Sharp 25L-M180 Operating instructions

Sharp 25L-M180 Operating instructions
model
25N-M180
CONTENTS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Page
Important Information ................................ 2 - 3
Important Safeguards ............................... 3 - 4
Supplied Accessories ..................................... 5
Before Operating Your Television .................. 5
Antenna Connections ............................... 6 - 7
Quick Reference Control Operation ........ 8 - 10
EZ SETUP during First Power On ............... 11
Demo Mode ................................................. 12
Accessing Main Menu Without Remote ....... 12
Language ..................................................... 12
Sleep Timer .................................................. 13
Video Adjust .......................................... 13 - 14
Closed Caption ..................................... 14 - 15
Parent Control ....................................... 15 - 25
• V-chip ................................................. 15 - 22
• View Timer ......................................... 23 - 25
Page
• Energy Save ................................................ 25
• Set Up ................................................... 26 - 31
• EZ Setup ................................................... 26
• Channel Setting ................................. 27 - 29
• Blue Screen .............................................. 29
• Personal Preference ................................. 30
• Universal Plus Function ............................ 31
• Using the Video and Audio Input Jacks ....... 32
• Operation of Remote Control ................ 33 - 36
• Before Calling for Service ..................... 37 - 38
• Calling for Service ........................................ 37
• Limited Warranty .......................................... 39
This operating manual includes basic
operating instructions in Spanish and French.
SPANISH is on page 9, 38.
FRENCH is on page 10.
As an ENERGY STAR® Partner, SHARP has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered
trademark.
01-06/25N-M180 w/Imp. Safe
6929 ME
1
6/1/00, 10:09 AM
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
IMPORTANT
To aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
Model No.:
Serial No.:
Important Information
There are two important reasons for prompt warranty registration of your new SHARP television set,
using the REGISTRATION CARD packed in with the set.
FIRST – WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor
warranty applicable to your purchase.
SECOND – CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification or recall that
SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ
CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.
WHAT IS ENERGY STAR®
TVs and VCRs use energy both when they are on and when they are off. Americans spend more than
$1 billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY
STAR® models will reduce that energy “leakage” by up to 75 percent. Ultimately, this will mean more
than $500 million a year in energy savings for consumers.
The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution
that contributes to global warming. If every American family replaced their TVs and VCRs with ENERGY
STAR® models, it would reduce carbon dioxide emissions by five million tons every year — equivalent to
eliminating the pollution from more than one million cars.
By using ENERGY STAR® products, you will save money on your electric bills and use less energy. That
makes good economic sense and it’s good for our environment.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.”
2
01-06/25N-M180 w/Imp. Safe
2
6/1/00, 10:09 AM
Important Information (Continued)
WARNING - FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user’s authority
to operate this equipment.
Important Safeguards
CAUTION: Please read all of these instructions before you operate your television and save
these intructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to
assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK
OR FIRE HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the
following basic rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may
cause hazards.
4. Do not use this television equipment near water — for example, near a bathtub, washbowl, kitchen sink
or laundry tub, in a wet basement, or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall,
causing serious injury to a child or an adult, and serious damage to the equipment. Use only with a
cart or stand recommended by the manufacturer or sold with the television equipment.
6. Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination
to overturn.
7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use
a mounting kit approved by the manufacturer.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure
reliable operation of the television equipment and to protect it from overheating, these openings must
not be blocked or covered. This television equipment should not be placed in a built-in insulation such
as a bookcase unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should
not be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This
television equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your home, consult your television
dealer or local power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade
bigger than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and
defeat this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord
will be abused by persons walking on it.
13. Follow all warnings and instructions marked on the television equipment.
3
01-06/25N-M180 w/Imp. Safe
3
6/1/00, 10:09 AM
Important Safeguards (Continued)
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of
the National Electrical Code provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
ACCORDING TO NATIONAL ELECTRICAL CODE.
ANTENNA LEAD-IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC PART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
15. For added protection for this television equipment during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This
will prevent damage to the equipment due to lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. If the television equipment does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance — this indicates a need
for service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
4
01-06/25N-M180 w/Imp. Safe
4
6/1/00, 10:09 AM
MENU
TV • VCR • CATV
Q1395SA
VCR CH
FF
REC
PLAY
STOP
REW
PAUSE
MUTE
CATV
VOL
+
CH
D
C
CH
B
VOL
—
A
PERSONAL PREFERENCE
9
100
0
6
8
ENTER
5
7
4
FLASHBACK
3
VCR
1
TV
POWER
DISPLAY
2
INPUT
TV
Supplied Accessories
Size AA
Dry Batteries
Infrared Remote Control
Part Number : RRMCG1395CESA
Before Operating Your Television
Location
• For normal operation, your TV should be located in an area of the room where cool adequate
ventilation is provided. Do not place the back of the television set in a place where free airflow
will be restricted.
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks,
toys using magnets or any other magnetic substance, such as iron are kept well away from this
TV set.
Power
Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug.
If you are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit,
contact an electrician. Do not defeat the safety feature of the polarized plug.
NOTE:
• If the set will not be used for a long period, such as during a vacation, unplug the set from the
wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with
the POWER BUTTON in the OFF position.)
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is
located near the TV and both radio and TV broadcasts are being received. Should such noise
appear, turn off either the TV or the radio.
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be
received due to the interference of the TV.
L Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
Pull up
Battery
Cover
• With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert
two batteries (size “AA”). Be sure to match the battery e/d terminals with the e/d marks
inside the compartment.
5
01-06/25N-M180 w/Imp. Safe
5
6/1/00, 10:09 AM
Antenna Connections
Antennas
• The antenna requirements for good color television reception are more important than those
for black & white television reception. For this reason, a good quality outdoor antenna is strongly
recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
1. A 75 ohm system is generally a round cable with Ftype connector that can easily be attached to a terminal
without tools (not supplied). The F-type connector
should be finger tightened only.
F-type connector
75-ohm coaxial
cable (round)
300-ohm
twin-lead cable
(flat)
2. A 300 ohm system is a flat “twin-lead” cable that can
be attached to a 75 ohm terminal through a 300-75
ohm ADAPTOR (not supplied).
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear
of the TV set.
A. Combination VHF/
VHF/UHF ANTENNA
300/75-ohm
UHF Antenna
ADAPTOR
(not supplied)
or
VHF/UHF
ANTENNA
300-ohm
twin-lead
75-ohm
coaxial
cable
REAR OF TV
B. Separate VHF/UHF
Antenna
REAR OF TV
VHF
UHF
ANTENNA ANTENNA
300-ohm
twin-lead
300-ohm
twin-lead
COMBINER
(not supplied)
IN OUT
or
75-ohm coaxial
cable
6
01-06/25N-M180 w/Imp. Safe
6
6/1/00, 10:09 AM
Antenna Connections
CABLE TV (CATV) CONNECTION
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75
ohm coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium
pay channels are scrambled, a cable TV converter/descrambler is generally provided to the
subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing
of the scrambled channels. (Set your TV on channel 3 or 4. Typically one of these channels is
used. If this is unknown, consult your cable TV company.) For more specific instructions on
installing cable TV, consult your cable TV company. One possible method of utilizing the
converter/descrambler provided by your cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied)
“B” position on the RF switch (not supplied)
: You can view all unscrambled channels using
the TV’s channel keys.
: You can view the scrambled channels via the
converter/descrambler using the converter’s
channel keys.
RF switch (not supplied)
Two-set
signal
splitter
(not
supplied)
OUT
Cable TV Line
IN
Cable TV converter/
descrambler
(not supplied)
NOTE:
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner
that might be required.
7
07-16/25N-M180 w/Imp. Safe
7
6/1/00, 10:04 AM
Quick Reference Control Operation
L Location of Controls
(ENGLISH)
Front Panel
VIDEO/AUDIO IN TERMINALS
POWER
Press → On.
Press again → Off.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
SENSOR AREA FOR
REMOTE CONTROL
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• Press both at same time to
access MAIN MENU screen.
Basic Remote Control Functions
Infrared Transmitter Window
POWER
Press → On.
Press again → Off.
DISPLAY
Press → Displays receiving channel for
four seconds.
Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
POWER
TV
VCR
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the four categories
A, B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 30.)
DISPLAY
INPUT
1
2
3
4
5
6
7
8
INPUT
Press once → Switch to external video
mode.
Press again → Switch back to the
original TV mode.
See page 32.
9
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
MUTE
CATV
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
TV-CATV MODE SELECT SWITCH
In TV position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV.
In CATV position, sends power and
channel select commands to a cable
TV converter.
REW
PLAY
FF
PAUSE
STOP
REC
TV
ENTER
Used in some instances where a VCR
or Cable Converter Box requires an
“enter” command after selecting
channels, when using the REMOTE
KEYPAD button. (See page 33)
VCR CH
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages 26 - 29 for channel
presetting.
• Moves the “ ” mark of the MENU
screens.
TV • VCR • CATV
MUTE
Press → Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
VCR CONTROL
See page 33.
NOTE:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
8
07-16/25N-M180 w/Imp. Safe
8
6/1/00, 10:04 AM
Referencia rápida de los controles de operación
L Ubicación de los controles
(ESPAÑOL)
Front Delantero
TERMINALES DE ENTRADA
VIDEO/AUDIO
ALIMENTACION (POWER)
Pulsando → Enciende (On).
Pulsando nuevamente → Apaga (Off).
AUMENTO/DISMINUCION
DEL VOLUMEN (VOL)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
ZONA DEL SENSOR DEL
MANDO A DISTANCIA
Funciones Basicas Del Control Remoto
CANAL SUPERIOR/INFERIOR (CH)
(8) Selecciona el siguiente canal
superior.
(9) Selecciona el siguiente canal
inferior.
• Pulse los dos a la misma vez
para acceder a la pantalla de
MENU PRINCIPAL.
Ventanilla del transmisor de infrarrojos
ALIMENTACION (POWER)
Pulsando → Enciende (On).
Pulsando nuevamente → Apaga (Off).
TECLADO A DISTANCIA
(REMOTE KEYPAD)
Para tener acceso a cualquier canal
empleando las teclas.
VISUALIZACION (DISPLAY)
Pulsando → Aparece el canal de
recepción por cuatro segundos.
Pulsando nuevamente → Elimina la
visualización.
• En el modo de “Closed Caption” se
muestra el canal de recepción por un
corto tiempo.
POWER
TV
VCR
RETORNO AL CANAL
ANTERIOR (FLASHBACK)
Para volver al canal anterior.
PREFERENCIAS PERSONALES
Con los botones Personal Preference
puede programar sus programas
favoritos utilizando las cuatro categorías
A, B, C y D.
Puede acceder a los canales rápidamente
utilizando estos botones.
DISPLAY
INPUT
1
2
3
4
5
6
7
8
ENTRADA (INPUT)
Pulsando → Cambia al modo del vídeo
externo.
Pulsando otra vez → Vuelve al modo TV
original.
9
FLASHBACK
ENTER
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
AUMENTO/DISMINUCION DEL
VOLUMEN (VOLUME UP/DOWN)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
• En modo de MENU cambia o
selecciona el ajuste del televisor.
MENU
MUTE
REW
PLAY
FF
PREPARACION (MENU)
Pulsando → Accede al MENU
PRINCIPAL.
Pulsando nuevamente → Sale del MENU
PRINCIPAL.
CONMUTADOR SELECTOR DE
TELEVISOR/TV POR CABLE (TV-CATV)
En la posición TV, el mando envia los
comandos de alimentación y selección de
canales (botones de canal superior/inferior
y de acceso aleatorio) a un televisor.
En la posición CATV, envia los comandos
de alimentación y selección de canales a
un convertidor de TV por cable.
PAUSE
STOP
REC
TV
CATV
VCR CH
Q1395SA
TV • VCR • CATV
INTRODUCIR (ENTER)
Se utiliza en algunos casos en los cuales
un VCR o una Caja de Inversor de Cable
requiere una orden “enter” después de
seleccionar los canales, al usar el teclado
a distancia.
CANAL SUPERIOR/INFERIOR
(CHANNEL UP/DOWN)
(8) Selecciona el siguiente canal
superior.
(9) Selecciona el siguiente canal inferior.
• En el modo de MENU, mueve la marca
”.
“
SILENCIAMIENTO (MUTE)
Pulsando → Silencia el sonido.
Pulsando nuevamente → Restaura el
sonido.
• CLOSED CAPTION aparece
automáticamente cuando el sonido
es silenciado.
Siempre y cuando la transmisión tenga
esta señal.
CONTROLES DEL VIDEO
NOTA:
• Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para usar el visor
del control remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.
• El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no representa ningún
peligro.
• El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.
• El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.
• El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación circundante.
• La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.
9
07-16/25N-M180 w/Imp. Safe
9
6/1/00, 10:04 AM
Quick Reference
Référence
rapideControl
sur les commandes
Operation
L Emplacement des touches
(FRANÇAIS)
Panneau Avant
PRISES D’ENTRÉE
VIDÉO/AUDIO
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre
hors tension.
AUGMENTATION/REDUCTION
DU VOLUME SONORE (VOL)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
ZONE DE DETECTION
DU CAPTEUR
TOUCHES DES CANAUX
CROISSANT/DÉCROISSANT (CH)
(8) Sélectionne le canal supérieur
suivant.
(9) Sélectionne le canal inférieur
précedent.
• Appuyez sur les deux poussoirs
simultanément pour accéder á
l’écran du MENU PRINCIPAL.
Fonctions de base de la télécommande
Fenêtre d’émission du signal infrarouge
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre hors
tension.
AFFICHAGE (DISPLAY)
Appuyer pour afficher le canal reçu
pendant quatre secondes.
Appuyer de nouveau pour faire disparaître
le canal.
• Pour afficher temporairement le canal
reçu en mode sous-titrage.
POWER
TV
VCR
DISPLAY
INPUT
PAVÉ NUMÉRIQUE DE COMMANDE A
DISTANCE (REMOTE KEYPAD)
Sélectionne directement le canal voulu sur
le pavé numérique.
1
2
3
4
5
6
RETOUR (FLASHBACK)
Rappelle demier le canal regardé.
7
8
9
FLASHBACK
ENTER
0
PRÉFÉRENCES PERSONNELLES
Grâce aux touches de préférence
personnelle, vous pouvez programmer
vos programmes préférés à l’aide des
quatre catégories: A, B, C et D. Ces
touches vous permettent d’accéder
rapidement à ces canaux.
ENTRÉE (INPUT)
Appuyer pour sélectionner le mode vidéo
externe.
Appuyer de nouveau pour revenir au
mode TV initial.
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
AUGMENTATION/RÉDUCTION DU
VOLUME SONORE (VOLUME UP/
DOWN)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
• Pour changer ou sélectionner les
réglages du téléviseur en mode menu.
MUTE
CATV
REW
PAUSE
PLAY
STOP
FF
REC
RÉGLAGE (MENU)
Appuyer → Accès au MENU PRINCIPAL.
Appuyer de nouveau → Sortie du MENU
PRINCIPAL.
SÉLECTEUR DE MODE TÉLÉVISION/
CÂBLOVISION (TV-CATV)
En position télévision (TV), permet de
mettre le téléviseur sous/hors tension et
de sélectionner ses canaux (touches de
canaux en ordre croissant/décroissant et
d’accès direct).
En position câblovision (CATV), permet de
mettre un convertisseur de téléviseur par
câble sous/hors tension et de sélectionner
ses canaux.
TV • VCR • CATV
VCR CH
TV
ENTRER (ENTER)
Parfois utilisée lorsqu’un magnétoscope
ou un convertisseur nécessite
l’introduction d’une commande “enter”
après la sélection de canaux à l’aide du
pavé numérique de commande à distance.
TOUCHES DES CANAUX CROISSANT/
DÉCROISSANT (CHANNEL UP/DOWN)
(8) Sélectionne le canal supérieur
suivant.
(9) Sélectionne le canal inférieur
précedént.
” sur l’écran du
• Déplace le curseur “
MENU.
SOURDINE (MUTE)
Appuyer → Mise en sourdine du son.
Appuyer de nouveau → Rétablissement
du son.
• CLOSED CAPTION apparaît lorsque le
son est mis en sourdine.
COMMANDE DU MAGNÉTOSCOPE
REMARQUE :
• Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans l’obscurité lorsque la télécommande a
été placée sous une ampoule fluorescente ou toute autre source lumineuse.
Le matériau phosphorescent n’est absolument pas toxique ou radioactif. Il peut donc être utilisé en toute sécurité.
Le degré d’illumination variera en fonction de l’intensité de la source d’éclairage.
Le degré d’illumination diminuera avec le temps, en fonction de la température.
Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.
Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des
touches phosphorescentes.
•
•
•
•
•
10
07-16/25N-M180 w/Imp. Safe
10
6/1/00, 10:04 AM
EZ SETUP during First Power On
L When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before you press
the power button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See page 6)
(3) Plug in the AC POWER cord to the wall outlet.
POWER
POWER
TV
VCR
DISPLAY
INPUT
1
2
3
4
5
6
7
8
9
VOLUME
(+)/(–)
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
1
TV
CHANNEL
UP (8)/
DOWN (9)
MENU
Press the POWER button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
(Remote Control)
(On the Set)
(SELECT LANGUAGE mode)
2
Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
3
Press VOL (+) or (–) to access EZ SETUP mode.
(EZ SETUP mode)
4
Press VOL (+).
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press VOL (–) and it will be canceled.
If you want to SETUP again, please refer to page 26
on SETUP.
To cancel EZ SETUP
Press VOL (–).
5
Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
NOTE:
• If EZ SETUP does not memorize all the channels in your region, please refer to page 28 for
more information on manually memorizing the channels using CHANNEL SETTING.
• It may be difficult to PRESET all channels in an area when the broadcasting signals are weak,
or multiple stations are received on the same channel. Please refer to pages 28 - 29 for more
information on manually memorizing additional channels using CHANNEL MEMORY.
11
07-16/25N-M180 w/Imp. Safe
11
6/1/00, 10:04 AM
Demo Mode
• To quickly learn more about the TV set, press and hold for more than
three seconds both CH UP (8) and DOWN (9) on the TV set. The TV
(On the set)
9
set will go into DEMO mode and briefly explain the various features.
• To cancel DEMO mode, again press both CH UP (8) and DOWN (9)
on the TV set.
CH
8
MENU
Accessing the MAIN MENU screen without Remote Control
• If you misplaced your Remote Control you can still access most
settings via the MAIN MENU screen when you press both CH UP (8)
and DOWN (9) on the TV set.
• Some features of your TV Set will not be accessible without the
(On the set)
9
Remote Control. If you lost your Remote Control, contact a Sharp
Authorized Servicer by calling 1-800-BE-SHARP for a replacement.
CH
8
MENU
Language
L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
L Setting the ON SCREEN DISPLAY Language.
1
Press MENU to access MAIN MENU screen.
(MAIN MENU screen)
2
Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET
UP”.
3
Press VOL (+) or (–) to access SET UP mode, then press CH UP (8)
or DOWN (9) to move the “ ” mark to “LANGUAGE”.
→
B L UE SCRE EN
P E R S ON A L P R E F .
UN I V E RS A L P L US
L A N GU A GE
C H S E T T I NG
(SET UP mode)
4
Press VOL (+) or (–) to access LANGUAGE change mode.
(LANGUAGE change mode)
5
Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
6
Press MENU to exit.
12
07-16/25N-M180 w/Imp. Safe
12
6/1/00, 10:04 AM
Sleep Timer
L You can set the number of minutes for your TV to automatically turn off.
1
2
Press MENU to access MAIN MENU screen.
Press VOL (+) or (–) to access TIMER SET mode.
→
(MAIN MENU screen)
3
Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120 minutes.
4
Press MENU to exit.
→
(TIMER SET mode)
NOTE:
• To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – REMAIN”
during step 3.
• While Sleep Timer is active, the time remaining will be briefly displayed on-screen at regular
intervals or when the remote’s Display key is pressed.
Video Adjust
Description of Adjustment Items
Selected Item
VOL UP (+) button
VOL DOWN (–) button
PICTURE
To increase contrast
To decrease contrast
TINT
To make skin tones greenish
To make skin tones purplish
COLOR
To increase color intensity
To decrease color intensity
BRIGHT
To increase brightness
To decrease brightness
SHARP
To increase sharpness
To decrease sharpness
VOLUME
(+)/(–)
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
TV
CHANNEL
UP (8)/
DOWN (9)
MENU
FAVORITE COLOR To choose a RED, BLUE or STANDARD COLOR TONE.
RESET
1
2
To return all adjustments to factory preset levels.
Press MENU to access MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “ ” mark to “VIDEO
ADJUST”.
→
(MAIN MENU screen)
3
Press VOL (+) or (–) to access PICTURE adjust mode.
(PICTURE adjust mode)
4
Press CH UP (8) or DOWN (9) to select the desired mode.
(Refer to the diagram below.)
13
07-16/25N-M180 w/Imp. Safe
13
6/1/00, 10:04 AM
Video Adjust (Continued)
5
Press VOL (+) or (–) to adjust the setting.
VOL UP(+)
increase contrast
VOL DOWN (–)
decrease contrast
6
Repeat steps 4 - 5 to adjust other settings.
7
Press MENU to exit.
Closed Caption
L HOW TO SET CLOSED CAPTION
• Your TV is equipped with an internal Closed Caption decoder. “Closed
Caption” is a system which allows you to view conversations,
narration, and sound effects in TV programs and home videos as
subscript on your TV screen as shown on the right.
• Not all the programs and videos will offer closed caption. Please
” symbol to ensure that captions will be shown.
look for the “
• Closed Caption broadcast can be viewed in two modes: CAPTION
and TEXT. For each mode, two channels are available, CH1 and CH2:
The [CAPTION] mode subscripts dialogues and commentaries
of TV dramas and news programs while allowing clear view of
the picture.
The [TEXT] mode displays over the picture other various
information (such as TV program schedule, weather forecast, etc.)
that is independent of the TV programs.
1
2
VOLUME
(+)/(–)
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
TV
CHANNEL
UP (8)/
DOWN (9)
MENU
Press MENU to access MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “ ” mark to “CLOSED
CAPTION”.
→
(MAIN MENU screen)
3
Press VOL (+) or (–) to access CLOSED CAPTION setting mode.
(CLOSED CAPTION setting mode)
4
Press CH UP (8) or DOWN (9) to move the “
“MODE” or “DATA”.
” mark to either
14
07-16/25N-M180 w/Imp. Safe
14
6/1/00, 10:04 AM
Closed Caption (Continued)
5
Press VOL (+) or (–) to change the CLOSED CAPTION setting.
DATA :
MODE :
6
Press MENU to exit.
NOTE:
• If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION]
mode automatically. Pressing MUTE again will return the set to its previous condition.
• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your set.
• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily.
• When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen
may become dark and blank. Should this occur, set the Closed Caption mode to “OFF”.
Parent Control (V-CHIP Operation)
L V-CHIP
• This function allows you to restrict TV programs and also allows you to control TV usage based on
FCC data. This function is to prevent your children from watching violence or sexual scenes that may
be harmful.
• Restriction of TV programs includes two characters that contain information about the program’s MPAA
rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted
by age and contents.
• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for
complete control.
[1] MPAA RATING
RATING
age
base
G
GENERAL AUDIENCES. All ages admitted.
PG
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for
children.
PG-13
PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for
children under 13.
R
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17
NO ONE 17 AND UNDER ADMITTED.
X
X Rating is an older rating that is unified with NC-17 but may be encoded on
older movie’s data.Note:
• MPAA RATING (Example)
Example 1.
“PG-13” in the age-based RATING is blocked.
This will automatically block the high ratings “R”,
“NC-17” and “X” also.
15
07-16/25N-M180 w/Imp. Safe
15
6/1/00, 10:04 AM
Parent Control (V-CHIP Operation Continued)
Example 2.
“R” in the age-based RATING is blocked. This
will automatically block the high rating “NC17” and “X” also.
NOTE:
• MPAA RATING is only age-based ratings.
[2] TV PARENTAL GUIDELINES
y
RATING
Age
—
—
—
—
—
—
—
—
—
—
—
—
—
—
TV-PG (Parental
Guidance Suggested)
—
TV-14 (Parents
Strongly Cautioned)
—
TV-MA (Mature
Audience Only)
—
—
TV-Y7 (Direct to
Older Children)
Age TV-G (General
Base Audience)
D
x
TV-Y (All children)
E
Content Base
D
L
S
V
FV
(Sexually
(Adult
(Sexual (Violence) (Fantasy
Suggestive Language) Situation)
Violence)
Dialog)
: Content Rating can be set.
— : Content Rating can not be set (not normally broadcast by TV Station).
• TV-PARENTAL GUIDELINES (Example)
Example 1.1 : Age Based setting
Go through all select ratings and select unblocked (“– – – –”)
for “AGE”. This will automatically unblock everything.
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
AGE
D
–
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
FV
–
–
–
–
–
: VIEW
: BLOCK
MENU : RETURN
Example 1.2 : Age Based setting
For “TV-G” select “BLOCK” for “AGE”. This will automatically
block the higher age ratings “TV-PG”, “TV-14”, “TV-MA” and
“TV-G”.
Furthermore, the content ratings “D”, “L”, “S”, “V”, “FV” are
automatically blocked as well for “TV-PG”, “TV-14” and “TVMA” in addition to “TV-G”.
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
AGE
16
L
–
–
–
S
–
–
–
V
–
–
–
FV
–
–
–
–
–
MENU : RETURN
16
07-16/25N-M180 w/Imp. Safe
D
–
–
–
–
6/1/00, 10:04 AM
: VIEW
: BLOCK
Parent Control (V-CHIP Operation Continued)
Example 2.1 : Content- Based setting
For “TV-PG”, “TV-14” and “TV-MA” select unblocked (“– – – –”)
for each content rating but leave "AGE" blocked for “TV-PG”
and “TV-14” only.
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
AGE
D
–
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
FV
–
–
–
–
–
: VIEW
: BLOCK
MENU : RETURN
Example 2.2 : Content-Based setting
For “TV-PG”, select "BLOCK" for only “V” (Violence).
This will automatically block the higher ratings “TV-14-V” and
“TV-MA-V” (“TV-14” and “TV-MA” for Violence content only).
Please note that with these settings, blocking does NOT
occur if a program is rated only “TV-MA”; it must be rated
“TV-MA-V ” to be blocked.
Example 3 : Reset an Age-Based setting
For “TV-14”, select “BLOCK” for "AGE".
This will again automatically block the content ratings “D”,
“L”, “S”, “V”, “FV” for “TV-MA” in addition to “TV-14”.
Please note that the lower age rating “TV-PG” did not change
from its previous settings.
AGE D L S V FV
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
: VIEW
: BLOCK
MENU : RETURN
AGE
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
D
–
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
FV
–
–
–
–
–
: VIEW
: BLOCK
MENU : RETURN
NOTE:
• Content ratings can be modified but only in the combinations indicated by “ ” in the table on
page 16.
• Changing a lower age-rating’s content setting to "BLOCK" automatically changes the same higher
age-rating’s content setting to “BLOCK” regardless of their previous settings.
• Changing a lower rating's “AGE” setting to “BLOCK” automatically changes all higher ratings to
“BLOCK” regardless of their previous settings.
• Any rating's "AGE" set to unblocked (“– – – –”) must have its content settings individually set.
[3] ADDITIONAL MODE
Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES,” new ratings systems
data can be downloaded when they become available. (See page 21.)
L HOW TO SET V-CHIP
1
2
3
4
5
6
7
8
FLASHBACK
9
ENTER
0
100
REMOTE
KEYPAD
VOLUME
(+)/(–)
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MENU
[1] MPAA RATING
1
MUTE
CHANNEL
UP (8)/
DOWN (9)
Press MENU to access MAIN MENU screen.
(MAIN MENU screen)
17
17-26/25N-M180 w/Imp. Safe
17
6/1/00, 10:02 AM
Parent Control (V-CHIP Operation Continued)
2
Press CH UP (8 ) or DOWN (9 ) to move the “
“PARENT CONTROL”.
3
Press VOL (+) or (–) to access PARENT CONTROL mode, then
press VOL (+) or (–) to access V-CHIP select mode.
” mark to
(PARENT CONTROL mode)
4
Press VOL (+) or (–) to access “MPAA RATING”.
MP A A
T V GU I D E L I N E S
DOWN L O A D : O F F
S T A TUS
: OF F
(V-CHIP select mode)
5
Press CH UP (8) or DOWN (9) to move the “ ” mark to "PG",
then press VOL (+) or (–) to select BLOCK. If you set “PG” to
BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically blocked.
→
6
Repeat pressing MENU to return V-CHIP select mode exit.
NOTE:
Example:
• If you set “G” to BLOCK, all RATINGS are automatically blocked.
• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.
18
17-26/25N-M180 w/Imp. Safe
18
6/1/00, 10:02 AM
Parent Control (V-CHIP Operation Continued)
[2] TV GUIDELINES
1
2
3
4
Repeat steps 1 - 3 of [1] MPAA RATING.
Press CH UP (8) or DOWN (9) to move the “
GUIDELINES”.
” mark to “TV
Press VOL (+) or (–) to access TV GUIDELINES mode.
To change CONTENT SETTING, press CH UP (8) or DOWN (9)
to move the “ ” to the desired rating and then press VOL (+)
or (–) to select.
→
5
Press CH UP (8) or DOWN (9) to move the “ ” to the desired
content and then press VOL (+) or (–) to select either “BLOCK”
or unblock (“ - - - - ”).
→
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
AGE
D
–
–
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
FV
–
–
–
–
–
: VIEW
: BLOCK
MENU : RETURN
(TV GUIDELINES mode)
TV-PG
AGE
D
L
S
V
FV
BLOCK
————
————
————
————
BLOCK
MENU : RETURN
(CONTENT SETTING mode)
6
7
Press MENU to return to TV GUIDES mode.
Repeat steps 4 - 5 until all ratings and their contents are set.
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
AGE
D
–
–
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
FV
–
–
–
–
–
: VIEW
: BLOCK
MENU : RETURN
8
When done, press MENU to exit.
19
17-26/25N-M180 w/Imp. Safe
19
6/1/00, 10:02 AM
Parent Control (V-CHIP Operation Continued)
[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK
1
Press CH UP ( 8) or DOWN (9 ) to move the “ ” mark to
“STATUS”, then press VOL (+) or (–) to activate ON the V-CHIP
BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.)
→
2
Press MENU, then “INPUT SECRET No.” will be displayed.
3
Enter the 4-digit SECRET No. using the REMOTE KEYPAD.
1
2
3
4
5
6
7
8
9
ENTER
0
4
100
Press MENU and SECRET No. is registered.
L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
1
“V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch
the program with Program Rating data the same as you configured.
NOTE:
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.
2
Press MENU, then “INPUT SECRET No.” will be displayed.
3
Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then
V-CHIP BLOCK will temporarily be canceled. If the wrong SECRET
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.
Input the SECRET No. again in this case.
1
2
3
4
5
7
8
6
9
ENTER
0
100
NOTE:
• If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.
20
17-26/25N-M180 w/Imp. Safe
20
6/1/00, 10:02 AM
Parent Control (V-CHIP Operation Continued)
L To change the V-CHIP BLOCK setting. (Secret No. is registered.)
1
Repeat steps 1 - 3 of [1] MPAA RATING, then “INPUT SECRET
No.” will be displayed.
2
Enter the 4-digit SECRET No. using the REMOTE KEYPAD
and the V-CHIP select mode will be displayed. Repeat
configuration of the V-CHIP BLOCK.
1
2
3
4
5
7
8
6
9
ENTER
0
100
L If you intend to change or have forgotten your Secret No., clear the original Secret No. and
set up a new one.
1
Repeat steps 1 - 3 of [1] MPAA RATING, or 1 - 2 of [ L To cancel
the V-CHIP BLOCK screen while V-CHIP BLOCK has been
activated ], then “INPUT SECRET No.” will be displayed.
2
Press and hold both VOL (+) and CH DOWN (9) on the TV set
simultaneously until the message “INPUT SECRET No.”
disappears.
-
VOL
(On the set)
CH
+
9
8
VOL(+) / CH DOWN(9)
3
Press MENU two times to exit.
[3]-A. Additional mode (DOWNLOAD)
There will be an additional new rating system. In that case, please set up as follows.
Subsequently the new rating system will set up automatically.
1
2
Repeat steps 1 to 3 of [1] MPAA RATING.
3
Press VOL (+) or (–) to “DOWNLOAD : ON”.
4
Repeat pressing MENU to exit.
Press CH UP (8) or DOWN (9) to move the “
“DOWNLOAD”.
” mark to
21
17-26/25N-M180 w/Imp. Safe
21
6/1/00, 10:02 AM
Parent Control (V-CHIP Operation Continued)
L DOWNLOAD V-CHIP DATA
1
2
3
4
5
6
7
8
FLASHBACK
9
ENTER
0
100
REMOTE
KEYPAD
VOLUME
(+)/(–)
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CHANNEL
UP (8)/
DOWN (9)
MENU
1
If you watch the program with “New Rating System Data”,
DOWNLOAD screen will be displayed.
(DOWNLOAD screen)
2
DOWNLOAD screen will disappear, if DOWNLOAD is finished.
NOTE:
• DOWNLOAD would not be started if you don’t watch the program with “New Rating System
Data”.
[3]-B. Additional mode (Example)
1
2
Repeat steps 1 - 2 of [3] Additional mode.
Press CH UP (8) or DOWN (9) to move the “
English Ratings”, then press VOL (+) or (–).
” mark to “Cdn.
→
(After downloading the rating data)
3
You can select “BLOCK” or “– – – – –” (unblock) from each RATING
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–).
C
C8+
G
PG
1 4+
1 8+
: —————
: B LOCK
: —————
: B LOCK
: —————
: B LOCK
I ND I V I DUAL BLOCK
MENU : RETURN
(ENGLISH INDIVIDUAL BLOCK mode)
4
You can select “BLOCK” or “– – – – –” (unblock) from each RATING
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–)
if you select “Cdn. French Ratings” in step 2.
NOTE:
(FRENCH INDIVIDUAL BLOCK mode)
• In additional mode
Including two types (English mode, French mode), altogether you are able to download four
kinds of mode.
22
17-26/25N-M180 w/Imp. Safe
22
6/1/00, 10:02 AM
Parent Control (VIEW TIMER)
L VIEW TIMER
This function allows you to restrict TV viewing time and also allows you to control TV usage.
This function is to prevent your children from watching too much TV.
VIEWING TIME (an accumulative timer: counts only the time
duration acquired while the TV is on.)
• VIEWING TIME can be set from 30M (30 minutes) to 10H00M
V I EW T I ME R
(10 hours) in 30 minutes intervals.
OFF TIME (Restricts TV watching after the VIEWING TIME reaches
V I EW I NG T I ME
zero.)
– – H – –M
O
F F T I ME
• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)
– – H – –M
in 30 minutes intervals.
S T A TUS : OF F
STATUS (ON/OFF setting of VIEW TIMER)
L How to set VIEW TIMER.
1
2
Press MENU to access MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “ ” mark to “PARENT
CONTROL”.
→
T I ME R
V I D EO A D J U S T
C L O S E D C A P T I ON
P A R E N T CON T RO L
E N E RG Y S A V E
SE T UP
(MAIN MENU screen)
3
4
Press VOL (+) or (–) to access PARENT CONTROL mode.
Press CH UP (8) or DOWN (9) to move the “ ” mark to “VIEW
TIMER”.
PARENT
CON T RO L
V – C H I P B L OC K
V I E W T I ME R
→
(PARENT CONTROL mode)
5
Press VOL (+) or (–) to access “VIEW TIMER”.
V I EW
T I ME R
V I E W I N G T I ME
– – H – –M
T I ME
– – H – –M
S T A TUS
: OF F
OF F
6
Press CH UP (8) or DOWN (9) to select “VIEWING TIME” and
“OFF TIME”. For each selection, press the VOL (+) or (–) to set
the time duration.
→
7
8
Press MENU. “INPUT SECRET No.” will be displayed.
V I EW I NG T I ME
2 H 0 0M
T I ME
– – H – –M
S T A TUS : OF F
OF F
Press CH UP (8) or DOWN (9) to select “STATUS”. Press the
VOL (+) or (–) to turn ON the “VIEWING TIMER”. (If STATUS is
OFF, VIEW TIMER is not operated)
→
V I EW T I ME R
V I EW T I ME R
V I EW I NG T I ME
2 H 0 0M
T I ME
5 H 0 0M
S T A T U S : ON
OF F
I NPUT
–
S E CRE T
–
–
No .
–
23
17-26/25N-M180 w/Imp. Safe
23
6/1/00, 10:02 AM
Parent Control (VIEW TIMER Continued)
9 Enter the 4-digit SECRET No. using the REMOTE KEYPAD.
10 Press MENU, and SECRET No. is registered.
1
2
3
4
5
6
7
8
9
1
S E CRE T
2
3
No .
4
→
ENTER
0
I NPUT
100
Example:
• To restrict anybody from watching the TV for 5 hours, after
watching the TV for 2 hours, your settings would look like this:
• They can choose to watch the 2 hours of TV however they wish.
For example, they could watch 1 hour of TV, turn TV off for 30
minutes, then turn TV on and watch the remaining 1 hour on the
VIEWING TIMER.
V I EW T I ME R
V I EW I NG T I ME
2 H 0 0M
T I ME
5 H 0 0M
S T A T U S : ON
OF F
L To change the VIEW TIMER settings. (SECRET No. is registered)
1
I NPUT
Repeat “How to set VIEW TIMER” steps and select
“PARENT CONTROL VIEW TIMER” during step
3. Press VOL (+) or (–), and “INPUT SECRET No.”
will be displayed.
2
Enter the 4-digit SECRET No. using the REMOTE
KEYPAD, and the VIEW TIMER access screen
will be displayed. Repeat step 5 - 6.
–
1
2
3
4
5
6
7
8
I NPUT
S E CRE T
–
–
No .
–
S ECRE T
No .
* * * *
9
ENTER
0
100
NOTE:
• When you choose the correct SECRET No., the VIEW TIMER
access screen is displayed. If the wrong SECRET No. is chosen,
“SECRET No. IS INCORRECT” is displayed. Input the SECRET
No. again in this case.
S ECRE T N o .
I NC O RREC T
IS
L To cancel the VIEW TIMER (While the TV set is OFF but the
VIEW TIMER is set)
1
T I ME O V E R
Turn on TV; a blue screen message “TIME OVER” will appear. If
you do nothing, the TV will turn off in approximately 30 seconds.
I NPUT
–
2
Enter the 4-digit SECRET No. using the REMOTE
KEYPAD . When you choose the correct
SECRET No., the VIEW TIMER is canceled. If
the wrong SECRET No. is chosen, “SECRET
No. IS INCORRECT” is displayed. Input the
SECRET No. again in this case.
1
2
3
4
5
6
7
8
9
–
T I ME
ENTER
0
S ECRE T
I NPUT
–
No .
–
OV E R
S ECRE T
No .
100
* * * *
L To cancel the VIEW TIMER setting or change the SECRET No.
(When you forget the SECRET No.)
1
I NPUT
Repeat “How to set VIEW TIMER” steps and
select “PARENT CONTROL VIEW TIMER” during
step 3. Press VOL (+) or (–), and “INPUT SECRET
No.” will be displayed.
–
24
17-26/25N-M180 w/Imp. Safe
24
6/1/00, 10:02 AM
S E CRE T
–
–
–
No .
Parent Control (VIEW TIMER Continued)
2
Press and hold both VOL (+) and CH DOWN (9) on the TV set
simultaneously until the VIEW TIMER access screen is displayed.
Now you can cancel the VIEW TIMER settings or can change the
SECRET No. while “INPUT SECRET No.” is displayed.
(On the set)
VOL
-
+
9
CH
8
VOL(+) / CH DOWN(9)
L Notice of Remaining VIEWING TIME
VIEWING TIME
0H 30M REMAIN
• For every 30 minute interval, the “remaining time” will be displayed
for four seconds. For the last five minutes, the “remaining time”
will be displayed every minute.
• “0 REMAIN” will be displayed for 10 seconds just before the
VIEWING TIME is completed.
VIEWING TIME
0H 05M REMAIN
VIEWING TIME
0 REMAIN
Energy Save
L This feature lets you lower the power consumption of your
TV set which in turn saves you money and minimizes the
impact on the environment. When this feature is turned on, it
reduces the brightness of the TV to a level that consumes
approximately 20 percent less energy than when the feature
is turned off.
The reduction in brightness will be less noticeable under low
room lighting conditions.
1
2
Press MENU to access MAIN MENU screen.
Press CH UP (8 ) or DOWN (9) to move the “
“ENERGY SAVE”.
” mark to
→
PERSONAL PREFERENCE
A
B
C
VOLUME
(+)/(–)
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
TV
CHANNEL
UP (8)/
DOWN (9)
MENU
T I ME R
V I D EO A D J U S T
C L O S E D C A P T I ON
P A R E N T CON T RO L
E N E RG Y S A V E
SE T UP
(MAIN MENU screen)
3
Press VOL (+) or (–) to access ENERGY SAVE select mode.
E N E RG Y
SAVE
: OF F
(ENERGY SAVE select mode)
4
Press VOL (+) or (–) to select “ON”.
5
Press MENU to exit.
E N E RG Y
SAVE
: ON
25
17-26/25N-M180 w/Imp. Safe
25
6/1/00, 10:02 AM
Set Up
L EZ SETUP
By operating the channel presetting functions, you can preset
your TV to the desired channels for viewing.
1
2
3
4
5
6
7
8
FLASHBACK
REMOTE
KEYPAD
9
VOLUME
(+)/(–)
ENTER
0
100
PERSONAL PREFERENCE
A
B
C
CHANNEL
UP (8)/
DOWN (9)
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
MENU
1
2
Press MENU to access MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “
UP”.
” mark to “SET
→
T I ME R
V I D EO A D J U S T
C L O S E D C A P T I ON
P A R E N T CON T RO L
E N E RG Y S A V E
SE T UP
(MAIN MENU screen)
3
Press VOL (+) or (–) to access SET UP mode, then press
CH UP (8) or DOWN (9) to move the “ ” mark to “CH SETTING”.
→
B L UE SCRE EN
P E R S ON A L P R E F .
UN I V E RS A L P L US
L A N GU A GE
C H S E T T I NG
(SET UP mode)
4
Press VOL (+) or (–) to access CH SETTING mode.
EZ SETUP
A I R / CAB L E
CH S E ARCH
C H MEMOR Y
(CH SETTING mode)
5
Press VOL (+) or (–) to access EZ SETUP mode.
CON N E C T A N T E N N A
OR C A B L E .
S T ART
EZ
SE TUP ?
Y E S : VO L +
NO : V O L –
(EZ SETUP mode)
6
7
Press VOL (+).
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once
it has started, press VOL (–). Search will be
canceled.
To cancel EZ SETUP
Press VOL (–).
P L E A S E WA I T
AUTO
18
S T OP : VO L –
Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
26
17-26/25N-M180 w/Imp. Safe
26
P R O G R AMM I N G
6/1/00, 10:02 AM
2
Set Up (Continued)
L CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your region, follow the instructions
below to manually memorize the channel.
1
2
Press MENU to access MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”.
→
T I ME R
V I D EO AD J U S T
C L O S E D C A P T I ON
P A R E N T CON T RO L
E N E RG Y S A V E
SE T UP
(MAIN MENU screen)
3
4
Press VOL (+) or (–) to access SET UP mode.
Press CH UP (8) or DOWN (9) to move the “
SETTING”.
” mark to “CH
→
B L UE SCRE EN
P E R S ON A L P R E F .
UN I V E RS A L P L US
L A N GU A GE
C H S E T T I NG
(SET UP mode)
5
Press VOL (+) or (–) to access CH SETTING mode.
EZ SETUP
A I R / CAB L E
CH S E ARCH
C H MEMOR Y
(CH SETTING mode)
6
Press CH UP (8) or DOWN (9) to move the “ ” mark to the
“AIR/CABLE”, then press VOL (+) or (–) to access AIR/CABLE
mode.
EZ SETUP
A I R / CAB L E
CH S E ARCH
C H MEMOR Y
→
(CH SETTING mode)
7
Press CH UP (8) or DOWN (9) to move the “
desired mode.
AIR
CABLE STD
CABLE HRC
CABLE IRC
” mark to the
A I R / CAB L E
AIR
CAB L E
CAB L E
CAB L E
STD
HRC
I RC
(AIR/CABLE mode)
8
Press MENU to exit.
NOTE:
• Receivable channels of your TV set are:
AIR channels:
VHF: 2 through 13.
UHF: 14 through 69.
CABLE channels:
1 (HRC and IRC mode only)
2 through 125 (STD, HRC and IRC)
27
27-32/25N-M180 w/Imp. Safe
27
6/1/00, 10:01 AM
Set Up (Continued)
L
Saving broadcast TV channels into memory.
1.1
Press MENU to access MAIN MENU screen,
then press CH UP (8) or DOWN (9) to
move the “ ” mark to “SET UP”.
Press VOL (+) or (–) to access SET UP
mode, then press CH UP (8) or DOWN (9)
to move the “ ” mark to “CH SETTING”.
Press VOL (+) or (–) to access CH
SETTING screen.
Press CH UP (8) or DOWN (9) to move
the “ ” mark to “CH SEARCH”, then press
VOL (+) or (–) to access CH SEARCH
mode.
1.2
1.3
1.4
→
→
(CH SETTING mode)
→
START
2.1
(START)
Press VOL (+) . The tuner will search
through all available channels in your area
and add them into the TV’s memory.
(STOP)
STOP
2.2
EZ SETUP
A I R / CAB L E
CH S E ARCH
C H MEMOR Y
2.3
Press VOL (–). CH SEARCH will stop at
the current channel and will not add any
higher channels.
Press MENU to exit.
L
Adding weak or additional channels or erasing unwanted channels from TV memory.
1.1
Press MENU to access MAIN MENU
screen, then press CH UP (8) or DOWN (9)
to move the “ ” mark to “SET UP”.
Press VOL (+) or (–) to access SET UP
mode, then press CH UP (8) or DOWN (9)
to move the “ ” mark to “CH SETTING”.
Press VOL (+) or (–) to access CH
SETTING mode, then press CH UP (8)
or DOWN (9) to move the “ ” mark to
“CH MEMORY”.
1.2
1.3
2.1
Press VOL (+) or (–) to access CH
MEMORY.
2.2
Use CH UP (8) or DOWN (9) or REMOTE
KEYPAD to select each desired channel
to add or erase.
2.3
(CH SEARCH screen)
→
EZ SETUP
A I R / CAB L E
CH S E ARCH
C H MEMOR Y
→
(CH SETTING mode)
→
or
1
2
4
5
7
8
3
6
9
ENTER
0
100
Press VOL (+) to add a channel to the
TV’s memory or press VOL (–) to erase
a channel from the TV’s memory.
28
27-32/25N-M180 w/Imp. Safe
28
6/1/00, 10:01 AM
Set Up (Continued)
2.4
Press MENU to exit.
CH MEMOR Y
A
B
C
D
CH
VOL
—
C H MEMOR Y
VOL
+
CH
MENU
AIR
12
AIR
MUTE
12
CATV
TO
ADD
: +
(CH MEMORY
unmemorized channel)
VOLUME
(+)/(–)
PERSONAL PREFERENCE
VOL (+)
To add channel 12 to
the TV memory
VOL (–)
To erase channel 12
from the TV memory
TO
ERASE : –
TV
CHANNEL
UP (8)/
DOWN (9)
MENU
(CH MEMORY
memorized channel)
NOTE:
• If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the
previously memorized channels will be lost.
L BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not received.
1
2
Press MENU to access MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “
UP”.
” mark to “SET
→
T I ME R
V I D EO AD J U S T
C L O S E D C A P T I ON
P A R E N T CON T RO L
E N E RG Y S A V E
SE T UP
(MAIN MENU screen)
3
Press VOL (+) or (–) to access SET UP mode.
B L UE SCRE EN
P E R S ON A L P R E F .
UN I V E RS A L P L US
L A N GU A GE
C H S E T T I NG
(SET UP mode)
4
Press VOL (+) or (–) to access BLUE SCREEN select mode.
B LUE
S CR E E N
: OF F
(BLUE SCREEN select mode)
5
Press VOL (+) or (–) to select “ON”.
6
Press MENU to exit.
B LUE
S CR E E N
: ON
NOTE:
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN
function despite the presence of a broadcast signal. To continue watching TV under these
conditions, switch the BLUE SCREEN “OFF”.
• While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if
the BLUE SCREEN is turned on.
29
27-32/25N-M180 w/Imp. Safe
29
6/1/00, 10:01 AM
Set Up (Continued)
L PERSONAL PREFERENCE
By setting the PERSONAL PREFERENCE channels in advance,
you can select your favorite channels easily.
1
2
3
4
5
6
7
8
FLASHBACK
PERSONAL
PREFERENCE
9
ENTER
0
100
REMOTE
KEYPAD
VOLUME
(+)/(–)
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CHANNEL
UP (8)/
DOWN (9)
MENU
1
2
Press MENU to access MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “
UP”.
” mark to “SET
→
T I ME R
V I D EO AD J U S T
C L O S E D C A P T I ON
P A R E N T CON T RO L
E N E RG Y S A V E
SE T UP
(MAIN MENU screen)
3
Press VOL (+) or (–) to access SET UP mode, then press
CH UP (8) or DOWN (9) to move the “ ” mark to “PERSONAL
PREFERENCE”.
→
B L UE SCRE EN
P E R S ON A L P R E F .
UN I V E RS A L P L US
L A N GU A GE
C H S E T T I NG
(PERSONAL PREFERENCE select mode)
4
5
Press VOL (+) or (–) to select PERSONAL PREFERENCE in
which you can program four favorite channels, in four different
categories. (total of 16 channels)
Press CH UP (8) or DOWN (9) to move the “
desired position.
” mark to the
P E R S ON A L
A
–––
–––
–––
–––
P E R S ON A L
A
–––
–––
–––
–––
6
Press REMOTE KEYPAD on the Remote to input the CHANNEL
Number into the memory.
1
2
3
Example:
4
5
6
125 — Press “100” followed by “2” and then “5”.
7
8
9
ENTER
0
7
Repeat steps 4 - 6 to input the next CHANNEL Number.
8
Press MENU to exit.
100
B
–––
–––
–––
–––
B
–––
–––
–––
–––
P E R S ON A L
A
125
–––
–––
–––
B
–––
–––
–––
–––
PRE F .
C
–––
–––
–––
–––
D
–––
–––
–––
–––
PRE F .
C
–––
–––
–––
–––
D
–––
–––
–––
–––
PRE F .
C
–––
–––
–––
–––
D
–––
–––
–––
–––
L To select the PERSONAL PREFERENCE channel.
If the channels are memorized as shown to the right,
press the Remote’s “A” button to select the Channels below.
125
25
40
4
P E R S ON A L
A
125
25
40
4
30
27-32/25N-M180 w/Imp. Safe
30
6/1/00, 10:01 AM
B
85
123
55
–––
PRE F .
C
38
30
–––
–––
D
–––
–––
–––
–––
Set Up (Continued)
L UNIVERSAL PLUS FUNCTION
VOLUME
(+)/(–)
PERSONAL PREFERENCE
VCR input mode will be selected automatically by pressing
VCR PLAY button on UNIVERSAL REMOTE CONTROL.
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
TV
CHANNEL
UP (8)/
DOWN (9)
MENU
1
2
Press MENU to access MAIN MENU screen.
Press CH UP (8) or DOWN (9) to move the “
mark to “SET UP”.
”
→
T I ME R
V I D EO AD J U S T
C L O S E D C A P T I ON
P A R E N T CON T RO L
E N E RG Y S A V E
SE T UP
(MAIN MENU screen)
3
Press VOL (+) or (–) to access SET UP mode.
B L UE SCRE EN
P E R S ON A L P R E F .
UN I V E RS A L P L US
L A N GU A GE
C H S E T T I NG
(SET UP mode)
4
5
Press CH UP (8) or DOWN (9) to move the “
mark to “UNIVERSAL PLUS”.
”
Press VOL (+) or (–) to access UNIVERSAL PLUS
select mode.
B L UE SCRE EN
P E R S ON A L P R E F .
UN I V E RS A L P L US
L A N GU A GE
C H S E T T I NG
UN I V ERS A L
V CR :
P LUS
CH 3
CH 4
I NPU T
OF F
(UNIVERSAL PLUS select mode)
6
7
Press CH UP (8) or DOWN (9) to select the “CH3,
CH4”, “INPUT” or “OFF”.
Set model to the input in which your VCR is
connected. If done through RF, select either
channel 3 or 4 to match the setting of the VCR.
UN I V ERS A L
V CR :
P LUS
CH 3
CH 4
I NPU T
OF F
Press MENU to exit.
31
27-32/25N-M180 w/Imp. Safe
31
6/1/00, 10:01 AM
Using the Video and Audio Input Jacks
L Connecting video equipment for playback of video material.
• When the television is connected to video equipment as shown below, the material being played
back on the video equipment can be seen on the television screen.
Connecting video device equipped with video output terminal.
CONNECTIONS
VIDEO EQUIPMENT
(Front connection
terminals of TV)
Camcorder
To VIDEO OUTPUT
To AUDIO OUTPUT
TV Game
VCR
L To watch video material playback.
• Press the Remote’s INPUT to select VIDEO INPUT mode to which the video equipment you
want to playback is connected.
• The external VIDEO INPUT mode will change as follows each time the INPUT is pressed.
AIR
or
CABLE
-
INPUT
(Front)
• INPUT mode can be selected by pressing either the CH UP (8) on the TV remote control when
the TV is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when
it is set to the lowest channel.
NOTE:
• When connecting video or audio equipment to the television, be sure that the power is turned
off in order to prevent damage to either the television or the equipment being connected.
• It is the intent of SHARP that this product be used in full compliance with the copyright law of
the United States and that prior permission be obtained from copyright owners whenever
necessary.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
32
27-32/25N-M180 w/Imp. Safe
32
6/1/00, 10:01 AM
Operation of Remote Control
L “Identifying” Remote VCR and Cable TV
Converters
Your Remote Control has been set at the
factory to operate your TV and many remote
control VCRs and Cable Converters. However,
in some cases an easy one-time set-up step
may be necessary before the Remote will
operate accessory VCRs and Cable
Converters.
• In this set-up step, the Remote locates and
memorizes the remote control transmitter code
for the VCR or Cable Converter.
• Once “identified”, the Remote sends the proper
remote signals to operate your accessory.
• This identify step will not have to be repeated
until power to the Remote is interrupted due
to a battery failure.
L Universal Remote Control
With the purchase of your television set you
also have received the latest innovation in
remote control technology. With its easy-touse push button keyboard, your Remote can
control your television set and most infrared
remote controlled VCRs and cable TV
converters as well.
NOTE:
• Depending on the model, year produced,
brand and type of VCR, some models may
not be compatible with the remote control.
• Some brands of VCR or Cable TV converter
Box may not enable channel selection until
the ENTER is pressed.
Example:
When you select channel 24,
(1) Press REMOTE KEYPAD “2”.
(2) Press REMOTE KEYPAD “4”.
(3) Press ENTER.
For detailed information on the use of the VCR
or Cable TV converter Box refer to their
operating manuals.
L Using Your Remote Control With A VCR
Once you make certain the Remote Control
has “identified” your remote controlled VCR,
the Remote Control is ready to operate your
unit. The various VCR function buttons on the
Remote Control will not operate your VCR
if those features are not already found on
your unit.
• All VCR buttons will operate whether the
Remote Control is in TV or CATV modes.
• For detailed information on the use of the VCR,
refer to the operation manual of the VCR.
L Using Your Remote With Your TV
After installing the batteries, set the TV-CATV
on the remote to the TV position. (If you can
change the channel of the TV by pressing
CH UP (8) or DOWN (9) on the Remote
Control, it is in the TV position.)
VCR POWER
Press to turn the VCR on
and off.
REMOTE KEYPAD
Use to enter two-digit code
numbers when identifying
your VCR.
POWER
TV
VCR
PLAY
Press to playback a tape.
REWIND
Press to rewind a tape.
For some VCRs you may
need to press STOP first,
then REWIND.
In Playback mode, hold
button down to view picture
moving rapidly in reverse.
DISPLAY
INPUT
1
2
3
4
5
6
7
8
ENTER
FF
Press to rapidly advance the
tape. For some VCRs, you
may need to press STOP
first, then FF. In Playback
mode, hold button down to
view the picture moving
rapidly in forward direction.
9
ENTER
FLASHBACK
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
CATV
PAUSE
Press to temporary stop
the tape during playback
or recording. Press again
to release Pause.
REW
PLAY
FF
PAUSE
STOP
REC
STOP
Press to stop the tape.
TV
VCR CH
Q1395SA
VCR CHANNEL
UP ( )/ DOWN ( )
Press to scan up or down
through channels on the
VCR.
RECORD
Press to begin recording.
TV • VCR • CATV
33
33-40/25N-M180 w/Imp. Safe
33
6/6/00, 9:44 AM
Operation of Remote Control (Continued)
VCR
POWER
POWER
TV
VCR
DISPLAY
INPUT
DISPLAY
REMOTE
KEYPAD
1
2
3
4
5
6
7
8
9
FLASHBACK
ENTER
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
MUTE
TV
CATV
CHANNEL
UP (8)/
DOWN (9)
TV-CATV
REW
PLAY
FF
PAUSE
STOP
REC
L HOW TO IDENTIFY A VCR
The remote control may already be set to
operate your VCR. Try this initial check to see
if going on to the following “identify” section is
necessary.
(1) Point remote towards VCR and press VCR
POWER.
(2) Does the remote turn the VCR ON and OFF?
• If yes, the remote is ready to operate the VCR
and no further steps are needed.
• If no, continue to the “identify” section.
L To Identify Your VCR – Direct Entry Method.
Use the following steps and list to quickly
find the remote control code for your
accessory VCR.
• First look up your VCR’s remote control code
number before going through the direct code
entry steps control.
• If this procedure does not identify your
accessory VCR, use the Search method of
identification (described in the next section).
(1) Slide TV-CATV switch to TV.
(2) Press and hold down DISPLAY and
CH DOWN (9) on your remote control.
Then release both buttons.
(3) Within ten seconds after releasing DISPLAY
and CH DOWN (9), enter your VCR’s twodigit remote control code number using
REMOTE KEYPAD (refer to list).
• The remote control is now ready to send
commands to your VCR.
VCR CH
Some brands have more than one remote
code listed, due to changes in the remote
codes from early to later model years, or due
to format differences (VHS/BETA). In such
cases, you may have to try more than one code
to find the code your VCR accepts.
NOTE:
Depending on the model, year produced,
brand, and type of VCR, some models may
not be compatible with the remote control.
L
(1)
(2)
(3)
To Identify Your VCR – Search Method.
Slide TV-CATV switch on the remote to TV.
Press POWER on the VCR to ON.
Stand at least six feet away from the front of
the VCR.
Point the remote towards the VCR.
Hold down DISPLAY and CH UP (8) at the
same time. KEEP HOLDING THE BUTTONS
DOWN.
(4) Watch the Channel Number indicator on the
VCR, Channel numbers will scan up when
the VCR has been identified.
Release DISPLAY and CH UP (8) as soon
as the channel numbers start to scan up.
The VCR’s remote control code number has
been identified, and the remote is ready to
operate the VCR.
34
33-40/25N-M180 w/Imp. Safe
34
6/6/00, 9:44 AM
Operation of Remote Control (Continued)
VCR BRAND
POWER
TV
VCR
TV
POWER
DISPLAY
INPUT
DISPLAY
1
2
3
4
5
6
7
8
9
FLASHBACK
REMOTE
KEYPAD
ENTER
0
100
PERSONAL PREFERENCE
A
B
C
D
CH
VOL
—
VOL
+
CH
MENU
CHANNEL
UP (8)/
DOWN (9)
MUTE
CATV
TV
TV-CATV
REW
PLAY
FF
PAUSE
STOP
REC
VCR CH
TIPS ON IDENTIFYING YOUR VCR:
If your VCR model does not have the CHANNEL
UP function on its remote control, it cannot be
identified using the SEARCH method of identifying.
For such models, please try the DIRECT ENTRY
method of identifying.
Be Patient: a minute or two can seem a lot longer
when you’re waiting for something to happen, but
the code should be identified within two minutes.
Remember, it is only a one-time set-up.
Be careful not to let the VCR scan more than five
channels when the indicator starts to move up.
If you continue holding down the DISPLAY and
CH UP (8) after five channel scans, the proper
remote code can be passed up, and the two minute
identify cycle will have to be repeated.
If a channel change does not occur on the VCR
within two minutes, read the identifying instructions
again and repeat the steps. Should a channel
change still not occur the remote will not operate
with the desired VCR.
L HOW TO IDENTIFY A CABLE CONVERTER
L To Identify Your Cable Converter – Direct
Entry Method.
Use the following steps and list to quickly find
the remote control code for your cable TV
converter.
• First look up your converter’s remote code
number before going through the direct code
entry steps below.
• If this procedure does not identify your
converter, use the Search method of
identification (described in the next section).
Akai ________________
Audio Dynamics ______
Broksonic ___________
Canon ______________
Capehart ____________
Craig _______________
Curtis Mathis _________
Daewoo ____________
DBX _______________
Dynatech ___________
Emerson ____________
Fisher ______________
Funai _______________
GE ________________
Goldstar ____________
Hitachi ______________
Instant Replay ________
JC Penney __________
JVC ________________
Kenwood ____________
Lloyds ______________
Magnavox ___________
Magnin _____________
Marantz _____________
Memorex ____________
Minolta _____________
Mitsubishi ___________
Montgomery Ward ____
Multitech ____________
NEC _______________
Panasonic ___________
Pentax _____________
Philco ______________
Philips ______________
Quasar _____________
RCA _______________
Realistic ____________
Samsung ___________
Sanyo ______________
Scott _______________
Sears ______________
Sharp ______________
Shintom ____________
Sony _______________
Sound Design ________
Sylvania ____________
Symphonic __________
Tatung ______________
Teac _______________
Teknika _____________
Thomas _____________
TMK _______________
Toshiba _____________
Video Concepts ______
Yamaha ____________
Zenith ______________
REMOTE CONTROL
CODE NUMBER
25, 26, 37
15, 22, 30
32
04
34
10, 31
04
34
15, 22, 30
29
21, 32, 35
09, 10, 11
28, 29
04
24
06
04
04, 06, 24, 30
15, 41, 42
14, 15
29
04, 05, 08
31
30
04, 10, 24, 29
06
17, 18, 39, 40
02, 43
29
15, 22, 30
04, 44
05, 06
04, 05
04, 05, 08
04
06, 07, 33
01, 02, 10, 24
23, 31
14, 10
20
06, 11, 24
01, 02, 03
36
12, 13, 38
29
04, 05, 08
29
15
15, 29
27, 29
29
21
19, 20
30
15, 29, 30
16
35
33-40/25N-M180 w/Imp. Safe
35
6/6/00, 9:44 AM
Operation of Remote Control (Continued)
(1) Slide TV-CATV switch to CATV.
(2) Press and hold down DISPLAY and
CH DOWN (9) on your remote control.
Then release both buttons.
(3) Within ten seconds after releasing DISPLAY
and CH DOWN (9), enter your converter’s twodigit code number using REMOTE KEYPAD
(refer to list).
• The remote control is now ready to send
commands to your converter.
• Some brands have more than one remote code
listed due to changes in the remote codes from
early to later model years. In such cases, you
may have to try more than one code to find the
code your converter accepts.
NOTE:
Depending on the model, year produced, brand,
and type of CATV converter, some models may
not be compatible with the remote control.
L To Identify Your Cable Converter – Search
Method.
(1) Slide TV-CATV switch on the remote to CATV.
(2) Press the POWER button on the cable
converter to ON.
(3) Stand at least six feet away from the converter.
Point the remote towards the converter.
Hold down the DISPLAY and CH UP (8) at
the same time. KEEP HOLDING THE
BUTTONS DOWN.
(4) Watch the Channel Number indicator on the
converter.
Channel numbers will scan up when the
converter has been identified.
Release the DISPLAY and CH UP (8) as soon
as the channel numbers start to scan up.
The converter’s remote control code number
has been identified, and the remote is ready to
operate the converter.
TIPS ON IDENTIFYING YOUR CABLE
CONVERTER:
Be Patient: a minute or two can seem a lot
longer when you’re waiting for something to
happen, but the code should be identified
within two minutes. Remember, it is only a
one-time set-up.
Be careful not to let the CATV converter scan
more than five channels when the indicator
starts to move up. If you continue holding down
the DISPLAY and CH UP (8) after five channel
scans, the proper remote code can be passed
up, and the two minute identify cycle will have
to be repeated.
If a channel change does not occur on the cable
converter within two minutes, read the
identifying instructions again and repeat the
steps. Should a channel change still not occur,
the remote will not operate with the desired
converter.
CATV CONVERTER
BRAND
Anvision ____________
Cable Star ___________
Eagle ______________
Eastern International __
General Instrument ____
Hamlin _____________
Jerrold ______________
Macom _____________
Magnavox ___________
NSC _______________
Oak ________________
Oak Sigma __________
Panasonic ___________
Philips ______________
Pioneer _____________
Randtek ____________
RCA _______________
Regal ______________
Regency ____________
Scientific Atlantic ______
Sony _______________
Sylvania ____________
Teknika _____________
Texscan ____________
Tocom ______________
Unika ______________
Viewstar ____________
Zenith ______________
REMOTE CONTROL
CODE NUMBER
07, 08
07, 08
08
02
04, 05, 15, 23, 24, 25,
30, 36
12, 13, 34
04, 05, 15, 23, 24, 25,
30, 36
37
07, 08, 19, 25, 28, 29,
32, 33, 40, 41
09
01, 16, 38
18
27, 39
07, 08, 19, 26, 28, 29,
32, 33, 40, 41
18, 20
07, 08
27, 43
12, 13
02
03, 22, 42
44
11
06
11
17, 21
31
07, 08, 19, 26, 28, 29,
32, 33, 40, 41
14
NOTE:
Some satellite receivers can be operated by the
REMOTE CONTROL. If you have a Satellite
Receiver, you can use the above method to search
for available channels.
36
33-40/25N-M180 w/Imp. Safe
36
6/6/00, 9:44 AM
Before Calling for Service
PROBLEM
QUICK SERVICE
CHECK LIST
No Playback of VCR and Disk
Player
No Picture or Sound from
External Video/Audio Products
Remote Control Doesn’t Work
Bars on Screen
Picture Distorted
Picture Rolls Vertically
No Color
Poor Reception on Some
Channels
Weak Picture
Lines or Streaks in Picture
Ghosts in Picture
Picture Blurred
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
Dark and Blank Picture
External Electrical Noise
Interfering with TV’s Operation
Check these items and see if you can correct trouble with a slight adjustment of the controls.
POSSIBLE REMEDY
Try a new channel, if OK, then
possible station trouble.
X
X
X X X X X
X
X X X X X X X X
X
Is TV plugged in? Power at outlet?
X
X
X X X X X
X
X X X X X X X X
X
Is TV’s POWER button on?
X
X
X X X X X
X
X X X X X X X X
X
Is antenna connected to terminal on
the back of the set?
X
X
X X X X X
X
X X X X X X X X
X
If outside antenna is being used,
check for broken wire.
X
X
X X X X X
X
X X X X X X X X
X
Check for local interference or
external electrical noise.
X
X
X X X X X
X
X X X X X X X X
X
Turn off with POWER button and
then turn it on after about a minute.
X
X
X X X X X
X
X X X X X X X X
X
Adjust COLOR control.
X
X
X X X X X
X
X X X X X X X X
X
Adjust PICTURE control.
X
X
X X X X X
X
X X X X X X X X
X
Check external Video/Audio
products: look for loose/broken
connection leads.
(Refer to page 32)
X
X
X X X X X
X
X X X X X X X X
X
Check batteries of Remote Control.
X
X
X X X X X
X
X X X X X X X X
X
Change Closed Caption mode
to “OFF” / Energy Save mode
to “OFF”.
X
X
X X X X X
X
X X X X X X X X
X
Unplug the TV and plug it in again
after two minutes.
X
X
X X X X X
X
X X X X X X X X
X
NOTE:
• When viewing in TEXT mode, if no TEXT broadcast is being received,
the screen may become dark and blank. Should this occur, set the
Closed Caption mode to “OFF”.
(Dark and Blank Picture)
Calling for Service
For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies,
or customer assistance, please call 1-800-BE-SHARP.
37
33-40/25N-M180 w/Imp. Safe
37
6/6/00, 9:44 AM
Antes de llamar al servicio de reparaciones
PROBLEMA
LISTA DE
COMPROBACIONES
DE SERVICIO
RAPIDO
POSIBLE SOLUCIÓN
El vídeo o el reproductor de discos de video
no reproducen imágenes
El equipo de video/audio externo no
produce imágenes ni sonido
El mando a distancia no funciona
Barras en la pantella
Imagen distorsionada
La imagen se desplaza verticalmente
No hay color
Mala recepción de algunos canales
Imagen débil
Franjas en la imagen
Imagen fantasma
Imagen borrosa
Sonido adecuado, imagen mala
Sonido adecuado, sonido malo
No hay imagen ni sonido
Imagen oscura y en blanco
Interferencia de ruido eléctrico externo con
el funcionamento del televisor
Verifique estos items para ver si usted mismo puede solucionar el problema.
Pruebe con otro canal y si todo está
bien, el problema puede ser de la
emisora.
X
X
X X X X X X X X X X X X X X
X
Está conectado el televisor?
Llega electricidad al tomacorrientes?
X
X
X X X X X X X X X X X X X X
X
Está conectado el interruptor del
televisor?
X
X
X X X X X X X X X X X X X X
X
Está conectado la antena al terminal
del panel posterior del televisor?
X
X
X X X X X X X X X X X X X X
X
Si utiliza una antena exterior,
cerciórese de que el cable no esté
dañado.
X
X
X X X X X X X X X X X X X X
X
Compruebe si hay interferencia local.
X
X
X X X X X X X X X X X X X X
X
Desconecte el interruptor POWER y
vuelva a conectarlo después de
transcurrir un minuto.
X
X
X X X X X X X X X X X X X X
X
Ajuste el control de COLOR.
X
X
X X X X X X X X X X X X X X
X
Ajuste el control de MATIZ.
X
X
X X X X X X X X X X X X X X
X
Verifique los productos externos de
Video/Audio, revise si hay gufas de
conexiones sueltas o rotas.
X
X
X X X X X X X X X X X X X X
X
Compruebe el estado de las pilas del
mando a distancia.
X
X
X X X X X X X X X X X X X X
X
Desactive (OFF) el modo CLOSED
CAPTION / Desactive (OFF) el modo
Ahorro de Energía (Energy Save).
X
X
X X X X X X X X X X X X X X
X
Desenchufe el televisor y vuelva a
enchufarlo despúes de dos minutos.
X
X
X X X X X X X X X X X X X X
X
NOTA:
• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la
pantalla puede ponerse en blanco y negro. Si ocurriera ésto, ponga
el modo CLOSED CAPTION en OFF.
(Imagen oscura y en blanco)
38
33-40/25N-M180 w/Imp. Safe
38
6/6/00, 9:44 AM
Limited Warranty
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand
product (the “Product”), when shipped in its original container, will be free from defective workmanship and
materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part
thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the
period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s)
set forth below nor to any Product the exterior of which has been damaged or defaced, which has been
subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or
modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth
below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to
purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET
FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other
than those described herein, or to extend the duration of any warranties beyond the time period described
herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be
the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the
period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of
Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether
based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable or in any way
responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs
performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible
for any incidental or consequential economic or property damage. Some states do not allow the exclusion of
incidental or consequential damages, so that above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH
VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description: 25N-M180, 25 inch Color Television
(Be sure to have this information available when you need
service for your Product.)
Warranty Period for this Product:
One (1) year parts and 90 days labor. The warranty period
continues for an additional one (1) year, for a total of two (2)
years, with respect to the picture tube(s) in the Product for
parts only. Labor and service are not provided free of charge
for this additional period.
Additional Item(s) Excluded from
Warranty Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United
States. To find the location of the nearest Sharp Authorized
Servicer, call Sharp toll free at 1-800-BE-SHARP.
What to Do to Obtain Service:
Contact your Sharp Authorized Servicer to obtain in-home
service for this Product. The Servicer will come to your home
and if it is necessary to remove the Product, the Servicer
will reinstall it. Be sure to have Proof of Purchase available.
TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP
OR VISIT www.sharp-usa.com
39
33-40/25N-M180 w/Imp. Safe
39
6/6/00, 9:44 AM
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
Printed in U.S.A.
TINS-6929MEZZ
40
33-40/25N-M180 w/Imp. Safe
40
6/6/00, 9:44 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement