HD Network Speed Dome Installation Manual
Below you will find brief information for HD Network Speed Dome. This document describes the installation process and configuration options for the speed dome. It includes details on how to connect the dome to a network and configure its various features, such as motion detection, recording, and alarm settings. It also provides instructions on how to use the camera's web interface for remote viewing and control.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
▼
Scroll to page 2
of
63
HD Intelligent Network Speed Dome Installation Manual English Installation Manual for HD Network Intelligent Speed Dome HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 Statement: Thanks for purchasing from us.Please feel free to contact our service whenever you need help. This manual is applicable for Network speed dome products.Features and functions vary with different products,please refer to our physical commodity and the fast manual. This manual is your reference for operations and encodings.Related functions,specific orders, detailed menu-tree as well as fast manual are included.Please read it before installation or use. This manual might contain some technical or print errors.Any enhancement in product features shall be added into the manual consistently without further notice. 2 HD Intelligent Network Speed Dome Installation Manual English Safety Instruction This manual is intended to ensure that user can use the product properly without danger or any property loss.Please read it carefully and take care of it for further reference. Precaution measures are divided into “warnings” and “cautions”,as below: Warnings:Neglecting any of the warnings may cause death or serious injury. Cautions:Neglecting any of the cautions may cause injury or equipment damage. Warning Follow these safeguards to Caution avoid death or serious injury Follow these precautions to prevent potential injury or property loss Warnings 1.Electrical safety regulations of the nation and the region must be strictly followed during installation or use. 2.Please use the matched power adapter from standard company.(DC12V/4A standard or AC24V/2A optional) 3.Do not connect multiple DVRs with one single power adapter(Overload for adapter may lead to over-heat or fire hazard. 4.The device should be firmly fixed when installed onto the wall or beneath the ceiling. 5.Shut down the power while connecting or dismounting the speed dome.Do not operate with power on. 6.Shut down the power and unplug the power cable immediately when there is smoke,odor or noise rising from the DVR.Then contact the dealer or service center. 7.Please contact the local dealer or latest service center when DVR works abnormally.Do not attempt to disassemble or modify the device shall shoulder no responsibility for problems caused by yourself.(We unauthorized repair or maintenance. Cautions 1.Do not drop anything onto the dome,avoid it from physical strike. Keep it away from high electromagnetism radiation surroundings.Do not install it at vibration surface or places subjecting to strike.(Ignorance can cause equipment damage). 2.Do not aim the camera at ultra-bright objects,such as the sun,filament lamp. 3.Keep it away from rain and moisture HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 4.Avoid exposing to direct sunlight,poor-ventilation or heat source such as heater,radiator.(Ignorance can cause fire hazard) 5.To avoid physical damage,extreme environment such as lampblack,water vapour,too hot or dusty are not allowed. 6. Please use soft and dry choth to clean the shell.Use neutral cleaner instead of alkaline when the dirt is difficult to get rid of. 2 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 Catalog Chapter 1 Brief Introduction ...........................................................................................5 1.1 Descriptions .........................................................................................................5 1.2 Functions...............................................................................................................6 Chapter 2 Speed Dome Installation .............................................................................8 2.1 Install Preparation...............................................................................................8 2.2 Installation ............................................................................................................9 2.3 Default Setting ..................................................................................................10 2.4 Dial Switch Setting............................................................................................10 2.5 Alarm Wire .......................................................................................................... 11 Chapter 3 Bracket Installation Instruction.................................................................12 3.1 Bracket Dimension............................................................................................12 3.2 Wall Mount Installation ...................................................................................12 3.3 Ceiling Mount Bracket Installation ...............................................................13 3.4 Pole Mount Bracket Installation ....................................................................13 3.5 Corner Mount Bracket Installation ...............................................................14 Chapter 4 Operation Instruction...............................................................................14 4.1 Power on self test(POST).................................................................................14 4.2 Reboot .................................................................................................................15 4.3 Basic Operations ...............................................................................................15 4.4 Login ....................................................................................................................16 4.5 Preview ................................................................................................................16 Chapter 5 Network Camera Config ............................................................................17 5.1.Record ..................................................................................................................17 5.2. Alarm Function .....................................................................................................19 5.3. System Setting ..................................................................................................23 5.4. Management Tool............................................................................................33 5.5.System Info .........................................................................................................38 Appendix 1 Search Tools ...............................................................................................41 Appendix 2 IE Active X Download...............................................................................43 Appendix 3 Client Application .....................................................................................46 Appendix 4 HD Speed Dome Network Port .............................................................48 3 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 Appendix 5 Lightning & Surge Protection ................................................................ 48 Appendix 6 Wire Path & Distance................................................................................ 49 Appendix 7 AWG Home and Abroad ................................................................................. 50 Appendix 8 Address Coding Table................................................................................ 51 Appendix 9 After-sale Service & Maintenance ........................................................ 56 4 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 Chapter 1 Brief Introduction 1.1 Descriptions Introducing high definition integrated movement,HD network speed dome is featured with automatic focusing and auto white balance,combining PTZ with digital decoder inside.With précised motor drive,it works without jitter at any speed,sensitive and stable.Moreover,built-in web also allows customers to browse via IE.All in all,extraordinary performance and perfect features make it superior with high technology in security and surveillance field. Divided into common speed dome and IR speed dome,it can be applied for areas where high-speed mat is needed or places with poor light,such as,river,forest,railway,airport,port,oil field,sentry,plaza,park,scenic spot,street,station,large venue,outside of the residential area,etc. 1. Infrared Function(Apply to IR speed dome) Quick cooling cast aluminum design CCVE and PWM design ensure IR LED work steadily for a long time IDS,IR brightness adjusted with magnification,distance and brightness. Individual MCU infrared control system,flexible and multiple IR modes 10 grade IR power and illumination Perfect IR vision via IR control and AIO optical filter switch CGS radiating system IP66,TVS4000V lightning and surge protection. 2. System Functions Integrated design,highly reliable CGS radiating system IP66,TVS4000V lightning and surge protection. 3ch digital temperature control system,live monitoring over system,camera,IR panel,auto control over fan and module Multi-axis design Bulit-in heat balance,fog-proof Precise motor drive,accurancy less than 0.1,no shake of pic. 5 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 Support online upgrade,convenient and cost-effective. Support 3D positioning Easy DIP,configured protocol Multi-language and friendly OSD menu Support preset/patrol/pattern/linear scan/frame etc. Support title display Support menu code protection Low consumption,environmental friendly. 3. PTZ Horizontal:0°~360° rotation;Vertical:-5°~92°,auto flip,no blind zone. 255 presets,power-off memory 4 preset cruise scanning,each can add another 32 presets. Support pattern scanning,record time is over 10 min or 1000 orders. Support proportional zoom,rotation speed adjust automatically with lens. Bulit-in RTC clock,16 timing task,individual cycle excution. 4. Built-in HD Integrated Camera Auto IRIS & BLC Auto/manual white balance Auto/manual focus Auto brightness control 1.2 Functions In this chapter,most principles for the functions of the speed dome are descriped,Specific operations are not included.Different platform system operate in multiple ways.We recommend you to follow the operation manual.For special requirement and operations,please contact the dealer. Multi-lingual OSD Menu:With multiple languages,you can check the info and status,and also config the parameters. Self-adaptive to multiple protocols:Compatible with PELCO-D、PELCO-P、TA、HKV,DH and 6 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 other protocols. Control:Pan/tilt movement and lens zoom can be controlled via keyboard,DVR,matrix,etc. Limit stops:Enable this function,speed dome can only monitor within configured areas(left/right,up/down) via keyboard,DVR or client,areas out of the limit can not be monitored. Auto scan:Four scanning modes:preset scanning,horizontal scanning,auto scanning,pattern scanning.Speed can be set via OSD menu from level 1 to 40,the corresponding speed ranging from 1° to 40° per sec. Preset:Each contains the PTZ horizontal position,vertical position and lens zoom.Speed dome move to th defined position when preset is called. Auto flip:Under manual mode,when the targeted object goes beneath the speed dome,the camera flips 180 degrees automatically to track it. Privacy mask:User can define areas which can not be viewed,the masked area moves with the speed dome,horizontally and veitically.The shield area adjust with the lens(Note:Speed dome should support this function) Proportion zoom:Horizontal and vertical speed changes with the proportion of the zoom.When zoom increases,the camera moves slower;when zoom decreases,the camera moves faster. Auto focus:Under this mode,the camera will focus automatically to maintain clear images.When adjusted as “near” and “far” manually,focus distance can be changed.Control the camera to move horizontally,vertically,zoom the lens,then the integrated movement will restore auto focus. Day/night:3 modes:auto,day,night.Under auto mode,the integrated movement turns into color or black/white according to the surroundings.Under manual mode,you can choose color or black/white image via the day and night options from the menu. Low-illumination electronic shutter:Shutter speed goes down automatically and extend the exposure time to get clear and bright images under low-illumination environment. White balance:Compensate the color to get vivid images. Preset cruise scan:4 presets cruise scan,each can add another 32 presets,speed and time can be set alone. Pattern scan:To re-play the PTZ operations including horizontal and vertical movement,zoom,calling presets,Focusing and aperture are default auto. 7 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 Power-off memory:Position info of the speeed dome is stored when the power is off.Reboot the camera,the dome goes back to previous status.The default power-off memory time is 3min. Patrol mode:When speed dome stays without operations,it starts patrol,supported mose:preset 1 to 8,pattern scanning 1 to 4,cruise scanning 1 to 8,horizontal scanning,two points scanning.You can also close this function. Chapter 2 Speed Dome Installation 2.1 Install Preparation 1. Basic requirement Please read the following info before installation: 1) Installation and maintenance should be carried out by professional staff and obey the local electrical regulations.All electric work should follow the latest electrical regulations.Check whether the accessories are complete and confirm whether the place and installation mode is in accordance with requirements.If not,please contact the local dealer and use the product according to the actual environment. 2) Indoor speed dome only applies for inside environment,installed or exposed in rainy or humid place is not allowed. 3) After re-installation or maintenance,resistence between the circuit and the shell need to be checked to make sure there is no short-circuit and the insulation is good. 4) Confirm there is enough space for the speed dome and structure components.Make sure that the total weight of the speed dome and its structure components are within the capability of the ceiling,wall and bracket.Materials should be capable of holding four times weight of the speed dome. 5) Follow the below working environment: Temperature -30~65℃ atmospheric 86~106KPa pressure humidity < 90%RH no power condensing DC12V/5A(standa rd) 8 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 2. Wire preparation The below chart is recommended max.distance for 12DC.(The max.voltage is about 10% for DC/AC device).For more information,please refer to appendix 3—Wire gauge & transmission distance cable diameter max distance(m/ft) 0.75mm2 6m(20ft) 1mm2 9m(30ft) 1.5mm2 12m(40ft) 2mm2 15m(50ft) 3. Please take care of the product package Please keep the orginal package properly after unpacking the camera.Send us the package when there is any problem. 2.2 Installation 1. Speed dome installation For various bracket installation,please refer to chapter 2 and 3 of this manual.Take wall bracket for example: 1) Take out the cable from the speed dome,connect the bracket and cover with 3pcs of screws,then fix it to the wall.(As pic.2.2.1).Note:Waterproof folder is needed. 2) Open dip switch with screw driver,configure the protocol,baud rate and speed dome address(as pic.2.2.2),fefer to chapter2.4—dip switch setting. 3) Remove the gummed tape(as pic.2.2.3),check whether the seal ring on top of the dome is well put. 4) Connect the safe rope of the speed dome to the bracket,then hook up the dome to the connected cover(as pic.2.2.4)Then plug the cable into the right pin according to the reference.