Harman Absolute43 Freestanding Pellet Stove pellet stove Owner's Manual

Harman Absolute43 Freestanding Pellet Stove pellet stove Owner's Manual

Below you will find brief information for pellet stove Absolute43 Freestanding Pellet Stove. This manual covers the basics of installing and operating the Absolute43 Freestanding Pellet Stove. You will find information on the proper clearances to combustibles, the required fuel, how to safely operate and shut down the stove and how to properly maintain your Absolute43 Freestanding Pellet Stove to ensure trouble-free operation.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Harman Absolute43 Freestanding Pellet Stove Owner's Manual | Manualzz

1

Owner’s Manual

Care and Operation

INSTALLER: Leave this manual with party responsible for use and operation.

OWNER: Retain this manual for future reference.

Contact your local dealer with questions on installation, operation or service.

NOTICE: SAVE THESE INSTRUCTIONS

Model(s):

Absolute43 Freestanding Pellet Stove

WARNING

Please read this entire manual before installation and use of this pellet fuelburning room heater.

Failure to follow these instructions could result in property damage, bodily injury or even death.

• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

• Do not overfire - If any external part starts to glow, you are overfiring. Reduce feed rate. Overfiring will void your warranty.

• Comply with all minimum clearances to combustibles as specified. Failure to comply may cause house fire.

Absolute43

Use & Care Video

!

CAUTION

Tested and approved for wood pellet fuel only. Burning of any other type of fuel voids your warranty.

!

CAUTION

Check building codes prior to installation.

• Installation MUST comply with local, regional, state and national codes and regulations.

• Contact local building or fire officials about restrictions and installation inspection requirements in your area.

WARNING

HOT SURFACES!

Glass and other surfaces are hot during operation AND cool down.

Hot glass will cause burns.

• Do not touch glass until it is cooled

• NEVER allow children to touch glass

• Keep children away

• CAREFULLY SUPERVISE children in same room as stove.

• Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other flammable materials.

• Keep clothing, furniture, draperies and other flammable materials away.

NOTE

To obtain a French translation of this manual, please contact your dealer or visit www.harmanstoves.com

Pour obtenir une traduction française de ce manuel, s’il vous plaît contacter votre revendeur ou visitez www.

harmanstoves.com

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

Read this manual before operating this appliance.

Please retain this Owner’s Manual for future reference.

Read the Installation Manual before making any installation or finishing changes.

Congratulations, The Harman reliability, and efficiency.

®

Absolute43 pellet stove you have selected is designed to provide the utmost in safety,

As the owner of a new pellet stove, you’ll want to read and carefully follow all of the instructions contained in this owner’s manual. Pay special attention to all cautions and warnings.

This owner’s manual should be retained for future reference.

We suggest that you keep it with your other important documents and product manuals.

Your new Harman

®

Absolute43 Freestanding Pellet Stove will give you years of durable use and trouble-free enjoyment.

Welcome to the Harman

®

family!

Listing Label Information/Location

The model information regarding your specific stove can be found on the rating plate usually located in the control area of the stove.

Model Name

Serial Number

Report #/Rapport #135-S-32-2

MODEL / MODÈLE: “Absolute43”

Room Heater Pellet Fuel-Burning Type

SUITABLE FOR MOBILE-HOME INSTALLATION

This pellet burning appliance has been tested and listed for use In

Manufactured Homes In accordance with OAR 814-23-900 through 814-23-909

Test to/testé à ASTM E 1509-12, ULC-S627-00,

EPA Method 28 & 5G

Room Heater, Pellet Fuel-Burning Type, Also For

Use In Mobile Homes. (UM) 84-HUD

“PREVENT HOUSE FIRES” Install and use only in accordance with manufactures installation and operation instructions.

Contact local building or fire officials about restrictions and installation inspection in your area.

WARNING: FOR MANUFACTURED HOMES:

Do not install appliance in a sleeping room. An outside combustion air inlet must be provided.

The structural integrity of the manufactured home floor, ceiling and walls must be maintained.

Refer to manufacturer’s instructions and local codes for precautions required for passing chimney through a combustible wall or ceiling.

Inspect and clean exhaust venting system frequently in accordance with manufacturer’s instructions.

Use a 3” or 4” diameter type “L” or “PL” venting system.

Do not connect this unit to a chimney flue

USA

Sides (A) 6”

Back (B) 1”

Front (C) 6”

Alcove Installation

Min. Alcove Height 42” (1067mm)

Max. Alcove Depth 24” (610mm) servicing another appliance.

Do not obstruct the space beneath the heater.

FOR USE WITH PELLETIZED WOOD FUEL

ONLY.

EPA Certified Emissions: 1.8 g/hr

Input Rating Max: 5.0 lb. fuel/hr

Electrical Rating: 240 VAC, 50 Hz, Start 1.75

AMPS, Run 1.25 AMPS

U.S. Electrical Rating: 115 VAC, 60 Hz, Start 3.5

AMPS, Run 2.5 AMPS

Fuel Type: Wood Pellet ONLY

Route power cord away from unit.

OPERATE ONLY WITH DOORS CLOSED

MINIMUM CLEARANCES TO

COMBUSTIBLES

Back Wall to Appliance

Side Wall to Appliance

Corner Installation

Walls to Appliance

2”

6"

6.25”

Use a non-combustible floor protector extending under and to the sides, front and back of the unit as shown in floor protection diagram. Measure front distance from the surface of the glass door.

Recommended: Non-combustible floor protection extended beneath the flue pipe when installed with horizontal venting.

Floor Protection*

CANADA

152 mm

25 mm

152 mm

6.25"

A

C

2"

6"

B

352 Mountain House Road, Halifax, PA 17032 (É.-U.)

DANGER: Risk of electrical shock. Disconnect power supply before servicing.

Replace glass only with 5mm ceramic available from your dealer.

For further instruction

Keep viewing and ash refer to owner’s manual.

removal doors tightly closed during operation.

3-90-777 Rev D

THIS AREA MUST

BE BLACK

EXAMPLE

Modèle: ABSOLUTE43

Appareil de chauffage à granulés de bois

CONÇU POUR MAISONS MOBILES

Test pour / tested à la norme ASTM E 1509-12, ULC-S627-00,

EPA Method 28 & 5G

Chauffe-chambre, Pellet à combustibles Type, également pour les maisons mobiles. (UM) 84-HUD

"Empêcher MAISON incendies" Installer et utiliser uniquement en conformité avec les instructions du fabricant d'installation et d'exploitation.

Contactez le service des incendies à propos des restrictions et l'inspection d'installation dans votre région.

AVERTISSEMENT: POUR maisons préfabriquées: Ne pas installer l'appareil dans une chambre à coucher. Une entrée d'air de combustion à l'extérieur doit être fournie. L'intégrité structurale de la maison étage, plafond et murs fabriqués doit

être maintenue.

