TRUMPF TruTops products, TruTops Fab, TruTops Monitor, TruTops Cell, TruTops Unfold, TruTops Calculate, 3D tube construction, TruTops Boost Installation Manual
TruTops products, TruTops Fab, TruTops Monitor, TruTops Cell, TruTops Unfold, TruTops Calculate, 3D tube construction, TruTops Boost - This installation manual provides a detailed overview of the system requirements for a successful installation of the TRUMPF TruTops products.
advertisement
Installation Manual
C332en.doc
TruTops products
Part 1: System requirements
Version 2.05
Installation manual
TruTops products
Part 1: System requirements
Edition:
2015-11-05
Version 2.05
C332en
Order information
Please specify the following when ordering this document:
Installation manual
TruTops products
Part 1: System requirements
Version:2.05
C332en
Address for orders
TRUMPF Werkzeugmaschinen GmbH + Co. KG
Technische Redaktion
Johann-Maus-Straße 2
D-71254 Ditzingen, Germany
Tel.: +49 7156 303-0
Fax: +49 7156 303-30540
Internet: http://www.trumpf.com
E-mail: [email protected]
TRUMPF Werkzeugmaschinen GmbH + Co. KG
Table of contents
1.
2.
General requirements ........................................................ 6
Installation environment ................................................... 8
3.
Operating system .............................................................. 9
3.1
General notes ...................................................................... 9
3.2
Supported operating systems ............................................10
3.3
Installation on virtual systems ............................................12
4.
Database ...........................................................................13
4.1
Microsoft SQL Server ........................................................13
4.2
Backup of data ...................................................................14
6.
7.
5.
Hardware requirements ...................................................15
5.1
Processor ...........................................................................15
5.2
Internal memory .................................................................15
5.3
Screen ................................................................................16
5.4
Graphics card ....................................................................16
5.5
Special system requirements for TruTops Fab
Module Storage .................................................................17
5.6
System requirements for connecting the bar code reader .................................................................................18
5.7
Special system requirements for TruTops Fab in connection with TruTops Fab App .....................................19
5.8
Special system requirements for WebCalculate ................20
5.9
Special system requirements for
TTFMessageService ..........................................................21
5.10
Special system requirements TruTops Boost ....................22
Required hard drive space ..............................................23
Version compatibility ......................................................24
TruTops Fab .................................................................24
3D tube construction .....................................................25
C332en.doc
System_Requirements
Table of contents
5
1. General requirements
Versions
Knowledge
User rights
Restart
The system prerequisites described in this document apply to the following TruTops products and versions:
TruTops product From Version Minimum version required for update
TruTops 2.5.0
TruTops
(CAD, Nest, Laser,
Punch, Tube, Bend)
TruTops Fab
TruTops Monitor
Job Order Interface
6.0
10.0
10.0
9.0
WebCalculate
TruTops Cell
TruTops Unfold
7.0
7.0
4.0
TruTops Calculate
10.0
3D tube construction
1
6.0
4.6
Enhanced shop floor programming
TruTops Boost
1.0
1.0
1.0
1.0
-
All versions
All versions
All versions
All versions
2.0.1
-
Valid versions Table 1
The installation of a TruTops product requires basic knowledge of the operating system and the network structure used.
Local administrator rights are required for installation.
It may be necessary to restart the computer during installation.
Make sure that after restart the same user is logged in as when installation started.
For an installation on a production server, the necessary arrangements need to be made before the server is restarted.
6
General requirements
1
Can only be used together with a full version of TruTops.
System_Requirements
Installation medium
TruTops products are supplied on a DVD-ROM as standard and can be installed directly from this.
Optionally, the DVD content can be copied to a local drive or network drive and installed from there.
In the case of a network installation, the following points must be observed:
The data copied from the DVD must be accessed via a connected network drive (not via a UNC path).
If a new network drive is connected to for installation, make sure that, even after performing a restart, the drive retains the same drive letter assigned to it when installation was started.
The network path must not contain any blanks.
System_Requirements
General requirements
7
2. Installation environment
Virus scanner
Personal fire walls
Network
The use of a virus scanner can lead to a loss in performance during the installation and operation of TruTops products.
We therefore recommend to deactivate the virus scanner during the installation and set it in such a way that live operation of
TruTops products is affected as little as possible (specification of exceptions, full scan outside utilization time, etc.).
In order to guarantee trouble-free operation of TruTops products, the processes will need free access via the fire wall settings.
More specific information regarding files and processes to be enabled will be displayed during the installation and can also be seen in the installation manual.
The network must fulfill the following conditions when being operated in PDM mode or when carrying out network database installation:
Active TCP/IP protocol
Functional name resolution.
Transmission rate at least 100 Mbit/s
If the computer is not being run on the network (e.g. Notebook), the so-called "Microsoft Loopback Adapter" must be installed (see
"Installation manual for TruTops, Part 2: Installation and backup of data").
8
Installation environment
System_Requirements
3. Operating system
3.1 General notes
Server operating system
Service packs
PDM data storage
Use via terminal server
Domain controller
Client applications should not be run on a server operating system.
For a client/server operation with more than 4 clients, a server operating system should be installed on the server computer.
All TruTops products are tested with the current service packs of
document, it will promptly be released. Operability cannot be guaranteed until release.
The following specifications apply for the data storage of PDM data:
If possible, the data should be stored on the PDM server PC.
The hard drive of the data storage must be formatted in the
"NTFS" file system otherwise losses in performance could occur.
PDM data cannot be accessed via SAMBA.
In current versions, TruTops products can be used via Terminal
Server.
2
Installation of TruTops Server on a domain controller is not recommended.
System_Requirements
2
with the exception of TruTops Fab, TruTops Monitor, Job Order Interface option
Operating system
9
3.2 Supported operating systems
Service-Pack
Edition
Bit-Version
TruTops Client
TruTops Server
Enhanced shop floor programming
TruTops Fab/Monitor Client
TruTops Fab Server
TruTops Monitor Server
Job Order Interface
WebCalculate
TruTops Cell Client
TruTops Cell Server
TruTops Calculate Client
TruTops Calculate Server
TruTops Unfold
Tube Design
X
-
X
X
X
X
X
-
-
X
-
Supported operating systems
X
X
O
X
X
X
X
-
X
X
-
Note
The operability of TruTops products is only guaranteed for the versions, editions and service packs listed below. The installation of TruTops products on non-listed and non-approved systems, as well as the installation of non-approved service packs on existing
TruTops installations, is at the user's own risk.
Windows Vista
(discontinued)
Windows 7 Windows 8 and 8.1
3
2008 (also R2)
4
Windows
Server 2012
(also R2)
4
SP 2 or higher
Professional
Business
Enterprise
Ultimate
32bit
X
Ø
6
X
64bit
X
X
SP 1
Professional
Ultimate
Enterprise
Pro
Enterprise
32bit 64bit 64bit
X
X
X
X
X
X
7
Pro
Enterprise
-
-
64bit
-
SP1
Standard
Enterprise
Datacenter
SBSFehler!
Textmarke nicht definiert.
5
32bit 64bit
X
-
X
-
Standard
Datacenter
Foundation
64bit
X
X
-
Key
X
-
X
X
X
X
X
-
-
X
-
X
X
X
X
X
X
X
-
X
X
-
X
X
X
X
X
X
X
-
X
X
-
-
-
-
-
-
-
X
O
X
-
-
-
-
-
-
X
Ø
Ø
-
-
X
-
X = Installation possible and enabled
O = Installation possible but not enabled
Ø = Installation possible but not recommended
- = Installation not possible
X
-
-
-
X
Ø
Ø
X
X
X
X
-
-
-
X
X
Ø
X
X
X
X
Table 2
3
In Windows 7, 8, 8.1 and 10 the EHT converter must be executed with administrator rights when started for the first time.
4
The ".NET Framework" server feature must be activated before installation in the server manager.
5
Small Business Server 2008 and 2011.
6
Up to 3 clients max., due to performance problems.
7
Windows 8 is not supported. Windows 8.1 as of TruTops 4.6.
10
Operating system
System_Requirements
TruTops Boost
Operating system
(64 bit only)
Windows 7
Windows 8
Windows 8.1
Servic e pack
SP 1
Editions
Professional / Ultimate / Enterprise
Pro / Enterprise
Pro / Enterprise
TruTops Boost
Client
X
-
X
Windows 10
SP 1
Pro / Enterprise
Standard / Enterprise / Datacenter /
Small Business Server
SP 1 Standard / Enterprise / Datacenter /
Small Business Server
Standard / Datacenter / Foundation
Standard / Datacenter / Foundation
Operating systems supported by TruTops Boost
Legend
X
-
Ø
Ø
Ø
X
-
X
X
X
X = Installation possible and released
O = Installation possible but not released
Ø = Installation possible but not recommended
- = Installation not possible
TruTops Boost
Server
X
-
X
Table 3
System_Requirements
Operating system
11
3.3 Installation on virtual systems
Support
Licensing
TruTops products can also be operated in a virtual environment
(e.g. VMware Workstation/ESX).
However, due to the numerous variants and basic requirements for virtual systems, operability cannot be guaranteed.
TRUMPF also deals with support requests relating to TruTops products installed in a virtual system environment.
Please note:
TRUMPF is not obliged to provide solutions for problems arising from the operation in a virtual system environment.
If problems arise during operation in a virtual system environment, the customer must prove that the problem has
not arisen due to operation in the virtual system environment.
The TruBend Cell 7000 machine cannot be programmed in a virtual system environment.
TruTops Boost is not released for operation in a virtual system environment in Version 2.
Licenses must not be activated on virtual systems.
We recommend instead , a) to use a real physical computer as license server b) or, if the license server is to be run in a virtual environment, to use the additional "Dongle 2011" (hardware dongle) which can be ordered from our sales department.
12
Operating system
System_Requirements
4. Database
4.1 Microsoft SQL Server
Compatibility
New instance
Installed SQL Server
A version of "Microsoft SQL Server Express Edition" is also installed when the server installation of a TruTops product takes place. Which version
During installation on the server PC, the following points must be observed:
The Microsoft SQL Server 2005 Express Edition tools cannot be installed parallel to the corresponding Microsoft SQL Server
2008 R2 Express Edition tools. If the Microsoft SQL Server
2005 Express tools are installed on the computer, they have to be uninstalled before installing the Microsoft SQL Server 2008
R2 Express Edition.
8
If Microsoft Visual Studio 2008 is installed on the computer, it has to at least be updated with Service Pack 1 before the MS
SQL Server 2008 R2 Express Edition can be installed.
10
The Microsoft SQL Server 2008 R2 Express Edition is installed in its own instance. This ensures that existing SQL Server instances are not affected.
If there is already a TRUMPF product installed on the computer which uses the Microsoft SQL Server 2000/2005/ 2008R2 , the corresponding SQL Server instance ("TRUMPF" or
TRUMPFSQL1) remains installed and running. It can be turned off or uninstalled at any time as long as it is no longer needed by a product.
Microsoft SQL Server 2008 R2 Express Edition is limited to the use of 1 GB RAM maximum.
If an SQL Server 2008 R2 already exists, it can also be used for
TruTops. However, in this case it is also necessary to install a separate TRUMPFSQL1 (or TRUMPFSQL2) instance. For more information please contact TRUMPF CAD/CAM Support.
Microsoft SQL Server 2008
R2 Express Edition with
Tools
Microsoft SQL Server 2014
Express Edition with
Advanced Services
SQL Instance
Depended version of Visual Studio
Special system requirements
Installed with the following products:
TRUMPFSQL1
Visual Studio 2008
-
TRUMPFSQL2
Visual Studio 2010
64bit
TruTops
TruTops Calculation
TruTops Fab
TruTops Monitor Server
TruTops Boost
Table 4
8
This is checked before the installation of the Microsoft SQL Server.
System_Requirements
Database
13
4.2 Backup of data
TruTops Fab Server
Further information
Note
The user alone is responsible for the backup of data, databases, users and the backup of the complete system.
When selecting a data backup software, please bear in mind, that it will need to support the data backup of SQL databases (MS SQL
Server).
The TruTopsFab Server backs up its data in a background service.
The installation manual of the TruTops product contains detailed information on backing up data.
TRUMPF also recommends protecting hardware against power failure by using an uninterruptible power supply (UPS).
14
Database
System_Requirements
5. Hardware requirements
TruTops Fab Module Storage
TruBend Cell 7000
TruTops Boost
Slightly different requirements apply in the case of TruTops Fab
Module Storage (see section 5.5, p.17).
For using the TruBend Cell 7000, the minimum requirements for processor and memory are specified in
“R ecommended
”
.
For TruTops Boost apply special hardware requirements. See section 5.10.
5.1 Processor
A powerful processor of the current generation is recommended for all TruTops products, regardless of the operating mode.
Required Recommended
Client
Intel
®
Core
TM
2 Duo (at least
2.8 GHz) or comparable
Server
AMD Opteron
TM
/Intel
®
Xeon
®
, 2 cores or comparable
Intel
®
Core
TM i5 2.6 GHz or comparable
AMD Opteron
TM
/Intel
®
Xeon
®
, 4 cores or comparable
Table 5 Processors
5.2 Internal memory
Client (single application)
9
Client (multiple applications)
11
Required
2 GB RAM
10
2 GB RAM
TruTops Server (without client)
TruTops Fab/Monitor Server (without client)
2 GB RAM
2 GB RAM
TruTops Fab Server + TruTops Server 3 GB RAM
Recommended
8 GB RAM
8 GB RAM
8 GB RAM
8 GB RAM
8 GB RAM
Internal memory Table 6
Notes
Due to a large number of standard services, Windows Vista tends to have a higher memory usage compared with other systems.
9
10
11 e.g. only TruTops Laser
TruTops Unfold and TruTops Fab Clients can be operated with just 1 GB
RAM
. e.g. TruTops Laser + TruTops Punch
System_Requirements
Hardware requirements
15
16
If multiple technology modules are used simultaneously in
TruTops, the recommended memory capacity should be used.
The 32 bit versions of Windows operating systems have an approximate maximum capacity of only 3 GB RAM.
However, it is still recommended to use 4 GB RAM in 2 x 2 GB modules, as modern mainboards can use the so-called "dualchannel mode" in such a case. This mode enables considerably faster access times.
5.3 Screen
Client
Server
Required
17", 1280x1024
1280x1024
Screen/Resolution
5.4 Graphics card
Recommended
20 ", 1600 x 1200
Table 7
Windows Vista/Open GL
Client PC
Server PC
Some TruTops products (see Table 8, p. 16) require hardware-
based Open GL support via the graphics card (a software emulation is not sufficient). Especially in Windows Vista, check if the graphics card supports this mode. Compatible chip sets can be found on the SolidWorks website (www.solidworks.com).
For TruTops, TRUMPF recommends Nvidia graphic cards, also recommended by SolidWorks. ATI/AMD graphic cards are not supported.
Required Recommended
2 GB Open GL, 3D modes, hardwaresupported
TruTops Cell
TruTops Bend
TruTops Unfold
Tube Design
Other products
1 GB Open GL, 3D modes, hardwaresupported
128 MB
Graphics card/graphics memory
Required
1 GB
Table 8
Minimum resolution 1280x1024
TruTops
Fab/Monitor
Other products
Graphics card
No special requirements.
Table 9
Hardware requirements
System_Requirements
5.5 Special system requirements for
TruTops Fab Module Storage
Server
Virtualization
Only the differences of TruTops Fab Module Storage to the requirements of other TruTops products are listed here. For the remaining points, the requirements of the TruTops products apply.
Before installation, a hard drive partition with the drive letter
"D:" and at least 36 GB of free memory must be available.
In the special case of the server being serially linked to the storage control system, a serial interface (RS-232) is required for each automatically connected storage system.
The following basic requirements apply when using a virtual server:
"VMware ESX" must be used as the virtualization software.
The customer is responsible for "VMware ESX" software support and administration.
The pre-installation of TruTops Fab software with Module
Storage on the ESX server is carried out by TRUMPF via remote diagnostics. Additional assistance at the customer's premises could result in additional costs.
The virtual server must be accessible in the network via a fixed
IP address.
Within the network, the virtual server must be integrated into the domain like a computer.
The virtual TruTops Fab server must be connected to the storage control system via a TCP/IP network connection.
System_Requirements
Hardware requirements
17
5.6 System requirements for connecting the bar code reader
Bar code reader
The bar code reader can be connected via a serial interface (RS-
232) or via a USB interface at the TruTops Fab Client. If you want to use a USB interface, a USB-COM driver must be available for the bar code reader.
The following devices have been tested successfully by TRUMPF:
Datalogic:
Heron D130
Gryphon GD4100
Gryphon GD4400
Honeywell:
Voyager 9540
18
Hardware requirements
System_Requirements
5.7 Special system requirements for
TruTops Fab and TruTops Monitor in connection with TruTops Fab App
TruTops Fab and TruTops Monitor
Mobile devices
Wireless network
Others
Remote Control
Only the differences of TruTops Fab and TruTops Monitor in connection with TruTops Fab App to the requirements of other
TruTops products are listed here. For the remaining points, the requirements of the TruTops products apply.
Windows Server 2008 R2, 2012, 2012 R2
TruTops Fab Server o Module Quickjob. o Optional: Module Customer for customer view.
or:
TruTops Monitor Server
Optional: public (valid) SSL/TLS certificate for the access to the web service on the Microsoft IIS.
Apple iPad, iPhone, iPod touch with iOS 8 or higher.
WiFi-Scanner: Skorpio X3 (with Microsoft Windows Embedded
Handheld 6.5).
Connection to web server (Microsoft IIS in the customer network). A VPN-Connection is required for accessing the web server via internet.
Min. 1MBit bit/s download/upload data transfer rate
Network camera with motion JPEG (MJPEG) support
(optional, the manufacturer AXIS is recommended).
A VPN-Connection is required for accessing the camera via internet. Alternatively the camera must use the same IP-
Address configuration for WLAN and internet.
Machine control with RCI 1.4 or higher.
To use the "Remote Control"
(machine option „MobileControl App“) function of the machine, the following requirements must be fulfilled:
The "MobileControl App" option must be enabled on the machine (not available on all machines).
The machine must be accessible via "Teleservice via internet"
(internet connection via customer network required).
A VPN-Connection is required for accessing from outside the company network.
System_Requirements
Hardware requirements
19
5.8 Special system requirements for
WebCalculate
TruTops Fab server
Web server
Internet connection e-mail transmission
Only the differences of WebCalculate to the requirements of other
TruTops products are listed here. For the remaining points, the requirements of the TruTops products apply.
Version 9.0 or higher.
Windows Server 2008 R2, 2012, 2012 R2
Microsoft IIS (will be installed automatically)
Can be installed on the TruTops Fab server.
Min. 512K bit/s download/upload data transfer rate
see 5.9: special system requirements TTFMessageService.
20
Hardware requirements
System_Requirements
5.9 Special system requirements for
TTFMessageService
We will only list the differences between the TTFMessageService and the requirements of the other TruTops products. In all other cases, the requirements of the TruTops products apply.
The TTFMessageService sends e-mails via an SMTP server. After the TTFMessageService has been installed on a server, you will only need to maintain the SMPT connection data by means of the
TTFMessageConfTool.
TruTops Fab Server
Internet access
Network share
In addition, the required file share will be installed. You will only need to specify the path for the file share (TTFOutbox) on the Fab server. You can find the settings in
CellPM.Nachrichtendienst.Postausgang.
If the SMTP server is not in the internal network (e.g. hosting by provider), the server on which the TTFMessageService is installed, must have access to the internet.
Version 10.x or newer.
Min. 512 Kbit/s download/upload speed
Will be created automatically.
System_Requirements
Hardware requirements
21
5.10 Special system requirements TruTops
Boost
Processor
RAM
Resolution
Graphic card
Hard disk
Mouse
Client
Server
Client
Server
Client
Server
Client
Server
Client
Server
Client
Required
Dual Core
Dual Core
8 GB
8 GB
1280x1024 no special requirements
1 GB DirectX 9C, Shader 2.0, no special requirements
15 GB free memory
15 GB free memory
Mouse with mouse wheel
Server
TruTops Boost hardware requirements no special requirements
Recommended
Quad Core
Quad Core
>=16 GB
>=16 GB
1920x1200 no special requirements
2 GB DirectX 9C, Shader 2.0, no special requirements more than 15 GB free memory more than 15 GB free memory
Mouse with mouse wheel optional SpaceMouse no special requirements
Table 10
22
Hardware requirements
System_Requirements
6. Required hard drive space
Space required for installation
Space required for productive use
The required hard drive space depends on the product installed, the type of installation (client, server), the operating mode (PDM, file system) and the customer data accrued.
The values listed below show the minimum amount of memory required during installation.
Server Client
TruTops
15 GB 2 GB
TruTops Fab/Monitor
TruTops Cell
TruTops Unfold
TruTops Calculate
Tube Design
36 GB
4 GB
-
15 GB
-
1 GB
1 GB
3 GB
2 GB
3 GB
TruTops Boost
15 GB 15 GB
Required hard drive space Table 11
Notes
The memory capacity requirements for database backups
12 have already been taken into account.
When installing client and server or several products on a computer, add the values together.
"MS SQL Server" is always installed on the boot drive and requires approx. 1.5 GB memory. If a server is not installed on the boot drive, the 1.5 GB can be subtracted from the values given in the table. 1.5 GB must, however, be available on the boot drive.
During productive use, in addition to installation files, space is required for user data (e.g. drawings, NC programs, sheet layouts) as well as for the PDM database which increases in size parallel to the user data.
The space requirements depend greatly on the type of saved files.
For example, files from 3D models (TruTops Unfold or TruTops
Cell) require considerably more space than simple GEO files.
For a typical file storage it can be assumed that 100,000 files will require approx. 15 GB memory as a rough average, whereby large deviations above or below this value cannot be ruled out in individual cases.
TruTops Boost will require approximately 75 GB for 100000 3D parts.
System_Requirements
12
The requirements are based on empirical values. The space requirements for large archives may be greater.
Required hard drive space
23
24
7. Version compatibility
TruTops Fab
2.1.0
2.0.1
2.0.0
1.2.x
1.1.1
1.1.0
TruTops
Version
6.0.0
5.0.0
4.0.0
3.x
2.2.0 -
2.9.0
PDM
Version
12.0
11.0
10.0
3.0
2.4
2.3
2.1
2.1
2.1
2.0
2.0
1.0.1
1.0.0
2.0
2.0
TruTops Calculate
10.0.0
9.0.0
8.0.0
7.0.0
6.0.0
4.4.0 - 4.11
TC-CELL
4.0.0
3.3.0
1.10.3
TruTops Boost
TruTops Monitor
TruTops products
Filesystem x x x x x
-
- x
-
-
TruTops Fab / TruTops Monitor and TruTops Boost in version 1 can not be installed together on one computer.
TruTops Fab and TruTops Monitor can not be installed together on one computer.
The following table shows which TruTops Fab version can be used with which TruTops products and versions.
TruTops Fab
11.0.0 10.0.0 9.0.0 8.0.0 7.0.0 6.0.0
–
6.2.0
5.2.0 -
5.9.0
5.1.0
-
- x x
-
-
- x x
-
-
- x x x
-
- x
13 x x
-
- x x x
-
- x
x
-
-
- x
14
x x x x x x x x
-
-
-
-
- x x
-
-
- x x x x
-
-
-
-
-
- x x
-
-
-
- x x x x
-
-
-
-
-
- x
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- x
-
-
-
-
-
-
-
-
-
-
-
- - - -
TruTops Fab/TruTops compatibility
x
-
-
-
-
-
-
-
- x x x x x
-
-
- x
-
-
-
-
-
-
-
-
-
- x x x
-
-
- x x x
-
-
-
-
-
-
-
-
- x x
-
-
- x x x x
-
-
-
-
-
-
-
-
-
-
-
-
-
Table 12
13
14
TruTops Fab Patch 4 or higher required.
Can only be run with updated component “TTFProgService“.
Version compatibility
System_Requirements
3D tube construction
TruTops must be completely installed for 3D tube construction.
The following version dependencies apply here:
TruTops version 3D tube construction
1.2.0 / 1.2.1 / 1.2.2 / 1.2.3 / 1.2.10
1.2.11 / 2.0.0
2.0.1 / 2.0.2
2.1.0
2.1.1
2.2.0 - 2.9.0
3.x.0
4.0.0
4.7.0
5.0.0
6.0.0
1.0.0
1.1.0
1.1.1
1.2.0
1.2.1
1.3.0
2.0.0
3.0.1
4.0.0
5.0.0
6.0.0
Version dependencies for 3D tube construction Table 13
System_Requirements
Version compatibility
25
Index
3
32 bit .............................................................. 15
H
Hard drive space ........................................... 23
Hardware ...................................................... 15
B
Backup of data ............................................... 14
I
Installation environment .................................. 8
Installation medium ......................................... 7
Instance ........................................................ 13
Internal memory ............................................ 15 iPad ............................................................... 19
C
Compatibility .................................................. 24
K
Knowledge ...................................................... 6
D
Database ....................................................... 13
Domain controller ............................................ 9
Dual-channel mode ....................................... 16
M
Microsoft Loopback Adapter ........................... 8
Microsoft SQL Server.................................... 13
E
Enhanced shop floor programming ................. 6
F
File system ....................................................... 9
N
Network drive .................................................. 7
Notebook ......................................................... 8
G
Grafikkarte .........................................18, 19, 20
Graphics card .......................................... 16, 17
O
Open GL ....................................................... 16
Operating system ...................................... 9, 10
26
Version compatibility
System_Requirements
P
Processor ....................................................... 15
T
Terminal server ............................................... 9
Transmission rate ........................................... 8
R
Restart ............................................................. 6
U
User rights ....................................................... 6
S
SAMBA ............................................................ 9
Screen ........................................................... 16
Service packs ............................................ 9, 10
SQL Server .................................................... 13
V
Virtual PC ...................................................... 12
Virtual systems .............................................. 12
Virtualization ........................................... 12, 17
VMware ......................................................... 12
System_Requirements
Index
27
advertisement
Key Features
- System requirements
- Operating system compatibility
- Database requirements
- Hardware specifications
- Version compatibility
- Software compatibility
- Installation environment
