the parameters of the snom HS

BT manually on the phone's web interface at > Advanced > Audio > text field of "Audio parameters". Click on the question mark

?

to look up the parameters.

- If you are using a different headset, whatever the firmware version, enter the parameters of the headset manually on the phone's web interface at > Advanced > Audio > text field of

"Audio parameters". Click on the question mark to use for your respective headset.

?

to find out which parameters you need

◦ Connecting the base station of your headset via the snom EHS Adapter

Connect the snom connector of the 7xx adapter cable to the port on the back of the phone, as shown in Fig. 1 and 2, below.

Note: You need to remove the footstand to gain access to the connector (see

"Attaching and detaching the footstand" on page 12). After you have inserted

the plug, make sure that the cable is lying flat against the bottomshell of the phone while you are attaching the footstand to the phone. Twisting or curling up the cable may result in damaging the cable and the wires inside it.

Please refer to the Quick Start Guide of the snom EHS Advanced and the manual of your wireless headset for further information on how to connect the snom EHS Advanced and the headset.

15

D765 | snom 760 User Manual

Setting up the Phone

Fig. 1 Fig. 2

I

nitializing and registering the phone

Prerequisites

To be able to use VoIP, you or your company must have:

• A broadband internet connection.

• Access to the internet via a router. This could be a separate device available in various versions from many different manufacturers or in the form of a router on a server or a PC.

• Account information provided by your network administrator or a VoiP account with a VoIP service provider who supports the VoIP SIP standard. The phone supports up to 12 VoIP accounts with one or more VoIP providers.

The registration information received from your Internet service provider or your network administrator may differ and may contain required and optional data. The required data normally includes:

• Account (usually the phone number). On snom phones, an account is called an "identity".

• Registrar

• Password

User name, authentication name, outbound proxy may also be required. These are settings that can only be configured on the web interface of the phone after it has been successfully registered. If your provider or your network provides a mailbox account, that setting is also configured on the web

interface. For more information, see "Identities/accounts" on page 64.

Initialization

snom phones are plug-and-play. Once the phone is connected to your network, it will begin to initialize.

Note: Normally the initialization is completely automatic, using DHCP. If the phone

cannot discover a DHCP server in the subnet, you will be asked: Are you using DHCP?

If your network does not support DHCP, press and enter the IP address, netmask, IP gateway, and DNS server manually. Ask your Internet service provider or your network administrator for them.

16

D765 | snom 760 User Manual

Setting up the Phone

Watch the display and, when asked to, make selections with and save with .

1. You will be prompted in English to select a language. Use to select another language, if applicable, and press to save the highlighted language.

2. Next, you will be prompted in the language of your choice to select a time zone. This affects the time shown on your display.

◦ Press the function key underneath to move to the beginning of the next time zone.

◦ Press to move up or down the list one item at a time.

◦ Press the function key underneath phone language is spoken.

to show only those time zones where the selected

◦ Press the function key underneath to show all time zones.

◦ Press to save the highlighted time zone.

3. Next, you will be prompted to select the tone scheme of a country. This affects the dial tone you hear when you pick up the receiver. Different countries use different dial tones.

◦ Press to move up or down the list one item at a time.

◦ Press to save the highlighted country's tone scheme.

4. The display shows the "Welcome" screen. Press any key to log on.

5. Enter the account number. Save with .

Note: See "Entering numerals, letters, special characters, and symbols" on page 24 on

how to enter numbers and letters.

6. Enter the registrar. Press .

7. Enter the password received from your Internet service provider or administrator and press .

After successful registration you will see the green handset symbol and the registered account

(identity) in the identity line underneath the date/time bar:

Infobar with date & time

Identity line

Identity for outgoing calls: Green symbol

Active identity:

Yellow symbol

Unregistered identity:

Note: If you see the account on the display preceded by one of the symbols / /

and the phone does not work, the server may be down, either for servicing or due to a malfunction. The registration and initialization should be completed as soon as the server is up and running again. You may want to check with your administrator or your provider if nothing happens within a reasonable amount of time.

What to do if initialization and registration are unsuccessful

Your network or your VoIP provider may require more login data than requested by the snom phone during the initialization and registration process. This data is entered on the web interface of the phone. Contact your network system administrator or your VoIP provider for more information.

1. When you have received all necessary data, open the phone’s web interface. See "Opening the web interface" on page 32 for more information.

17

D765 | snom 760 User Manual

Setting up the Phone

2. Open Configuration Identity 1 and enter any additional login information you have received from

your provider. See "Identities/accounts" on page 64 for more information.

Note: A number of IP telephony service providers and a number of SIP PBXs require

settings that are different from snom’s standard factory settings. snom’s web page lists numerous providers and PBXs that have been tested for interoperability with our phones and specific settings that may be required. Do not change the standard configuration unless you know what you are doing. Expert help may be required.

Correcting the clock

The phone receives the time and date from your NTP time server. If the time and/or date on the display are incorrect, you may need to set the correct time zone.

• Changing the settings on the phone and on the web interface: See "Time zone" on page 68.

If the time is still incorrect, there may be a problem with the time server. Contact your network administrator or your IP provider.

Default formats:

• Time. 24-hour clock, e.g. 17:35. Changing to AM and PM formats: See "Date and time formats"

on page 67.

• Date. US date format MM/DD/YEAR, eg. 11/23/2010. Changing to European format

DD.MM.YEAR, e.g. 23.11.2010: See "Date and time formats" on page 67.

18

D765 | snom 760 User Manual

G

etting to know your phone

Getting to Know Your Phone

A

t a glance

The factory settings at a glance:

Outgoing identity:

Call LED

• Blinking fast: Incoming call

• Steady light: In call OR

• Missed call. Press to turn off.

Handset speaker

Handset microphone

Handset rest tab

Casing speaker

Display - idle screen

P5 - P10

P11-P16

i

P1

P2

P3

P4

Labeling keys P5-P16: See

Appendix 3 for instructions.

Alphanumeric keypad

Freely programmable LED

keys P1 - P16

• Default setting: Line

• Fast-blinking LED: Incoming call. Press key or to accept

• Steadily lit LED: In call

• Slow-blinking LED: Call on hold

Context-sensitive, programmable function symbols and function keys

Select outgoing identity, incl. inactive identities

Call lists (missed, received, dialled calls)

Forwarding all calls (on/off)

Status information (call forwarding active, passwords not set, missed calls, etc.)

Press the function key to activate the function, open the list etc. depicted by the symbol above the key.

19

D765 | snom 760 User Manual

Getting to Know Your Phone

Navigation keys

• Confi rming, saving actions & input, and returning to previous screen

• Accepting calls on speakerphone and in headset mode

• From idle screen: Redial

• From idle screen: Selecting identity for outgoing calls

• In other contexts:

Navigate up/down

• From idle screen :

Received calls

• In other contexts :

Navigate/space left

• Canceling actions & input, and returning to previous screen

• Terminating calls on speakerphone and in headset & handset modes

• Turning off call LED after missed call

• From idle screen: Missed calls

• From idle screen :

Missed calls

• In other contexts :

Navigate/space right

Audio control keys

Adjusting the volume

• of the ringer when the phone is idle or ringing

• of the handset/casing loudspeaker when in a call

Keys with LEDs - key lights up when function is activated:

Muting and unmuting the microphone

Toggling between handsfree and handset mode. Press to dial number and accept calls on speakerphone.

Headset mode on/off

Dedicated, customizable function keys:

MWI key with LED

• Lit when message is waiting on mailbox

• Press to listen to message(s)

Turn DND (do not disturb) on/off

Directory

Settings menu

Transfer call

Hold call

Star key

a A

• In editing mode:

- Press for one second to change input mode (numerals > lower case > upper case)

- Press briefl y to type *

• On idle screen: Press for 3 seconds to lock/unlock the

keypad

20

Pound (hash) key

#

:

Rescue mode for TFTP update

D765 | snom 760 User Manual

Getting to Know Your Phone

L

ED indicators

Call indicator

The bright-red LEDs situated around the upper right corner of the phone indicate incoming, ongoing, held, and missed calls. They will be:

• Blinking rapidly when a call is coming in

• Glowing steadily when dialling and when in a call

• Blinking slowly when you have put a call on hold

Function key LEDs

Depending on the function mapped onto the key, the red or green LEDs on the key will be activated when the key event occurs. The factory setting is red LED and “line”. The LEDs of a line key will:

• blink rapidly when a call is ringing on the line;

• glow steadily when there is an ongoing call on the line;

• blink slowly when a call is on hold on the line;

• be off when the line is free.

When other functions are mapped onto the keys, the LEDs may glow or blink. For example: When the

"extension" function has been mapped onto a key to monitor an extension, the LED will

• blink rapidly when a call is ringing on the extension;

• glow steadily when the extension is busy;

• be off when the extension is not busy.

Message LED

Glowing red when there is a new message on the mailbox.

21

D765 | snom 760 User Manual

Getting to Know Your Phone

H

ard keys

Freely programmable function keys with LEDs

These are freely programmable function keys that can be programmed on the Function Keys page of the phone's web interface, keys P1 - P16. For information on how to map functions onto these keys,

see "Configuring the function keys" on page 58. The factory default setting is "line".

Context-sensitive, programmable function keys

These function keys can be programmed on the "Function Keys" page of the phone's web interface with a number of key events; these functions will then be available when the phone is in idle mode. For

more information, see "Configuring the function keys" on page 58. For the factory default settings, see

"At a glance" on page 19.

You cannot change the functions that are available when the phone is active, for example when you are in a call, when the phone is ringing, etc. Depending on the activity, different functions will be available.

Navigation, confirmation, and cancel keys

can be programmed with the key events available in their drop-down menus. See "Configuring the function keys" on page 58 for further information. Factory settings:

Navigation key

• On idle screen: Press to select identity for outgoing calls

• In other contexts: Moving up and down lists one item/button at a time

• In text fields, press to move the cursor to the left one character at a time.

• On idle screen, press to open list of received calls.

• In text fields, press to move the cursor to the right one character at a time.

• On idle screen, press to open the list of missed calls

• Press to accept calls on speakerphone and in headset mode.

• Press to confirm actions/settings and return to preceding screen.

• Idle screen: Redial.

• Press to terminate calls on speakerphone and in headset and handset modes.

• Press to cancel actions and return to preceding screen.

• Idle screen: Press to turn off LED indicating missed call(s).

22

D765 | snom 760 User Manual

Getting to Know Your Phone

Preprogrammed, variably programmable function keys

The factory settings for these keys are printed on the phone's casing. Other functionalities can be

programmed onto them. See "Configuring the function keys" on page 58 for more information.

Message key with LED

• Lit when new message is waiting on mailbox

• Press to retrieve messages

Turn "do not disturb" (DND) mode on and off. In DND mode incoming calls do not ring; callers hear the busy signal.

Exception: Phone numbers on your directory's VIP list (see Contact

Types)

Press key to turn DND on and off. When it is on, you'll see the DND symbol on the display.

Phone directory. See "Directories" on page 36 for further information.

Settings menu. See "Settings" on page 28 for further information.

Transfer key. See "Transferring calls" on page 53 for further information.

Hold key. See "Hold" on page 50 for further information.

Audio Control Keys

Press the right or left edge of the key to adjust the volume

• of the ringer when the phone is idle or ringing

• of microphone/loudspeaker when in call

Keys with LEDs. The key lights up when the function is activated:

Muting and unmuting the microphone

• Toggling between handsfree and handset mode

• Dialing numbers on speakerphone

• Accepting calls on speakersphone

23

D765 | snom 760 User Manual

Getting to Know Your Phone

Toggling between headset and handset modes.

Note: Handset mode overrides headset mode. When the handset is picked up, the

LED of the headset key will turn off, indicating that you can now use only the handset for the call. The phone will return to headset mode when the handset is placed in the cradle; the LED lights up again.

Alphanumeric Keypad

Input modes and navigation

Current input mode:

Next input mode:

Changing input mode:

:

:

Move cursor to the left

Move cursor to the right

Input modes:

123: Numerals abc: Small letters

ABC: Capital letters

Redial

Directories, call lists, contact list, favorites

Delete character to the left of the cursor

Press any key on the alphanumeric keypad or pick up handset to open the "Enter Number" screen.

The current input mode is indicated in the information line. Press the left function key underneath the display to switch to the input mode indicated by the symbol directly above it in the function key line.

Text in Information Line

= current input mode

123 abc

ABC

Press function key to switch to input mode indicated by symbol in Function Key Line

Entering numerals, letters, special characters, and symbols

When entering letters and special characters, pause briefly after each character until the cursor has moved forward so that you won't write over the last character you entered. Pausing is not necessary when entering numerals.

Numerals. In numeral mode, press the respective number key to type the number printed on the key.

Letters. When in input modes small and capital letters, press the alphanumeric key with the respective

letter one, two, three, or four times quickly to type the first, second, third, or fourth letter printed on the key. Pause briefly after each letter.

Example: In small letter mode, press the "2" key once to type an "a", twice to type a "b",

and three times to type a "c".

24

D765 | snom 760 User Manual

Getting to Know Your Phone

Letters with accents and umlauts. When in input modes small and capital letters, press the

alphanumeric key with the basic form of the respective letter as many times as necessary. Pause briefly after each letter. Available letters with accents and umlauts depend on the phone's language setting.

Example: If the phone language is German, press key "2" four times to type "ä".

Entering special characters and symbols. In input modes small and capital letters, press keys "0"

and "1" one or more times quickly. Pause briefly after each character or symbol.

• Period. Press "1" once.

• Space ("˽"). Press "0" once.

• Underscore ("_"). Press "0" twice.

• Special characters listed in the table. Press "1" as many times as indicated.

1x .

2x + 3x @ 4x 1 5x

7x ?

8x !

9x 10x _ 11x

:

/

6x

12x

,

\ 13x (

14x ) 15x ; 16x & 17x % 18x * 19x #

20x < 21x = 22x > 23x $ 24x [ 25x ]

D

isplay layout

In idle mode When active

Infobar

Confi gured identities

Status line

Function key line

Context-sensitive function key symbols

Idle Mode

In idle mode, the display presents the following information:

Info bar: Date and time.

25

Context area

D765 | snom 760 User Manual

Getting to Know Your Phone

Context area: Configured identities.

Outgoing identity

• The current outgoing identity is indicated by the lighter line and the green box with the handset symbol: is your identity for the call.

. When you call someone, this

• Select a different identity for the next call by pressing on the navigation key.

Active identity

• Can be called

• Can be selected as the outgoing identity for making calls by pressing on the navigation key.

Identity not properly registered.

Identity trying to register.

Identities can be unregistered without removing the registration settings by changing their status to "inactive" on the phone's web interface. Inactive identities are not displayed on the idle screen. They cannot be called or selected as the outgoing identity.

To reregister the identity, open the phone's web interface > Configuration Identity (1-

12).

1. Change the "Identity active" setting to "on".

2. Click on "Re-Register".

3. Click on "Save".

For information on configuring new identities or modifying existing ones, see "Identities/accounts" on page 64.

Status bar

Any of numerous messages concerning the current status of the phone might be displayed in this bar, for example the availability of a firmware update, a reboot being required, etc. If there is more than one current status message at any one time, the one with the highest priority will be shown. For a comprehensive list in descending order of priority, see Appendix 1.

Two of the most common status messages you will see in idle mode are:

• The text "CFwd:" and the phone number calls will be forwarded to when call forwarding (when busy or no answer) is activated. When there are missed calls, this information is replaced by the missed calls information.

• The warnings "HTTP Password not set" and "HTTP Password not set". They can be turned off by either setting the passwords or turning them off manually.

26

D765 | snom 760 User Manual

Getting to Know Your Phone

Deleting status messages:

◦ Messages will be deleted automatically when the underlying cause is removed, i.e., call forwarding is turned off, HTTP password is set, etc.

◦ Manually: Press , if the button is available, or > 6 Information > 1 Status info to open the "Status info" screen. Use / to select an item from the list and press

Del

to delete

Function key line

The symbols on the buttons in this line depict the functions that can be activated by pressing the function key underneath the respective symbol. See for a complete list. The factory defaults are:

Outgoing Identity screen: Displays the complete URIs of all active identities.

Call lists (missed, received, and dialed calls). See "Call lists" on page 54.

Forwarding all calls (on/off). See "Call forwarding" on page 56 and 70.

Phone's IP address and URL of snom's web page

Displaying all currently available status messages. This key is available whenever a status message becomes newly available even when a different function is mapped onto the far-right context-sensitive function key underneath the display.

Press the key to display the status messages; press DEL to delete the highlighted status message. When all messages have been deleted, the symbol will disappear from the function key line; the message in the status line will also disappear.

If you have mapped (programmed) a different function onto the key, that function is now available on this key again. If you have mapped the "Status messages" function onto the key, the key will remain blank until a new status message becomes available or until a reboot when all current status messages will be displayed anew.

When the phone is active

The display will inform you of any activity the phone is engaged in. This information is presented in the form of text or symbols or both.

Info bar: Name of current activity and time.

Context area: Depending on the activity, this area will contain symbols (incoming call ringing,

outgoing call ringing, etc.) and text like the phone number calling, the extension number being called, conference partners, etc.

Status bar

In editing modes (i.e., when dialing or editing directory entries), the current editing mode (i.e., numerals, small letters, or capital letters) is shown preceding the status message, if any (see ):

27

D765 | snom 760 User Manual

Getting to Know Your Phone

Function key line

Depending on the current activity of the phone, the key function key line will present various functions

that can be activated by pressing the function key underneath the respective symbol. See "Appendix

1 - Display Symbols" on page 79 for a list of available functions.

S

ettings

A comparatively small number of settings can be adjusted on the phone; many more are available on the phone's web interface.

Phone settings

Press to open the settings menu on the display. To open submenus and settings, press its number on the alphanumeric keypad.

In administrator mode

1

Preferences

1

Time Zone

2

Tone Scheme

3

Ringer

4

Language

5

Display

1 Backlight on activity

2 Backlight when idle

3 Expansion

Modules

1

Appearance

2 Backlight on activity

3 Backlight when idle

4

Contrast

6

Fkeys

7*

Bluetooth

2

Call Features

1

Call Forwarding

1

Forward all

2

When busy

3

On timeout

2

Outgoing Calls

1

Auto Dial

2

Auto Redial Busy

3 Number

Guessing

4

Call Completion

5 Hide own outgoing ID

3

Incoming Calls

1

Reject anonymous

2

Call Waiting

3 Auto Answer

Indication

* If available on phone model

** If connected to phone

3

Identity

1 Outgoing

Identity

2

Reregister

3

Edit

4

Logoff

5

Logoff all

6

Call Voicemail

4

Network

1

IP Setting

2

Webserver

1

Webserver Type

2

HTTP Admin

3

HTTP Password

3

VLAN

1

VLAN ID (0-4095)

5

Maintenance

1

System Info

2

User Mode

3

Reboot

4

Reset Values

5

Change PIN

6 Check for

SW Update

7**

Vision

6 (5)

Information

1

Status Info

2

System Info

3

Help

2 VLAN Priority

(0-7)

3

Reset VLAN

4

WLAN

1 Scan

WiFi Networks

2

Manual Setup

3

Switch off WiFi

5 Ethernet

Detection

6

802.1X

Network settings not accessible in user mode

In user mode

4

Maintenance

1

System Info

2

Administrator

Mode

3

Reboot

4

Change PIN

5 Check for

SW Update

6**

Vision

6 (5)

Information

1

Status Info

2

System Info

3

Help

28

D765 | snom 760 User Manual

Getting to Know Your Phone

The submenus and the settings shaded black and gray are not available when the phone is running in user mode. The factory setting is administrator mode. For more information on user/administrator

modes, see "User mode/administrator mode" on page 34.

Note: When the phone is in administrator mode and the Maintenance menu is on the

display, pressing key 2 will switch the phone to user mode.

When the phone is in user mode and the Maintenance menu is on the display, press key

2 to switch the phone to administrator mode. You will be asked for the administrator password. The default administrator password is 0000 (4 x zero).

Most of the individual settings are described elsewhere in this manual: See "Using the phone" on page

44 and "Customizing the phone settings" on page 64.

Adjusting the Backlight

The backlight on the display of the phone and any connected expansion modules can be adjusted separately for the times when the phone is active and when the phone is idle. Lowering backlight intensity lowers the energy consumption of the devices.

The backlight when idle can be turned off by reducing the number of vertical bars to one. The phone will switch the backlight to idle mode after the period of inactivity in seconds as specified on the phone's web user interface.

Adjusting the backlight on the phone's display

• Intensity.

1. Press .

2. Press 1 Preferences.

3. Press 5 Display.

4. Press 1 Backlight on activity or 2 Backlight when idle.

5. Press right or left arrow on the navigation key to increase ( ) or decrease ( ) the backlight's intensity.

6. When done, press to save and return to Display menu (Fig. 1).

Fig. 1 Fig. 2

Fig. 3

• Setting the number of seconds after which the phone will switch from activity to idle backlight:

1. Open the phone's web interface (see "Opening the web interface" on page 32).

2. Click on "Preferences" (see "How the web interface works" on page 33).

3. Enter the number of seconds in the text field of "Dim after (in seconds)" (in the section

"General Information". The default is 20 seconds.

4. Click on "Apply" and "Save".

29

D765 | snom 760 User Manual

Getting to Know Your Phone

Adjusting the display settings on the connected expansion modules

The intensity of the backlight on the displays can be adjusted separately for the phone and the connected expansion modules, both for the times when the phone is active and when the phone is idle.

Lowering backlight intensity lowers the energy consumption of the devices.

Note: The number of seconds after which the expansion modules will switch from activity

to idle backlight is the number set for the phone display's backlight (see "Adjusting the backlight on the phone's display" on page 29).

• Adjusting the intensity of the backlight.

1. Press .

2. Press 1 Preferences.

3. Press 5 Display.

4. Press 3 Expansion Modules.

5. Press 2 Backlight on activity or 3 Backlight when idle.

6. Press right or left arrow on the navigation key to increase ( ) or decrease ( ) the backlight's intensity. The setting applies to all expansion modules connected to the phone.

7. When done, press to save and return to Expansion modules menu (Fig. 4).

Fig. 4 Fig. 5 Fig. 6 Fig. 7

• Adjusting the appearance of the data on the display (tiles or lines; for more information, see the

D7 User Manual, chapter Display layout.

1. Press .

2. Press 1 Preferences.

3. Press 5 Display.

4. Press 3 Expansion Modules.

5. Press 1 Appearance.

6. Press 1, 2, and/or 3 to change and simultaneously save the display layout of the first, second, or third connected expansion module, respectively, from lines to tiles and vice versa (Fig. 7).

7. When done, press to save and return to Expansion modules menu (Fig. 4).

8. Press 4 Contrast.

9. Press right or left arrow on the navigation key to increase ( ) or decrease ( ) the backlight's intensity. The setting applies to all expansion modules connected to the phone.

10. When done, press to save and return to Expansion modules menu.

30

D765 | snom 760 User Manual

Getting to Know Your Phone

The phone's web interface

Opening the web interface: See page 32.

Firmware versions below 8.7.4

When the web interface is opened for the first time upon initialization, you will see the Security page.

Making Calls in Headset BT Mode

Please, consult the headset's manual for more information on how to use it. The headset behavior described in the following description applies to the three tested headsets with the firmware on the headsets and the phone at the time. The behavior with other firmwares and on other headsets may be different.

When you use the Bluetooth headset`s call key for dialing a number entered manually on the keypad or selected from the directory or a call list, there is no offhook-on-idle. The voice dialing function on the headset must be activated for dialing, except for tone schemes using local DTMF tones, like the USA.

Turning on Voice Dialing

On the three tested headsets, the voice dialing function is activated by pressing the call key for approx. 1 to 2 seconds until you hear the "voice dial" message or signal (be careful that you do not press the key too long, or you may turn off the headset!).

Dialing

You can press either press the call key on the headset or the OK key / on the phone to begin dialing a phone number entered manually or selected from the directory or a call list.

Tone schemes using local DTMF tones (e.g., USA). Voice dial function not required. Enter the number on the phone's keypad and briefly press the call key to dial.

All other dialing methods.

Tone schemes without local DTMF tones (e.g., Germany): Enter the number on the phone's keypad and long-press the headset's call key to voice dial the number or press the phone's OK key to dial.

Directory: Select the number from contact in the directory and long-press the headset's call key to voice dial the number or press the phone's OK key to dial.

Accepting calls in headset mode: Press the OK key / on the phone or the call key on the headset.

In-call functions (hold, conference, transfer call, mute microphone,volume, etc.): Please, consult the phone's manual.

Accepting Calls

Accepting calls in headset mode: Briefly press the call key on the headset or press the OK key / on the phone.

Ending Calls

Briefly press the headset's call key or press the Cancel key on the phone / .

Adjusting Headset Volume

On the phone. When the BT headset is activated, as indicated by the illuminated LED of the headset key on the D765 or by the symbol BT on the left side of the status line on the D375 (Fig. 6), you can use the phone's volume key. The phone will retain the setting for calls with the BT headset and transmit it to the BT headset until the volume is adjusted again, either on the idle phone or when transmitted by the headset during a call.

Fig. 7

On the headset. Using the volume key(s) on the headset adjusts the volume immediately. When headset BT mode is the active audio mode on the phone, the new volume will also be transmitted to the phone and saved. When headset BT mode is not the active audio mode on the phone, the headset will not transmit the new volume setting to the phone; the next time audio is activated from the phone, the headset volume setting will be overwritten by the volume setting stored on the phone.

Muting the Microphone

During a call, you can mute/unmute the headset's microphone by pressing the Mute button on the headset. On the tested

Sennheiser and Plantronics headsets you can also press the Mute key on the phone . On the Jabra headset, muting from the phone is not supported at the moment.

Location of mute button on the three tested headsets:

- Sennheiser MB PRO 2 UC. Dual function of volume slider on the outside of the ear piece below the boom. Press to mute microphone, press again to unmute .

-

-

Jabra Motion UC. Mute button is on the lower end of the microphone boom.

Plantronics Voyager Legend. Mute button is on the upper end of the microphone boom.

Mute microphone indication

D765: Red LED on mute key is on. When the microphone is unmuted, the red LED is turned off.

D375: The symbol of the muted microphone is shown in the status line next to the " BT" symbol. When the microphone is unmuted, the symbol disappears.

On the headsets: Muted-microphone message or indication.

Fig. 8

We urge you to set administrator and HTTP passwords to protect your phone from remote attacks.

The default administrator password is 0000 (4 zeros); there is no default HTTP password. Please

note:

- If you do not replace the default administrator password by an individual one, an unauthorized third party with access to the phone could set an administrator password unknown to you. In such a case, you would no longer be able to switch from user mode to administrator mode.

- If you do not set an HTTP password, you make it easier for experienced hackers to break into your system.

- If you set your own passwords, be sure to write them down and store them in a secure place.

Without the administrator password, you will not be able to return the phone and the web interface from user mode to administrator mode; many settings will be inaccessible.

Without HTTP password you cannot open the phone's web interface.

If you do not wish to set an HTTP password, you can turn off the reminder on the phone’s display until the next reboot or forever by clicking on the respective button. If you change your mind later, you can set the password on the phone’s web interface, "Advanced" page > "QoS Security" tab > "HTTP

Server" or turn off the warning later on the "Advanced" page > "QoS Security" tab > "Security" > setting "Ignore security advices".

31

D765 | snom 760 User Manual

Getting to Know Your Phone

Firmware versions 8.7.4 and higher

When you register the first account during the initialization of the phone, your SIP user name and password will be registered as the HTTP user name and password. If you wish to change them later, you can do so on the phone's web interface > Advanced > QoS Security > HTTP Server.

Note:

- If you do not replace the default administrator password by an individual one, an unauthorized third party with access to the phone could set an administrator password unknown to you. In such a case, you would no longer be able to switch from user mode to administrator mode.

- If you set your own passwords, be sure to write them down and store them in a secure place.

Without the administrator password, you will not be able to return the phone and the web interface from user mode to administrator mode; many settings will be inaccessible.

Without HTTP password you cannot open the phone's web interface.

Opening the web interface

1. Look up the phone's IP address: > 6 Information > 2 System Info.

2. Open a web browser on your PC. Enter the IP address, preceded by "http://" in the address bar

(for example: http://192.168.10.115) and press ENTER. The home screen opens:

32

D765 | snom 760 User Manual

Getting to Know Your Phone

How the web interface works

The vertical menu on the left side of the window is always the same, no matter which window happens to be open at the time. Available menu items depend on whether the phone is running in user or administrator mode.

Click on a menu item to open that page. Some pages contain several documents. To make a document visible, click on its tab. The font weight of the characters on the active tab is bold. Only one tab can be active at a time.

Note: Any changes you make will not take effect until you click on "Apply". Changes will

be lost if you open another page of the web interface or if you close the web interface without first clicking on "Apply".

After you have clicked on "Apply", the "Save" button will appear at the top of the page.

Click on "Save" to save the changes permanently. Changes that have not been saved will be lost if and when the phone loses power or is disconnected from its power source.

On the right of each setting, there is a link symbolized by the question mark. Click on this link to open a wiki page with information on the setting (description, valid and default value, links to connected issues, etc.). Click on the return button of your browser to return to the phone's web interface.

Note: You may have to enter your HTTP password to return to the phone's web interface.

Web settings overriding manual phone settings

In some cases settings activated on the web interface override manual settings on the phone. If a setting you have made on the phone does not appear to take effect, look for a conflicting setting on the web interface.

33

D765 | snom 760 User Manual

Getting to Know Your Phone

U

ser mode/administrator mode

snom phones can be operated in administrator or user mode. In administrator mode, all settings are accessible and can be modified; in user mode, a number of settings are not accessible. The factory default is administrator mode.

When the phone is running in user mode, the administrator password is required to revert to administrator mode. The default administrator password is 0000 (4 x zero). We can recommend that you change the password.

Note: Do not forget to write the new password down and store it in a safe place; without

it, a TFTP reset to factory values is necessary to return the phone to administrator mode.

If your phone is administered centrally, user mode may be the rule. Please check with your administrator.

User mode on the phone

The "Identity" and "Network" menus and the setting "Reset Values" in the "Maintenance" menu are inaccessible.

User mode on the web interface

Some windows like "Preferences" are available in user mode while many are not. The menu item

"Advanced" is available but the settings normally found on it are not. In user mode the two pages look like this:

To return the phone and its web interface to administrator mode, open the Advanced Settings page, enter the administrator password in Administrator Login and click on "Apply". The default password is

0000 (4 x zero). The two pages in administrator mode look like this:

34

D765 | snom 760 User Manual

Getting to Know Your Phone

• If a window contains several pages, click on the tab at the top to open the page. The font weight of the characters on the tab of the visible page is bold.

• Any changes you make will not take effect until you click on "Apply". Changes will be lost if you open another page of the web interface or if you close the web interface without first clicking on

"Apply".

Note: Whenever you click on "Apply", the "Save" button will appear at the top of the

page. Click on "Save" to save the changes permanently. Changes that have not been saved will be lost if and when the phone loses power or is disconnected from its power source.

35

D765 | snom 760 User Manual

D

irectories

Directories

D

irectory

The directory is the built-in directory of the phone. It can hold 1000 entries. Entries can be added and edited on the phone and on the web interface.

Any changes you make on the web interface will not take effect until you click on "Save" or on "Apply" and "Save", depending on your firmware version. Changes will be lost if you open another page of the web interface without first clicking on "Apply"/"Save".

Definitions, explanations

Directory entries

Each entry must have at least one phone number; multiple associated phone numbers are possible. If you do not enter a first and/or last name and/or nickname, the phone number will appear under both

"Name" and "Number".

• Entry with one phone number:

• Entry with several associated phone numbers:

Number area (N): Individual settings for the master record and each subentry possible.

Blue area. Data can be different for each associated phone number. If subentry textfi elds are blank, the data from the master record is displayed.

Name area. Same data for the master record and all subentries.

Master record (M)

N

M

M

Subentry 1

N

M

Subentry 2

S

M

M

S

N

36

M M

Blue area of Subentry 2: Different "Group" selection (S), different entry in textfi eld of "Email" (S). No entry in text fi elds of

"Title" and "Organization", therefore same as Master Record.

D765 | snom 760 User Manual

Directories

Contact Types

VIP: Calls from numbers with this contact type will ring on your phone even when DND mode is active.

You can assign a ringtone to this contact type. If your VIP is also assigned to a group (see below) and if that group has a distinct ringtone, the ringtone assigned to the group will be played.

Deny List: Calls from phone numbers with this contact type will not ring on your phone. The caller hears the "Busy" signal.

Outgoing identity

The default setting is "Active" which means that the phone will use the current outgoing identity whenever you dial the number of the phone book entry.

You can also select a specific identity to be used as the outgoing identity whenever the number is dialed, for example, if you want to use a specific VoIP provider for these calls.

Note: To use an outgoing identity specified in the directory, you must dial the number

from the directory. If you simply type it on the keypad, the current outgoing identity, as indicated on the display, will be used.

Group

The available group types are Friends, Family, Work, Colleagues. You can assign a distinct ringtone to each group type.

Ringtones

The phone has 10 built-in ringtones that can be assigned to identities, group types, and contact types.

It is also possible to download a custom melody.

Assigning ringtones to identities: See "Identities/accounts" on page 64.

Assigning ringtones to contact type VIP and group types

Preferences > Directory Ringtones.

Select a ringtone from the respective drop-down menu and click on "Apply". If you choose "Custom

Melody URL", enter the URL to the data file in the text field. It must be a file of the type PCM 8 kHz 16 bit/sample (linear) mono WAV.

Note: Ringers assigned to contact type VIP and to any of the group types override the

ringers assigned to the identities. For example, if you have assigned ringer 1 to one of the identities and ringer 2 to the group "Colleagues", the phone will play ringer 2 when a contact from the "Colleagues" group calls that identity.

37

D765 | snom 760 User Manual

Directories

Adding/Editing Entries on the Phone

Adding new entry manually

1. Press to open the phone's directory.

2. Press on the navigation key to go straight to <New Item>.

3. Press .

4. Enter the phone number and press .

5. Enter a nickname in the text field of "nick name" (optional) and/or press . The "Details" screen opens.

Note: Entering a nickname is optional. If you don't enter one, the entry will be listed

under the phone number. You can add a first and last name later by editing the entry on the phone or on the web interface.

6. See "Editing existing entry" on page 39 on how to continue.

Adding new entry from call list

1. Press to open Call history.

2. Press number key to select a call list.

3. Use / to select a call.

4. Press "Details".

5. Press /"Save" to add the name (if the name was transmitted) and number to the phone directory. If the name is not shown, the number will be used in its place.

See "Editing existing entry" on page 39 on how to add a name, phone type, group, etc.

Adding current caller

Press to add the caller's name (if transmitted) and phone number to the directory. If the name is not shown, the number will be used in its place.

See "Editing existing entry" on page 39 on how to add a name, phone type, group, etc.

Sorting entries

1. Press

2. Press

3. Press etc.).

to open the phone's directory.

.

/ to select the criterion for sorting (nickname, first name, last name, organization,

38

D765 | snom 760 User Manual

Directories

Editing existing entry

1. Press to open the phone's directory.

2. Selecting an entry: Scroll to the entry or enter the first letter of the name.

3. Press . The "Details" screen for the entry will be displayed.

4. Editing a detail. a. Press / and to select a detail. Depending on the detail, b. in some cases, you will see the prompt screen where you can enter or modify text. Edit the data, if necessary, and press to save and to open the next screen. See also Entering numerals, letters, special characters, and symbols.

In other cases, you will see a succession of screens with context-sensitive buttons. Example:

Modifying the settings of "group". i. Select "group" with and . The "favorite" screen opens.

ii. Use / and to select yes or no. The "group" screen opens.

iii. Use / and to select family, friend, colleague, work, or none. The "contact type" screen opens.

iv. Use / and to select VIP, block, or none.

c. When you are done editing the entry, press .

Deleting an entry

1. Press to open the phone's directory.

2. Selecting an entry: Scroll to the entry or enter the first letter of the name.

Note:

If there is more than one phone number associated with the entry and you want to delete only one of them, press . Select the number you want to delete with / and press the function key .

3. Press . You will be asked, "Are you sure?".

4. If you are, press .

Adding/editing entries on the web interface

Click on Directory in the menu on the left side.

Adding new entry

1. Type data in text fields of "Add or Edit Entry“.

◦ Number: Type the number exactly as you would dial it, with country and area codes, if necessary, and without parentheses, hyphens, blank spaces.

◦ Number Type: Select the type of connection from the drop-down menu. The default setting is

SIP.

◦ Contact Type: Select "None", "VIP", or Deny" from the drop-down list. The default setting is

"None".

39

D765 | snom 760 User Manual

Directories

- Calls from entries on the "VIP" list will always ring on the phone, even when the phone is in a call or in DND mode.

Note: You can assign a distinct ringtone to the contact type "VIP": Preferences

> Directory Ringtones.

- Calls from entries on the "Deny" list will not ring on the phone. The caller will always hear the busy signal.

◦ Outgoing Identity: The drop-down list shows all identities configured on the phone. If you select one of the identities for one of the numbers listed in the phone book, all calls to that number initiated from the phone book will show that identity on the callee’s phone.

◦ Blue area: The data entered in the textfields will be displayed when the entry is opened on the phone. The data can be used to sort entries by group, name, organization, etc., and can be edited on the phone.

- "Group" drop-down menu: Available types are "Friends“, "Family“, "Colleagues“, or "Work".

You can assign a distinct ringtone to each group type: Preferences > Directory Ringtones.

- "Nickname": If you enter a nickname, it will appear under the "Name" header of the

Directory on the web interface.

◦ First name, family (last) name: Will be added in this order under "Name" in the directory, unless you have also entered a nickname.

◦ Birthday. Uses the format set at Preferences > General information > U.S. Date Format (mm/ dd): "On" or "Off". Enter in DD.MM.YR or MM/DD/YR format. Examples:

Date Input

March 5, 1980

March 12, 1980

5.3.80 or 3/5/1980

12.3.80 or 3/12/1980

October 5, 1980 5.10.80 or 10/5/1980

October 12, 1980 12.10.80 or 10/12/1980

◦ Favorite: Tick box to add entry to "Favorites" list.

Output when US Date Format setting is

On Off

3/5/80

3/12/80

10/5/80

10/12/80

5.3.80

12.3.80

5.10.80

12.10.80

2. Click on "Add/Edit" to save new entry to directory.

Editing an entry

When you open an existing entry, the current information is displayed in the text fields of "Add or Edit

Entry" and two additional buttons, "Add Sub" and "Change", are available.

• Editing

◦ If single entry, click on in the entry's line.

40

D765 | snom 760 User Manual

Directories

◦ If there is more than one number associated with a name:

- Click on in the name's line if you wish to edit/add the first or last name of the date of birth and the data in the blue area applicable to the master record.

- Click on in a phone number's line if you wish to edit the subentry`s data (phone number, number & contact type, outgoing identity, and any blue area data applicable to this subentry only).

Make changes as necessary and click on "Change".

• Adding additional phone number (subentry) for a name

◦ Jane Smith's entry has only one phone number, her SIP phone number. In this example, the phone number of Jane Smith's landline will be added to the directory.

- Click on in Jane Smith's line. The data is shown in "Add or Edit" area (Fig. 1).

Fig. 1 Fig. 2

- Enter the phone number in the text field of "Number" (Fig. 2).

- Select "fixed" from the drop-down menu of "Number type" (Fig. 2).

- If you wish, select a contact type and an outgoing identity from drop-down lists (Fig. 2).

- Click on "Add Sub" (Fig. 2).

◦ John Miller's entry has a SIP number and a private number. In this example, his cell phone number will be added as a third number.

- Click on in the line containing John Miller's name. The data is shown in "Add or Edit" area.

- Enter the phone number in the text field of "Number".

- Select the number type.

- If you wish, select a contact type and an outgoing identity from the respective drop-down list.

- Click on "Add Sub".

The directory now contains Jane Smith's landline number and John Miller's mobile phone number.

41

D765 | snom 760 User Manual

Directories

Deleting entry on web interface

• Click on in the line of the master record to delete the name and all associated phone numbers.

• Click on in the line of a phone number subentry to delete that subentry, but keeping the master record and any other subentries.

Dialing from phone directory

To dial, click on in the line of the phone number.

Deleting whole directory

Deletes entire directory irretrievably!

Importing/Exporting Directory

See our Wiki at http://wiki.snom.com/Web_Interface/V7/Directory.

42

D765 | snom 760 User Manual

Directories

E

xternal directories

Provided by your network, your VoIP provider, or another external source.

LDAP

Enter the necessary data received from your administrator, VoIP provider or other external source in the text fields of the phone‘s web interface > Advanced > Network > LDAP and click on "Apply" and

"Save".

Enter the first letter of the name you are searching for. Type more letters if the name shown isn't the right one or scroll through the list. Press to dial.

Contacts

On the phone's web interface > Configuration Identity # > "SIP" tab > "Contact list" click on the radio button "on". Enter the URI received from your administrator, VoIP provider or other external source in the text field of "Contact list URI" and click on "Apply"/"Save".

To dial a contact on the phone, enter the first letter of the name you are searching for. Type more letters if the name shown isn‘t the right one, or scroll through the list. Press to dial.

43

D765 | snom 760 User Manual

Using the Phone

U

sing the phone

This section describes the functions of the phone with the factory default settings. If your phone was installed and/or set up by someone else, the default settings may have been changed. Please check with that person or company if the phone does not react as described here.

The caller information displayed on the screen is controlled by a setting on the phone‘s web interface.

The default setting is "Name". You can change the setting at Preferences > General Information >

Number Display Style by selecting a different option from the drop-down list.

M

aking calls

See "Entering numerals, letters, special characters, and symbols" on page 24 for information on input

modes and entering letters, numerals, and special characters.

Selecting identity for current outgoing call

See "Identities/accounts" on page 64 on how to configure identities.

If more than one identity is shown on the display, the one on the dark bar is the outgoing identity for the call and the number/name that will show on the callee’s phone. Use or to select another identity.

Using different audio devices

Handset

• Pick up the handset, enter the phone number, and press . OR

• Enter the phone number and pick up the handset.

Headset

Enter the phone number and press or headset key. If Bluetooth headset, see also Appendix 6 on

page 92.

Speakerphone

Enter the phone number and press the speaker key.

Handset or headset and casing speaker

1. Use the method for handset or headset use to dial.

2. When the call has been established, press listen to the party on the other end. Press the key, which has changed to speaker off.

to allow other persons present in the room to

, again to turn the

44

D765 | snom 760 User Manual

Using the Phone

Using different dialing methods

Auto dial

If a time span in seconds has been selected from the drop-down menu at Advanced > Behavior >

Phone Behavior > Auto Dial, the phone will dial the number on the display when the specified number of seconds has elapsed.

Redialing

1. Press to show the last 100 numbers dialed, with the very last number at the top.

2. Press to dial that number or use / to select a different number and then press .

Calling number from call history (missed, received, dialed calls)

1. Press .

2. Press the number of one of the lists to open that list.

3. Use / to select a phone number.

4. Press to dial the number.

Calling number from phone directory

1. Press .

2. Use / to select a name or enter the first letter(s) of the name on the alphanumeric keypad.

3. Press to dial the number.

Speed dialing

Setting speed dial numbers: See "Speed dial" on page 74. Mapping a speed dial number onto one of

the programmable virtual function keys 1-15: See "Configuring the function keys", "Example 3, Speed dialing" on page 62.

• Speed dial number on speed dial list

1. Enter the speed dial number (0-30) or character (#, *) assigned to the phone number you wish to dial.

2. Press to dial.

• Speed dial number mapped onto freely programmable function key 1-16: Press the key.

Calling emergency numbers

Numbers specified as emergency numbers can be dialled even when the keyboard is locked! See

"emergency nos" on how to set emergency numbers. Several numbers (911, 112, 110, 999) have been preconfigured.

• On an unlocked keyboard: Enter the number and press to dial.

45

D765 | snom 760 User Manual

Using the Phone

• On a locked keyboard: Enter the number. The phone dials the number as soon as you have entered all the digits.

Call completion

Note: This function depends on whether it is available in your network or not. On snom

phones call completion means that when a called number is busy or not available, your phone will call you back as soon as the dialed number is not busy anymore or available again. The factory default setting is "off".

Changing the setting to turn on call completion : See "Call completion" on page 72.

When call completion is enabled, number. Press

will appear in the function key line whenever you dial a

to activate call completion for this call.

• Press to turn off call completion for this call.

• Press if you wish to dial another number while waiting for call completion. You can now dial another number, receive calls, or hang up the handset to return to the idle screen. Call completion will not interfere with the normal operation of your phone.

When the number becomes available, you will see it announced on the display and hear a double beep.

• Press

• Press

to dial.

to turn off call completion for this call.

46

D765 | snom 760 User Manual

Using the Phone

Number guessing (auto completion)

Note: The default setting for Number guessing is "off". To be able to use it, open the

phone's web interface to Advanced > Behavior > Phone Behavior, change the setting to "on", and enter the minimum number of characters you must enter before number guessing will start.

When you dial and have typed the minimum number of digits, the phone will propose numbers containing the typed string from the numbers saved on its call lists and in the directory. When the desired number is on the display, press to dial.

In the following example, the minimum number of characters is four:

A

ccepting calls

Using different audio devices

Handset: Pick up the handset.

Headset: Press or the blinking line key. If Bluetooth headset, see also Appendix 6 on page 92.

Speakerphone: Press

.

Automatically accepting calls

The default is "off". Turning the function on: On the phone's web interface > Configuration Identity #

> SIP tab > Auto answer: Click on the radio button "On".

With this setting, your phone will automatically accept incoming calls when the phone is idle:

• If your are using Firmware version 8.7.2 and higher, calls will be accepted on speakerphone; press the headset key if you want them to go to the headset.

• Firmware version 8.7.1 and lower: Open the phone's web interface to the page Preferences >

Auto Answer > Type of Answering and select "Handsfree" (speakerphone) or "Headset" from the drop-down menu.

If you want to be alerted acoustically by a single long beep, whenever the phone accepts an incoming call, you need to change another default setting on the phones's web interface from "Off" to "On":

Preferences > Auto Answer > Auto Answer Indication.

47

D765 | snom 760 User Manual

Using the Phone

Call pick-up from another extension

You can pick up calls ringing on another extension, for example when the other extension is busy or when the user is absent. The prerequisites for this function are:

◦ It must be supported by the PBX.

◦ The extension whose calls you wish to pick up on your own extension must permit this function and you must both be using the same ID for this function. Settings:

- Phone's web interface > Configuration Identity > SIP > Allow incoming extension monitoring: "on"

- Phone's web interface > Configuration Identity > SIP > Extension monitoring group ID:

Enter the ID into the textfield. Please note: The first character of the ID must not be a '{' bracket.

◦ The extension to be monitored must be programmed onto one of the freely programmable

function keys with LEDs. See chapter "Configuring the function keys", "Example 1, Extension monitoring and call pick-up" on page 60.

When these prerequisites are met, the activities of the monitored extension are indicated by the LED of the function key:

◦ Blinking LED: Incoming call ringing. If the call is not answered, press the key to pick it up.

◦ LED glowing steadily: The monitored extension is busy (in call, dialing, etc.).

If you wish to know who is calling or in a call with the monitored extensions, you can program the

function "Monitor Calls" onto one of the programmable function keys (see "Configuring the function

keys", "Example 2, Monitoring calls on-screen" on page 61).

◦ When the LED of a monitored extension is blinking, press to show call details on the screen. For example: 153 > 157 indicates that extension 153 is calling extension 157; 153 x

157 indicates that 153 is connected to 157 and that 153 is the caller, 157 the callee.

Monitored extension ringing Monitored extension busy

◦ When a call is ringing on the extension, press to pick it up on your phone.

◦ Press to close the details screen and return to the idle screen.

48

D765 | snom 760 User Manual

Using the Phone

Call waiting

When you are in a call, another call coming in will be announced visually by the symbol of a phone ringing and acoustically by the sound of a double beep; you will also see caller ID on-screen if it is being transmitted. If you wish to switch to visual or acoustic announcement only or turn call waiting off

completely, see "Call waiting" on page 72.

Fig. 1 Fig. 2 Fig. 3 Fig. 4

Note: In FW versions 8.7.3.15 and higher, 8.7.4.5 and higher, 8.7.5.1 and higher (please

check which branch applies to your phone), waiting calls are announced visually by the

symbol in the function key line (Fig. 5).

Fig. 5 Fig. 6

To accept or reject the waiting call, you must first open the Call waiting screen (Fig. 6) by pressing the function key underneath . Continue as described below.

When a call is waiting (Fig. 1 or 5, respectively), you have the following options:

• Press to accept the second call and put your current call on hold.

• Press to switch to the screen showing your current connection (Fig. 2). The symbol has been added to the function key line.

◦ Press to end the current connection and connect to the waiting call.

◦ Press to switch back to the call-waiting screen.

◦ If there is more than one call waiting (Fig. 3 and 4), press to view the previous one.

to view the next one, press

• If you do not wish to accept the waiting call, you can:

◦ ignore the announcement. If you have set call forwarding when busy, the call will be transferred to that phone.

◦ reject the incoming call by pressing . The caller hears the busy signal. Pressing for three seconds will also put the caller on the Deny list of the phone's directory. Future calls from this number will not ring on the phone; the caller hears the busy signal.

49

D765 | snom 760 User Manual

A

ctive calls

Hold

One call on hold

Press to put the ongoing call on hold. Held calls are indicated threefold:

◦ By the text on the display.

Using the Phone

◦ By the slowly blinking line key (green LED).

◦ By the glowing call indication LED (red LEDs).

You can now:

◦ transfer the held call blindly or with prior announcement - see "Transferring calls" on page 53.

◦ receive and make calls and put other calls on hold.

Pick up the held call by pressing its line key or by pressing again. If the other party hangs up while on hold the call terminates on your phone as well, and the indicators are turned off.

Holding multiple calls

If you are in a call with one party and have one or more calls on hold or if there is more than one call on hold, you can switch back and forth between the active call and any call on hold, transfer calls, etc. The info bar and the status line will tell you how many total calls there are and which one you are connected to. Your input on the phone's keys will affect the call on-screen at the time, i.e., the call shown in the contact area of the display. Up to 12 simultaneous calls are possible.

Figures H-1 to H-3 show the phone connected to one call with two calls on hold; Figures H-4 to H-6 show the phone with three calls on hold and no connected call.

Fig. H-1 Fig. H-2

50

Fig. H-3

D765 | snom 760 User Manual

Using the Phone

Fig. H-4 Fig. H-5 Fig. H-6

• Figures H-1 to H-3:

◦ In Fig. H-1 the connected call is on-screen. Press to put the first held call on the screen.

◦ In Fig. H-2 the first held call of a total of two (1/2) is on the screen. Press again to put the second held call (2/2) on the screen (Fig. H-3). If there are more held calls, continue likewise.

◦ Press to scroll back through the held calls (Fig. H-2 and H-3).

◦ When a held call is on-screen, press on hold.

to connect to it and put the current connected call

• Figures H-4 to H-6:

◦ In Fig. H-4 the first held call of a total of three Calls on Hold (1/3) is on-screen. Press put the second held call on the screen.

to

◦ In Fig. H-5 the second held call (2/3) is on the screen. Press again to put the third held call (3/3) on the screen (Fig. H-6). If there are more held calls, continue likewise.

◦ Press to scroll back through the held calls (Fig. H-6 and H-5).

◦ To connect to the held call currently on-screen, press .

• When the connected call is on-screen, you can terminate it by pressing .

• You can transfer the on-screen call, whether connected or held. See Call Transfer for more information.

Conference

The maximum number of participants is three.

Initiating a conference

1. Call the first intended participants and put him or her on hold.

2. Call the next intended participant.

Note: You do not need to put the last participant on hold before starting the conference.

3. Press to start the conference.

51

D765 | snom 760 User Manual

Using the Phone

Conference screen navigation

Your input on the phone's keys will affect the caller/callee(s) shown in the contact area of the display.

Example: A conference with four participants, including yourself. After you have pressed

to start the conference, the phone numbers of the other three participants are shown on-screen (Fig.

C-1).

Fig. C-1 Fig. C-2 Fig. C-3 Fig. C-4

• Selecting individual participants:

◦ With all participants on-screen (Fig. C-1), press

(Fig. C-2); press reached the last participant (Fig. C-4).

to put the first participant on-screen

again to put the next participant on-screen (Fig. C-3), until you have

◦ Scroll back through the participants by pressing .

• Bringing the entire conference back on-screen: Scroll to the first participant's screen (Fig. C-2), then press .

Speaking to one participant in private

1. Put the participant on-screen, as shown in Conference screen navigation, above.

2. Press to put the other participants on hold and talk in private to the participant whose number is shown on the display.

3. To return to the conference, press and .

Putting one participant on hold

1. Put the participant on-screen, as shown in Conference screen navigation, above.

2. Press

3. Press

.

to return held participant to conference.

Dropping a participant

1. Put the participant on-screen, as shown in Conference screen navigation, above..

2. Press to terminate the connection to this participant.

Adding a participant

• Adding an incoming call:

1. Press or the blinking line key to accept the call. The conference is put on hold.

52

D765 | snom 760 User Manual

Using the Phone

2. Press to restart the conference with the additional participant.

• Calling a new participant:

1. Press to put the conference on hold.

2. Dial the number of the new participant.

3. With the new participant on the line, press .

Putting the conference on hold

• If one of the participants is on-screen (Figures C-2, C-3, C-4), you must first return to the screen with all participants. See Conference screen navigation.

• With all participants on-screen (Fig. C-1), press . Technically, you are ending the conference; you will see the "Calls on Hold" screen (see Holding multiple calls, Fig. H-4).

• To restart the conference, press .

Terminating the conference

1. Press to put all participants on hold.

2. Select each participant in turn and press .

Transferring calls

You can transfer connected calls as well as calls ringing on your phone.

• When you have a call on the line, there are two ways to transfer it to a third party:

◦ Announcing the call to the third party first, to make sure the call is welcome and will be accepted: Attended transfer;

◦ Transferring the call unannounced: Blind transfer. There will be no feedback on whether the third party is available and/or picking up the call.

• When a call is ringing on your phone, you can transfer it to a third party without answering it first

(blind transfer only).

Attended transfer

1. Put the call on hold.

2. Dial the number you wish to transfer the call to and announce the call.

3. If the third party wishes to accept the call, press and .

Blind transfer

1. With a call ringing or on the line, press .

2. Dial the number of third party you intend to transfer the call to.

3. Press .

53

D765 | snom 760 User Manual

Using the Phone

Call waiting

When you are in a call, another call coming in will be announced visually by the symbol of a phone

ringing and acoustically by the sound of a double beep. For more information, see "Call waiting" on page 49

.

T

erminating calls

• When using the handset: Place the handset in the cradle or press .

• When using speakerphone or a headset: Press .

M

issed Calls

Missed calls are indicated by the text "Missed:" followed by the number of missed calls in the status line and/or on the Status info screen.

• Press the cancel key to delete the text "Missed:" and the number of missed calls in the status line.

• Press to open Status info screen. Press selected call.

to view the calls, press to delete the

C

all lists

1. Press to open Call history.

2. To view the list of missed, received, or dialed calls, press its number.

3. Scroll through the list with / .

◦ Press to dial the number of the selected call.

◦ Press

◦ Press

to delete the selected call.

to delete the entire list.

◦ Press

to show the call details of the selected call. From the Details screen, press

to add the phone number to your phone's directory. See "Editing existing entry" on page

39 for information on adding a name and other data to the new directory entry.

R

ejecting or redirecting incoming calls

This includes manual and automatic rejection and redirection and rejection of anonymous calls.

Manually

If you do not wish to pick up a ringing call, you can take one of the following actions:

• Let it ring.

54

D765 | snom 760 User Manual

Using the Phone

• Reject it.

◦ Press . The caller will hear a busy signal.

◦ Pressing for two seconds will also place the caller on the Deny list of the phone's directory so that calls from that number will not ring on your phone; the caller will always hear the busy signal.

Open the phone's web interface > Directory to edit the entry, to save it permanently, or to delete it from the Deny List.

• Do a blind transfer to another phone.

1. Press .

2. Enter the number you wish to transfer the incoming call to.

3. Press to complete the transfer. The incoming call will continue ringing at that number.

Automatically

There are three options for rejecting incoming calls automatically or automatically or to have them forwarded automatically, either always or under certain conditions:

• Deny List. Calls from phone numbers on this list will not ring on your phone; callers will hear the busy signal. For further information on placing phone numbers on the Deny List, see Directory.

• DND - do not disturb mode. All incoming calls will be forwarded to the number set in call forwarding when busy; if there is no setting for call forwarding, callers will hear the busy signal.

Exception: Phone numbers designated VIP in your phone's directory will ring on your phone even

when DND is on.

1. Press

2. Press

to activate DND.

again to deactive DND.

• Call forwarding. For further information, see "Call forwarding" on page 56 and 70.

Rejecting anonymous calls

With this setting you can make your phone reject calls from phones that are blocking or not transmitting their numbers.

Please note: Calls from analog phone connections without caller ID will, most likely, be

received as anonymous calls. They will be rejected if you turn this function on.

Activating rejection of anonymous calls:

1. Press .

2. Press 2 Call Features.

3. Press 3 Incoming Calls.

4. Press 1 to change setting "1 Reject anonymous" from [No] to [Yes].

5. Press for two seconds to return to the idle screen.

55

D765 | snom 760 User Manual

Using the Phone

Deactivating rejection of anonymous calls:

1. Press .

2. Press 2 Call Features.

3. Press 3 Incoming Calls.

4. Press 1 to change setting "1 Reject anonymous" from [Yes] to [No].

5. Press for two seconds to return to the idle screen.

C

all forwarding

The phone can be set to forward incoming calls, either always or under certain conditions. The settings can be done on the phone and on the web interface. For further information on using the web interface

for these settings, see "Call forwarding" on page 70.

Forward All: Forwarding all incoming calls to the number of the phone, extension, or mailbox

specified as this function’s target.

As the default setting, the function key in the function key line turns forwarding of all calls on and off, but you can also map the function onto another function key or use the settings menu as shown in the table, below.

Forward when Busy: Forwarding calls ringing while phone is busy to the number of the phone,

extension, or mailbox specified as this function’s target.

Forward after Timeout: When a call starts ringing, the phone will wait for the number of seconds

specified in the setting "Call forwarding time". If the call is not accepted by the end of this time period, it is forwarded to the number of the phone, extension, or mailbox specified as this function’s target.

Making/changing the settings on the phone and turning on call forwarding

Press

Forward all

Press

ABC

2

2 Call Features

Press

1

1 Call Forwarding

Press

1

1 Forward All

Press

ABC

2

2 Target when forwarding

Type phone number

Press

Press

Type

Press

Press

1

1 Enable forwarding [No]

Forward when busy

ABC

2

2 Call Features

ABC

1

1 Call Forwarding

2

2 Forward when Busy

ABC

2

2 Target when forwarding phone number

1

1 Enable forwarding [No]

Forward after timeout

ABC

2

2 Call Features

DEF

1

1 Call Forwarding

3

3 Forward after Timeout

ABC

2

2 Target when forwarding phone number

DEF

3

3 Call Forwarding time number of seconds

1

1 Enable forwarding [No]

56

D765 | snom 760 User Manual

Using the Phone

The setting will change to "1 Enable forwarding [Yes]", indicating that call forwarding is now active.

Press for two seconds to return to the idle screen.

The status line and the status info screen will indicate that call forwarding is turned on and what number calls will be forwarded to.

Note: Forwarding when busy and after timeout are indicated in the status line, which can

display only one message at a time. When both are active at the same time, only "Forward when busy" will be displayed. If there are other status messages with a higher priority than "Forward when Busy" (e.g., firmware update available, reboot required, waiting for call completion, etc.), they will take precedence over the call forwarding indication.

Press to show status info with all current status messages, including call forwarding.

Forwarding all calls:

Forwarding when busy or after timeout:

Press

"i":

Turning on forwarding of all calls with a programmable function key

If the function key is not available when the display is in idle mode, you can make it available on

the Function Keys page of the phone's web interface. For further information see "Configuring the function keys" on page 58 .

1. Press . The display will show the "Target when Forwarding" screen.

2. If no forwarding number has been set or if it needs to be changed, make the necessary entries.

3. Press .

Turning off forwarding of all calls: Press

.

Turning off call forwarding

Press

Forward all

Press

ABC

2

2 Call Features

Press

1

1 Call Forwarding

Press

1

1 Forward All

Press

1

1 Enable forwarding [Yes]

Forward when busy

ABC

ABC

2

2 Call Features

1

1 Call Forwarding

2

2 Forward when Busy

1

1 Enable forwarding [Yes]

Forward after timeout

ABC

DEF

2

2 Call Features

1

1 Call Forwarding

3

3 Forward after Timeout

1

1 Enable forwarding [Yes]

The menu item changes to "1 Enable forwarding [No]". Press for two seconds to return to the idle screen.

Turning off forwarding of all calls with the programmable function key: Press

.

57

D765 | snom 760 User Manual

Configuring the Function Keys

C

onfiguring the function keys

See "Opening the web interface" on page 32 on how to open the phone’s web interface, for an

explanation of administrator and user mode. See "How the web interface works" on page 33 on the

mechanics of navigating in the windows and changing the settings.

Any changes you make will not take effect until you press "Apply" and "Save". Changes will be lost if you open another page of the web interface without first pressing "Apply"/"Save".

F

unction keys on snom phones

Every phone has a limited number of hard keys. Phone users, however, have a myriad of different priorities and preferences when asked which functions they use most often and which functionalities they would like to access quickly. snom has therefore designed the function keys to be programmable, even the preprogrammed "hard keys" whose default function is printed on the casing.

There are four types of programmable function keys: See the illustration in "At a glance" on page 19.

• Freely programmable function keys with LEDs (P1 - P16). All available functionalities, including key events, can be programmed onto them.

Context

This setting specifies which configured identity will be used when executing the functionality of the key. You may want to use this feature when you are have accounts with different providers or when you wish to present different identities to certain destinations.

For example: If you have programmed key P16 to speed dial a specific number and you want to use configured identity 2 to call that number, select configured identity 2 from the drop-down menu of P16's "Context". When you speed dial the number by pressing key P16, identity 2 will be used as the outgoing identity.

The default setting is "Active", which means that the identity selected as the phone's outgoing identity at any given time will be used.

Type

Select the type of functionality from the drop-down list. See appendix for more information. If you select "Key Event", a drop-down list with the available key events will replace the text field under "Number". The default setting is "line".

Number

Enter one phone number or value for the function or, if the function is key event, select an event from the drop-down list. Enter phone numbers exactly the way they need to be dialed, i.e, type the number without spaces or punctuation marks between the digits. For example, a number with an area code that might conventionally be notated as (916) 555-1234 should be entered as 9165551234.

Short Text

This entry is optional. It can be used to enter the name associated with the phone number or other descriptive text.

58

D765 | snom 760 User Manual

Configuring the Function Keys

• Context-sensitive, programmable function keys. For the default settings , see "At a glance" on page 19. You can select a different key event to be available on each respective key when the phone

is in idle mode.

You cannot change the functions that are available when the phone is active, for example when you are in a call, when the phone is ringing, etc. Depending on the activity, different functions will be available.

See "Appendix 1 - Display Symbols" on page 79 for the lists of symbols and their description.

• Navigation, confirmation, and cancel keys. For the default settings, see "At a glance" on page 19.

You can select a different key event to be available on each respective key when the phone is in idle mode.

You cannot change the functions that are available when the phone is active, for example when you are in a call, when the phone is ringing, etc.

• Dedicated, customizable function keys. The default setting is the respective key event printed onto the casing. Other key events and a selected number of other functionalities can be programmed onto them.

P

rogramming the function keys

This chapter will show you a few examples for customizing function key settings to your needs and preferences:

• First example: Extension monitoring and call pickup via a freely programmable function key with

LED

• Second example: Monitoring calls on-screen

• Third example: Speed dialing with a freely programmable function key with LED

• Fourth example: Turning forwarding of all calls on and off with a context-sensitive, programmable function key

59

D765 | snom 760 User Manual

Configuring the Function Keys

Example 1, Extension monitoring and call pick-up

This feature makes it possible to pick up a call ringing on another extension, for example when the other extension is busy or when the user is absent. The prerequisites for this function are:

◦ It must be supported by the PBX.

◦ The extension whose calls you wish to pick up on your own extension must permit this function and you must both be using the same ID for this function. Settings:

- Phone's web interface > Configuration Identity > SIP > Allow incoming extension monitoring: "on"

- Phone's web interface > Configuration Identity > SIP > Extension monitoring group ID:

Enter the ID into the textfield. Please note: The first character of the ID must not be a '{' bracket.

◦ The extension to be monitored must be programmed onto one of the freely programmable function keys with LEDs. In our example we are monitoring the number of the Sales Hotline on key P5.

1. On the phone's web interface, click on "Function Keys" in the menu on the left.

2. Under "Context" of P5, select Active or one of the configured identities from the drop-down list.

3. Under "Type" of P5, select "Extension" from the drop-down list.

4. Under "Number" of P5, enter the phone number whose calls you wish to pick up. In our example it is 157.

5. Under "Short Text" of P5, enter "Sales Hotline" in the text field (optional, but helpful).

6. Click on "Apply" and "Save".

The LED of key P5 on the phone will now flash red quickly when a call is ringing on 157. If the call is not answered, you can pick it up by pressing key P5. When 157 is engaged in a call the key will glow red steadily.

P5

i

P4

60

D765 | snom 760 User Manual

Configuring the Function Keys

Example 2, Monitoring calls on-screen

When you are monitoring another extension or phone line, you may want to see more information on the display, for example the number of an incoming call to that extension or line. In our example, key P4 will be programmed to show ongoing activity on monitored extensions or lines on the display.

1. On the phone's web interface, click on "Function Keys" in the menu on the left.

2. Under "Context" of P4, select Active or one of the configured identities from the drop-down list.

3. Under "Type" of P4, select "Key Event" from the drop-down list.

4. Under "Number" of P4, select "Monitor Calls" from the drop-down list.

5. Click on "Apply" and "Save".

P4

i

P5

Press key P4 on the phone to show any ongoing activity on monitored extensions or lines on the display. For example: "156 > 157" indicates that extension 156 is calling extension 157; "156 x 157" indicates that 156 is connected to 157 and that 156 is the caller, 157 the callee.

Monitored extension ringing Monitored extension busy

61

D765 | snom 760 User Manual

Configuring the Function Keys

Example 3, Speed dialing

Besides using the "Speed Dial" page on the web interface to program speed dial numbers, you can also put the functionality on the freely programmable function keys with LEDs. In our example, key P6 will be used.

1. On the phone's web interface, click on "Function Keys" in the menu on the left.

2. Under "Context" of P6, select Active or one of the configured identities from the drop-down list.

3. Under "Type" of P6, select "Speed Dial" from the drop-down list.

4. Under "Number" of P6, enter the phone number that you wish to speed dial. In our example it is phone number 555-1784 in area code 917. Type each phone number with any necessary area code and/or country code etc. without spaces, hyphens, etc.

Example: In conventional notation you might write the number as (917) 555-1784. Type

9175551784 into the text field.

5. Under "Short Text" of P6, enter the name associated with the phone number or other descriptive text (optional, but helpful).

6. Click on "Apply" and "Save".

You can now speed dial the number 9175551784 by pressing key P6 on the phone.

62

D765 | snom 760 User Manual

Configuring the Function Keys

Example 4, Turning forwarding of all calls on and off

The functionality "Forward all" redirects all incoming calls to another phone or a mailbox. It is possible to configure the settings on the phone and on the web interface. If you need to turn this function on and off frequently and/or regularly, you may want to be able to do so with the touch of just one key instead of going through the menu every time.

1. On the phone's web interface, click on "Function Keys" in the menu on the left.

2. Click on the drop-down list of one of the context-sensitive, programmable function keys. In our example, it is the second key from the right.

3. Select "Forward all" from the drop-down list.

4. Click on "Apply" and "Save".

Using the configured context-sensitive function key on the phone to turn forwarding of all calls on and off:

1. Press the key (Fig. 1).

2. The display will prompt you to enter a forwarding target (Fig. 2). If one has already been set, the display will propose that number; you can accept it with or change it and then press .

Forwarding of all calls is now activated (Fig. 3)

3. To turn off forwarding of all calls, press the key again (Fig. 3).

Fig. 1 Fig. 2

63

Fig. 3

D765 | snom 760 User Manual

Customizing the Phone Settings

C

ustomizing the phone settings

See "The phone's web interface" on page 31 on how to open the phone’s web interface, how the web

interface works, and how to change the settings. See "User mode/administrator mode" on page 34 on

the difference between administrator and user mode.

If you have access to administrator mode, but do not consider yourself to be an expert on SIP and SIP phones, we recommend that you do not change any of the technical settings since this may adversely affect the phone’s performance or put it out of order altogether.

If you want more information on a web interface setting, click on the radio button with the question mark that you see to the right of each item. It links to a page on snom’s Wiki with detailed information about that particular item.

On customizing the function key settings, see the chapter "Configuring the function keys" on page 58.

Note: Any changes you make on the web interface will not take effect until you click on

"Apply" and "Save". Changes will be lost if you open another page or tab of the web interface or if you close the web interface without first clicking on "Apply" and "Save".

I

dentities/accounts

The phone supports up to twelve accounts or "phone numbers" with one or more providers or within an office or organization network. On snom phones these accounts or phone numbers are called

"identities".

If your phone is part of an office network, you may need to contact your administrator to configure new or change existing identities, as this can only be done when the phone is running in administrator mode and when the PBX settings allow it.

See "Phone Installation and initialization" on page 8 for the information on required input data.

Configuring new identity/account

On the phone

You can do the basic setup (account/number & registrar):

1. Press > 3 Identity > 3 Edit User.

2. Press to scroll down.

◦ When you are at the top of the list, pressing will take you to identity 12.

◦ At any other position within the list, press to scroll.

3. When you have reached the identity you wish to edit, press to select it.

4. When prompted, enter Account and Registrar.

5. Press .

64

D765 | snom 760 User Manual

Customizing the Phone Settings

On the web interface

Open the web interface and click on an identity in the menu on the left. The configuration window for that identity will open; it contains four tabs, with the left one, Login, visible in the front. To view SIP,

NAT, and RTP pages, click on the respective tab; the font weight of the tab on the active page is bold.

1. Login tab. Enter the information received from your provider or your administrator in the appropriate fields.

◦ Display name

The display name is optional and freely selectable. It will be sent to any parties you call unless

you hide your identity (see "Hiding my caller ID" on page 73). If you do not enter a display name,

the data in the "Account" text field will be shown on your display and sent to any parties you call unless you hide your identity.

◦ Display text for idle screen

Any text you enter in in this text field will be shown - instead of your display name or account - on your display only. It will not be sent to any parties you call.

◦ Ringtones

The phone has 10 built-in ringtones that can be assigned to identities, group types, and contact types. It is also possible to download a custom melody and to turn off the ringer by selecting

"Silent".

See "Assigning ringtones" on page 66.

2. SIP settings. Click on the SIP tab to bring the page to the front. It contains a number of technical settings and textfields for entering URIs/URLs to various servers (for music-on-hold, for example), as well as some behavior settings. These are:

◦ Automatic acceptance of incoming calls: Identity # > SIP tab > Auto Answer. The default setting is "off".

Acoustic alert (one short beep) when the phone accepts a call automatically: Preferences >

Auto Answer > Auto Answer Indication. The default setting is "off".

◦ Contact List. A contact list must be available on a server. Click "on" and enter the Contact List

URI .

◦ Identity can receive calls. The default setting is "on". The default setting is "on". If you want to be able to use the identity for outgoing calls but do not wish other phones to be able to call the identity, turn the setting off.

◦ Allow incoming extension monitoring. If you do not wish other phones to be able to monitor the activity on your phone, turn the setting off.

You can also allow only certain phones to monitor and pick up your calls. In this case, select the "On" setting and enter a password into the next field of the next setting, "Extension monitoring group ID" .

Note: The password cannot start with a "{" bracket.

Any phone allowed to monitor and pick up your calls must also use the same password in this text field..

65

D765 | snom 760 User Manual

Customizing the Phone Settings

Editing an existing identity/account

On the phone

You can edit the account/number and the registrar only:

1. Press > 3 Identity > 3 Edit User.

2. Press to scroll down.

◦ When you are at the top of the list, pressing on the navigation key will take you to identity 12.

◦ At any other position within the list, press to scroll.

3. Press to open the selected identity.

4. When prompted, enter Account and Registrar.

5. Press .

On the web interface

Open the Configuration page of the identity and make the changes in the text fields. For more

information, see "Identities/accounts" on page 64.

If you have changed the account or the registrar, click on "Re-Register" and "Save". If you have made other changes, clicking on "Apply" and "Save" suffices.

A

ssigning ringtones

The phone has 10 built-in ringtones that can be assigned to identities, group types, and contact types.

It is also possible to download a custom melody. When an incoming call to an identity is ringing, the phone will play the ringtone assigned to that identity, unless it is a call from a VIP or a group with a distinctive ringer of their own.

Note: Ringers assigned to the contact type VIP and to any of the group types override

the ringers assigned to identities. For example, if you have assigned Ringer 1 to one of the identities and Ringer 2 to the group "Colleagues", the phone will play Ringer 2 when a contact from the "Colleagues" group calls that identity.

If your ringtones don’t seem to work as expected, contact your administrator. There may be an overriding setting on the PBX.

Assigning ringtones to contact type VIP and group types: See page 37.

Selecting identity ringtones:

• On the phone: 1 Preferences > 3 Ringer. The identities are shown on the display.

◦ Select an identity with / and press to hear the current ringtone for that identity.

◦ Selecting a different ringtone: Press / to navigate up and down the list. The marked ringtone is played. Press to save the marked ringtone as the new ringtone for the currently selected identity and return to the identity screen.

66

D765 | snom 760 User Manual

Customizing the Phone Settings

• On the web interface (the ringtones will be played by the phone): Configuration Identity (1-12) >

Login.

◦ Click on "Play Ringer" to play the currently selected ringer.

◦ To change the ringer, select a ringer from 1 to 10 in the drop-down menu of "Ringtone". If you have selected the custom melody, enter the URL to the data file in the text field underneath. It must be a file of the type PCM 8 kHz 16 bit/sample (linear) mono WAV.

◦ Click on "Apply" and "Save".

D

ate and time formats

The date and time formats can be set and changed on the web interface only.

Date

1. Open Preferences > General Information > US Date Format. The default is "on".

◦ Select "on" to have the date shown on the phone's display in "m/d/yyyy" or "mm/dd/yyyy" format. Examples: May 6 will be displayed as 5/6; December 10 will be displayed as 12/10.

◦ Select "off" to have the date shown on the phone's display in "d.m.yyyy" or "dd.mm.yyyy" format.

Examples: May 6 will be displayed as 6.5; December 10 will be displayed as 10.12.

Date

March 5, 2012

March 12, 2012

December 5, 2011

December 10, 2011

Setting "On"

US Date Format

Setting "Off"

3/5/2012

3/12/2012

12/5/2011

12/10/2011

5.3.2012

12.3.2012

5.12.2011

10.12.2011

2. Click on "Apply" and "Save".

Time

The time setting affects phones and/or firmware versions with a digital clock only. If the phone has a clock face, changing the setting will not affect it.

1. Open Preferences > General Information > 24 Hour Clock. The default is "on".

◦ Select "on" to have the time on the phone's display shown in 24-hour format, 00:01 to 24:00 .

◦ Select "off" to have the time on the phone's display shown in AM/PM format, 0:01AM to

12:00PM.

