Accessories - Bachmann electronic GmbH

Accessories - Bachmann electronic GmbH
Accessories
Front Terminals and Terminal Sets
The standard connection technology for digital and
analog signals of the M1 controller system is implemented with robust spring-loaded or screw terminals
that can be fixed securely with a screw flange. Our
product portfolio has the right connection to suit your
requirements: Terminals with 3.5 mm pitch for analog
signals or high density terminals for digital signals,
and 5.08 mm pitch terminals for digital signals and
power supply connections. Terminals with a 7.62 mm
pitch are suitable for signals such as for grid measuring modules as they can meet particularly high
requirements with regard to isolation.
The front terminals are compatible with the P
­ hoenix
Contact COMBICON® connection (5.08 and 7.62
pitch) or miniCOMBICON® (3.5 pitch).
The following features are provided depending on
type:
•Terminals to a proven industrial standard
•Space saving pitch, depending on signal type
•Robust fixing via screw flange
•Coding of plug and terminal
•Different connection technologies possible
(cage clamp, screw)
•Marking with stickers
•Measuring via test connection possible in part
Technical data of the individual terminals
The following terminal types are contained in terminal
sets:
3.5 pitch, cage clamp terminals KZ 35/xx
3.5 pitch, small cage clamp terminals KS 35/xx, old type
3.5 pitch, small cage clamp terminals KS 35/xx, new type
5.08 pitch, cage clamp terminals KZ 51/xx
7.62 pitch, screw terminals SS 76/xx, side
7.62 pitch, screw terminals SS 76/xx, inverted
3.5 pitch, screw terminals SS 35/xx, side
3.5 pitch, screw terminals SS 51/xx, side
5.08 pitch, screw terminals SV 51/xx, front
120
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
3.5 Pitch, Cage Clamp Terminals
KZ 35/xx
Cage clamp terminals for rapid connection in pushin contacts with space saving 3.5 mm pitch. The
front labeling facility and the test connection using
a standard 1 mmØ test pin make this terminal
ideally suited for analog signals and digital modules
with a large number of channels. The screw flanges
also ensure a secure mounting even in rugged
environments.
Beispieldarstellung
KZ 35/xx
General
Pitch
3.5 mm
Numbers of pins
2, 3, 4, 5, 6, 7, 8, 10, 12, 16, 19
Rated current
Up to 8 A with 1.5 mm²
Rated voltage
300 V acc. to UL / 160 V acc. to VDE
Rated voltage (III/2)
160 V
Color
Green
Contact surface
Tin, lead-free
Flammability class
acc. to UL94
V0
Fixing
Side screw flange M2.5
Labelling
On front with stickers
Conductors
Conductor cross-section rigid min.
0.14 mm²
Conductor cross-section rigid max.
1.5 mm²
Conductor cross-section flexible min.
0.14 mm²
Conductor cross-section flexible max.
1.5 mm²
Conductor cross-section, ferrule
with collar min.
0.25 mm²
Conductor cross-section, ferrule
with collar max.
0.5 mm²
AWG acc. to UL/cUL min.
28
AWG acc. to UL/cUL max.
16
Ferrules
Acc. to DIN 46228-4 with insulation collar
Cross section: 0.14 mm²; Length: 3.5 mm
Cross section: 0.34 mm²; Length: 8 to 10 mm
Cross section: 0.5 mm²; Length: 8 to 10 mm
Cross section: 0.75 mm²; Length 8 to 10 mm
Stripping length and pin length
3.5 mm
121
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
KZ 35/xx
Tools
Screw flange
Screwdriver, blade width ≤ 2.5 mm, thickness ≤ 0.4 mm
Screw flange
Torque max.
0.3 Nm
Spring contact actuator
Screwdriver, blade width ≤ 2.5 mm, thickness ≤ 0.4 mm
Test connection
1 mmØ test pin
Coding
Coding
By removing the coding pins on the contact and corresponding coding
element in the pin housing of the module. For details see the section
»Coding«
Approvals
UL / cUL
cULus Recognized, VDE
Manufacturer
Phoenix Contact
FK-MCP1,5/..-STF-3,5 (.. =Number of poles, two-digit)
122
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
3.5 Pitch, Small Cage Clamp
Terminals KS 35/xx, Old Type
Example illustration
Narrow design cage clamp terminals for rapid
connection in push-in contacts with space saving
3.5 mm pitch. This terminal is ideally suited for analog
signals with a test connection using a standard 1
mmØ test pin. The screw flanges also ensure a secure
mounting even in rugged environments.
The mounting form shown here is replaced by the
new mounting from because the new design allows
labelling on the front.
