Alcatel Temporis IP800 IP Phone, Elastix Server Setup Guide

Alcatel Temporis IP800
and Elastix Server
Setup Guide
http://www.elastix.org
PaloSanto Solutions
Alcatel Temporis IP800 and Elastix Server Setup Guide
1.0 Setup Diagram
Figure 1-1 is a setup diagram for a single IP Phone Temporis IP800 configuration. The
phone is setup as a SIP telephony device.
Figure 1-1. Setup Diagram
2.0 Host PC Environment
Hardware Type
Hardware Version
Software Type
Software Version
Table 2-1. Host Server Environment Details
Description
Elastix Appliance ELX-Series
ELX-3000
Elastix
2.3
3.0 Test Setup Equipment
Equipment
IP (SIP) Phone
Alcatel IP Phone
Switch
Table 3-1. Test Setup Equipment
Model
N/A
Temporis IP800
N/A
2
Version
N/A
15.60.0.91
N/A
PaloSanto Solutions
Alcatel Temporis IP800 and Elastix Server Setup Guide
4.0 Setup Procedure
To set up the Elastix Server for the Alcatel Temporis IP800,
1. Go to the web address of the Elastix Server Login page. The web address is
determined by the customer, for this guide we have used the IP address
192.168.1.75
2. On the Login page, type the username and password for an administrative user into
the Username and Password fields, see Figure 4-1. The username and password are
determined by the customer.
Figure 4-1. Login
3.
Press Enter or click on the Submit button to go to Elastix’s Dashboard
4. Once inside, click on the PBX tab on the menu at the top of the screen
Figure 4-2. Dashboard
3
PaloSanto Solutions
Alcatel Temporis IP800 and Elastix Server Setup Guide
5. Click on the Submit button to add an extension, see Figure 4-3. This will take you
to the Add SIP Extension page.
Figure 4-3. Add an Extension
6. On the Add SIP Extension page (Figure 4-4), fill in the following information:
• User Extension (301 in this example)
• Display Name (‘AlcatelTemporisIP800 in this example)
• secret (‘h7Dka3Rf9si0t’ in this example)
Figure 4-4. Add SIP Extension
7. Click on the ‘Submit’ button at the end of the page. The extension will be created
and you will see the page on Figure 4-5 displaying the “Apply Configuration
Changes Here” pink ribbon on top of the screen.
8. Click in the “Apply Configuration Changes Here” link
4
PaloSanto Solutions
Alcatel Temporis IP800 and Elastix Server Setup Guide
Figure 4-5. Apply Configuration Changes Here
9. With this you have just finished creating a SIP extension that will be used by the
Alcatel Temporis IP800 to register with the Elastix Server. Repeat Steps 5 through
8 to similarly create another extension (different values on Step 6) to be used by the
IP (SIP) Phone to register as well (extension 302 in this example). Once finished
you will see something similar to Figure 4-6
Figure 4-6. Alcatel and IP Phone extensions successfully created
10. To register the Alcatel Phone, you will need to enter the information from the
extension created on the Elastix Server into the Alcatel Phone by logging into the
Alcatel Temporis IP800 WebUI.
To register the Escene Phone we have two methods: Manual Configuration and
AutoProvisioning using Elastix’s Endpoint Configurator
5
PaloSanto Solutions
Alcatel Temporis IP800 and Elastix Server Setup Guide
MANUAL CONFIGURATION
1. Log in to the Alcatel Temporis IP800 WebUI by pointing your browser to the
phone’s IP address.
For the initial configuration of the Alcatel Phone, refer to the Alcatel Temporis
IP800’s User Manual which can be found in the Alcatel’s product page at:
http://www.atlinks.com/en/fiches/alcatel-temporis-ip-800
Factory default settings
WAN
DHCP
Web Access User Name admin
Web Access Password
admin
2. When prompted, enter the Web Access Username and Web Access Password to
access the Alcatel Temporis IP800 WebUI (Figure 4-7)
Figure 4-7. Alcatel Temporis IP800 Login
3. Use the information from the Add SIP Extension page (Figure 4-4) to enter the
following necessary information on the “Account” section for SIP extension
configuration of the Alcatel Phone WebUI (Figure 4-8):






Account Active: On
Display name: The local phone name showed on others phones when calling
(AlcatelPhone in this case)
Register Name: (301 in this case)
User Name: (301 in this case)
Password: (“h7Dka3Rf9si0t” in this case)
SIP Server: Elastix Server’s IP Address (192.168.1.75 in this case)
6
PaloSanto Solutions
Alcatel Temporis IP800 and Elastix Server Setup Guide
Figure 4-8. SIP Information
4. Once you have entered the required information, click on “Confirm” button located
at the end of the page. You should see ‘Registered’ in the Status field. If you don’t,
make sure you’ve entered the correct information from step 6. (See Figure 4-9).
Figure 4-9. Registered
5. If you create more accounts you need to assign these accounts to the function keys
located next to the phone’s display. For this go to “Phone => Function Keys =>
Line Key” and assign the lines to the keys. See Figure 4-10.
7
PaloSanto Solutions
Alcatel Temporis IP800 and Elastix Server Setup Guide
Figure 4-10. Function Keys – Line Key
6. Configure the other IP (SIP) Phone with the correct parameters.
7. To test the Alcatel Temporis IP800, pick up the previously configured IP (SIP)
Phone and call the Alcatel Temporis’s extension number (301 in this example).
When the call is established, speak into the phone and verify that the other IP (SIP)
Phone can hear your voice. Check this by calling from both ends.
8
PaloSanto Solutions
Alcatel Temporis IP800 and Elastix Server Setup Guide
AUTOPROVISIONING USING ELASTIX’S ENDPOINT
CONFIGURATOR
Note: The support of Endpoint Configurator for Alcatel Temporis IP800 is available in
Elastix 2.4 version (or higher).
1. In Elastix WebUI, go to “PBX => Batch of Extensions => Endpoint Configurator”.
(Figure 4.11)
Figure 4.11 Endpoint Configurator
2. Next to the “Discover Endpoints in this Network” button, type the address where
the phone is located and click the button. This will generate a list with all the
phones available in that network (Figure 4-12).
Figure 4.12 Endpoint Configurator
3. In the row where the phone you want to autoprovision is located (find it according
to either its MAC or IP Address):



Mark the checkbox
From the drop-down list, select the correct “Phone Type” (phone model) of the
phone
From the drop-down list, select the “User Extension” you want to assign to the
phone
9
PaloSanto Solutions
Alcatel Temporis IP800 and Elastix Server Setup Guide
Figure 4.13 Endpoint Configurator
4. Click the “Set” button. When the process finishes loading, the phone will reboot by
itself. In few seconds, it will start applying the configuration. The phone should be
registered and ready for calls now.
5. Configure the other IP (SIP) Phone with the correct parameters.
6. To test the Alcatel Temporis IP800, pick up the previously configured IP (SIP)
Phone and call the Temporis IP800’s extension number (301 in this example).
When the call is established, speak into the phone and verify that the other IP (SIP)
Phone can hear your voice. Check this by calling from both ends.
10