Reportez-vous aux instructions du fabricant et les codes locaux pour les précautions nécessaires pour faire passer la cheminée à travers un mur ou un plafond combustible.

Inspectez et nettoyez système d'évacuation souvent en conformité avec les instructions du fabricant.

Utilisez un "ou 4" Type de diamètre «L» 3 ou le système de ventilation "PL".

Ne pas connecter cet appareil à un conduit de cheminée desservant un autre appareil.

Ne pas obstruer l'espace sous le chauffe-eau.

À UTILISER AVEC LA GRANULE DE BOIS SEULEMENT.

Émissions certifiés EPA: 1,8 g / h

Entrée Max Note: £ 5,0 carburant / h

Note électrique: 240 VAC, 50 Hz, Lancer 1,75 AMPS,

Exécuter 1,25 AMPS

US Note électrique: 115 VAC, 60 Hz, 3,5 AMPS Démarrer,

Exécuter 2,5 AMPS

Type de carburant: Bois Pellet SEULEMENT

Route cordon électrique de l'appareil.

Fonctionner uniquement avec les portes fermées

N

Serial No.

o

de série:

008

BARCODE LABEL

DANGER: Risque d’électrocution. Coupez l’alimentation électrique avant l’entretien.

Remplacer le verre avec 5 mm miroir verre votre revendeur.

En tenant la porte d’entrée et le couvercle de la trémie hermétiquement fermé pendant le fonctionnement de l’appareil

DISTANCES DE SECURITE PAR RAPPORT AUX

MATERIAUX COMBUSTIBLES

Paroi arrière à l’appareil paroi latérale de l’appareil

51 mm

152 mm

Installation en angle

Entre murs et apparell 159 mm

Installation en alcôve

Hauter minimale de l’alcôve 1067 mm

Profondeur maximale de l’alcôve 610 mm

PROTECTION DU SOL*

Côtés (A) 152 mm

Arrière (B) 25 mm

Avant (C) 152 mm

Utiliser une protection de sol non combustible sous l’appereil qui s’étend sur les côtes, l’avant et l’arrière du poêle (voir schéma). Pour la distance à l’avant, mesurer à partir de la surface de la porte en verre.

ll est recommendé que la protection s’étende jusque sous le conduit en cas d’installation d’un conduit horizontal ou sous le té en cas conduit vertical.

Do not remove this label/Ne pas enlever cette

étiquette.Made in the USA/Fabriqué aux É.-U.

US ENVIRONMENTAL PROTECTION AGENCY

Certified to comply with 2015 particulate emission standards. Not approved for sale after May 15, 2020.

Certifié conforme aux normes 2015 d’émission de particules. Non approuvé pour la vente après le 15 mai 2020.

Date of Manufacture / Date de fabrication:

2016 2017 2018 JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC

Manufactured by / Fabriqué par: Hearth and Home Technologies 352 Mountain House Road, Halifax PA 17032

ECO: 79668

PART # / REV: 3-90-777_RevD

ORIGINATOR: SpidleT

DATE: 02/16

LABEL SIZE: 13 in. x 5.75 in.

LOCATION:

LABEL TICKET

CLASS:

ADHESIVE:

MATERIAL:

INK: BLACK

468

METAL

OVERCOAT:

352 Mountain House Road

Halifax, PA 17032

Hole Size = .312 / Oblong Hole Size: .125 x .21

This unit will need the addendum label that refers to the “Wood heater needs periodic inspection”

Information

2 Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

Table of Contents

1 Product Specifications and Important Safety Information

A. Appliance Certification / Specifications . . . . . . . . . . . . . . . 4

B. Mobile Home Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

C. BTU & Efficiency Specifications . . . . . . . . . . . . . . . . . . . . . 4

D. Appliance Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

E. Clear Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

F. Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

G. Fuel Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

H. Quick Start Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

I. Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . 9

J. Cleaning Prompts, Messages and Errors. . . . . . . . . . . . . 10

2 Maintenance and Service

A. Proper Shutdown Procedure . . . . . . . . . . . . . . . . . . . . . . 11

B. Quick Reference Maintenance Chart . . . . . . . . . . . . . . . . 11

C. Burnpot Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

D. Combustion Fan Chamber . . . . . . . . . . . . . . . . . . . . . . . . 13

E. Glass Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

F. Firebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3 Reference Materials

A. Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

B. Limited Lifetime Warranty . . . . . . . . . . . . . . . . . . . . . . . . . 19

C. Loss of Power Addendum . . . . . . . . . . . . . . . . . . . . . . . . 21

D. Emergency Manual Ignition . . . . . . . . . . . . . . . . . . . . . . . 21

E. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

F. Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

= Contains updated information

• DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury.

• WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury.

• CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

• NOTICE: Used to address practices not related to personal injury.

3 Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

4

1

Product Specific and Important Safety Information

A. Appliance Certification / Specifications C. BTU & Efficiency Specifications

MODEL:

Absolute43 Pellet Stove

LABORATORY:

OMNI Test Laboratories, Inc

REPORT NO.

TYPE:

135-S-32-2

Pellet Fueled/Supplementary For

Residential Use

STANDARD(s):

ASTM E 1509-12, ULC-S627-00,

EPA Method 28 & 5G

ELECTRICAL

RATING:

115 VAC, 60 Hz, Start 4.0 Amps, Run

3.0 Amps

GLASS

SPECIFICATION: 5mm mirrored ceramic glass

EPA Certification Number:

967-14

EPA Certified Emissions:

1.8 g/hr

*LHV Tested Efficiency:

**HHV Tested Efficiency:

78%

69.3%

11,800 - 33,900

***EPA BTU Output:

****BTU Input

Vent Size:

Hopper Capacity:

Fuel

15,800 - 45,300

3 Inch

52 lbs

Wood Pellet

The Absolute43 is Certified to comply with

2015 particulate emission standards. Not approved for sale after May 15, 2020.

NOTE: This installation must conform with local codes.

In the absence of local codes you must comply with the

ASTM E 1509-04, ULC-S627-00, (UM) 84-HUD

B. Mobile Home Approval

This appliance is approved for mobile and manufactured home installations when not installed in a sleeping room and when an outside combustion air inlet is provided.

The structural integrity of the mobile home floor, ceiling, and walls must be maintained. The appliance must be properly grounded to the frame of the mobile home and use only listed pellet vent, Class “PL” or “L” connector pipe.

A Harman

®

Outside Air Kit must be installed in a mobile home installation.

!

WARNING

T H E S T R U C T U R A L I N T E G R I T Y O F T H E

MANUFACTURED HOME FLOOR, WALL, AND

CEILING/ROOF MUST BE MAINTAINED.

DO NOT INSTALL IN SLEEPING ROOM.

!

WARNING

Risk of Fire! Hearth & Home Technologies disclaims any responsibility for, and the warranty and agency listing will be voided by the below actions.

* Weighted average LHV efficiency using data collected during EPA emissions test.

**Weighted average HHV efficiency using data collected during EPA emissions test.

***A range of BTU outputs based on EPA Default Efficiency and the burn rates from the low and high EPA tests.

****Based on the maximum feed rate per hour multiplied by approximately 8600 BTU’s which is the average BTU’s from a pound of pellets.

This wood heater has a manufacturer-set minimum low burn rate that must not be altered. It is against federal regulations to alter this setting or otherwise operate this wood heater in a manner inconsistent with operating instructions in this manual.

This wood heater needs periodic inspection and repair for proper operation. It is against federal regulations to operate this wood heater in a manner inconsistent with operating instructions in this manual.

DO NOT:

• Install or operate damaged appliance

• Modify appliance

• Install other than as instructed by Hearth & Home

Technologies

• Operate the appliance without fully assembling all components

• Overfire

• Install any component not approved by Hearth &

Home Technologies

• Install parts or components not Listed or approved.

• Disable safety switches

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage.

For assistance or additional information, consult a qualified installer, service agency or your dealer.

NOTE: Hearth & Home Technologies, manufacturer of this appliance, reserves the right to alter its products, their specifications and/or price without notice.

Harman

®

is a registered trademark of Hearth & Home

Technologies.

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

5

D. Appliance Safety

(Cont.)

!

WARNING

If you expect that small children or vulnerable adults may come into contact with this appliance, the following precautions are recommended:

• Install a physical barrier such as:

- A decorative fire screen.

- Adjustable safety gate.

• Never leave children alone near a hot stove, whether operating or cooling down.

• Teach children to NEVER touch the stove.

• Consider not using the stove when children will be present.

• Use only specified components as replacement parts.

Other components may not allow your stove to operate as it was intended.

Contact your dealer for more information, or visit: www.

hpba.org/safety-information.

To prevent unintended operation when not using your stove for an extended period of time (summer months, vacations, trips, etc):

• Unplug stove from receptacle.

Due to high temperatures, this stove should be placed away from traffic, furniture and draperies.

Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burns to the skin and/or clothing.

Young children should be carefully supervised when they are in the same room as the stove.

Clothing and other flammable materials should not be placed on or near this stove.

Installation and repair of this stove should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning will be required.

It is imperative that control compartments and circulating air passageways of this stove be kept clean.

!

WARNING

THIS WOOD HEATER HAS A MANUFACTURER-SET

MINIMUM LOW BURN RATE THAT MUST NOT BE

ALTERED. IT IS AGAINST FEDERAL REGULATIONS

TO ALTER THIS SETTING OR OTHERWISE OPERATE

THIS WOOD HEATER IN A MANNER INCONSISTENT

WITH OPERATING INSTRUCTIONS IN THIS MANUAL.

E. Clear Space

!

WARNING

RISK OF FIRE! Do NOT place combustible objects

in front or to the sides of the appliance. High temperatures may ignite clothing, furniture or draperies.

NOTICE: Clearances may only be reduced by means

approved by the regulatory authority having jurisdiction.

!

WARNING

RISK OF FIRE! Keep combustible materials, gasoline and other flammable vapors and liquids clear of appliance.

• Do NOT store flammable materials in the appliance’s vicinity.

• Do NOT use gasoline, lantern fuel, kerosene, charcoal lighter fluid or similar liquids to start or “freshen up” a fire in this heater.

Keep all such liquids well away from the heater while it is in use as combustible materials may ignite.

!

WARNING

MOBILE/MANUFACTURED HOME GUIDELINES: DO

NOT ALLOW INSTALLATION IN A SLEEPING ROOM.

!

WARNING

USE OF IMPROPER FUELS, FIRESTARTERS OR

ALTERING THE STOVE FOR HIGHER HEAT OUTPUT

MAY CAUSE DAMAGE TO THE STOVE AND COULD

RESULT IN A HOUSE FIRE. USE ONLY APPROVED

FUELS AND OPERATION GUIDELINES

!

CAUTION

THE STOVE IS HOT WHILE IN OPERATION.

KEEP CHILDREN, CLOTHING AND FURNITURE AWAY.

CONTACT MAY CAUSE SKIN BURNS.

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

6

F. Helpful Hints

When operating your Harman

®

Absolute43 Pellet Stove, follow basic safety standards. Read these instructions carefully before you attempt to operate the Absolute43 Pellet

Stove. Failure to do so may result in damage to property or personal injury and may void the product warranty.

Cleaning Burn Pot: Whenever your stove is not burning, take the opportunity to scrape the burn pot to remove carbon buildup.

A vacuum cleaner is handy to remove the residue. Be sure the stove is cold if you use a vacuum.

Carbon buildup can be scraped loose with the fire burning using the special tool provided with your stove. Scrape the floor and sides of the burn pot. The carbon will be pushed out by the incoming fuel.

Always wear gloves when scraping the burnpot.

Disposal of Ashes: Ashes should be placed in a steel container with a tight fitting lid. The closed container of ashes should be placed on a non-combustible floor or on the ground, well away from all combustible materials, pending final disposal. If the ashes are disposed of by burial in soil or otherwise locally dispersed, they should be retained in the closed container until all cinders have thoroughly cooled.

Other waste shall not be placed in this container.

Soot and Flyash Formation and Need for Removal: The products of combustion will contain small particles of flyash.

The flyash will collect in the exhaust venting system and restrict the flow of the flue gases. Incomplete combustion, such as occurs during startup, shutdown, or incorrect operation of the room heater will lead to some soot formation which will collect in the exhaust venting system. The exhaust venting system should be inspected at least once every year to determine if cleaning is necessary.

When burning wood pellets on low, the potential exists for creosote to form. The venting system should be inspected periodically throughout the heating season to determine if creosote buildup has occurred. If a significant layer of creosote has accumulated (1/8” or more), it should be removed to reduce the risk of a chimney fire. If a fire occurs, call the fire department, shut down the stove, and evacuate the residence. Before using the appliance, have the venting system thoroughly inspected and replace any damaged components.

With any hearth appliance, installation of smoke detectors is recommended on every level of the home.

Possible causes of smoke detector activation:

Paint curing process - Open a window near the appliance for the first few hours of burning.

Exhaust being drawn back inside the dwelling - Outside air connection to the appliance is necessary.

Vent leakage - All interior seams and joints should be sealed with silicone where applicable. Follow vent manufacturers instructions for proper sealing.

!

CAUTION

This appliance must be vented to the outside

G. Fuel Specifications

The Absolute43 Pellet Stove is approved for burning any grade of pelletized bio-mass fuel.

It should be noted, however, that higher ash content will require more frequent cleaning.

The moisture content of pellets must not exceed 8%. Higher moisture will rob BTU’s and may not burn properly.

Fuel should not be stored within the stove installation clearances or within the space required for cleaning and ash removal.

Fuel and Fuel Storage

Pellet fuel quality can fluctuate from manufacturer to manufacturer, and even from bag to bag.

Hearth & Home Technologies recommends using only fuel that is certified by the Pellet Fuels Institute (PFI).

Fuel Material

• Made from sawdust and/or other wood by-products

• Source material typically determines ash content

Higher Ash Content Material

• Hardwoods with high mineral content

• Bark and leaves as source material

• “Standard” grade pellets and other biomass

Lower Ash Content Material

• Softwood; pine, fir, etc.

• Materials with lower mineral content

• “Premium” grade pellets

Performance

• Higher ash content requires more frequent maintenance.

• “Premium” grade pellets will produce the highest heat output.

• Burning pellets longer than 1-1/2 inches (38mm) can cause inconsistent feeding and/or ignition.

Clinkers

• Minerals and other non-combustible materials, like sand, will turn into a hard glass-like substance when heated.

• Trees from different areas will vary in mineral content.

For this reason, some fuels will produce more clinkers than others.

Moisture

• Always burn dry fuel. Burning fuel with high moisture content takes energy to dry and tends to cool the appliance thus, robbing heat from your home.

• Damp pellet fuel could turn back into sawdust which does not flow properly through the feed system.

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

G. Fuel Specifications

(Cont.)

Storage

• Wood pellets should be left in their original sealed bag until ready to use, to prevent moisture.

• Do not store fuel within the specified clearance areas, or in a location that will interfere with routine cleaning and maintenance procedures.

NOTICE

Hearth & Home Technologies is not responsible for stove performance or extra maintenance required as a result of using fuel with higher ash or mineral content.

!

CAUTION

Do not burn fuel that contains an additive.

• May cause hopper fire

• Damage to product may result

Read the list of ingredients on the packaging.

!

CAUTION

Tested and approved for use with wood pellets ONLY.

Burning of any other fuel will void your warranty.

!

WARNING

BURNING COLORED PAPER, CARDBOARD,

SOLVENTS, TRASH AND GARBAGE OR ALTERING

THE STOVE FOR HIGHER HEAT OUTPUT MAY CAUSE

DAMAGE TO THE STOVE AND COULD RESULT IN

A HOUSE FIRE. USE ONLY APPROVED FUELS AND

FOLLOW ONLY THESE OPERATION GUIDELINES.

!

WARNING

NEVER USE GASOLINE, GASOLINE-TYPE LANTERN

FUEL, KEROSENE, CHARCOAL LIGHTER FLUID, OR

SIMILAR LIQUIDS TO START OR 'FRESHEN UP' A FIRE

IN THIS HEATER. KEEP ALL SUCH LIQUIDS WELL

AWAY FROM THE HEATER, WHILE IN USE.

!

WARNING

Tested and approved for use with wood pellets ONLY.

Burning of any other fuel will void your warranty.

7 Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

H. Quick Start Guide

Initial start-up Only

1. Select Language

2. Fill hopper with pellets

3. Adjust arrows to set room desired temperature.

8

4. Touch the On/Off Power Icon.

Refer to Touch Manual for all other operations.

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

I. Frequently Asked Questions

With proper installation, operation, and maintenance your appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a qualified service person in the diagnosis of a problem and the corrective action to be taken.

Contact your dealer for additional information regarding operation and troubleshooting. Visit www.harmanstoves.

com to find a dealer.

ISSUES

Metallic noise.

White ash buildup on glass.

Glass has buildup of black soot

Glass has turned dirty.

Fire has tall flames with black tails and is lazy.

SOLUTIONS

Noise is caused by metal expanding and contracting as it heats up and cools down, similar to the sound produced by a furnace or heating duct. This noise does not affect the operation or longevity of your appliance.

This is normal. Clean the glass using any non-abrasive glass cleaner.

Excessive build-up of ash. The lower burn settings will produce more ash, the higher burn settings produce less.

The more it burns on low the more frequent cleaning of the glass is required.

Excessive build up of ash. The lower burn settings will produce more ash, the higher burn settings produce less.

The more it burns on low the more frequent cleaning of the glass is required.

The feed rate needs to be reduced or the burnpot needs cleaning. Heat exchanger or exhaust blower needs cleaning.

Smoky start-up or puffs of smoke from the airwash.

Burnpot may be dirty, Clean the burnpot.

Large flame at start-up.

Missed Ignition

This is normal. Flame will settle down once the fire is established.

Ensure pellets in burnpot

Ensure holes in burnpot are clear of obstructions above the igniter. See Burnpot Maintenance.

Check to see if the ignitor is getting hot, if not replace ignitor. *See addendum for manual ignition instructions for emergency heating needs.

9 Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

J. Cleaning Prompts, Messages and Errors

Your EASY Touch Control communicates with you by showing messages on the top center of the EASY Touch Control home screen. If you have more than one message, the messages will show consecutively until you acknowledge the message by performing the task. These communications include:

When prompted, scrape burnpot. Press checkmark to reset.

When prompted, inspect and empty ash pan as needed.

Press checkmark to reset.

When prompted, inspect and perform total clean. Press checkmark to reset.

Press checkmark if you filled the hopper. If you did not fill hopper, The message will disappear in 30 seconds.

Replace the 2 “AA” batteries in the Wireless Remote Sensor.

If Wireless Remote Sensor batteries die, the Back Up

Sensor will continue to heat your home.

Check and close the front and ash doors for the stove to continue to heat.

Close the hopper lid for the stove to continue to heat.

Fill the hopper with pellets. Press checkmark to reset. If you did not fill the hopper, the message will stop after 30 seconds. This error only appears if “Show Fuel Gauges” is turned on.

Batteries in Wireless Remote Sensor have expired. Replace the 2 “AA” batteries.

Return Air Sensor has failed. Call your Harman Dealer.

Unit has failed to ignite. Scrape the burnpot. Call your

Harman Dealer if problem persists.

Touch Control has lost communication to the stove. Call your Harman Dealer.

Exhaust Sensing Probe (ESP) as failed. Clean the ESP. If issue persists, call your Harman Dealer.

Clean your stove. Call your Harman Dealer if problem persists.

10 Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

11

2

Maintenance & Service

When properly maintained, your stove will give you many years of trouble-free service. Contact your dealer to answer questions regarding proper operation, trouble-shooting and service for your appliance. Visit www.harmanstoves.com to find a dealer. We recommend annual service by a qualified service technician.

NOTICE

The type of fuel you are burning will dictate how often you have to clean your burnpot. Clean more frequently if you encounter heavy build-up of ash at the recommended interval or you see soot coming from the vent.

Not properly cleaning your appliance on a regular basis will void your warranty.

A. Proper Shutdown Procedure

!

CAUTION

Shock and Smoke Hazard

• Turn unit to the off position, let appliance completely cool and combustion fan must be off.

Now you can unplug appliance before servicing.

• Smoke spillage into room can occur if appliance is not cool before unplugging.

• Risk of shock if appliance not unplugged before servicing appliance.

Follow the detailed instructions found in this section for each step listed in the chart below.

B. Quick Reference Maintenance Chart

Ash Pan

Cleaning or Inspection

Frequency

Every 5 bags of fuel depending on the fuel type or ash build-up

Ash Removal from Firebox

Heat Exchanger

Fan, Combustion (Exhaust)

Fan, Distribution

Door Gasket Inspection

Exhaust Path

Every 5 bags or more frequently depending on the fuel type or ash build-up

Every 1 ton of fuel

More frequently depending on the fuel type

Every 25 bags or more frequently depending on the fuel type

Prior to heating season

More frequently depending on ash build-up

Firebox - Prepare for Non-Burn Season At end of heating season

Burnpot - Burning pellets - hardwood Every 3 bags

Burnpot - Burning pellets - softwood

Glass

Hopper / Hopper Lid Gasket

Venting System

Every 5 bags

When clear view of burnpot becomes obscure

Every 50 bags of fuel or when changing fuel types

More frequently depending on the fuel type

OR

OR

OR

OR

OR

OR

OR

OR

OR

OR

OR

OR

OR

Daily Weekly Monthly Yearly

X

X

X

X

X

X

X

X

X

X

X

X

X

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

C. Burnpot Maintenance

Flame Enhancer

Figure 2.1

Pull up on the cover handle to gain access to the igniter

Figure 2.2

Viewed from below through the ash pan opening.

Igniter Cradle

Remove Flame Enhancer

Weekly or when adding fuel, take the opportunity to clean the burn pot.

(Weekly at minimum)

• Pull the flame enhancer forward to access the grate surface and pull any ashes from in front of the fire using the burn pot scraper allowing it into the ash pan.

• Scrape the grate surface downward, toward the auger.

Figure 2.1. Any carbon deposits loosened at this time will be pushed out as new fuel is fed in.

Monthly, or after each ton of fuel burned:

After burning approximately 1 ton of pellets, a more thorough cleaning is required to keep your stove running efficiently.

When the stove has completely cooled and stopped running, it’s now safe to clean.

• Shut down the stove.

• Unplug the power cord from the outlet.

• Pull up on cover handle to gain access to igniter element and cradle. Figure 2.2.

• Using the brush supplied, brush the igniter element free of any ash or debris. Figure 2.2.

The burnpot grate can be removed if needed. Figure 2.3.

• Remove the flame Enhancer by pulling straight up removing tabs from burn pot sides.

• Remove the (2) 1/2” allen head bolts from each side of the burn pot.

• Slide the grate toward you to remove.

NOTE: the grate does not need to be removed to properly clean the igniter. This part is removable for part(s) replacement only.

!

DANGER

Disconnect the power to the unit before removing cover.

!

CAUTION

When cleaning burn pot clean-out chamber. Do not damage the high temperature igniter wires.

(2) 1/2” Allen head bolts

Brush ash and debris from

Igniter Element.

12

Figure 2.3

Igniter Cradle and Element

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

D. Combustion Fan Chamber

Monthly Cleaning- continued:

The combustion inlet cover is located behind the ash pan that must be removed to properly clean the combustion fan blade. Figure 2.4.

• Remove combustion inlet cover by pulling up on cover.

This allows access to the combustion fan blade and exhaust path. Figure 2.4.

• Remove any flyash or debris that has collected around combustion fan blade with the provided paint brush.

• Clean exhaust passage.

NOTE: The ESP Sensor is located just inside the exhaust passage. Be sure not to damage the ESP Sensor while cleaning the exhaust passage.

• Once cleaned replace combustion inlet cover and ashpan.

Glass - Replacement (Cont.)

Carefully remove damaged glass, gasket material, and hold down clips (set aside).

Install the self adhesive 1/4” gasket material around the front face of the glass. Set the glass panel and gasket gently onto the door. Install the hold down clips and tighten with bolts.

Be sure to keep firing and de-ashing doors closed and insure all seals are maintained and are in good condition

Replace glass only with high temperature mirrored ceramic glass.

Combustion Inlet Cover

Combustion Fan Blade

Figure 2.4

Exhaust Passage

E. Glass Maintenance

The glass used in your stove is manufactured to exact standards to withstand the high heat of the fire, but like all glass, it must be treated with common sense and care. Never abuse the glass by slamming the door shut or striking the glass with a heavy object.

If the glass is broken or damaged, do not operate the stove until it has been replaced.

Glass - Cleaning

It will be necessary to clean accumulated ash from the glass surface; allowing this ash to remain on the glass for long periods can result in “etching” due to the acidity of the ash. Never clean the glass while it is hot, and

do not use abrasive substances. Wash the surface with cool water, and rinse thoroughly. You may wish to use a non-abrasive cleaner specifically designed for use on stove glass. In any case, dry thoroughly before relighting your stove.

Glass - Replacement

If the stove’s glass is cracked or broken, you must replace it before operating your stove. Remove pieces carefully. Replace glass only with Harman

®

replacement glass;

do not use substitutes.

Glass Gasket

Inspect door gasket during cleaning and inspection

F. Firebox

Yearly Cleaning:

Remove flyash and carbon buildup from the smooth surfaces of the heat exchanger as well as other surfaces inside the firebox. Figure 2.7.

Figure 2.7

Scrape these areas free of flyash or carbon buildup

13 Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

3

Reference Material

A. Service Parts

Service Parts

Absolute 43

Pellet Stove

1-90-777000-1 (Black)

Beginning Manufacturing Date: March 2015

Ending Manufacturing Date: Active

1-90-777000-14 (Majolica Brown)

30

29

9

8

7

6

5

4

3

2

1

31

24

20

25

23

22

21

28

27

26

12

11

13

14

15

10

16

17

19

18

14

Part number list on following page.

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16

02/16

3-90-777000

Service Parts

Absolute 43

Beginning Manufacturing Date: March 2015

Ending Manufacturing Date: Active

IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or distributor.

Hearth and Home Technologies does not sell directly to consum-

ers. Provide model number and serial number when requesting service parts from your dealer or distributor.

COMMENTS ITEM

1

2

3

4

5

DESCRIPTION

Touch Control

16 X 8 Hopper Lid Glass

Screwposts/Washers

Gasket 3/8 X 1/2

Black Plated Knob w/Screw

Complete Latch

5/16 X 1/2 Ball Plunger

Bulk 5/16 Push Retainer

Hopper Lid Hinge w/Hardware

Hopper Lid Hinge Pin Plates w/Hardware

Pkg of 20 Sets

20 Feet

2 Sets

Pkg of 3

Pkg of 100

6 Cast Top

1 Set

Black

Majolica Brown

7 Hopper Assembly

Gasket Hopper Throat

Gasket 3/8 X 1/2

8 Left Side Cast

20 Feet

Black

Majolica Brown

9

10

Combustion Blower Capacitor

Smoke Shield

PART NUMBER

1-00-777552

3-40-777770

1-00-129004

1-00-375501

1-00-02000-1

1-00-0669697

3-31-5500-3

3-31-94807-100

1-00-777771

1-00-777560

4-00-247236S

1-00-247236-14

1-10-777611A

3-44-677185

1-00-375501

4-00-777645P

1-00-777645-14

3-20-00276

1-00-777593

Stocked at

Depot

Y

Y

Y

Y

Y

Y

Y

Y

Y

#11 Load Door

11.2

11.1

11.3

11.4

11.5

11.6

11.7

11.8

15

11

11.1

Load Door

Cast Latch, Knob & Screw

Wood Handle

Load Door Rope 11.2

11.3

11.4

11.5

11.6

11.7

Latch Bracket w/Hardware

Rollers & Hardware

Gasket 1/4 RD PSA

Glass w/Gasket

Glass Clips w/Hardware

Load Door Hinge w/Hardware

11.8

Gasket 1/2” RD LD

Additional service parts on following page.

Black

Majolica Brown

1 Set

1 Set

15 Feet

1 Set

20 Feet

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16

1-00-0119

3-40-00247

4-00-777565P

1-00-777565-14

1-00-777665

1-00-77753

1-00-2312

1-00-777000

1-00-777619

1-00-777610

1-00-1086204

3-90-777000

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Service Parts

Absolute 43

Beginning Manufacturing Date: March 2015

Ending Manufacturing Date: Active

IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or distributor.

Hearth and Home Technologies does not sell directly to consum-

ers. Provide model number and serial number when requesting service parts from your dealer or distributor.

ITEM

12

13

Burn Pot Scraper

Ashlip

DESCRIPTION COMMENTS

Pkg of 10

Black

Majolica Brown

14

15

16

Ash Door, Complete

Gasket 1/2” RD LD

Ash Door Handle Assembly

Rollers & Hardware

Ash Pan

20 Feet

1 Set

1 Set

#17 Burn Pot Assembly

17.3

17.2

17.4

PART NUMBER

2-00-777692-10

3-00-777644P

1-00-777644-14

1-10-777570A

1-00-1086204

1-00-777149

1-00-77723

1-10-777604A

17.1

17.5

Stocked at

Depot

Y

Y

Y

Y

17.6

17

17.1

17.2

17.3

17.4

17.5

17.6

18

Burn Pot Assembly

Burn Pot Weldment

Gasket

Swing Plate & Flame Guide

Igniter w/Bracket

Igniter Bracket Front

Burn Pot Grate

Burn Pot Clean Out w/Hardware

1/4/-20x5/8

Leg Leveling Kit

Leg w/Hardware

19

20 Right Side Cast

21

22

Combustion Blower

Fan Blade

Pound In Stud 6-32 X 1 1/4

Gasket, Burn Pot / Tailpipe

23

24

Pellet Tailpipe, Cast

Power Cord

25 Gasket, Burn Pot / Tailpipe

Additional service parts on following page.

16

1 Set

Pkg of 5

Pkg of 10

1 Set

Black

Majolica Brown

Black

Majolica Brown

Pkg of 30

Pkg of 5

Pkg of 5

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16

1-10-777801A

3-44-724114

1-00-777818

1-00-777200

1-00-777815

1-00-777800

1-00-777824

3-31-782108-10

1-00-12302

1-00-249100

1-00-249100-14

4-00-777646P

1-00-777646-14

1-00-02275

1-10-574500A

1-00-53463220

1-00-07381

3-00-247237

3-20-51578

1-00-07381

Y

Y

Y

Y

Y

Y

3-90-777000

Y

Y

Y

Y

Y

Y

Y

Y

Y

Service Parts

Absolute 43

Beginning Manufacturing Date: March 2015

Ending Manufacturing Date: Active

IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or distributor.

Hearth and Home Technologies does not sell directly to consum-

ers. Provide model number and serial number when requesting service parts from your dealer or distributor.

COMMENTS ITEM

26

27

28

29

30

DESCRIPTION

ESP Probe-Red/Red

Distribution Blower, 100CFM

Rear Cover, Left

Differential Switch

Tubing, 1/8 Silicone

Rear Cover, Right

Qty 2 req

5 Feet

#31 Feeder Assembly

31.1

31.13

31.12

PART NUMBER

3-20-00844

3-21-07775

1-00-777615

3-20-6866

1-00-5113574

1-00-777613

Stocked at

Depot

Y

Y

Y

Y

Y

Y

31.2

31.11

31.10

31.3

31.9

31.5

31.4

31.6

31.7

31

31.1

31.2

31.3

31.4

Feeder Assembly

Feeder Body

Slide Plate Assembly

Feed Cover & Gasket

Pusher Arm

Pillow Block

31.5

31.6

31.7

31.8

31.9

Auger

Bearing Retainer w/Hardware

Cam Bearing

Cam Block Assembly

4 RPM CW Outboard Motor, 120V

Motor Mount w/Hardware

31.10

Feeder Crossover Tube Kit

31.11

Gasket, Snout

31.12

Air Intake

31.13

Gasket, Air Intake

Additional service parts on following page.

17

2 Sets

Pkg of 4

Pkg of 10

Pgk of 6

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16

31.8

1-10-777513A

1-10-777690A

1-00-677122

1-10-677187W

3-31-3614087-4

3-50-00565

1-00-04035

3-31-3014

1-10-777620A

3-20-00677

1-00-777598

1-00-67900

3-44-677160-10

1-10-06810A

3-44-72224-6

3-90-777000

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Service Parts

Absolute 43

Beginning Manufacturing Date: March 2015

Ending Manufacturing Date: Active

IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or distributor.

Hearth and Home Technologies does not sell directly to consum-

ers. Provide model number and serial number when requesting service parts from your dealer or distributor.

ITEM

5A Ceramic Fuse

Communication Cable

Draft Meter Assembly

Draft Meter Bolt & Tube

DESCRIPTION

External Temp Extension

Flue Tube Cleaning Brush

Heat Shield

Inlet Cover

Power Entry Module

Power Board

Return Air Sensor

Thermostat Extension

COMMENTS

Pkg of 5

Touch Up Paint

Black

Majolica Brown

Wiring Harness, 120V / 60HZ

PART NUMBER

1-00-05237

3-20-72662

1-00-00637

1-00-04004

3-20-70607

3-40-00126

1-00-777686

1-00-777607

3-20-803744

1-00-05372

3-20-08780

3-20-00607

3-42-19905

1-00-0014

3-20-08777

Stocked at

Depot

Y

Y

Y

Y

Y

Y

Y

Y

Y

18 Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

B. Limited Lifetime Warranty

Hearth & Home Technologies

LIMITED LIFETIME WARRANTY

Hearth & Home Technologies, on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased from an HHT authorized dealer.

WARRANTY COVERAGE:

HHT warrants to the original owner of the HHT appliance at the site of installation, and to any transferee taking ownership of the appliance at the site of installation within two years following the date of original purchase, that the HHT appliance will be free from defects in materials and workmanship at the time of manufacture. After installation, if covered components manufactured by HHT are found to be defective in materials or workmanship during the applicable warranty period,

HHT will, at its option, repair or replace the covered components. HHT, at its own discretion, may fully discharge all of its obligations under such warranties by replacing the product itself or refunding the verified purchase price of the product itself. The maximum amount recoverable under this warranty is limited to the purchase price of the product. This warranty is subject to conditions, exclusions and limitations as described below.

WARRANTY PERIOD:

Warranty coverage begins on the date of original purchase. In the case of new home construction, warranty coverage begins on the date of first occupancy of the dwelling or six months after the sale of the product by an independent, authorized HHT dealer/ distributor, whichever occurs earlier. The warranty shall commence no later than 24 months following the date of product shipment from HHT, regardless of the installation or occupancy date. The warranty period for parts and labor for covered components is produced in the following table.

The term “Limited Lifetime” in the table below is defined as: 20 years from the beginning date of warranty coverage for gas appliances, and 10 years from the beginning date of warranty coverage for wood, pellet, and coal appliances. These time periods reflect the minimum expected useful lives of the designated components under normal operating conditions.

Warranty Period

Parts Labor

1 Year

2 years

3 years

5 years 1 year

7 years 3 years

10 years

1 year

Limited

Lifetime 3 years

90 Days

19

4021-645F 02-18-13

Gas

HHT Manufactured Appliances and Venting

Wood Pellet

EPA

Wood

Coal Electric Venting

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X X

Components Covered

All parts and material except as covered by Conditions,

Exclusions, and Limitations listed

Igniters, electronic components, and glass

Factory-installed blowers

Molded refractory panels

Firepots and burnpots

Castings and baffles

Manifold tubes,

HHT chimney and termination

Burners, logs and refractory

X

X

X

X

X

X

X

X

X

X X X

See conditions, exclusions, and limitations on next page.

Firebox and heat exchanger

All replacement parts beyond warranty period

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16

Page 1 of 2

3-90-777000

B. Limited Lifetime Warranty (continued)

WARRANTY CONDITIONS:

• This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor. A list of

HHT authorized dealers is available on the HHT branded websites.

• This warranty is only valid while the HHT appliance remains at the site of original installation.

• This warranty is only valid in the country in which the HHT authorized dealer or distributor that sold the appliance resides.

• Contact your installing dealer for warranty service. If the installing dealer is unable to provide necessary parts, contact the nearest HHT authorized dealer or supplier. Additional service fees may apply if you are seeking warranty service from a dealer other than the dealer from whom you originally purchased the product.

• Check with your dealer in advance for any costs to you when arranging a warranty call. Travel and shipping charges for parts are not covered by this warranty.

WARRANTY EXCLUSIONS:

This warranty does not cover the following:

• Changes in surface finishes as a result of normal use. As a heating appliance, some changes in color of interior and exterior surface finishes may occur. This is not a flaw and is not covered under warranty.

• Damage to printed, plated, or enameled surfaces caused by fingerprints, accidents, misuse, scratches, melted items, or other external sources and residues left on the plated surfaces from the use of abrasive cleaners or polishes.

• Repair or replacement of parts that are subject to normal wear and tear during the warranty period. These parts include: paint, wood, pellet and coal gaskets, firebricks, grates, flame guides, batteries and the discoloration of glass.

• Minor expansion, contraction, or movement of certain parts causing noise. These conditions are normal and complaints related to this noise are not covered by this warranty.

• Damages resulting from: (1) failure to install, operate, or maintain the appliance in accordance with the installation instructions, operating instructions, and listing agent identification label furnished with the appliance; (2) failure to install the appliance in accordance with local building codes; (3) shipping or improper handling; (4) improper operation, abuse, misuse, continued operation with damaged, corroded or failed components, accident, or improperly/ incorrectly performed repairs; (5) environmental conditions, inadequate ventilation, negative pressure, or drafting caused by tightly sealed constructions, insufficient make-up air supply, or handling devices such as exhaust fans or forced air furnaces or other such causes; (6) use of fuels other than those specified in the operating instructions; (7) installation or use of components not supplied with the appliance or any other components not expressly authorized and approved by HHT; (8) modification of the appliance not expressly authorized and approved by HHT in writing; and/or (9) interruptions or fluctuations of electrical power supply to the appliance.

• Non-HHT venting components, hearth components or other accessories used in conjunction with the appliance.

• Any part of a pre-existing fireplace system in which an insert or a decorative gas appliance is installed.

• HHT’s obligation under this warranty does not extend to the appliance’s capability to heat the desired space. Information is provided to assist the consumer and the dealer in selecting the proper appliance for the application. Consideration must be given to appliance location and configuration, environmental conditions, insulation and air tightness of the structure.

This warranty is void if:

• The appliance has been over-fired or operated in atmospheres contaminated by chlorine, fluorine, or other damaging chemicals. Over-firing can be identified by, but not limited to, warped plates or tubes, rust colored cast iron, bubbling, cracking and discoloration of steel or enamel finishes.

• The appliance is subjected to prolonged periods of dampness or condensation.

• There is any damage to the appliance or other components due to water or weather damage which is the result of, but not limited to, improper chimney or venting installation.

LIMITATIONS OF LIABILITY:

• The owner’s exclusive remedy and HHT’s sole obligation under this warranty, under any other warranty, express or implied, or in contract, tort or otherwise, shall be limited to replacement, repair, or refund, as specified above. In no event will HHT be liable for any incidental or consequential damages caused by defects in the appliance. Some states do not allow exclusions or limitation of incidental or consequential damages, so these limitations may not apply to you.

This warranty gives you specific rights; you may also have other rights, which vary from state to state. EXCEPT TO

THE EXTENT PROVIDED BY LAW, HHT MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY

SPECIFIED HEREIN. THE DURATION OF ANY IMPLIED WARRANTY IS LIMITED TO DURATION OF THE

EXPRESSED WARRANTY SPECIFIED ABOVE.

4021-645F 02-18-13

20 Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16

Page 2 of 2

3-90-777000

C. Loss of Power

Minimizing Smoke During Loss of Power Using Battery

Back-up

Harman® strongly recommends installing battery backup to minimize entry of smoke into the room in the event of power loss.

Your pellet/biomass burning appliance relies on a combustion blower to remove exhaust. A power failure will cause the combustion blower to stop. This may lead to exhaust seeping into the room. Vertical rise in the venting may provide natural draft. It is, however, no guarantee against leakage.

There are two Harman® approved battery back-up options for your appliance:

Uninterruptible Power Supply UPS battery back-ups are available online or at computer and office equipment stores.

Your Harman® appliance with Rev E or later software available beginning in November 2010 may be plugged directly into a Harman® approved UPS:

• The APC (American Power Conversion) model

#BE750G and the TrippLite model INTERNET750U are tested and approved. Other brands or models may not be compatible.

When power is lost, a fully charged UPS will power a safe, combustion blower only shut-down. Your appliance will pulse the blower every few seconds to clear exhaust until the fire is out.

NOTE: The UPS provides safe shut-down only. It is not intended for continued operation.

• The Surefire 512 connects to a 12 volt deep cycle battery that will run your appliance for up to eight (8) hours. It includes a trickle charge feature that keeps your battery charged when power is available. NOTE: If the power is out for longer than battery life, smoke leakage may still occur unless your stove has been safely shut down.

Your appliance will recognize when power is restored. What happens depends on ESP temperature and whether it is equipped with automatic ignition:

In “Automatic” Mode, units equipped with automatic ignition will respond to the set point and ESP temperature and resume normal operation.

In “Idle” Mode, or for units without automatic ignition:

• If the ESP is cool, the appliance will remain shut down.

• If the fire is out and the ESP is still warm, the feeder may restart. Since the fire is out, the ESP temperature will not rise. The unit will then shut-down, and may flash a six-blink status error. (See ESP error codes)

• If the fire is still burning, it will resume normal operation.

Contact your dealer if you have questions about UPS compatibility with your appliance.

!

WARNING

Use only Harman

®

approved battery back-up devices.

Other products may not operate properly, can create unsafe conditions or damage your appliance.

Always keep appliance doors and hopper lid closed and latched during operation and during power failures to minimize risk of smoke or burn-back.

D. Emergency Manual Ignition

Harman

®

pellet stoves and inserts should be lit using the automatic ignition system. This is the safest and most reliable way for igniting the unit. In the event the automatic igniter is not functioning, the steps below may be followed to manually light the stove or insert in the “Constant Burn” mode. Manual lighting is for emergency purposes only, and the igniter should be repaired or replaced as soon as practical.

!

!

CAUTION

WARNING

Only use firestarter commercially marketed for pellet stoves and inserts, including wax coated wood chips, pellet starter gel and pellet igniter blocks. Use of any other type of firestarter is prohibited.

To avoid serious injury or death read and follow manufacturer’s warning and instructions for use of firestarter.

Use of firestarter is only permitted when performing a cold start.

Never attempt to manually light a stove or insert that has been operated recently and is not at room temperature.

If automatic ignition was attempted, be sure to give the stove or insert at least 30 minutes or longer to cool to room temperature.

Be sure that the stove or insert is in the “Igniter - Disabled” mode of operation.

Once all the precautions have been taken, follow these steps:

1. On the touch control, select the Burn Mode icon then select “Constant Burn”.

2. Arrow back and select the Igniter icon then select “Manual” for the ignition method. Select the Home Icon to go back to the Main Menu.

3. Fill burn pot with pellets, only half way. (Do Not Over Fill).

4. Add firestarter to pellets following manufacturer’s instructions.

5. Light pellet gel with a match, and close the door, touch the On/Off icon on the home screen. Operation will begin when the fire reaches the proper temperature.

21 Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

E. Troubleshooting

Stove does not feed

ISSUES

Partially burned pellets

Smoke smell

Fire has gone out

Smoke is visible coming out of vent

Low heat output

SOLUTIONS

• No fuel in hopper.

• Firebox draft may be too low for sensing switch in feeder circuit to operate.

Check for closed doors, loose or missing gasket on doors or hopper lid.

• Feed motor will not run until the ESP control senses a certain temperature. Maybe you did not put enough fuel or starting gel in the burn pot before manually lighting the fire

(In Constant Burn, Manual Light Only.)

• Restriction in the hopper or feeder. Remove all fuel and examine. Clear the obstruction.

• Feed motor has failed.

• Feed rate too high.

• Poor air to fuel mixture. (Check burn pot clean-out cover and air intake).

• Burn pot may need to be cleaned.

• Combination of all the above.

Seal the vent pipe joints and connection to stove with silicone.

The exhaust vent is the only part of the system that is under positive pressure.

• No fuel in hopper.

• Draft is too low, blocked flue.

• Something is restricting fuel flow.

• Hopper lid not closed properly.

• Feed motor or combustion fan has failed.

• Air-fuel ratio is too rich.

- Feed rate too high.

- Draft too low caused by a gasket leak.

• Feed rate too low

• Draft too low because of gasket leak.

• Poor quality or damp pellets

• Combination of 1 and 2.

22 Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

23 Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

F. Contact Information

a brand of

Hearth & Home Technologies

352 Mountain House Road, Halifax, PA 17032 www.harmanstoves.com

Please contact your Harman

®

dealer with any questions or concerns.

For the location of your nearest Harman

®

dealer, please visit www.harmanstoves.com.

- NOTES -

________________________________________________________________________________

________________________________________________________________________________

________________________________________________________________________________

________________________________________________________________________________

________________________________________________________________________________

________________________________________________________________________________

________________________________________________________________________________

________________________________________________________________________________

________________________________________________________________________________

• Important operating and maintenance instructions included.

NOTICE

DO NOT DISCARD THIS MANUAL

• Read, understand and follow these instructions for safe installation and operation.

• Leave this manual with party responsible for use and operation.

24

Printed in U.S.A.

Harman® • Absolute43 Owner’s Manual_R12 • 2015 -___ • 02/16 3-90-777000

advertisement

Key Features

  • EPA certified emissions
  • Mobile home approved
  • EasyTouch controls
  • High efficiency
  • Safe and reliable
  • Quiet operation

Frequently Answers and Questions

What type of fuel should I use in my Absolute43 Freestanding Pellet Stove?
The Absolute43 Freestanding Pellet Stove is approved for burning any grade of pelletized bio-mass fuel. However, higher ash content will require more frequent cleaning. The moisture content of pellets must not exceed 8%. Higher moisture will rob BTU's and may not burn properly.
How often should I clean my Absolute43 Freestanding Pellet Stove?
The type of fuel you are burning will dictate how often you have to clean your burnpot. Clean more frequently if you encounter heavy build-up of ash at the recommended interval or you see soot coming from the vent. Not properly cleaning your appliance on a regular basis will void your warranty.
What are the minimum clearances to combustibles for the Absolute43 Freestanding Pellet Stove?
The minimum clearances to combustibles for the Absolute43 Freestanding Pellet Stove are as follows: Back Wall to Appliance 2”, Side Wall to Appliance 6”, Corner Installation Walls to Appliance 6.25”. Refer to the owner's manual for more information.
Is the Absolute43 Freestanding Pellet Stove approved for mobile home installations?
Yes, the Absolute43 Freestanding Pellet Stove is approved for mobile home installations when not installed in a sleeping room and when an outside combustion air inlet is provided.
What are the safety precautions I should take when operating my Absolute43 Freestanding Pellet Stove?
Always follow basic safety standards. Read the instructions carefully before operating the stove. Failure to do so may result in damage to property or personal injury and may void the product warranty. Never leave children alone near a hot stove, whether operating or cooling down. Teach children to NEVER touch the stove. Consider not using the stove when children will be present. Use only specified components as replacement parts.

Related manuals

Download PDF

advertisement