- Home
- Home security & automation
- Network Video Recorders (NVR)
- Hikvision
- 7600NI E1/A
- User manual
- 190 Pages
Hikvision 7600NI E1/A Network Video Recorder User Manual
Below you will find brief information for Network Video Recorder 7600NI E1/A. This document is an user manual, therefore it contains information on how to use, manage and maintain this device. The manual explains common functions like adding and connecting IP cameras, live view, advertising configuration, PTZ controls, recording settings, playback, backup, alarm settings, network settings, HDD management, camera settings, NVR management and maintenance and others.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
▼
Scroll to page 2
of
190
User Manual of All-in-One Network Video Recorder All-in-One Network Video Recorder User Manual UD.6L0202D2001A01 User Manual of All-in-One Network Video Recorder Quick Start Guide COPYRIGHT ©2015 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual This Manual is applicable to All-in-One NVR (Network Video Recorder). The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website (http://overseas.hikvision.com/en/). Please use this user manual under the guidance of professionals. Trademarks Acknowledgement and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. 1 User Manual of All-in-One Network Video Recorder Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. 2 User Manual of All-in-One Network Video Recorder Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected. Cautions: Injury or equipment damage may occur if any of the cautions are neglected. Warnings Follow these Cautions Follow to these safeguards to prevent serious precautions prevent injury or death. potential injury or material damage. Warnings ● Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. ● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information. ● Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information. ● Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard. ● Please make sure that the plug is firmly connected to the power socket. If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. 3 User Manual of All-in-One Network Video Recorder Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. The figures in the manual are for reference only. This manual is applicable to the model: DS-7600NI-E1/A. Preventive and Cautionary Tips Before connecting and operating your device, please be advised of the following tips: • • • • • Ensure unit is installed in a well-ventilated, dust-free environment. Unit is designed for indoor use only. Keep all liquids away from the device. Ensure environmental conditions meet factory specifications. Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit. • Use the device in conjunction with an UPS. • Power down the unit before connecting and disconnecting accessories and peripherals. • Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the manufacturer. 4 User Manual of All-in-One Network Video Recorder Product Key Features General Connectable to network cameras, network dome and encoders. Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon, PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt ONVIF or PSIA protocol. Connectable to the smart IP cameras. PAL/NTSC adaptive video inputs. Each channel supports dual-stream. Up to 8 network cameras can be connected. Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc. The quality of the input and output record is configurable. Local Monitoring Simultaneous HDMITM and VGA outputs. HDMITM and VGA outputs at up to 1920×1080 resolution. Importing and previewing advertising videos, audios and pictures. Multiple screen display in live view is supported, and the display sequence of channels is adjustable. Live view screen can be switched in group, and manual switch and automatic cycle live view are also provided, and the interval of automatic cycle can be adjusted. Quick setting menu is provided for live view. Motion detection, video tampering, VCA (Video Content Analysis) alarm, video exception alert and video loss alert functions. Privacy mask. Multiple PTZ protocols supported; PTZ preset, patrol and pattern. Zooming in by clicking the mouse and PTZ tracing by dragging mouse. The NVR can server as a displayer. NVR, HDMI and VGA signal source can be connected and displayed. Advertising One-touch advertising. Video, audio and picture advertising files are supported. Advertising files can be imported via USB storage device and web server. Imported advertising files can be managed. Support configuring preview sequence of advertising files. HDD Management One HDD is installed when delivery. HDD capacity of 500 GB and 1 TB is selectable. 8 network disks (8 NAS disks, or 7 NAS disks+1 IP SAN disk) can be connected. Support S.M.A.R.T. and bad sector detection. HDD quota management; different capacity can be assigned to different channel. Recording and Playback Holiday recording schedule configuration. Continuous and event video recording parameters. 5 User Manual of All-in-One Network Video Recorder Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm, and VCA. 8 recording time periods with separated recording types each day. Pre-record and post-record for alarm, motion detection for recording, and pre-record time for schedule and manual recording. Searching record files by events (alarm input/motion detection/VCA). Tag adding for record files, searching and playing back by tags. Locking and unlocking record files. Searching and playing back record files by camera No., recording type, start time, end time, etc. Smart search for the selected area in the video. Zooming in when playback. Reverse playback of multi-channel. Supports pause, play reverse, speed up, speed down, skip forward, and skip backward when playback, and locating by dragging the mouse. Up to 8-ch synchronous playback. Backup Export video data by USB device. Export video clips when playback. Management and maintenance of backup devices. Alarm and Exception Configurable arming time of alarm input/output. Alarm for video loss, motion detection, VCA, video tampering, HDD full, HDD error, network disconnected, IP confliction, illegal login, abnormal record, etc. Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email and alarm output. Automatic restore when system is abnormal. Other Local Functions Three-level user management; admin user is allowed to create many operating accounts and define their operating permission, which includes the limit to access any channel. Operation, alarm, exceptions and log recording and searching. Manually triggering and clearing alarms. Import and export of device configuration information. Network Functions 1 self-adaptive 10M/100M/1000M network interface is provided. IPv6 is supported. TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS and iSCSI are supported. TCP, UDP and RTP for unicast. Auto/Manual port mapping by UPnPTM. Extranet access by HiDDNS. Support access by EZVIZ Cloud P2P. Remote reverse playback via RTSP. Support accessing by the platform via ONVIF. Remote search, playback, download, locking and unlocking of the record files, and the breakpoint resume is supported for downloading files. Remote parameters setup; remote import/export of device parameters. Remote viewing of the device status, system logs and alarm status. 6 User Manual of All-in-One Network Video Recorder Remote HDD formatting and program upgrading. Remote system restart and shutdown. Alarm and exception information can be sent to the remote host Remotely start/stop recording. Remotely start/stop alarm output. Remote PTZ control. Voice broadcasting. Embedded WEB server. Development Scalability: SDK for Windows and Linux system. Source code of application software for demo. Development support and training for application system. 7 User Manual of All-in-One Network Video Recorder TABLE OF CONTENTS Product Key Features ...................................................................................................................................... 5 Chapter 1 Introduction ........................................................................................................................ 12 1.1 Front View ..................................................................................................................................... 13 1.2 IR Remote Control Operations ...................................................................................................... 14 1.3 USB Mouse Operation .................................................................................................................. 17 1.4 Input Method Description .............................................................................................................. 18 1.5 Rear View ...................................................................................................................................... 19 Chapter 2 Getting Started ................................................................................................................... 20 2.1 Starting Up and Shutting Down the NVR...................................................................................... 21 2.2 Setting Admin Password ................................................................................................................ 22 2.3 Using the Wizard for Basic Configuration..................................................................................... 23 2.4 Login and Logout .......................................................................................................................... 27 2.4.1 User Login ........................................................................................................................ 27 2.4.2 User Logout ...................................................................................................................... 27 2.5 Operating LCD Menu .................................................................................................................... 29 2.5.1 Configuring Displayer Parameters .................................................................................... 29 2.5.2 Switching Input Source ..................................................................................................... 30 2.6 Adding and Connecting the IP Cameras ........................................................................................ 31 2.6.1 Activating the IP Camera .................................................................................................. 31 2.6.1 Adding the Online IP Cameras ......................................................................................... 32 2.6.2 Editing the Connected IP Cameras and Configuring Customized Protocols ..................... 35 Chapter 3 Live View ............................................................................................................................. 38 3.1 Introduction of Live View ............................................................................................................. 39 3.2 Operations in Live View Mode...................................................................................................... 40 3.2.1 Using the Mouse in Live View ......................................................................................... 40 3.2.2 Quick Setting Toolbar in Live View Mode ....................................................................... 41 3.3 Adjusting Live View Settings ........................................................................................................ 44 Chapter 4 Advertising Configuration ................................................................................................. 45 4.1 Importing Advertising Files ........................................................................................................... 46 4.2 Advertising Preview ...................................................................................................................... 47 4.2.1 One-touch Advertising ...................................................................................................... 47 4.2.2 General Advertising .......................................................................................................... 48 4.3 Advanced Configuration ............................................................................................................... 48 4.4 Managing Advertising Files........................................................................................................... 49 Chapter 5 PTZ Controls ...................................................................................................................... 51 5.1 Configuring PTZ Settings.............................................................................................................. 52 5.2 Setting PTZ Presets, Patrols & Patterns......................................................................................... 53 5.2.1 Customizing Presets.......................................................................................................... 53 5.2.2 Calling Presets .................................................................................................................. 53 5.2.3 Customizing Patrols .......................................................................................................... 54 5.2.4 Calling Patrols .................................................................................................................. 55 5.2.5 Customizing Patterns ........................................................................................................ 56 8 User Manual of All-in-One Network Video Recorder 5.2.6 Calling Patterns................................................................................................................. 56 5.2.7 Customizing Linear Scan Limit ........................................................................................ 57 5.2.8 Calling Linear Scan .......................................................................................................... 58 5.2.9 One-touch Park ................................................................................................................. 58 5.3 PTZ Control Panel ......................................................................................................................... 60 Chapter 6 Recording Settings.............................................................................................................. 61 6.1 Configuring Parameters ................................................................................................................. 62 6.2 Configuring Recording Schedule .................................................................................................. 64 6.3 Configuring Motion Detection Recording ..................................................................................... 67 6.4 Configuring Alarm Triggered Recording ....................................................................................... 69 6.5 Configuring VCA Triggered Recording......................................................................................... 71 6.6 Manual Recording ......................................................................................................................... 72 6.7 Configuring Holiday Recording .................................................................................................... 73 6.8 Files Protection .............................................................................................................................. 74 Chapter 7 7.1 Playback .............................................................................................................................. 75 Playing Back Record Files ............................................................................................................ 76 7.1.1 Playing Back by Channel .................................................................................................. 76 7.1.2 Playing Back by Time ....................................................................................................... 78 7.1.3 Playing Back by Event Search .......................................................................................... 79 7.1.4 Playing Back by Tag ......................................................................................................... 81 7.1.5 Smart Playback ................................................................................................................. 83 7.1.6 Playing Back by System Logs .......................................................................................... 85 7.1.7 Playing Back External File ............................................................................................... 87 7.2 Auxiliary Functions of Playback ................................................................................................... 88 7.2.1 Playing Back Frame by Frame .......................................................................................... 88 7.2.2 Digital Zoom..................................................................................................................... 88 7.2.3 Reverse Playback of Multi-channel .................................................................................. 88 Chapter 8 8.1 Backup ................................................................................................................................ 90 Backing up Record Files ............................................................................................................... 91 8.1.1 Quick Export..................................................................................................................... 91 8.1.2 Backing up by Normal Video Search ................................................................................ 92 8.1.3 Backing up by Event Search ............................................................................................. 95 8.1.4 Backing up Video Clips .................................................................................................... 98 8.2 Managing Backup Devices .......................................................................................................... 100 Chapter 9 Alarm Settings .................................................................................................................. 103 9.1 Setting Motion Detection Alarm .................................................................................................. 104 9.2 Setting Sensor Alarms ................................................................................................................. 106 9.3 Detecting Video Loss Alarm ........................................................................................................ 109 9.4 Detecting Video Tampering Alarm .............................................................................................. 110 9.5 Detecting VCA Alarm ................................................................................................................. 112 9.6 Handling Exceptions Alarm......................................................................................................... 114 9.7 Setting Alarm Response Actions ................................................................................................. 115 9.8 Triggering or Clearing Alarm Output Manually .......................................................................... 118 Chapter 10 Network Settings .............................................................................................................. 119 9 User Manual of All-in-One Network Video Recorder 10.1 Configuring General Settings ...................................................................................................... 120 10.2 Configuring Advanced Settings ................................................................................................... 121 10.2.1 Configuring PPPoE Settings ........................................................................................... 121 10.2.2 Configuring Extranet Access .......................................................................................... 121 10.2.3 Configuring NTP Server ................................................................................................. 126 10.2.4 Configuring SNMP ......................................................................................................... 126 10.2.5 Configuring Remote Alarm Host .................................................................................... 127 10.2.6 Configuring Multicast ..................................................................................................... 128 10.2.7 Configuring RTSP .......................................................................................................... 128 10.2.8 Configuring Server and HTTP Ports ............................................................................... 128 10.2.9 Configuring Email .......................................................................................................... 129 10.2.10 Configuring NAT ............................................................................................................ 130 10.3 Checking Network Traffic ........................................................................................................... 133 10.4 Configuring Network Detection .................................................................................................. 135 10.4.1 Testing Network Delay and Packet Loss......................................................................... 135 10.4.2 Exporting Network Packet .............................................................................................. 135 10.4.3 Checking the Network Status .......................................................................................... 136 10.4.4 Checking Network Statistics ........................................................................................... 137 Chapter 11 HDD Management............................................................................................................ 138 11.1 Initializing HDDs ........................................................................................................................ 139 11.2 Managing Network HDD ............................................................................................................ 141 11.3 Configuring Quota Mode............................................................................................................. 143 11.4 Checking HDD Status ................................................................................................................. 145 11.5 HDD Detection ............................................................................................................................ 146 11.6 Configuring HDD Error Alarms .................................................................................................. 