KS 35/xx
General
Pitch
3.5 mm
Numbers of pins
3, 4, 6, 12, 15, 16, 19, 20
Rated current
Up to 8 A with 1.5 mm²
Rated voltage
150 V acc. to UL / 160 V acc. to VDE
Rated voltage (III/2)
160 V
Color
Green
Contact surface
Tin, lead-free
Flammability class
acc. to UL94
V0
Fixing
Side screw flange M2.5
Labelling
On side with stickers
Conductors
Conductor cross-section rigid min.
0.2 mm²
Conductor cross-section rigid max.
1.5 mm²
Conductor cross-section flexible min.
0.2 mm²
Conductor cross-section flexible max.
1.5 mm²
Conductor cross-section, ferrule
with collar min.
0.25 mm²
Conductor cross-section, ferrule
with collar max.
0.75 mm²
AWG acc. to UL/cUL min.
24
AWG acc. to UL/cUL max.
16
Ferrules
Acc. to DIN 46228-4 with insulation collar
Cross section: 0.25 mm²; Length: 3.5 mm
Cross section: 0.34 mm²; Length: 8 to 10 mm
Cross section: 0.5 mm²; Length: 8 to 10 mm
Cross section: 0.75 mm²; Length 8 to 10 mm
Stripping length and pin length
3.5 mm
123
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
KS 35/xx
Tools
Screw flange
Screwdriver, blade width ≤ 2.5 mm, thickness ≤ 0.4 mm
Screw flange
Torque max.
0.3 Nm
Spring contact actuator
Screwdriver, blade width ≤ 2.5 mm, thickness ≤ 0.4 mm
Test connection
1 mmØ test pin
Coding
Coding
By removing the coding pins on the contact and corresponding coding
element in the pin housing of the module. For details see the section
»Coding«
Approvals
UL / cUL
cULus Recognized, VDE
Manufacturer
Phoenix Contact
FMC1,5/..-STF-3,5 (.. =Number of poles, two-digit)
124
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
3.5 Pitch, Small Cage Clamp
Terminals KS 35/xx, New Type
Example illustration
Narrow design cage clamp terminals for rapid
connection in push-in terminals with space saving
3.5 mm pitch. The front labelling feature and the test
connection using a standard 1 mmØ test pin makes
this terminal ideally suited for analog signals. The
screw flanges also ensure a secure mounting even in
rugged environments.
KS 35/xx
General
Pitch
3.5 mm
Numbers of pins
3, 4, 6, 12, 15, 16, 19, 20
Rated current
Up to 8 A with 1.5 mm²
Rated voltage
300 V acc. to UL / 130 V acc. to VDE
Rated voltage (III/2)
130 V (UL 300 V)
Color
Green
Contact surface
Tin, lead-free
Flammability class
acc. to UL94
V0
Fixing
Side screw flange M2.5
Labelling
On front with stickers
Conductors
Conductor cross-section rigid min.
0.14 mm²
Conductor cross-section rigid max.
1.5 mm²
Conductor cross-section flexible min.
0.14 mm²
Conductor cross-section flexible max.
1.0 mm²
Conductor cross-section, ferrule
with collar min.
0.25 mm²
Conductor cross-section, ferrule
with collar max.
0.75 mm²
AWG acc. to UL/cUL min.
24
AWG acc. to UL/cUL max.
16
Ferrules
Acc. to DIN 46228 T1 / max. 1.5 mm²
Acc. to DIN 46228 T4 / max. 1 mm²
Stripping length and pin length
Min. 8 to 11.5 mm
Tools
Screw flange
Screwdriver, blade width ≤ 3.5 mm, thickness ≤ 0.7 mm
Screw flange
Torque max.
0.2 Nm
Spring contact actuator
Screwdriver blade width ≤ 2.75 mm
Test connection
1 mmØ test pin
125
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
KS 35/xx
Coding
Coding
Coding element »CKF« is inserted on the contact and matches the
unmounted coding element in the pin housing of the module. For details
see the section »Coding«
Approvals
UL / cUL
cULus Recognized, VDE
Manufacturer
SAURO
CBF..0D8-0M (.. =Number of poles, two-digit)
126
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
3.5 Pitch, Cage Clamp Terminals
KZ 51/xx
Example illustration
Cage clamp terminals for rapid connection in push-in
contacts with a 5.08 mm pitch.
For larger cross-sections up to 2.5 mm² with front
labelling and the test connection using a standard
1 mmØ test pin, this terminal is ideally suited for
digital signals. The screw flanges also ensure a secure
mounting even in rugged environments.