2. Click on "Apply" and "Save".

67

D765 | snom 760 User Manual

Customizing the Phone Settings

T

ime zone

The phone receives the time and date from your NTP time server. If the time and/or date on the display are incorrect, you may need to set the correct time zone. If you have set the correct time zone and the time is still incorrect, there may be a problem with the time server. Contact your network administrator or your IP provider.

The list of time zones is arranged by the difference in hours (+/-) to the UTC and, within each time zone, alphabetically by selected locations (country or country and city). Selecting and setting the time zone:

On the phone

1. Press

◦ Press spoken.

> 1 Preferences > 1 Time Zone.

to collapse the list to show only selected times zones where the phone language is

◦ Press to show all time zones.

◦ Press to fast-forward to the beginning of the next time zone, i.e., UTC +1, +2, etc.

◦ Use to scroll.

2. Press to save your selection

3. Press for two seconds to return to the idle screen.

On the web interface

This setting can be accessed in administrator mode only.

1. Open Advanced > Network tab > Time > Timezone.

2. Select your timezone/country/city from the drop-down list.

3. Click on "Apply" and "Save".

E

mergency numbers

These numbers can be called even when the keyboard is locked. The numbers "911", "112", "110", and "999" are preset.

Change/add numbers: Web interface > Preferences > Lock Keyboard > Emergency Numbers

(space separated). Type each number without spaces, hyphens, etc. between the digits, separate the individual numbers with one empty space between them. Example: 911 112 110 999.

68

D765 | snom 760 User Manual

Customizing the Phone Settings

L

anguage settings of phone and web interface

The language used on the phone can be changed on the phone as well as on the web interface. The language used on the web interface can be changed on the web interface only.

Phone language

Setting on the phone

1. Press > 1 Preferences > 4 Language.

2. Use to scroll.

3. Press to save the selected language.

4. Press for two seconds to return to the idle screen.

Setting on the web interface

1. Open Preferences > General Information > Language.

2. Select the language from the drop-down list.

3. Click on "Apply" and "Save".

Web interface language

1. Open Preferences > General Information > Webinterface language.

2. Select the language from the drop-down list.

3. Click on "Apply" and "Save".

D

ial tones

Different dial tones for different countries! Select yours on the phone or on the web interface.

Setting on the phone

1. Press > 1 Preferences > 2 Tone Scheme.

2. Use to scroll.

3. Press to save the selected country.

4. Press for two secondc to return to the idle screen.

Setting on the Web Interface

1. Open Preferences > General Information > Tone Scheme.

2. Select the country from the drop-down list.

3. Click on "Apply" and "Save".

69

D765 | snom 760 User Manual

Customizing the Phone Settings

E

mergency numbers

These are numbers that can be dialed even when the keyboard is locked. They must be set beforehand on the web interface.

1. Open Preferences > Lock Keyboard > Emergency Numbers (space separated).

2. Enter the emergency numbers in the text field. Type each number without spaces between the digits, separate the individual numbers with one empty space between them.

Example: If you want to set the emergency phone number 911 and the phone numbers of your doctor (986543) and a friend (234578), the entry would look this: 911 986543 234578.

3. Click on "Apply" and "Save".

C

all forwarding

This feature automatically redirects all or certain incoming calls to another phone or a mailbox. It is possible to configure the settings on the phone and on the web interface.

Always

All incoming calls are forwarded to the number of the phone, extension, or mailbox specified as this function’s target.

When busy

Calls ringing while the phone is busy are forwarded to the number of the phone, extension, or mailbox specified as this function’s target.

After timeout

When a call starts ringing, the phone will wait for the number of seconds specified as "call forwarding time". If the call has not been accepted by the end of this time period, it is forwarded to the number of the phone, extension, or mailbox specified as this function’s target.

Configurating the settings on the phone

See "Making/changing the settings on the phone and turning on call forwarding" on page 56.

Configurating the settings on the web interface

If your internet telephony provider or your PBX uses codes to turn functions on and off, refer to their manuals for the codes to enter in "On Code"/"Off Code" text fields or ask your administrator.

70

D765 | snom 760 User Manual

Customizing the Phone Settings

Setting forwarding numbers

• Forwarding all incoming calls:

1. Open Preferences > Call Forwarding > Always.

2. Type the phone number in the "Target" text field. Type each number the way it needs to be dialed by the phone, without spaces or punctuation between the digits.

3. Click on "Apply" and "Save".

• Forwarding incoming calls when the phone is busy:

1. Open Preferences > Call Forwarding > Busy

2. Type the phone number in the "Target" text field. Type each number the way it needs to be dialed by the phone, without spaces or punctuation between the digits.

3. Click on "Apply" and "Save".

• Forwarding incoming calls when they are not answered:

1. Open Preferences > Call Forwarding > Timeout.

2. Type the phone number in the "Target" text field. Type each number the way it needs to be dialed by the phone, without spaces or punctuation between the digits.

3. Click on "Apply" and "Save".

Turning call forwarding on

1. Web interface > Preferences > Call Forwarding.

2. Click "On" after the forwarding event ("Always", "Busy", "Timeout").

3. Click on "Apply" and "Save".

Turning call forwarding off

1. Web interface > Preferences > Call Forwarding.

2. Click "Off" after the forwarding event ("Always", "Busy", "Timeout").

3. Click on "Apply" and "Save".

71

D765 | snom 760 User Manual

Customizing the Phone Settings

C

all completion

On snom phones call completion means that when a called number is busy or not available, your phone will call you back as soon as the dialed number is not busy anymore or available again. The factory default setting is "off".

Note: This function depends on whether it is available in your network or not.

Changing the setting to turn it on:

On the phone

> 2 Call Features > 2 Outgoing Calls > 3 Call Completion

Tap "On" button to save and return to previous screen.

On the web interface

Open the phone's web interface > Advanced > Behavior > Phone Behavior > Call completion > .

C

all waiting

When you are in a call, another call coming in will be announced visually by the symbol of a ringing phoneon the display and acoustically by the sound of a double beep; you will also see the caller`s ID on-screen if it is being transmitted. You can switch to visual or acoustic announcement only or turn call waiting off on the phone’s web interface.

The default setting is "on", which means that waiting calls are announced both acoustically and visually.

See "Call waiting" on page 49 on how to use this feature.

1. Open Advanced > Audio > Call Waiting Indication.

2. To turn call waiting off, select "off" from the drop-down menu. Select "visual only" or "ringer" if you want waiting calls announced only by the "phone ringing" symbol or the double beep, respectively.

3. Click on "Apply" and "Save".

72

D765 | snom 760 User Manual

Customizing the Phone Settings

H

iding my caller ID

With this setting your phone number will not be transmitted to any phones you call. Please note that your call may not be accepted if the other phone is set to reject anonymous calls (see next item).

1. Open Preferences > Privacy Settings > Suppress own number (CLIP/CLIR).

2. Select the radio button "Hide" .

3. Click on "Apply" and "Save".

R

ejecting anonymous calls

With this setting you will not receive calls from phones whose number is not shown on your display.

Anonymous callers will hear the busy signal.

Please note that calls from analog phone connections will, most likely, be received as anonymous calls.

1. Open Preferences > Privacy Settings > Reject incoming anonymous calls.

2. Select the radio button "Reject".

3. Click on "Apply" and "Save".

N

umber guessing

When you have typed the minimum number of characters you have specified for this function, the phone will look for numbers containing that string of characters in its call lists and directories and, if it finds matches, show the number(s) on the display. If the number proposed on the display is the one you wish to dial, press ; if not, continue entering digits.

The default setting is off. Changing the setting:

1. Open Advanced > Behavior tab > Phone Behavior > Number Guessing.

2. Select the radio button "on".

3. Type the minimum number of digits in the text field of "Number Guessing Minimum Length".

4. Click on "Apply" and "Save".

73

D765 | snom 760 User Manual

Customizing the Phone Settings

S

peed dial

You can use the numbers 0 to 30 and the special characters # and * to speed dial frequently and/or long numbers without having to enter the complete phone number. The numbers must be set on the phone's web interface first:

1. Open Setup > Speed Dial.

2. Enter one phone number with any required prefixes (area code, country code, operator/auto attendant, etc.) in the text field for each respective number or special character.

Note: Type each phone number without spaces or punctuation between the digits.

For example: You want to be able to speed dial the phone number 555-1784 in area code 917 by pressing the 1 key. In conventional notation you might write the number down as (917) 555-1784. In the speed dial table, type 9175551784 into the text field of the number 1.

If you want to add a name or other data before or after the number, type the number in angled brackets <>. Example: Accounting <9175551784>.

3. Click on "Apply" and "Save". You can now speed dial the number by pressing

1

and on the phone.

74

D765 | snom 760 User Manual

S

oftware update

Software Update

M

anual update

1. Open snom’s web page at www.snom.com.

2. Click on Support > Download > Firmware.

3. Click on the phone to be updated.

4. Click on the firmware version currently running on your phone.

5. Click on the firmware version you want to update to.

6. Right-click on the version’s link and copy it.

7. Open the phone’s web interface > Setup > Software Update.

8. In the Manual Software Update area, paste the link into the text field behind Firmware.

9. Click on Load. The phone begins to reboot.

10. If the phone asks “Reboot?”, press .

11. DO NOT DISCONNECT THE POWER WHILE THE PHONE IS REBOOTING!

A

uto provisioning

See our web page http://wiki.snom.com/Features/Mass_Deployment for information.

1. Open the phone’s web interface > Setup > Advanced > Update tab.

2. Please read the instructions at “?” of each line carefully.

75

D765 | snom 760 User Manual

T

roubleshooting

Troubleshooting

R

eboot

1. Press .

2. Press 5 Maintenance.

3. Press 3 Reboot.

4. When asked whether to "Reboot?", press .

5. Wait for the idle screen to reappear.

H

ard reboot

Disconnect the power, wait for a few seconds, and reconnect. Wait for the idle screen to reappear.

Warning: Never disconnect the power during a firmware update!

R

eset to factory values

1. Press .

2. Press 5 Maintenance.

3. Press 4 Reset values.

4. Enter the administrator password and press .

5. Wait for the idle screen to reappear.

6. See “Initialization” on page ... to continue.

Warning: All customized settings will be lost!

T

FTP Update

When there is no other way to get the phone to work (administrator password lost, etc.). How it is done: See http://wiki.snom.com/Firmware/Update/TFTP_Update/en.

Warning: All customized settings will be lost!

M

anual initialization

When automatic initialization via DHCP fails, enter the values for netmask, IP gateway, and DNS server manually after each prompt on the display.

76

D765 | snom 760 User Manual

Troubleshooting

C

ontacting snom Support

Please visit our knowledge base and our forum first. You may find the answer to your question in one of the topics there. If you haven't found an answer or a solution to your problem, please post your question or problem on the forum (http://forum.snom.com).

Note: The forum is accessible to the general public. Do not post any private and/or

security-relevant information there. This includes MAC addresses, SIP headers, etc. that may allow others to hack into your system or use your identity for nefarious purposes.

If you haven't received an answer or solution within a reasonable amount of time (generally two work days), send the link to your posting to Support. You need to create a support account first, if you don't already have one.

Creating a support account

1. Open snom’s web page at www.snom.com.

2. Click on the Support tab to open the Support window.

3. Click on End Customer Support.

4. On the Support Center page, click on Register new account. (Neu anmelden)

5. Fill out the form and click Register. (Anmelden)

6. You will receive an automatic email. Click on the link to activate your account.

7. You will receive a second email containing your account name, email address, and password.

You can now submit tickets requesting support to snom Support.

Submitting a ticket

1. Open snom’s web page at www.snom.com.

2. Click on the Support tab to open the Support window.

3. Click on End Customer Support.

4. On the Support Center page, enter your email address and password and click on Login.

5. Click on "Ask for support". (Eine neue Anfrage/Frage stellen)

6. Follow the instructions on the screen.

Submitting system and settings information

System information

1. Open the phone’s web interface > Status > System Information.

2. Copy the text under System Information into your forum posting or into the email, if Support has asked you to contact them by email.

Make sure to delete the MAC address and the IP address, if it is a public one.

77

D765 | snom 760 User Manual

Troubleshooting

Settings information

1. Open the phone’s web interface > Status > Settings.

2. Copy the settings list into your forum posting or into the email, if Support has asked you to contact them by email.

Make sure to delete private and/or security-relevant information like the MAC address,

public IP address, etc.

T

races

snom Support may ask you to submit a SIP Trace and/or a PCAP Trace to help them analyze your problem.

Performing a SIP Trace

1. Open the phone’s web interface > Status > SIP Trace.

2. Click on "Clear" to clear the page.

3. Recreate the error to be documented in the trace.

4. Click on "Reload".

5. Copy the text and submit to Support in whatever form they requested you to use.

Performing a PCAP Trace

1. Open the phone’s web interface > Status > PCAP Trace.

2. Click on "Start" to start recording network traffic.

3. Click on Stop to end recording.

4. Click on the “here” link to open the file download window and save the file.

5. Submit the file to Support in whatever way they requested you to use.

78

Appendix 1 - Display Symbols

D

isplay symbols and Icons

S

ymbols found in the function key line

The buttons symbolize the functions that are currently available for activation. Press the function key underneath the symbol to activate the function.

Programmable function symbols

These are the symbols displayed in the function key line when the phone is idle. They can be selected on the phone's web interface > Function Keys page. See for the default settings.

/

Displaying SIP URLs of all active identities; selecting outgoing identity

Call list menu (missed, received, and dialed calls)

Available status messages

Turning DND on and off

Contacts list

Forwarding all calls (turning on/turning off)

Presence signaling on/off

Retrieving messages from mailbox

Settings menu

Directory

Monitoring calls on other extensions (see Extension Monitoring). The button will only be displayed when there are ongoing calls.

IP address of phone and snom's web address

Redial (dialed calls)

Received calls

Missed calls

Favorites

LDAP Directory

Next outgoing ID

79

ABS

Previous outgoing ID

Address book search (OCS accounts only)

Context-sensitive symbols

These are the symbols displayed in the function key line when the phone is active, for example when a call is ringing, when you are dialing, etc.

Confirming a selection or an action

Terminating/canceling an action and return to the previous screen

Switching input mode to small letters

Switching input mode to capital letters

Switching input mode to numerals

Deleting the character to the left of the cursor

Moving down lists in various contexts

Moving up lists in various contexts

Available directories, contact lists, etc.

Sorting Directory entries

Editing mode for selected Directory entry

Moving the cursor to the left when entering/editing directory entries

Moving the cursor to the right when entering/editing directory entries

Deleting selected directory entry

Adding current caller's number to Directory

Details of missed calls (to, from, date/time, total number) and of received and dialled calls (to, from, date/time, duration)

Returning to call list

Deleting selected call list entry

Deleting entire call list

Moving to beginning of next time zone

Expanding the list of time zones to show all

80

Collapsing the list of time zones to show only time zones relevant to the language setting (i.e., countries where the language is spoken)

Last numbers dialed. Redial selected number

Selecting call on hold (show caller/callee on-screen)

Selecting call on hold (show caller/callee on-screen)

Establishing conference with all calls on hold

Show next conference participant on-screen

Show previous conference participant on-screen

Showing all current conference participants on-screen

Turning on the casing speaker

Turning off the casing speaker

Start recording the phone call or to record a message

Stop recording

When the phone is in a call, another incoming call waiting is shown on-screen. If you wish to to show the connected call on-screen instead, press this function key.

When the phone is in a call with more than one incoming call waiting, the latest arrival is shown on-screen. Press these keys to show other calls waiting on-screen.

On active screen (i.e., in call etc.): Monitoring calls on other extensions (see Extension

Monitoring). The button will only be displayed when there are ongoing calls. Press to show details of calls on monitored extensions.

Press to show available status messages like firmware update available, reboot required, call completion pending, call forward activated, etc.

D

isplay indications

On activity

Outgoing call ringing

Incoming call ringing

Connected (single connection or conference)

Call(s) on hold

81

On idle screen

Outgoing identity

• The current outgoing identity is indicated by the lighter line and the green box with the handset symbol: is your identity for the call.

. When you call someone, this

• Select a different identity for the next call by pressing on the navigation key.

Active identity

• Can be called

• Can be selected as the outgoing identity for making calls by pressing on the navigation key.

Identity not properly registered. See

Identity trying to register.

Identities can be unregistered without removing the registration settings by changing their status to "inactive" on the phone's web interface. Inactive identities are not displayed on the idle screen. They cannot be called or selected as the outgoing identity.

To reregister the identity, open the phone's web interface > Configuration Identity (1-

12).

1. Change the "Identity active" setting to "on".

2. Click on "Re-Register".

3. Click on "Save".

82

S

tatus messages

Whenever there is a current message concerning the status of the phone, the function key will be available. Press the function key (or > 6 Information > 1 Status Info) to open the "Status info" screen. Additionally, some status messages will also be displayed in the status bar; if there is more than one current message, the one with the highest priority will be shown. The messages in descending order of priority:

Status message

SW 1

Reboot required 1

SIP disabled 1,²

Error 1

Low memory 1

Remote directory is too big 1

Not Registered: <account> 1,²

Waiting for <name/number> to be available ²

<account> is now available ²

Forward when Busy: <name/number>

Forward after Timeout: <name/number>

Forward all: <name/number> ²

Contacting NTP server

NTP server unreachable 1

HTTP Password not set 1

Admin Password not set 1

Keyboard locked ²

DND active ²

You have messages

You have new messages

Old messages

Missed: <number>

Definition

A firmware update is available

Reboot required, for example to have settings changes take effect

The phone cannot make calls due to license problems

An error occurred

Disk space full

The remote directory is too big to be imported

The specified identity/account is not registered

Waiting for call completion to busy or currently unavailable number

The dialed number is not busy anymore or is now available

Call forwarding is on. When your phone is busy, incoming calls will be forwarded to the phone number indicated

Call forwarding is on. When an incoming call is not picked up within the set number of seconds, the call will be forwarded to the phone number indicated

Forwarding of all incoming calls is on. All incoming calls will be forwarded to the phone number indicated.

Network Time Protocol (NTP) is a protocol for synchronizing clocks over data network. If the connection is interrupted, the phone will not be able to display the correct time.

No HTTP password has been set

No Admin password has been set

Only numbers designated as emergency numbers can be dialled

Do not Disturb mode is activated

There are spoken messages on the mailbox

New (messages on the mailbox)

Old (messages on the mailbox)

The number of calls you missed since the last time you checked the list of missed calls or turned off the missed call indication

1 The function key symbol will be blinking

² The message cannot be deleted from the "Status Info" screen

83

Appendix 3 - Labeling Function Keys P5-P16

You will find an interactive PDF in snom's Wiki (http://wiki.snom.com/Snom760/Documentation) in the section "Function Key Label Template".

1. Open the file and click into the cell where you wish to enter a name or other text. Font size will adjust to the number of characters you enter into each cell. Use the tab to move the cursor into the next cell or click into another cell.

P11

P6 P7

P12 P13

P8

P14

P9

P15

P10

P16

P9

P15

P10

P16

Sales Hotline

Important Partner

P7 P8

P11 P12 P13 P14

2. Print the page in the actual size (100%).

3. Cut out each line individually.

Sales Hotline

Important Partner

P11

P7

P12 P13

P8

P14

P9

P15

P10

P16

4. Remove the transparent cover from the phone.

5. Slide the strip(s) into the slot(s) above the row(s) of function keys you wish to label and put the transparent cover back into place.

Sales Hotline

Important Partner

P11 P12

P7

P13

P8

P14

P9

P15

P10

P16

84

Appendix 4 - Wall Mounting

W

all Mounting

Not included in the delivery are the two screws (diameter of head between 6 and 9 mm, diameter of body max. 4.5 mm) and two screw anchors/molly bolts/wall plugs appropriate for your type of wall.

1. Anchor the screws in the wall, using the measurements given in Fig. 1 and Fig. 2.

2. Unscrew the slide guides for the footstand from the back of the phone (Fig. 3).

3. Plug the long end of the handset cord into the connector labelled " " on the back of the phone and place the cord in the cable guide (Fig. 4).

4. Hang the phone on the screws by placing the holes on the back of the phone over them (Fig. 5).

ø max: 9 mm

(0.354")

ø min: 6 mm

(0.236")

ø max

4,5 mm

(0.177")

Distance to wall

Abstand zur Wand

Distance au mur

Distanza dalla parete

Distancia a la pared

Distância à parede

4 mm (0.157")

Fig. 1 Fig. 2

Fig. 3

85

Fig. 4

Fig. 5

Appendix 5 - Programmable Functions

P

rogrammable Functions

Following is a brief description of the function key settings available on the "Function keys" page of the phone's web interface.

Action URL

Auto Answer

BLF

(Busy Lamp

Field)

Button

Call Agent

Conference

Server

Action URLs are basically HTTP GET Requests that allow the phone to interact with web server applications. They can be used to send various data from the phone to a web server, like the customized settings stored on the phone; passwords are replaced by empty strings. Action URLs can be triggered by predefined events

("Action URL Settings" page of the phone's web interface) or manually by a pressing a function key that has been programmed to trigger an action.

With this setting, your phone will automatically accept incoming calls when it is idle. If you leave the text field empty, incoming calls for all configured identities will be accepted; if you enter the number of an identity in the text field, only calls to that identity will be accepted automatically (i.e., 1 for Identity 1, 2 for Identity 2 etc.).

This function key allows showing the status (idle, ringing, held call, busy) of another extension on the key's LED. By pressing the key, it may also be possible to pick up calls ringing on the extension, to dial the extension when the phone is idle, and to transfer an incoming call ringing on your own extension. These functionalities depend on your PBX; for more information, please check snom's interoperability page and the PBX manual. With Asterisk, generally use this feature rather than extension.

This is a function key that is connected to your PBX to perform a task specified in the buttons document. For more information, see the detailed feature description at http://wiki.snom.com/Features/LED_Remote_Control.

This function key can be used by call agents to perform one of three different functions, depending on the value entered in the "Number" text field:

• Logging onto and off the system.

Text field entry: F_CALL_AGENT_LOGGEDIN.

• Signalìng readyness to accept calls. For this function to work, the agent must be logged in. Text field entry: F_CALL_AGENT_READY.

• Announcing that they are working after a call. For this function to work, the agent must be logged in.

Text field entry: F_CALL_AGENT_WORKINGAFTERCALL.

This function key can be used for PBX-based conferences and for local conferences on the phone itself.

• PBX-based conferences. When a conference room or conference account has been created on the server for an individual identity, you can dedicate a function key to calling and monitoring the conference room. Select the identity and the

"Conference server" function from the respective drop-down menus and enter the SIP URI of the conference room in the "Number" text field. For information on how to use this key with your particular PBX, please check the PBX manual.

• Phone-based conferences. If there is no SIP URI in the text field, pressing the function key will initiate a phone-based conference with all held calls and any active call.

86

DTMF

Extension

Forward to

Intercom

IVR

Appendix 5 - Programmable Functions

This funcion allows the specification of arbitrary key sequences (allowed digits: "0-

9", "*", "#", "A-D" and flash: "!") which will be sent via DTMF when this key is pressed during an active call.

This function key allows showing the status (idle, ringing, held call, busy) of another extension on the key's LED. By pressing the key, it may also be possible to pick up calls ringing on the extension, to dial the extension when the phone is idle, and to transfer an incoming call ringing on your own extension. These functionalities depend on your PBX; for more information, please check snom's interoperability page and the PBX manual. With Asterisk, generally use BLF rather than this function.

All incoming calls will be forwarded to the number (extension or external phone number) specified under "Number". The key is used to turn forwarding of all calls on and off; the red LED lights up when the function is turned on.

Pressing a function key mapped with "Intercom" will establish a two-way connection to the extension specified in the "Number" text field; that extension must have enabled intercom reception on its web interface (Advanced Settings > Behavior tab > Phone Behavior > Intercom Policy "only in idle" or "always").

"Intercom Policy" settings on the phone being called via intercom:

Always: The intercom call will connect to the called phone automatically; if the called phone is in a call, that call will be placed on hold.

Only in idle: The intercom call will connect to the called phone automatically if the called phone is idle. If it is in a call, the incoming intercom call will be announced as call waiting.

Off: Pressing the intercom key will call the extension specified in the "Number" text field where it will be treated like any other incoming call, i.e., ring, be forwarded, etc.

This function key can be used for regular calls to an extension that is reached via an

IVR or auto attendant and a number of voice prompts where the caller has to make a selection by pressing a key after or during the prompt. If you know which keys need to be pressed in which order in order to reach the desired extension, the entire process can be automated and considerably speeded up.

The syntax for the "Number" text field entry is <phone_number>;dtmf=<n>,<n>, etc. The angle brackets <>including their content are placeholders for the variables that you must replace by the actual characters. The comma represents a pause of one second, and n represents any number key on the alphanumeric keypad.

Example: The number to dial is (917) 555-3814. When the connection has been

established, the caller will hear three prompts. After the first prompt, he must press key 1; after the second prompt, he must press 3; and after the third prompt he must press 1 to reach the desired extension. The entry in the "Number" text field must look like this: 9175553814;dtmf=1,3,1.

Usage: When the phone is in idle mode, press the key to dial the number. As soon

as the connection has been established, the phone will automatically send the DTMF tones associated with the alphanumeric keys 1, 3, and 1 with a one-second pause between them.

(If the function type "IVR" doesn't work on individual phones, try "Speed dial" with the above description.)

87

Appendix 5 - Programmable Functions

Key Event

Line

Multicast Page

Park Orbit

Presence

Push2Talk

Shared Line

When this key type is selected, a drop-down menu opens under "Number". For the available selections, see the following section "Key Events".

Default setting for all freely programmable function keys. Incoming calls will go to the first free "line" key, and outgoing calls will use the first free line key.

Line keys can be used to make outgoing calls with the identity selected from a particular key's "Context" menu and to have incoming calls for that identity going to that particular function key. If the key is busy, the incoming call will go to the first free line key.

This function key enables the phone to send multicast streams to IP multicast group addresses. The multicast IP address and port are entered in the "Number" text field in the format <multicast IP address>:<port> (e.g., 239.255.255.245:5555). The angle brackets <>including their content are placeholders for the variables that you must replace by the actual characters.

Please note: This key is for sending multicast streams. To allow reception of

multicast streams, multicast support must be enabled on the phone's web interface,

Advanced settings > SIP/RTP tab > Multicast by setting Multicast Support to

"on". You must also enter the IP addresses of the multicasts you wish to receive in ascending order of priority, 10 being the highest. In case of simultaneous multicasts, the one with the highest priority at any given time will override the others.

If a park orbit has been set up on the server, a function key mapped with the Park

Orbit functionality can EITHER serve to park calls on the park orbit OR to park as well as retrieve calls, depending on the type of server used. Select the server type on the Configuration Identity page of the context identity, SIP tab, from the "Server

Type Support" drop-down menu. Enter the "phone number" of the Park Orbit and/ or the park position in the text field of "Number", for example [email protected] or

[email protected] etc.

If supported by your PBX, the LED of this function key will reflect the presence status (ringing, busy, available, etc.) of the extension specified in the "Number" text field. The function key can also be used to dial the extension, usually when the destination signals availability.

Pressing the function key mapped with "Push2Talk" will establish a two-way connection to the extension specified in the "Number" text field for as long as the key is pressed; that extension must have enabled intercom reception on its web interface

(Advanced Settings > Behavior tab > Phone Behavior > Intercom Policy "only in idle" or "always").

On 870 phones, this key type will establish an Intercom connection.

On 820/821 phones, this key type is only available on keys P2 and P3.

On 760 phones, this key type is not available on key P4.

Bridged lines (Bridged Line Appearance (BLA)) ared shared by two or more users; when one of them is using the line, the others are blocked from using it. This key type makes it possible to monitor whether a shared line is busy (the LED is lit) or not

(the LED is off). The URI of the shared line is set under "Number".

88

Appendix 5 - Programmable Functions

Speed Dial

Starcode

Transfer to

Besides using the "Speed Dial" page on the web interface to program speed dial numbers, you can also put the functionality on the freely programmable function keys with LEDs to be able to speed dial frequently used and/or long numbers without having to enter the complete phone number.

Enter one phone number with any required prefixes (area code, country code, operator/auto attendant, etc.) in the "Number" text field for any given freely programmable function key with LEDs. Example: 0019175557813.

Or enter a partial phone number (country, area code etc.) and complete the number on the dialog screen. In this case, enter the partial number, followed by a semicolon and "number=incomplete" in the text field. Example:

001917555; number=incomplete.

Making SIP calls without audiovisual indication on the phone user interface (PUI).

Examples for using this feature:

• Controlling settings on the PBX with dedicated keys that turn PBX functions on and off. The available functions must have been set on the PBX and they must be accessible from the phone, typically by dialing a star code. Phone function keys can be dedicated to activating and deactivating call forwarding and DND mode, transferring, picking up, and parking/unparking calls, etc. Depending on the settings on your PBX, you may either have to dedicate one key each for activating and deactivating a given function or to dedicate one key for both activating and deactivating the function.

• Silent alarms or emergency calls.

If the standard behavior of this function key type does not meet your requirements, it is possible to customize it. Copy the standard XML configuration of the key from the

Settings page of the phone's web user interface (WUI) and edit it to suit your needs.

Then paste the edited XML into the "Number" text field and change the key's type to

"Xml definition".

Transferring active calls and ringing incoming calls to the number set in the "Number" text field. Pressing the key once will transfer the active or ringing call.

If the text field is empty, pressing the key will put the "Enter number" screen on the display. Enter the number and press / to complete the transfer.

Voice Recorder The phone does not record the voice streams at all; they must be recorded on the

PBX where a recording account must be set up. Pressing the key when the phone is idle will establish a connection between the phone and the recording account, making it possible to record spoken memos, meetings, or conferences. Pressing the key during a call will establish a three-party conference with the two phones and the recording account as participants. Please be advised that you must respect the legal restrictions of your country for recording calls with or without the participants' knowledge and permission.

Xml Definition

For further information, see the article "Transferring calls" in the chapter "Using the phone".

Copy the XML sub tag of the action(s) you want the key to perform into the text field.

The currently available settings can be found here: http://wiki.snom.com/Features/

Mass_Deployment/Setting_Files/XML/XmlSubTags.

89

Appendix 5 - Programmable Functions

K

ey Events

ABS Address book search (OCS accounts)

Accepted Calls (Accepted List) List of calls accepted on the phone

Call Lists Call history list (missed, received, dialed calls)

Change active ID List of registered SIP identities

Conference Starting a conference

Contacts

Directory

DND

Favorites

Forward all

Contact List, where the Presence State of selected users can be seen (online, busy, offline)

Internal phone directory

Turning "Do not disturb" function (DND) on an off. When mapped to a function key with an LED, the LED will light up when DND is turned on.

Favorites list

Help

Hold

All incoming calls will be forwarded to another extension or an external phone number. After turning call forwarding on with this key, the display will prompt you to enter - or confirm/change a previously entered - forwarding number.

FW versions lower than 8: Phone's IP address, MAC address, and firmware version.

FW 8 and higher: Phone's IP address and the URI to snom Wiki. IP address, MAC address, and firmware version can be found in Settings > 6 Information >

2 System Information.

Placing the active call on hold

LDAP Directory Allows the user to look up a remote directory while dialing. Once set, this pressed key will open up the Direcory Search window. If LDAP is setup, corresponding matching entries as returned by the sever will be shown. If LDAP is not used and and presence_lookup_number setting is turned on, the contact matches will be shown.

The default edit mode is alphanumeric in this state.

Logoff Identities Caution: This option will delete all account settings!!

Usage: Mainly useful for call centers with frequently changing users.

Menu Calling up the settings menu of the phone

Missed Calls

Monitor Calls

(not available on snom 300)

Missed call history list

When the phone has been programmed to monitor extensions and do/allow call pickup, a key can be mapped to show the list of monitored extensions and do call pickup from the monitor.

FW v8.7.2 and higher: The list will show only active extensions (i.e., busy or ringing).

When there is no activity on any monitored extensions, the list is empty.

Mute Mutes/unmutes the microphone (handset, speakerphone, headset) during active call

Next Outgoing ID Selecting the next identity as the outgoing identity

Presence State Providing access to a list where the Presence state of each registered SIP Identity can be defined (online, offline, busy, invisible).

Prev. Outgoing ID Selecting the previous identity as the outgoing identity

90

Appendix 5 - Programmable Functions

Reboot

Record

Rebooting the phone

The phone does not record the voice streams at all; they must be recorded on the

PBX or other external device. Pressed during a call, the key informs the PBX to start and stop the recording of the audio stream on the PBX. While the call is being recorded, the recording symbol will either blink on the display or be displayed, in red , in the status line, depending on the phone type; if the function key has an

LED, the LED will be lit throughout the recording. Please be advised that you must respect the legal restrictions of your country for recording calls with or without the participants' knowledge and permission.

Redial

Retrieve

Dialed call history list (last call at the top)

Retrieves new mailbox messages. This key becomes active when the phone has received a message waiting indication (MWI) with a valid mailbox URI.

Status Messages Currently available status messages (see Appendix 2)

Transfer Transfering the active call or an incoming call that you do not want to pick up. See the article Transfering calls in the chapter Using the phone.

Pressing the key will put the "Enter number" screen on the display. Enter the number and press / to complete the transfer.

91

Appendix 6 - Bluetooth Module (D765 only)

U

sing the Phone with a Bluetooth Headset

The phone has a built-in wireless module that is compatible with Bluetooth v4.0 + EDR, class 2, headsets.

Note: Please test any headset you want to use with a Snom phone prior to purchasing the

headset. Snom cannot guarantee that any headsets will be compatible with Snom phones.

In particular, but not excluding other possible factors, the software on third-party headsets may have been modified unbeknownst to Snom, resulting in restrictions to functionality up to and including loss of compatibility with the Snom phone.

Currently, one audio/video Bluetooth or Bluetooth-compatible device can be paired with the phone. The phone supports one headset at a time. When more than one headset is connected to the phone, the devices used in descending order of priority will be Bluetooth headset -> USB headset -> wired headset via RJ connector.

P

airing

1. Turn on the headset to make it detectable. You may need to put some headsets into pairing mode to make them detectable.

2. Open the phone‘s Settings menu -> 1 Preferences -> 7 Bluetooth (Fig. 1). When there are no paired or connected devices, the setting will say "No devices available" (Fig. 2).

Fig. 1 Fig. 2

3. Press the context-sensitive function key underneath the symbol of the magnifying glass to initiate discovery mode. The display now says "Discovering. Please wait..." (Fig. 3).

If devices are detected, they will be listed on the display in the List of discovered devices, one device per line (Fig. 4). Each line contains a symbol for the type of device, the make/model of the device, and its MAC address. Currently only the type Audio/Video is supported, indicated by the headset symbol.

If no device is found or the headset you want to pair is not among the listed ones, make sure that the headset is detectable, i.e., turned on and within range, then press the function key underneath the magnifiying glass

again to repeat the search.

Fig. 3 Fig. 4

92

Appendix 6 - Bluetooth Module (D765 only)

4. When more than one device is listed, select one of them with the up and down arrows on the navigation key .

5. When the headset you wish to pair is highlighted (Fig. 4), put the headset into pairing mode and press the OK key on the phone. Please, refer to the headset‘s manual for further information on putting the headset into pairing mode.

The display will show the message "Pairing. Please wait..." (Fig. 5). When phone and headset have been paired, the display will show the connected headset with the audio/video symbol, make and model, and

MAC address (Fig. 6). When headset mode on the phone is turned on by pressing the headset key the BT headset symbol is shown in the status line of the display (Fig. 7 on page 94).

,

Fig. 5 Fig. 6

U

npairing

To be able to use a different headset with the phone, the currently connected headset must be unpaired from the phone first. This can be done whether the headset is turned on or off.

1. Open the phone‘s Settings menu -> 1 Preferences -> 7 Bluetooth.

2. Press the function key underneath the "Unpair" symbol (Fig. 6).

D

isconnecting a Paired Headset

When the headset is turned off or moves out of transmission range of the phone, or when a different audio device (handset, speakerphone) is selected on the phone, the headset is disconnected but it will remain paired with the phone.

R

econnecting a Paired Headset

When the connection to the headset has been severed, the phone will attempt to reconnect with the headset:

◦ Every 10 seconds during the first 10 minutes. Please note that reconnecting may take a little longer than 10 seconds if the connection cannot be established immediately.

◦ Every 60 seconds if the phone could not establish a connection within the first 10 minutes of trying.

Note: The headset may also try to reconnect to the phone.

93

Appendix 6 - Bluetooth Module (D765 only)

Reconnecting manually

If automatic reconnection is unsuccessful or if you do not want to wait for it, you can also use the manual method.

1. Open the phone‘s Settings menu -> 1 Preferences -> 7 Bluetooth.

2. If necessary, use the down-arrow on the navigation key paired devices, and press the OK key .

to select the headset in the list of

U

sing a Bluetooth Headset with the Snom Phone

Please, also consult the headset‘s manual for more information on how to use it. The headset behavior described in the following description applies to three tested headsets with the firmware on the headsets and the phone at the time. The behavior with other firmwares and other headsets may be different.

Selecting Ringer Device for Incoming Calls

Use the web user interface of the phone to select whether you want incoming calls to ring on the phone, on the headset, or on both.

Note: To be able to accept calls on the headset, the phone must be running headset mode

(see next section "Turning on Headset BT Mode"). You can accept calls directly on the headset or via the phone regardless of the selected ringer device.

Open the phone's web user interface -> Preferences, section General Information / Ringtone

Defaults and select one of the following settings from the drop-down menu of Ringer Device for

Headset:

Use Speaker. Incoming calls ring on the casing speaker of the phone.

Use Headset. Incoming calls ring on the headset only.

Use Headset and Speaker. Incoming calls ring on the casing speaker of the phone and on the headset.

Turning on Headset BT Mode

Press the headset key on the phone. The key's LED lights up, indicating that headset mode is now the active audio mode for calls. Additionally, headset mode is indicated by the headset symbol and the letters "BT" on the left side of the status line (FW v8.7.6 and higher) (Fig. 7) .

Fig. 7

94

Appendix 6 - Bluetooth Module (D765 only)

Making Calls in Headset BT Mode

Bluetooth headsets do not support off-hook on idle. Therefore the voice dialing function on the headset must be activated for dialing, except for tone schemes using local DTMF tones, like the USA.

Turning on Voice Dialing

On three tested headsets, the voice dialing function is activated by pressing the call key for approx. 1 to 2 seconds until you hear the "voice dial" message or signal (pressing the key for too long resulted in turning the headset off). Please, refer to the headset's manual for further information.

Dialing

You can either press the call key on the headset or the OK key on the phone to begin dialing a phone number entered manually or selected from the directory or a call list.

• Tone schemes using local DTMF tones (e.g., USA): The voice dial function is not required. Enter the number on the phone‘s keypad and briefly press the call key to dial.

• Other dialing methods.

◦ Tone schemes without local DTMF tones (e.g., Germany): Enter the number on the phone‘s keypad and long-press the headset‘s call key to voice dial the number or press the phone‘s OK key / to dial.

◦ Directory and call lists: Select a contact in the directory or a call from a call list and long-press the headset‘s call key to voice dial the number or press the phone‘s OK key to dial.

Accepting Calls in Headset Mode

Briefly press the call key on the headset or press the OK key on the phone.

Ending Calls

Briefly press the headset‘s call key or press the Cancel key on the phone.

Adjusting Headset Volume

On the phone

When the headset is the active audio mode, as indicated by the headset symbol in the status line andby the bright green LED on the headset key, you can use the phone‘s volume key to set the call volume for the headset. The phone will save the setting for calls with any headset. The next time the BT headset is connected or reconnected to the phone and headset BT audio mode is activated on the phone, the phone will transmit the saved volume setting to the BT headset, overwriting any different setting on the headset.

95

Appendix 6 - Bluetooth Module (D765 only)

Fig. 8

On the headset

Use the volume key(s) on the headset to adjust the volume immediately.

When headset BT mode is the active audio mode on the phone, the new volume setting will also be transmitted to the phone and saved.

When headset BT mode is not the active audio mode on the phone, the headset will not transmit the new volume setting to the phone; the next time audio is activated from the phone, the headset volume setting will be overwritten by the volume setting stored on the phone.

Muting the Microphone

During a call, you can mute/unmute the headset‘s microphone by pressing the Mute button on the headset. Please, refer to the headset‘s manual for further information.

With some headsets, you can also press the Mute key please test any headset you want to use to see if it works.

on the phone. If you wish to use this feature,

Mute microphone indication

• On the phone. The symbol of the muted microphone is shown in the status line next to the "BT" symbol (Fig. 9). When the microphone is unmuted, the symbol disappears. Additionally, the red LED on the mute key is on. When the microphone is unmuted, the red LED is turned off.

Fig. 9

• On the headset: Message or other indication that the microphone is muted. Please, refer to the headset‘s manual for further information.

96

Appendix 7 - GNU General Public License

COPYRIGHT NOTICE AND WARRANTY

DISCLAIMER

I.

Das Produkt enthält Software, die unter der GNU General Public

License, Version 2, frei genutzt werden darf.

This Product contains Software applicable to GNU General Public

License, Version 2 which can be used freely.

II.

Im Verhältnis zu den Lizenzgebern der Software gilt der folgende

Haftungsausschluss:

Towards the licensor of this Software the following liability is disclaimed:

This program is distributed in the hope that it will be useful, but

WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

See the GNU General Public License for more details.

III.

Der Lizenztext der GPL lautet wie folgt:

The GNU General Public License is as follows:

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Copyright (C) 1989, 1991

Free Software Foundation, Inc.

59 Temple Place, Suite 330

Boston, MA 02111-1307, USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software-

-to make sure the software is free for all its users. This General Public

License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other

Free Software Foundation software is covered by the GNU Library

General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price.

Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and

(2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.

Also, for each author‘s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents.

We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone‘s free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

GNU GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION

AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program

(independent of having been made by running the Program). Whether that is true depends on what the Program does.

1.You may copy and distribute verbatim copies of the Program‘s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section

1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception:

97

if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the

Program, the distribution of the whole must be on the terms of this

License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3

.

You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machinereadable source code, which must be distributed under the terms of

Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the

Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions

98

are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the

Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the

Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients'exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/ or new versions of the General Public License from time to time.

Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and „any later version“, you have the option of following the terms and conditions either of that version or of any later version published by the Free

Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free

Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the

Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT

PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE

STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR

OTHER PARTIES PROVIDE THE PROGRAM „AS IS"WITHOUT

WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND

PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE

PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL

NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR

AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR

ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE

THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR

DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL

OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR

INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED

TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR

LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE

OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),

EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

If requested by you, the complete corresponding source code of the

Software can be sent by snom technology AG on a standard data storage medium against the reimbursement of the manufacturing costs of EUR 5.- per unit.

The complete corresponding source code of the Software can also be downloaded from our web site http://www.snom.com/gpl_.html?&L=0.

V..

Weitere Informationen finden Sie auch unter

http://www.snom.com.

For further information see http://www.snom.com.

How to Apply These Terms to Your New Programs

I f you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the

"copyright" line and a pointer to where the full notice is found.

<one line to give the program‘s name and a brief idea of what it does>Copyright (C) <year> <name of author>

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but

WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation,

Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

IV.

Den vollständigen korrespondierenden Sourcecode der

Software schickt Ihnen die snom technology AG auf

Nachfrage gerne auf einem üblichen Datenträger gegen

Erstattung der Herstellungskosten in Höhe von EUR 5,- zu.

Der vollständige korrespondierende Sourcecode kann auch über unsere Website unter http://www.snom.com/gpl_.html?&L=0 herunter geladen werden.

99

snom technology AG

Wittestr. 30 G

13509 Berlin, Deutschland

Tel. +49 30 39 83 3 0

Fax +49 30 39 83 31 11 snom technology, Inc.

136 Harvey Road, Suite A102

Londonderry, NH 03053, USA

Tel. +1 339 227 6160

Fax +1 339 227 6180 snom UK Ltd

Amethyst House, Meadowcroft Way

Leigh Business Park, Leigh

Manchester WN7 3XZ, UK

Tel. +44 161 348 7500

Fax +44 169 348 7509 snom France SARL

6 Parc des fontenelles

78870 Bailly, France

Tel. +33 1 80 87 62 87

Fax +33 1 80 87 62 88 snom technology SRL

Via A. Lusardi 10

20122 Milano, Italia

Tel. +39 02 00611212

Fax +39 02 93661864 snom technology Ltd.

Rm. 828, 5F, No. 285, Sec. 4

Zhongxiao E. Rd., Da‘an Dist.

Taipei City 10692, Taiwan

Tel. +886 2 8751 1120

Fax +886 2 8751 1130

Your specialist retailer - Ihr Fachhändler -

Votre distributeur - Su distribuidor - Il tuo rivenditore:

User Manual

IP Phone D765 | snom 760

© 2015 snom technology AG v1.05

advertisement

Key Features

  • Large color display
  • User-friendly interface
  • Bluetooth connectivity (D765)
  • Call transfer
  • Call hold
  • Conference calling
  • Speed dialing
  • Call forwarding
  • Call waiting
  • Directory management

Frequently Answers and Questions

How do I connect the phone to the network?
The phone can be connected to the network using an Ethernet cable. You can also use a Power over Ethernet (PoE) switch to power and connect the phone.
How do I make a call?
To make a call, simply dial the number using the keypad and press the green call key.
How do I answer a call?
To answer an incoming call, press the green call key.
How do I put a call on hold?
To put a call on hold, press the hold key.
How do I transfer a call?
To transfer a call, press the transfer key and then dial the number of the recipient.

Related manuals

Download PDF

advertisement

Table of contents