PCM-3353 A2 PC/104+ SBC w/AMD LX800/LX600, VGA, LCD, LAN

PCM-3353 A2 PC/104+ SBC w/AMD LX800/LX600, VGA, LCD, LAN
PCM-3353 A2 PC/104+ SBC w/AMD LX800/LX600,
VGA, LCD, LAN, USB 2.0 and CF
Startup Manual
Specifications
Packing List
Before you begin installing your card, please make sure that
the following items have been shipped:
1.
1 x PCM-3353 SBC
2.
1 x Power cable
3.
1 x COM cable����������������
(p/n:�����������
1703040157)
4.
1 x Audio cable
(p/n:1700000918)
5.
1 x Four COM cable
(p/n:1701400181)
6.
1 x Keyboard/Mouse cable
(p/n:1703060053)
7.
1 x Y cable (for KB/MS extention)(p/n:1700060202)
8.
1 x Ethernet RJ-45 Conn.
conversion cable�����������������
(p/n:1701100202)
9.
(p/n:1700003491)
1 x LPT port cable
(p/n:1700260250)
10. 1 x IDE cable
(p/n:1701440350)
11. 1 x VGA cable
(p/n:1700000898)
12. 2 x USB cable (bracket type
with two USB ports) (p/n:1703100121)
13. 1 x Startup manual
14. 1 x CD-ROM (Manual, Driver, Utility)
If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
Note 1: For detailed contents of PCM-3353, please refer
to information on the enclosed CD-ROM (in PDF
format).
Note 2: Acrobat Reader is required to view any PDF
file.Acrobat Reader can be downloaded at:
www.adobe.com/Products/acrobat/readstep2.
html (Acrobat is a trademark of Adobe)
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://service.advantech.com.tw/suppot/
This manual is for the PCM-3353 Series Rev. A2
Part No. 2006335302
Print in China
Standard SBC Functions
• CPU: AMD Geode® LX800/LX600 processor, up to 500
MHz
• System memory: 1 x 200 pin SODIMM socket, support
Double Data Rate SDRAM, accepts 128MB to 1GB, accepts 128/256/512/1024MB DDR333 SDRAM
• 2nd cache memory: 128 KB on the processor
• System chipset: AMD Geode LX800/LX600
• BIOS: Award 4Mbit Flash BIOS
• Watchdog timer: 255 levels timer interval
• Expansion Interface: PC/104+
• Battery: Lithium 3 V / 196 mAH
• Enhanced IDE interface: One channels supports up
to two EIDE devices. BIOS auto-detect, PIO Mode 3 or
Mode 4, supports UDMA 33 mode
• Serial ports: Four serial RS-232 ports in one pinheader
40 pin connector (CN30: COM1/2/3/4). RS-422 and RS485 in one pinheader and can be configured via CN39
connector
• Parallel port: One parallel port, supports SPP/EPP/ECP
mode
• Keyboard/mouse connector: Supports one standard
PC/AT keyboard and a PS/2 mouse
• Audio: Supports AC97 Audio stereo sound
• USB: Four USB 2.0 compliant universal serial bus ports
• GPIO: 8 bit general purpose Input/Output
VGA/LVDS Interface
• Memory size: Optimized Shared Memory Architecture,
supports up to 64MB frame buffer using system memory
• Resolution:
- CRT resolution: up to 1600 x 1200 x 16 bpp at 100 Hz
and up to 1024 x 768 x 32 bpp at 60 Hz for TFT LCD
- LCD Interface: Supports up to 24-bit TFT LCD (TTL
signal)
- LVDS Interface: Supports 18 bit LVDS interface (support
24-bit JEIDA LVDS)
• Dual simultaneous display: CRT+LCD, CRT+LVDS
Ethernet Interface
• Chipset supports: 1/10/100 Mbps - Intel 82541PI
• Ethernet interface: IEEE 802.3u (100 BASE-T)
• Connector: One internal box headers
Audio Function
• Audio controller: Realtek ALC203 chipset, supports
AC97 3D Audio stereo sound
• Audio interface: Microphone in, Line in, Line out
3rd Edition,
August 2010
PCM-3353 Startup Manual Specifications
Mechanical and Enviromental
Jumpers and Connectors
CN35
AUDIO-OUT / CN34 AUDIO-IN
CN36
GPIO1
CN37
GPIO2
CN38
Power Input
CN40
DDR RAM Socket
CN41
CF Socket
CN42
LVDS LCD I/F
CN43
Inverter power (LVDS)
J3
Clear CMOS
The board has a number of jumpers that allow you to configure your system to suit your application. The table below
lists the function of each of the jumpers an connectors.
Setting
Function
(1-2) *
BAT (default)
Jumpers and connectors
(2-3)
• Dimensions (L x W): 96 x 115 mm (3.77”x 4.05”)
Mechanical Drawing (dxf file) is available.
• Power Supply Type: AT
• Power Requirement: +5 V ± 5%, +12 V ± 5% (Optional),
(5 V only, 12 V optional for PC104 add on card & LCD
inverter)
• Power Consumption: (Geode LX800, 256 MB DDR333)
Max: +5 [email protected] 1.51A, +12 [email protected] 0.1 A
Typical: +5 [email protected] 1.35 A, +12 [email protected] 0.1 A
• Operating temperature: 0 ~ 60° C (32 ~ 140° F)
• Weight: 0.85 kg (reference weight of total package)
Jumpers and Connectors
Clear CMOS
1
Jumpers
Label
Function
J3
Clear CMOS
J5
PCI VI/O Power Selector
J6
LVDS Power Selector
CN39
COM2 Setting
SW1
CF Master/Slave Selector
Connectors
Label
Function
CN4
TFT LCD I/F
CN5
Inverter Power
CN6
SMBus
CN11
IDE
CN15
USB1/2 / CN17 USB 3/4
2
1
3
CN39
COM2 Setting
Setting
Function
(1-2) *
RS232
(3-4)
RS485
(5-6)
RS422
J5
PCI VI/O POWER
Setting
Function
(1-2)
With +5 V
(2-3) *
2
3
With +3.3 V
1
2
1
3
2
J6
LVDS Power Selector
Part Number
1653003260
Footprint
HD_3x2P_79
3
CN18
KB/MS
CN19
Print Port
CN20
RS422/485
Description
PIN HEADER 3*2P 180D(M) 2.0mm
SMD SOUARE PIN
CN23
SA -5 V & -12 V Input
(1-3) *
+3.3 V
CN26
LAN
(3-4)
+12 V
CN27
CRT
(3-5)
+5 V
CN30
COM1/2/3/4
CN32
AT Power / Reset / Buzzer pin header
CN33
Battery connector
PCM-3353 Startup Manual
CN33 J3
J5
J2 CN38
CN26
CN5
CN43
CN42
J6
CN1
CN4
CN15
CN11
CN19
CN17
CN30
SW1
CN32
CN39
CN23
CN34
CN37 CN36
CN6
CN20
CN18
Figure 1: PCM-3353 Mechanical Drawing (Component Side)
Figure 2: PCM-3353 Location Connectors (Solder Side)
PCM-3353 Startup Manual FF����������
Figure 2: �����������������������������
PCM-3353 Location Connectors ��������������
(Solder Side)
Figure 3: PCM-3353 Mechnanical Drawing (Component Side)
FFFigure 2: PCM-3353 Location Connectors (Solder Side)
Figure 3: PCM-3353 Mechnanical Drawing (Solder Side)
PCM-3353 Startup Manual
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement