TRUE FS 54 Multi-Press Assembly Manual

FS-54
MULTI-PRESS
ASSEMBLY MANUAL
AM-FS54
010913
A MESSAGE TO OUR CUSTOMERS
Thank you for purchasing products from the Paramount FS line. Because of the many unique
features included in these machines, this manual was created to provide you with information
on how to properly install and maintain your equipment. Proper maintenance will ensure that
your new equipment will last for years.
For your convenience, product questions can be answered by an Authorized Dealer or by
contacting the TRUE Customer Service Department at 1-800-883-8783 or Paramount Service
at 1-800-721-2121.
Office hours are Monday-Friday, 8:30 am - 5:00 pm CST
Or email us at [email protected] or [email protected]
Thank You for your patronage.
TRUE Fitness
865 Hoff Road
O'Fallon, MO 63366
! IMPORTANT
SERIOUS INJURIES TO USERS, BYSTANDERS OR INSTALLERS CAN OCCUR IF THE
INSTRUCTIONS AND WARNINGS CONTAINED IN THIS MANUAL ARE NOT FOLLOWED. TO
MINIMIZE THIS RISK, READ THE MANUAL BEFORE BEGINNING THE INSTALLATION TO
FAMILIARIZE YOURSELF WITH ITS CONTENTS AND THEN BE CERTAIN TO FOLLOW EACH
OF THE STEPS AND PRACTICES DESCRIBED. IN ADDITION, REVIEW THE GENERAL
MAINTENANCE MANUAL, FACILITY SAFETY SIGN AND OTHER DOCUMENTS THAT MAY
ACCOMPANY EACH MACHINE, FOR IMPORTANT SAFETY AND MAINTENANCE TIPS. THE
MANUAL HAS BEEN INCLUDED WITH YOUR MACHINE ORDER AND CAN ALSO BE
DOWNLOADED FROM OUR WEBSITE AT: http://www.truefitness.com
PL E A S E RE T A IN T H I S M A N U A L F O R F U T U R E R EF E R E N C E .
2
TABLE OF CONTENTS
SAFETY...................................................................................................................... 4
GENERAL CARE AND MAINTENANCE...........................................................................
7
DIMENSIONS AND WEIGHT........................................................................................... 8
PREPARATION............................................................................................................. 9
BOX 1 CARTON CONTENTS............................................................................................ 10
BOX 2 CARTON CONTENTS............................................................................................ 11
INSTALLATION & ASSEMBLY
STEP 1: ASSEMBLE THE MAIN FRAME...................................................................... 12
STEP 2: ASSEMBLE THE SEAT FRAME & PADS......................................................... 14
STEP 3: ASSEMBLE PRESS ARM.............................................................................. 16
STEP 4: ASSEMBLE THE WEIGHT STACK................................................................... 17
STEP 5: ASSEMBLE THE CABLE................................................................................ 18
STEP 6: INSTALL THE FRONT SHROUD...................................................................... 20
STEP 7: INSTALL THE REAR SHROUD....................................................................... 21
STEP 8: INSTALL THE TOP CAP................................................................................ 22
STEP 9: INSTALL THE WEIGHT STACK LABEL............................................................ 23
MACHINE LABELS........................................................................................................ 24
SERVICE..................................................................................................................... 25
BOLTING THE MACHINE TO THE FLOOR............................................................................ 26
WARRANTY................................................................................................................. 27
3
SAFETY
FACILITY AND USER SAFETY PRECAUTIONS
1. Review and understand all of the warning labels affixed to this machine and on the facility
safety sign.
2. Be certain that the machine operation is understood before it is used. Refer to the
instructional Procedure Label affixed to the machine.
3. Make sure all users are properly trained on how to use this equipment. If this machine is
being used in a commercial setting, end users may not have access to this Owners Manual. It
is the responsibility of the facility to instruct users as to the proper usage of the equipment as
well as making them aware of potential hazards.
4. Use each machine only for the intended exercise. Do not allow anyone to invent exercises not
included on the Instructional Procedure Label or the Intended Use Label.
5. Do not modify the machine.
6. This equipment meets industry safety standards for stability when used for the intended
exercise. Do not allow straps, resistance bands or other means to be attached to the
framework of this machine to perform stretching or body weight exercises. This can result in
machine instability and lead to serious crushing injuries.