(as pic.2.2.5) 5) Fix the speed dome with screws.(as pic.2.2.6) pic.2.2.1 pic.2.2.2 9 pic.2.2.3 HD Intelligent Network Speed Dome pic.2.2.4 Installation Manual pic.2.2.5 Chinese V1.0 pic.2.2.6 2.3 Default Setting protocol: auto match address:NO.1 Baud rate:2400-N-8-1 120Ω ohmic resistance:OFF 2.4 Dial Switch Setting Configure the protocol,baud rate and address before installation.The dip switch is on side of the speed dome(as pic.2.4.7) pic.2.4.7Speed dome dip switch SW1-configure the protocol,baud rate and 120 Ω ohmic resistance;SW2-configure the communication address. SW1 protocol & baud rate switch eg:part of dip switch(protocol & baud rate) 10 SW2 address switch HD Intelligent IP Speed Dome Installation Manual Auto match Chinese V1.0 PELCO-D&2400BPS PELCO-P&9600BPS 1) protocol rule protocol SW1-1 SW1-2 SW1-3 Auto match OFF OFF OFF TA OFF OFF ON PELCO-P ON OFF OFF HKV ON ON OFF DH ON OFF ON /PELCO-D 2) baud rate rule baud rate SW1-4 SW1-5 Auto match /1200BPS OFF OFF 2400BPS ON OFF 4800BPS OFF ON 9600BPS ON ON 3) 120Ω ohmic resistance configuration SW1-8 is the 120 Ω ohmic resistance of RS485.Please config in accordance with <appendix 2 RS485BUS connection>. 4) communication address configuration SW2 is for speed dome address configuration.With binary system,NO.8 is MSB,NO.1 is LSB.For PELCO-D / TA,please refer to appendix 6—table of address code>. 2.5 Alarm Wire Speed dome support 4ch alarm input and 2ch alarm output.As follows: Port name description COM1 alarm output channel ,1common port NO1 alarm NO output channel 1 COM2 alarm output channel ,2common port NO2 alarm NO output channel 2 GND alarm output GND 11 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 IN 4 Alarm input channel 4 IN 3 Alarm input channel 3 IN 2 Alarm input channel 2 IN 1 Alarm input channel 1 GND Alarm input GND Chapter 3 Bracket Installation Instruction This chapter is applied for common bracket installation ,just for reference,for more info,please read the fast manual. 3.1 Bracket Dimension wall mount dimension ceiling mount dimension pole mount dimension corner mount dimension 3.2 Wall Mount Installation 1)accessory installation 12 HD Intelligent IP Speed Dome Installation Manual Wall mount bracket Chinese V1.0 washer&screw cap 2)mount step 3.3 Ceiling Mount Bracket Installation 1)accessory installation ceiling mount bracket(length optional) washer&screw cap 2)mount step 3.4 Pole Mount Bracket Installati 1)accessory installation 13 on HD Intelligent Network Speed Dome wall mount bracket Installation Manual pole mount bracket Chinese V1.0 fastener washer,screw,screw cap 2)mount step 3.5 Corner Mount Bracket Installation 1)accessory installation wall mount bracket corner mount bracket washer,screw,screw cap 2)mount step Chapter 4 Operation Instruction 4.1 Power on self test(POST) Speed dome goes self test after power on.Sequential:system preheat(if necessary),camera test,horizontal test and tilt test.The whole process takes about 40 seconds. 14 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 Note: 1,Confirm the power is matched,turn on the power switch when cable is well connected. 2,External power requirement: 220V±10%/50Hz. 3,We recommend stable power with less interference.UPS protection is needed when allowed. 4.2 Reboot There is soft-reboot and hard-reboot.Go to<device config>-<management tool>,choose reboot-hard-reboot,plug the power,recharge it to reboot the device. Instruction: Power failure recovery:When the power goes off abnormally,reboot the device,previous record info will be saved automatically and recovered after reboot. 4.3 Basic Operations The following operations needed to be done with terminal equipment such as NVR,client software etc.Common operations are listed below(suppose the device can support the following functions).For more info,refer to the control system manual. Horizontal/tilt movement:Move the keyboard or press up/down/left/right button. Zoom operation:Press down”zoom+tele”to zoom in,press down”zoom+wide”to zoom out. Focus operation : Press down”focus+far”,the remote object gets clearer,nearby object gets more obscure. Press down”focus+near”,nearby object gets clearer while the remote object gets more obscure.Speed dome audto adjust the focus to get clear image under auto focus mode.Meanwhile manual focus is still effective. The speed dome will auto adjust focus after other operations. Iris operation : Press down “iris+open”,the iris goes wider,the image turns brighter.Press down”iris+close”,the iris goes narrower,the image gets darker.Under auto iris mode,both iris+open” and ”iris+close”are effective.The speed dome will auto adjust iris after other operations. Preset operation:Speed dome support 255 presets,some preset numbers are preserved for special functions. 15 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 4.4 Login Login after the device bootup.Corresponding functions are provided according to user authority.Default IP: 192.168.1.10,Sub-mask: 255.255.255.0,Gateway: 192.168.1.1.Reserved one user “admin”,default no password.Admin is super user,can change the password but not the authority. pic.4.1 login For safety,go to user management to change user name and psssword when you first login.(refer to chapter 5.5.2 user management). 4.5 Preview After login,pic.4.2 pops up,you may choose main stream or sub-stream with the left preview the recordings. Pic.4.2 Stream selection Date,time and channel info will be displayed at preview interface. 16 to HD Intelligent IP Speed Dome Installation Manual Chapter 5 Network Camera Config Click ,as follows: 5-1 5.1.Record Click ,as follows: 5.1.1. Record settings Click ,as follows: 17 Chinese V1.0 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 5-2 This function allows you to config the time length and pre-record time for each record.We have three settings: Configuration, manual or stop. Configuration:Record according to the set video type (common, detection and alarm). Max.four different time interval can be set per day. Manual: Enable this function,network camera starts record consistently. Stop: Network camera stops recording. Note:1. Detect and alarm recording should match with recordings. 2.Record end time should be longer than start time, 3. Record files are stored into TF card,make sure TF card is plugged in and confirm it. 4. TF card should have enough space for cycle overwrite. 5.Default open,plug TF card,boot up,then record starts. 5.1.2. Snapshot Storage Click ,as follows: 18 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 5-3 Configure the number of snapshot pictures.We have three snapshot modes:configuration,continuous,close. 1. configuration:Configure timing capture among different dates.Timing capture include common snapshot,detect snapshot and alarm snapshot.User can configure four different time interval snapshot at most. 2. continuous:Network camera captures pictures non-stop. 3. close: Network camera stops capturing pictures. Note:1. Detect and alarm snapshot should match with capture functions. 2.Snapshot end time should be longer than start time, 3. Snapshot files are stored into TF card,make sure TF card is plugged in and define it as snapshot disk. 4. TF card should have enough space for cycle overwrite. 5.Default closed,enable it first. 5.2. Alarm Function Click ,as follows: Alarm functions include: motion detect,video blind, video loss, abnormal handle. 19 HD Intelligent Network Speed Dome Installation Manual 5-4 5.2.1. Motion Detect Click ,as follows: 5-5 【Channel】Choose the set motion detect channels,default is one channel. 【Enable】■ means that the motion detect function is on. 20 Chinese V1.0 HD Intelligent IP Speed Dome 【 Sensitivity 】 Installation Manual Choose in the six Chinese V1.0 options according to the sensitivity:lowest/lower/medium/high/higher/highest. 【Region】Config the trigger region. Max.396 regions can be set. 【Period】You can set four periods each day per week.Motion detect alarm won’t be triggered when time is beyond the period. 【Interval】:Shortest time interval between two alarming.The range is 0~600seconds. 【Alarm output】:Enable to link alarm output. 【Delay】Delay a few moments and stop when the alarm state is turned off. The range is 10~300 seconds. 【Record channel】:Local recording starts when triggered.Record detect whould be enabled. 【Tour】:Not supported now. 【Snapshot】:Local capture starts when triggered. Snapshot detect whould be enabled. 【PTZ linkage】:Links to PTZ or presets or cruise when alarm is on. 【Delay】When alarm is over,recording will last some seconds(10~300sec),then stop. 【 Send EMAIL 】 : Alarm emails will be sent to configured email address when triggered.Email address config refer to network service. 【FTP】:Snapshot pictures and record files will be sent to configured FTP server when triggered. FTP config refer to network service. 5.2.2.Video Blind Click ,as follows: 21 HD Intelligent Network Speed Dome Installation Manual 5-6 Set method: refer to chapter5.2.1.. Motion detect 5.2.3.Video Loss Click ,as follows: 5-7 Set method: refer to chapter5.2.1. video loss. .5.2.4.Abnormal handle Device respond to abnormal events. 5-8 22 Chinese V1.0 HD Intelligent IP Speed Dome Installation Manual 【Event Type】 【Enable】 Chinese V1.0 selecting abnormity you want to inspect Select it to make sure abnormal function workable 5.3. System Setting Click , as follows.Configurations include general settings,encoding settings,networksettings,network service,output mode,PTZ config,serial port config and camera operations. 5-9 5.3.1.General Click ,as follows: 23 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 5-10 【System time】Set the system data and time. 【Date format】Choose the data format: YMD, MDY, DMY. 【Daylight Saving Time】:Open and effective time and effective model(effective by week and by date) 【Date Separator】Choose list separator of the data format. Three modes:“—”“/”“.” 【Time Format】Choose time format: 24-hour or 12-hour. 【Language】:Config system language:Simplified Chinese, Traditional Chinese, English and other 20 languages. 【HDD full】:Measures taken by the camera when the HDD is full. overwrite:TF card file overwrites the oldest file when video or capture is full and continue recording and capture. stop recording: Recording and capture stops when TF card recording and capture is full. 【Video Standard】:Video system switch between PAL and NTSC. Device NO. and standby time are not supported now. 24 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 5.3.2.Encode setup Click ,as follows: main stream is on the left,sub-stream is on the right. 5-11 【Resolution】Config for different device. Note:Max.sub-stream resolution can't exceed the main stream. 【Frame Rate】P:1 frame/s~25 frame/s; N: 1 frame/s~30 frame/s Note:Low frame rate will lead to caton,reducing stream transmission. 【Bit Rate Type】You can choose limited code stream or variable code stream. 【image quality】Effective when it is variable code stream.Switch between worse/bad/general/good/better/best.The larger code stream value the better image quality. 【I frame interval】:Camera capture key frame time interval,can be set between 2-12S. Note:When I frame interval is too large, the preview screen will Caton. 【video/audio】:When main stream is open,it is default not to be modified.Sub-stream needs to be enabled manually.Audio for both the streams needs to be enabled manually. Note:①Sub stream should be enabled when used for mobile monitoring. 【Encoder static configuration】:Set the camera coding level,switch between baseline/main profile/high profile,The higher the level,the larger the stream,the better the preview quality. 5.3.3.Network setup Click ,as follows: Configure the camera's IP address, gateway, DNS, etc.. 25 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 5-12 【 Automatically obtain an IP address 】: Camera connect to the router(DHCP shold be enabled),then IP address will be obtained automatically. 【IP address】Set the IP address. Default: 192.168.1.10. 【Subnet mask】Set the subnet mask code. Default: 255.255.255.0.should match with the PC. 【Gateway】Set the default gateway. should match with the PC. 【DNS server】 :Config the DNS server,should match with the PC,wrong DNS will get the cloud service out of work. 【TCP port】Default: 34567. 【HTTP port】Default: 80. Note: When camera is connected to public network via PPPOE, 3G or port mapping, HTTP port required to change the non-80 ports. 【MAC】:Show the physical address of the camera, MAC address for ARSP and other functions. 【Transfer Policy】There are four strategies: Adaptive / Quality Priority / Smooth priority /Network transmission Priority. Adaptive: when network bandwidth is small, the preview screen automatically jump to sub-stream to ensure smooth preview Quality Priority: Whether the network bandwidth is large enough, the preview screen is always displayed in the main stream, when the bandwidth is not large enough ,screen will 26 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 Caton. Smooth priority: Change encoder settings and lower the stream without reducing frame rate to ensure the smooth screen. Network transmission priority: When multiple users login the same camera,limit the user with the smallest bandwidth. 5.3.4.NetService Click ,as follows:to config the email,wifi and other functions. 5-13 【IP permission】 :Config the blacklist and whitelist. blacklist:Address under blacklist cannot access to the camera,max.64 addresses can be added. whitelist:Address under whitelist can access to the camera,those haven’t been added have no access, max.64 addresses can be added. Note:The same IP address can not be added into blacklist and white list at the same time. 【DDNS】 :Set DDNS, support CN99, Oray and other mainstream free domain names. Note:Got to domain website, register CN99 and obtain domain name,account and password before use. 【 Email 】: Config email address for alarm messages sending and receiving,support 27 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 QQ,sina,Gmail,mobile email,netease mailbox.Confirm SMTP is enabled before use. 5-14 Email settings [SMTP server]:Login mailbox to search for how to fill in SMTP server. Note:NetEase mailbox registered before November, 2006 can support SMTP. [Port,SSL]:Consistent with mailbox configuration, you can log in to view the mailbox settings. [User name]:Just fill in the e-mail address before the @ part. [Addressee]:You can config 3 email addresses, separated by a semicolon, can be the same with outbox. [Theme]:Config email theme,can be modified. [Mail Test]:After configuration,click mail test to config whether the email is valid. 【NTP settings】 :Camera system time synchronize with the designated PC,enable the NTP service before use. [Server address]:PC and the camera should be within the same LAN and same IP subnet. 【PPPOE】:Camera connect to the public network via PPOE dial-up,contact the network operator for the user name and password.After successful dialing,public IP address will be displayed. Note:Some 80 ports are sealed by the operator,pls change the http port as non-80 port. 【ARSP】 :We provide domain name service,user can setup their own DNS server or use our free DNS server. Server address:http://xmsecu.com:8080 Register at website to get user name and password。 【Phone monitoring】 :Login camera via monile,support Android、iOS、Windows Phone, 28 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 For details, see Appendix I. Note:Confirm the phone is connected with network,sub-stream is enabled. 【UPNP】 :Router goes port mapping and fixed port automatically towards the camera. Note:Make sure UPNP is enabled,camera and router share the same network. 【FTP】:Upload the alarm recording or capture to designated FTP server. [Server address]:Designated FTP server address,can be local network or public FTP server. [Port, username, password, etc.]: Pls contact FTP server administrator. 【Alarm Center】 :Upload alarm info to alarm center of the designated IP address. 【RTSP】 :Support cross browsr,VLC preview screen. Note:Support Apple, Google, Firefox browser, PTZ control, main and sub stream switching, install QUICKTIME plug-in before use. 【DAS】:Enable it,then dock to MYEYE monitoring platform,refer to Appendix II MYEYE monitoring platform instruction. 【Cloud Services】:Cloud service instructions,refer to Appendix III cloud instructions. 【PMS】:Alarm information push, enabled it,then speed dome can deliver alarm info to mobile with EyeCloud. [Server address]:input server address for push.umeye.cn. [Port]:input server port for push.umeye.cn. Note:Add the serial number to EeyeCloud mobile client. 5.3.5. GUI Display Click ,as follows:to config channel name. 29 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 5-15 【Channel Name】 :Set the camera channel name, up to 26 characters, special characters are not supported. 【Regional coverage】 :Set the camera coverage area number, location and size, can set up four coverage area. 【Time title, channel title】:Config whether the time title and channel title are displayed and the display area. 5.3.6. PTZ setting Click ,as follows: 5-16 Check PTZ protocol, address, baud rate and save the configuration information. Note:PTZ might break down when any of the following dismatch with the PTZ:protocol, address, baud rate. 5.3.7. Serial port settings Click ,as follows: Serial port will be disabled when baud rate,data bits, protocol configuration are not consistent with PC. 30 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 5-17 5.3.7. Camera parameters Click ,as follows: 5-18 【Exposure Mode】 :Config the exposure time,can be switched between auto/manual,1/50 to 1/10000S .the shorter the exposure time, the darker the preview screen. [Day/Night Mode]: Modify day/night mode manually. Auto: The camera automatically control color of the preview screen according to the actual 31 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 ambient light. Color: The camera remains color preview screen instead of turning black and white when there is insufficient ambient light. Black/white:Camera preview turns black/white when there is sufficient ambient light. [BLC]: Turn off or turn on the backlight compensation.With BLC on,main scenery of the center can be seen under bright environment. [Auto Iris]: Turn off or turn on auto-iris [Profiles]: automatic, indoor and outdoor. [Auto Exposure Reference]: Set the camera's exposure, selectable between 0 and100, the larger the reference value, the brighter the preview screen, whereas darker. [Day & Night Threshold] : associated with IR_CUT switching modes. IR_CUT automatic switching mode: automatic day and night mode is the critical point, the threshold greater the higher the brightness, whereas lower. IR_CUT IR synchronous switching mode: 10-20 to close the switching threshold stabilizer,21-30 Debounce time 3s ,31-40 Debounce time 4s ,41-50 Debounce time 5s. [WDR]: Set the WDR closed or open.When WDR is on,adjust the cap under bright background to see the main scenery clearly. [AE Sensitivity ]: When ambient light dramatically changes, the length of time the camera takes to adapt to the light changes.the higher the sensitivity, the shorter to adapt. [AGC]: Set AGC turned off or turned on.Auto adjust the sensitivity of the camera according to the ambient light changes to change the screen brightness. [E Slow Shutter] : Set the electronic shutter off, weak, medium and strong to increase the brightness by accumulation, to prolong the exposure time to enhance the image sensor under low light illumination. [IR_CUT]: can be set as automatically switch or infrared synchronous switch. Automatic switch: ICUT switch according to the brightness level of the actual environment Infrared Salvos: ICUT switch is determined by the state of infrared light. [Day Noise level] : Eliminate the screen lit when the light is sufficient,the higher the level,the better the reduction. [Evening Noise level] : Eliminate the preview screen noise level when there is insufficient light, the higher the noise level, the better. 【Front-end command】 :Send orders to front-end to adjust camera parameters [Mirror]: When you enable it,the preview screen flip around 90 °. 32 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 [Flip]: When you enable it,the preview screen turn upside down 90 °. [Fluorescent anti-flash]:To get rid of the horizontal fluorescent stripes of preview screen with fluorescent lamp. [IR lens reverse order]: IR_CUT reverse order. 5.4. Management Tool Click ,as follows. You can config HDD management,user management,automatic maintenance, restore default, import and export,restart, system upgrades and other functions. 5-19 5.4.1. HDD management Click ,as follows: 33 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 5-20 [Driveis set to read-write] : The partition or TF card can be used for recording only. 【Driveis set to snapshot】:The partition or TF card can be used for capture only. 【Driveis set to read-only】 :New recordings or capture files can not be written in the partition or TF card cannot,can playback only. 【Format the disk】 :Format the partition or TF card and delete all. 【Partition】:TF card for partition. Note:①We recommend Genuine Kingston TF card,capacity greater than or equal 4G. ②Make sure that each partition is larger than 1024M. ③Format TF card before partition,data will be lost. 5.4.2. User Management Click ,as follows: 34 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 5-21 [Modify User]: Modify the added user name, whether reuse, notes, group, class, and permissions. [Modify Group]: modify the added group name, notes and permissions. Note:Reserved group and user name can not be modified. 【Change Password】:Change the password. 【Add user】:Set new user name, password, notes, owning group, permissions and other information, can add up to 64 user names. 【Add Group】 :Config the added group name,notes,permissions and other information. 【delete user】 :Delete the selected user,can not delete the registry. 【delete group】 :Delete the selected user group, when the group contains the user,it can not be deleted. Note:Reserved user and combined user can not be deleted. 5.4.3. Auto Maintenance Click ,as follows: 35 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 5-22 [Automatic restart]: Set the camera automatically restart at some point during the day, the default restart 1:00 Tuesday. [Automatically delete old files]: System will automatically delete videos and drawings within 1-255 days, the default is never deleted. 5.4.4. Restore Default Click ,as follows: 5-23 Available for general configuration, encoding settings, video settings, alarm settings, 36 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 network settings, etc. Single, multiple or all the settings can be restored factory settings. 5.4.5. Import and Export Click ,as follows: 5-24 [Configuration Export, Import]: Export current config file,the CFG file format can be imported into another camera with same configuration. Note:Import one config file into multiple cameras,the IP address are the same,user need to modify the IP address manually. [Export Log] : Export camera log information. 5.4.6. Restart Click ,as follows,click restart,camera soft-reboot via client. 5.4.7. System Upgrade Click ,as follows,Select the correct upgrade file via browsing, click Upgrade to begin the upgrade, the upgrade process will be displayed, pop-up dialog box when upgrade is successful, the camera automatically soft reboot when the upgrade is complete. 37 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 5-25 5.5.System Info Click as follows,HDD info,log info,version info can be searched. 5-26 5.5.1. HDD info Click as follows,total capacity, remaining capacity, begin and end recording time 38 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 and other information can be searched. 