INSTRUCTION MANUAL

STEAM IRON

LI1060AS

Please read these instructions manual carefully before using the appliance

Dear Customer

Congratulations on being the proud owner of Lloyd Steam

Iron. Your Steam Iron comes with a Lloyd Guarantee of

Quality.

Lloyd takes great pride in providing its customers with perfect products that adheres to international quality standards.

Lloyd is committed to provide the ultimate customer satisfaction as nothing brings us greater joy than having satisfied customers of Lloyd.

At Lloyd, feedback and suggestions based on your product usage experience are greatly appreciated.

Please feel free to contact us at [email protected]

NIPUN SINGHAL

DIRECTOR

Attention:

* Please read the owner’s manual before using the product.

* Before using, please check the voltage of the product if it is the same with the one in your home.

* When using steam ironing and self cleaning function, you are recommended to use distilled water.

* The water will leak from the soleplate if using ironing with steam but temperature below level * * . Please note, its a normal phenomenon.

* During the iron is electrified, operator must not leave, and let children not touch the iron.

*

* After using, turn the steam knob to “ ”, turn the temperature regulating knob to “0”, pull out the plug, put the iron on the smooth and stable place vertically.

* If the supply cord is damaged, it must be replaced by the service personnel in order to avoid a hazard.

* The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.

* The iron must be used and placed on a stable surface.

* When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.

* Children should be supervised to ensure that they do not play with the appliance.

Main features:

The product has many functions such as Temperature Regulation, Water

Spray, Dry Ironing, Steam Function, Burst of Steam Function etc. and has an aesthetic shape and appeal.

A: Steam Regulation Knob

B: Spray button

C: Indicator bulb

D: 360 Degree Rotation Chord

E: Temperature Adjustment Knob

F: Water tank

G:Non-Stick Soleplate

H: Spray Nozzle

I

J: Self-Clean button

Technical information:

1. High Precision Temperature Control: With the high precision temperature control knob, the user can adjust the temperature of the heating plate as per the material of clothes to be ironed.

2. Thermal Fuse Protection: The iron bears an inbuilt thermal protector which cuts of the power supply when the temperature exceeds a certain temperature so as to avoid any possible hazard. The user can have the fuse replaced by a authorized service personnel in such a case.

Method of Operation

Steam Ironing:

1. Use suitable container to fill the water tank.

2. Turn the temperature adjusting knob to the “0” position, and ensure that the iron is on a smooth and stable surface, placed vertically. Then put the plug into the socket and adjust the temperature adjusting knob on or above * level according to your fabric material needs . The temperature below * level is for dry ironing only.

3. After about 1.5 to 3 minutes, the indicator will turn off, when the indicator turn on again, your can start ironing with steam.

4. Adjust the Steam Regulation Knob to place and the steam will be released. If you want to stop, just adjust Steam regulating

Knob to place.

5. You also could press Steam Burst Button and a burst of steam will be released from soleplate (it could be used in a vertical or a

6. You can use the iron for vertical ironing as well.

.

.

7. If you need some water on the clothes for easy ironing, you could press

Spray button, and some water will come out from spraying mouth

8. If steam doesn’t come out of the sole plate, it means there is no water in the water tank now. At this moment, you must adjust Steam regulating

Knob to ” ” place. If you want it to work on with steam ironing, pull out the plug , then the socket. Then you can continue to use it.

. Put the plug into

9. After ironing is complete, turn the temperature regulation knob to “0” position, pull the plug out of the socket, then pour the water out.

turn the temperature regulation knob to the “0” position. Put the plug into the socket again and adjust the steam regulating knob to

place

, till no water inside. This process will prevent scale formation and damaging the box from left over water.

Correct fabric ironing

Attention:

1. Heat sensitive clothes ironing, please cover a piece of cloth on the ing, otherwise the clothes will be burnt.

2. Different material ironing, please adjust temperature according to the heat resistant of the material.

Cloth material

Nylon

Temperature Marks in Preferable ironing method setting

*

clothes

Ironing the back of clothes without any water or cover a

Synthetic fabric or Silk

* piece of cloth on the goods you want to iron

Dry ironing the back of the clothes

Wool

Cotton

Linen

**

***

MAX

According to the thickness and gauffer to iron with steam. For some fuscous clothes, we would better adopt to back ironing.

Correct ironing with steam

Before using, please read the items as follow:

1. Fill in cold boiled water or pure water.

2. According to fabric material, adjust the temperature. If you are not familiar with the cloth material, you may choose a piece for testing and adjust the temperature accordingly.

3. When the soleplate reaches its adjusted temperature, the indicated light turns off, then you can start ironing.

4. Use the steam burst function to recover the elasticity of the fabric. Rub and press the polished cloth, then it will come back. If burst steam to

function is used to the opposite side of the cloth at the same time,

the effect will be better.

5. Do not put the ironed clothes into wardrobe immediately. Hang the clothes to clothes rack till it is cold.

6. After ironing, pour out the rest water . If some water left in the water tank, put the plug into the socket for dry ironing for a while. You can pull the plug out till you make sure no water in it.

7. Keep the iron upright. And the life of the iron can be longer.

Troubleshooting

Inspection

Water tank Temperature part adjusting knob

Failure

No steam

*

Steam bore power supply

* *

Little steam

* *

Heating body power

*

*

Can not heat up

* *

Cloth burnt and shrink

Water drop from the steam bore

*

* water tank without water

Temperature adjusting knob in the correct position or not, choose a right temperature,

Clean out dirts from steam bore check the indicator light is working or not, and power supply correctly

Check if the indicator light is on