148 Chapter 12 Camera Settings ............................................................................................................... 149 12.1 Configuring OSD Settings ........................................................................................................... 150 12.2 Configuring Privacy Mask........................................................................................................... 151 12.3 Configuring Video Parameters .................................................................................................... 152 Chapter 13 NVR Management and Maintenance ............................................................................. 153 13.1 Viewing System Information ....................................................................................................... 154 13.2 Searching & Export Log Files ..................................................................................................... 155 13.3 Importing/Exporting IP Camera Info ........................................................................................... 158 13.4 Importing/Exporting Configuration Files .................................................................................... 159 13.5 Upgrading System ....................................................................................................................... 160 13.5.1 Upgrading by Local Backup Device ............................................................................... 160 13.5.2 Upgrading by FTP .......................................................................................................... 160 13.6 Restoring Default Settings ........................................................................................................... 162 Chapter 14 Others ................................................................................................................................ 163 14.1 Configuring General Settings ...................................................................................................... 164 14.2 Configuring DST Settings ........................................................................................................... 165 14.3 Configuring More Settings for Device Parameters ...................................................................... 166 14.4 Managing User Accounts............................................................................................................. 167 14.4.1 Adding a User ................................................................................................................. 167 10 User Manual of All-in-One Network Video Recorder 14.4.2 Deleting a User ............................................................................................................... 169 14.4.3 Editing a User ................................................................................................................. 170 Chapter 15 Appendix ........................................................................................................................... 172 15.1 Glossary....................................................................................................................................... 173 15.2 Troubleshooting........................................................................................................................... 174 15.3 Summary of Changes .................................................................................................................. 180 15.4 List of Compatible IP Cameras .................................................................................................... 181 List of Hikvision IP Cameras ...................................................................................................... 181 List of Third-party IP Cameras .................................................................................................. 186 11 User Manual of All-in-One Network Video Recorder Chapter 1 Introduction 12 User Manual of All-in-One Network Video Recorder 1.1 Front View Figure 1. 1 Front View Table 1. 1 Description of Buttons No. Icon Description Press it to switch input source. 1 In main menu interface, press it to select and enter a sub-menu. In sub-menu interface, press it to exit the sub-menu. In main menu interface, press it to positioning the cursor to the next item 2 In sub-menu interface, press it to increase the value of a certain item. In main menu interface, press it to positioning the cursor to the upper item 3 In sub-menu interface, press it to decrease the value of a certain item. Press it to enter main menu. 4 In main menu interface, press it exit main menu In sub-menu interface, press it to positioning the cursor to the next item. 5 Turn on/off the LCD displayer. 6 Universal Serial Bus (USB) interface for external USB device. 7 LCD power indicator and IR (Infrared Radiation) receiver. 13 User Manual of All-in-One Network Video Recorder 1.2 IR Remote Control Operations The NVR may also be controlled with the included IR remote control, shown in Figure 1. 2. Batteries (2×AAA) must be installed before operation. Figure 1. 2 Remote Control The keys on the remote control closely resemble the ones on the front panel. Table 1. 2 Description of the Soft Keyboard Icons No. Name Description Power on/off the device. 1 POWER Power on/off the LCD displayer by pressing and holding the button for 3 seconds. Press the button will help you return to the Main menu (after successful login). 2 MENU Button Press and hold the button for 5 seconds will turn off audible key beep. In PTZ Control mode, the MENU button will start wiper (if applicable). 14 User Manual of All-in-One Network Video Recorder No. Name Description In Playback mode, it is used to show/hide the control interface. Press and hold for 3 second to call the LCD menu. Enter the Manual Record setting menu. 3 REC Button In PTZ control settings, press the button and then you can call a PTZ preset by pressing Numeric button. It is also used to turn audio on/off in the Playback mode. Navigate between different fields and items in menus. In the Playback mode, the Up and Down button is used to speed up and slow down recorded video. The Left and Right button will select the next and DIRECTION Button previous record files. In Live View mode, these buttons can be used to cycle through channels. In PTZ control mode, it can control the movement of the PTZ camera. In LCD menu, move the cursor to a certain item. 4 Confirm selection in any of the menu modes. It can also be used to tick checkbox fields. ENTER Button In Playback mode, it can be used to play or pause the video. In single-frame Playback mode, pressing the button will advance the video by a single frame. In LCD menu, serve as the OK button. In Auto-switch mode, it can be used to stop /start auto switch. 5 PTZ Button Call up the LCD signal source menu by pressing and holding the button for 3 seconds. 6 DEV Enables/Disables Remote Control. Switch to the corresponding channel in Live view or PTZ Control mode. 7 Alphanumeric Buttons Input numbers and characters in Edit mode. Switch between different channels in the Playback mode. Back to the previous menu. 8 ESC Button 9 PLAY Button Press for Arming/disarming the device in Live View mode. The button is used to enter the All-day Playback mode. It is also used to auto scan in the PTZ Control menu. Switch between single screen and multi-screen mode. 10 PREV Button In PTZ Control mode, it is used to adjust the focus in conjunction with the A/FOCUS+ button. Troubleshooting Remote Control: Make sure you have installed batteries properly in the remote control. And you have to aim the remote control at the IR receiver in the front panel. If there is no response after you press any button on the remote, follow the procedure below to troubleshoot. Steps: 15 User Manual of All-in-One Network Video Recorder 1. Go to Menu > Configuration > General > More Settings by operating the front control panel or the mouse. 2. Check and remember NVR ID#. The default ID# is 255. This ID# is valid for all the IR remote controls. 3. Press the DEV button on the remote control. 4. Enter the NVR ID# you set in step 2. 5. Press the ENTER button on the remote. If the Status indicator on the front panel turns blue, the remote control is operating properly. If the Status indicator does not turn blue and there is still no response from the remote, please check the following: 1. Batteries are installed correctly and the polarities of the batteries are not reversed. 2. Batteries are fresh and not out of charge. 3. IR receiver is not obstructed. If the remote still can’t function properly, please change a remote and try again, or contact the device provider. 16 User Manual of All-in-One Network Video Recorder 1.3 USB Mouse Operation A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this NVR. To use a USB mouse: 1. Plug USB mouse into one of the USB interfaces on the front panel of the NVR. 2. The mouse should automatically be detected. If in a rare case that the mouse is not detected, the possible reason may be that the two devices are not compatible, please refer to the recommended the device list from your provider. The operation of the mouse: Table 1. 3 Description of the Mouse Control Name Action Description Single-Click Live view: Select channel and show the quick set menu. Menu: Select and enter. Left-Click Double-Click Live view: Switch between single-screen and multi-screen. Click and Drag PTZ control: pan, tilt and zoom. Video tampering, privacy mask and motion detection: Select target area. Digital zoom-in: Drag and select target area. Live view: Drag channel/time bar. Right-Click Single-Click Live view: Show menu. Menu: Exit current menu to upper level menu. Scroll-Wheel Scrolling up Live view: Previous screen. Menu: Previous item. Scrolling down Live view: Next screen. Menu: Next item. 17 User Manual of All-in-One Network Video Recorder 1.4 Input Method Description There are two input method supported, English and numbers. You can click the button English and numbers. and Figure 1. 3 Soft Keyboard - English Description of the buttons on the soft keyboard: Table 1. 4 Description of the Soft Keyboard Icons Icon Description ~ Numerical Buttons Delete Symbols Enter Space Button Exit the Soft Keyboard / Icon Description Lowercase/Uppercase Figure 1. 4 Soft Keyboard - Numbers Table 1. 5 Ddescription of the Soft Keyboard Icons Icon Description Icon ~ Numerical Buttons Delete Period Enter Space Exit the Soft Keyboard 18 Description to switch to User Manual of All-in-One Network Video Recorder 1.5 Rear View Figure 1. 5 Rear View Table 1. 6 Description of Interfaces No. Name Description 1 AOUT-VGA Audio output interface for NVR VGA signal. 2 VGA OUT Video output interface for NVR VGA signal. 3 LAN Network interface. Universal Serial Bus (USB) interface for external USB device. 4 5 AIN-VGA 6 Audio input interface for NVR VGA signal. MIC interface for audio output. 7 VGA IN Video input for VGA input. 8 HDMI IN Video input for HDMI input. 9 12V 12V Power supply. 10 Loudspeaker Loudspeaker for audio output. 19 User Manual of All-in-One Network Video Recorder Chapter 2 Getting Started 20 User Manual of All-in-One Network Video Recorder 2.1 Starting Up and Shutting Down the NVR Purpose: Proper startup and shutdown procedures are crucial to expanding the life of the NVR. Before you start: Check that the voltage of the extra power supply is the same with the NVR’s requirement, and the ground connection is working properly. Starting up the NVR Step: Plug the power supply into the electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device. Shutting down the NVR Steps: 1. Enter the Shutdown menu. Menu > Shutdown Figure 2. 1 Shutdown Menu 2. Click the Shutdown button. 3. Click the Yes button on popup message box. 4. Plug out the power supply on the rear panel when the message box pops up. Figure 2. 2 Shutdown Message Box Rebooting the NVR In the Shutdown menu, you can also reboot the NVR. Steps: 1. Enter the Shutdown menu Menu > Shutdown. 2. Click the Reboot button to reboot the NVR. Or click the Logout button to lock the NVR. 21 User Manual of All-in-One Network Video Recorder 2.2 Setting Admin Password Purpose: For the first-time access, you need to activate the device by setting an admin password. No operation is allowed before activation. Steps: 1. Input the same password in the text field of Create New Password and Confirm New Password. Figure 2. 3 Settings Admin Password STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 2. Click OK to save the password and activate the device. For the old version device, if you update it to the new version, the following dialog box will pop up once the device starts up. You can click YES and follow the wizard to set a strong password. Figure 2. 4 Warning 22 User Manual of All-in-One Network Video Recorder 2.3 Using the Wizard for Basic Configuration Purpose: After admin password is set, the setup wizard pops up automatically. It can walk you through some basic settings of the NVR. Figure 2. 5 Start Wizard Interface Operating the Setup Wizard: 1. The Setup Wizard can walk you through some important settings of the NVR. If you do not want to use the Setup Wizard at that moment, click the Exit button. You can also choose to use the Setup Wizard next time by leaving the “Start wizard when the device starts?” checkbox checked. 2. Click the Next button to enter the date and time settings window, as shown in Figure 2. 6. Figure 2. 6 Date and Time Settings 3. After the time settings, click Next button which takes you to the network setup wizard window. 23 User Manual of All-in-One Network Video Recorder Figure 2. 7 Network Configuration Interface 4. Click Next after you configured the network parameters to enter advanced network settings interface. Figure 2. 8 Advanced Network Settings Interface 5. You can check the checkbox of Enable EZVIZ Cloud P2P and input the Verification Code. Thus you can visit the NVR via in the mobile phone application or the service platform website provided by EZVIZ Cloud P2P. 6. Click Next button to save the settings and enter the HDD management window, shown in Figure 2. 9. Figure 2. 9 HDD Management 24 User Manual of All-in-One Network Video Recorder 7. To initialize the HDD, check the checkbox of the HDD and click the Init button. Initialization removes all the data saved in the HDD. 8. Click Next button to save the settings and enter the importing advertising interface. Figure 2. 10 Importing Advertising Interface. 9. Connect an USB storage device where advertising file stored, click to select the file and click Import. 10. Click Next button to enter the IP Camera Management interface. 11. Click Search to search the online IP Camera and the Security status shows whether it is active or inactive. Before adding the camera, make sure the IP camera to be added is in active status. If the camera is in inactive status, you can click the inactive icon of the camera to set the password to activate it. You can also select multiple cameras from the list and click the One-touch Activate to activate the cameras in batch. Click the Add to add the camera. Figure 2. 11 Search for IP Cameras 12. Click Next button to configure the recording for the added IP cameras. 25 User Manual of All-in-One Network Video Recorder Figure 2. 12 Record Settings 13. Set the record type by check the checkbox of Start Recording and Continuous or Motion Detection. 14. Optionally, you can copy the record type to other cameras by clicking Copy to enter copy interface and select the cameras to copy to. Figure 2. 13 Copy Record Settings 15. Click OK to exit the startup Setup Wizard. 26 User Manual of All-in-One Network Video Recorder 2.4 Login and Logout 2.4.1 User Login Purpose: If NVR has logged out, you must login the device before operating the menu and other functions. Steps: 1. Select the User Name in the dropdown list. Figure 2. 14 Login Interface 2. Input Password. 3. Click OK to log in. The device gets locked for 60 seconds if the admin user performs 7 failed password attempts (5 attempts for the guest/operator). Figure 2. 15 User Account Protection 2.4.2 User Logout Purpose: After logging out, the monitor turns to the live view mode and if you want to do some operation, you need to enter user name and password tog in again. Steps: 1. Enter the Shutdown menu. Menu>Shutdown 27 User Manual of All-in-One Network Video Recorder Figure 2. 16 Logout 2. Click Logout. After you have logged out the system, menu operation on the screen is invalid. It is required to input a user name and password to unlock the system. 28 User Manual of All-in-One Network Video Recorder 2.5 Operating LCD Menu 2.5.1 Configuring Displayer Parameters Purpose: You can press the buttons in front panel to adjust the displayer parameters, including picture mode, off time, on time, OSD language, volume and restore factory default. We take the example of adjusting picture mode to describe the operation. Steps: 1. Press to enter LCD menu. Picture Mode User Picture Mode Off Time Off Contrast 34 On Time Off Brightness 50 OSD Language English Volume 70 User Color 50 Sharpness 50 Restore Factory Default Figure 2. 17 LCD Menu 2. The cursor is positioning in the Picture Mode. Click 3. Press or 4. Press to positioning the cursor to Contrast. to enter the Picture Mode sub-menu. to select the Picture Mode as User, Mild, Dynamic or Standard. Picture Mode User Off Time Off Contrast 34 On Time Off Brightness 50 OSD Language English Volume 70 Picture Mode Color 50 Sharpness 50 Restore Factory Default Figure 2. 18 Adjusting Contrast Parameters 5. Press or to adjust the parameter. 6. Repeat the step 4 ~ 5 to adjust parameters for other items. 7. Press 8. Press to save the settings and back to main menu. to exit LCD menu. 29 User User Manual of All-in-One Network Video Recorder 2.5.2 Switching Input Source Purpose: You can switch the input source to NVR, VGA or HDMI. Steps: 1. Press to enter input source interface. Input Source NVR VGA HDMI Figure 2. 19 Input Source Menu 2. Press 3. Press or to positioning the cursor to NVR, VGA or HDMI. to confirm and exit the menu. 30 User Manual of All-in-One Network Video Recorder 2.6 Adding and Connecting the IP Cameras 2.6.1 Activating the IP Camera Purpose: Before adding the camera, make sure the IP camera to be added is in active status. Before you start: Ensure the network connection is valid and correct. For detailed checking and configuring of the network, please see Chapter 10.3 Checking Network Traffic and Chapter 10.4 Configuring Network Detection. Steps: 1. Enter the IP Camera management interface. Option 1: Right-click in the live view mode and click Add IP Camera. Option 2: Menu > Camera > Camera For the IP camera detected online in the same network segment, the Security status shows whether it is active or inactive. Figure 2. 20 IP Camera Management Interface 2. Click the inactive icon of the camera to enter the following interface to activate it. You can also select multiple cameras from the list and click the One-touch Activate to activate the cameras in batch. 31 User Manual of All-in-One Network Video Recorder Figure 2. 21 Activate the Camera 3. Set the password of the camera to activate it. Use Admin Password: when you check the checkbox, the camera (s) will be configured with the same admin password of the operating NVR. Figure 2. 22 Set New Password Create New Password: If the admin password is not used, you must create the new password for the camera and confirm it. STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 4. Click OK to finish the acitavting of the IP camera. And the security status of camera will be changed to Active. 2.6.1 Adding the Online IP Cameras Purpose: The main function of the NVR is to connect the network cameras and record the video got from it. So before you can get a live view or record of the video, you should add the network cameras to the connection list of the device. Auto Scan to Add Purpose: Once the Auto Scan to Add function is enabled, the NVR will automatically add the IP cameras in the same segment network. And by default, the function is enabled. Steps: 1. Enter IP Camera Management interface. Option 1: Right-click in the live view mode and click Add IP Camera. 32 User Manual of All-in-One Network Video Recorder Figure 2. 23 Right-click Menu 2. Option 2: Menu > Camera > Camera Check the checkbox of Enable Auto Scan to Add. By default, the function is enabled. Manual Adding Steps: 1. Enter IP Camera Management interface. Option 1: Right-click in the live view mode and click Add IP Camera. Option 2: Menu > Camera > Camera 2. The online cameras with same network segment will be displayed in the camera list. Click the button to add the camera. 3. To add other IP cameras 1) Click the Custom Adding button to pop up the Add IP Camera (Custom) interface. Figure 2. 24 Custom Adding IP Camera Interface 2) Input the IP address, Protocol, Management Port, User Name and Password of the IP camera to be added. 3) Click Add to add the camera. The added IP cameras will be listed in the IP Camera Management interface. As shown below: 33 User Manual of All-in-One Network Video Recorder Figure 2. 25 IP Camera Management Interface (By Option 1) Figure 2. 26 IP Camera Management Interface (By Option 2) Table 2. 1 Explanation of Icons Icon Explanation Icon Edit basic parameters of the camera Explanation Add the detected IP camera. The camera is connected; you can The camera is connected. click the icon to get the live view of the camera. The camera is disconnected; you can click the icon to get the exception Advanced settings of the camera. information of camera. Delete the IP camera 34 User Manual of All-in-One Network Video Recorder 2.6.2 Editing the Connected IP Cameras and Configuring Customized Protocols After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the basic setting of the IP cameras. Steps: 1. Click the icon to edit the parameters; you can edit the IP address, protocol and other parameters. Figure 2. 27 Edit the Parameters 2. Click OK to save the settings and exit the editing interface. To edit advanced parameters: Steps: 1. Drag the horizontal scroll bar to the right side and click the icon. Figure 2. 28 Network Configuration of the Camera 2. You can edit the network information and the password of the camera. 3. Click Apply to save the settings and click OK to exit the interface. Configuring the customized protocols Purpose: To connect the network cameras which are not configured with the standard protocols, you can configure the 35 User Manual of All-in-One Network Video Recorder customized protocols for them. Steps: 1. Click the Protocol button in the custom adding IP camera interface to enter the protocol management interface. Figure 2. 29 Protocol Management Interface There are 16 customized protocols provided in the system, you can edit the protocol name; and choose whether to enable the sub-stream. 