5-27 [drive type and capacity]: check the partition type, total capacity, remaining capacity, and status information. [DVR time]: check start time and end time of the recordings and cature. 5.5.2. Log info Click as follows,all info or parted info can be searched. 39 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 5-28 [Type]: Check the log info,including all, system operation, configuration operations, data management, alarm events, recording operation, user management, file operations [Start, end time]: Check the start time and end time of the log. Results show only the log information within time period. [Query]: Query all logs. [Export Log] : Export log information. [Empty]: Clear all log information. 5.5.3. Version Info Click as follows,HDD info,program version and serial number can be searched. 5-29 [Video channel, extended channel, alarm input, alarm output]: Display the current camera hardware, support alarm input and output. [System Version]: Display the camera model and other information. [Release Date]: The current program release time. Note: Contact company's technical staff, provide system version and release dates for technical support. [System uptime]: Cumulative running time after the powering on. Note:After reset,the system uptime is cleared. 40 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 [Serial number]: 16-bit serial number, for cloud services. [NAT state] : When the camera is connected to cloud server, the connection is successful, otherwise remarkable is probing DNS. [NAT status code] : Camera connect to cloud services,displays IP address of the server. Appendix 1 Search Tools 1. Double-click General_DeviceManage file, follow the prompts to complete the installation search tool 2.Double-click to open the search tool. [Search] Search within the same LAN equipment online ball machine, the search results display the IP dome, HTTP and TCP port, Mac address, cloud serial numbers and other information. [Web access] selected search out the IP, click the web access button to automatically jump to the corresponding ball machine login screen. [Add Device] Add You need to upgrade ball machine ip address, port number, user name and password. Figure: [Reboot] to select the device you want to restart the ip, click [Reboot] restart ball machine. 41 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 [Filename] displays the path and name of the upgrade file. [Browse] on the local pc Browse to select the file you want to upgrade. [Upgrade] to select the correct file click on the button, the ball starts the upgrade process. Note: The upgrade process can not disconnect the power and network cables Through the right side of the interface function tool, you can modify the IP address of the ball machine. Select a ball machine's IP address, the function column on the right shows the current ball machine's IP address, subnet mask, gateway and other information; may be modified by directly entering the IP address, gateway, etc. in the display column. [consistent with the local pc] After IP address modification is completed, click on the function keys to make the subnet mask and default gateway and local pc consistent. [HTTP port] to display the current default HTTP port ball machine, ball machine can be entered directly modify the HTTP port. [TCP port] to display the current default TCP port ball machine, ball machine can be entered directly modify the TCP port. Note: Modify the port need to restart to take effect. [Modify Network Parameters for the modified IP addresses, ports, etc. save. [Senior] Click [Advanced] to enter the advanced configuration page. [DNS1] equipment preferred DNS server. [DNS2] equipment alternate DNS server. [Consistent with local pc] Consistent with the local pc's DNS server. [Monitor] After checking the phone handset can be monitored. 42 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 [DDNS] can be registered ddns choose ddns registration of a registered type. After successful registration, fill in your registered domain name of the domain name, password, and then check the [Enable]. Domain name so that you can visit. [Wifi] Click [Settings] to enter the wifi configuration page. (First make sure your devices are installed wifi modules can be wifi access) [Search] SSID wireless routing search. Displays SSID, signal strength and other information after the search was successful. Note: Make sure your router has a wireless routing and turned SSID broadcast function. [Enable] to enable WIFI function, you can set enabled wireless router to connect, connection password, dome IP address. [DHCP] automatically get the ball machine WIFI ip address, without manual configuration. [Encryption] to display the connected wireless router encryption. 【password】The password of the wireless router. Note: Make sure the password is correct, or can not connect successfully. [IP address] to manually set the ball machine WIFI IP addresses. [Subnet Mask] to manually set the ball machine WIFI subnet mask. [Default Gateway] to manually set the ball machine WIFI gateway. Appendix 2 IE Active X Download Installation preparations 43 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 After the ball with a user's computer network to ensure that all hardware connections are complete and the device is powered properly, turn on the computer, run the ball ping network IP address (Note: The network of the ball in the LAN IP address must be unique), such as network IP for the ball 192.168.1.10, run ping 192.168.1.10, if the network has shown the following responses ball, which means that the network connection is normal, you can download the plug-in. Start downloading plug-ins Open IE browser, enter the IP address of the network the ball in the address bar (default is 192.168.1.10) the system will prompt whether to install this plug-in, click Install, the browser will automatically load the IE plugin. Note: If the user's computer related controls to intercept such software, they will load the plug-in to intercept, then this software settings to allow the installation. After the exclusion of the above reasons, plug-in installation still fails, then please change the security level of IE browser and allows to start some control. Specific methods are as follows: 1.Do the following to install in the default level ①In the address bar enter IP, the system displays the following message: ② 单击上图中的“允许” ,出现如下图标注所示提示: ③Click "Install" pop-up dialog box as shown below: 44 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 Plug-in installation fails, you need to modify the IE security level, so that the plug has permission to install, modify the permissions as follows. 2. In IE interface to select Tools-Internet Options - Security - Custom Level conduct shown IE security level custom settings, as shown below. 45 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 Enable permission to download and install Activex controls and plug-ins, as shown in the following figure. After confirming the application, refresh the IE browser to begin downloading and installing IE controls. Appendix 3 Client Application 1.Double-click“General_CMS_Chn.exe”to install client. 2.When it is installed, Shortcuts will be at the desk.Double-click it to open the software. 46 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 3.CMS operate interface 【Device display area】In this area,you can preview live screens by device and super account administrator setting,click device name or channel group to change channes.You can also drag the device name or channel to operation areas. 【Operation area】You can preview live screens ,and setup parameters when system configuration and video searching in this area. Close: Close the current channel live screen. Close all windows: Close the current live screen all channels. Audio: Select this to hear the sound of live preview Client recording,client recording,saved in the corresponding disk. Local amplification: the current channel partial enlarged Snapshot:Capture the pic of current time and channel,then save in the corresponding disk. Bidrectional talk:Select it to talk to the device. Device configuration: enter the device configuration interface Image Color:config the color of current channel. Full screen: full screen display of the current channel [Time Display] To display the local computer system time. 【PTZ】PTZ control and operations 47 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 [screen-split area] select the monitoring channel numbers, there are 1-64 optional. 【Operation log】It will display any operation informations when setup and operating. 【Menu Area】Users could set single menu and sub-menu in this area,select relevant menus to operate video surveillance system in the control center. Appendix 4 HD Speed Dome Network Port The default network port: 80 Web 34567 Communication TCP audio*video data transmission bidrectional talk data transmission RTSP 8899 Onvif 554 streaming media Appendix 5 Lightning & Surge Protection Introducing TVS lightning protection technology,our product is capable of preventing instaneous lightning under 4000V,avoiding equipment damage caused by electric surge.To install the speed dome outside,the following protection measures are necessary on premise of electric safety: Signal transmission line must be kept at least 50 meters form high voltage equipment and cables. Layout the routing under eaves for outside cabling. For open field,lay the sealed steel tube underground,adopt one-point grounding mode.Overhead wiring is forbidden. For surroundings with intense thunderstorms or high induced voltage(such as high-voltage substation),extra high power lightning protection equipment and lightning rod must be used. Outdoor installation and wiring must conform to the requirements of buildings’lighting 48 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 prevention,and comply with related national and industry standards. Equipotential grounding.Grounded device must meet double requirements,anti-jamming and electric safety,and it mustn’t be short-circuited or hybrid-circuited with neutral leg of forceful electric power.When system grounded alone,the impedance can’t be over 4Ω,sectional area of grounded wire must be more than 25 m㎡.For speed dome camera,please refer to installation manual. Appendix 6 Wire Path & Distance Recommended max.transmission distance when wire diameter is given and 24AC power loss is less than 10%.(For AC-powered device,max.power loss is 10%.For instance,the rated power for the device is 80w,35 feet(10meters) away form the transformer,then the min.wire diameter is 0.8mm) 0.80 1.00 1.25 2.00 10 283(86) 451(137) 716(218) 1811(551) 20 141(42) 225(68) 358(109) 905(275) 30 94(28) 150(45) 238(72) 603(183) 49 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 40 70(21) 112(34) 179(54) 452(137) 50 56(17) 90(27) 143(43) 362(110) 60 47(14) 75(22) 119(36) 301(91) 70 40(12) 64(19) 102(31) 258(78) 80 35(10) 56(17) 89(27) 226(68) 90 31(9) 50(15) 79(24) 201(61) 100 28(8) 45(13) 71(21) 181(55) 110 25(7) 41(12) 65(19) 164(49) 120 23(7) 37(11) 59(17) 150(45) 130 21(6) 34(10) 55(16) 139(42) 140 20(6) 32(9) 51(15) 129(39) 150 18(5) 30(9) 47(14) 120(36) 160 17(5) 28(8) 44(13) 113(34) 170 16(4) 26(7) 42(12) 106(32) 180 15(4) 25(7) 39(11) 100(30) 190 14(4) 23(7) 37(11) 95(28) 200 14(4) 22(6) 35(10) 90(27) Appendix 7 AWG Home and Abroad 2 Metric bare wire dia.(mm) USA Wire Gauge British Wire AWG SWG Cross-sectional area mm 0.050 43 47 0.00196 0.060 42 46 0.00283 0.070 41 45 0.00385 0.080 40 44 0.00503 0.090 39 43 0.00636 0.100 38 42 0.00785 0.110 37 41 0.00950 0.130 36 39 0.01327 0.140 35 0.160 34 0.180 33 0.200 32 0.01539 37 0.02011 0.02545 35 50 0.03142 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 0.230 31 0.04115 0.250 30 33 0.04909 0.290 29 31 0.06605 0.330 28 30 0.08553 0.350 27 29 0.09621 0.400 26 28 0.1257 0.450 25 0.560 24 24 0.2463 0.600 23 23 0.2827 0.710 22 22 0.3958 0.750 21 0.800 20 21 0.5027 0.900 19 20 0.6362 1.000 18 19 0.7854 1.250 16 18 1.2266 1.500 15 2.000 12 0.1602 0.4417 1.7663 14 3.1420 2.500 4.9080 3.000 7.0683 Appendix 8 Address Coding Table SW2 Address Setting 51 HD Intelligent Network Speed Dome Add. 1 2 3 4 5 Installation Manual 6 7 8 Add 1 2 Chinese V1.0 3 4 5 6 7 8 1 ON OFF OFF OFF OFF OFF OFF OFF 33 . ON OFF OFF OFF OFF ON OFF OFF 2 OFF ON OFF OFF OFF OFF OFF OFF 34 OFF ON OFF OFF OFF ON OFF OFF 3 ON ON OFF OFF OFF OFF OFF OFF 35 ON ON OFF OFF OFF ON OFF OFF 4 OFF OFF ON OFF OFF OFF OFF OFF 36 OFF OFF ON OFF OFF ON OFF OFF 5 ON OFF ON OFF OFF OFF OFF OFF 37 ON OFF ON OFF OFF ON OFF OFF 6 OFF ON ON OFF OFF OFF OFF OFF 38 OFF ON ON OFF OFF ON OFF OFF 7 ON ON ON OFF OFF OFF OFF OFF 39 ON ON ON OFF OFF ON OFF OFF 8 OFF OFF OFF ON OFF OFF OFF OFF 40 OFF OFF OFF ON OFF ON OFF OFF 9 ON OFF OFF ON OFF OFF OFF OFF 41 ON OFF OFF ON OFF ON OFF OFF 10 OFF ON OFF ON OFF OFF OFF OFF 42 OFF ON OFF ON OFF ON OFF OFF 11 ON ON OFF ON OFF OFF OFF OFF 43 ON ON OFF ON OFF ON OFF OFF 12 OFF OFF ON ON OFF OFF OFF OFF 44 OFF OFF ON ON OFF ON OFF OFF 13 ON OFF ON ON OFF OFF OFF OFF 45 ON OFF ON ON OFF ON OFF OFF 14 OFF ON ON ON OFF OFF OFF OFF 46 OFF ON ON ON OFF ON OFF OFF 15 ON ON ON ON OFF OFF OFF OFF 47 ON ON ON ON OFF ON OFF OFF 16 OFF OFF OFF OFF ON OFF OFF OFF 48 OFF OFF OFF OFF ON ON OFF OFF 17 ON OFF OFF OFF ON OFF OFF OFF 49 ON OFF OFF OFF ON ON OFF OFF 18 OFF ON OFF OFF ON OFF OFF OFF 50 OFF ON OFF OFF ON ON OFF OFF 19 ON ON OFF OFF ON OFF OFF OFF 51 ON ON OFF OFF ON ON OFF OFF 20 OFF OFF ON OFF ON OFF OFF OFF 52 OFF OFF ON OFF ON ON OFF OFF 21 ON OFF ON OFF ON OFF OFF OFF 53 ON OFF ON OFF ON ON OFF OFF 22 OFF ON ON OFF ON OFF OFF OFF 54 OFF ON ON OFF ON ON OFF OFF 23 ON ON ON OFF ON OFF OFF OFF 55 ON ON ON OFF ON ON OFF OFF 24 OFF OFF OFF ON ON OFF OFF OFF 56 OFF OFF OFF ON ON ON OFF OFF 25 ON OFF OFF ON ON OFF OFF OFF 57 ON OFF OFF ON ON ON OFF OFF 26 OFF ON OFF ON ON OFF OFF OFF 58 OFF ON OFF ON ON ON OFF OFF 27 ON ON OFF ON ON OFF OFF OFF 59 ON ON OFF ON ON ON OFF OFF 28 OFF OFF ON ON ON OFF OFF OFF 60 OFF OFF ON ON ON ON OFF OFF 29 ON OFF ON ON ON OFF OFF OFF 61 ON OFF ON ON ON ON OFF OFF 30 OFF ON ON ON ON OFF OFF OFF 62 OFF ON ON ON ON ON OFF OFF 31 ON ON ON ON ON OFF OFF OFF 63 ON ON ON ON ON ON OFF OFF 32 OFF OFF OFF OFF OFF ON OFF OFF 64 OFF OFF OFF OFF OFF OFF ON OFF SW2 Address Setting(continued) 52 HD Intelligent IP Speed Dome Add. 1 2 3 4 Installation Manual 5 6 7 8 Add 1 Chinese V1.0 2 3 4 5 6 7 8 65 ON OFF OFF OFF OFF OFF ON OFF 97 . ON OFF OFF OFF OFF ON ON OFF 66 OFF ON OFF OFF OFF OFF ON OFF 98 OFF ON OFF OFF OFF ON ON OFF 67 ON ON OFF OFF OFF OFF ON OFF 99 ON ON OFF OFF OFF ON ON OFF 68 OFF OFF ON OFF OFF OFF ON OFF 100 OFF OFF ON OFF OFF ON ON OFF 69 ON OFF ON OFF OFF OFF ON OFF 101 ON OFF ON OFF OFF ON ON OFF 70 OFF ON ON OFF OFF OFF ON OFF 102 OFF ON ON OFF OFF ON ON OFF 71 ON ON ON OFF OFF OFF ON OFF 103 ON ON ON OFF OFF ON ON OFF 72 OFF OFF OFF ON OFF OFF ON OFF 104 OFF OFF OFF ON OFF ON ON OFF 73 ON OFF OFF ON OFF OFF ON OFF 105 ON OFF OFF ON OFF ON ON OFF 74 OFF ON OFF ON OFF OFF ON OFF 106 OFF ON OFF ON OFF ON ON OFF 75 ON ON OFF ON OFF OFF ON OFF 107 ON ON OFF ON OFF ON ON OFF 76 OFF OFF ON ON OFF OFF ON OFF 108 OFF OFF ON ON OFF ON ON OFF 77 ON OFF ON ON OFF OFF ON OFF 109 ON OFF ON ON OFF ON ON OFF 78 OFF ON ON ON OFF OFF ON OFF 110 OFF ON ON ON OFF ON ON OFF 79 ON ON ON ON OFF OFF ON OFF 111 ON ON ON ON OFF ON ON OFF 80 OFF OFF OFF OFF ON OFF ON OFF 112 OFF OFF OFF OFF ON ON ON OFF 81 ON OFF OFF OFF ON OFF ON OFF 113 ON OFF OFF OFF ON ON ON OFF 82 OFF ON OFF OFF ON OFF ON OFF 114 OFF ON OFF OFF ON ON ON OFF 83 ON ON OFF OFF ON OFF ON OFF 115 ON ON OFF OFF ON ON ON OFF 84 OFF OFF ON OFF ON OFF ON OFF 116 OFF OFF ON OFF ON ON ON OFF 85 ON OFF ON OFF ON OFF ON OFF 117 ON OFF ON OFF ON ON ON OFF 86 OFF ON ON OFF ON OFF ON OFF 118 OFF ON ON OFF ON ON ON OFF 87 ON ON ON OFF ON OFF ON OFF 119 ON ON ON OFF ON ON ON OFF 88 OFF OFF OFF ON ON OFF ON OFF 120 OFF OFF OFF ON ON ON ON OFF 89 ON OFF OFF ON ON OFF ON OFF 121 ON OFF OFF ON ON ON ON OFF 90 OFF ON OFF ON ON OFF ON OFF 122 OFF ON OFF ON ON ON ON OFF 91 ON ON OFF ON ON OFF ON OFF 123 ON ON OFF ON ON ON ON OFF 92 OFF OFF ON ON ON OFF ON OFF 124 OFF OFF ON ON ON ON ON OFF 93 ON OFF ON ON ON OFF ON OFF 125 ON OFF ON ON ON ON ON OFF 94 OFF ON ON ON ON OFF ON OFF 126 OFF ON ON ON ON ON ON OFF 95 ON ON ON ON ON OFF ON OFF 127 ON ON ON ON ON ON ON OFF 96 OFF OFF OFF OFF OFF ON ON OFF 128 OFF OFF OFF OFF OFF OFF OFF ON 53 HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 SW2 Address Setting(continued) Add. 1 2 3 4 5 6 7 8 Add 1 2 3 4 5 6 7 8 ON OFF OFF OFF OFF OFF OFF ON 161 ON OFF OFF OFF OFF ON OFF ON . 130 OFF ON OFF OFF OFF OFF OFF ON 162 OFF ON OFF OFF OFF ON OFF ON 131 ON ON OFF OFF OFF OFF OFF ON 163 ON ON OFF OFF OFF ON OFF ON 132 OFF OFF ON OFF OFF OFF OFF ON 164 OFF OFF ON OFF OFF ON OFF ON 133 ON OFF ON OFF OFF OFF OFF ON 165 ON OFF ON OFF OFF ON OFF ON 134 OFF ON ON OFF OFF OFF OFF ON 166 OFF ON ON OFF OFF ON OFF ON 135 ON ON ON OFF OFF OFF OFF ON 167 ON ON ON OFF OFF ON OFF ON 136 OFF OFF OFF ON OFF OFF OFF ON 168 OFF OFF OFF ON OFF ON OFF ON 137 129 ON OFF OFF ON OFF OFF OFF ON 169 ON OFF OFF ON OFF ON OFF ON 138 OFF ON OFF ON OFF OFF OFF ON 170 OFF ON OFF ON OFF ON OFF ON 139 ON ON OFF ON OFF OFF OFF ON 171 ON ON OFF ON OFF ON OFF ON 140 OFF OFF ON ON OFF OFF OFF ON 172 OFF OFF ON ON OFF ON OFF ON 141 ON OFF ON ON OFF OFF OFF ON 173 ON OFF ON ON OFF ON OFF ON 142 OFF ON ON ON OFF OFF OFF ON 174 OFF ON ON ON OFF ON OFF ON 143 ON ON ON ON OFF OFF OFF ON 175 ON ON ON ON OFF ON OFF ON 144 OFF OFF OFF OFF ON OFF OFF ON 176 OFF OFF OFF OFF ON ON OFF ON 145 ON OFF OFF OFF ON OFF OFF ON 177 ON OFF OFF OFF ON ON OFF ON 146 OFF ON OFF OFF ON OFF OFF ON 178 OFF ON OFF OFF ON ON OFF ON 147 ON ON OFF OFF ON OFF OFF ON 179 ON ON OFF OFF ON ON OFF ON 148 OFF OFF ON OFF ON OFF OFF ON 180 OFF OFF ON OFF ON ON OFF ON 149 ON OFF ON OFF ON OFF OFF ON 181 ON OFF ON OFF ON ON OFF ON 150 OFF ON ON OFF ON OFF OFF ON 182 OFF ON ON OFF ON ON OFF ON 151 ON ON ON OFF ON OFF OFF ON 183 ON ON ON OFF ON ON OFF ON 152 OFF OFF OFF ON ON OFF OFF ON 184 OFF OFF OFF ON ON ON OFF ON 153 ON OFF OFF ON ON OFF OFF ON 185 ON OFF OFF ON ON ON OFF ON 154 OFF ON OFF ON ON OFF OFF ON 186 OFF ON OFF ON ON ON OFF ON 155 ON ON OFF ON ON OFF OFF ON 187 ON ON OFF ON ON ON OFF ON 156 OFF OFF ON ON ON OFF OFF ON 188 OFF OFF ON ON ON ON OFF ON 157 ON OFF ON ON ON OFF OFF ON 189 ON OFF ON ON ON ON OFF ON 158 OFF ON ON ON ON OFF OFF ON 190 OFF ON ON ON ON ON OFF ON 159 ON ON ON ON ON OFF OFF ON 191 ON ON ON ON ON ON OFF ON 160 OFF OFF OFF OFF OFF ON OFF ON 192 OFF OFF OFF OFF OFF OFF ON ON 54 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 SW2 Address Setting(continued) Add. 1 2 3 4 5 6 7 8 Add 1 2 3 4 5 6 7 8 ON OFF OFF OFF OFF OFF ON ON 225 ON OFF OFF OFF OFF ON ON ON . 194 OFF ON OFF OFF OFF OFF ON ON 226 OFF ON OFF OFF OFF ON ON ON 195 ON ON OFF OFF OFF OFF ON ON 227 ON ON OFF OFF OFF ON ON ON 196 OFF OFF ON OFF OFF OFF ON ON 228 OFF OFF ON OFF OFF ON ON ON 197 ON OFF ON OFF OFF OFF ON ON 229 ON OFF ON OFF OFF ON ON ON 198 OFF ON ON OFF OFF OFF ON ON 230 OFF ON ON OFF OFF ON ON ON 199 ON ON ON OFF OFF OFF ON ON 231 ON ON ON OFF OFF ON ON ON 200 OFF OFF OFF ON OFF OFF ON ON 232 OFF OFF OFF ON OFF ON ON ON 201 193 ON OFF OFF ON OFF OFF ON ON 233 ON OFF OFF ON OFF ON ON ON 202 OFF ON OFF ON OFF OFF ON ON 234 OFF ON OFF ON OFF ON ON ON 203 ON ON OFF ON OFF OFF ON ON 235 ON ON OFF ON OFF ON ON ON 204 OFF OFF ON ON OFF OFF ON ON 236 OFF OFF ON ON OFF ON ON ON 205 ON OFF ON ON OFF OFF ON ON 237 ON OFF ON ON OFF ON ON ON 206 OFF ON ON ON OFF OFF ON ON 238 OFF ON ON ON OFF ON ON ON 207 ON ON ON ON OFF OFF ON ON 239 ON ON ON ON OFF ON ON ON 208 OFF OFF OFF OFF ON OFF ON ON 240 OFF OFF OFF OFF ON ON ON ON 209 ON OFF OFF OFF ON OFF ON ON 241 ON OFF OFF OFF ON ON ON ON 210 OFF ON OFF OFF ON OFF ON ON 242 OFF ON OFF OFF ON ON ON ON 211 ON ON OFF OFF ON OFF ON ON 243 ON ON OFF OFF ON ON ON ON 212 OFF OFF ON OFF ON OFF ON ON 244 OFF OFF ON OFF ON ON ON ON 213 ON OFF ON OFF ON OFF ON ON 245 ON OFF ON OFF ON ON ON ON 214 OFF ON ON OFF ON OFF ON ON 246 OFF ON ON OFF ON ON ON ON 215 ON ON ON OFF ON OFF ON ON 247 ON ON ON OFF ON ON ON ON 216 OFF OFF OFF ON ON OFF ON ON 248 OFF OFF OFF ON ON ON ON ON 217 ON OFF OFF ON ON OFF ON ON 249 ON OFF OFF ON ON ON ON ON 218 OFF ON OFF ON ON OFF ON ON 250 OFF ON OFF ON ON ON ON ON 219 ON ON OFF ON ON OFF ON ON 251 ON ON OFF ON ON ON ON ON 220 OFF OFF ON ON ON OFF ON ON 252 OFF OFF ON ON ON ON ON ON 221 ON OFF ON ON ON OFF ON ON 253 ON OFF ON ON ON ON ON ON 222 OFF ON ON ON ON OFF ON ON 254 OFF ON ON ON ON ON ON ON 223 255 ON ON ON ON ON ON ON ON ON ON ON ON ON OFF ON ON 0 224 OFF OFF OFF OFF OFF ON ON ON 55 OFF OFF OFF OFF OFF OFF OFF OFF HD Intelligent Network Speed Dome Installation Manual Chinese V1.0 Appendix 9 After-sale Service & Maintenance 1. Installation and service Contact our maintenance department when you have questions during installation. Barcode should be well kept for fast and convenient service. 2. Product Repair Please return the product in accordance with the relevant provisions of the transport of the product,ensure that the product suffers no damage during the way back,avoiding unnecessary disputes. Remember not to try to dismantle the cover and repair yourself to avoid electric shock or other risks.We recommend that all maintenance services done by professionals. 3. Warranty Information Warranty period:one year. The warranty card work for the products you bought from us. 1. Within warranty period,when there is breakdown under normal conditions, we will provide free repair service with the warranty card and purchase bills you have; 2. The following situations need extra pay during the warranty period: (1)Physical damage; (2)Beyond the warranty expiration date or free maintenance period; (3)Any failure or damage caused during use, maintenance or custody against the manual book; (4)Abnormal situations caused by illegal copy,non-standard,self-written or third-party software. (5)Abnormal situations caused by falling,squeezing,high temperature, corrosion,foreign objects entering,poor electrical environment or other non-normal reasons. (6)Breakdown or damage caused by natural disasters, war and other force majeure factors. (7 ) Breakdown caused by unauthorized service agencies or disassemble, repair, installation confirmed by their personnel. (8)Without company name, company address, production date, serial number, warranty card, or serial number and stickers blurred, damaged,unknown. warranty card Product name Model Purchase Date Dealer 56 HD Intelligent IP Speed Dome Installation Manual Chinese V1.0 Purchase Market Customer name Profession Telephone number Zip code Work units Current Address 1. Please send the device back with the warranty card and bill if you need Warranty and Maintenance,transportation costs are on the user. 2. Pls take care of the card for better service. 57 HD Intelligent Network Speed Dome Installation Manual English HD Intelligent Network Speed Dome Installation Manual English
advertisement
Key Features
- Integrated design, highly reliable
- IP66, TVS4000V lightning and surge protection
- Bulit-in heat balance, fog-proof
- Multi-axis design
- Support 3D positioning
- Support preset/patrol/pattern/linear scan/frame etc.
- Support title display
Frequently Answers and Questions
What are the basic requirements for installing a HD Network Speed Dome?
The basic requirements for installing a HD Network Speed Dome are: professional staff, compliance with local electrical regulations, complete accessories, a place and installation mode that meets requirements, a suitable working environment, and proper wire preparation.
How do I configure the protocol, baud rate and address of the speed dome?
You can configure the protocol, baud rate and address using the DIP switch located on the side of the speed dome.
What are the different types of alarms supported by the speed dome?
The speed dome supports 4ch alarm input and 2ch alarm output. These include motion detect, video blind, video loss, and abnormal handle.