HDMI to 3G/HD/SD-SDI CONVERTER

AT-HD-3GSDI

Toll free: 1-877-536-3976

Local: 1-408-962-0515

User Manual

www.atlona.com

TABLE OF CONTENTS

5. Supported Resolutions 4

6. 4

6.1. Front Panel

6.2. Rear Panel

4

4

10. Safety Information

12. Atlona Product Registration

6

8

Toll free: 1-877-536-3976

Local: 1-408-962-0515

1 www.atlona.com

INTRODUCTION

The AT-HD-3GSDI provides a professional way to convert HDMI to 3G/HD/SD SDI in real time. The conversion between SDI and HDMI is pure digital and guarantees no loss transformation for both audio and video. Plus, with up to 8 channels audio support, 7.1 channel or 5.1 channel audio becomes available. The AT-HD-3GSDI also provides 2 low jitter SDI outputs for daisy chain or multiple monitors. With the use of AT-HD-3GSDI, the most popular uncompressed video interface in the consumer world is readily available for professional SDI equipments!

FEATURES

• Supported high-definition (HD) formats:

NTSC [email protected], PAL 625@50, [email protected], 720p@24, 720p@25, [email protected], 720p@30, 720p@50,[email protected],

720p@60, 1080i@50, [email protected], 1080i@60, [email protected], 1080p@24, 1080p@25, [email protected], 1080p@30,

1080p@50, [email protected], 1080p@60

Bit Rate: 2.97 Gbps, 2.967 Gbps, 1.485 Gbps, 1.4835 Gbps, 270 Mbps

• Auto 3G/HD/SD-SDI detection

• HDMI 1.2 supported

• Two SDI compliant outputs

• External DIP Switch Configuration

PACKAGE CONTENT

• 1x AT-HD-3GSDI

• 1x 5V power supply

• 1x user’s manual

Toll free: 1-877-536-3976

Local: 1-408-962-0515

2 www.atlona.com

SPECIFICATIONS

Technical

SDI standards

Auto 3G/HD/SD detection

Video bandwidth

Video support

Input signal

Output signal

Output impedance

Synchronization mode

Eye pattern characteristics

Cable equalization

Audio support

PCB stack-up

Input

Output

BNC connector

HDMI connector

DIP switch

Mechanical

Housing

Dimensions

(L x W x H)

Weight

Fixedness

Power supply

Power consumption

Operation temperature

Storage temperature

Relative humidity

Model

Package

Carton

Model

Package

3G-SDI & HD-SDI & SDI

Yes

2.97Gpbs & 2.975/1.001Gbpss

[3G] 1080p50/59.94/60 (4:2:2)

[HD] – 720p@50/59.94/60Hz, 1035i@50/59.94/60Hz, 1080i@50/59.94/60Hz,

1080p@24/30Hz

[SD] – NTSC @59.94Hz, PAL @50Hz

[SD-SDI] SMPTE 259M

[HD-SDI] SMPTE 292M, 296M

[3G-SDI] SMPTE-424M

SDI

75Ω

Internal synchronization or external synchronization

Extra low alignment jitter 0.05UI at HD

[3G-SDI] up to 90m (300ft)

[HD-SDI] up to 150m (500ft)

[SD-SDI] up to 300m (1000ft)

Yes

4-layer board [impedance control — differential 100Ω; single 50Ω]

1x HDMI

2x BNC [SDI]

75Ω inter-locked socket

Type A [19-pin female]

4-pin [video format / audio format / audio group / reserved]

Metal case

160 x 110 x 25mm [6.3”x4.3”x1”]

270 x 175 x 80mm [10.6”x6.9”x3.2”]

450 x 370 x 300mm [1’5.7”x1’2.6”x11.8”]

420g [15oz]

1030g [2.3 lbs]

Inter-locked power supply

5V 4A DC

3 Watts [max]

0~40°C [32~104°F]

-20~60°C [-4~140°F]

20~90% RH [no condensation]

Toll free: 1-877-536-3976

Local: 1-408-962-0515

3 www.atlona.com

SUPPORTED RESOLUTIONS

3G-SDI OUTPUT

1080p @ 50/ 59.94 / 60Hz SMPTE 424M / 425M (4:2:2)

525p @ 59.94Hz

625p @ 50Hz

HD-SDI OUTPUT

SMPTE 293M, ITU-BT.1358

ITU-BT.1358

720p @ 50Hz

720p @ 60 / 59.94Hz

1080i @ 25Hz

1080i @ 30 / 29.97Hz

SMPTE 296M -3

SMPTE 296M -1, -2

SMPTE 274M -6

SMPTE 274M -4, -5

1080p @ 24 / 23.98Hz

1080p @ 25Hz

SMPTE 274M -10, -11

SMPTE 274M -9

1080p @ 30 / 29.97Hz

SMPTE 274M -7, -8

SD-SDI OUTPUT

NTSC

PAL B,D,G,H,I

PANEL DESCRIPTION

1. Front Panel

2. Rear Panel

1 2

1. HDMI input: Plug in a HDMI cable to be linked to an HDMI source

2. +5V power jack: Connect to 5V DC power supply.

1. 3G/HD/SD-SDI output #1: Plug in a coaxial cable to be linked to the SDI display 1

2. Lock LED: showing if the audio/video signal existed or not

3. 3G/HD/SD-SDI output #2: Plug in a coaxial cable to be linked to the SDI display 2

1 2 3

Toll free: 1-877-536-3976

Local: 1-408-962-0515

4 www.atlona.com

DIP SWITCH

A 4-pin DIP switch is used for user interface, and users can access this switch from the bottom of the unit.

Pin No.

OFF ( )

ON ( )

1

Used for

SMPTE352M

2

3G level B

3G level A

3 4

Audio group 3&4 Update EDID

Audio group 1&2 Default EDID

A 4-pin DIP switch is used for user interface, and users can access this switch from the bottom of the unit.

NOTICE

1. Factory default for 4-pin DIP: ON-ON-ON-ON

2. AT-HD-3GSDI mainly embeds the audio channels in audio group 1&2 or 3&4. Please adjust DIP switch pin 3

for setup.

3. While stereo audio is chosen, only the first pair of HDMI audio will placed into CH 1 & 2 of Group 1 or 3,

dependent upon pin 3.

4. In order to keep the compatibility of HDMI to most monitors, AT-HD-3GSDI features EDID learning ability.

The operation is shown in the EDID learning section.

EDID LEARNING

1. Turn off AT-HD-3GSDI and set the pin 4 of DIP switch of AT-HD-3GSDI to OFF.

2. Connect the TV monitor thru HDMI port to AT-HD-3GSDI, and then turn on AT-HD- 3GSDI.

3. The LED of AT-HD-3GSDI will dim and light again, which indicates the EDID learning process is finished.

4. Connect AT-HD-3GSDI to the HDMI source through a HDMI cable and enjoy the experience.

Toll free: 1-877-536-3976

Local: 1-408-962-0515

5 www.atlona.com

SAFETY INFORMATION

Safeguards

To reduce the risk of electric shock, do not expose this product to rain or moisture

Do not modify the wall plug. Doing so will void the warranty and safety features.

If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket.

This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requires

disconnection.

Precautions

FCC regulations state that any unauthorized changes or modifications to this equipment, not expressly approved by the manufacturer, could void the user’s authority to operate this equipment.

Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the product, or cause fires.

In the event of an electrostatic discharge this device may automatically turn off. If this occurs, unplug the device and plug it back in.

Protect and route power cords so they will not be stepped on or pinched by anything placed on or against them. Be especially careful of plug-ins or cord exit points from this product.

Avoid excessive humidity, sudden temperature changes or temperature extremes.

Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, fish tanks, and swimming pools.

Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.

Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or aerosols.

Such products could enter the unit and cause damage, fire, or electric shock. Some substances may also mar the finish of the product.

Never open, remove unit panels, or make any adjustments not described in this manual. Attempting to do so could expose you to dangerous electrical shock or other hazards. It may also cause damage to your AT-HD-

3GSDI. Opening the product will void the warranty.

Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or contact Atlona directly.

Toll free: 1-877-536-3976

Local: 1-408-962-0515

6 www.atlona.com

WARRANTY

Limited Warranty

Atlona Technologies warrants that (a) its products (the AT-HD-3GSDI) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the product will be free from defects in materials and workmanship under normal use and service for a period of

3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt. Some jurisdictions do not allow such limitations on duration of an implied warranty, so the above limitation may not apply to customers that fall within those areas.

Customer Remedies

Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Technologies’ decision, either return of the price paid for the product, repair, or replacement of the product that does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of the Customer’s receipt. This Limited Warranty is void if failure of the product has resulted from accident, abuse, misapplication, or natural occurrence. In example but not limited to: power surges (electrical storms, local power outage), dropping the product (or items on the product), contact with fluids, and physical misconduct (i.e. kicking or punching). Any replacement product will be warranted for the remainder of the original warranty period.

No other warranties

To the maximum extent permitted by applicable law, Atlona Technologies and its suppliers disclaim all other warranties, either expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, with regard to the product and any related written materials. This Limited

Warranty gives customer specific legal rights. Customers may have other rights depending on the jurisdiction.

No liability for damages

To the maximum extent permitted by applicable law, in no event shall Atlona Technologies or its suppliers be liable for any damages arising out of the use of or inability to use this product, even if Atlona Technologies has been advised of the possibility of such damages. Such damages include but are not limited to: special, incidental, consequential, or indirect damages for personal injury, loss of business profits, business interruption, loss of business information, or any other pecuniary loss.

Atlona Technologies’ and its suppliers’ entire liability under any provision of this agreement shall be limited to the amount actually paid by you for the product. Some Jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damage. The above limitations may not apply to you in such jurisdictional cases.

Toll free: 1-877-536-3976

Local: 1-408-962-0515

7 www.atlona.com

ATLONA PRODUCT REGISTRATION

Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase.

Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates.

At Atlona, we respect and protect your privacy, assuring you that your registration information is completely secure. Atlona product registration is completely voluntary and failure to register will not diminish your limited warranty rights.

To register go to: http://www.atlona.com/registration

Toll free: 1-877-536-3976

Local: 1-408-962-0515

8 www.atlona.com