ATX MAXNET Amplifiers, MAXNET RF Detectors, MAXNET Switches Installation Manual

ATX MAXNET Amplifiers, MAXNET RF Detectors, MAXNET Switches Installation Manual

Below you will find brief information for Amplifiers MAXNET.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

ATX MAXNET Amplifiers, RF Detectors & Switches Installation Manual | Manualzz

®

Pat. #s U.S. 6,842,348; 7,043,236;

Cdn. 2,404,840; 2,404,844

®

CCAP ™

Compliant

Amplifiers, RF Detectors & Switches

Installation Manual

Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to make amendments or correct omissions.

Specifications subject to change without notice.

MAXNET ® is a registered trademark of ATX in the United States and/or other countries. Products or features contained herein may be covered by one or more U.S. or foreign patents. Other non-ATX product and company names in this manual are the property of their respective companies.

TABLE OF CONTENTS

Page

1. INSTALLATION INSTRUCTIONS .............................................................................................................1-1

Step 1 ...............................................................................................................................................1-1

1.2.

1.3.

Step 4 ..... ..........................................................................................................................................1-2

2. SERVICE & SUPPORT ..............................................................................................................................2-1

Contact ATX Networks ....................................................................................................................... 2-1

Warranty Information .........................................................................................................................2-1

MAXNET

®

– Amplifiers, RF Detectors, & Switches – Installation Manual i

This page left intentionally blank.

ii MAXNET

®

– Amplifiers, RF Detectors, & Switches – Installation Manual

CHAPTER 1: INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

1. Installation Instructions

1.1 Step 1

Approach chassis with a module on a forward angle. Make sure the captive screw on module lines up with a black triangle on top rail (slot 1, 3, 5, 7, 9, 11, 13, 15, or 17).

TOP RAIL

M

O

DU

LE

BOTTOM RAIL

CHASSIS

1.2 Step 2

Hook connector (located on top of amp module) under the top rail flange.

MAXNET

®

– Amplifiers, RF Detectors, & Switches – Installation Manual 1-1

CHAPTER 1: INSTALLATION INSTRUCTIONS

1.3 Step 3

Straighten the module by bringing the bottom of the module in until perpendicular.

1.4 Step 4

Apply forward pressure until module connects flush to chassis rails. Then tighten captive module screws into chassis.

1-2

When removing module, follow instructions in reverse order.

IMPORTANT: Disconnect connector in top rail first before pulling on bottom of module so as not to damage the connector.

MAXNET

®

– Amplifiers, RF Detectors, & Switches – Installation Manual

CHAPTER 2: SERVICE & SUPPORT

SERVICE & SUPPORT

2. Service & Support

2.1 Contact ATX Networks

Please contact ATX Technical Support for assistance with any ATX products. Please contact ATX Customer Service to obtain a valid RMA number for any ATX products that require service and are in or out-of-warranty before returning a failed module to the factory.

TECHNICAL SUPPORT

Tel:

Toll Free:

► Press * 3 for

(905) 428-6068

Technical Support

► Then press 1 for Digital Video Products (DVIS, DigiVu, UCrypt, etc.)

► OR, press 2 for All Other Products

Email:

Email:

(800) 565-7488 (USA & Canada only) [email protected] for Digital Video Products [email protected] for All Other Products

CUSTOMER SERVICE

ATX Networks

1-501 Clements Road West

Ajax, ON L1S 7H4 Canada

Tel:

Toll Free:

► Press

Fax:

* 1 for

(905) 428-6068

(800) 565-7488 (USA & Canada only)

Customer Service

(905) 427-1964

Toll Free Fax: (866) 427-1964 (USA & Canada only)

Web:

Email: www.atxnetworks.com

[email protected]

2.2 Warranty Information

All of ATX Networks’ products have a 1-year warranty that covers manufacturer’s defects or failures.

MAXNET

®

– Amplifiers, RF Detectors, & Switches – Installation Manual 2-1

Printed in Canada

1-501 Clements Road West, Ajax, ON L1S 7H4 Canada

Tel +1 (905) 428-6068 Toll Free +1 (800) 565-7488

Fax +1 (905) 427-1964 Toll Free Fax +1 (866) 427-1964 www.atxnetworks.com [email protected]

Rev. 04/15 (ANW0544)

advertisement

Key Features

  • CCAP compliant
  • Amplifiers, RF Detectors and Switches
  • Installation instructions
  • Service and support
  • Contact information
  • Warranty information
  • Easy to install
  • User friendly
  • Reliable and durable
  • Strong signal amplification

Frequently Answers and Questions

How do I contact ATX Networks for technical support?
You can reach ATX Technical Support by phone at (905) 428-6068 or toll-free at (800) 565-7488 (USA & Canada only). For Digital Video Products, email [email protected]. For all other products, email [email protected].
How do I contact ATX Networks for customer service?
You can reach ATX Customer Service by phone at (905) 428-6068 or toll-free at (800) 565-7488 (USA & Canada only). You can also contact them by fax at (905) 427-1964 or toll-free fax at (866) 427-1964 (USA & Canada only). Their website is www.atxnetworks.com and their email is [email protected].
What is the warranty on ATX Networks' products?
ATX Networks' products come with a 1-year warranty that covers manufacturer's defects or failures.

Related manuals

Download PDF

advertisement