Indoor Dome Camera - Surveillance

Indoor Dome Camera - Surveillance

Indoor Dome Camera

VDC-275 / VDN-276

en

Installation Manual

Table of Contents

1

1.1

1.2

1.3

1.4

1.5

2

2.1

Safety

Safety precautions

Important safety instructions

FCC & ICES compliance

UL certification

Bosch notices

Introduction

Features

3

3.1

4

4.1

4.2

System Information

Unpacking

Camera controls

Menu navigation

Monitoring and switches

5

5.1

5.2

5.2.1

5.3

5.3.1

5.4

Installation

Parts

Mounting the unit

Camera mounting

Connections

Make the connections

Adjusting the camera

6

6.1

6.2

6.3

6.3.1

6.3.2

6.4

Camera menus

Main SETUP menu

Lens menu

Shutter/AGC menu

Auto setup

Manual setup

White balance menu

Table of Contents | en

3

18

20

21

21

21

22

23

| |

15

16

16

17

14

14

15

12

12

13

13

13

8

9

10

5

5

6

11

11

7

7.1

8

8.1

4

en | Table of Contents

6.7

6.8

6.9

6.10

6.10.1

6.10.2

6.10.3

6.11

6.12

6.13

6.14

6.15

6.16

6.17

6.18

6.19

6.20

6.4.1

6.4.2

6.4.3

6.4.4

6.4.5

6.4.6

6.4.7

6.5

6.6

ATW (auto trace white balance)

Push

User1 WB

User2 WB

Anti CR

Manual WB

Push lock (hold)

Backlight

Picture adjustment menu

ATR menu (digital WDR)

Motion detection menu

Privacy menu

Day /Night menu

Auto

Color

B/W

NR (noise reduction) menu

Camera ID menu

Synchronisation menu

Language

Camera reset

Return

Next

Save all

Exit

White pixel menu

Troubleshooting

Resolving problems

Technical Data

Specifications

| |

34

34

35

35

29

30

30

31

32

32

32

26

27

28

29

29

32

32

33

33

33

24

25

25

25

26

23

23

24

24

Indoor Dome Camera

1 Safety

1.1

Safety | en

5

Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product.

If not avoided, this will result in an electrical shock, serious bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of damage to the unit.

CAUTION!

The Low Voltage power supply unit must comply with EN60950

/ UL60065. The power supply must be a SELV-LPS unit or a

SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power

Source).

CAUTION!

Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes.

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

6

en | Safety

1.2

Indoor Dome Camera

Important safety instructions

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions

5.

Do not use this apparatus near water.

6.

Clean only with a dry cloth.

7.

Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8.

Do not install unit near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.

Do not defeat the purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a grounding prong. The wide blade and third prong are provided for your safety. I the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera Safety | en

7

WARNING!

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

CAUTION!

Apparatus shall not be exposed to dripping or spashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

8

en | Safety

1.3

Indoor Dome Camera

FCC & ICES compliance

FCC & ICES Information

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– reorient or relocate the receiving antenna;

– increase the separation between the equipment and receiver;

– connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

– consult the dealer or an experienced radio/TV technician for help.

Intentional or unintentional modifications, not expressly approved by the party responsible for compliance, shall not be made. Any such modifications could void the user's authority to operate the equipment. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action.

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

1.4

UL certification

Safety | en

9

Disclaimer

Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Information

Technology Equipment, UL 60065. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.

UL MAKES NO REPRESENTATIONS, WARRANTIES, OR

CERTIFICATIONS WHATSOEVER REGARDING THE

PERFORMANCE OR RELIABILITY OF ANY SECURITY OR

SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.

Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products. Please dispose of these units at an environmentally compatible recycling facility, per European

Directive 2002/96/EC

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

10

en | Safety

1.5

Indoor Dome Camera

Bosch notices

Optical elements

Optical elements are sensitive and should be protected at all times. Do not allow objects to come into contact with glass surfaces and do not touch optical elements with your fingers.

Copyright

This manual is the intellectual property of Bosch Security

Systems and is protected by copyright.

All rights reserved.

Trademarks

All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.

Note

This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described.

More information

For more information please contact the nearest Bosch Security

Systems location or visit www.boschsecurity.com

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

2 Introduction

Introduction | en

11

These indoor domes are compact, stylish surveillance cameras that offer excellent resolution in variable lighting conditions.

The high performance 1/3 inch CCD provides a resolution of

650 TVL. The dome is available in two versions:

VDC-275 Color Indoor Dome

VDN-276 Day/Night Indoor Dome

2.1

The camera is an ideal solution for demanding scene conditions. The Day/Night feature ensures the highest image quality possible at any time. Depending on the available light, the camera automatically switches from color to monochrome.

The camera is easy to install and can be adjusted around 3 axes. Privacy zones and motion detection functions can be set up in the handy camera menu system.

Features

– High Resolution 1/3" CCD

– Minimum Illumination (F1.2, 50IRE AGC max.):

– 0.12 Lux (Color)

– 0.07 Lux (ICR, B/W)

– High Perfomance menus for functions:

– Ultra High Resolution (650 TVL)

– BLC (Back Light Compensation)

– NR (Noise Reduction): 2DNR

– ATR (Adaptive Tone Reproduction): Digital WDR

– HLC (High Light Compensation)

– Privacy zone selectable

– Mirror

– Selectable Day / Night

– IR Cut Removable (Day/Night versions)

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

12

en | System Information

3 System Information

3.1

Indoor Dome Camera

Unpacking

Unpack carefully and handle the equipment with care. The packaging contains:

– Indoor Dome Camera

– Service monitoring cable

– Guide pattern

– Installation manual

– Mounting screws

If equipment has been damaged during shipment, repack it in the original packaging and notify the shipping agent or supplier.

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

4 Camera controls

Camera controls | en

13

4.1

Menu navigation

1.

Up

2.

Down

3.

Left

4.

Right

5.

Center

Move the cursor up in the screen.

Move the cursor down in the screen.

Move the cursor left in the screen.

Move the cursor right in the screen.

Press straight down to open Menu or

Set.

4.2

Monitoring and switches

6.

Service monitor connector

7.

Sync. switch

When installing the camera, connect a service monitor to set angle of view and focus of the screen. (This output cannot be used simultaneously with the main video output.)

Move the DIP switch to the LL position to activate Line-lock.

Move the DIP switch to INT position to activate Internal Sync.

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

14

en | Installation

5 Installation

Indoor Dome Camera

CAUTION!

Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes.

5.1

Parts

The camera unit consists of the following parts:

Guide Pattern

1.

Guide pattern

2.

Dome base

3.

Mounting screw

4.

Dome cover

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

5.2

5.2.1

Mounting the unit

Installation | en

15

Camera mounting

To mount the camera:

1.

Stick the guide pattern on the surface of installation.

2.

Drill holes as per the guide pattern and insert anchors into the mounting holes.

3.

Connect the power/video cables and feed the excessive cable length into the surface

4.

Mount the camera base on the installation surface using the three screws supplied.

5.

Adjust the focus and 3 axis bracket to obtain desired image scene.

6.

Align the dome cover over the base on the marks and snap it in.

7.

Adjust the dome cover and make sure it is properly closed.

Figure 5.1

Closing the dome

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

16

en | Installation

5.3

5.3.1

Connections

Make the connections

Video

GND

Indoor Dome Camera

Figure 5.2

Connections

Use only a 24 VAC / 12 VDC UL listed class 2 power supply.

1. Video output

2. Power input

Yellow

Green

1 Vpp

24 VAC (±20%), or

12 VDC (±10%)

Max. 3.6 W / 0.3 A

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

5.4

Adjusting the camera

Installation | en

17

1. Tilt

2. Pan

3. Rotation

4. Focus lever

5. Zoom lever

Adjusts the vertical angle.

Adjusts the horizontal angle.

Adjusts the rotational angle of the image.

Focus (Far or Near)

Zoom (Tele or Wide)

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

18

en | Camera menus

6 Camera menus

Indoor Dome Camera

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera Camera menus | en

19

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

20

en | Camera menus

6.1

Main SETUP menu

Indoor Dome Camera

Press the center button of the control pad to access the SETUP menu.

– Use the up and down buttons to move the cursor to a submenu

– Use the right and left buttons to change values.

– Press the center button to select an item.

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

6.2

Lens menu

Camera menus | en

21

6.3

6.3.1

Type: sets the mechanical iris of the lens (video mode is not used in this camera).

Mode: select AUTO, OPEN or CLOSE.

Speed: sets the convergence speed 0 to 255 of the mechanical iris (a value between 50 and 150 is recommended).

Shutter/AGC menu

Auto setup

High luminance

Mode: select AUTO IRIS or SHUT+AUTO IRIS.

Brightness: select a value between 0 and 255.

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

22

en | Camera menus Indoor Dome Camera

Low luminance

Mode: select AGC(Automatic Gain Control) or OFF.

Brightness: select between x0.25 and x1.00.

6.3.2

Manual setup

Mode: SHUT+AGC is the only option.

Shutter: select a value between 1/50 (PAL) or 1/60 (NTSC) and

1/10,000.

AGC: select between 6.00 and 44.80.

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

6.4

White balance menu

Camera menus | en

23

Select between ATW, PUSH, USER1, USER2, ANTI CR, MANUAL and PUSH LOCK.

6.4.1

ATW (auto trace white balance)

6.4.2

Speed: adjusts the pull-in speed of ATW between 0 and 255.

Delay cnt: sets the time-based hysteresis of ATW between 0 and 255).

ATW Frame: sets the pull-in frame magnification between

X0.50 andX2.00)

Environment: sets the pull-in frame of ATW to indoor or outdoor.

Push

Full pull-in adjusts the white balance regardless of the subject conditions.

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

24

en | Camera menus

6.4.3

User1 WB

Set gain values for an outdoor image.

Indoor Dome Camera

6.4.4

B-gain: BLUE level adjustment (0 to 255)

R-Gain: RED level adjustment (0 to 255)

User2 WB

Set gain values for afluorescent light.

6.4.5

B-gain: BLUE level adjustment (0 to 255)

R-Gain: RED level adjustment (0 to 255)

Anti CR

Use this feature when there is color rolling. Color rolling occurs when bright/ dark frequency of a non-inverter fluorescent light does not match the camera's driving frequency.

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

6.4.6

Manual WB

Camera menus | en

25

The B and R gain are manually set on this screen.

6.4.7

6.5

Level: RED and BLUE gain adjustment (24 to 90 for NTSC; 24 to

97 for PAL).

Push lock (hold)

If the set color temperature does not meet your environment, press the center (MENU) button to adjust the color temperature to the desired setting.

Backlight

Select between OFF, HLC, and BLC

BLC: backlight compensation lightens the darker part of the image.

HLC: High light compensation - eclipse.

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

26

en | Camera menus

6.6

Picture adjustment menu

Indoor Dome Camera

6.7

Mirror: select between ON, OFF (reverses left and right).

Brightness: select between 0 and 255.

Contrast: select between 0 and 255.

Sharpness: select between 0 and 255.

Hue: select between 0 and 255.

Gain: select between 0 and 255.

ATR menu (digital WDR)

Select OFF or ON for ATR(Adaptive Tone Reproduction).

Luminance: select between Low, Mid or High.

Contrast: select between Low, Midlow, Mid, Midhigh, or High.

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

6.8

Motion detection menu

Select OFF or ON for motion detection.

Camera menus | en

27

Detect sense: select between 0 and 127.

Block display: select ON, OFF or ENABLE . Press the center

(menu) button in ENABLE mode to access the 84 (12 x 8) blocks. To return to previous page press the center (menu) button for 5 seconds and then release it.

Monitor area: select OFF or ON.

Area select: select between 1/4(pink), 2/4(green), 3/4(purple) or 4/4(yellow).

Top: extend or reduce the upper limit of the detection area

( 0 to 244 for NTSC; 0 to 288 for PAL).

Bottom: extend or reduce the bottom limit of the detection area ( 0 to 244 for NTSC; 0 to 288 for PAL).

Left: extend or reduce the left limit of the detection area (

0 to 474 for NTSC; 0 to 468 for PAL).

Right: extend or reduce the right limit of the detection area ( 0 to 474 for NTSC; 0 to 468 for PAL).

Bosch Security Systems

LEFT

TOP

1

BOTTOM

RIGHT

Installation Manual

reduce RIGHT extend

1

AM18-Q0609 | v1.0 | 2012.01

28

en | Camera menus

6.9

Privacy menu

Select OFF or ON for motion detection.

Indoor Dome Camera

Area select: select between 1/4, 2/4, 3/4 or 4/4.

Top: extend or reduce the upper limit of the detection area

( 0 to 244 for NTSC; 0 to 288 for PAL).

Bottom: extend or reduce the bottom limit of the detection area ( 0 to 244 for NTSC; 0 to 288 for PAL).

Left: extend or reduce the left limit of the detection area (

0 to 474 for NTSC; 0 to 468 for PAL).

Right: extend or reduce the right limit of the detection area ( 0 to 474 for NTSC; 0 to 468 for PAL).

TOP reduce RIGHT extend

LEFT

1

RIGHT

1

BOTTOM

Color: select 1 (red), 2 (green), 3 (blue), 4 (yellow), 5 (cyan),

6 (magenta), 7 (white) or 8 (black).

Transparancy: select between 0.0 and 1.0.

Mozaic: select OFF or ON.

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

6.10

Day /Night menu

Camera menus | en

29

Select AUTO, COLOR or B/W for day/night control.

6.10.1

Auto

Burst: select OFF or ON.

Delay cnt: adjust the delay timing between 0 and 255.

Day->Night: adjust the day to night threshold between 0 and

255.

Night->Day: adjust the night to day threshold between 0 and

255.

The following levels for day/night switching are recommended:

Low

Level Lux

Day to night 1

Night to day 12

0.7

1.8

2

20

Medium

Level Lux

1.5

2.5

Level

3

28

High

Lux

2.3

3.5

6.10.2

Note:

If levels are configured incorrectly, day/night switching may not work.

Color

Select for color (day) mode only.

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

30

en | Camera menus

6.10.3

B/W

Select for black/white (night) mode only

Indoor Dome Camera

6.11

Burst: select OFF or ON.

NR (noise reduction) menu

NR mode: select between OFF, Y/C, Y or C.

Y level: select between 0 and 15.

C level: select between 0 and 15.

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

6.12

Camera ID menu

Select OFF or ON.

Camera menus | en

31

When ON is selected, a virtual keyboard appears on the screen.

Use the control pad to move to the character you want and select it. Repeat this to enter the camera ID you desire. You can enter up to 52 characters.

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

32

en | Camera menus

6.13

Synchronisation menu

Indoor Dome Camera

The sync. switch on the camera control panel selects either:

INT: Internal synchronisation

LL: Line-lock synchronisation (only available with a 24 VAC power supply).

If LL is selected the following phase menu is available.

6.14

6.15

6.16

6.17

Phase: adjust the phase (vertical direction) between 0 and 524 for NTSC, or 0 and 624 for PAL.

Language

Select between English, Japanese, German, French, Russian,

Portuguese, Spanish, or Simplified Chinese.

Camera reset

Select to recall the default configurations of General submenu parameters only.

Return

Select to return to the main menu.

Next

Select to proceed to the next menu.

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

6.18

Save all

Select to save all settings.

6.19

6.20

Camera menus | en

33

Exit

Select to exit the setup menu.

White pixel menu

When the setup menu is off, hold the Up button for 5 seconds to open the white pixel correction menu. Put the lens cover in place to carry out white pixel correction.

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

34

en | Troubleshooting

7 Troubleshooting

7.1

Indoor Dome Camera

Resolving problems

The following table is intended to help identify the causes of malfunctions and correct them where possible.

Malfunction

The image on the screen is dim.

Solution

No image on screen. Check that the power cord and line connection between the camera and monitor are fixed properly.

Check that you have properly connected

VIDEO cable to the camera VIDEO output jack.

Is lens stained with dirt? Clean your lens with soft, clean cloth.

Ensure the monitor is set up correctly.

The image on the screen is dark.

The camera is not working properly, and its surface is hot.

The image on the screen flickers.

If the camera is exposed to strong light, change its position.

Adjust the focus.

Adjust the contrast of the monitor.

If you have an intermediate device, set the 75 Ohm / Hi-z correctly.

Check that you have properly connected the camera to an appropriate power source.

Check whether the camera is exposed to strong sunlight or fluorescent lighting.

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Indoor Dome Camera

8 Technical Data

8.1

Technical Data | en

35

Specifications

Image sensor

Effective pixels (HxV)

Video outups

Sync. system

Luminance S/N ratio

Actual resolution

Lens type

Sensitivity (F1.2, 50 IRE)

Color camera

Sensitivity (F1.2, 50 IRE)

Day/night camera

Electronic shutter

960H, 1/3" CCD, sensor resolution

720 TVL

976x494 (NTSC)

976x582 (PAL)

Composite: 1.0 Vpp, 75 Ohm

Unbalanced

Internal Sync, Line Lock Sync

50dB Min.(AGC off)

650 TV Lines

Varifocal DC iris f=2.8 to 10.5 mm

Color and B/W: 0.12 lx

White balance

Backlight

AGC

ATR

NR (2DNR)

Day/Night

Burst

Motion detection

Privacy

Mirror

Color: 0.12 lx

B/W: 0.07 lx

1/60 to 10,000 S (NTSC)

1/50 to 10,000 S (PAL)

ATW, PUSH, USER1, USER2,

ANTI CR, MANUAL, PUSH LOCK

OFF/BLC/HLC

AUTO (0FF, 37 dB)

MANUAL (6.00 dB to 44.80 dB)

OFF/ON

YC/OFF/Y/C

COLOR, B/W, AUTO

ON/OFF

OFF/ON (4 zones)

OFF/ON (4 zones)

OFF/ON

Bosch Security Systems Installation Manual AM18-Q0609 | v1.0 | 2012.01

36

en | Technical Data

Sharpness

OSD languages

Supply voltages

Indoor Dome Camera

0 to 255

English, Japanese, German,

French, Russian, Portuguese,

Spanish, Simplified Chinese

24 VAC (-20%+20%), or

12 VDC (-10%+10%)

Max. 3.6 W, 0.3 A

-10°C to + 50°C / 30% to 90% RH

Power consumption

Operation temperature/ humidity

Storage temperature/ humidity

External dimensions

Weight

-20°C to + 60°C / 20% to 90% RH

100 (Ø), 102/101/124.5 (H) mm

280 g

AM18-Q0609 | v1.0 | 2012.01

Installation Manual Bosch Security Systems

Bosch Security Systems www.boschsecurity.com

© Bosch Security Systems,, 2012

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents