Thermal Receipt Printer
User Manual
Please keep user manual for reference
и
=
1
.,
=
—
A
OD
©
D
=
er
U
=
=
er
OD
-
Thermal Receipt Printer
Attention
* Put printer on stable surface. Choose firm, level surface where avoid vibration.
» Don’t use and store printer in high temperature, high humid and serious polluted place.
e Connect power adapter properly to grounded receptacle. Avoid using the same socket with large power
consumption devices that can lead to power fluctuation.
» Avoid water or other objects go into printer. Once happened, turn off printer immediately.
* Print without paper roll will damage printing head seriously.
* Unplug printer from power receptacle 1f do not use 1t for a long time.
* Only use approved accessories, never try to disassemble, repair or remodel it.
* Use standard power adapter.
* Use high quality paper, this ensures the printing quality and life of printer.
* Please turn off power before plug/ unplug cable.
* Printer 1s used only under 5000 meters.
Applications
POS system
EFT POS system
Gym, post, civil aviation system
Inquiry, service system
Instrument test
Tax, Tab
Packing
Printer & accessories
User manual 1PC
Printer 1PC
Serial/USB power cable 1PC
Power adapter(24V) 1SET
Paper roll IROLL
Driver 1PC
Thermal Receipt Printer
Features
260mm/s high printing speed.
Support kitchen, network printing.
80-120mm large capacity paper house ( Only apply to XP-C260M ).
High speed text and graphic printing, Excellent printing quality and reliable performance.
Support printer status monitoring function, Control printer’s status at any time.
Avoid order missing.
Receipt coming alarm and error alarm reminder.
Driver high speed download printing mode, Support Linux system.
Support black mark detection and overtype function.
Support 256k Bytes NV logo download store and print.
Serial + USB + Lan interface.
Better sealing performance for mechanism and printer, Mechanism life can reach to 100km and Auto
cutter life with 100 million cuts.
Support QR Code Printing.
Support Chinese GB18030.
Multiple international can be optional, Simplified/traditional Chinese are convertible by command.
Built in web page, Setup printer directly through IE port.
58MM/80MM paper roll can be optional.
Avoid order missing High printing speed Support QR Code printing
Support network printing Support OPOS driver Support international languages
ДИ = OPOS
J O
Thermal Receipt Printer
Specifications
Printing method
Direct thermal
Printing speed 260mm/s
Black mark detection Support
Network monitoring Support
Roll paper 79.5 £ 0.5mm
Column capacity
576 dots/line or 512 dots/line
Character size
ANK, Font A: 12x24 dots
Font B: 9x17 dots
simplified/traditional Chinese: 24x24 dots
Command
Compatible with ESC/POS
Interface (optional)
Serial FUSB+LAN, USB+Parallel
Auto cutter
Full or Partial (optional)
Reliability
Printing head life:100 km
Barcode
UPC-A/UPC-E/JAN13(EAN13)/JANS(EANS)/
CODE39/ITF/CODABAR/CODE93/CODE128
Auto cutter
Full or Partial (optional)
2D Bar code QR CODE
NV flash 256k Bytes
Input buffer 2048k Bytes
Paper thickness 0.06~0.08mm
Adaptor input voltage
AC 110V/220V, 50~60Hz
Power supply DC 24V=2.5A
Printer input voltage DC 24V==2.5A
Cash drawer control DC 24V=1A
Working environment
Temperature (0~45°C), humidity (10~80%)
Storage environment
Temperature (-10~60°C), humidity (10~90%)
Drivers
Win 9X/Win 2000/Win 2003/Win XP/Win 7/Win 8/Win 8.1/Linux
Thermal Receipt Printer
Connection
A. Connect AC power cord to power, DC power cord to printer.
B. Connect printer and computer/ tablet.
C. Connect cash drawer.
Power adaptor
Qu”
Paper roll loading
80mm thermal paper roll recommended to 80mm series printers.
The method of paper loading is as below:
a. Open top cover
b. Drop paper roll in the hole as below
c. Pull the paper into the paper holder, then close top cover
d. Print one self-test to make sure paper correctly installed.
Thermal Receipt Printer
Setting printing Mode( DIP Switches)
DIP switches can be changed settings, such as: cutter, languages, beeper, print density baud rate etc.
Г] DIP SWITCH SETTINGS
ll fi
2 3 4 5 6 7 8
[] []
DIP Switch functions
DIP Function
No. Function ON OFF
SW-1 Select cutter NO YES
SW-2 Select beeper YES NO
SW-3 Select print density DARK LIGHT
SW-4 Two-byte character code NO YES
SW-5 Character per line 42 48
SW-6 Cutter with cash drawer YES NO
SW-7 ON OFF ON OFF
SW-8 ON ON OFF OFF
Transmission 38400 115200 9600 19200
© speed (bps) - bit/s
Thermal Receipt Printer
DIP Switch functions (58mm/80mm)
DIP Function
No. Function ON OFF
SW-1 Select cutter NO YES
SW-2 Select beeper YES NO
SW-3 58mm YES NO
SW-4 Two-byte character code NO YES
SW-5 Character per line 42 48
SW-6 Cutter with cash drawer YES NO
SW-3 OFF OFF ON ON
SW-5 OFF ON OFF ON
Character per line| 48/64CPL | 42/56CPL | 32/42CPL | 32/42CPL
SW-7 ON OFF ON OFF
SW-8 ON ON OFF OFF
et (hoa) pits| 38400 115200 9600 19200
Button name, indicator LED light and function
(1) FEED button
Press to FEED paper manually.
(2) Paper indicator(LED light)
Blue and red light are on means lack of paper, no alarm means all goes well.
(3) Power indicator
Light is on means connected properly.
(4) Error button
When out of paper, cutter error or printing head overheat occurred, the ALARM indicator twinkles.
Self Test
Method: When printer is connected power, turn off , press “FEED” button and turn on at the same time, 2
seconds later release “FEED” button, a completed self test will be printed out to show printer settings.
Method to enter hexadecimal mode
Method: When printer is connected power, press“FEED” button and turn on at the same time for about 10
seconds, release “FEED” button to enter data hex dump mode. it will print “Hexadecimal Dump”on the
paper.
©
Thermal Receipt Printer
Reset
Method: When printer is connected power, press“FEED” button and turn on at the same time for about 20
seconds, reset succeed if beeper peals.
QR Code function
1. QR Code: Set unit size
[Command Code]
ASCII: GS (0 gn
Decimal: 29 40 107 48 103 n
Hex: 1D 28 6B 30 67 n
Function Description: Set the unit size of QR Code into "n"
Parameter Range: 1 < n< 16
Default n = 3
Note: N dot = Unit width = Unit height
The ESC @ command setup failed when printer is powered off and reset.
2, QR Code: Set up error correcting grade
[Command Code]
ASCII: GS (0 in
Decimal: 29 40 107 48 105 n
Hex: 1D 28 6B 30 69 n
3. Function Description: Set up QR Code error correcting grade,
The meaning of parameter “N” is as below:
n Instruction Correct proportion (%)
48 Grade L 7
49 Grade M 15
50 Grade Q 25
51 Grade H 30
48 < n < 51 Parameter Range:
n=48 Default:
Note: QR Code used RS algorithm to generating error correcting Code and the command setting
Will be expired when printer was reset and powered off.
Thermal Receipt Printer
QR Code: Data transmission to code cache
[Command Code]
ASCII: GS (0 nLnHdl...dk
Decimal: 29 40 107 48 103 nL nH d1...dk
Hex: 1D 28 6B 30 80 nL nH d1...dk
Function Description: Setting QR Code data transmission to code cache
Parameter Range: 4 < (nL + nHx256) < 2710
32< d< 255
Default: None
Note: After receiving, The data will be kept until reset of next time.
K byte d1...dk be regarded as coded data
D1....dk only can contain below data in the table.
Charactersheet Including below character in the table
Figure “079”
Letter and figure “079”, “A”-“7Z7”, SP, $, %, *, +, -, 0 , « 5}
Chinese Character GB18030-2000, Shift-JIS, JISX0208+5 )
8 bits data 00H-FFH
The ESC @ command setup failed when printer is powered off and reset.
QR Code: Printing QR Code of code cache
[Command Code]
ASCII: GS (0?
Decimal: 29 40 107 48 129
Hex: 1D 28 6B 30 81
Function Description: Printing the encoding data of QR Code code cache
Parameter Range: None
Default: None
Note: Ifthe QR code size beyond printing area, Printing will be cancelled
If the code cache data is empty, Printing will be cancelled.
Thermal Receipt Printer
Cutter stuck maintenance
Method (1)
Turn off the power and then restart.
Method (2)
Turn the gear on printing head , cutter can be returned to its original position.
A Notice: To avoid the damage of the printing head and automatic paper cutter, please do not open cutter
and mechanism violently.
Driver installation
Two method: 1) Install driver directly.
2) Printing via port directly.
1) Install driver under WINDOWS OS (Steps as below):
1.Double click |
Welcome In the POS Printer Driver Yr. O
bctup Nizar
This will instal POS Printzr Driver V7.02 version 7.02 on your
r.
com
It is ‘ecommendad that vou close al otrer apalications bafore
continuine.
Click Next tc continue, or Carcel to exit Setup,
2.Select: I accept the agreement.
License Agreement
Mzasz read the fallowine important information botore centinuing.
Plzasz read the following License Agreement, You must acceot the temas of ths
zgreement befors continuine vb the Installation.
SOFTYWARFI TRHS= AGRFFWFNT A
[MPORTANT - FLCASC RCAD CARCTU__Y! The POS softwere wou are about to BL
Troarilenar will liz licensed To you, Le icensee, on Lhe comlliom [hel gn Agree
Ah PUE ES the terme and conditions set Toth in this lega agreament, PLEAS=
ACAD TII5 ACRCTMOHT CARCTALLY. WCU WILL 3C 30UND CY TIC TCRME OT
THIS, AGR=FMFI TF YO INS TAN, DEAR ПАЛ, COEY, OR OTHFRWTS= 115F THF
SUF WAKE. If wou do not agrea to the terms contzinad © Cue agreamant, plaasa
do not instal or download the softwere. Flease record the date of downloac in
wilar Lee ac bwaler Doe miled ninety (90) day wanesnly (sus halo).
Thermal Receipt Printer
3.Default installation folder.
Select Destination Locetion
Wehere shculd POS Printer Cmver 47.01 be instollec?
SetLp wil natal EOS prmitar Divas Y7,01 1169 the felwrg folda”.
0 coNTALA, cick Mexc, If vou vould Ia to selacta ciifarant folder, Click Browse.
BICWER...
At least 7.3 ME of free disk soace s requrad.
= dack | Next > | | Cance
4. Create a shortcut on the desktop.
Select Additional Tasks
Whiz additiona Tasks should bz portormizd?
Select the addtiona tasks you wrould lixz Sabup to parfor while rstalirg FOS Printar
Driver W7.0_, Cien clio ast.
Addrtional cons:
У £rasts a desktop COM
A
LL
Qi
E
=
in
5
y
©
=
a]
fi]
5. Install by below instruction:
Ready to Install
Setup is now ready to begin instcling POS 3rrter Driver Y7.01 07 vour computer,
Clck Instzll to continue wh thz instalation, or dick Back if you want to revew 07
change any settings.
Гивай лай эп lon ali:
CAPOS Рпптаг ОЭгмат МУ
АНИ иная | asks:
Addmiona cons:
Crerte a desktop con
Thermal Receipt Printer
6. Finished.
Completing the POS Printer Driver Yr. O
Sctup Wizar
Setup has finshed instaling POS Prrter Driver V7.01 on your
computer. The application mey be lzunchac by seecting the
retolled icors.
Jick Finsh 70 ext Sat.ip.
vliLaunen PSS Printer Criver YZ.OF
Hneh
7. Choose the right port, shown as below:
You are using Windows 7 x86 05,
Please select Windows 7 to install,
Select Windows OS
{Windows XP f- Windows Vista
f- Windows 2003 { Windows 8
Select Printer Series
(* POS-58 © POS-58C
~ poss [FEE
© POS-90 ( POS-76
© POS-76C
‘Remarks: "C" means item with cutter
| Set Default Printer
| Check USB Port | Install Mow Cancel
You are using Windows 7 x86 O5,
Please select Windows 7 to install,
Select Windows OS
{Windows XP f- Windows Vista
{Windows 2003 { Windows 8
=
POS Printer Driver V7.01 mb
i Your printer’s USB port is;
USB 001;
| SA Default Printer
Check USE Port Install Mow Cancel
Thermal Receipt Printer
8. Choose the right series, shown as below:
Install Configuration
You are using Windows 7 x86 OS,
Please select Windows 7 to install,
Select Windows 05
Co Windows XP Co Windows Vista
o Windows 8
Select Printer Series
© РО5-58 © POS-58C
C POS-80 ® 1РО5-80С
© РО5-90 © POS-76
(“ POS-76C
*Remarks: "C" means item with cutter
| Set Default Printer
| Check USE Fort | Install Mow Cancel
9. Click “OK?” to configure the port.
POS Printer Driver v... ВЕН
I, SUCCEED!
Thermal Receipt Printer
10. Choose the detected USB001, click apply, shown as below :
,
= POS-80C Properties ==
| General | Sharing | Ports | Advanced Color Management | Security | Device Settings |
4 7
=r POS-80C
Print to the following portés). Documents will print to the first free
checked port.
Port Description Printer
[5] COM3Z: Serial Port
[5] COMS: Serial Port
[F] COM6: Serial Port
[7] FILE: Print to File
[C] USBOO2 — Virtual printer port for...
[5] XPSPort Local Port Microsoft XPS Document Writer
=
| Add Port... || Delete Port ] | Configure Port... |
Enable bidirectional support
[C1 Enable printer pooling
OK || Cancel || Ay
11. Select general and print test page.
,
= POS-80C Properties lo
General | Sharing | Ports | Advanced | Color Management | Security | Device Settings |
‘ /
= POS-80C
Location:
Comment:
Model: POS-80C
Features
Color: No
Double-sided: No
Staple: No
Paper available:
ZPrinter Paper(80 x 420mm) +
Speed: Unknown
Maximum resolution: 203 dpi
| Preferences... | | Print Test Page
[ ok || cance | |
Apply |
Thermal Receipt Printer
2) Printing via port directly
a. No need to install printer driver. Directly choose a right port (i.e., USB, LAN, Serial, Parallel) in software.
b. Printing via port needs commands to control printer, ESC/ POS commands are integrated directly itself.
Clearance
One of the followings occurred, please clean printing head.
(1) Printing is not clear
(2) Any vertical column is not clear
(3) Paper feed noisily.
Printing head cleaning steps:
(1) Turn printer off, release power cord. Open top cover, take out paper roll.
(2) Wait till printing head cooling if it just finished printing.
(3) Clean printing head completely using swab with alcohol (without water).
(4) Until alcohol completely volatilized, close top cover.
(5) Connect power again, print self test to check if it is clean.
A Notice:
(1) Please make sure power off when maintaining printer.
(2) Don’t touch or scratch printing head surface, roller and sensors.
(3) Avoid gas, acetone or other organic solvent.
(4) Wait till alcohol completely volatilized, close top cover and connect power again. Try print self
test to make sure it works properly.
A Warning : No part of this manual can be changed without agreement. The company
reverses the rights to modify the technology, components, software and
hardware. You may ask the distributors for more product information. No
part of chapter in this manual can be copied or transmitted in any format
without permission.
">