- No category
advertisement
XIEGU XPA20 6 Band 20 Watt Power Amplifier
User's manual
Includes:
Specifications:
Parameters
Voltage
Current
Name
Rig
Power Connector
Connector terminals (Female)
Adapter cable
Extension cable min
12.5
--
Code
XPA20
White Power Connector
3.5 Stereo Plug 1-to-2 cable
3.5 Stereo extension cable type
13.8
7.2 max
14
-- unit
V
A
Power Output -- 20 -- W
Logic and Parameter Description
1. Operating: a. Press “Up-arrow key” to access BAND inc function, b. Press “Down-arrow key” to access BAND dec function.
2. Settings menu: a. Press △ key till the LED POWER-meter shows “cd”. b. Short press PWR-key. There should be a ”no” shown on the LED POWER-meter.
Short press △ or ▽ key, “no” or “dL” should be shown on the LED POWER-meter circularly which means the setting name (“no” means MODE, ”dL” means TIME
DELAY Value), then short press PWR-key again, the LED of VSWR-Meter shows
“00” (number represents the parameter). c. Short press △ or ▽ to modify the parameters. d. When finish modifications, short press PWR-key to return to normal operation.
1
XIEGU XPA20 6 Band 20 Watt Power Amplifier
3. Parameter Description: a. Menu Parameters
Setting name no dL
Parameter
00
01
01
02
03
04
05
06
07
08
09
Description
SSB MODE
CW MODE
Delay:100ms
Delay:200ms
Delay:300ms
Delay:400ms
Delay:500ms
Delay:600ms
Delay:700ms
Delay:800ms
Delay:900ms
Delay:1000ms 10 b. Main menu Interface
Name
BAND
VSWR
Parameter)
02
04
7.5
15
22
30
Description
Use 2MHz LPF
Use 4MHz LPF
Use 7.5MHz LPF
Use 15MHz LPF
Use 22MHz LPF
Use 30MHz LPF
VSWR values
PO TX Power
4. Bypass mode a. Press POWER-key till the LED of BAND shows “--” which represents the Bypass
Mode kicks in. b. Press POWER-key till the LED of BAND shows some sort of numbers, then the
Bypass Mode is canceled.
Wiring the Rig
1. System running in SSB Mode: peaks of around 45 W into a 50 ohm dummy load across all bands.
2. System running in CW Mode: 20 W
2
XIEGU XPA20 6 Band 20 Watt Power Amplifier
Power supply requirements:
MIN TYPE
Output voltage 12
13.8
Output current 8 --
MAX
--
--
UNIT
V
A
Power connector pin definitions:
● - negative,
■
-positive.
3
XIEGU XPA20 6 Band 20 Watt Power Amplifier
XPA20 FEATURES
Switchable CW/SSB mode circuit
Six selectable low pass filter settings
Selectable time delay
BNC Female input & antenna connectors
XPA20 SPECIFICATIONS
RF power output (max): 20 W for 5 W input
Low pass filter settings:
2.0 MHz
4.0 MHz
7.5 MHz
15.0 MHz
22.0 MHz
30.0 MHz
Time delay (selectable): 100 ms to 1000 ms
Transmission modes: SSB (A3J), CW (A1)
Supply voltage (min/max): 12.5/14.0
Current draw (max): 7.2 A
Dimensions: 97 x 40 x 155 mm
Weight: 550 g
Includes:
1 x XPA20 HF linear amplifier
1 x Power connector housing with 2 x crimp terminals
1 x 3.5 mm stereo Y cable
1 x 3.5 mm stereo extension cable
4
XIEGU XPA20 6 Band 20 Watt Power Amplifier
5
XIEGU XPA20 6 Band 20 Watt Power Amplifier
With X1M Pro
6
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project