KZ 51/xx
General
Pitch
5.08 mm
Numbers of pins
2, 3, 5, 6, 7, 10, 12, 13, 16
Rated current
Up to 10 A with 2.5 mm²
Rated voltage
250 V
Rated voltage (III/2)
320 V
Color
Green
Contact surface
Tin, lead-free
Flammability class
acc. to UL94
V0
Fixing
Side screw flange M2.5
Labelling
On front with stickers
Conductors
Conductor cross-section rigid min.
0.2 mm²
Conductor cross-section rigid max.
2.5 mm²
Conductor cross-section flexible min.
0.25 mm²
Conductor cross-section flexible max.
2.5 mm²
Conductor cross-section, ferrule
with collar min.
0.25 mm²
Conductor cross-section, ferrule
with collar max.
2.5 mm²
AWG acc. to UL/cUL min.
26
AWG acc. to UL/cUL max.
12
Ferrules
Acc. to DIN 46228 T1 or T4, Form A
Stripping length and pin length
3.5 mm
Tools
Screw flange
Screwdriver, blade width ≤ 3.5 mm, thickness ≤ 0.6 mm
Screw flange
Torque max.
0.3 Nm
Spring contact actuator
Screwdriver, blade width ≤ 3.5 mm, thickness ≤ 0.6 mm
Test connection
2 mmØ test pin and 2.3 mmØ test pin
127
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
KZ 51/xx
Coding
Coding
Coding element »CP-MSTB« is inserted on the contact and matches the
unmounted coding element in the pin housing of the module. For details
see the section »Coding«
Approvals
UL / cUL
cULus Recognized, VDE
Manufacturer
Phoenix Contact
FKC-2,5/..-STF-5,08 (.. =Number of poles, two-digit)
128
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
7.62 Pitch Cage Clamp Terminals
SS 76/xx, Side
Example illustration
Screw terminal is also designed for the safe
connection of large cross-sections up to 6 mm² and
corresponding voltage resistance up to 600 V of
network measuring modules. Front labelling feature
and with screw flanges also ensure a secure mounting
even in rugged environments.
SS 76/xx
General
Pitch
7.62 mm
Numbers of pins
6, 10, 11
Rated current
Up to 41 A with 6 mm²
Rated voltage
600 V
Rated voltage (III/2)
1000 V
Color
Green
Contact surface
Tin, lead-free
Flammability class
acc. to UL94
V0
Fixing
Side screw flange M3
Labelling
On front with stickers
Conductors
Conductor cross-section rigid min.
0.2 mm²
Conductor cross-section rigid max.
10 mm²
Conductor cross-section flexible min.
0.20 mm²
Conductor cross-section flexible max.
6 mm²
Conductor cross-section, ferrule
with collar min.
0.25 mm²
Conductor cross-section, ferrule
with collar max.
4 mm²
AWG acc. to UL/cUL min.
24
AWG acc. to UL/cUL max.
8
Ferrules
Acc. to DIN 46228 T1 or T4, Form A
Stripping length and pin length
3.5 mm
Tools
Screw connection
Screwdriver, blade width ≤ 3.5 mm, thickness ≤ 0.6 mm
Screw terminal torque
0.7 to 0.8 Nm
Screw flange
Screwdriver, blade width ≤ 3.5 mm, thickness ≤ 0.6 mm
Screw flange
Torque max.
0.7 Nm
Test connection
No
129
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
SS 76/xx
Coding
Coding
Coding element »CP-PC-RD« is inserted on the contact and matches the
unmounted coding element in the pin housing of the module. For details
see the section »Coding«
Approvals
UL / cUL
cULus Recognized, VDE
Manufacturer
Phoenix Contact
PC 5/ ..-STF1-7,62 (.. =Number of poles, two-digit)
130
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
7.62 Pitch Cage Clamp Terminals
SS 76/xx, Inverted
Example illustration
Screw terminal with inverted face for reliable
mechanical reverse polarity protection in comparison
to SS 76/xx. The SS 76/xx inverted is also designed
for the safe connection of large cross-sections up to
6 mm² and corresponding voltage resistance up to
600 V of network measuring modules. Front labelling
feature and with screw flanges also ensure a secure
mounting even in rugged environments.
SS 76/xx inv.
General
Pitch
7.62 mm
Numbers of pins
6, 10, 11
Rated current
Up to 41 A with 6 mm²
Rated voltage
600 V
Rated voltage (III/2)
1000 V
Color
Green
Contact surface
Tin, lead-free
Flammability class
acc. to UL94
V0
Fixing
Side screw flange M3
Labelling
On front with stickers
Conductors
Conductor cross-section rigid min.
0.2 mm²
Conductor cross-section rigid max.
10 mm²
Conductor cross-section flexible min.
0.20 mm²
Conductor cross-section flexible max.
6 mm²
Conductor cross-section, ferrule
with collar min.
0.25 mm²
Conductor cross-section, ferrule
with collar max.
4 mm²
AWG acc. to UL/cUL min.
24
AWG acc. to UL/cUL max.
8
Ferrules
Acc. to DIN 46228 T1 or T4, Form A
Stripping length and pin length
3.5 mm
Tools
Screw connection
Screwdriver, blade width ≤ 3.5 mm, thickness ≤ 0.6 mm
Screw terminal torque
0.7 to 0.8 Nm
Screw flange
Screwdriver, blade width ≤ 3.5 mm, thickness ≤ 0.6 mm
Screw flange
Torque max.
0.7 Nm
Test connection
No
131
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
SS 76/xx inv.
Coding
Coding
Coding element »CP-PC-RD« is inserted on the contact and matches the
unmounted coding element in the pin housing of the module. For details
see the section »Coding«
Approvals
UL / cUL
cULus Recognized
Manufacturer
Phoenix Contact
IPC 5/ ..-STF-7,62 (.. =Number of poles, two-digit)
132
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
3.5 Pitch, Cage Clamp Terminals
SS 35/xx, Side
Example illustration
Screw terminal for the safe connection in 3.5 mm
pitch for finer wires up to max. 1.5 mm², as used
for analog signals or compact digital modules. The
terminals can be labeled on the front. The screw
flanges also ensure a secure mounting even in rugged
environments.
SS 35/xx
General
Pitch
3.5 mm
Numbers of pins
2, 3, 4, 6, 7, 14, 16, 19
Rated current
Up to 8 A with 1.5 mm²
Rated voltage
160 V
Rated voltage (III/2)
160 V
Color
Green
Contact surface
Tin, lead-free
Flammability class
acc. to UL94
V0
Fixing
Side screw flange M2.5
Labelling
On front with stickers
Conductors
Conductor cross-section rigid min.
0.14 mm²
Conductor cross-section rigid max.
1.5 mm²
Conductor cross-section flexible min.
0.14 mm²
Conductor cross-section flexible max.
1.5 mm²
Conductor cross-section, ferrule
with collar min.
0.25 mm²
Conductor cross-section, ferrule
with collar max.
0.5 mm²
AWG acc. to UL/cUL min.
28
AWG acc. to UL/cUL max.
16
Ferrules
Acc. to DIN 46228 T1 or T4, Form A
Stripping length and pin length
3.5 mm
Tools
Screw connection
Screwdriver, blade width ≤ 2.5 mm, thickness ≤ 0.4 mm
Screw terminal torque
0.22 to 0.25 Nm
Screw flange
Screwdriver, blade width ≤ 2.5 mm, thickness ≤ 0.4 mm
Screw flange
Torque max.
0.3 Nm
Test connection
No
133
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
SS 35/xx
Coding
Coding
By removing the coding pins on the contact and corresponding coding element
in the pin housing of the module. For details see the section »Coding«
Approvals
UL / cUL
cULus Recognized, VDE
Manufacturer
Phoenix Contact
MC 1,5/..-STF-3,5 (.. =Number of poles, two-digit)
134
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
5.08 Pitch, Cage Clamp Terminals
SS 51/xx, Side
Example illustration
Screw terminal for the safe connection in 5.08 mm
pitch and for larger cross-sections up to 2.5 mm²
for digital signals. The terminals can be labeled on
the front. The screw flanges also ensure a secure
mounting even in rugged environments.
SS 51/xx
General
Pitch
5.08 mm
Numbers of pins
2, 3, 5, 6, 7, 8, 10, 12, 13, 16
Rated current
Up to 12 A with 2.5 mm²
Rated voltage
250 V
Rated voltage (III/2)
320 V
Color
Green
Contact surface
Tin, lead-free
Flammability class
acc. to UL94
V0
Fixing
Side screw flange M2.5
Labelling
On front with stickers
Conductors
Conductor cross-section rigid min.
0.2 mm²
Conductor cross-section rigid max.
2.5 mm²
Conductor cross-section flexible min.
0.25 mm²
Conductor cross-section flexible max.
2.5 mm²
Conductor cross-section, ferrule
with collar min.
0.25 mm²
Conductor cross-section, ferrule
with collar max.
2.5 mm²
AWG acc. to UL/cUL min.
30
AWG acc. to UL/cUL max.
12
Ferrules
Acc. to DIN 46228 T1 or T4, Form A
Stripping length and pin length
3.5 mm
Tools
Screw connection
Screwdriver, blade width ≤ 3.5 mm, thickness ≤ 0.6 mm
Screw terminal torque
0.5 to 0.6 Nm
Screw flange
Screwdriver, blade width ≤ 3.5 mm, thickness ≤ 0.6 mm
Screw flange
Torque max.
0.3 Nm
Test connection
No
135
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
SS 51/xx
Coding
Coding
Coding element »CP-MSTB« is inserted on the contact and matches the
unmounted coding element in the pin housing of the module. For details
see the section »Coding«
Approvals
UL / cUL
cULus Recognized, VDE
Manufacturer
Phoenix Contact
MSTB 2,5/..-STF (.. =Number of poles, two-digit)
136
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
5.08 Pitch, Screw Terminals
SV 51/xx, Front
Example illustration
Screw terminals with screws on front enable
convenient mounting and safe connection in 5.08 mm
pitch for larger cross-sections up to 2.5 mm² for
digital signals. The signals can be measured easily
via the front screws. The screw flanges also ensure a
secure mounting even in rugged environments.
SV 51/xx
General
Pitch
5.08 mm
Numbers of pins
2, 3, 7, 16
Rated current
Up to 12 A with 2.5 mm²
Rated voltage
250 V
Rated voltage (III/2)
320 V
Color
Green
Contact surface
Tin, lead-free
Flammability class
acc. to UL94
V0
Fixing
Side screw flange M2.5
Labelling
On side with stickers
Conductors
Conductor cross-section rigid min.
0.2 mm²
Conductor cross-section rigid max.
2.5 mm²
Conductor cross-section flexible min.
0.25 mm²
Conductor cross-section flexible max.
2.5 mm²
Conductor cross-section, ferrule
with collar min.
0.25 mm²
Conductor cross-section, ferrule
with collar max.
2.5 mm²
AWG acc. to UL/cUL min.
24
AWG acc. to UL/cUL max.
12
Ferrules
Acc. to DIN 46228 T1 or T4, Form A
Stripping length and pin length
3.5 mm
Tools
Screw connection
Screwdriver, blade width ≤ 3.5 mm, thickness ≤ 0.6 mm
Screw terminal torque
0.5 to 0.6 Nm
Screw flange
Screwdriver, blade width ≤ 3.5 mm, thickness ≤ 0.6 mm
Screw flange
Torque max.
0.3 Nm
Test connection
No (can only be tapped via screw head)
137
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
SV 51/xx
Coding
Coding
Coding element »CP-MSTB« is inserted on the contact and matches the
unmounted coding element in the pin housing of the module. For details
see the section »Coding«
Approvals
UL / cUL
cULus Recognized, VDE
Manufacturer
Phoenix Contact
FRONT-MSTB 2,5/..-STF (.. =Number of poles, two-digit)
138
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
Coding
If several jacks of the same type and with the same number of pins are used for a module,
the jack coding can prevent a jack from being plugged into the incorrect socket. For this, the
jacks/sockets must be equipped with coding elements.
Coding elements (Overview)
Clip-on coding element
Plug-in coding element
CP-MSTB
Coding element
for R = 3.5 socket
for R = 5.08 pin header
for R = 7,62
socket and pin header
(SS 76)
CKF-SC1
CR-MSTB
CP-HCC 4
Coding 3.5 pitch plug connectors
Procedure:
1.
Insert plug-in coding element into socket.
2. Code the associated jack.
On the corresponding pin of the jack:
• If connector type 1, remove coding pin. This applies to all plug connectors with a 3.5 mm
pitch except the 3.5 pitch cage clamp terminals, narrow / KS 35/xx new type.
• With the 3.5 pitch cage clamp terminals, narrow / KS 35/xx new type the CKF-SC1 coding
element must be fitted.
139
 This way, this jack will only fit in this socket.
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
Coding 5.08 pitch plug connectors
Procedure:
1.
Insert clip-on coding element into pin header.
2.
Insert plug-in coding element into socket on the pins on which there is no coding
element in the pin header.
 This way, this jack will only fit in this socket.
Coding 7.62 pitch plug connectors (SS 76)
Procedure:
1.
Fitting the CP-HCC4 coding element in the socket.
2. The same CP-HCC4 coding element is fitted on the plug connector.
 This way, this jack will only fit in this socket.
140
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
Positioning
Positioning of the coding element depends on the number of pins and the number of jacks.
Number of Pins > Number of jack
If the number of pins is greater than the number of the same jack, it is sufficient when one
coding element is plugged in per socket:
Positioning - number of pins > number of jacks
Number of Pins < Number of jack
If the number of pins is smaller than the number of the same jack, then coding must occur
in binary fashion:
Positioning - number of pins < number of jacks
141
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
Terminal Sets Overview
Item
Item no.
Description
KZ 51/02 B
00012058-00
Terminal 02-pins pitch 5.08; cage clamp terminal with labeling strips
KZ 51/03 B
00012052-00
Terminal 03-pins pitch 5.08; cage clamp terminal with labeling strips
KZ 51/03 B+C
00012052-50
Terminal 03-pins grid 5.08; cage clamp terminal with labeling strips
and coding elements for NT250/48
KZ 51/05 B
00013391-00
Terminal 05-pins pitch 5.08; cage clamp terminal with labeling strips
KZ-ACR222 B
00012056-30
Terminal set Phoenix cage clamp (1x KZ 51/02; 1x KZ 35/10) with
labeling strips
SS-AI202/SI B+C
00012354-50
Terminal set Phoenix screw side (2x SS 35/03) with labeling strips
and coding elements
KS-(AI204/SI //
AO204/SI) B+C
00024539-00
Terminal set cage clamp small (4x KS 35/03) with labeling strips
and coding elements
SS-AI204/SI B+C
00012353-50
Terminal set Phoenix screw side (4x SS 35/03) with labeling strips
and coding elements
KZ-AI204/1 B
00012053-30
Terminal set Phoenix cage clamp small (1x KZ 35/04) with labeling
strips
KS-AI204/2 B+C
00013155-50
Terminal set Phoenix cage clamp small (2x KS 35/04) with labeling
strips and coding elements
SS-AI204/2 B+C
00011979-50
Terminal set Phoenix screw side (2x SS 35/04) with labeling strips
and coding elements
KS-AI204/4 B+C
00013156-50
Terminal set Phoenix cage clamp small (4x KS 35/04) with labeling
strips and coding elements
SS-AI204/4 B+C
00012008-50
Terminal set Phoenix screw side (4x SS 35/04) with labeling strips
and coding elements
KZ-AI208/SI B+C*
00019091-00
Terminal set Phoenix cage clamp (8x KZ 35/03) with labeling strips
and coding elements  not for new developments
KS-AI208/SI B+C
00027409-00
Terminal set Phoenix cage clamp (8x KS 35/03) with labeling strips
and coding elements
KZ-AIC212 B+C
00014396-50
Terminal set Phoenix cage clamp (1x KZ 51/02; 4x KZ 35/12) with
labeling strips and coding elements
KZ-AIO202/SI B+C
00024831-00
Terminal set Phoenix cage clamp (2x KZ 35/05) with labeling strips
KZ-AIO204/SI B+C
00024832-00
Terminal set Phoenix cage clamp (4x KZ 35/05) with labeling strips
KZ-AIO208/SI B+C
00025859-00
Terminal set Phoenix cage clamp (8x KZ 35/05) with labeling strips
KS-AIO208 B+C
00023149-00
Terminal set cage clamp small (2 x KS 35/20; 1 x KZ 51/02) with
labeling strips and coding elements
KS-AIO216 B+C
00023148-00
Terminal set cage clamp small (4 x KS 35/20; 1 x KZ 51/02) with
labeling strips and coding elements
KS-AIO288 B+C**
00012598-50
Terminal set cage clamp small (4x KS 35/19; 1x KZ 51/03) with
labeling strips and coding elements  not for new developments
KZ-AIO288 B+C
00026125-00
Terminal set Phoenix cage clamp small (4x KZ 35/19; 1x KZ 51/03)
with labeling strips and coding elements
SS-AIO288 B+C
00012007-50
Terminal set Phoenix screw side (4x SS 35/19; 1x KZ 51/03) with
labeling strips and coding elements
SV-AIO288 B+C
00010864-50
Terminal set Phoenix screw (4x SS 35/19; 1x SV 51/03) with
labeling strips and coding elements
* Article will be discontinued and replaced by KS-AI208/SI B+C (00027409-00)
** Article will be discontinued and replaced by KZ-AIO288 B+C (00026125-00)
142
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
Terminal Sets Overview
Item
Item no.
Description
KZ-AO202 B+C
00011980-50
Terminal set Phoenix cage clamp (2x KZ 35/04) with labeling strips
and coding elements
SS-AO202/SI B+C
00012378-50
Terminal set Phoenix screw side (2x SS 35/03) with labeling strips
and coding elements
KS-(AI204/SI //
AO204/SI) B+C
00024539-00
Terminal set cage clamp small (4x KS 35/03) with labeling strip
and coding elements
SS-AO204/SI B+C
00012379-50
Terminal set Phoenix screw side (4x SS 35/03) with labeling strips
and coding elements
KS-AO208/I B+C
00012948-50
Terminal set Phoenix cage clamp small (4x KS 35/06; 1x KZ 51/02)
with labeling strips and coding elements
SS-AO208/I B+C
00012009-50
Terminal set Phoenix screw side (4x SS 35/06; 1x KZ 51/02) with
labeling strips and coding elements
KZ-CNT204 B
00012057-30
Terminal set Phoenix cage clamp (1x KZ 51/02; 1x KZ 51/12) with
labeling strips
SV-CNT204 B
00010869-50
Terminal set Phoenix screw front (1x SV 51/02; 1x SV 51/12) with
labeling strips
KZ-CPC210 B+C+D
00023591-00
Terminal set Phoenix cage clamp (1x KZ 51/03; 3x KS 35/16;
3x KS 35/20) with labeling strips + coding elements + DSUBConnector
KZ-DA2384-C B+C
00013832-50
Terminal set Phoenix cage clamp (8x KZ 51/12; 1x KZ 51/07; 4x
KZ 35/12; 4x KZ 35/03) with labeling strips and coding elements
KZ-DI216 B+C
00011973-50
Terminal set Phoenix cage clamp (3x KZ 51/10) with labeling strips
and coding elements
SV-DI216 B+C
00010866-50
Terminal set Phoenix screw frontside (2x SV 51/10) with labeling
strips and coding elements
KZ-DI232 B+C
00012004-50
Terminal set Phoenix cage clamp (3x KZ 51/12) with labeling strips
and coding elements
SV-DI232 B+C
00010867-50
Terminal set Phoenix screw frontside (2x SV 51/12) with labeling
strips and coding elements
KZ-DIO16-C B+C
00012011-50
Terminal set Phoenix cage clamp (1x KZ 51/07; 4x KZ 51/12) with
labeling strips and coding elements
KZ-DIO32-C B+C
00012012-50
Terminal set Phoenix cage clamp (1x KZ 51/07; 8x KZ 51/12) with
labeling strips and coding elements
KZ-DIO48-C B+C
00012013-50
Terminal set Phoenix cage clamp (1x KZ 51/07; 12x KZ 51/12)
with labeling strips and coding elements
KZ-DIO264-C B+C
00012014-50
Terminal set Phoenix cage clamp (1x KZ 51/03; 6x KZ 51/12) with
labeling strips and coding elements
KZ-DIO216 B+C
00011974-50
Terminal set Phoenix cage clamp (3x KZ 51/12; 1x KZ 51/02) with
labeling strips and coding elements
SV-DIO216 B+C
00012078-50
Terminal set Phoenix screw frontside (3x SV 51/12; 1x SV 51/02)
with labeling strips and coding elements
KZ-DIO216/4 B+C
00011975-50
Terminal set Phoenix cage clamp (3x KZ 51/12; 1x KZ 51/02) with
labeling strips and coding elements
143
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
Terminal Sets Overview
Item
Item no.
Description
KZ-DIO232 B+C
00013742-50
Terminal set Phoenix cage clamp (3x KZ 51/12) with labeling strips
and coding elements
SS-DIO232 B+C
00015816-00
Terminal set Phoenix screw frontside (3x SS 51/12) with labeling
strips and coding elements
KZ-DIO248 B+C
00011976-50
Terminal set Phoenix cage clamp (4x KZ 35/16) with labeling strips
and coding elements
SS-DIO248 B+C
00012539-50
Terminal set Phoenix screw side (4x SS 35/16) with labeling strips
and coding elements
KZ-DIO264 B+C
00011977-50
Terminal set Phoenix cage clamp (5x KZ 35/16) with labeling strips
and coding elements
KZ-DIO280 B+C
00011978-50
Terminal set Phoenix cage clamp (6x KZ 35/16) with labeling strips
and coding elements
SS-DIO280 B+C
00012538-50
Terminal set Phoenix screw side (6x SS 35/16) with labeling strips
and coding elements
KZ-DMS202 B
00012054-30
Terminal set Phoenix cage clamp (1x KZ 51/02; 1x KZ 35/03) with
labeling strips
KZ-DO216 B+C
00012005-50
Terminal set Phoenix cage clamp (3x KZ 51/10) with labeling strips
and coding elements
SV-DO216 B+C
00010865-50
Terminal set Phoenix screw frontside (2x SV 51/10) with labeling
strips and coding elements
KZ-DO232 B+C
00012006-50
Terminal set Phoenix cage clamp (3x KZ 51/12) with labeling strips
and coding elements
SV-DO232 B+C
00010868-50
Terminal set Phoenix screw frontside (2x SV 51/12) with labeling
strips and coding elements
KZ-DOR206B+C
00014760-00
Terminal set Phoenix cage clamp (3x KZ 51/06) with labeling strips
and coding elements
KS-GIO212 B+C
00023145-00
Terminal set cage clamp small (4 x KS 35/15; 1 x KZ 51/02) with
labeling strip and coding elements
SS-GM260 B
00023512-00
Terminal set Phoenix screw side (1x SS 76/11) with labeling strips
SS-GMP232 B+C*
00018860-00
Terminal set Phoenix cage clamp/screw (1x KZ 51/03; 1x KZ 51/06;
2x SS76/06) with labeling strips and coding elements
(up to KR 102.000)
SS-GMP232/x B
00027474-00
Terminal set Phoenix cage clamp/screw (1x SS 51/03; 1x SS 51/06;
1x SS 76/06, 1x SS 76/06 inv.) with labeling strips
(from KR 103.000)
KZ-GSP274 B
00023426-00
Terminal set Phoenix cage clamp/screw (1x KZ 51/03; 3x KZ
51/06; 2x SS76/10) with labeling strips
KZ-ISI222 B
00014277-30
Terminal set Phoenix cage clamp (1x KZ 51/02; 1x KZ 35/06; 1x
KZ 35/07; 1x KZ 35/02) with labeling strips
KZ-ISI222 B+D
00014277-70
Terminal set Phoenix cage clamp (1x KZ 51/02; 1x KZ 35/06; 1x
KZ 35/07; 1x KZ 35/02) with labeling strips + DSUB-Connector
KS-PTAI216 B+C**
00012599-50
Terminal set cage clamp small (1x KZ 51/02; 4x KS 35/14) with
labeling strips and coding elements  not for new developments
KZ-PTAI216 B+C
00026126-00
Terminal set Phoenix cage clamp small (1x KZ 51/02; 4x KZ 35/14)
with labeling strips and coding elements
From KR 103.000 use the terminal set SS-GMP232/x B (00027474-00) (inverted current
measurement point)
** Article will be discontinued and replaced by KZ-PTAI216 B+C (00026126-00)
*
144
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Accessories
Terminal Sets Overview
Item
Item no.
Description
SS-PTAI216 B+C
00012010-50
Terminal set Phoenix screw side (1x KZ 51/02; 4x SS 35/14) with
labeling strips and coding elements
SV-PTAI216 B+C
00010870-50
Terminal set Phoenix screw frontside (1x SV 51/02; 4x SS 35/14)
with labeling strips and coding elements
KZ-SCT202 B+C
00027026-00
Terminal set Phoenix cage clamp (1x KZ 51/03; 2x KZ 35/07) with
labeling strips and coding elements
KZ-SDI208 B+C
00014774-50
Terminal set Phoenix cage clamp (1x KZ 51/05; 2x KZ 35/12) with
labeling strips and coding elements
KZ-SDO204 B+C
00014772-50
Terminal set Phoenix cage clamp (1x KZ 51/05; 2x KZ 35/08) with
labeling strips and coding elements
KZ-SLC284 B+C
00014771-50
Terminal set Phoenix cage clamp (1x KZ 51/05; 6x KZ 35/08) with
labeling strips and coding elements
KZ-TCO204-C B+C
00012022-30
Terminal set Phoenix cage clamp (1x KZ 51/03; 1x KZ 51/13; 1x
KZ 35/12) with labeling strips and coding elements
KZ-TCO216-C B+C
00012015-50
Terminal set Phoenix cage clamp (1x KZ 51/03; 2x KZ 51/13; 4x
KZ 35/12) with labeling strips and coding elements
KS-TI214 B+C
00014432-50
Terminal set cage clamp small (1x KZ 51/02; 2x KS 35/16; 2x KS
35/12) with labeling strips and coding elements
SS-TI214 B+C
00014395-50
Terminal set Phoenix screw side (1x SS 51/02; 2x SS 35/16; 2x SS
35/12) with labeling strips and coding elements
KZ-VP200 B+C
00012017-50
Terminal set Phoenix cage clamp (2x KZ 51/16; 2x KZ 51/07) with
labeling strips and coding elements
145
System Overview • Bachmann electronic GmbH • 02/2016 • Specification subject to change –
the product’s characteristics are exclusively governed by the data of the respective user manual.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement