Bosch VDN-276, VDC-275 indoor dome camera Installation Manual
Below you will find brief information for indoor dome camera VDC-275, indoor dome camera VDN-276. The Bosch VDC-275 and VDN-276 indoor dome cameras offer excellent resolution in variable lighting conditions. The cameras are ideal for demanding scene conditions and the Day/Night feature ensures the highest image quality possible at any time. The cameras are easy to install and can be adjusted around 3 axes.
advertisement
Indoor Dome Camera
VDC-275 / VDN-276
en
Installation Manual
Table of Contents
Safety
Important safety instructions
UL certification
Introduction
Unpacking
Camera controls
Monitoring and switches
Parts
Camera mounting
Connections
Adjusting the camera
Camera menus
Main SETUP menu
Lens menu
White balance menu
Table of Contents | en
3
| |
4
en | Table of Contents
6.7
6.8
6.9
6.10
6.10.1
6.10.2
6.10.3
6.11
6.12
6.13
6.14
6.15
6.16
6.17
6.18
6.19
6.20
6.4.7
6.5
6.6
ATW (auto trace white balance)
Push lock (hold)
Backlight
Picture adjustment menu
ATR menu (digital WDR)
Motion detection menu
Privacy menu
Day /Night menu
Auto
Color
B/W
NR (noise reduction) menu
Camera ID menu
Synchronisation menu
Language
Camera reset
Return
Next
Save all
Exit
White pixel menu
| |
29
30
30
31
32
32
32
26
27
28
29
29
32
32
33
33
33
25
25
26
Indoor Dome Camera
1 Safety
1.1
Safety | en
5
Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of damage to the unit.
CAUTION!
The Low Voltage power supply unit must comply with EN60950
/ UL60065. The power supply must be a SELV-LPS unit or a
SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power
Source).
CAUTION!
Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes.
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
6
en | Safety
1.2
Indoor Dome Camera
Important safety instructions
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.
Do not install unit near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a grounding prong. The wide blade and third prong are provided for your safety. I the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera Safety | en
7
WARNING!
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
CAUTION!
Apparatus shall not be exposed to dripping or spashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
8
en | Safety
1.3
Indoor Dome Camera
FCC & ICES compliance
FCC & ICES Information
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and receiver;
– connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician for help.
Intentional or unintentional modifications, not expressly approved by the party responsible for compliance, shall not be made. Any such modifications could void the user's authority to operate the equipment. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action.
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
1.4
UL certification
Safety | en
9
Disclaimer
Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Information
Technology Equipment, UL 60065. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.
Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products. Please dispose of these units at an environmentally compatible recycling facility, per European
Directive 2002/96/EC
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
10
en | Safety
1.5
Indoor Dome Camera
Bosch notices
Optical elements
Optical elements are sensitive and should be protected at all times. Do not allow objects to come into contact with glass surfaces and do not touch optical elements with your fingers.
Copyright
This manual is the intellectual property of Bosch Security
Systems and is protected by copyright.
All rights reserved.
Trademarks
All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
Note
This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described.
More information
For more information please contact the nearest Bosch Security
Systems location or visit www.boschsecurity.com
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
2 Introduction
Introduction | en
11
These indoor domes are compact, stylish surveillance cameras that offer excellent resolution in variable lighting conditions.
The high performance 1/3 inch CCD provides a resolution of
650 TVL. The dome is available in two versions:
– VDC-275 Color Indoor Dome
– VDN-276 Day/Night Indoor Dome
2.1
The camera is an ideal solution for demanding scene conditions. The Day/Night feature ensures the highest image quality possible at any time. Depending on the available light, the camera automatically switches from color to monochrome.
The camera is easy to install and can be adjusted around 3 axes. Privacy zones and motion detection functions can be set up in the handy camera menu system.
Features
– High Resolution 1/3" CCD
– Minimum Illumination (F1.2, 50IRE AGC max.):
– 0.12 Lux (Color)
– 0.07 Lux (ICR, B/W)
– High Perfomance menus for functions:
– Ultra High Resolution (650 TVL)
– BLC (Back Light Compensation)
– NR (Noise Reduction): 2DNR
– ATR (Adaptive Tone Reproduction): Digital WDR
– HLC (High Light Compensation)
– Privacy zone selectable
– Mirror
– Selectable Day / Night
– IR Cut Removable (Day/Night versions)
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
12
en | System Information
3 System Information
3.1
Indoor Dome Camera
Unpacking
Unpack carefully and handle the equipment with care. The packaging contains:
– Indoor Dome Camera
– Service monitoring cable
– Guide pattern
– Installation manual
– Mounting screws
If equipment has been damaged during shipment, repack it in the original packaging and notify the shipping agent or supplier.
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
4 Camera controls
Camera controls | en
13
4.1
Menu navigation
1.
Up
2.
Down
3.
Left
4.
Right
5.
Center
Move the cursor up in the screen.
Move the cursor down in the screen.
Move the cursor left in the screen.
Move the cursor right in the screen.
Press straight down to open Menu or
Set.
4.2
Monitoring and switches
6.
Service monitor connector
7.
Sync. switch
When installing the camera, connect a service monitor to set angle of view and focus of the screen. (This output cannot be used simultaneously with the main video output.)
Move the DIP switch to the LL position to activate Line-lock.
Move the DIP switch to INT position to activate Internal Sync.
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
14
en | Installation
5 Installation
Indoor Dome Camera
CAUTION!
Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes.
5.1
Parts
The camera unit consists of the following parts:
Guide Pattern
1.
Guide pattern
2.
Dome base
3.
Mounting screw
4.
Dome cover
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
5.2
5.2.1
Mounting the unit
Installation | en
15
Camera mounting
To mount the camera:
1.
Stick the guide pattern on the surface of installation.
2.
Drill holes as per the guide pattern and insert anchors into the mounting holes.
3.
Connect the power/video cables and feed the excessive cable length into the surface
4.
Mount the camera base on the installation surface using the three screws supplied.
5.
Adjust the focus and 3 axis bracket to obtain desired image scene.
6.
Align the dome cover over the base on the marks and snap it in.
7.
Adjust the dome cover and make sure it is properly closed.
Figure 5.1
Closing the dome
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
16
en | Installation
5.3
5.3.1
Connections
Make the connections
Video
GND
Indoor Dome Camera
Figure 5.2
Connections
Use only a 24 VAC / 12 VDC UL listed class 2 power supply.
1. Video output
2. Power input
Yellow
Green
1 Vpp
24 VAC (±20%), or
12 VDC (±10%)
Max. 3.6 W / 0.3 A
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
5.4
Adjusting the camera
Installation | en
17
1. Tilt
2. Pan
3. Rotation
4. Focus lever
5. Zoom lever
Adjusts the vertical angle.
Adjusts the horizontal angle.
Adjusts the rotational angle of the image.
Focus (Far or Near)
Zoom (Tele or Wide)
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
18
en | Camera menus
6 Camera menus
Indoor Dome Camera
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera Camera menus | en
19
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
20
en | Camera menus
6.1
Main SETUP menu
Indoor Dome Camera
Press the center button of the control pad to access the SETUP menu.
– Use the up and down buttons to move the cursor to a submenu
– Use the right and left buttons to change values.
– Press the center button to select an item.
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
6.2
Lens menu
Camera menus | en
21
6.3
6.3.1
Type: sets the mechanical iris of the lens (video mode is not used in this camera).
Mode: select AUTO, OPEN or CLOSE.
Speed: sets the convergence speed 0 to 255 of the mechanical iris (a value between 50 and 150 is recommended).
Shutter/AGC menu
Auto setup
High luminance
Mode: select AUTO IRIS or SHUT+AUTO IRIS.
Brightness: select a value between 0 and 255.
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
22
en | Camera menus Indoor Dome Camera
Low luminance
Mode: select AGC(Automatic Gain Control) or OFF.
Brightness: select between x0.25 and x1.00.
6.3.2
Manual setup
Mode: SHUT+AGC is the only option.
Shutter: select a value between 1/50 (PAL) or 1/60 (NTSC) and
1/10,000.
AGC: select between 6.00 and 44.80.
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
6.4
White balance menu
Camera menus | en
23
Select between ATW, PUSH, USER1, USER2, ANTI CR, MANUAL and PUSH LOCK.
6.4.1
ATW (auto trace white balance)
6.4.2
Speed: adjusts the pull-in speed of ATW between 0 and 255.
Delay cnt: sets the time-based hysteresis of ATW between 0 and 255).
ATW Frame: sets the pull-in frame magnification between
X0.50 andX2.00)
Environment: sets the pull-in frame of ATW to indoor or outdoor.
Push
Full pull-in adjusts the white balance regardless of the subject conditions.
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
24
en | Camera menus
6.4.3
User1 WB
Set gain values for an outdoor image.
Indoor Dome Camera
6.4.4
B-gain: BLUE level adjustment (0 to 255)
R-Gain: RED level adjustment (0 to 255)
User2 WB
Set gain values for afluorescent light.
6.4.5
B-gain: BLUE level adjustment (0 to 255)
R-Gain: RED level adjustment (0 to 255)
Anti CR
Use this feature when there is color rolling. Color rolling occurs when bright/ dark frequency of a non-inverter fluorescent light does not match the camera's driving frequency.
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
6.4.6
Manual WB
Camera menus | en
25
The B and R gain are manually set on this screen.
6.4.7
6.5
Level: RED and BLUE gain adjustment (24 to 90 for NTSC; 24 to
97 for PAL).
Push lock (hold)
If the set color temperature does not meet your environment, press the center (MENU) button to adjust the color temperature to the desired setting.
Backlight
Select between OFF, HLC, and BLC
BLC: backlight compensation lightens the darker part of the image.
HLC: High light compensation - eclipse.
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
26
en | Camera menus
6.6
Picture adjustment menu
Indoor Dome Camera
6.7
Mirror: select between ON, OFF (reverses left and right).
Brightness: select between 0 and 255.
Contrast: select between 0 and 255.
Sharpness: select between 0 and 255.
Hue: select between 0 and 255.
Gain: select between 0 and 255.
ATR menu (digital WDR)
Select OFF or ON for ATR(Adaptive Tone Reproduction).
Luminance: select between Low, Mid or High.
Contrast: select between Low, Midlow, Mid, Midhigh, or High.
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
6.8
Motion detection menu
Select OFF or ON for motion detection.
Camera menus | en
27
Detect sense: select between 0 and 127.
Block display: select ON, OFF or ENABLE . Press the center
(menu) button in ENABLE mode to access the 84 (12 x 8) blocks. To return to previous page press the center (menu) button for 5 seconds and then release it.
Monitor area: select OFF or ON.
Area select: select between 1/4(pink), 2/4(green), 3/4(purple) or 4/4(yellow).
– Top: extend or reduce the upper limit of the detection area
( 0 to 244 for NTSC; 0 to 288 for PAL).
– Bottom: extend or reduce the bottom limit of the detection area ( 0 to 244 for NTSC; 0 to 288 for PAL).
– Left: extend or reduce the left limit of the detection area (
0 to 474 for NTSC; 0 to 468 for PAL).
– Right: extend or reduce the right limit of the detection area ( 0 to 474 for NTSC; 0 to 468 for PAL).
Bosch Security Systems
LEFT
TOP
1
BOTTOM
RIGHT
Installation Manual
reduce RIGHT extend
1
AM18-Q0609 | v1.0 | 2012.01
28
en | Camera menus
6.9
Privacy menu
Select OFF or ON for motion detection.
Indoor Dome Camera
Area select: select between 1/4, 2/4, 3/4 or 4/4.
– Top: extend or reduce the upper limit of the detection area
( 0 to 244 for NTSC; 0 to 288 for PAL).
– Bottom: extend or reduce the bottom limit of the detection area ( 0 to 244 for NTSC; 0 to 288 for PAL).
– Left: extend or reduce the left limit of the detection area (
0 to 474 for NTSC; 0 to 468 for PAL).
– Right: extend or reduce the right limit of the detection area ( 0 to 474 for NTSC; 0 to 468 for PAL).
TOP reduce RIGHT extend
LEFT
1
RIGHT
1
BOTTOM
Color: select 1 (red), 2 (green), 3 (blue), 4 (yellow), 5 (cyan),
6 (magenta), 7 (white) or 8 (black).
Transparancy: select between 0.0 and 1.0.
Mozaic: select OFF or ON.
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
6.10
Day /Night menu
Camera menus | en
29
Select AUTO, COLOR or B/W for day/night control.
6.10.1
Auto
Burst: select OFF or ON.
Delay cnt: adjust the delay timing between 0 and 255.
Day->Night: adjust the day to night threshold between 0 and
255.
Night->Day: adjust the night to day threshold between 0 and
255.
The following levels for day/night switching are recommended:
Low
Level Lux
Day to night 1
Night to day 12
0.7
1.8
2
20
Medium
Level Lux
1.5
2.5
Level
3
28
High
Lux
2.3
3.5
6.10.2
Note:
If levels are configured incorrectly, day/night switching may not work.
Color
Select for color (day) mode only.
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
30
en | Camera menus
6.10.3
B/W
Select for black/white (night) mode only
Indoor Dome Camera
6.11
Burst: select OFF or ON.
NR (noise reduction) menu
NR mode: select between OFF, Y/C, Y or C.
Y level: select between 0 and 15.
C level: select between 0 and 15.
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
6.12
Camera ID menu
Select OFF or ON.
Camera menus | en
31
When ON is selected, a virtual keyboard appears on the screen.
Use the control pad to move to the character you want and select it. Repeat this to enter the camera ID you desire. You can enter up to 52 characters.
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
32
en | Camera menus
6.13
Synchronisation menu
Indoor Dome Camera
The sync. switch on the camera control panel selects either:
– INT: Internal synchronisation
– LL: Line-lock synchronisation (only available with a 24 VAC power supply).
If LL is selected the following phase menu is available.
6.14
6.15
6.16
6.17
Phase: adjust the phase (vertical direction) between 0 and 524 for NTSC, or 0 and 624 for PAL.
Language
Select between English, Japanese, German, French, Russian,
Portuguese, Spanish, or Simplified Chinese.
Camera reset
Select to recall the default configurations of General submenu parameters only.
Return
Select to return to the main menu.
Next
Select to proceed to the next menu.
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
6.18
Save all
Select to save all settings.
6.19
6.20
Camera menus | en
33
Exit
Select to exit the setup menu.
White pixel menu
When the setup menu is off, hold the Up button for 5 seconds to open the white pixel correction menu. Put the lens cover in place to carry out white pixel correction.
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
34
en | Troubleshooting
7 Troubleshooting
7.1
Indoor Dome Camera
Resolving problems
The following table is intended to help identify the causes of malfunctions and correct them where possible.
Malfunction
The image on the screen is dim.
Solution
No image on screen. Check that the power cord and line connection between the camera and monitor are fixed properly.
Check that you have properly connected
VIDEO cable to the camera VIDEO output jack.
Is lens stained with dirt? Clean your lens with soft, clean cloth.
Ensure the monitor is set up correctly.
The image on the screen is dark.
The camera is not working properly, and its surface is hot.
The image on the screen flickers.
If the camera is exposed to strong light, change its position.
Adjust the focus.
Adjust the contrast of the monitor.
If you have an intermediate device, set the 75 Ohm / Hi-z correctly.
Check that you have properly connected the camera to an appropriate power source.
Check whether the camera is exposed to strong sunlight or fluorescent lighting.
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Indoor Dome Camera
8 Technical Data
8.1
Technical Data | en
35
Specifications
Image sensor
Effective pixels (HxV)
Video outups
Sync. system
Luminance S/N ratio
Actual resolution
Lens type
Sensitivity (F1.2, 50 IRE)
Color camera
Sensitivity (F1.2, 50 IRE)
Day/night camera
Electronic shutter
960H, 1/3" CCD, sensor resolution
720 TVL
976x494 (NTSC)
976x582 (PAL)
Composite: 1.0 Vpp, 75 Ohm
Unbalanced
Internal Sync, Line Lock Sync
50dB Min.(AGC off)
650 TV Lines
Varifocal DC iris f=2.8 to 10.5 mm
Color and B/W: 0.12 lx
White balance
Backlight
AGC
ATR
NR (2DNR)
Day/Night
Burst
Motion detection
Privacy
Mirror
Color: 0.12 lx
B/W: 0.07 lx
1/60 to 10,000 S (NTSC)
1/50 to 10,000 S (PAL)
ATW, PUSH, USER1, USER2,
ANTI CR, MANUAL, PUSH LOCK
OFF/BLC/HLC
AUTO (0FF, 37 dB)
MANUAL (6.00 dB to 44.80 dB)
OFF/ON
YC/OFF/Y/C
COLOR, B/W, AUTO
ON/OFF
OFF/ON (4 zones)
OFF/ON (4 zones)
OFF/ON
Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01
36
en | Technical Data
Sharpness
OSD languages
Supply voltages
Indoor Dome Camera
0 to 255
English, Japanese, German,
French, Russian, Portuguese,
Spanish, Simplified Chinese
24 VAC (-20%+20%), or
12 VDC (-10%+10%)
Max. 3.6 W, 0.3 A
-10°C to + 50°C / 30% to 90% RH
Power consumption
Operation temperature/ humidity
Storage temperature/ humidity
External dimensions
Weight
-20°C to + 60°C / 20% to 90% RH
100 (Ø), 102/101/124.5 (H) mm
280 g
AM18-Q0609 | v1.0 | 2012.01
Installation Manual Bosch Security Systems
Bosch Security Systems www.boschsecurity.com
© Bosch Security Systems,, 2012
advertisement
Key Features
- High Resolution 1/3" CCD
- Ultra High Resolution (650 TVL)
- BLC (Back Light Compensation)
- NR (Noise Reduction): 2DNR
- ATR (Adaptive Tone Reproduction): Digital WDR
- HLC (High Light Compensation)
- Privacy zone selectable
- Mirror
- Selectable Day / Night
- IR Cut Removable (Day/Night versions)
