Avtech AVX102 Hardware manual
advertisement
Hardware
379Z x902_V 0.9
379Z
Connection
DVR / NVR
Directly connect to the USB port of AVTECH DVR / DVR, and you’re ready to use this controller.
PC (with CMS Lite / Standard / Pro installed)
Open CMS Lite / Standard / Pro to connect to AVTECH DVR / NVR / IP speed dome camera.
Then, connect this controller to the USB port of your PC, wait till the system prompts for driver installation, and you’re ready to use it now.
PTZ Control Pad
Switch to a channel
(when the speed dome camera is connected to a recorder (DVR or NVR)
Press CH to enable this function (LED indicator on), and press one number key on the number pad to switch the video channel to the one with a speed dome camera connected.
Restore to multi-channel view
(when the speed dome camera is connected to a recorder (DVR or NVR)
Press 4CH / 9CH / 16CH to switch the display view to 4CH / 9CH / 16CH respectively.
Adjust camera focus
Press NEAR / FAR to manually adjust the focus of the speed dome camera.
Set a preset point
a) Move the camera view to where you want set as a preset point.
PRESET to enable this function (LED indicator on). c) Press d) Press one of the numbering on the number pad, and press ENTER to confirm.
Go to a preset point
b) Press the numbering where a preset point is defined on the number pad, and press ENTER to confirm.
Enable camera cruising
Press AUTO PAN to command the camera to pan automatically.
Press CRUISE to start moving to the points pre-defined and grouped in the camera. To know more details, please refer to the camera user manual.
Note: The following keys, C1, C2, C3, C4, FUNCTION, 6CH, 12CH, HDM02 and CLEAR are reserved for future use.
Specifications
Joystick performance
LED Indicator
Interface
Supported protocols
Buttons
Connectors
Compatibility
3-axis joystick for PTZ control
6 indicators for CH / PRESET / SEQUENCE / AUTO PAN / CRUISE / FUNCTION
USB port
Fully compliant with USB Hub Specification version 2.0 and is also backward compatible with USB Hub specification 1.1
25 dedicated buttons / 4 programmable buttons
USB Type A x 2: For mouse / USB flash drive / keyboard connection to use with DVR / NVR
USB Type B x 1: For power supply via PC / DVR / NVR
Compatible with PC, AVTECH NVR and HD CCTV DVR to control AVTECH PTZ camera
Environmental Indoor
Operating Temperature 0℃ ~ 60℃
Power
Dimensions(mm)**
Weight
Via USB interface (DC 5V) / 100mA
224.6(L) x 154.7(W) x 106.8(H)
555g
* The specifications are subject to change without notice. ** Dimensional tolerance: ±5mm x902_V 0.9
advertisement
Related manuals
advertisement