G as System s: R eg u lato rs, C omp resso rs, C ylin d

G as System s: R eg u lato rs, C omp resso rs, C ylin d
1.
2.
3.
4.
www.absone.com
E-mail: [email protected]
877-814-2271
Local: 847-524-1707
Fax: 847-524-1710
Regulators and Accessories
CO2 Cylinders and Accessories
CO2 Detectors/Alarms
Air Compressor and Parts
Primary High Pressure CO2 Regulators
T5741PMHP
High performance T5700 Series high pressure (HP) tank or wall
mounting regulators have an interlocking seat and self-relieving
diaphragm. Poly bonnet and cap will not chip, break or fade. UL
approved per UL252 class IV rating for CO2 and provides up to 2
SCFM additional flow. Maximum inlet pressure: 3300 psi.
T5741PMHPB
T5741PMHPBK
T7430K-6
Economy 3000 Series regulators have a safety check valve and
self-relieving diaphragm. UL approved per UL252 class IV rating
for CO2. Maximum inlet pressure: 3000 psi.
T8861-6
3734
Standard operating range is 0-130 psi, but can be preset to other
pressures to meet customer requirements. Temperature range:
-40˚ F to +200˚ F. Ports are 1/4" FPT. HP regulators are LH thread.
HP hoses are available in 3, 6 and 9 foot lengths. Inlet is a CO2
swivel nut, and outlet is a 1/4" MFL fitting.
3741
3735
3752
See our Bar Equipment Section H
for beer regulators and beer fittings
Part Number
Type of Regulator
Gauge
Mount Additional Info
T5741PMHPBK
T5741PMHPBK-01
T5741PMHPBKGP
T5741PMHPBK-01
T5741WMHP
T5741WMHP-3
T5741WMHP-6
T5745HPBK
T5752HP-02
T5752WMHP-06-3
T5740HP160BK
5741PMHPN
T7430K-3
T7430K-6
T8861-6
T88616B
C77002
7430K3
7430K6
3741
3735
3752
3753
3754
Primary, 1P x 1P
Primary, 1P x 1P
Primary, 1P x 1P
Primary, 1P x 1P
Primary, 1P x 1P
Primary, 1P x 1P
Primary, 1P x 1P
Primary, 1P x 5P
Primary, 2P x 2P
Primary, 2P x 2P
Primary body, black cap
Nitrogen, 1P x 1P
Twin Cylinder
Twin Cylinder
Primary & secondary, 2P x 2P
Primary & secondary, 2P x 2P
Primary & secondary, 2P x 2P
Primary
Primary
Primary, 1Pressure x 1Product
Primary, 1P x 5P
Primary, 2P x 2P
Primary, 2P x 3P
Primary, 2P x 4P
2000 x 160
2000 x 160
2000 x 160
2000 x 160
2000 x 160
2000 x 160
2000 x 160
2000 x 160
2000 x 160
2000 x 160
2000 x 160
3000 x 160
3000 x 160
3000 x 160
Tank
Tank
Tank
Tank
Wall
Wall
Wall
Tank
Tank
Wall
Tank
Tank
Wall
Wall
2000 x 160 x 100
Wall
2000 x 160
2000 x 160
2000 x 160 x 160
2000 x 160 x 160
2000 x 160 x 160
Tank
Tank
Tank
Tank
Tank
1/4" MFL with check valve, black cap
1/4" barb, black cap
1/4" MFL with check valve, black cap, gauge guard
1/4" barb shutoff with check valve
1/4" MFL with check valve, red cap
With 3' high pressure hose
With 6' high pressure hose
(5) 1/4" MFL w check valve, vertical manifold, red cap
1/4" MFL with check valve, red cap
Regulator body assy for 160# gauge, no fittings
Nitrogen, 1/4" MFL with check valve, black bonnet
Changeover valve, two 3' high pressure hoses
Changeover valve, two 6' high pressure hoses
With 6' high pressure hose, red
With 6' high pressure hose, blue
With 6’ high pressure hose
With 7430 changeover & 3’ high pressure hose
With 7430 changeover & 6’ high pressure hose
1/4" MFL with check valve outlet
Manifold, horizontal, 1/4" MFL with check valve
1/4" MFL with check valve outlet
1/4" MFL with check valve outlet
(2+2) 1/4" MFL with check valve outlet
Page D-1
Gas Systems: Regulators, Compressors, Cylinders
Advanced Beverage Solutions
100 Gary Avenue, Suite C
Roselle, IL 60172
www.absone.com
E-mail: [email protected]
877-814-2271
Local: 847-524-1707
Fax: 847-524-1710
Secondary Low Pressure CO2 Regulators
The T5200SN Series is a secondary reducing valve designed to maximize
the performance of fountain dispensers. Interlocking seat and selfrelieving diaphragm, and non-removable adjustment screws are standard.
Poly bonnet and cap will not chip, break or fade. LP regulators are RH
thread unless otherwise specified.
UL approved per UL252 class IV rating for CO2. Standard operating range
is 0-100 psi, but can be preset to other pressures to meet customer
requirements. Maximum inlet pressure: 3000 psi. Temperature range: -40˚
F to +200˚ F. Inlet and outlet ports are 1/4" MFL.
T6366SN
T5261SN
T5261SND
T5261SN75 31-0501-16
T5365SN
T5366SN
T5376SN
T6368SN
Part Number
Type of Regulator or Manifold
Gauge
Mount
Additional Info
T5261SND
T5272SN
T5261SN-03
T5261SN75
T5260SN100
T5260SN100BK
T5364SN
T5365SN
T5366SN
T5368SN
T5375SN
T5376SN
T6365SN
T6366SN
T6368SN
31-0501-16
31-0500-16
3734-100
Secondary, 1P x 1P
Secondary, 2P x 2P
Secondary, 1P x 1P
Secondary, 1P x 1P
Secondary, body, gold cap
Secondary, body, black cap
Secondary, 1P x 4P
Secondary, 1P x 5P
Secondary, 1P x 6P
Secondary, 1P x 8P
Secondary, 2P x 5P
Secondary, 2P x 6P
Secondary, 1P x 5P
Secondary, 1P x 6P
Secondary, 1P x 8P
Secondary, 1P x 1P
Secondary, 1P x 1P
Secondary, 1P x 4P
30
100
100
160
N/A
N/A
100
100
100
100
100 x 30
100 x 30
100
100
100
75
75
100
Wall
Wall
Wall
Wall
N/A
N/A
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
Wall
1/4" MFL outlet with check, gold cap
1/4" MFL outlet with check, gold cap
1/4 barb inlet and outlet
Pepsi Intellicarb (preset non-adjustable psi)
Regulator body assy for 100# gauge
Regulator body assy for 100# gauge
MFL bar type outlet with check
MFL bar type outlet with check
MFL bar type outlet with check
MFL bar type outlet with check
MFL bar type outlet with check
MFL bar type outlet with check
MFL manifold with shutoff
MFL manifold with shutoff
MFL manifold with shutoff
For Intellicarb fountain dispenser, with gauge
For Intellicarb fountain dispenser, without gauge
Pre-mix, bar type
Page D-2
Continuing product improvements may necessitate changes without notice. © 2015 ABS
Gas Systems: Regulators, Compressors, Cylinders
Advanced Beverage Solutions
100 Gary Avenue, Suite C
Roselle, IL 60172
877-814-2271
Local: 847-524-1707
Fax: 847-524-1710
www.absone.com
E-mail: [email protected]
Gas Systems: Regulators, Compressors, Cylinders
Advanced Beverage Solutions
100 Gary Avenue, Suite C
Roselle, IL 60172
Regulator Bar Manifolds for BIB and FIGAL Dispensing
2554
2546
2548
5364-1A
5365-1A
Part Number
Type of Manifold
Mount
Additional Info
6444*
6446*
6448*
2554*
2546*
2548*
5364-1A
5365-1A
394-K44
395-K44
396-K44
397-K44
398-K44
399-K44
399-KH-4
Manifold, 4Product
Manifold, 6P
Manifold, 8P
Manifold, 4P
Manifold, 6P
Manifold, 8P
Manifold, 4P
Manifold, 5P
Manifold, 4P
Manifold, 5P
Manifold, 6P
Manifold, 7P
Manifold, 8P
Manifold, 9P
Manifold, 9P
Regulator
Regulator
Regulator
Wall
Wall
Wall
Regulator
Regulator
Manifold with shutoff
Manifold with shutoff
Manifold with shutoff
90˚ Manifold with individual shutoffs
90˚ Manifold with individual shutoffs
90˚ Manifold with individual shutoffs
Manifold, standard 1/4" SAE (M) with check valve
Manifold, standard 1/4" SAE (M) with check valve
RH 1/4" MFL inlet, (4) 1/4 MFL air-cock outlets
RH 1/4" MFL inlet, (5) 1/4 MFL air-cock outlets
RH 1/4" MFL inlet, (6) 1/4 MFL air-cock outlets
RH 1/4" MFL inlet, (7) 1/4 MFL air-cock outlets
RH 1/4" MFL inlet, (8) 1/4 MFL air-cock outlets
RH 1/4" MFL inlet, (9) 1/4 MFL air-cock outlets
9-way barb air-cock with shutoff, 1/4"
*Add suffix C to part number for back flow checks (6444C)
Regulator Repair Kits
Part Number
Description
3740-15
740-15
7740-15
7740-15N
Regulator repair kit, 3000 Series
Regulator repair kit, self-centering, 700 and 1600 Series (prior to 10/2006)
Regulator repair kit: 77003C, 77006T, 44017Q
Nitrogen regulator repair kit
Regulator repair kit
Regulator Changeovers
Part Number
Description
7430
7431
1421
High pressure changeover valve assy, 1/4" MFL, Taprite
CO2 changeover kit
High pressure changeover valve assy, 1/4" MFL, Chudnow
7430
1421
7431
Page D-3
Regulator Parts and Accessories
770-6T
7700-3C
HP hose assembly
440-4PN
RK1000-0051
600GPS
03S07100
63NY
440-18
63
22-0016
Gauges
1690-2N-1
08-1080-00
1690-3S
RHB-32
PT1000
5232B
740-19
2701-BCT
440-12
740-12
440-17Q
440-17R
5460
740-12N
C296
C295
Page D-4
More Carbonation Testers and parts
are located in Water Systems on page E-7.
www.absone.com
E-mail: [email protected]
877-814-2271
Local: 847-524-1707
Fax: 847-524-1710
Part Number
Description
7000-3A
7000-6A
7000-9A
3740-2PA
7700-6T
7700-3C
600GPS
03S07100
RK1000-0051
440-4PN
63
63NY
20W1005H02L30#
20W1005H02L60#
20W1005H02L100#
20W1005H02L160#
20W1005H02L300#
6603-2000
5603
6603
440-18
440-19
22-0016
08-1080-00
5201738506212
1690-3S
1690-2N-1
REGMT-24
PT1000
2701-BCT
RBH-32
440-12
440-17Q
440-17R
740-12
740-12N
740-13N
740-16
740-19
5460
5232B
1000730
JO-11N
C296
C295
3' High pressure hose assembly
6' High pressure hose assembly
9' High pressure hose assembly
Bonnet, black, 3000 series
Replacement diaphragm assembly, new style
Replacement seat assembly, new style
Gauge boot protector
C133 Gorman gauge protector
Gauge guard, single body regulator
Guide nut tool
Fiber CO2 washer
Nylon CO2 flare washer
Gauge, 30 # PSIG RH thread
Gauge, 60 # PSIG RH thread
Gauge, 100 # PSIG RH thread
Gauge, 160 # PSIG RH thread
Gauge, 300 # PSIG RH thread
Gauge, 2000 # PSIG LH thread
Gauge, 3000 # PSIG RH thread
Gauge, 3000 # PSIG LH thread
Wrench, CO2 regulator, Taprite zinc bonnet
Wrench, CO2 regulator, Taprite poly bonnet
Wrench, CO2 regulator, Lancer
Regulator mounting bracket for louvered rack
Lock washer for regulator bracket
Hex bolt
SS bracket for regulator mounting
Regulator mount, 24", galvanized steel
CO2 pressure tester
Beer carbonation tester with protective case
Economy Refractometer
Brass CO2 inlet nipple RH thread
Inlet nipple quad ring
O-ring for CO2 nipple
CO2 inlet nipple, O-ring seal, left hand
Nitrogen inlet nipple 1/4" MPT left hand thread
Nitrogen tank nut, male thread
MPT plug, 1/4" LH thread
Replacement CO2 nut and nipple assy, LH
Forged Y, (2) 1/4 FPT x 1/4 MPT
Brass cap, 1/4" SAE
Brass CO2 nut, CGA 320
Regulator fitting RH thread
CO2 to nitrogen adapter
Nitrogen to CO2 adapter
Continuing product improvements may necessitate changes without notice. © 2015 ABS
Gas Systems: Regulators, Compressors, Cylinders
Advanced Beverage Solutions
100 Gary Avenue, Suite C
Roselle, IL 60172
877-814-2271
Local: 847-524-1707
Fax: 847-524-1710
www.absone.com
E-mail: [email protected]
Regulator Parts and Accessories
Part Number Description
6600
6600C
CO882015
CO882020
CO882029
CO882028
8100B
8101B
8120B
8121B
8160B
8161B
5153B
5436
5436H
617BN
431-P44
618L
08-0564
08-0578
ST-B78C12-12F
CO2RS-C
Shutoff outlet for BIB, no check, 1/4" SAE male
Shutoff outlet for BIB, with check, 1/4" SAE male
Barbed shutoff, 1/4"
Barbed shutoff, 5/16"
Barbed shutoff, 5/16"
Barbed shutoff with check valve, 5/16"
Brass shutoff, 1/4 MPT x 5/16 barb, w check valve
Brass shutoff, 1/4 MPT x 5/16 barb, no check valve
Brass shutoff, 1/4 MPT x 1/4 barb, w check valve
Brass shutoff, 1/4 MPT x 1/4 barb, no check valve
Brass shutoff, 1/4 MPT x 3/8 barb, w check valve
Brass shutoff, 1/4 MPT x 3/8 barb, no check valve
Inlet fitting for secondary reg., 1/4" MPT x 1/4" SAE
Outlet fitting with check valve, S 1/4" AE male
Outlet fitting with check valve, 1/4" hose barb
Brass 5/16" barb x 1/4" MPT fitting
Fitting, 1/4" MFL, 1/4" MPT, ball check w adaptor
Brass nipple 1/4 RH MPT x 1/4 LH MPT
1/4" gas hose blue self store
1/4" gas hose yellow self store
78 series coupler with wing-nut for bulk CO2
Cornelius 160 lb CO2 tank mount regulator,
changeover valve, bulk system gauge with
manifold check valve and shutoff
6600
6600C
5153B
5436H
617BN
5436
CO882015
CO882020
CO882028
8100B
8101B
8120B
8121B
8160B
8161B
ST-B78C12-12F
CO882029
08-0564
CO2RS-C
Bulk CO2 reserve kit
CO2 Tank Outside Storage Cabinet
Cabinet provides tank security and improved appearance.
Accommodates all sizes of Chart Beverage outdoor tanks.
Features:
• 60% open surface for cross ventilation
• 2 hinged lockable doors
• Port accommodates 2" conduit connections
• Tabs for bolting unit to concrete
• Removable roof panel protects against harsh weather
• Rustproof aluminum construction
• Powder coated gray primer is ready to paint
• Options: fill valve to fill box connection, vent kit to direct
discharge to the floor
Cabinet comes un-assembled in an easy-to-ship package
preventing damage in transit. Can be assembled on site in
about an hour using screwdriver and small adjustable wrench.
32.6"W x 32.6"D x 76.5"H
Part Number Description
20604733
CO2 tank outside storage cabinet
Tank cabinet
Page D-5
Gas Systems: Regulators, Compressors, Cylinders
Advanced Beverage Solutions
100 Gary Avenue, Suite C
Roselle, IL 60172
CO2 Cylinders
www.absone.com
E-mail: [email protected]
877-814-2271
Local: 847-524-1707
Fax: 847-524-1710
CO2 Cylinder Parts and Accessories
Catalina seamless aluminum alloy compressed gas cylinders
are manufactured in accordance with U.S. DOT 3AL and
TC 3ALM requirements and are stamped with required U.S.
Department of Transportation (DOT) and Transport Canada
(TC) Markings. Every cylinder is inspected and tested by
a DOT and TC authorized independent inspection agency.
Service pressure: 1800 psi / 124 bar.
Part Number
Description
H1BK
H1RD
H2BK
SR1
SR2
22-0016
7431
20020104
20F05-103
20F05-102
20F05-101
Carrying handle black, Catalina
Carrying handle red, Catalina
Carrying handle black, Luxfer
Snap ring, Catalina
Snap ring, Luxfer
CO2 wrench
CO2 changeover kit
Manifold, 3/8 x 1/4 (4)
Gas cylinder bracket, triple, 2"H x 4"W x 37"L
Gas cylinder bracket, double, 2"H x 4"W x 24"L
Gas cylinder bracket, single, 2"H x 4"W x 8"L
Carrying handle Catalina snap ring Luxfer snap ring
22-0016
20F05-101
7431
20F05-102
Part Number
Description
B5
B10
B20
B35
B50
CGA-320
5 lb. / 2.3 kgs. cylinder, Catalina
10 lb. / 4.5 kgs. cylinder, Catalina
20 lb. / 9.1 kgs. cylinder, Catalina
35 lb. / 15.9 kgs. cylinder, Catalina
50 lb. / 22.7 kgs. cylinder, Catalina
Replacement valve
20F05-103
CGA-320
replacement valve
CO2 Purifier
Prevents off-tastes and aromas from spoiling soda and
draft beer due to CO2 contaminants, such as bacteria,
yeasts, molds, and particles from gas (CO2) streams, even
in the presence of humidity and moisture.
Part Number
Description
BCT-2409-ATO
ATO-9SS
BCT-2510-ATO
ATO-10P
2" x 10" stainless steel housing and CO2 filter
Replacement cartridge for BCT-2409-ATO
2" x 10" nylon housing and CO2 filter
Replacement cartridge for BCT-2510-ATO
Page D-6
BCT-2409-ATO
BCT-2510-ATO
Continuing product improvements may necessitate changes without notice. © 2015 ABS
Gas Systems: Regulators, Compressors, Cylinders
Advanced Beverage Solutions
100 Gary Avenue, Suite C
Roselle, IL 60172
www.absone.com
E-mail: [email protected]
877-814-2271
Local: 847-524-1707
Fax: 847-524-1710
Infinity™ Auto Changeover with EasyLink™ Telemetry
Gas Systems: Regulators, Compressors, Cylinders
Advanced Beverage Solutions
100 Gary Avenue, Suite C
Roselle, IL 60172
NEW!
The Infinity™ Auto Changeover senses a depleted cylinder and
automatically switches to the reserve cylinder. Within moments
of the changeover, the supplier will receive an email or text
notification via the EasyLink™ Telemetry system.
Features
• Remote monitoring of cylinder changeover
• Priority Select™ feature allows service personnel to
designate which cylinder is considered primary
• Complete system includes automatic changeover,
hoses and telemetry unit
• Installation is quick and simple
Benefits to Suppliers
•
•
•
•
Eliminates emergency calls
Requires no location involvement
Increases customer loyalty
Optimizes route planning
Infinity™ Auto Changeover
Dimensions: 6”W x 4.6”H x 2”D
Gas Service: Inert
Inlet: 1/4” NPT (2)
Outlet: 1/4” NPT (1)
Safety: Self-resetting 175 psi
Benefits to Customers
• Ensures a continuous supply of gas
• Eliminates the need to change cylinders
• Eliminates the need to call for service
Ordering Instructions
Specify Infinity unit and CGA connections, and include
EasyLink Telemetry monthly fee if applicable.
Note: 2-6 Cylinders may be connected in any configuration
using standard pigtails. Hose assemblies are priced
individually.
Part #
Description
3562
3563
ELE-104P
HKCO-580-1
HKCO-580-2
HKCO-580-3
HKCO-320-1
HKCO-320-2
HKCO-320-3
MTF-100
Infinity Auto Changeover with telemetry Input
Infinity Auto Changeover without telemetry Input
EasyLink telemetry with sim card
Hose assembly single nitrogen cylinder CGA 580
Hose assembly dual nitrogen cylinder CGA 580
Hose assembly triple nitrogen cylinder CGA 580
Hose assembly single CO2 cylinder CGA 320
Hose assembly dual CO2 cylinder CGA 320
Hose assembly triple CO2 cylinder CGA 320
Monthly telemetry fee
EasyLink™ Telemetry
Page D-7
LogiCO2 MK9/MK10 CO2 Detectors/Alarms
www.absone.com
E-mail: [email protected]
877-814-2271
Local: 847-524-1707
Fax: 847-524-1710
NEW!
CO2 is a colorless, odorless gas which normally exists at a concentration of .04% in the air,
but above 4% concentrations has dangerous effects:
• 4% = IDHL - immediate danger to health and life
• 7% = Dizziness, vomiting, headache, reduced blood supply to the brain
• 10% = Convulsions, unconsciousness, death
• 20% = Death in a few seconds
CO2 leaks are costly and dangerous
The MK9 and MK10 are the most cost effective CO2 detection systems currently available.
Four alarm levels fulfill ALL U.S. CO2 safety codes and norms. Central unit makes nonsmelling invisible CO2 gas visible and advises what to do in different alarm situations.
Automatic calibration is safer and zero maintenance. Plug and play components simplify
installation. System is expandable up to eight sensors. System can be connected to an
existing fire alarm system that is connected to the fire department.
Fully Approved
MK10 All-In-One Sensor
The MK10 is a a CO2 monitor for the area CO2 equipment is used or distributed. It has an
integrated sound and light alarm and can be used as a stand-alone unit or can be linked
to a central unit for digital display of values. The MK10 performs self-calibration at regular
intervals, eliminating the need for service calibration.
MK9 Sensor
The MK9 sensor is a precision instrument that continuously monitors temperature and CO2
gas concentration using infrared analysis. It has red, yellow and green LED lights and an
intermittent buzzer for Low Alarm and continuous sound for High Alarm. The MK9 performs
a self-calibration at regular intervals, eliminating the need for service calibration. MK9 is
compatible with MK7.
MK10 Sensor
MK9 CO2 Central Unit
The multi-lingual Central Unit controls the safety system and displays measurements from
up to eight MK9 or MK10 sensors. It is mounted outside the area being monitored, such as a
manger's office. An information and instructional text for all Alert/Alarm and Error conditions
is shown on the display. If multiple sensors are connected, each value indicates which sensor
the value is from. The Central Unit has an alarm memory that remembers and reactivates
any alarm after a power interruption. On the right side there is a sound mute/reset and test
button. The Central Unit can be linked to an existing fire alarm system that is connected to
the fire department.
LED and sound indications...
• Green - the system is active, normal safe conditions
• Yellow - Error
• Red - CO2 concentration alarm: Low >1.5%, or High >3%
• Beeping sound indicates Low Alarm (warning) or Error
• Continuous sound indicates High Alarm (danger)
Horn/Strobe and Warning Beacon
Sensors are mounted 12" from the floor and therefore may not be visible from a distance.
Horn/strobe and waterproof warning beacons are mounted high above sensors to provide
greater visibility and audibility. Additional horn/strobes and beacons can be added.
Cables and Splitters
Red cables and splitters are for power and communication, blue are for warning signaling.
Page D-8
MK9 Sensor
Central Unit
Red Beacon
Horn/Strobe
Red/Blue Cables and Splitters
Continuing product improvements may necessitate changes without notice. © 2015 ABS
Gas Systems: Regulators, Compressors, Cylinders
Advanced Beverage Solutions
100 Gary Avenue, Suite C
Roselle, IL 60172
www.absone.com
E-mail: [email protected]
NEW!
877-814-2271
Local: 847-524-1707
Fax: 847-524-1710
NEW!
LogiCO2 MK9/MK10
CO2 Detectors/Alarms
For more information contact
[email protected]
MK9 Detector Set # 2049
Includes:
MK9 CO2 Central Unit
MK9 CO2 Sensor
Horn/Strobe LED with 3 ft cable
1 Cable red 15 ft
1 Cable red 30 ft
1 Cable blue 15 ft
RJ45 1-1 spliter
RJ45 1-2 spliter
Transformer 1A & Plug - UL
Plug-lock
Bag with 6 screws and plug
CO2 safety monitoring sign
Sign horn/strobe MK9/10
Installation manual MK9
Quick-guide MK9
MK9 Central Unit Specifications:
Operating temp: 0° to 104° F
Operating humidity: 0-95% RH
Power supply: 24V DC
Power usage: No alarm status: 21 mA
Alarm status: 32 mA
Acoustic signal-strength: 80 dBa (1m)
Size (LxWxD): 3.5" x 6.3" x 1.5"
MK10 Detector Set # 2025
Includes:
MK10 CO2 Detector/Alert
Horn/strobe LED with 3 ft cable
1 Cable blue 30 ft
1 Cable red 15 ft
Stainless steel protection bar for Sensor
RJ45 1-1 spliter
Transformer 1A & Plug-UL
Plug-lock
CO2 safety monitoring sign
Sign CO2 Alert
Sign horn/strobe MK9/10
Installation manual MK10
Quick-guide MK10
Optional:
Part # 0328 - MK9 CO2 Central Unit
MK10 Specifications:
Operating temp: 0° to 122° F
Operating humidity: 0-95% RH
Power supply: 24V DC
Power usage: 600 mA peak,
30 mA average
Automatic calibration: 60 days
Weight: 0.88 lbs
Size: 3.54" diameter, height 4.75"
Horn/Strobe Specifications:
Operating temp: 23° to 122°F
Power supply: 18-24V DC
Power usage: 120 mA @ 24V DC supply
Acoustic signal-strength: 110 dB / 1 m
Flash intensity: 115 CD
Flash frequency: 65/min
Size (LxWxD): 5.3" x 4.5" x 2.4"
Total distance between farthest components = less than 980 feet
MK9 Sensor Specifications:
Operating temp: 0° to 104° F
Operating humidity: 0-95% RH
Power supply: 24V DC
Power usage: No alarm status: 56 mA,
Alarm status: 68 mA
Acoustic signal-strength: 76 dBa (1m)
Automatic calibration: 60 days
Size (LxWxD): 3.5" x 6.3" x 1.5"
Horn/Strobe Specifications:
Operating temp: 23° to 122°F
Power supply: 18-24V DC
Power usage: 120 mA @ 24V DC supply
Acoustic signal-strength: 110 dB / 1 m
Flash intensity: 115 CD
Flash frequency: 65/min
Size (LxWxD): 5.3" x 4.5" x 2.4"
Plug and play components
make customization simple
Page D-9
Gas Systems: Regulators, Compressors, Cylinders
Advanced Beverage Solutions
100 Gary Avenue, Suite C
Roselle, IL 60172
LogiCO2 MK9/MK10 CO2 Detectors/Alarms
CO2 Safety System Parts and Accessories
www.absone.com
E-mail: [email protected]
NEW!
Part #
0328
0311
Central Unit
MK9 Sensor
2117
1134
2100
MK10 Sensor/Beacon/Horn
Red Beacon
Horn/Strobe
Extention 1-1
Extention 1-2
Red Cable
Remote Connection to
Fire Alarm System
Blue Cable
Transformer
USB-MODBUS interface
Red Siren
CO2 warning sign
0199
0434
0403
0458
0717
0724
0731
0748
0519
0526
0540
0465
0021
0953
Extension 1-4
877-814-2271
Local: 847-524-1707
Fax: 847-524-1710
BE350G
1240
1257
1264
Description
Central unit add-on kit for MK7/MK9/MK10 system with 30'
red cable, RJ45 1-2 splitter, CO2 Safety System MK9 sign
Central unit for MK7/MK9/MK10 system
MK9 sensor add-on kit for MK7/MK9/MK10 system with
horn/strobe, cables, connectors and signs
MK9 sensor only
MK10 sensor/beacon/horn add-on kit for MK7/MK9/MK10 system
includes horn/strobe, SS protection bar, cables, connectors and signs
MK10 stainless steel protection bar
White horn/strobe
Flash-24-R weather proof LED warning beacon
Red siren for high alarm indication, includes cable
Red cable, 15 ft
Red cable, 30 ft
Blue cable, 15 ft
Blue cable, 30 ft
Cable extension 1-1
Cable extension 1-2
Cable extension 1-4
Remote connection to fire department thru fire alarm system
Transformer 1 amp power supply
USB-MODBUS interface and software to view and log CO2
sensor levels on a computer
Backup power/surge protection, 6 outlets: 3 battery/surge, 3
surge only, Energy Star, $75K equip protection, 3 yr warranty
MK9 central unit sign
MK10 CO2 alert sign
Horn/strobe alert sign
Battery Backup &
Surge Protection
MK10 protection bar
CO2 detection distance = 15 feet radius
Page D-10
Continuing product improvements may necessitate changes without notice. © 2015 ABS
Gas Systems: Regulators, Compressors, Cylinders
Advanced Beverage Solutions
100 Gary Avenue, Suite C
Roselle, IL 60172
www.absone.com
E-mail: [email protected]
877-814-2271
Local: 847-524-1707
Fax: 847-524-1710
ABS Air Compressor and Accessories
Oil-less air compressor with air line filter/regulator:
• Motor: 5/8 HP
• Voltage:110V/60hz
• Output: 2.6 CFM
• Maximum pressure: 100 psi
• Operating pressure: 70-100 psi
• Noise level: 62 decibels
• Tank size: 2 gallons
• Includes filter/regulator with gauge
• Dimensions: 16.5"L x 13"W x 16"H, Weight: 37 lbs.
• Shipping dimensions: 15" x 17" x 18", Shipping weight: 45 lbs.
General Purpose Air Line Filter/Regulator
• 1/4" NPT female in/out ports 0-150 psi gauge
• 1/8" NPT female gauge port
• Maximum pressure 150 psi
• Adjustment range 0-120 psi
• Maximum flow 15 CFM
• 5 micron filter
Automatic Condensate Drain Valve
• Timer specification: interval time 1-120
minutes, adjustable
• Supply voltage: 115V
• Valve specification: type 2/2 way direct acting
• In/out ports: 1/8" NPT female
Part Number
Description
CU012
CU011
CU011-SC
VAL039
VAL038
Oil-less air compressor with filter/regulator
Oil-less air compressor with filter/regulator, auto drain valve and muffler
Suitcase style compressor with auto drain and muffler
General purpose air line filter/regulator
Automatic condensate drain valve
Part Number
Description
82-4428
Air compressor, 6 gallon, oil free
Part Number
Description
99-2201
Air station, wall mount, 115V
Page D-11
Gas Systems: Regulators, Compressors, Cylinders
Advanced Beverage Solutions
100 Gary Avenue, Suite C
Roselle, IL 60172
Aluminum Air Distributors
www.absone.com
E-mail: [email protected]
877-814-2271
Local: 847-524-1707
Fax: 847-524-1710
Senco® Air Compressor
Part #
Description
1741S
1742S
1743S
1744S
1741
1742
1743
1744
1741-1
1742-1
1743-1
1744-1
Aluminum air distributor, 1-way, safety
Aluminum air distributor, 2-way, safety
Aluminum air distributor, 3-way, safety
Aluminum air distributor, 4-way, safety
Aluminum air distributor, 1-way
Aluminum air distributor, 2-way
Aluminum air distributor, 3-way
Aluminum air distributor, 4-way
Aluminum air distributor manifold, 1-way, 1-3/4" long
Aluminum air distributor manifold, 2-way, 3-3/4" long
Aluminum air distributor manifold, 3-way, 5-3/4" long
Aluminum air distributor manifold, 3-way, 7-3/4" long
PC1010, 1 hp (peak), 1/2 hp (running) electric oil-less
compressor is ultra-quiet and ultra-light (only 20 lbs.). Direct
drive induction motor/pump for efficient operation. One gallon
air capacity. 120 psi max output. 1/4" quick disconnect coupler.
Individual gauges for tank and regulated output pressure. CSA
approved. 1 year warranty.
•
•
•
•
•
•
•
SCFM: 90 PSI: 0.7
Pump Up-Time: 0-120 PSI: 128 seconds
Recovery Time: 90-120 PSI: 35 seconds
Max Pressure: 125 PSI
Tank Capacity: 1 gallon
Weight: 20 lbs.
Dimensions: 13"H x 14"L x 10"W
1741-1
1742-1
1743-1
1743-1
1741S
1741
1742S
1742
1743S
1743
1744S
1744
Part Number
Description
0229558
Senco PC1010 oil-less air compressor, 115V
Taprite is a registered trademark of Taprite-Fassco
Mfg., Inc., San Antonio, Texas.
Senco is a registered trademark of Senco Brands, Inc.,
Cincinnati, Ohio.
Catalina Cylinders is a registered trademark of
Catalina Cylinders, Inc., Garden Grove, California.
INFINITY and EasyLink are trademarks of Sterling
Pressure Systems, San Antonio, Texas.
LogiCO2, MK7, MK9 and MK10 are trademarks of
LogiCO2 International AB, Västra Frölunda, Sweden.
Page D-12
Continuing product improvements may necessitate changes without notice. © 2015 ABS
Gas Systems: Regulators, Compressors, Cylinders
Advanced Beverage Solutions
100 Gary Avenue, Suite C
Roselle, IL 60172
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement