Rosewill RSCM 15701W SmartCam Quick Start Guide

Rosewill RSCM 15701W SmartCam Quick Start Guide

Below you will find brief information for SmartCam RSCM-15701W. The SmartCam RSCM-15701W is a security camera that can be used to monitor your home or business. This camera can be accessed remotely via a smartphone or computer. The camera can be used to record video and take pictures. The camera can also be set to trigger an alarm when motion is detected.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Rosewill SmartCam RSCM-15701W Quick Start Guide | Manualzz
SHIELDeye SmartCam USER MANUAL
Limited Warranty Terms & Conditions
Rosewill Limited warrants this product against defects in workmanship and material for a period of one (1)
year from its original purchase date. You must present your receipt as proof of date of purchase for warranty
validation. Any unit which proves defective during the stated period will be repaired without charge for parts
or labor or be replaced at the sole discretion of Rosewill. The end user is responsible for all freight charges
incurred to send the product to Rosewill’s repair centers. The end user is responsible for all shipping costs
incurred when shipping outside the country of origin.
This warranty does not cover any incidental, accidental, or consequential damages arising from the use of
or the inability to use this product. Any costs associated with the fitting or removal of this product by a
tradesman or other person or any other costs associated with its use are the responsibility of the end user.
This warranty applies only to the original purchaser of the product and is not transferable to any third party.
Unauthorized end user or third party modifications to any component or evidence of misuse or abuse of the
device will render all warranties void.
By law, some countries do not allow limitations on certain exclusions in this warranty. Where applicable by
local laws, regulations and legal rights will take precedence.
FCC Verification
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and radiates radio
frequency energy and, if not installed and used according to instructions, may cause harmful interference to
radio or television reception, which can be determined by turning that equipment off and on. The user is
encouraged to try to correct the interference by one or more of the following measures:




Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver
Connect the equipment into an outlet on a circuit different than the receiver is connected
Consult the dealer or an experienced radio / TV technician for help
These devices comply with Part 15 of the FCC Rules. Operation is subject to the following two (2)
conditions:


These devices might not cause harmful interference, and
These devices must accept any interference received, including interference that might cause
undesired operation.
Important Note
All jurisdictions have specific laws and regulations regarding to the use of Cameras. Before using any
Camera for any purpose, it is the buyer’s responsibility to be aware of all applicable laws and regulations
that prohibit or limit the use of Cameras and to comply with those laws and regulations.
WARNING
Modifications not approved by the party responsible for compliance could void user’s authority to operate
the equipment.
IMPORTANT SAFETY INSTRUCTIONS
Make sure the Camera is correctly secured if affixed to a permanent place.
Do not operate if wires and electrical components are exposed.
2
SHIELDeye SmartCam USER MANUAL
TABLE OF CONTENTS
Congratulations ........................................................................................................ 5
IP (Internet Protocol) Camera Information ............................................................. 5
•
Camera Details .................................................................................................... 5
•
Package Contents ............................................................................................... 6
•
Before You Install ................................................................................................ 6
Setting Up Your Camera .......................................................................................... 7
Connecting to a LAN (using a Network Cable) ...................................................... 7
Installing SHIELDeye SOFTWARE .............................................................................. 5
•
Default Username and Password.......................................................................................... 8
Understanding the “LiveWatch” Interface ............................................................. 9
Using Add Device Mode........................................................................................... 9
Setting Up “Video” ............................................................................................................................ 11
•
Basic Camera Controls .................................................................................... 11
•
Local Menu Setup ............................................................................................. 12
•
Camera WiFi Setup ........................................................................................... 13
•
Connecting Through PC & Web Interface ....................................................... 13
Connecting by iPhone or Android Smartphone .................................................. 16
•
Installing SHIELDeye .................................................................................................................16
•
Running the SHIELDeye App ........................................................................... 16
•
Understanding the SHIELDeye App ................................................................ 17
•
Viewing videos on your IP camera by smartphones...................................... 18
•
Setting up the SHIELDeye App ........................................................................ 19
3
SHIELDeye SmartCam USER MANUAL
•
Adding a Camera via Smartphone................................................................... 19
•
Indroducing SHIELDeye App ......................................................................... 20
•
Advanced Settings............................................................................................ 21
Opening a Web Browser ........................................................................................ 23
•
The “LiveWatch” UI........................................................................................... 23
•
Media Settings................................................................................................... 24
•
Image Settings .................................................................................................. 25
•
Alarm Trigger Settings ..................................................................................... 25
•
Motion Detection ............................................................................................... 26
•
Alarm Notification ............................................................................................. 26
•
Scheduling ........................................................................................................ 27
•
E-mail Settings .................................................................................................. 27
Appendix ................................................................................................................. 28
•
Connecting to a WAN ....................................................................................... 28
Technical Support .................................................................................................. 28
4
SHIELDeye SmartCam USER MANUAL
Congratulations
Congratulations on your purchase of our SHIELD HD Day & Night IP Camera. With this IP
(Internet Protocol) Camera, you can monitor your home day and night, watch your children, and
keep an eye on pets at every moment. You can also interact with your family anytime by the
remote online smartphone speaker and view feature. With the easy set up process, you can install
and program your IP Camera by yourself simply and quickly. It is powerful yet suitable for homes,
businesses, offices, and any areas that need discreet monitoring.
Note: To better this Camera, we will keep improving the software and user manuals. Therefore, if
you find this user manual does not match the IP Camera, please download the latest files at
www.rosewill.com.
IP (Internet Protocol) Camera Information
Camera Details
2
6
1
5
3
12
7
9
8
10
4
11
1. Infrared LEDs: Illuminates targeted areas
when in almost total darkness.
6. Network (LAN) Port: Connect an Ethernet
cable to a Wi-Fi router.
2. Microphone: Acts as “ears” to hear sounds
and interact with other, nearby Cameras.
7. Internal Antenna
3. Illumination Sensor: Detects light level and
powers the IR (infra-red) LEDs for night vision.
8. Work Status LED
9. Reset Button: 5-Second Press+Hold will reset
all settings back to the factory defaults.
4. Speaker: Acts as your “mouthpiece” With this
Camera, you can talk via your mobile device
and your voice will be heard on the speakers
on the Camera.
10. Network LED: Blinks when the camera and
network are connected.
5. Micro SD: Easy-access card slot. Up to 32
GB.
12. DC 5V: Power source port.
11. Power Status LED
5
SHIELDeye SmartCam USER MANUAL
Package Contents
What’s in the Box
1 pc IP Shield
Security Camera
1 pc Software CD
1 pc Ethernet
Network Cable
1 pc 5V Power Cable
1 pc Mounting
Bracket
1 pc User Manual
If any of the items are missing, please contact your vendor.
Before You Install
In order to install your Camera successfully, please make sure you have the following:
• An Internet connection
• A wireless router connected to your broadband modem
• A computer operating Windows® XP/Vista/7/8 with Internet Explorer® 6 or higher and ActiveX® controls
enabled
6
SHIELDeye SmartCam USER MANUAL
Setting Up Your Camera
Connecting to a LAN (using a Network Cable)
The network cable and DC 5V power cable
that are needed for these instructions are
included with your Camera. Please get
them from the package contents and have
them ready.
1. Connect the DC 5V power cable to
the Camera’s DC 5V port and plug
the cable to the electrical outlet.
2. Connect the Camera’s Network LAN
port to any available LAN port on your
wireless router. Use the supplied
network Ethernet cable.
3. Connect the computer to any LAN
port on the wireless router.
You can either use this computer to
configure the Camera or to access
the Camera, or to do both
7
SHIELDeye SmartCam USER MANUAL
Installing SHIELDeye Software
SHIELDeye is an easy way for users to set up and control the Camera that is connected on your
home network via your computer. SHIELDeye allows you to connect multiple IP Cameras and
simultaneously record and playback immediately recorded videos while your current recordings
continue uninterrupted.
• A mobile app version of this software is also available for Android and iPhone smartphones. The
SHIELDeye app can be downloaded for free from the Apple App Store or see “Connecting by
iPhone or Android Smartphone”on page 16 for more details.
Windows Users
1.
Insert the CD into your PC and follow the on-screen prompts to install the software. At this
time, we suggest you open the user manual for the following instructions.
2.
If prompts didn’t show up, access it from My Computer > CD/DVD drive> amplayer file and
run the software directly.
After installation, the SHIELDeye icon will appear on your desktop.
3.
Click the icon to start the PC monitoring software to view and record from
Camera and other functions.
your
Note: Startup via smartphone may not provide all the functions of the IP Camera, but it’s easier and
provides enough functions that users can view via their mobile devices.
Default Username and Password
Username: admin
Password: 123456
8
SHIELDeye SmartCam USER MANUAL
Understanding the “LiveWatch” Interface
This software interface acts as your virtual eyes and allows you to control and adjust the Camera
settings on site or from other time zones.
Launch SHIELDeye, and the LiveWatch software UI (User Interface) will open. See below.
This Camera software allows you to connect up to 16 Cameras, record videos and take snapshots,
configure Wi-Fi settings, and has 2-way audio remote conversation. Hover your mouse over each
feature for a detailed explanation.
Using Add Device Mode
LiveWatch Grid with Camera List
QR Code with DID
NOTE: Before adding Camera, 1. Find the QR sticker on the bottom of the Camera, 2. Write down
the DID code. 3. Click the button
. It displays the Add Device Mode window.
There are two ways to add a Camera (referred to as a “device”).
Search to Add
1. Click Search to Add button.
2. In Device Type, Choose Smart P2P and Click Search.
The name of the corresponding Camera will appear.
3. Enter the DID: (number that follows DID: xxxx) and Enter default password and
4. Click Save. The Camera will be linked by entering the DID. The DID will then be saved and
stored in Camera List.
Manually Add
1. Select Add device manually to edit device information.
2. Find your Camera.
3. Edit device information. NOTE: Textboxes with an asterisk (*) must be filled out. (We suggest
logically naming your Camera(s) for easy identification in the Camera list.)
When the first Camera is added, it will occupy the first row. When another Camera is added, it
will occupy the second row in the list. As Cameras are added, they will appear in their
corresponding order on the camera list.
4. Double click the Camera name to start watching live video on the corresponding channel.
9
SHIELDeye SmartCam USER MANUAL
“Add Device Mode” Screenshots
1
1. Click “Search to Add” button
(recommended choice).
2. In Device Type, Select
“Smart P2P”. Click Search.
3. Enter the default
Account: admin; Password: 123456
4. Click Save.
Make sure box with * are
filled out and Click Save.
3
4
The Camera you just
added shows here.
10
SHIELDeye SmartCam USER MANUAL
Setting Up Video
This section details how to set up your Camera(s).
Right click Play Video or
Double click the Camera to
start the video.
Basic Camera Controls
You can control the image, audio and other options while you are watching the video via the functions
below.
Speaking
Listening
Snapshot
Record and status display
record manually;
scheduled record
Image Setting
You can control resolution and brightness/contrast
Note: If the video doesn’t run
smoothly due to bandwidth
restrictions, you can lower the
resolution for better streaming.
11
SHIELDeye SmartCam USER MANUAL
Local Menu Setup
Play All Devices in the List
Stop All Devices in the List
Eyeplayer is video playback
Multiple Image Window
Device Log records video history
Full Screen Mode
System Setting
Trigger Alarm
Three (3) setting options
that activate only during
motion detection.
Play Automatically After Reboot
Auto-connect and play the
Cameras in device list after the
software is rebooted.
File Browse
Select where to save videos.
Record Plan Create a
customized recording
schedule. See “Recording
Strategy.”
12
SHIELDeye SmartCam USER MANUAL
Camera WiFi Setup
So, you have successfully installed the Camera and have been able to view what you want over the network,
but now you want to avoid the cable running down the hallway. You could set up your IP Camera wirelessly!
Before start your wireless setup, please check that your wireless router works, and remember to connect
your router, desktop and the IP Camera according to page 6. There are two ways to create your wireless
connection.
Note: Wireless viewing only works if your wireless network locates the IP Camera. If the wireless signal is
weak, the video may be disruptive. To ensure a strong signal and reception, we suggest you connect using
the Ethernet network cable.
Connecting Through PC & Web Interface
To set up this wireless connection, you need to enter the Web Interface. To get into the Web Interface, you
need to know the IP address of your IP Camera. Follow these steps to get the IP address.
1. Find SearchTool.exe in the Installation CD.
2. Double click SearchTool.exe and you will see the image below.
3. Click Search and you can see the IP address of your device in the device list, and write down the IP
address for further setup.
2. Address IP
Find the Address IP and write it
down. (It is after the Device Name)
Http Port 80
1. Click Search to get the IP
address of the IP Camera.
13
SHIELDeye SmartCam USER MANUAL
4. Open your Internet browser and type the IP address into the browser bar. This will take you into the Web
Interface. Choose your language and browser to enter.
↓
2. Enter the IP address you recorded in
step 3.
Note: If you changed the port# (80 is
default), be sure to add at the end of the IP
address
EX: 192.168.0.198:port#
5. Click Setup to enter your Network
Configuration settings.
5. Click Setup to take you to the Network Configuration page. After entering the Setup, click Network on
the left.
14
SHIELDeye SmartCam USER MANUAL
6. You can either choose Dynamic IP Address to enable DHCP protocol or Fixed IP Address (a static IP
that you manually input. This IP address is provided by your ISP. Also input the HTTP Port (as shown),
RTSP Port: 554 as default.
6. Select your network configuration. Choose Dynamic
IP Address to use the DHCP protocol. Choose Fixed
IP Address (Static IP). Enter the IP address provided
by your ISP and HTTP Port as shown below.
7. Select WiFi to connect the IP Camera by Search.
Enter the password of the WiFi into Key. Click Apply.
8. Click Check to test the wireless set.
NOTE: 1. When the device is connected by both WiFi and wired LAN, it will connect to the wired network
first.
2. If users enable Dynamic IP Address and use DHCP to obtain IP address automatically, the IP
address will change when the router restarts. This could cause wireless failure.
We recommend using Static IP and DDNS settings to avoid this loss.
15
SHIELDeye SmartCam USER MANUAL
Connecting by iPhone or Android Smartphone
Go to the Apple App Store or Google Play, search for SHIELDeye, and download it for free. Start watching
live Camera videos from your mobile device.
Make sure you download the latest version of the SHIELDeye app. The following images are captured from
the iOS version of the mobile app. You may notice a slight layout difference in the Android version of the
app, but otherwise they both behave in the same manner. Newer app versions may be released since the
printing of this manual.
Installing SHIELDeye
App Store
1. Go to Apple Store or Google Play Store.
2. Search SHIELDeye. (Type the entire “SHIELDeye” to get the best result.)
3. Tap to download the free application.
QR Code
1. Take your smartphone and Scan the QR code on the bottom of the IP Camera.
2. Follow the prompts. Remember the default username: “admin” and password: “123456”.
Running the SHIELDeye App
16
SHIELDeye SmartCam USER MANUAL
Understanding the SHIELDeye App
1. Camera: View Camera list and some Camera functions.
2. Pictures: View snapshots taken by the phone from the video feed.
3. Records: View video feed and storage card in remote Camera.
4. About: Check the installed app version.
7
6
5. Add: Add new Cameras.
6. Delete: Delete the Cameras from the Camera list.
5
1
7. Grid: Multiple viewing screens (up to 4 channels).
2
3
4
17
SHIELDeye SmartCam USER MANUAL
Viewing videos on your IP camera by smartphones
Before using the Recorder function, please confirm the "P2P Build Time" updated to 2015-01-02 through
the Web interface.
1. Tap Records and you can view the videos on your mobile
devices under Local, and view the videos in the TF card
(microSD Card) of the camera under Remote.
And click the name of the camera to enter.
2. The videos will appear by the latest time. You
can also filter the videos by dates by clicking
.
18
SHIELDeye SmartCam USER MANUAL
Setting Up the SHIELDeye App
Before operating your Camera(s) with your smartphone, you must first register the Camera(s) with the app.
Adding a Camera via Smartphone
There are three (3) methods to add Cameras:
(1) Search Camera in LAN (2) Scan ID
1
(3) Add Manually
1. SEARCH. Use When Phone and IP Camera are
Connected to Same WiFi Network. Click Search.
Tap the DID of the Camera and Finish according to
steps 4 and 5.
Note if you have more than one Camera in your
network, set each one up separately.
2. SCAN. Use When Phone and IP Camera are
Connected to Different WiFi Networks. Simply tap
Scan ID, use your smartphone’s Camera to scan the
QR code sticker you will find on the bottom of the
Camera. This automatically populates the DID box
with the Camera’s DID. Then just follow steps 4 and
5 to complete.
3. MANUAL. Use When You Prefer to Add the IP
Camera Manually. Tap in the boxes and type the
2
Camera’s DID in the DID box carefully. NOTE: The
DID is case sensitive.
Enter the Camera’s password (default is 123456 but
we recommend you change this using the software on
your PC as soon as possible).
Tap the Name box and create a logical name to help
identify it easily. When you’re finished, tap back to
the Camera List screen.
SCAN
QR Code Sample
Limitations of SHIELDeye App - you can’t record videos and there is no split screen display. For these, you
have to use the Windows software.
19
SHIELDeye SmartCam USER MANUAL
Introducing SHIELDeye App
PTZ setting
Snapshot
Record
Listen
Flip
Talk
Contrast
Brightness
Mirror
Default
Resolution
Setting
Quit
Anamorphic
NOTE: Default may
NOTE: If the video lags, we
distort the video. If it
suggest you to change the
needs adjustment,
resolution to QVGA for
please adjust through
smooth video.
Contrast.
20
SHIELDeye SmartCam USER MANUAL
Advanced Settings
Camera Settings
WiFi Setting
This is the main screen for accessing
Search for an available WiFi SSID
connection to link the phone and IP
Camera.
various Camera and software settings.
User Setting
Configure accounts with usernames and
passwords.
Time Setting
Calibrate the Camera’s local time and time
zone.
21
SHIELDeye SmartCam USER MANUAL
Alarm Setting
Adjust Motion Detect settings and other
actions and notifications here.
Mail Setting
Set up email accounts of the sender and
receiver here before using mail alarm.
FTP Setting
Input and store server and port
information here. (You must have
information on-hand before you start.)
SDCard Setting
Find out how much storage is remaining
in your memory card. Get information
from the Camera’s SD card here.
22
SHIELDeye SmartCam USER MANUAL
Opening a Web Browser
Open a Web browser such as Internet Explorer (IE), Chrome, Firefox or Safari and type the Camera’s IP
address into the address bar. Make sure your Camera is connected to the network, otherwise nothing will
show
 To find the IP address, you can use the SearchTool_en.exe in the CD to find it.

If you’re using IE and connecting to a Camera for the first time, you will need to download and install a
plug-in. The IE browser plug-in is quite small and installation is fast. Your operating system and/or
virus protection program may ask you for permission to run the file. Select the relevant options
available to complete installation. Restart your browser after installation.
The “LiveWatch” UI
The LiveWatch UI on the Web browser is almost identical to the SHIELDeye software on the computer. New
versions can create slight changes, but it operates the same. Some additional features such as vertical &
horizontal patrolling are added.
Press to Take Pictures
Click to Record Videos
Click to View SD Card
Click to View Recordings
Click for Advanced Settings
Back to Home Page
23
SHIELDeye SmartCam USER MANUAL
Media Settings
Video Settings
We recommend using 60Hz for a stable frequency.
Higher Bit Rate provides higher video resolution, but it also
takes more bandwidth. Please set according to your
network and storage recording size.
Higher Frame Rate shows better videos but need larger
storage.
Information captured on images when on.
Audio Settings
Audio Quality
G.711: Better but more bandwidth
G.726: Ok with less bandwidth
24
SHIELDeye SmartCam USER MANUAL
Image Settings
:
Double click to full screen
:
Long click to control the angle of Camera
Alarm Setting
The Camera can be equipped with external alarm devices. Connect
an external alarm detector to the input port, and the detector will
send the signal when it detects any motion. You can set the alarm
to activate by different motion levels.
25
SHIELDeye SmartCam USER MANUAL
Motion Detection
This size and position of the detection
windows can be customized.
The alarm will trigger when motion occurs any of the windows.
1. Check the Window1 through Window4 checkboxes.
2. Select the Sensitivity value. (The higher value, the more sensitive it is.)
3. Click Apply, and motion detection starts to work.
Alarm Notification Settings
When the Camera detects motion, it will trigger the alarm in several options.
Save or notification you want
FTP server setting
Duration to open external alarm
Email setting (SMTP)
When the alarm is triggered, the Camera
will return to the preset angle.
26
SHIELDeye SmartCam USER MANUAL
Schedule Settings
You can schedule the alarm to be set only during certain times.
1. Click the corresponding day and time boxes. The boxes will become green when they are active.
2. Click Apply.
Note: Please make sure your system time is correct before you set the alarm schedule.
E-mail Settings
Follow these instructions to send email notification
SMTP server name: This is the mail
server you desire to receive alert from.
We strongly suggest you to input gmail
(”smtp.gmail.com”) while others may
be easy to fail the settings. Please fill all
boxes which we filled as left.
After completing it, click Test to test if
the E-mail setting works. Then, click
Apply to save settings.
27
SHIELDeye SmartCam USER MANUAL
Appendix
Connecting to a WAN
Using a WAN to connect the IP Camera to your desktop or notebook is one more way to provide flexible
coverage. Instructions take place on your router, so settings and wordings will differ depending on wireless
router models. If users only intend to view by smartphones or other mobile devices, we suggest users to
follow instructions for mobile apps.
If you want to use the IP Camera on a desktop or laptop outside your local network, you must perform “port
forwarding” on your router.
Open your desktop or laptop you’ll be using away from home. Find and Launch your router software.
Get into your router settings by clicking default gateway in the address box.
Note: Different routers might have different interface displays, so the settings might be different. Please
refer to the user manual of your router or consult with the router manufacturer.
2
1
1.
Enter the advanced settings of your router, and Click on Port Forwarding (or Port Mapping/ Port
Triggering) to enter Virtual Server. (For some routers, you can just choose Port Forwarding and
start Step 2 below.)
2.
Please designate the Service Port and Internal Port the same as Http port of your IP Camera.
Then enter the IP Address of your IP Camera to IP address box. Please refer to earlier in this book,
or you can use SearchTool.exe
3.
Finish all the settings, and click Save. Now, you can visit the IP Camera via WAN by
xxx.xxx.xxx.xxx:Port# ( IP address: port#).
Technical Support
SHIELDeye Technical Support
Global E-mail: [email protected] / http://www.rosewill.com
28

advertisement

Key Features

  • Remote access via smartphone or computer
  • Real-time video and audio streaming
  • Motion detection with alarm trigger
  • Night vision
  • Two-way audio
  • SD card recording
  • Easy setup and installation

Frequently Answers and Questions

How do I connect the camera to my Wi-Fi network?
You can connect the camera to your Wi-Fi network using the SHIELDeye software on your computer or the SHIELDeye app on your smartphone. Refer to the user manual for detailed instructions.
How do I view live video from the camera on my smartphone?
You can view live video from the camera on your smartphone by downloading the SHIELDeye app and following the instructions on how to add the camera. Ensure that your smartphone and the camera are connected to the same Wi-Fi network or use the QR code on the camera to easily pair it.
How do I set up motion detection?
You can set up motion detection through the SHIELDeye software or app. Choose the areas you want to monitor, adjust sensitivity levels, and set up notifications for when motion is detected.
What is the maximum storage capacity of the SD card?
The camera supports an SD card with a maximum storage capacity of 32GB.
Can I use the camera outdoors?
The camera is not weatherproof. It is recommended to use the camera indoors.

Related manuals

Download PDF

advertisement