2. Choose the protocol type of transmission and choose the transfer protocols. Before customizing the protocol for the network camera, you have to contact the manufacturer of the network camera to consult the URL (uniform resource locator) for getting main stream and sub-stream. The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path]. Example: rtsp://192.168.1.55:554/ch1/main/av_stream. Protocol Name: Edit the name for the custom protocol. Enable Substream: If the network camera does not support sub-stream or the sub-stream is not needed leave the checkbox empty. Type: The network camera adopting custom protocol must support getting stream through standard RTSP. Transfer Protocol: Select the transfer protocol for the custom protocol. Port: Set the port No. for the custom protocol. Path: Set the resource path for the custom protocol. E.g., ch1/main/av_stream. The protocol type and the transfer protocols must be supported by the connected network camera. After adding the customized protocols, you can see the protocol name is listed in the dropdown list, please refer to Figure 2. 30. 36 User Manual of All-in-One Network Video Recorder Figure 2. 30 Protocol Setting 3. Choose the protocols you just added to validate the connection of the network camera. 37 User Manual of All-in-One Network Video Recorder Chapter 3 Live View 38 User Manual of All-in-One Network Video Recorder 3.1 Introduction of Live View Live view shows you the video image getting from each camera in real time. The NVR automatically enters Live View mode when powered on. It is also at the very top of the menu hierarchy, thus pressing the ESC many times (depending on which menu you’re on) brings you to the Live View mode. Live View Icons In the live view mode, there are icons at the upper-right of the screen for each channel, showing the status of the record and alarm in the channel, so that you can know whether the channel is recorded, or whether there are alarms occur as soon as possible. Table 3. 1 Description of Live View Icons Icons Description Alarm (video loss, video tampering, motion detection, sensor alarm or VCA alarm) Record (manual record, continuous record, motion detection , sensor alarm or VCA alarm triggered record) Alarm & Record Event/Exception (motion detection, sensor alarm, VCA alarm or exception information, appears at the lower-left corner of the screen. Please refer to Chapter 9.7 Setting Alarm Response Actions or details.) 39 User Manual of All-in-One Network Video Recorder 3.2 Operations in Live View Mode In live view mode, there are many functions provided. The functions are listed below. • • • Single Screen: showing only one screen on the monitor. Multi-screen: showing multiple screens on the monitor simultaneously. Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screen on the configuration menu before enabling the auto-switch. Menu > Configuration > Live View > Dwell Time • • • • • • Start Recording: continuous record and motion detection record are supported. Add IP Camera: the shortcut to the IP camera management interface. One-touch Advertising: video, audio and picture advertising are supported. Playback: playback the recorded videos for current day. PTZ Control: the shortcut to PTZ control panel. Output Mode: select the output mode to Standard, Bright, Gentle or Vivid. 3.2.1 Using the Mouse in Live View Table 3. 2 Mouse Operation in Live View Name Menu Single Screen Description Enter the main menu of the system by right clicking the mouse. Switch to the single full screen by choosing channel number from the dropdown list. Multi-screen Adjust the screen layout by choosing from the dropdown list. Previous Screen Switch to the previous screen. Next Screen Switch to the next screen. Start/Stop Auto-switch Enable/disable the auto-switch of the screens. Start Recording Start continuous recording or motion detection recording of all channels. Add IP Camera Enter the IP Camera Management interface, and manage the cameras. One-touch Advertising Start previewing advertising of video, audio or picture. Playback Enter the playback interface and start playing back the video of the selected channel immediately. PTZ Control Enter PTZ control panel and operate the buttons to control PTZ. Output Mode Four modes of output supported, including Standard, Bright, Gentle and Vivid. The dwell time of the live view configuration must be set before using Start Auto-switch. 40 User Manual of All-in-One Network Video Recorder Figure 3. 1 Right-click Menu 3.2.2 Quick Setting Toolbar in Live View Mode On the screen of each channel, there is a quick setting toolbar which shows when you single click the mouse in the corresponding screen. Figure 3. 2 Quick Setting Toolbar Table 3. 3 Description of Quick Setting Toolbar Icons Icon Description Enable/Disable / Manual Record PTZ Control Icon Description Instant Playback Digital Zoom Live View Icon / Description Mute/Audio on Image Settings Close Strategy Instant Playback only shows the record in last five minutes. If no record is found, it means there is no record during the last five minutes. Digital Zoom can zoom in the selected area to the full screen. You can left-click and draw to select the area to zoom in, as shown in Figure 3. 3. 41 User Manual of All-in-One Network Video Recorder Figure 3. 3 Digital Zoom Image Settings icon can be selected to enter the Image Settings menu. Figure 3. 4 Image Settings- Preset You can set the image parameters like brightness, contrast, saturation and hue. Figure 3. 5 Image Settings- Customize 42 User Manual of All-in-One Network Video Recorder Live View Strategy can be selected to set strategy, including Real-time, Balanced, Fluency. Figure 3. 6 Live View Strategy 43 User Manual of All-in-One Network Video Recorder 3.3 Adjusting Live View Settings Purpose: Live View settings can be customized according to different needs. You can configure the output interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc. Steps: 1. Enter the Live View Settings interface. Menu > Configuration > Live View Figure 3. 7 Live View-General The settings available in this menu include: • Video Output Interface: Designates the output to configure the settings for, and only VGA/ HDMITM is selectable by default. • Live View Mode: Designates the display mode to be used for Live View. • Dwell Time: The time in seconds to dwell between switching of channels when enabling auto-switch in Live View. • Enable Audio Output: Enables/disables audio output for the selected video output. • Event Output: Designates the output to show event video. • Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen. 2. Setting Cameras Order Figure 3. 8 Live View- Camera Order 1) 2) Select a View mode in . Select the small window, and double-click on the channel number to display the channel on the window. If you do not want the camera to be displayed on the live view interface, click the corresponding to stop it. You can click 3) button to start live view for all the channels and click Click the Apply button to save the setting. 44 to stop all the live view. User Manual of All-in-One Network Video Recorder Chapter 4 Advertising Configuration 45 User Manual of All-in-One Network Video Recorder 4.1 Importing Advertising Files Purpose: The device provides you with a function of previewing advertising files. You can import the customized videos, audios and pictures into the device as the advertising files. Before you start: 1. Decompress the installation file packaged in the CD, Double-click the FormatConverter_setup.exe file to install it. 2. Transfer the advertising files to the supported format via the FormatConverter. For detailed steps of transferring, please refer to Use Manual of Format Converter. For pictures whose resolution are not above 1080P and format are *.jpg or *.jpeg, you can execute the below steps directly. 3. Store the advertising files in a USB storage device. 4. Insert the storage device where the advertising files stored in the USB interface. Steps: 1. Enter Files Import interface. Menu > Advertising Figure 4. 1 File Import Interface 2. Click to select the file or folder you want to import. You can click the Or click the button to check the file. button to delete the file. 3. Click the Import button to import it. 4. Repeat the step 2 ~ 3 to import more files. 5. The imported files will be listed in the Advertising Preview interface. You can manage them. For detailed information, please refer to the section 4.4 Managing Advertising Files. 46 User Manual of All-in-One Network Video Recorder Supported advertising file: video, audio and picture. The maximum capacity of imported advertising files is 4GB. The maximum quantity of imported advertising files is 100. 4.2 Advertising Preview Purpose: The device will play back the advertising files which are imported in the device or stored in the root directory of USB storage device, if the advertising preview function is enabled. Two methods are available for previewing advertising: one-touch advertising and general advertising. Before you start: Import the advertising files in the device. For detailed steps, please refer to section 4.1 Importing Advertising Files. Or store the advertising files in the root directory of USB storage device and insert the USB storage device into the device. The priority of advertising files in USB storage device is higher than imported advertising files. That is to say, if there are advertising files in both USB storage device and imported files, when you start preview, the files in USB storage device will be previewed. Only when there are no advertising files in USB storage device, the imported files will be previewed. 4.2.1 One-touch Advertising Steps: 1. Enter Live View interface. 2. Right-click to pop up right-click menu. 3. Positioning the cursor to the One-touch Advertising. Figure 4. 2 Right-click Menu 4. Click to select the advertising type as Video, Audio or Picture. Then the advertising will start preview. 5. To exit the preview, you can right-click the preview image. 47 User Manual of All-in-One Network Video Recorder 4.2.2 General Advertising Steps: 1. Enter Files Import interface. Menu > Advertising Figure 4. 3 Advertising Preview Interface 2. Check the checkbox of Enable Advertising Play. 3. Select the Advertising Type as Video, Audio and Picture. 4. Click Apply to save the settings. 5. Enter Live View interface. Then the advertising will start preview. 6. To exit the preview, you can right-click the preview image. Only one type of advertising can be previewed at one time. 4.3 Advanced Configuration Purpose: When you have imported several files, you can select the files you want to preview among all the files. Besides, the sequence of selected advertising files can be configured. Steps: 1. Enter Advanced settings interface. Menu > Advertising > Advanced 48 User Manual of All-in-One Network Video Recorder Figure 4. 4 Advanced Configuration Interface 2. Select Advertising Type in the dropdown list. Advertising Type is selected as Video 1) Check the checkboxes of files you want to preview in the list of Play Sequence. 2) Click the button after the file to adjust the squence and click OK to save the setting. Figure 4. 5 Configuring Play Squence 3) Repeat the steps 2) to configure squence for other file. Advertising Type is selected as Picture 1) Select the Dwell Time in the dropdown list. Dwell Time refers to the time that previewing each picture before switching to next. The default time is 5s. 2) Check the checkboxes of files you want to preview in the list of Play Sequence. 3) Click the button after a file to adjust the sequence and click OK to save the setting. 4) Repeat the steps 3) to configure sequence for other file. Advertising Type is selected as Audio 1) Optionally, you can check the checkbox of Picture Linkage. Then the picture configured in the section Advertising Type is selected as Picture will be previewed with audio files. 2) Check the checkboxes of files you want to preview in the list of Play Sequence. 3) Click the button after a file to adjust the sequence and click OK to save the setting. 4) Repeat the steps 3) to configure sequence for other file. 3. Click OK to save the settings. 4.4 Managing Advertising Files Purpose: The imported advertising files will be listed in the Advertising Preview interface. And you can preview their 49 User Manual of All-in-One Network Video Recorder images or delete them. Steps: 1. Enter Advertising Preview interface. Menu > Advertising > Advertising Preview Figure 4. 6 Advertising Preview Interface 2. Click the Click the button to check the file button to delete the file. 50 User Manual of All-in-One Network Video Recorder Chapter 5 PTZ Controls 51 User Manual of All-in-One Network Video Recorder 5.1 Configuring PTZ Settings Purpose: Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before you control the PTZ camera. Steps: 1. Enter the PTZ Settings interface. Menu >Camera> PTZ Figure 5. 1 PTZ Settings 2. Click the RS-485 Settings button to set the RS-485 parameters. Figure 5. 2 PTZ- General 3. Choose the camera for PTZ setting in the Camera dropdown list. 4. Enter the parameters of the PTZ camera. All the parameters should be exactly the same as the PTZ camera parameters. 5. Click Apply button to save the settings. 52 User Manual of All-in-One Network Video Recorder 5.2 Setting PTZ Presets, Patrols & Patterns Before you start: Please make sure that the presets, patrols and patterns should be supported by PTZ protocols. 5.2.1 Customizing Presets Purpose: Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes place. Steps: 1. Enter the PTZ Control interface. Menu>Camera>PTZ Figure 5. 3 PTZ Settings 2. Use the directional button to wheel the camera to the location where you want to set preset; and the zoom and focus operations can be recorded in the preset as well. 3. Enter the preset No. (1~255) in the preset text field, and click the Set button to link the location to the preset. Repeat the steps2-3 to save more presets. You can click the Clear button to clear the location information of the preset, or click the Clear All button to clear the location information of all the presets. 5.2.2 Calling Presets Purpose: This feature enables the camera to point to a specified position such as a window when an event takes place. Steps: 1. Click the button PTZ in the lower-right corner of the PTZ setting interface; 53 User Manual of All-in-One Network Video Recorder Or press the PTZ button on the front panel or click the PTZ Control icon select the PTZ option in the right-click menu to show the PTZ control panel. in the quick setting bar, or 2. Choose Camera in the dropdown list. 3. Click the button to show the general settings of the PTZ control. Figure 5. 4 PTZ Panel - General 4. Click to enter the preset No. in the corresponding text field. 5. Click the Call Preset button to call it. 5.2.3 Customizing Patrols Purpose: Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before moving on to the next key point. The key points are corresponding to the presets. The presets can be set following the steps above in Customizing Presets. Steps: 1. Enter the PTZ Control interface. Menu>Camera>PTZ Figure 5. 5 PTZ Settings 2. Select patrol No. in the drop-down list of patrol. 54 User Manual of All-in-One Network Video Recorder 3. Click the Set button to add key points for the patrol. Figure 5. 6 Key point Configuration 4. Configure key point parameters, such as the key point No., duration of staying for one key point and speed of patrol. The key point is corresponding to the preset. The Key Point No. determines the order at which the PTZ will follow while cycling through the patrol. The Duration refers to the time span to stay at the corresponding key point. The Speed defines the speed at which the PTZ will move from one key point to the next. 5. Click the Add button to add the next key point to the patrol, and you can click the OK button to save the key point to the patrol. You can delete all the key points by clicking the Clear button for the selected patrol, or click the Clear All button to delete all the key pints for all patrols. 5.2.4 Calling Patrols Purpose: Calling a patrol makes the PTZ to move according the predefined patrol path. Steps: 1. Click the button PTZ in the lower-right corner of the PTZ setting interface; Or press the PTZ button on the front panel or click the PTZ Control icon select the PTZ option in the right-click menu to show the PTZ control panel. 2. Click the button to show the general settings of the PTZ control. Figure 5. 7 PTZ Panel - General 3. Select a patrol in the dropdown list and click the Call Patrol button to call it. 4. You can click the Stop Patrol button to stop calling it. 55 in the quick setting bar, or User Manual of All-in-One Network Video Recorder 5.2.5 Customizing Patterns Purpose: Patterns can be set by recording the movement of the PTZ. You can call the pattern to make the PTZ movement according to the predefined path. Steps: 1. Enter the PTZ Control interface. Menu > Camera > PTZ Figure 5. 8 PTZ Settings 2. Choose pattern number in the dropdown list. 3. Click the Start button and click corresponding buttons in the control panel to move the PTZ camera, and click the Stop button to stop it. The movement of the PTZ is recorded as the pattern. 5.2.6 Calling Patterns Purpose: Follow the procedure to move the PTZ camera according to the predefined patterns. Steps: 1. Click the button PTZ in the lower-right corner of the PTZ setting interface; Or press the PTZ button on the front panel or click the PTZ Control icon select the PTZ option in the right-click menu to show the PTZ control panel. 2. Click the button to show the general settings of the PTZ control. 56 in the quick setting bar, or User Manual of All-in-One Network Video Recorder Figure 5. 9 PTZ Panel - General 3. Click the Call Pattern button to call it. 4. Click the Stop Pattern button to stop calling it. 5.2.7 Customizing Linear Scan Limit Purpose: The Linear Scan can be enabled to trigger the scan in the horizantal direction in the predefined range. This function is supported by some certain models. Steps: 1. Enter the PTZ Control interface. Menu > Camera > PTZ Figure 5. 10 PTZ Settings 2. Use the directional button to wheel the camera to the location where you want to set the limit, and click the Left Limit or Right Limit button to link the location to the corresponding limit. 57 User Manual of All-in-One Network Video Recorder The speed dome starts linear scan from the left limit to the right limit, and you must set the left limit on the left side of the right limit, as well the angle from the left limit to the right limit should be no more than 180º. 5.2.8 Calling Linear Scan Purpose: Follow the procedure to call the linear scan in the predefined scan range. Steps: 1. Click the button PTZ in the lower-right corner of the PTZ setting interface; Or press the PTZ button on the front panel or click the PTZ Control icon enter the PTZ setting menu in live view mode. 2. Click the in the quick setting bar to button to show the one-touch function of the PTZ control. Figure 5. 11 PTZ Panel - One-touch 3. Click Linear Scan button to start the linear scan and click the Linear Scan button again to stop it. You can click the Restore button to clear the defined left limit and right limit data and the dome needs to reboot to make settings take effect. 5.2.9 One-touch Park Purpose: For some certain model of the speed dome, it can be configured to start a predefined park action (scan, preset, patrol and etc.) automatically after a period of inactivity (park time). Steps: 1. Click the button PTZ in the lower-right corner of the PTZ setting interface; Or press the PTZ button on the front panel or click the PTZ Control icon enter the PTZ setting menu in live view mode. 2. Click the button to show the one-touch function of the PTZ control. 58 in the quick setting bar to User Manual of All-in-One Network Video Recorder Figure 5. 12 PTZ Panel - One-touch 3. There are 3 one-touch park types selectable, click the corresponding button to activate the park action. Park (Quick Patrol): The dome starts patrol from the predefined preset 1 to preset 32 in order after the park time. The undefined preset will be skipped. Park (Patrol 1): The dome starts move according to the predefined patrol 1 path after the park time. Park (Preset 1): The dome moves to the predefined preset 1 location after the park time. The park time can only be set through the speed dome configuration interface, by default the value is 5s. 4. Click the button again to inactivate it. 59 User Manual of All-in-One Network Video Recorder 5.3 PTZ Control Panel To enter the PTZ control panel, there are two ways supported. OPTION 1: In the PTZ settings interface, click the PTZ button on the lower-right corner which is next to the Back button. OPTION 2: In the Live View mode, you can press the PTZ Control button on the front panel or on the remote control, or choose the PTZ Control icon , or select the PTZ option in the right-click menu. Click the Configuration button on the control panel, and you can enter the PTZ Settings interface. In PTZ control mode, the PTZ panel will be displayed when a mouse is connected with the device. If no mouse is connected, the icon appears in the lower-left corner of the window, indicating that this camera is in PTZ control mode. Figure 5. 13 PTZ Panel Table 5. 1 Description of the PTZ panel icons Icon Description Icon Description Direction button and Zoom+, Focus+, the auto-cycle button Iris+ The speed of the Switch to the PTZ control interface Description Zoom-, Focus-, Iris- Light on/off Wiper on/off Image Centralization Menu PTZ movement 3D-Zoom Icon Switch to the one-touch control interface Previous item Stop the patrol / pattern movement 60 Switch to the general settings interface Next item Start pattern / patrol Exit Minimize windows User Manual of All-in-One Network Video Recorder Chapter 6 Recording Settings 61 User Manual of All-in-One Network Video Recorder 6.1 Configuring Parameters Purpose: By configuring the parameters you can define the parameters which affect the image quality, such as the transmission stream type, the resolution and so on. Steps: 1. Enter the Record settings interface to configure the recording parameters: Menu > Record > Parameters Figure 6. 1 Recording Parameters 2. Parameters Setting for Recording 1) Select Record tab page to configure. You can configure the stream type, the resolution, and other parameters on your demand. • Pre-record: The time you set to record before the scheduled time or event. For example, when an alarm triggered the recording at 10:00, if you set the pre-record time as 5 seconds, the camera records it at 9:59:55. • Post-record: The time you set to record after the event or the scheduled time. For example, when an alarm triggered the recording ends at 11:00, if you set the post-record time as 5 seconds, it records till 11:00:05. • Expired Time: The expired time is the longest time for a record file to be kept in the HDD, if the deadline is reached, the file will be deleted. You can set the expired time to 0, and then the file will not be deleted. The actual keeping time for the file should be determined by the capacity of the HDD. • Record Audio: Check the checkbox to enable or disable audio recording. • Video Stream: Main stream and sub-stream are selectable for recording. When you select sub-stream, you can record for a longer time with the same storage space. 2) Click Apply to save the settings. 3. Parameters Settings for Sub-stream 1) Enter the Sub-stream tab page. 62 User Manual of All-in-One Network Video Recorder Figure 6. 2 Sub-stream Parameters 2) Configure the parameters of the camera. 3) Click Apply to save the settings. 63 User Manual of All-in-One Network Video Recorder 6.2 Configuring Recording Schedule Purpose: Set the recording schedule, and then the camera automatically starts/stops recording according to the configured schedule. Steps: 1. Enter the Record Schedule interface. Menu > Record > Schedule 2. Configure Record Schedule 1) Select Record Schedule. Figure 6. 3 Record Schedule 2) Choose the camera you want to configure. 3) Select the check box after the Enable Schedule item. 4) Click Edit button or click on the color icon under the edit button and draw the schedule line on the panel. Edit the schedule: I. In the message box, you can choose the day to which you want to set schedule. Figure 6. 4 Recording Schedule Interface You can click the button to set the accurate time of the schedule. II. To schedule an all-day recording, check the checkbox after the All Day item. 64 User Manual of All-in-One Network Video Recorder Figure 6. 5 Edit Schedule III. To arrange other schedule, leave the All Day checkbox blank and set the Start/End time. Up to 8 periods can be configured for each day. And the time periods cannot be overlapped each other. IV. Select the record type in the dropdown list. To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and VCA (Video Content Analysis) triggered recording and capture, you must configure the motion detection settings, alarm input settings or VCA settings as well. For detailed information, refer to Chapter 8.1, Chapter 8.2 and Chapter 8.5. The VCA settings are only available to the smart IP cameras. V. Repeat the above edit schedule steps to schedule recording for other days in the week. You can click Copy to enter the Copy to interface to copy the schedule settings to other days VI. Click Apply in the Record Schedule interface to save the settings. Draw the schedule: I. Click on the color icons, you can choose the schedule type as continuous or event. Figure 6. 6 Draw the Schedule Descriptions of the color icons are shown in the figure below. Figure 6. 7 Descriptions of the color icons 65 User Manual of All-in-One Network Video Recorder II. Click the Apply button to validate the settings. 3. (Optional) If the settings can also be used to other channels, click Copy, and then choose the channel to which you want to copy. 4. Click Apply to save the settings. 66 User Manual of All-in-One Network Video Recorder 6.3 Configuring Motion Detection Recording Purpose: Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes place, the NVR can analyze it and do many actions to handle it. Enabling motion detection function can trigger certain channels to start recording, or trigger full screen monitoring, audio warning, notify the surveillance center and so on. In this chapter, you can follow the steps to schedule a record which triggered by the detected motion. Steps: 1. Enter the Motion Detection interface. Menu > Camera > Motion 2. Configure Motion Detection 1) Choose camera you want to configure. 2) Check the checkbox after Enable Motion Detection. 3) Drag and draw the area for motion detection by mouse. If you want to set the motion detection for all the area shot by the camera, click Full Screen. To clear the motion detection area, click Clear. Figure 6. 8 Motion Detection- Mask 4) Click Settings, and the message box for channel information pop up. Figure 6. 9 Motion Detection Handling 5) Select the channels which you want the motion detection event to trigger recording. 6) Click Apply to save the settings. 67 User Manual of All-in-One Network Video Recorder 7) Click OK to back to the upper level menu. 8) Exit the Motion Detection menu. 3. Edit the Motion Detection Record Schedule. For the detailed information of schedule configuration, see Chapter Configuring Recording Schedule. 68 User Manual of All-in-One Network Video Recorder 6.4 Configuring Alarm Triggered Recording Purpose: Follow the procedure to configure alarm triggered recording. Steps: 1. Enter the Alarm setting interface. Menu > Configuration > Alarm Figure 6. 10 Alarm Settings 2. Click Alarm Input tab and set the alarm parameters. Figure 6. 11 Alarm Settings- Alarm Input 1) Select Alarm Input number and configure alarm parameters. 2) Choose N.O (normally open) or N.C (normally closed) for alarm type. 3) Check the checkbox for Enable. 4) Click Settings. 69 User Manual of All-in-One Network Video Recorder Figure 6. 12 Alarm Settings 5) Choose the alarm triggered recording channel. 6) Check the checkbox to select channel. 7) Click Apply to save settings. 8) Click OK to back to the upper level menu. Repeat the above steps to configure other alarm input parameters. If the settings can also be applied to other alarm inputs, click Copy and choose the alarm input number. Figure 6. 13 Copy Alarm Input 3. Edit the Alarm triggered record in the Record Schedule setting interface. For the detailed information of schedule configuration, see Chapter 6.2 Configuring Recording Schedule. 70 User Manual of All-in-One Network Video Recorder 6.5 Configuring VCA Triggered Recording Purpose: Perform the following steps to set the VCA alarm and trigger recording of related cameras. Steps: 1. Enter VCA Alarm interface of Camera Management and select a camera you want to detect VCA alarm. Menu > Camera > VCA The selected camera must support the VCA function. Figure 6. 14 VCA Alarm Setting Interface 2. Check the Enable VCA Alarm checkbox and click Settings button to set up its alarm response actions. Figure 6. 15 VCA Alarm Handling 3. Select the channels which you want the motion detection event to trigger recording. 4. Click Apply to save the settings. 5. Edit the VCA Alarm Record Schedule. For the detailed information of schedule configuration, see Chapter 6.2 Configuring Recording Schedule. 71 User Manual of All-in-One Network Video Recorder 6.6 Manual Recording Purpose: Follow the steps to set parameters for the manual record. Using manual record, you need to manually cancel the record. The manual recording is prior to the scheduled recording. Steps: 1. Enter the Manual settings interface. Menu > Manual Or press the REC/SHOT button on the front panel. Figure 6. 16 Manual Record 2. Enable the Manual Record. 1) Select Record on the left bar. 2) Click the status button before camera number to change to . 3. Disable manual record. Click the status button to change Green icon to . means that the channel is configured the record schedule. After rebooting, all the manual records enabled will be canceled. 72 User Manual of All-in-One Network Video Recorder 6.7 Configuring Holiday Recording Purpose: Follow the steps to configure the record schedule on holiday for that year. You may want to have different plan for recording on holiday. Steps: 1. Enter the Record setting interface. Menu > Record > Holiday Figure 6. 17 Holiday Settings 2. Enable Edit Holiday schedule. 1) Click to enter the Edit interface. Figure 6. 18 Edit Holiday Settings 2) Check the checkbox after Enable Holiday. 3) Select Mode from the dropdown list. There are three different modes for the date format to configure holiday schedule. 4) Set the start and end date. 5) Click Apply to save settings. 6) Click OK to exit the Edit interface. 3. Enter Record Schedule settings interface to edit the holiday recording schedule. See Chapter 6.2 Configuring Recording Schedule. 73 User Manual of All-in-One Network Video Recorder 6.8 Files Protection Purpose: You can lock the recorded files to protect the record files from being overwritten. Steps: 1. Enter Export setting interface. Menu > Export Figure 6. 19 Export Interface 2. Select the channels you want to investigate by checking the checkbox to . 3. Configure the record type, file type start/end time. 4. Click Search to show the results. Figure 6. 20 Export- Search Result 5. Protect the record files. 1) Find the record files you want to protect, and then click the icon which will turn to that the file is locked. The record files of which the recording is still not completed cannot be locked. 2) Click to change it to to unlock the file and the file is not protected. Figure 6. 21 Unlocking Attention 74 , indicating User Manual of All-in-One Network Video Recorder Chapter 7 Playback 75 User Manual of All-in-One Network Video Recorder 7.1 Playing Back Record Files 7.1.1 Playing Back by Channel Purpose: Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported. Instant playback by channel Steps: Choose a channel in live view mode using the mouse and click the button in the quick setting toolbar. In the instant playback mode, only record files recorded during the last five minutes on this channel will be played back. Figure 7. 1 Instant Playback Interface Playback by channel 1. Enter the Playback interface. Right click a channel in live view mode and select Playback from the menu, as shown in Figure 7. 2. 76 User Manual of All-in-One Network Video Recorder Figure 7. 2 Right-click Menu under Live View 2. Playback management. The toolbar in the bottom part of Playback interface can be used to control playing progress, as shown in Figure 7. 3. Figure 7. 3 Playback Interface Click the channel(s) to execute simultaneous playback of multiple channels. Figure 7. 4 Toolbar of Playback The indicates the start/end time of the record. Table 7. 1 Detailed Explanation of Playback Toolbar Button Operation Button Operation / Audio on/ Mute / Start/Stop clipping 77 Button Operation 30s forward User Manual of All-in-One Network Video Recorder Button Operation Button Operation 30s reverse Button Add default tag Operation Add customized tag Pause reverse play/ Tag management Speed down Reverse play/ / Single-frame reverse play Pause play/ Play/ / Single-frame play Scaling up/down the / time line Speed up Previous day Next day Full Screen Exit Stop Digital Zoom Save the clips Process bar Video type Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate special frames. 7.1.2 Playing Back by Time Purpose: Play back video files recorded in specified time duration. Multi-channel simultaneous playback and channel switch are supported. Steps: 1. Enter playback interface. Menu > Playback 2. Check the checkbox of channel(s) in the channel list and then double-click to select a date on the calendar to start playback. Figure 7. 5 Playback Calendar If there are record files for that camera in that day, in the calendar, the icon for that day is displayed as Otherwise it is displayed as . 78 . User Manual of All-in-One Network Video Recorder Figure 7. 6 Interface of Playback by Time 7.1.3 Playing Back by Event Search Purpose: Play back record files on one or several channels searched out by restricting event type (e.g. alarm input and motion detection). Steps: 1. Enter the Playback interface. Menu > Playback 2. Select the Event in the drop-down list on the top-left side. 3. Select Alarm Input, Motion or VCA as the event type, edit the Start time and End time. Here we take playback by motion as the example. 79 User Manual of All-in-One Network Video Recorder Figure 7. 7 Motion Search Interface 4. Click Search button to get the search result information. You may refer to the right-side bar for the result. Figure 7. 8 Search Result Bar 5. Click button to play back the file. You can click the Back button to back to the search interface. Pre-play and post-play can be configured. 6. Playback interface. The toolbar in the bottom part of Playback interface can be used to control playing process. 80 User Manual of All-in-One Network Video Recorder Figure 7. 9 Interface of Playback by Event 7.1.4 Playing Back by Tag Purpose: Video tag allows you to record related information like people and location of a certain time point during playback. You are also allowed to use video tag(s) to search for record files and position time point. Before playing back by tag: 1. Enter Playback interface. Menu > Playback 2. Search and play back the record file(s). Refer to Chapter 6.1.1 for the detailed information about searching and playback of the record files. Figure 7. 10 Interface of Playback by Time Click button to add default tag. 81 User Manual of All-in-One Network Video Recorder Click button to add customized tag and input tag name. Max. 64 tags can be added to a single video file. 3. Tag management. Click button to check, edit and delete tag(s). Figure 7. 11 Tag Management Interface Steps: 1. Select the Tag from the drop-down list in the Playback interface. 2. Choose channels, edit start time and end time, and then click Search to enter Search Result interface. You can enter keyword in the textbox to search the tag on your command. Figure 7. 12 Video Search by Tag 3. Click button to play back the file. You can click the Back button to back to the search interface. 82 User Manual of All-in-One Network Video Recorder Pre-play and post-play can be configured. Figure 7. 13 Interface of Playback by Tag 7.1.5 Smart Playback Purpose: The smart playback function provides an easy way to get through the less effective information. When you select the smart playback mode, the system will analyze the video containing the motion or VCA information, mark it with green color and play it in the normal speed while the video without motion will be played in the 16-time speed. The smart playback rules and areas are configurable. Before you start: To get the smart search result, the corresponding event type must be enabled and configured on the IP camera. Here we take the intrusion detection as an example. 1. Log in the IP camera by the web browser, and enable the intrusion detection by checking the checkbox of it. You may enter the motion detection configuration interface by Configuration > Advanced Configuration > Events > Intrusion Detection. Figure 7. 14 Setting Intrusion Detection on IP Camera 2. Configure the required parameters of intrusion detection, including area, arming schedule and linkage methods. Refer to the user manual of smart IP camera for detailed instructions. Steps: 1. Enter Playback interface. Menu > Playback 2. Select the Smart in the drop-down list on the top-left side. 83 User Manual of All-in-One Network Video Recorder Figure 7. 15 Smart Playback Interface Table 7. 2 Detailed Explanation of Smart Playback Button Operation Button Operation Button Stop / Smart search Operation Pause play / Play Scaling Process bar / up/down the Playback type time line 3. Select a camera in the camera list and select a date in the calendar. 4. Edit the smart search areas and rules. 1) Click the by default. button to enter the search area editing interface; the smart search area is set as full screen Figure 7. 16 Draw Area of Smart Search 2) Set the rules and areas. 84 User Manual of All-in-One Network Video Recorder Intrusion Detection Click the button, and then specify 4 points to set a quadrilateral region for intrusion detection. Only one region can be set. Motion Detection i. Click the to set the search area manually. ii. Click and drag the mouse to draw target searching area(s), or click the screen as the area. 3) Click the to search, and then the result will be displayed as Playback interface. Or you can click the 5. Click the button to set the full in the progress bar of the Smart button to clear all the set areas. button to play. Figure 7. 17 Smart Search Result Playback progress bar: use the mouse to click any point of the progress bar to locate specific frames. 7.1.6 Playing Back by System Logs Purpose: Play back record file(s) associated with channels after searching system logs. Steps: 1. Enter Log Information interface. Menu > Maintenance > Log Information 2. Click Log Search tab to enter Playback by System Logs. Set search time and type and click Search button. 85 User Manual of All-in-One Network Video Recorder Figure 7. 18 System Log Search Interface 3. Choose a log with record file and click button to enter Playback interface. If there is no record file at the time point of the log, the message box “No result found” will pop up. Figure 7. 19 Result of System Log Search 4. Playback interface. The toolbar in the bottom part of Playback interface can be used to control playing process. 86 User Manual of All-in-One Network Video Recorder Figure 7. 20 Interface of Playback by Log 7.1.7 Playing Back External File Purpose: Perform the following steps to look up and play back files in the external devices. Steps: 1. Enter Tag Search interface. Menu > Playback 2. Select the External File in the drop-down list on the top-left side. The files are listed in the right-side list. You can click the 3. Select and click the button to refresh the file list. button to play back it. And you can adjust the playback speed by clicking . Figure 7. 21 Interface of External File Playback 87 and User Manual of All-in-One Network Video Recorder 7.2 Auxiliary Functions of Playback 7.2.1 Playing Back Frame by Frame Purpose: Play video files frame by frame, in case of checking image details of the video when abnormal events happen. Steps: 1. Enter Playback interface. 2. If you choose playback of the record file: click button until the speed changes to Single frame and one click on the playback screen represents playback of one frame. If you choose reverse playback of the record file: click button until the speed changes to Single frame and one click on the playback screen represents reverse playback of one frame. It is also feasible to use button in toolbar. 7.2.2 Digital Zoom Steps: 1. Click the button on the playback control bar to enter Digital Zoom interface. 2. Use the mouse to draw a red rectangle and the image within it will be enlarged up to 16 times. Figure 7. 22 Draw Area for Digital Zoom 3. Right-click the image to exit the digital zoom interface. 7.2.3 Reverse Playback of Multi-channel Purpose: You can play back record files of multi-channel reversely. Up to 16-ch (with 1280*720 resolution) simultaneous reverse playback is supported; up to 4-ch (with 1920*1080P resolution) simultaneous reverse playback is 88 User Manual of All-in-One Network Video Recorder supported and up to 1-ch (with 2560*1920 resolution) reverse playback is supported. Steps: 1. Enter Playback interface. Menu > Playback 2. Check more than one checkboxes to select multiple channels and click to select a date on the calendar. Figure 7. 23 4-ch Synchronous Playback Interface 3. Click to play back the record files reversely. 89 User Manual of All-in-One Network Video Recorder Chapter 8 Backup 90 User Manual of All-in-One Network Video Recorder 8.1 Backing up Record Files 8.1.1 Quick Export Purpose: Export record files to backup device(s) quickly. Steps: 1. Enter Video Export interface. Menu > Export > Normal Choose the channel(s) you want to back up and click Quick Export button. The time duration of record files on a specified channel cannot exceed one day. Otherwise, the message box “Max. 24 hours are allowed for quick export.” will pop up. Figure 8. 1 Quick Export Interface 2. Click on the Export button to start exporting. Here we use USB Flash Drive and please refer to the next section Normal Backup for more backup devices supported by the NVR. Figure 8. 2 Quick Export using USB1-1 Stay in the Exporting interface until all record files are exported. 3. Check backup result. Choose the record file in Export interface and click button 91 to check it. User Manual of All-in-One Network Video Recorder The Player player.exe will be exported automatically during record file export. Figure 8. 3 Checkup of Quick Export Result Using USB1-1 8.1.2 Backing up by Normal Video Search Purpose: The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB writer). Backup using USB flash drives and USB HDDs Steps: 1. Enter Export interface. Menu > Export > Normal 2. Set search condition and click Search button to enter the search result interface. Figure 8. 4 Normal Video Search for Backup 3. Select record files you want to back up. Click to play the record file if you want to check it. Check the checkbox before the record files you want to back up. The size of the currently selected files is displayed in the lower-left corner of the window. 92 User Manual of All-in-One Network Video Recorder Figure 8. 5 Result of Normal Video Search for Backup 4. Export. Click Export All button to export all the recording files. Or you can select recording files you want to back up, and click Export button to enter Export interface. If the inserted USB device is not recognized: • Click the Refresh button. • Reconnect device. • Check for compatibility from vendor. You can also format USB flash drives or USB HDDs via the device. Figure 8. 6 Export by Normal Video Search using USB Flash Drive Stay in the Exporting interface until all record files are exported with pop-up message box “Export finished”. 5. Check backup result. Choose the record file in Export interface and click button to check it. The Player player.exe will be exported automatically during record file export. 93 User Manual of All-in-One Network Video Recorder Figure 8. 7 Checkup of Export Result using USB Flash Drive Backup using USB writer Steps: 1. Enter Export interface. Menu > Export > Normal 2. Set search condition and click Search button to enter the search result interface. Figure 8. 8 Normal Video Search for Backup 3. Select record files you want to back up. Click button to play the record file if you want to check it. Check the checkbox before the record files you want to back up. The size of the currently selected files is displayed in the lower-left corner of the window. Figure 8. 9 Result of Normal Video Search for Backup 94 User Manual of All-in-One Network Video Recorder 4. Export. Click Export button and start backup. If the inserted USB writer or SATA writer is not recognized: • • • Click the Refresh button. Reconnect device. Check for compatibility from vendor. Figure 8. 10 Export by Normal Video Search using USB Writer Stay in the Exporting interface until all record files are exported with pop-up message box “Export finished”. 5. Check backup result. Choose the record file in Export interface and click button to check it. The Player player.exe will be exported automatically during record file export. Figure 8. 11 Checkup of Export Result using USB Writer 8.1.3 Backing up by Event Search Purpose: 95 User Manual of All-in-One Network Video Recorder Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer) and SATA writer. Quick Backup and Normal Backup are supported. Steps: 1. Enter Export interface. Menu > Export > Event 1) Select “Alarm Input” from the dropdown list of Event Type. 2) Select the alarm input No. and time. 3) Click Search button to enter the Search Result interface. • Event types contain Alarm Input, Motion and VCA. Figure 8. 12 Event Search for Backup 2. Select record files to export. 1) Clicking Quick Export button will export record files of all channels triggered by the selected alarm input. Figure 8. 13 Result of Event Search 96 User Manual of All-in-One Network Video Recorder 2) Click Details button to view detailed information of the record file, e.g. start time, end time, file size, etc. Figure 8. 14 Event Details Interface 3. Export. Click Export All button to export all the recording files. Or you can select recording files you want to back up, and click Export button to enter Export interface. If the inserted USB device is not recognized: • Click the Refresh button. • Reconnect device. • Check for compatibility from vendor. You can also format USB flash drive or USB HDDs via the device. Figure 8. 15 Export by Event Using USB Flash Drive Stay in the Exporting interface until all record files are exported with pop-up message “Export finished”. 97 User Manual of All-in-One Network Video Recorder Figure 8. 16 Export Finished 4. Check backup result. The Player player.exe will be exported automatically during record file export. 8.1.4 Backing up Video Clips Purpose: You may also select video clips to export directly during Playback, using USB devices (USB flash drives, USB HDDs, USB writer) or SATA writer. Steps: 1. Enter Playback interface. Please refer to Chapter 7.1 Playing Back Record Files. 2. During playback, use buttons and in the playback toolbar to start or stop clipping record file(s). 3. Click the to save the video clips. Or the promption of saving clips will pop up when you quit the playback interface. A maximum of 30 clips can be selected for each channel. Figure 8. 17 Clips Export Interface 4. Export. Click Export button and start backup. 98 User Manual of All-in-One Network Video Recorder If the inserted USB device is not recognized: • Click the Refresh button. • Reconnect device. • Check for compatibility from vendor. You can also format USB flash drive or USB HDDs via the device. Figure 8. 18 Export Video Clips Using USB Flash Drive Stay in the Exporting interface until all record files are exported with pop-up message “Export finished”. 5. Check backup result. The Player player.exe will be exported automatically during record file export. 99 User Manual of All-in-One Network Video Recorder 8.2 Managing Backup Devices Management of USB flash drives and USB HDDs Steps: 1. Enter Search Result interface of record files. Menu > Export > Normal Set search condition and click Search button to enter Search Result interface. At least one channel shall be selected. Figure 8. 19 Normal Video Search for Backup 2. Click Export All button to export all the recording files. Or you can select recording files you want to back up, and click Export button to enter Export interface. At least one record file shall be selected. Figure 8. 20 Result of Normal Video Search for Backup 3. Backup device management. Click New Folder button if you want to create a new folder in the backup device. Select a record file or folder in the backup device and click Select a record file in the backup device and click Click Format button to format the backup device. 100 button if you want to delete it. button to play it. User Manual of All-in-One Network Video Recorder If the inserted USB device is not recognized: • Click the Refresh button. • Reconnect device. • Check for compatibility from vendor. Figure 8. 21 USB Flash Drive Management Management of USB writers and DVD-R/W 1. Enter Search Result interface of record files. Menu > Export > Normal Set search condition and click Search button to enter Search Result interface. At least one channel shall be selected. Figure 8. 22 Normal Video Search for Backup 2. Select record files you want to back up. Click Export All button to export all the recording files. Or you can select recording files you want to back up, and click Export button to enter Export interface. At least one recording file shall be selected. 101 User Manual of All-in-One Network Video Recorder Figure 8. 23 Result of Normal Video Search for Backup 3. Backup device management. Click Erase button if you want to erase the files from a re-writable CD/DVD. There must be a re-writable CD/DVD when you make this operation. If the inserted USB writer or DVD-R/W is not recognized: • Click the Refresh button. • Reconnect device. • Check for compatibility from vendor. Figure 8. 24 USB Writer Management 102 User Manual of All-in-One Network Video Recorder Chapter 9 Alarm Settings 103 User Manual of All-in-One Network Video Recorder 9.1 Setting Motion Detection Alarm Steps: 1. Enter Motion Detection interface of Camera Management and choose a camera you want to set up motion detection. Menu > Camera > Motion 2. Set up detection area and sensitivity. Tick Enable Motion Detection, and use the mouse to draw detection area(s) and drag the sensitivity bar to set sensitivity. By default, the motion detection is enabled and configured in full screen. Click button and set alarm response actions. Figure 9. 1 Motion Detection Setup Interface 3. Click Trigger Channel tab and select one or more channels which will start to record or become full-screen monitoring when motion alarm is triggered, and click Apply to save the settings. Figure 9. 2 Set Trigger Camera of Motion Detection 4. Set up arming schedule of the channel. 1) Select Arming Schedule tab to set the arming schedule of handling actions for the motion detection. 2) Choose one day of a week and up to eight time periods can be set within each day. 3) Click Apply to save the settings 104 User Manual of All-in-One Network Video Recorder Time periods shall not be repeated or overlapped. Figure 9. 3 Set Arming Schedule of Motion Detection 5. Click Handling tab to set up alarm response actions of motion alarm (please refer to Chapter Setting Alarm Response Actions). 6. If you want to set motion detection for another channel, repeat the above steps or just click Copy in the Motion Detection interface to copy the above settings to it. 105 User Manual of All-in-One Network Video Recorder 9.2 Setting Sensor Alarms Purpose: Set the handling action of an external sensor alarm. Steps: 1. Enter Alarm Settings of System Configuration and select an alarm input. Menu > Configuration > Alarm Figure 9. 4 Alarm Status Interface of System Configuration 2. Select Alarm Input tab to enter Alarm Input Settings interface. 3. Set up the handling action of the selected alarm input. Check the Enable checkbox and click Settings button to set up its alarm response actions. Figure 9. 5 Alarm Input Setup Interface 4. Select Trigger Channel tab and select one or more channels which will start to record or become full-screen monitoring when an external alarm is input, and click Apply to save the settings. 5. Select Arming Schedule tab to set the arming schedule of handling actions. 106 User Manual of All-in-One Network Video Recorder Figure 9. 6 Set Arming Schedule of Alarm Input Choose one day of a week and Max. eight time periods can be set within each day, and click Apply to save the settings. Time periods shall not be repeated or overlapped. Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to copy an arming schedule to other days. 6. Select Linkage Action tab to set up alarm response actions of the alarm input (please refer to Chapter 9.2 Setting Alarm Response Actions). 7. If necessary, select PTZ Linking tab and set PTZ linkage of the alarm input. Set PTZ linking parameters and click OK to complete the settings of the alarm input. Please check whether the PTZ or speed dome supports PTZ linkage. One alarm input can trigger presets, patrol or pattern of more than one channel. But presets, patrols and patterns are exclusive. Figure 9. 7 Set PTZ Linking of Alarm Input 8. If you want to set handling action of another alarm input, repeat the above steps. Or you can click the Copy button on the Alarm Input Setup interface and check the checkbox of alarm 107 User Manual of All-in-One Network Video Recorder inputs to copy the settings to them. Figure 9. 8 Copy Settings of Alarm Input 108 User Manual of All-in-One Network Video Recorder 9.3 Detecting Video Loss Alarm Purpose: Detect video loss of a channel and take alarm response action(s). Steps: 1. Enter Video Loss interface of Camera Management and select a channel you want to detect. Menu > Camera > Video Loss Figure 9. 9 Video Loss Setup Interface 2. Set up handling action of video loss. Check the checkbox of “Enable Video Loss Alarm”, and click button to set up handling action of video loss. 3. Set up arming schedule of the handling actions. 1) Select Arming Schedule tab to set the channel’s arming schedule. 2) Choose one day of a week and up to eight time periods can be set within each day. 3) Click Apply button to save the settings. Time periods shall not be repeated or overlapped. Figure 9. 10 Set Arming Schedule of Video Loss 4. Select Linkage Action tab to set up alarm response action of video loss (please refer to Chapter Setting Alarm Response Actions). 5. Click the OK button to complete the video loss settings of the channel. 109 User Manual of All-in-One Network Video Recorder 9.4 Detecting Video Tampering Alarm Purpose: Trigger alarm when the lens is covered and take alarm response action(s). Steps: 1. Enter Video Tampering interface of Camera Management and select a channel you want to detect video tampering. Menu > Camera > Video Tampering Figure 9. 11 Video Tampering Setup Interface 2. Set the video tampering handling action of the channel. Check the checkbox of Enable Video Tampering Detection. Drag the sensitivity bar to set a proper sensitivity level. Use the mouse to draw an area you want to detect video tampering. Click button to set up handling action of video tampering. 3. Set arming schedule and alarm response actions of the channel. 1) Click Arming Schedule tab to set the arming schedule of handling actions. 2) Choose one day of a week and max. eight time periods can be set within each day. 3) Click Apply button to save the settings. Time periods shall not be repeated or overlapped. 110 User Manual of All-in-One Network Video Recorder Figure 9. 12 Set Arming Schedule of Video Tampering 4. Select Linkage Action tab to set up alarm response actions of video tampering alarm (please refer to Chapter 9.7 Setting Alarm Response Actions). 5. Click the OK button to complete the video tampering settings of the channel. 111 User Manual of All-in-One Network Video Recorder 9.5 Detecting VCA Alarm Purpose: The NVR can receive the VCA alarm sent by IP camera, and the VCA detection must be enabled and configured on the IP camera settings interface first. Refer to the user manual of IP camera for detailed instructions to set the VCA rules. Steps: 1. Enter VCA Alarm interface of Camera Management and select a camera you want to detect VCA alarm. Menu > Camera > VCA The selected camera must support the VCA function. Figure 9. 13 VCA Alarm Setting Interface 2. Check the Enable VCA Alarm checkbox and click Settings button to set up its alarm response actions. 3. Select Trigger Channel tab and select one or more channels which will start to record or become full-screen monitoring when a VCA alarm is triggered, and click Apply to save the settings. 4. Select Arming Schedule tab to set the arming schedule of handling actions. Figure 9. 14 Set Arming Schedule of VCA Alarm Choose one day of a week and Max. eight time periods can be set within each day, and click Apply to save the settings. 112 User Manual of All-in-One Network Video Recorder Time periods shall not be repeated or overlapped. Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to copy an arming schedule to other days. 5. Select Linkage Action tab to set up alarm response actions of the alarm input (please refer to Chapter 9.7 Setting Alarm Response Actions). 6. If necessary, select PTZ Linking tab and set PTZ linkage of the VCA alarm, refer to step 6 of Chapter 9.2 Setting Sensor Alarms. 7. Click the OK button to complete the VCA alarm settings of the channel. 113 User Manual of All-in-One Network Video Recorder 9.6 Handling Exceptions Alarm Purpose: Exception settings refer to the handling action of various exceptions, e.g. • • • • • • HDD Full: The HDD is full. HDD Error: Writing HDD error or unformatted HDD. Network Disconnected: Disconnected network cable. IP Conflicted: Duplicated IP address. Illegal Login: Incorrect user ID or password. Record Exception: No space for saving recorded files. Step: Enter Exception interface of System Configuration and handle various exceptions. Menu > Configuration > Exceptions Please refer to Chapter 9.7 Setting Alarm Response Actions for detailed alarm response actions. Figure 9. 15 Exceptions Setup Interface 114 User Manual of All-in-One Network Video Recorder 9.7 Setting Alarm Response Actions Purpose: Alarm response actions will be activated when an alarm or exception occurs, including Event Hint Display, Full Screen Monitoring, Audible Warning (buzzer), Notify Surveillance Center, Upload Picture to FTP, Trigger Alarm Output and Send Email. Event Hint Display When an event or exception happens, a hint can be displayed on the lower-left corner of live view image. And you can click the hint icon to check the details. Besides, the event to be displayed is configurable. Steps: 1. Enter the Exception settings interface. Menu > Configuration > Exceptions 2. Check the checkbox of Enable Event Hint. Figure 9. 16 Event Hint Settings Interface 3. Click the to set the type of event to be displayed on the image. Figure 9. 17 Event Hint Settings Interface 4. Click the OK button to finish settings. Full Screen Monitoring When an alarm is triggered, the local monitor (VGA and HDMITM monitor) display in full screen the video image from the alarming channel configured for full screen monitoring. If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an interval of 10 seconds (default dwell time). A different dwell time can be set by going to Menu >Configuration>Live View > Full Screen Monitoring Dwell Time. Auto-switch will terminate once the alarm stops and you will be taken back to the Live View interface. 115 User Manual of All-in-One Network Video Recorder You must select during “Trigger Channel” settings the channel(s) you want to make full screen monitoring. Audible Warning Trigger an audible beep when an alarm is detected. Notify Surveillance Center Sends an exception or alarm signal to remote alarm host when an event occurs. The alarm host refers to the PC installed with Remote Client. The alarm signal will be transmitted automatically at detection mode when remote alarm host is configured. Please refer to Chapter Configuring Remote Alarm Host for details of alarm host configuration. Email Linkage Send an email with alarm information to a user or users when an alarm is detected. Please refer to Chapter 10.2.9 for details of Email configuration. Trigger Alarm Output Trigger an alarm output when an alarm is triggered. 1. Enter Alarm Output interface. Menu > Configuration > Alarm > Alarm Output 2. Select an alarm output and set alarm name and dwell time. Click Schedule button to set the arming schedule of alarm output. If “Manually Clear” is selected in the dropdown list of Dwell Time, you can clear it only by going to Menu > Manual > Alarm. Figure 9. 18 Alarm Output Setup Interface 3. Set up arming schedule of the alarm output. Choose one day of a week and up to 8 time periods can be set within each day. Time periods shall not be repeated or overlapped. 116 User Manual of All-in-One Network Video Recorder Figure 9. 19 Set Arming Schedule of Alarm Output 4. Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to copy an arming schedule to other days. Click the OK button to complete the video tampering settings of the alarm output No. 5. You can also copy the above settings to another channel. Figure 9. 20 Copy Settings of Alarm Output 117 User Manual of All-in-One Network Video Recorder 9.8 Triggering or Clearing Alarm Output Manually Purpose: Sensor alarm can be triggered or cleared manually. If “Manually Clear” is selected in the dropdown list of dwell time of an alarm output, the alarm can be cleared only by clicking Clear button in the following interface. Steps: 1. Select the alarm output you want to trigger or clear and make related operations. Menu > Manual > Alarm 2. Click Trigger/Clear button if you want to trigger or clear an alarm output. Click Trigger All button if you want to trigger all alarm outputs. Click Clear All button if you want to clear all alarm output. Figure 9. 21 Clear or Trigger Alarm Output Manually 118 User Manual of All-in-One Network Video Recorder Chapter 10 Network Settings 119 User Manual of All-in-One Network Video Recorder 10.1 Configuring General Settings Purpose: Network settings must be properly configured before you operate NVR over network. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network 2. Select the General tab. Figure 10. 1 Network Settings Interface 3. In the General Settings interface, you can configure the following settings: Working Mode, NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server. If the DHCP server is available, you can click the checkbox of DHCP to automatically obtain an IP address and other network settings from that server. The valid value range of MTU is 500 ~ 9676. 4. After having configured the general settings, click Apply button to save the settings. 120 User Manual of All-in-One Network Video Recorder 10.2 Configuring Advanced Settings 10.2.1 Configuring PPPoE Settings Purpose: Your NVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE). Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network 2. Select the PPPoE tab to enter the PPPoE Settings interface, as shown in Figure 10. 2. Figure 10. 2 PPPoE Settings Interface 3. Check the PPPoE checkbox to enable this feature. 4. Enter User Name, and Password for PPPoE access. The User Name and Password should be assigned by your ISP. 5. Click the Apply button to save and exit the interface. 6. After successful settings, the system asks you to reboot the device to enable the new settings, and the PPPoE dial-up is automatically connected after reboot. You can go to Menu >Maintenance>System Info >Network interface to view the status of PPPoE connection. Please refer to Chapter 13.1 Viewing System Information for PPPoE status. 10.2.2 Configuring Extranet Access Configuring EZVIZ Cloud P2P Purpose: EZVIZ Cloud P2P provides the mobile phone application and as well the service platform page to access and manage your connected NVR, which enables you to get a convenient remote access to the surveillance system. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network 2. Select the Extranet Access tab to enter the EZVIZ Cloud P2P Settings interface. 3. Check the Enable EZVIZ Cloud P2P checkbox to activate this feature. 4. If required, check the Enable Stream Encryption checkbox to encrypt the video stream. 5. Enter the verification code of the device. 121 User Manual of All-in-One Network Video Recorder The verification code consists of 6 capital letters and is located at the bottom of the NVR. The device at the version 3.0.4 or above has its verification code automatically available in the filed by default; for device of older version, you need to input any 6 capital letters in the text filed. Figure 10. 3 EZVIZ Cloud P2P Settings Interface 6. Click the Apply button to save and exit the interface. After configuration, you can access and manage the NVR by your mobile phone on which the EZVIZ Cloud P2P application is installed or by the EZVIZ website (www.ezviz7.com). For more operation instructions, please refer to the help file on the EZVIZ official website (www.ezviz7.com). Configuring DDNS Purpose: If your NVR is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to be used for network access. Prior registration with your ISP is required before configuring the system to use DDNS. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network 2. Select the Extranet Access tab to enter the DDNS Settings interface, as shown in Figure 10. 4. Figure 10. 4 DDNS Settings Interface 3. Check the DDNS checkbox to enable this feature. 122 User Manual of All-in-One Network Video Recorder 4. Select DDNS Type. Five different DDNS types are selectable: IPServer, DynDNS, PeanutHull, NO-IP and HiDDNS. • IPServer: Enter Server Address for IPServer. Figure 10. 5 IPServer Settings Interface • DynDNS: 1) Enter Server Address for DynDNS (i.e. members.dyndns.org). 2) In the NVR Domain Name text field, enter the domain obtained from the DynDNS website. 3) Enter the User Name and Password registered in the DynDNS website. Figure 10. 6 DynDNS Settings Interface • PeanutHull: Enter the User Name and Password obtained from the PeanutHull website. Figure 10. 7 PeanutHull Settings Interface • NO-IP: Enter the account information in the corresponding fields. Refer to the DynDNS settings. 1) Enter Server Address for NO-IP. 2) In the NVR Domain Name text field, enter the domain obtained from the NO-IP website (www.no-ip.com). 3) Enter the User Name and Password registered in the NO-IP website. 123 User Manual of All-in-One Network Video Recorder Figure 10. 8 NO-IP Settings Interface • HiDDNS: 1) The Server Address of the HiDDNS server appears by default: www.hik-online.com. 2) Enter the Device Domain Name. You can use the alias you registered in the HiDDNS server or define a new device domain name. If a new alias of the device domain name is defined in the NVR, it will replace the old one registered on the server. You can register the alias of the device domain name in the HiDDNS server first and then enter the alias to the Device Domain Name in the NVR; you can also enter the domain name directly on the NVR to create a new one. Figure 10. 9 HiDDNS Settings Interface Register the device on the HiDDNS server. 1) Go to the HiDDNS website: www.hik-online.com. 2) Click to register an account if you do not have one and use the account to log in. Figure 10. 10 Register an Account 3) In the Device Management interface, click 124 to register the device. User Manual of All-in-One Network Video Recorder Figure 10. 11 Register the Device The device name can only contain the lower-case English letter, numeric and ‘-’; and it must start with the lower-case English letter and cannot end with ‘-’. Access the Device via Web Browser or Client Software After having successfully registered the device on the HiDDNS server, you can access your device via web browser or Client Software with the Device Domain Name (Device Name). OPTION 1: Access the Device via Web Browser Open a web browser, and enter http://www.hik-online.com/alias in the address bar. Alias refers to the Device Domain Name on the device or the Device Name on the HiDDNS server. Example: http://www.hik-online.com/nvr If you mapped the HTTP port on your router and changed it to port No. except 80, you have to enter http://www.hik-online.com/alias:HTTP port in the address bar to access the device. You can refer to Chapter 9.2.11 for the mapped HTTP port No. OPTION 2: Access the devices via iVMS-4200 For iVMS-4200, in the Add Device window, select and then edit the device information. Nickname: Edit a name for the device as you want. Server Address: www.hik-online.com Device Domain Name: It refers to the Device Domain Name on the device or the Device Name on the HiDDNS server you created. User Name: Enter the user name of the device. By default it is admin. Password: Enter the password of the device. By default it is 12345. Figure 10. 12 Access Device via iVMS-4200 125 User Manual of All-in-One Network Video Recorder 5. Click the Apply button to save the settings. After setting all the required parameters for the DDNS, you can view the connecting status of the device by checking the Status information. 10.2.3 Configuring NTP Server Purpose: Ensure the network connection of the PC (running FTP server) and the device is valid and correct. Run the FTP server on the PC and copy the firmware into the corresponding directory of your PC. Refer to the user manual of the FTP server to set the FTP server on your PC and put the firmware file into the directory as required. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network 2. Select the NTP tab to enter the NTP Settings interface, as shown in Figure 10. 13. Figure 10. 13 NTP Settings Interface 3. Check the Enable NTP checkbox to enable this feature. 4. Configure the following NTP settings: • Interval: Time interval between the two synchronizing actions with NTP server. The unit is minute. • NTP Server: IP address of NTP server. • NTP Port: Port of NTP server. 5. Click the Apply button to save and exit the interface. The time synchronization interval can be set from1 to 10080min, and the default value is 60min. If the NVR is connected to a public network, you should use a NTP server that has a time synchronization function, such as the server at the National Time Center (IP Address: 210.72.145.44). If the NVR is setup in a more customized network, NTP software can be used to establish a NTP server used for time synchronization. 10.2.4 Configuring SNMP Purpose: You can use SNMP protocol to get device status and parameters related information. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network 126 User Manual of All-in-One Network Video Recorder 2. Select the SNMP tab to enter the SNMP Settings interface, as shown in Figure 10. 14. Figure 10. 14 SNMP Settings Interface 3. Check the SNMP checkbox to enable this feature. 4. Configure the following SNMP settings: • Trap Address: IP Address of SNMP host. • Trap Port: Port of SNMP host. 5. Click the Apply button to save and exit the interface. Before setting the SNMP, please download the SNMP software and manage to receive the device information via SNMP port. By setting the Trap Address, the NVR is allowed to send the alarm event and exception message to the surveillance center. 10.2.5 Configuring Remote Alarm Host Purpose: With a remote alarm host configured, the NVR will send the alarm event or exception message to the host when an alarm is triggered. The remote alarm host must have the Network Video Surveillance software installed. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network 2. Select the More Settings tab to enter the More Settings interface, as shown in Figure 10. 15. Figure 10. 15 More Settings Interface 3. Enter Alarm Host IP and Alarm Host Port in the text fields. The Alarm Host IP refers to the IP address of the remote PC on which the Network Video Surveillance Software (e.g., iVMS-4200) is installed, and the Alarm Host Port must be the same as the alarm monitoring port configured in the software. 4. Click the Apply button to save and exit the interface. 127 User Manual of All-in-One Network Video Recorder 10.2.6 Configuring Multicast Purpose: The multicast can be configured to realize live view for more than 128 connections through network for the device. A multicast address spans the Class-D IP range of 224.0.0.0 to239.255.255.255. It is recommended to use the IP address ranging from 239.252.0.0 to 239.255.255.255. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network 2. Select the More Settings tab to enter the More Settings interface, as shown in Figure 10. 15. 3. Set Multicast IP, as shown in Figure 10. 16. When adding a device to the Network Video Surveillance Software, the multicast address must be the same as the NVR’s multicast IP. Figure 10. 16 Configure Multicast 4. Click the Apply button to save and exit the interface. The multicast function should be supported by the network switch to which the NVR is connected. 10.2.7 Configuring RTSP Purpose: The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in communication systems to control streaming media servers. Steps: 1. Enter the Network Settings menu Menu > Configuration > Network 2. Select the More Settings tab to enter the More Settings menu, as shown in Figure 10. 15. Figure 10. 17 RTSP Settings Interface 3. Enter the RTSP port in the text field of RTSP Service Port. The default RTSP port is 554, and you can change it according to different requirements. 4. Click the Apply button to save and exit the menu. 10.2.8 Configuring Server and HTTP Ports Purpose: You can change the server and HTTP ports in the Network Settings menu. The default server port is 8000 and the 128 User Manual of All-in-One Network Video Recorder default HTTP port is 80. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network 2. Select the More Settings tab to enter the More Settings interface, as shown in Figure 10. 15. 3. Enter new Server Port and HTTP Port. Figure 10. 18 Host/Others Settings Menu 4. Enter the Server Port and HTTP Port in the text fields. The default Server Port is 8000 and the HTTP Port is 80, and you can change them according to different requirements. 5. Click the Apply button to save and exit the interface. The Server Port should be set to the range of 2000-65535 and it is used for remote client software access. The HTTP port is used for remote web browser access. 10.2.9 Configuring Email Purpose: The system can be configured to send an Email notification to all designated users if an alarm event is detected, etc., an alarm or motion event is detected or the administrator password is changed. Before configuring the Email settings, the NVR must be connected to a local area network (LAN) that maintains an SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the location of the e-mail accounts to which you want to send notification. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network 2. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the Network Settings menu, as shown in Figure 10. 19. Figure 10. 19 Network Settings Interface 129 User Manual of All-in-One Network Video Recorder 3. Click Apply to save the settings. 4. Select the Email tab to enter the Email Settings interface. Figure 10. 20 Email Settings Interface 5. Configure the following Email settings: Enable Server Authentication (optional): Check the checkbox to enable the server authentication feature. User Name: The user account of sender’s Email for SMTP server authentication. Password: The password of sender’s Email for SMTP server authentication. SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com). SMTP Port No.: The SMTP port. The default TCP/IP port used for SMTP is 25. Enable SSL (optional): Click the checkbox to enable SSL if required by the SMTP server. Sender: The name of sender. Sender’s Address: The Email address of sender. Select Receivers: Select the receiver. Up to 3 receivers can be configured. Receiver: The name of user to be notified. Receiver’s Address: The Email address of user to be notified. Enable Attached Pictures: Check the checkbox of Enable Attached Picture if you want to send email with attached alarm images. The interval is the time of two adjacent alarm images. You can also set SMTP port and enable SSL here. Interval: The interval refers to the time between two actions of sending attached pictures. E-mail Test: Sends a test message to verify that the SMTP server can be reached. 6. Click Apply button to save the Email settings. 7. You can click Test button to test whether your Email settings work. The corresponding Attention message box will pop up. Refer to Figure 10. 21. Figure 10. 21 Email Testing Attention 10.2.10 Configuring NAT Purpose: Two ways are provided for port mapping to realize the remote access via the cross-segment network, UPnP™ and 130 User Manual of All-in-One Network Video Recorder manual mapping. UPnPTM Universal Plug and Play (UPnP™) can permit the device seamlessly discover the presence of other network devices on the network and establish functional network services for data sharing, communications, etc. You can use the UPnP™ function to enable the fast connection of the device to the WAN via a router without port mapping. Before you start: If you want to enable the UPnP™ function of the device, you must enable the UPnP™ function of the router to which your device is connected. When the network working mode of the device is set as multi-address, the Default Route of the device should be in the same network segment as that of the LAN IP address of the router. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network 2. Select the NAT tab to enter the port mapping interface. Figure 10. 22 UPnP™ Settings Interface 3. Check checkbox to enable UPnP™. 4. Select the Mapping Type as Manual or Auto in the drop-down list. OPTION 1: Auto If you select Auto, the Port Mapping items are read-only, and the external ports are set by the router automatically. Steps: 1) Select Auto in the drop-down list of Mapping Type. 2) Click Apply button to save the settings. 3) You can click Refresh button to get the latest status of the port mapping. Figure 10. 23 UPnP™ Settings Finished-Auto OPTION 2: Manual If you select Manual as the mapping type, you can edit the external port on your demand by clicking activate the External Port Settings dialog box. Steps: 1) Select Manual in the drop-down list of Mapping Type. 131 to User Manual of All-in-One Network Video Recorder 2) Click to activate the External Port Settings dialog box. Configure the external port No. for server port, http port, RTSP port and https port respectively. You can use the default port No., or change it according to actual requirements. External Port indicates the port No. for port mapping in the router. The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value of the other ports should be between 1 and 65535 and the value must be different from each other. If multiple devices are configured for the UPnP™ settings under the same router, the value of the port No. for each device should be unique. Figure 10. 24 External Port Settings Dialog Box 3) Click Apply button to save the settings. 4) You can click Refresh button to get the latest status of the port mapping. Figure 10. 25 UPnP™ Settings Finished-Manual Manual Mapping If your router does not support the UPnPTM function, perform the following steps to map the port manually in an easy way. Before you start: Make sure the router support the configuration of internal port and external port in the interface of Forwarding. Steps: 1. Enter the Network Settings interface. Menu > Configuration > Network 2. Select the NAT tab to enter the port mapping interface. 3. Leave the Enable UPnP checkbox unchecked. 4. Click to activate the External Port Settings dialog box. Configure the external port No. for server port, http port, RTSP port and https port respectively. 132 User Manual of All-in-One Network Video Recorder The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value of the other ports should be between 1 and 65535 and the value must be different from each other. If multiple devices are configured for the UPnP™ settings under the same router, the value of the port No. for each device should be unique. Figure 10. 26 External Port Settings Dialog Box 5. Click OK to save the setting for the current port and return to the upper-level menu. 6. Click Apply button to save the settings. 7. Enter the virtual server setting page of router; fill in the blank of Internal Source Port with the internal port value, the blank of External Source Port with the external port value, and other required contents. Each item should be corresponding with the device port, including server port, http port, RTSP port and https port. Figure 10. 27 Setting Virtual Server Item The above virtual server setting interface is for reference only, it may be different due to different router manufactures. Please contact the manufacture of router if you have any problems with setting virtual server. 10.3 Checking Network Traffic Purpose: You can check the network traffic to obtain real-time information of NVR such as linking status, MTU, sending/receiving rate, etc. Steps: 1. Enter the Network Traffic interface. Menu > Maintenance > Net Detect 133 User Manual of All-in-One Network Video Recorder Figure 10. 28 Network Traffic Interface 2. You can view the sending rate and receiving rate information on the interface. The traffic data is refreshed every 1 second. 134 User Manual of All-in-One Network Video Recorder 10.4 Configuring Network Detection Purpose: You can obtain network connecting status of NVR through the network detection function, including network delay, packet loss, etc. 10.4.1 Testing Network Delay and Packet Loss Steps: 1. Enter the Network Traffic interface. Menu > Maintenance > Net Detect 2. Click the Network Detection tab to enter the Network Detection menu, as shown in Figure 10. 29. Figure 10. 29 Network Detection Interface 3. Enter the destination address in the text field of Destination Address. 4. Click Test button to start testing network delay and packet loss. The testing result pops up on the window. If the testing is failed, the error message box will pop up as well. Refer to Figure 10. 30. Figure 10. 30 Testing Result of Network Delay and Packet Loss 10.4.2 Exporting Network Packet Purpose: By connecting the NVR to network, the captured network data packet can be exported to USB-flash disk, SATA, DVD-R/W and other local backup devices. Steps: 1. Enter the Network Traffic interface. Menu > Maintenance > Net Detect 2. Click the Network Detection tab to enter the Network Detection interface. 3. Select the backup device from the dropdown list of Device Name, as shown in Figure 10. 31. Click Refresh button if the connected local backup device cannot be displayed. When it fails to detect the backup 135 User Manual of All-in-One Network Video Recorder device, please check whether it is compatible with the NVR. You can format the backup device if the format is incorrect. Figure 10. 31 Export Network Packet 4. Click Export button to start exporting. 5. After the exporting is complete, click OK to finish the packet export, as shown in Figure 10. 32. Figure 10. 32 Packet Export Attention Up to 1M data can be exported each time. 10.4.3 Checking the Network Status Purpose: You can also check the network status and quick set the network parameters in this interface. Step: Click the Status button on the lower- right corner of the page. Figure 10. 33 Network Status Checking 136 User Manual of All-in-One Network Video Recorder If the network is normal the following message box pops out. Figure 10. 34 Network status checking result If the message box pops out with other information instead of this one, you can click Network button to show the quick setting interface of the network parameters. 10.4.4 Checking Network Statistics Purpose: You can check the network status to obtain the real-time information of NVR. Steps: 1. Enter the Network Detection interface. Menu > Maintenance > Net Detect 2. Choose the Network Stat. tab. Figure 10. 35 Network Stat. Interface 3. Check the bandwidth of IP Camera, bandwidth of Remote Live View, bandwidth of Remote Playback, bandwidth of Net Receive Idle and bandwidth of Net Send Idle. 4. You can click Refresh to get the newest status. 137 User Manual of All-in-One Network Video Recorder Chapter 11 HDD Management 138 User Manual of All-in-One Network Video Recorder 11.1 Initializing HDDs Purpose: The hard disk drive (HDD) must be initialized before it can be used with your NVR. A message box pops up when the NVR starts up if there exits any uninitialized HDD. Figure 11. 1 Message Box of Uninitialized HDD Click Yes button to initialize it immediately or you can perform the following steps to initialize the HDD. Steps: 1. Enter the HDD Information interface. Menu > HDD > General Figure 11. 2 HDD Information Interface 2. Select HDD to be initialized. 3. Click the Init button. Figure 11. 3 Confirm Initialization 4. Select the OK button to start initialization. Figure 11. 4 Status changes to Initializing 5. After the HDD has been initialized, the status of the HDD will change from Uninitialized to Normal. 139 User Manual of All-in-One Network Video Recorder Figure 11. 5 HDD Status Changes to Normal Initializing the HDD will erase all data on it. 140 User Manual of All-in-One Network Video Recorder 11.2 Managing Network HDD Purpose: You can add the allocated NAS or disk of IP SAN to NVR, and use it as network HDD. Steps: 1. Enter the HDD Information interface. Menu > HDD > General Figure 11. 6 HDD Information Interface 2. Click the Add button to enter the Add NetHDD interface, as shown in Figure 11. 7. Figure 11. 7 HDD Information Interface 3. Add the allocated NetHDD. 4. Select the type to NAS or IP SAN. 5. Configure the NAS or IP SAN settings. • Add NAS disk: 1) Enter the NetHDD IP address in the text field. 2) Click the Search button to search the available NAS disks. 3) Select the NAS disk from the list shown below. Or you can just manually enter the directory in the text field of NetHDD Directory. 4) Click the OK button to add the configured NAS disk. Up to 8 NAS disks can be added. 141 User Manual of All-in-One Network Video Recorder Figure 11. 8 Add NAS Disk • Add IP SAN: 1) Enter the NetHDD IP address in the text field. 2) Click the Search button to search the available IP SAN disks. 3) Select the IP SAN disk from the list shown below. 4) Click the OK button to add the selected IP SAN disk. Up to 1 IP SAN disk can be added. Figure 11. 9 Add IP SAN Disk 6. After having successfully added the NAS or IP SAN disk, return to the HDD Information menu. The added NetHDD will be displayed in the list. If the added NetHDD is uninitialized, please select it and click the Init button for initialization. Figure 11. 10 Initialize Added NetHDD 142 User Manual of All-in-One Network Video Recorder 11.3 Configuring Quota Mode Purpose: Each camera can be configured with allocated quota for the storage of recorded files. Steps: 1. Enter the Storage Mode interface. Menu > HDD > Advanced 2. Set the Mode to Quota, as shown in Figure 11. 11. The NVR must be rebooted to enable the changes to take effect. Figure 11. 11 Storage Mode Settings Interface 3. Select a camera for which you want to configure quota. 4. Enter the storage capacity in the text fields of Max. Record Capacity (GB), as shown in Figure 11. 12. Figure 11. 12 Configure Record Quota 5. You can copy the quota settings of the current camera to other cameras if required. Click the Copy button to enter the Copy Camera menu, as shown in Figure 11. 13. 143 User Manual of All-in-One Network Video Recorder Figure 11. 13 Copy Settings to Other Camera(s) 6. Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of IP Camera to select all cameras. 7. Click the OK button to finish the Copy settings and back to the Storage Mode interface. 8. Click the Apply button to apply the settings. If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record. 144 User Manual of All-in-One Network Video Recorder 11.4 Checking HDD Status Purpose: You may check the status of the installed HDDs on NVR so as to take immediate check and maintenance in case of HDD failure. Checking HDD Status in HDD Information Interface Steps: 1. Enter the HDD Information interface. Menu > HDD > General 2. Check the status of each HDD which is displayed on the list, as shown in Figure 11. 14. Figure 11. 14 View HDD Status (1) If the status of HDD is Normal, it works normally. If the status is Uninitialized or Abnormal, please initialize the HDD before use. And if the HDD initialization is failed, please replace it with a new one. Checking HDD Status in HDD Information Interface Steps: 1. Enter the System Information interface. Menu > Maintenance > System Info 2. Click the HDD tab to view the status of each HDD displayed on the list, as shown in Figure 11. 15. Figure 11. 15 View HDD Status (2) 145 User Manual of All-in-One Network Video Recorder 11.5 HDD Detection Purpose: The device provides the HDD detection function such as the adopting of the S.M.A.R.T. and the Bad Sector Detection technique. The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for HDD to detect and report on various indicators of reliability in the hopes of anticipating failures. S.M.A.R.T. Settings Steps: 1. Enter the S.M.A.R.T Settings interface. Menu > Maintenance > HDD Detect 2. Select the HDD to view its S.M.A.R.T information list, as shown in Figure 11. 16. Figure 11. 16 S.M.A.R.T Settings Interface The related information of the S.M.A.R.T. is shown on the interface. You can choose the self-test types as Short Test, Expanded Test or the Conveyance Test. Click the start button to start the S.M.A.R.T. HDD self-evaluation. If you want to use the HDD even when the S.M.A.R.T. checking is failed, you can check the checkbox of the Continue to use the disk when self-evaluation is failed item. Bad Sector Detection Steps: 1. Click the Bad Sector Detection tab. 2. Select the HDD No. in the dropdown list you want to configure, and choose All Detection or Key Area Detection as the detection type. 3. Click the Detect button to start the detection. 146 User Manual of All-in-One Network Video Recorder Figure 11. 17 Bad Sector Detection And you can click Error info button to see the detailed damage information. And you can also pause/resume or cancel the detection. 147 User Manual of All-in-One Network Video Recorder 11.6 Configuring HDD Error Alarms Purpose: You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal. Steps: 1. Enter the Exception interface. Menu > Configuration > Exceptions 2. Select the Exception Type to HDD Error from the dropdown list. 3. Click the checkbox(s) below to select the HDD error alarm type (s), as shown in Figure 11. 18. The alarm type can be selected to: Audible Warning, Notify Surveillance Center, Send Email and Trigger Alarm Output. Please refer to Chapter 9.7 Setting Alarm Response Actions. Figure 11. 18 Configure HDD Error Alarm 4. When the Trigger Alarm Output is selected, you can also select the alarm output to be triggered from the list below. 5. Click the Apply button to save the settings 148 User Manual of All-in-One Network Video Recorder Chapter 12 Camera Settings 149 User Manual of All-in-One Network Video Recorder 12.1 Configuring OSD Settings Purpose: You can configure the OSD (On-screen Display) settings for the camera, including date /time, camera name, etc. Steps: 1. Enter the OSD Configuration interface. Menu > Camera > OSD 2. Select the camera to configure OSD settings. 3. Edit the Camera Name in the text field. 4. Configure the Display Name, Display Date and Display Week by clicking the checkbox. 5. Select the Date Format, Time Format and Display Mode. Figure 12. 1 OSD Configuration Interface 6. You can use the mouse to click and drag the text frame on the preview window to adjust the OSD position. 7. Click the Apply button to apply the settings. 150 User Manual of All-in-One Network Video Recorder 12.2 Configuring Privacy Mask Purpose: You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator. The privacy mask can prevent certain surveillance areas to be viewed or recorded. Steps: 1. Enter the Privacy Mask Settings interface. Menu > Camera >Privacy Mask 2. Select the camera to set privacy mask. 3. Click the checkbox of Enable Privacy Mask to enable this feature. Figure 12. 2 Privacy Mask Settings Interface 4. Use the mouse to draw a zone on the window. The zones will be marked with different frame colors. Up to 4 privacy masks zones can be configured and the size of each area can be adjusted. 5. The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear Zone1-4 icons on the right side of the window, or click Clear All to clear all zones. Figure 12. 3 Set Privacy Mask Area 6. Click the Apply button to save the settings. 151 User Manual of All-in-One Network Video Recorder 12.3 Configuring Video Parameters Steps: 1. Enter the Image Settings interface. Menu > Camera >Image Figure 12. 4 Image Settings Interface 2. Select the camera to set image parameters. 3. You can click on the arrow to change the value of each parameter. 4. Click the Apply button to save the settings. 152 User Manual of All-in-One Network Video Recorder Chapter 13 NVR Management Maintenance 153 and User Manual of All-in-One Network Video Recorder 13.1 Viewing System Information Steps: 1. Enter the System Information interface. Menu > Maintenance > System Info 2. You can click the Device Info, Camera, Record, Alarm, Network and HDD tabs to view the system information of the device. Figure 13. 1 Device Information Interface 154 User Manual of All-in-One Network Video Recorder 13.2 Searching & Export Log Files Purpose: The operation, alarm, exception and information of the NVR can be stored in log files, which can be viewed and exported at any time. Steps: 1. Enter the Log Search interface. Menu > Maintenance > Log Information Figure 13. 2 Log Search Interface 2. Set the log search conditions to refine your search, including the Start Time, End Time, Major Type and Minor Type. 3. Click the Search button to start search log files. 4. The matched log files will be displayed on the list shown below. 155 User Manual of All-in-One Network Video Recorder Figure 13. 3 Log Search Results Up to 2000 log files can be displayed each time. 5. You can click the button of each log or double click it to view its detailed information, as shown in Figure 13. 4. And you can also click the button to view the related video files if available. Figure 13. 4 Log Details 6. If you want to export the log files, click the Export button to enter the Export menu. 156 User Manual of All-in-One Network Video Recorder Figure 13. 5 Export Log Files 7. Select the backup device from the dropdown list of Device Name. 8. Click the Export to export the log files to the selected backup device. You can click the New Folder button to create new folder in the backup device, or click the Format button to format the backup device before log export. Please connect the backup device to NVR before operating log export. The log files exported to the backup device are named by exporting time, e.g., 20110514124841logBack.txt. To export all the log files: Steps: 1. Enter the Log Information interface. Menu > Maintenance > Log Information > Log Export 2. Click the Log Export tab. Figure 13. 6 Log Export Interface 3. Check the checkbox of the HDD. 4. Click the Export button to export all the log files stored in the HDD. 157 User Manual of All-in-One Network Video Recorder 13.3 Importing/Exporting IP Camera Info Purpose: The information of added IP camera can be generated into an excel file and exported to the local device for backup, including the IP address, manage port, password of admin, etc.. And the exported file can be edited on your PC, like adding or deleting the content, and copy the setting to other devices by importing the excel file to it. Steps: 1. Enter the camera management interface. Menu > Camera > IP Camera Import/Export 2. Click the IP Camera Import/Export tab, the content of detected plugged external device appears. 3. Click the Export button to export configuration files to the selected local backup device. 4. To import a configuration file, select the file from the selected backup device and click the Import button. After the importing process is completed, you must reboot the NVR. 158 User Manual of All-in-One Network Video Recorder 13.4 Importing/Exporting Configuration Files Purpose: The configuration files of the NVR can be exported to local device for backup; and the configuration files of one NVR can be imported to multiple NVR devices if they are to be configured with the same parameters. Steps: 1. Enter the Import/Export Configuration File interface. Menu > Maintenance > Import/Export Figure 13. 7 Import/Export Config File 2. Click the Export button to export configuration files to the selected local backup device. 3. To import a configuration file, select the file from the selected backup device and click the Import button. After the import process is completed, you must reboot the NVR. After having finished the import of configuration files, the device will reboot automatically. 159 User Manual of All-in-One Network Video Recorder 13.5 Upgrading System Purpose: The firmware on your NVR can be upgraded by local backup device or remote FTP server. 13.5.1 Upgrading by Local Backup Device Steps: 1. Connect your NVR with a local backup device where the update firmware file is located. 2. Enter the Upgrade interface. Menu > Maintenance > Upgrade 3. Click the Local Upgrade tab to enter the local upgrade menu, as shown in Figure 13. 8. Figure 13. 8 Local Upgrade Interface 4. Select the update file from the backup device. 5. Click the Upgrade button to start upgrading. 6. After the upgrading is complete, reboot the NVR to activate the new firmware. 13.5.2 Upgrading by FTP Purpose: Ensure the network connection of the PC (running FTP server) and the device is valid and correct. Run the FTP server on the PC and copy the firmware into the corresponding directory of your PC. Refer to the user manual of the FTP server to set the FTP server on your PC and put the firmware file into the 160 User Manual of All-in-One Network Video Recorder directory as required. Steps: 1. Enter the Upgrade interface. Menu > Maintenance > Upgrade 2. Click the FTP tab to enter the local upgrade interface, as shown in Figure 13. 9. Figure 13. 9 FTP Upgrade Interface 3. Enter the FTP Server Address in the text field. 4. Click the Upgrade button to start upgrading. 5. After the upgrading is complete, reboot the NVR to activate the new firmware. 161 User Manual of All-in-One Network Video Recorder 13.6 Restoring Default Settings Steps: 1. Enter the Default interface. Menu > Maintenance > Default Figure 13. 10 Restore Defaults 2. Select the restoring type from the following three options. Restore Defaults: Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the factory default settings. Factory Defaults: Restore all parameters to the factory default settings. Restore to Inactive: Restore the device to the inactive status. 3. Click the OK button to restore the default settings. The device will reboot automatically after restoring to the default settings. 162 User Manual of All-in-One Network Video Recorder Chapter 14 Others 163 User Manual of All-in-One Network Video Recorder 14.1 Configuring General Settings Purpose: You can configure the BNC output standard, VGA output resolution, mouse pointer speed through the Menu > Configuration > General interface. Steps: 1. Enter the General Settings interface. Menu > Configuration > General 2. Select the General tab. Figure 14. 1 General Settings Interface 3. Configure the following settings: • Language: The default language used is English. • Resolution: Select the resolution for the video output, which must be the same with the resolution of the monitor screen. • • • • • • • Time Zone: Select the time zone. Date Format: Select the date format. System Date: Select the system date. System Time: Select the system time. Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable. Enable Wizard: Enable/disable the Wizard when the device starts up. Enable Password: Enable/disable the use of the login password. 4. Click the Apply button to save the settings. 164 User Manual of All-in-One Network Video Recorder 14.2 Configuring DST Settings Steps: 1. Enter the General Settings interface. Menu > Configuration > General 2. Choose DST Settings tab. Figure 14. 2 DST Settings Interface 3. You can check the checkbox before the Auto DST Adjustment item. Or you can manually check the Enable DST checkbox, and then you choose the date of the DST period. 165 User Manual of All-in-One Network Video Recorder 14.3 Configuring More Settings for Device Parameters Steps: 1. Enter the General Settings interface. Menu > Configuration > General 2. Click the More Settings tab to enter the More Settings interface, as shown in Figure 14. 3. Figure 14. 3 More Settings Interface 3. Configure the following settings: • Device Name: Edit the name of NVR. • Device No.: Edit the serial number of NVR. The Device No. can be set in the range of 1~255, and the default No. is 255. The number is used for the remote and keyboard control. • Auto Logout: Set timeout time for menu inactivity. E.g., when the timeout time is set to 5 Minutes, then the system will exit from the current operation menu to live view screen after 5 minutes of menu inactivity. • Menu Output Mode: You can choose the menu display on different video output. By default, only HDMITM /VGA is selectable. 4. Click the Apply button to save the settings. 166 User Manual of All-in-One Network Video Recorder 14.4 Managing User Accounts Purpose: There is a default account in the NVR: Administrator. The Administrator user name is admin and the password is set when you start the device for the first time. The Administrator has the permission to add and delete user and configure user parameters. 14.4.1 Adding a User Steps: 1. Enter the User Management interface. Menu >Configuration>User Figure 14. 4 User Management Interface 2. Click the Add button to enter the Add User interface. Figure 14. 5 Add User Menu 3. Enter the information for new user, including User Name, Password, Confirm, Level and User’s MAC 167 User Manual of All-in-One Network Video Recorder Address. Password: Set the password for the user account. STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. Level: Set the user level to Operator or Guest. Different user levels have different operating permission. • Operator: The Operator user level has permission of Two-way Audio in Remote Configuration and all operating permission in Camera Configuration by default. • Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the local/remote playback in the Camera Configuration by default. User’s MAC Address: The MAC address of the remote PC which logs onto the NVR. If it is configured and enabled, it only allows the remote user with this MAC address to access the NVR. 4. Click the OK button to save the settings and go back to the User Management interface. The added new user will be displayed on the list, as shown in Figure 14. 6. Figure 14. 6 Added User Listed in User Management Interface 5. Select the user from the list and then click the button to enter the Permission settings interface, as shown in Figure 14. 7. Figure 14. 7 User Permission Settings Interface 168 User Manual of All-in-One Network Video Recorder 6. Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for the user. Local Configuration • Local Log Search: Searching and viewing logs and system information of NVR. • Local Parameters Settings: Configuring parameters, restoring factory default parameters and importing/exporting configuration files. • Local Camera Management: The adding, deleting and editing of IP cameras. • Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD property), upgrading system firmware, clearing I/O alarm output. • Local Shutdown Reboot: Shutting down or rebooting the NVR. Remote Configuration • Remote Log Search: Remotely viewing logs that are saved on the NVR. • Remote Parameters Settings: Remotely configuring parameters, restoring factory default parameters and importing/exporting configuration files. • • • • • Remote Camera Management: Remote adding, deleting and editing of the IP cameras. Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports. Remote Video Output Control: Sending remote button control signal. Two-Way Audio: Realizing two-way radio between the remote client and the NVR. Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote client) and controlling the alarm output. • Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting HDD property), upgrading system firmware, clearing I/O alarm output. • Remote Shutdown/Reboot: Remotely shutting down or rebooting the NVR. Camera Configuration • Remote Live View: Remotely viewing live video of the selected camera (s). • Local Manual Operation: Locally starting/stopping manual recording and alarm output of the selected camera (s). • Remote Manual Operation: Remotely starting/stopping manual recording and alarm output of the selected camera (s). • • • • • Local Playback: Locally playing back recorded files of the selected camera (s). Remote Playback: Remotely playing back recorded files of the selected camera (s). Local PTZ Control: Locally controlling PTZ movement of the selected camera (s). Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s). Local Video Export: Locally exporting recorded files of the selected camera (s). 7. Click the OK button to save the settings and exit interface. Only the admin user account has the permission of restoring factory default parameters. 14.4.2 Deleting a User Steps: 1. Enter the User Management interface. Menu >Configuration>User 2. Select the user to be deleted from the list, as shown in Figure 14. 8. 169 User Manual of All-in-One Network Video Recorder Figure 14. 8 User List 3. Click the icon to delete the selected user account. 14.4.3 Editing a User For the added user accounts, you can edit the parameters. Steps: 1. Enter the User Management interface. Menu >Configuration>User 2. Select the user to be edited from the list, as shown in Figure 14. 8. 3. Click the icon to enter the Edit User interface, as shown in Figure 14. 9. Figure 14. 9 Edit User Interface 4. Edit the corresponding parameters. • Operator and Guest You can edit the user information, including user name, password, permission level and MAC address. Check the checkbox of Change Password if you want to change the password, and input the new password in the text field of Password and Confirm. A strong password is recommended. • Admin You are only allowed to edit the password and MAC address. Check the checkbox of Change Password if you want to change the password, and the input the correct old password, and the new password in the text field of Password and Confirm. 170 User Manual of All-in-One Network Video Recorder STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 5. Click the OK button to save the settings and exit the menu. 6. For the Operator or Guest user account, you can also click the interface to edit the permission. 171 button on the user management User Manual of All-in-One Network Video Recorder Chapter 15 Appendix 172 User Manual of All-in-One Network Video Recorder 15.1 Glossary • Dual Stream: Dual stream is a technology used to record high resolution video locally while transmitting a lower resolution stream over the network. The two streams are generated by the DVR, with the main stream having a maximum resolution of 4CIF and the sub-stream having a maximum resolution of CIF. • HDD: Acronym for Hard Disk Drive. A storage medium which stores digitally encoded data on platters with magnetic surfaces. • DHCP: Dynamic Host Configuration Protocol (DHCP) is a network application protocol used by devices (DHCP clients) to obtain configuration information for operation in an Internet Protocol network. • HTTP: Acronym for Hypertext Transfer Protocol. A protocol to transfer hypertext request and information between servers and browsers over a network • PPPoE: PPPoE, Point-to-Point Protocol over Ethernet, is a network protocol for encapsulating Point-to-Point Protocol (PPP) frames inside Ethernet frames. It is used mainly with ADSL services where individual users connect to the ADSL transceiver (modem) over Ethernet and in plain Metro Ethernet networks. • DDNS: Dynamic DNS is a method, protocol, or network service that provides the capability for a networked device, such as a router or computer system using the Internet Protocol Suite, to notify a domain name server to change, in real time (ad-hoc) the active DNS configuration of its configured hostnames, addresses or other information stored in DNS. • Hybrid DVR: A hybrid DVR is a combination of a DVR and NVR. • NTP: Acronym for Network Time Protocol. A protocol designed to synchronize the clocks of computers over a network. • NTSC: Acronym for National Television System Committee. NTSC is an analog television standard used in such countries as the United States and Japan. Each frame of anNTSC signal contains 525 scan lines at 60Hz. • NVR: Acronym for Network Video Recorder. An NVR can be a PC-based or embedded system used for centralized management and storage for IP cameras, IP Domes and other DVRs. • PAL: Acronym for Phase Alternating Line. PAL is also another video standard used in broadcast televisions systems in large parts of the world. PAL signal contains 625 scan lines at 50Hz. • PTZ: Acronym for Pan, Tilt, Zoom. PTZ cameras are motor driven systems that allow the camera to pan left and right, tilt up and down and zoom in and out. • USB: Acronym for Universal Serial Bus. USB is a plug-and-play serial bus standard to interface devices to a host computer. 173 User Manual of All-in-One Network Video Recorder 15.2 Troubleshooting No image displayed on the monitor after starting up normally. Possible Reasons a) No VGA or HDMITM connections. b) Connection cable is damaged. c) Input mode of the monitor is incorrect. Steps 1. Verify the device is connected with the monitor via HDMITM or VGA cable. If not, please connect the device with the monitor and reboot. 2. Verify the connection cable is good. If there is still no image display on the monitor after rebooting, please check if the connection cable is good, and change a cable to connect again. 3. Verify Input mode of the monitor is correct. Please check the input mode of the monitor matches with the output mode of the device (e.g. if the output mode of NVR is HDMITM output, then the input mode of monitor must be the HDMITM input). And if not, please modify the input mode of monitor. 4. Check if the fault is solved by the step 1 to step 3. If it is solved, finish the process. If not, please contact the engineer from our company to do the further process. There is an audible warning sound “Di-Di-Di-DiDi” after a new bought NVR starts up. Possible Reasons a) No HDD is installed in the device. b) The installed HDD has not been initialized. c) The installed HDD is not compatible with the NVR or is broken-down. Steps 1. Verify at least one HDD is installed in the NVR. 1) If not, please install the compatible HDD. Please refer to the “Quick Operation Guide” for the HDD installation steps. 2) If you don’t want to install a HDD, select “Menu>Configuration > Exceptions”, and uncheck the Audible Warning checkbox of “HDD Error”. 2. Verify the HDD is initialized. 1) Select “Menu>HDD>General”. 2) If the status of the HDD is “Uninitialized”, please check the checkbox of corresponding HDD and click the “Init” button. 3. Verify the HDD is detected or is in good condition. 1) Select “Menu>HDD>General”. 2) If the HDD is not detected or the status is “Abnormal”, please replace the dedicated HDD according to the requirement. 4. Check if the fault is solved by the step 1 to step 3. If it is solved, finish the process. If not, please contact the engineer from our company to do the further process. The status of the added IP camera displays as “Disconnected” when it is connected through Private Protocol. Select “Menu>Camera>Camera>IP Camera” to get the camera status. 174 User Manual of All-in-One Network Video Recorder Possible Reasons a) Network failure, and the NVR and IP camera lost connections. b) The configured parameters are incorrect when adding the IP camera. c) Insufficient bandwidth. Steps 1. Verify the network is connected. 1) Connect the NVR and PC with the RS-232 cable. 2) Open the Super Terminal software, and execute the ping command. Input “ping IP” (e.g. ping 172.6.22.131). Simultaneously press Ctrl and C to exit the ping command. If there exists return information and the time value is little, the network is normal. 2. Verify the configuration parameters are correct. 1) Select “Menu>Camera>Camera>IP Camera”. 2) Verify the following parameters are the same with those of the connected IP devices, including IP address, protocol, management port, user name and password. 3. Verify the whether the bandwidth is enough. 1) Select “Menu >Maintenance > Net Detect > Network Stat.”. 2) Check the usage of the access bandwidth, and see if the total bandwidth has reached its limit. 4. Check if the fault is solved by the step 1 to step 3. If it is solved, finish the process. If not, please contact the engineer from our company to do the further process. The IP camera frequently goes online and offline and the status of it displays as “Disconnected”. Possible Reasons a) The IP camera and the NVR versions are not compatible. b) Unstable power supply of IP camera. c) Unstable network between IP camera and NVR. d) Limited flow by the switch connected with IP camera and NVR. Steps 1. Verify the IP camera and the NVR versions are compatible. 1) Enter the IP camera Management interface “Menu > Camera > Camera>IP Camera”, and view the firmware version of connected IP camera. 2) Enter the System Info interface “Menu>Maintenance>System Info>Device Info”, and view the firmware version of NVR. 2. Verify power supply of IP camera is stable. 1) Verify the power indicator is normal. 2) When the IP camera is offline, please try the ping command on PC to check if the PC connects with the IP camera. 3. Verify the network between IP camera and NVR is stable. 1) When the IP camera is offline, connect PC and NVR with the RS-232 cable. 2) Open the Super Terminal, use the ping command and keep sending large data packages to the connected IP camera, and check if there exists packet loss. Simultaneously press Ctrl and C to exit the ping command. Example: Input ping 172.6.22.131 –l 1472 –f. 4. Verify the switch is not flow control. 175 User Manual of All-in-One Network Video Recorder Check the brand, model of the switch connecting IP camera and NVR, and contact with the manufacturer of the switch to check if it has the function of flow control. If so, please turn it down. 5. Check if the fault is solved by the step 1 to step 4. If it is solved, finish the process. If not, please contact the engineer from our company to do the further process. No monitor connected with the NVR locally and when you manage the IP camera to connect with the device by web browser remotely, of which the status displays as Connected. And then you connect the device with the monitor via VGA or HDMITM interface and reboot the device, there is black screen with the mouse cursor. Connect the NVR with the monitor before startup via VGA or HDMITM interface, and manage the IP camera to connect with the device locally or remotely, the status of IP camera displays as Connect. Possible Reasons: After connecting the IP camera to the NVR, the image is output via the main spot interface by default. Steps: 1. Enable the output channel. 2. Select “Menu > Configuration > Live View > View”, and select video output interface in the drop-down list and configure the window you want to view. The view settings can only be configured by the local operation of NVR. Different camera orders and window-division modes can be set for different output interfaces separately, and digits like “D1”and “D2” stands for the channel number, and “X” means the selected window has no image output. 3. Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from our company to do the further process. Live view stuck when video output locally. Possible Reasons: a) Poor network between NVR and IP camera, and there exists packet loss during the transmission. b) The frame rate has not reached the real-time frame rate. Steps: 1. Verify the network between NVR and IP camera is connected. 1) When image is stuck, connect the RS-232 ports on PC and the rear panel of NVR with the RS-232 cable. 2) Open the Super Terminal, and execute the command of “ping 192.168.0.0 –l 1472 –f” (the IP address may change according to the real condition), and check if there exists packet loss. Simultaneously press Ctrl and C to exit the ping command. 2. Verify the frame rate is real-time frame rate. Select “Menu > Record > Parameters > Record”, and set the Frame rate to Full Frame. 3. Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from our company to do the further process. Live view stuck when video output remotely via the Internet Explorer or platform software. Possible Reasons: a) Poor network between NVR and IP camera, and there exists packet loss during the transmission. b)Poor network between NVR and PC, and there exists packet loss during the transmission. 176 User Manual of All-in-One Network Video Recorder c) The performances of hardware are not good enough, including CPU, memory, etc.. Steps: 1. Verify the network between NVR and IP camera is connected. 1) When image is stuck, connect the RS-232 ports on PC and the rear panel of NVR with the RS-232 cable. 2) Open the Super Terminal, and execute the command of “ping 192.168.0.0 –l 1472 –f” (the IP address may change according to the real condition), and check if there exists packet loss. Simultaneously press Ctrl and C to exit the ping command. 2. Verify the network between NVR and PC is connected. 1) Open the cmd window in the Start menu, or you can press “windows+R” shortcut key to open it. 2) Use the ping command to send large packet to the NVR, execute the command of “ping 192.168.0.0 –l 1472 –f” (the IP address may change according to the real condition), and check if there exists packet loss. Simultaneously press Ctrl and C to exit the ping command. 3. Verify the hardware of the PC is good enough. Simultaneously press Ctrl, Alt and Delete to enter the windows task management interface, as shown in the following figure. Windows task management interface Select the “Performance” tab; check the status of the CPU and Memory. If the resource is not enough, please end some unnecessary processes. 4. Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from our company to do the further process. When using the NVR to get the live view audio, there is no sound or there is too much noise, or the volume is too low. Possible Reasons: a) Cable between the pickup and IP camera is not connected well; impedance mismatches or incompatible. b) The stream type is not set as “Video & Audio”. 177 User Manual of All-in-One Network Video Recorder c) The encoding standard is not supported with NVR. Steps: 1. Verify the cable between the pickup and IP camera is connected well; impedance matches and compatible. Log in the IP camera directly, and turn the audio on, check if the sound is normal. If not, please contact the manufacturer of the IP camera. 2. Verify the setting parameters are correct. Select “Menu > Record > Parameters > Record”, and set the Stream Type as “Audio & Video”. 3. Verify the audio encoding standard of the IP camera is supported by the NVR. NVR supports G722.1 and G711 standards, and if the encoding parameter of the input audio is not one of the previous two standards, you can log in the IP camera to configure it to the supported standard. 4. Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from our company to do the further process. The image gets stuck when NVR is playing back by single or multi-channel. Possible Reasons: a) Poor network between NVR and IP camera, and there exists packet loss during the transmission. b) The frame rate is not the real-time frame rate. c) The NVR supports up to 16-channel synchronize playback at the resolution of 4CIF, if you want a 16-channel synchronize playback at the resolution of 720p, the frame extracting may occur, which leads to a slight stuck. Steps: 1. Verify the network between NVR and IP camera is connected. 1) When image is stuck, connect the RS-232 ports on PC and the rear panel of NVR with the RS-232 cable. 2) Open the Super Terminal, and execute the command of “ping 192.168.0.0 –l 1472 –f” (the IP address may change according to the real condition), and check if there exists packet loss. Simultaneously press the Ctrl and C to exit the ping command. 2. Verify the frame rate is real-time frame rate. Select “Menu > Record > Parameters > Record”, and set the Frame Rate to “Full Frame”. 3. Verify the hardware can afford the playback. Reduce the channel number of playback. Select “Menu > Record > Encoding > Record”, and set the resolution and bitrate to a lower level. 4. Reduce the number of local playback channel. Select “Menu > Playback”, and uncheck the checkbox of unnecessary channels. 5. Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from our company to do the further process. No record file found in the NVR local HDD, and prompt “No record file found”. Possible Reasons: a) The time setting of system is incorrect. b) The search condition is incorrect. c) The HDD is error or not detected. 178 User Manual of All-in-One Network Video Recorder Steps: 1. Verify the system time setting is correct. Select “Menu > Configuration > General > General”, and verify the “Device Time” is correct. 2. Verify the search condition is correct. Select “Playback”, and verify the channel and time are correct. 3. Verify the HDD status is normal. Select “Menu > HDD > General” to view the HDD status, and verify the HDD is detected and can be read and written normally. 4. Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from our company to do the further process. 179 User Manual of All-in-One Network Video Recorder 15.3 Summary of Changes Version 3.0.13 Added 1. Support configuring the displayer parameters and input source. (Chapter 2.3) 2. Support importing and previewing advertising files. (Chapter 4) 3. Set the strong password to activate the device is needed for the first-time startup (Chapter 2.2) Update 1. Optimize the steps of login and logout. (Chapter 2.4) 2. Optimize the adding of IP camera. (Chapter 2.6) 3. Three methods are selectable for restoring to the default settings. (Chapter 12.6) 4. Optimize the user account management. (Chapter 14.4) Deleted 1. The RS-232 function is deleted. 2. The HDD property does not support the group. Version 3.0.6 Updated 1. Optimize the PTZ control panels and operations. (Chapter 4) 2. Change the ezviz Cloud to EZVIZ Cloud P2P. (Chapter 9.2.2) 3. Add the models of DS-7100NI series, DS-7600NI-SE series and DS-7600NI-V(P) series NVR. Version 3.0.4 Added 1. Connectable to smart IP cameras, and VCA alarm detection and recording are supported. (Chapter 5.2, Chapter 5.5 and Chapter 8.5) 2. Support video searching, playing back and backing up by VCA events. (Chapter 6.1.3 and Chapter 7.1.3) 3. Support smart playback by VCA rules. (Chapter 6.1.5) 4. Support P2P protocol and access by ezviz. (Chapter 9.2.2) Deleted Combine the smart search function with the smart playback function, and the smart search section is deleted. (Chapter 6.2.2 Smart Search) 180 User Manual of All-in-One Network Video Recorder 15.4 List of Compatible IP Cameras List of Hikvision IP Cameras For the list, our company holds right to interpret. Max. Type Model Version Sub-stream Audio Resolution DS-2CD2810F v5.2.6 build 141218 1280×1024 √ √ DS-2CD2810FWD v5.2.6 build 141218 1280×960 √ √ DS-2CD4012F-(A)(P)(W) v5.2.6 build 141218 1280×1024 √ √ DS-2CD4012FWD-(A)(P)(W) v5.2.6 build 141218 1280×960 √ √ DS-2CD4010F v5.2.6 build 141218 1280×1024 √ √ DS-2CD4010FWD v5.2.6 build 141218 1280×960 √ √ DS-2CD4010F-D v5.2.6 build 141218 1280×960 √ √ DS-2CD2012-I v5.2.8 build141231 1280×960 √ × DS-2CD2012F-I(W) v5.2.8 build141231 1280×960 √ × DS-2CD2010-I v5.2.6 build 141218 1280×960 √ × DS-2CD2010F-I(W) v5.2.6 build 141218 1280×960 √ × DS-2CD2014WD-I v5.2.6 build 141218 1280×720 √ × DS-2CD2212(D)-I3 v5.2.8 build141231 1280×960 √ × DS-2CD2210(D)-I3 v5.2.6 build 141218 1280×960 √ × DS-2CD2212(D)-I5 v5.2.8 build141231 1280×960 √ × DS-2CD2210(D)-I5 v5.2.6 build 141218 1280×960 √ × DS-2CD2610F-I(S) v5.2.6 build 141218 1280×960 √ √ DS-2CD2610FWD-I(S) v5.2.6 build 141218 1280×960 √ √ DS-2CD2A10F-I(S) v5.2.6 build 141218 1280×960 √ √ DS-2CD2T10(D)-I3/I5/I8 v5.2.6 build 141218 1280×960 √ × DS-2CD2T10FD-I3/I5/I8/R v5.2.6 build 141218 1280×960 √ × DS-2CD2T12-I3/I5/I8 v5.2.8 build141231 1280×960 √ × DS-2CD4210F-I(S) v5.2.6 build 141218 1280×1024 √ √ DS-2CD4212F-I(Z)(H)(S) v5.2.6 build 141218 1280×1024 √ √ DS-2CD4210FWD-I(S) v5.2.6 build 141218 1280×960 √ √ DS-2CD4212FWD-I(Z)(H)(S) v5.2.6 build 141218 1280×960 √ √ DS-2CD4612FWD-IZ(H)(S) v5.2.6 build 141218 1280×960 √ √ DS-2CD4A10F-IZ(S) v5.2.6 build 141218 1280×1024 √ √ DS-2CD4A10FWD-IZ(S) v5.2.6 build 141218 1280×960 √ √ DS-2CD4810F-IZ(H)(S) v5.2.6 build 141218 1280×1024 √ √ DS-2CD4810FWD-IZ(H)(S) v5.2.6 build 141218 1280×960 √ √ HD Network Camera 181 User Manual of All-in-One Network Video Recorder Max. Type Model Version Sub-stream Audio Resolution DS-2CD2110(D)-(I) v5.2.6 build 141218 1280×960 √ × DS-2CD2110F(D)-I(W)(S) v5.2.6 build 141218 1280×960 √ √ DS-2CD2112(D)-(I) v5.2.8 build141231 1280×960 √ × DS-2CD2112F(D)-I(W)(S) v5.2.6 build 141218 1280×960 √ √ DS-2CD2114WD-I v5.2.6 build 141218 1280×720 √ × DS-2CD2312(D)-I v5.2.8 build141231 1280×960 √ × DS-2CD2310(D)-I v5.2.6 build 141218 1280×960 √ × DS-2CD2410FD-I(W) v5.2.6 build 141218 1280×720 √ √ DS-2CD2412F-I(W) v5.2.8 build141231 1280×960 √ √ DS-2CD2510F v5.2.6 build 141218 1280×960 √ × DS-2CD2512F-I(W)(S) v5.2.8 build141231 1280×960 √ √ DS-2CD2710F-I(S) v5.2.6 build 141218 1280×960 √ √ DS-2CD2710FWD-I(S) v5.2.6 build 141218 1280×960 √ √ DS-2CD2712F-I(S) v5.2.8 build141231 1280×960 √ √ DS-2CD2C10F-IW v5.2.6 build 141218 1280×720 √ √ DS-2CD2E10F-(W) v5.2.6 build 141218 1280×960 √ × DS-2CD2Q10FD-IW v5.2.6 build 141218 1280×720 √ √ DS-2CD4110F-ID v5.2.6 build 141218 1280×960 √ √ DS-2CD4110F-(I)(Z) v5.2.6 build 141218 1280×1024 √ √ DS-2CD4110FWD-(I)(Z) v5.2.6 build 141218 1280×960 √ √ DS-2CD4112F-(I)(Z) v5.2.6 build 141218 1280×1024 √ √ DS-2CD4112FWD-(I)(Z) v5.2.6 build 141218 1280×960 √ √ DS-2CD4312F-(I)(Z)(H)(S)(PT) v5.2.6 build 141218 1280×1024 √ √ DS-2CD4312FWD-(I)(Z)(H)(S)(PT) v5.2.6 build 141218 1280×960 √ √ DS-2CD4026EFWD v5.2.6 build 141218 1920×1080 √ √ DS-2CD2820F v5.2.6 build 141218 1920×1080 √ √ DS-2CD2820FWD v5.2.6 build 141218 1920×1080 √ √ DS-2CD4026FWD-(A)(P) v5.2.6 build 141218 1920×1080 √ √ DS-2CD4025FWD-(A)(P) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4020F v5.2.6 build 141218 1920×1080 √ √ DS-2CD4020FWD v5.2.6 build 141218 1920×1080 √ √ DS-2CD4024F-(A)(P)(W) v5.2.6 build 141218 1920×1080 √ √ DS-2CD4024FWD-(A)(P) v5.2.6 build 141218 1920×1080 √ √ DS-2CD2020-I v5.2.6 build 141218 1920×1080 √ × DS-2CD2020F-I(W) v5.2.6 build 141218 1920×1080 √ × DS-2CD2220(D)-I3 v5.2.6 build 141218 1920×1080 √ × DS-2CD2220(D)-I5 v5.2.6 build 141218 1920×1080 √ × DS-2CD2620F-I(S) v5.2.6 build 141218 1920×1080 √ √ DS-2CD2620FWD-I(S) v5.2.6 build 141218 1920×1080 √ √ DS-2CD2A20F-I(S) v5.2.6 build 141218 1920×1080 √ √ 182 User Manual of All-in-One Network Video Recorder Max. Type Model Version Sub-stream Audio Resolution DS-2CD2T20(D)-I3/I5/I8 v5.2.6 build 141218 1920×1080 √ × DS-2CD4220F-I(S) v5.2.6 build 141218 1920×1080 √ √ DS-2CD4220FWD-I(S) v5.2.6 build 141218 1920×1080 √ √ DS-2CD4224FWD-I(Z)(S) v5.2.6 build 141218 1920×1080 √ √ DS-2CD4224F-I(Z)(H)(S) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4624FWD-IZ(H)(S) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4625FWD-IZ(H)(S) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4824FWD-IZ(H)(S) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4825FWD-IZ(H)(S) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4826FWD-IZ(H)(S) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4A20F-IZ(S) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4A20FWD-IZ(S) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4A25FWD-IZ(H)(S) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4A26FWD-IZ(H)(S) V5.2.6 build 141218 1920×1080 √ √ DS-2CD2120(D)-I V5.2.6 build 141218 1920×1080 √ × DS-2CD2120F(D)-I(W)(S) V5.2.6 build 141218 1920×1080 √ √ DS-2CD2320(D)-I v5.2.6 build 141218 1920×1080 √ × DS-2CD2420FD-I(W) V5.2.6 build 141218 1920×1080 √ √ DS-2CD2520F V5.2.6 build 141218 1920×1080 √ × DS-2CD2720F-I(S) v5.2.6 build 141218 1920×1080 √ √ DS-2CD2720FWD-I(S) V5.2.6 build 141218 1920×1080 √ √ DS-2CD2E20F-(W) V5.2.6 build 141218 1920×1080 √ × DS-2CD4120F-(I)(Z) v5.2.6 build 141218 1920×1080 √ √ DS-2CD4120FWD-(I)(Z) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4124F-(I)(Z) v5.2.6 build 141218 1920×1080 √ √ DS-2CD4124FWD-(I)(Z) v5.2.6 build 141218 1920×1080 √ √ DS-2CD4125FWD-(I)(Z) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4324F-(I)(Z)(H)(S)(PT) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4324FWD-(I)(Z)(H)(S) v5.2.6 build 141218 1920×1080 √ √ DS-2CD4524FWD-I(Z)(H) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4525FWD-I(Z)(H) V5.2.6 build 141218 1920×1080 √ √ DS-2CD4032FWD-(A)(P)(W) v5.2.6 build 141218 2048×1536 √ √ DS-2CD4035F-(A)(P) V5.2.6 build 141218 2048×1536 √ √ DS-2CD2032-I v5.2.8 build141231 2048×1536 √ × DS-2CD2032F-I(W) v5.2.8 build141231 2048×1536 √ × DS-2CD2232(D)-I3 v5.2.8 build141231 2048×1536 √ × DS-2CD2232(D)-I5 v5.2.8 build141231 2048×1536 √ × DS-2CD2632F-I(S) v5.2.8 build141231 2048×1536 √ √ DS-2CD2T32-I3/I5/I8 v5.2.8 build141231 2048×1536 √ × DS-2CD4232FWD-I(Z)(H)(S) V5.2.6 build 141218 2048×1536 √ √ 183 User Manual of All-in-One Network Video Recorder Max. Type Model Version Sub-stream Audio Resolution DS-2CD2132(D)-(I) v5.2.8 build141231 2048×1536 √ × DS-2CD2132F(D)-I(W)(S) v5.2.8 build141231 2048×1536 √ √ DS-2CD2332(D)-I v5.2.8 build141231 2048×1536 √ × DS-2CD2432F-I(W) v5.2.8 build141231 2048×1536 √ √ DS-2CD2532F-I(W)(S) v5.2.8 build141231 2048×1536 √ √ DS-2CD2732F-I(S) v5.2.8 build141231 2048×1536 √ √ DS-2CD4132FWD-(I)(Z) V5.2.6 build 141218 2048×1536 √ √ DS-2CD4135F-(I)(Z) V5.2.6 build 141218 2048×1536 √ √ DS-2CD4332FWD-(I)(Z)(H)(S)(PT) V5.2.6 build 141218 2048×1536 √ √ DS-2ZCN2006 V5.2.7 build 141107 1280×960 √ √ DS-2ZCN3006(B) V5.2.7 build 141107 1280×960 √ √ DS-2ZCN2007 V5.2.7 build 141107 1920×1080 √ √ DS-2ZCN3007(B) V5.2.7 build 141107 1920×1080 √ √ DS-2DE4220 Series V5.2.7 build 141125 1920×1080 √ √ DS-2DE4582 Series V5.2.7 build 141125 1920×1080 √ √ HD Mini DS-2DE4182 Series V5.2.7 build 141125 1920×1080 √ √ Speed Dome DS-2DE4120 Series V5.2.7 build 141125 1280×720 √ √ DS-2DE4572 Series V5.2.7 build 141125 1280×720 √ √ DS-2DE4172 Series V5.2.7 build 141125 1280×720 √ √ DS-2DE7186 Series V5.2.7 build 141125 1920×1080 √ √ DS-2DE7184 Series V5.2.7 build 141125 1920×1080 √ √ DS-2DE5186 Series V5.2.7 build 141125 1920×1080 √ √ DS-2DE5184 Series V5.2.7 build 141125 1920×1080 √ √ DS-2DE7176 Series V5.2.7 build 141125 1280×720 √ √ DS-2DE7174 Series V5.2.7 build 141125 1280×720 √ √ DS-2DE5176 Series V5.2.7 build 141125 1280×720 √ √ DS-2DE5174 Series V5.2.7 build 141125 1280×720 √ √ DS-2DF7296 Series V5.2.8 build 141222 2048×1536 √ √ DS-2DF7294 Series V5.2.8 build 141222 2048×1536 √ √ DS-2DF5296 Series V5.2.8 build 141222 2048×1536 √ √ DS-2DF5294 Series V5.2.8 build 141222 2048×1536 √ √ DS-2DF7286 Series V5.2.8 build 141222 1920×1080 √ √ DS-2DF5286 Series V5.2.8 build 141222 1920×1080 √ √ DS-2DF7285 Series V5.2.8 build 141222 1920×1080 √ √ DS-2DF5285 Series V5.2.8 build 141222 1920×1080 √ √ DS-2DF7284 Series V5.2.8 build 141222 1920×1080 √ √ DS-2DF5284 Series V5.2.8 build 141222 1920×1080 √ √ DS-2DF7283 Series V5.2.8 build 141222 1920×1080 √ √ DS-2DF5283 Series V5.2.8 build 141222 1920×1080 √ √ DS-2DM7230I Series V5.2.7 build 141112 1920×1080 √ √ Zoom Camera HD Network Speed Dome 184 User Manual of All-in-One Network Video Recorder Max. Type Model Version Sub-stream Audio Resolution DS-2DM7220I Series V5.2.7 build 141112 1920×1080 √ √ DS-2DF7276 Series V5.2.8 build 141222 1280×720 √ √ DS-2DF5276 Series V5.2.8 build 141222 1280×720 √ √ DS-2DF7274 Series V5.2.8 build 141222 1280×720 √ √ DS-2DF5274 Series V5.2.8 build 141222 1280×720 √ √ DS-2DF727A Series V5.2.8 build 141222 1280×720 √ √ DS-2DF527A Series V5.2.8 build 141222 1280×720 √ √ DS-2DF7276C Series V5.2.8 build 141222 1280×720 √ √ DS-2DF5276C Series V5.2.8 build 141222 1280×720 √ √ DS-2DF7274C Series V5.2.8 build 141222 1280×720 √ √ DS-2DF5274C Series V5.2.8 build 141222 1280×720 √ √ DS-2DM7130I Series V5.2.7 build 141112 1280×720 √ √ DS-2DM7120I Series V5.2.7 build 141112 1280×720 √ √ 185 User Manual of All-in-One Network Video Recorder List of Third-party IP Cameras ONVIF compatibility refers to the camera can be supported both when it uses the ONVIF protocol and its private protocols. Only ONVIF is supported refers to the camera can only be supported when it uses the ONVIF protocol. Only AXIS is supported refers to the function can only be supported when it uses the AXIS protocol. IP Camera Max. Manufacturer or Model Version Sub-stream Audio Resolution Protocol ACTI TCM4301-10D-X-00083 A1D-310-V4.12.09-AC 1280×1024 × √ TCM5311-11D-X-00023 A1D-310-V4.12.09-AC 1280×960 × √ TCM3401-09L-X-00227 A1D-220-V3.13.16-AC 1280×1024 × × AV8185DN 65172 1600×1200 × × AV1305M 65175 1280×1024 √ × AV2155 65143 1600×1200 √ × AV2815 65220 1920×1080 √ × AV3105M 65175 1920×1080 √ × AV5105 65175 1920×1080 √ × M1114 5.09.1 1024×640 √ × 5.21 704×576 ARECONT √(Only AXIS is M3011(ONVIF compatibility) × supported) M3014(ONVIF 5.21.1 1280×800 √ 5.11.2 768×576 √ × compatibility) P3301(ONVIF compatibility) AXIS √(Only AXIS is supported) P3304(ONVIF 5.20 1440×900 √ compatibility) √(Only AXIS is supported) P3343(ONVIF 5.20.1 800×600 √ compatibility) √(Only AXIS is supported) P3344(ONVIF 5.20.1 1440×900 √ compatibility) √(Only AXIS is supported) P5532 5.15 720×576 √ × Q7404 5.02 720×576 √ √ AutoDome Jr 800HD 39500450 1920×1080 × √ NBC 265 P 07500453 1280×720 × √ Dinion NBN-921-P 10500453 1280×720 × √ V3.1.0.8 1280×1024 × √ V3.2.1.3 1920×1080 × √ Bosch (ONVIF compatibility) FB-130Np (ONVIF Brickcom compatibility) CB-500Ap (ONVIF 186 User Manual of All-in-One Network Video Recorder IP Camera Max. Manufacturer or Model Version Sub-stream Audio Resolution Protocol compatibility) Canon HUNT Panasonic WFB-100Ap V3.1.0.9 1280×800 × √ VB-M400 Ver.+1.0.0 1280×960 × √ VB-M6000D Ver.+1.0.0 1280×960 × × VB-M7000F Ver.+1.0.0 1280×960 × √ HLC_79AD V1.0.40 1600×1200 √ × WV-SW152(ONVIF Application:1.66 800×600 √ × compatibility) Image data:1.05 WV-SC386(ONVIF Application:1.66 1280×960 √ √ compatibility) Image data:1.05 WV-SW155(ONVIF Application:1.66 1280×960 √ × compatibility) Image data:1.05 WV-SW316(ONVIF Application:1.66 1280×960 √ √ compatibility) Image data:2.03 WV-SP105(ONVIF Application:1.66 1280×960 √ × compatibility) Image data:1.03 WV-SF132(ONVIF Application:1.66 640×360 √ × compatibility) Image data:1.03 WV-SP102(ONVIF Application:1.66 640×480 √ × compatibility) Image data:1.03 WV-SP509(ONVIF Application:1.30 1280×960 √ √ compatibility) Image data:2.21 WV-SW559(ONVIF Application:1.30 1920×1080 √ √ compatibility) Image data:2.21 WV-SW558(ONVIF Application:1.30 1920×1080 √ × compatibility) Image data:2.21 WV-SW355(ONVIF Application:1.66 1280×960 √ √ compatibility) Image data:1.04 WV-SW352(ONVIF Application:1.66 800×600 √ √ compatibility) Image data:1.04 WV-SF342(ONVIF Application:1.66 800×600 √ √ compatibility) Image data:1.06 WV-SF332(ONVIF Application:1.66 800×600 √ √ compatibility) Image data:1.06 WV-SF346(ONVIF Application:1.66 1280×960 √ √ compatibility) Image data:1.06 1280×960 √ √ 1280×960 √ √ 1280×960 √ × 1920×1080 √ × WV-SP306H Application:1.34 Image data:1.06 WV-SP336H Application:1.06 Image data:1.06 D5118 1.8.2-201203272.9310-A1.7852 PELCO IXE20DN-AAXVUU2 1.8.2-201203272.9081-A1.7852 187 User Manual of All-in-One Network Video Recorder IP Camera Max. Manufacturer or Model Version Sub-stream Audio √ × Resolution Protocol IX30DN-ACFZHB3 1.8.2-201203272.9080-A1.7852 SAMSUNG 2048×1536 √(Only ONVIF SNB-5080P V3.10_130416 1280×1024 SANYO √ is supported) (ONVIF compatibility) VCC-HD2300P 2.03-02(110318-00) 1920×1080 × × VCC-HD2500P 2.02-02(110208-00) 1920×1080 × √ VCC-HD4600P 2.03-02(110315-00) 1920×1080 × √ SNC-CH220 1.50.00 1920×1080 × × 1.73.00 1280×720 √ √ 1.53.00 1920×1080 √ √ 1.50.00 2048×1536 × × 0203a 640×480 × × 0107a 1280×800 × × 0104a 1600×1200 × √ 0102a 640×480 × × 0105b 1280×800 × × D5110 MG.1.6.03P8 1280×1024 √ × F3106 M2.1.6.03P8 1280×1024 √ √ F3110 M2.1.6.01 1280×720 √ √ F3206 MG.1.6.02c045 1920×1080 √ √ F531E LM.1.6.18P10 640×480 √ √ SNC-RH124(ONVIF compatibility) SONY SNC-EP580(ONVIF compatibility) SNC-DH220T(Only ONVIF is supported) IP7133 FD8134(ONVIF compatibility) IP8161(ONVIF Vivotek compatibility) IP8331(ONVIF compatibility) IP8332(ONVIF compatibility) ZAVIO 0300131050424 188 User Manual of All-in-One Network Video Recorder 189
advertisement
Key Features
- Connectable to network cameras, network dome and encoders.
- Connectable to third-party network cameras.
- Connectable to smart IP cameras.
- Each channel supports dual-stream.
- Simultaneous HDMITM and VGA outputs.
Frequently Answers and Questions
How many network cameras can be connected?
Up to 8 network cameras can be connected.
What is the maximum resolution of the HDMITM and VGA outputs?
HDMITM and VGA outputs at up to 1920×1080 resolution.
How many recording time periods can be configured?
8 recording time periods with separated recording types each day.