7. Keep children away from this equipment. Adults should closely supervise use by teenagers.
8. It is recommended that users receive a thorough medical exam before commencing an
exercise program. All medical issues should be reviewed to ensure that weight training will
not aggravate pre-existing medical conditions.
9. If the machine appears damaged or inoperable, contact a facility staff member to place an
“OUT OF ORDER, DO NOT USE” sign on the machine until it is repaired. Only use Paramount
supplied replacement components to service this machine.
10. Instruct users not to wear loose or dangling clothes or have headphone wires hanging when
using this equipment.
11. Do not attempt to free any jammed assemblies by yourself as this may cause injury.
12. On Plate Loaded and Free Weight machines:
12a. Use of spotter(s). Instruct users to seek the advice of the facility staff as to the
appropriate use of spotters when lifting. More then one spotter may be required
depending upon the amount of weight being lifted.
12b. Instruct users to load weight plates evenly and carefully (one side and then the other)
to avoid tipping equipment and crushing injuries.
12c. If the machine is equipped with safety stops or catches, inspect them and verify their
proper operation before use and make sure they are securely in place before using or
exiting the machine. Be certain members are instructed on how to operate and adjust
all safety mechanisms.
4
SAFETY
12d. This equipment is designed for standard olympic size weight plates with a 50mm bore
(1.9”).
12e. Do not exceed the maximum weight capacity of the machine. Maximum plate size is
45 lbs. (25 kg.).
13. On Selectorized and Cable equipped machines:
13a. Do not allow users to perform any exercise by holding the end of the cable and/or the
cable end fitting. Use only appropriate handles or attachments properly connected to
the cable end.
13b. Do not high-pin or double-pin the weight stack. Do not allow the machine to be used if
the top plate or weight stack is pinned in a raised position. Use an assistant and
carefully return the machine to the proper position with the cap plate resting on the top
weight. Inspect the entire length of the cable to ensure that it is properly seated in all
of the pulley grooves.
13c. Do not allow the use of weight plates or dumbbells to be used as a means to add
additional weight to the weight stacks. Use only the Paramount adder weight system
specifically designed for the machine.
INSTALLATION SAFETY PRECAUTIONS
1. Read this Installation Manual entirely before assembling this equipment.
2. Verify that there is adequate space surrounding this piece of equipment for safe access and
operation. Installation must meet ADA requirements for accessibility.
3. Install this piece of equipment on a solid level surface that does not deviate more then 1/8”
over a 10’ distance (or as defined and required by local building and architectural codes.
4. Paramount strongly recommends that all equipment be anchored to the floor to prevent
movement and increase stability.
• Due to the wide variation of flooring on which the unit can be installed, contact a
qualified contractor to determine an appropriate fastening system for your floor.
• Use 3/8” diameter hardware (10 mm) to anchor the machine. Anchors should have a
minimum pull out force of 220 lbs (110 kgs) for each position.
• When attaching the machine to the floor, if there is a gap between the machine foot
and the floor, do not use the anchor to remove the gap as this can cause the
machine frame to deform. Instead, place a shim between the bottom of the foot and
the floor, then tighten the anchor.
• Anchoring holes are provided on the feet of the frame. All anchoring locations must
be used when anchoring the equipment to the floor.
5. DO NOT install any fitness equipment near a pool, hot tub or other damp locations. Corrosion
caused by installation in these locations can lead to premature failure of components.
6. Be sure all hardware is tight before using this machine.
5
SAFETY
MAINTENANCE SAFETY PRECAUTIONS
1. Refer to Maintenance Schedule label on the machine as well as this manual for when to
perform maintenance.
2. Check the function of your machine DAILY by verifying the following:
• Inspect cables and end fittings for any signs of wear. Replace if worn, frayed or
damaged with original Paramount replacement components.
• Verify that all adjustments are possible and carried out with ease. Make sure that
each adjustment pin inserts completely into each position without binding.
• Verify that safety catches and stops are in proper working order and engaged.
• Verify that the exercise is performed smoothly, free of noise and/or binding.
• If equipped with a weight stack, verify that the proper weight selector pin is in place.
3. Check the function of your machine WEEKLY by verifying the following:
• Nuts, Bolts, and Fasteners: Check tightness weekly. If any hardware has become
loose, retighten and/or use Loctite™ Threadlocker 242.
• Frames and Lifting Arms: Inspect weekly for integrity and function. Replace any
component at first signs of wear. Use only Paramount supplied components.
4. Replace any warning label at first sign of wear. Labels and the Facility Safety Sign may be
obtained from Paramount free of charge.
BOLT LENGTH MEASURING GUIDE
FLAT HEAD SCREW
BUTTON HEAD SCREW
HEX HEAD SCREW
SOCKET HEAD SCREW
1
2
3
6
4
5
GENERAL CARE AND MAINTENANCE
IMPORTANT
Preventative maintenance is crucial to maintaining the function and safety of this equipment. Your
facility must establish written guidelines for preventative maintenance and keep written or online
records of the maintenance performed on these products. As a minimum, the items presented in
the SAFETY section of this document and the items that follow here, should be included in your
maintenance program.
1. Cables: Inspect end fittings daily for wear. Inspect the entire length of the cable weekly.
Replace cables at the first sign of wear and on an annual basis. If the cable tension has
been adjusted, be certain that the cable nut is tight.
2. Nuts, Bolts, and Fasteners: Check tightness weekly. If any hardware has become loose,
retighten and/or use LoctiteTM brand Threadlocker 242. Be sure all hardware is tight
before using the machine.
3. Safety Catches: Inspect catches, stop rods and their associated fasteners weekly. Tighten
any loose hardware and replace any components at first signs of wear.
4. Frames: Wipe all machines down with a damp cloth and dry completely each day. This
includes painted parts, chrome parts and upholstered pads.
5. Painted and chrome plated parts: Use Simple Green or similar cleaner for light dirt and
grime. Use Turtle Wax Polishing Compound or a good car polish to remove heavier dirt
and grease as well as for polishing. DO NOT use solvents, lacquer thinner, acetone or
finger nail polish remover. For scuffs and marks that are not removed by the above
methods use a soft scrub cleanser. Make sure all parts are dry upon completion.
6. Weight stack enclosures (shrouds): Wipe down with a damp cloth as needed.
7. Exercise instruction labels: Clean with soap and water as needed.
8. Guide rods: Wipe all dirt and dust from the guide rods before applying a light application
of Tri-FlowTM or other teflon spray lubricant. Spray the Tri-FlowTM on a rag and then wipe
the guide rods with the rag. DO NOT use oil lubricants such as WD-40. Caution: Tri-FlowTM
will stain carpet and clothing.
9. Bronze bushings: Check monthly for signs of wear and replace as needed.
10. Linear Bearing Shafts: Wipe any accumulation of dust or other contaminants from the
shafts on a weekly basis. Apply a thin layer of a Teflon® (PTFE) grease on a weekly basis.
Paramount recommends Magnalube® brand.
11. When replacing any component, use only Paramount supplied parts.
12. Please refer to the General Maintenance Manual (part number: AM-GMM) for other
important safety and maintenance information.
13. Be sure all hardware is tight before using the machine.
Retain these instructions for future reference.
If you have any questions, do not hesitate to contact your Paramount dealer or TRUE Fitness at
(800) 883-8783 or (800)721-2121 or [email protected] or
[email protected]
7
DIMENSIONS AND WEIGHT
“IN USE” MACHINE DIMENSIONS
MACHINE WEIGHT AND FLOOR LOADING
WEIGHT STACK CONFIGURATION
MACHINE WEIGHT
APPROXIMATE FLOOR LOADING
170 lbs.
470 LBS [213 KG]
46 LBS/FT2 [227 KG/M2]
250 lbs.
550 LBS [249 KG]
54 LBS/FT2 [265 KG/M2]
Maximum user weight is 300 Lbs. (136 KG.)
8
PREPARATION
REQUIRED TOOLS
Ratchet Wrench and Socket:
9/16”
Wrenches: 9/16”, 3/4”
(or an adjustable crescent wrench).
Rubber mallet and steel hammer
Allen wrenches: (included with the machine)
Weight Plate Cartons
Depending upon your order, this machine can be assembled with either a 170 lb. or 250
lb. weight stack. For a 170 lb. weight stack, (4) cartons of 10 lb. plates are required. For a
250 lb. weight stack, (4) cartons of 15 lb. plates are required.
See below for weight stack options/requirements:
10 LB. Weight Plate Box
Part Number: B1602
Comprised of
(4) x 10 lb. Weight Plates
15 LB. Weight Plate Box
OR
Part Number: B1603
Comprised of
(4) x 15lb. Weight Plates
Hardware Measurement Guide:
BHCS - BUTTON HEAD CAP SCREW
SHCS - SOCKET HEAD CAP SCREW
FHCS - FLAT HEAD CAP SCREW
HHCS - HEX HEAD CAP SCREW
1
2
MEASURE BOLT
FROM HERE
9
3
4
5
BOX 1 CARTON CONTENTS
3
ITEM
PART NUMBER
DESCRIPTION
QTY
1
FS54-UPR-000X
FRAME, UPRIGHT
1
2
FS54-SHD-100X
SHROUD, FRONT
1
3
FS-SHD-150X
SHROUD, REAR
1
4
FS-GRD-100X
GUIDE ROD ASSEMBLY
2
5
FS-BKT-000
GUIDE ROD BRACKET
2
6
FS-WSB-000
WEIGHT STACK BASE
2
7
FS-CAP-000X
TOP CAP
1
8
FS-BKT-001
BRACKET, TOP CAP
2
9
FS54-PAD-100X
PAD, SEAT
1
10
FS54-PAD-000X
PAD, BACK
1
4
1
2
7
6
8
5
10
9
10
BOX 2 CARTON CONTENTS
PART NUMBER
DESCRIPTION
1
FS54-ARM-000X
PRESS ARM ASSEMBLY
1
2
FS54-ARM-100X
LOAD ARM ASSEMBLY
1
3
FS54-MFR-000X
BASE, MAIN FRAME
1
4
FS54-MFR-100X
REAR, MAIN FRAME
1
5
FS54-MFR-200X
PIVOT, MAIN FRAME
1
6
FS54-MFR-300X
CONNECTOR, MAIN FRAME
1
7
FS54-MFR-400X
BRACE, MAIN FRAME
1
8
FS54-MFR-001
PLATE, CONNECTOR
1
9
FS54-AXL-000X
AXLE, 8-5/8” LG (220mm)
1
10
FS54-AXL-100X
AXLE, 9-3/8” LG (237mm)
1
11
FS54-SFR-000X
RAIL, CHROME
1
12
FS54-SFR-100X
SEAT ROLLER ASSEMBLY
1
13
FS54-SFR-200X
FRAME, BACK PAD
1
14
FS54-SFR-300X
STRUT, BACK PAD FRAME
2
15
FS54-HWR-000X
HARDWARE BOX
1
16
FS-SBR-000X
TOP PLATE/SELECTOR BAR
1
ITEM
15
13
16
7
QTY
1
8
3
2
9
5
6
10
14
4
12
11
11
STEP 1: ASSEMBLE THE MAIN FRAME
1. Before connecting the frame to the
upright, route the cable through the
upright and frame as shown.
ITEM
PART NUMBER
DESCRIPTION
1
FS54-UPR-000X
UPRIGHT FRAME
1
2
FS54-MFR-000X
BASE, MAIN FRAME
1
3
FS54-MFR-100X
REAR, MAIN FRAME
1
2. Assemble frame components as
shown.
QTY
4
FS54-MFR-001
PLATE, CONNECTOR
1
3. Loosely assemble ALL hardware
shown in this step.
5
FS54-MFR-200X
PIVOT, MAIN FRAME
1
6
FS54-MFR-300X
CONNECTOR, MAIN FRAME
1
4. DO NOT FULLY TIGHTEN ANY
HARDWARE FROM THIS STEP.
7
FS54-MFR-400X
BRACE, MAIN FRAME
1
8
S 550
FOOT, MOLDED
6
5. Install the rubber feet.
9
C 955A
BASE, BOLT COVER
13
10
C 955S
COVER, BOLT
13
11
C 754C
WASHER, FLAT, 3/8
13
12
C 749
WASHER, LOCK, 3/8
15
13
C 766A
NUT, NYLOCK, JAM, 3/8
2
14
C 623
SCREW, SOCKET HD, 3/8 X 1
4
15
C 445
SCREW, HEX HD, 3/8 X 1
11
16
C 678
SCREW, BUTTON HD, 3/8 X 1
2
1
A
$
5
7
(E
ROUTE CABLE
THROUGH
FRAME FIRST
B
%
6
2
4
12
C
&
3
8
D
'
STEP 1: ASSEMBLE THE MAIN FRAME
10, 15, 12, 9, 11
10, 15, 12, 9, 11
DETAIL
'(7$,/(E
14, 12
'(7$,/$A
DETAIL
DETAIL
'(7$,/% B
10, 15, 12, 9, 11
'(7$,/' D
DETAIL
16, 12
10, 15, 12, 9, 11
10, 15, 9, 11
10, 13, 9, 11
'(7$,/& C
DETAIL
13
STEP 2: ASSEMBLE THE SEAT FRAME & PADS
1. Assemble the Chrome Rail and
Seat Assembly to the frame as
shown. TIGHTEN BOLTS IN DETAIL
“I” FIRST. Then tighten all
remaining bolts.
2. Assemble the Back Pad Frame and
Back Pad Frame Struts.
3. Assemble the Seat Pad and Back
Pad.
ITEM PART NUMBER
1
FS54--SFR-100X
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
FS54-SFR-000X
FS54-SFR-200X
FS54-SFR-300X
FS54-PAD-000X
FS54-PAD-100X
C 955A
C 955S
C 447
C 448
C 450
C 451
C 678
C 754C
C 749
C 750
C 766A
C 787
C 754C
C 695A
DESCRIPTION
QTY
SEAT ROLLER ASSEMBLY
RAIL, CHROME
FRAME, BACK PAD
STRUT, BACK PAD FRAME
PAD, BACK
PAD, SEAT
BASE, BOLT COVER
COVER, BOLT, SILVER
SCREW, HEX HD, 3/8 X 1-1/2
SCREW, HEX HD, 3/8 X 1-3/4
SCREW, HEX HD, 3/8 X 2-1/2
SCREW, HEX HD, 3/8 X 2-3/4
SCREW, BUTTON HD, 3/8 X 1
WASHER, FLAT, 3/8
WASHER, LOCK, 3/8
WASHER, LOCK, 1/2”
NUT, NYLOCK, JAM, 3/8
NUT, ACORN, M12
WASHER, LARGE DIAMETER
SCREW, SHOULDER, M16 X 100
1
1
1
1
1
1
11
11
3
2
2
2
4
11
11
2
2
1
4
1
3
G
*
5
TIGHTEN THESE
BOLTS FIRST.
H
+
6
I,
2
4
1
14
STEP 2: ASSEMBLE THE SEAT FRAME & PADS
8, 11, 15, 7, 14
8, 12, 15, 7, 14
TIGHTEN THESE
BOLTS FIRST.
'(7$,/, I
DETAIL
'(7$,/*G
DETAIL
8, 10, 7, 14
18, 16, 16
13, 15, 19
4 PLACES
8, 17, 7, 14
8, 9, 15, 7, 14
3 PLACES
8, 12, 15, 7, 14
20
'(7$,/+H
DETAIL
15
TIGHTEN THESE
BOLTS FIRST.
STEP 3: ASSEMBLE PRESS ARM
1. Assemble the Load Arm and Axle
as shown (Make sure to use the
shorter axle).
2. Assemble the Press Arm and Axle
as shown (Make sure to use the
longer axle.
4. Fully tighten the cap screws to
retain the axles and install the
end caps.
PART NUMBER
DESCRIPTION
1
FS54-ARM-000X
PRESS ARM ASSEMBLY
1
2
FS54-ARM-100X
LOAD ARM ASSEMBLY
1
3
FS54-AXL-000X
AXLE, 8-5/8” LG (220 MM)
1
4
FS54-AXL-100X
AXLE, 9-3/8” LG (237 MM)
1
5
FS-CAP-003
END CAP, 30 X 70
2
6
FS-CAP-004
END CAP, 40 X 80
2
7
C 623
SCREW, SOCKET HEAD, 3/8 X 1
4
ITEM
NOTE: This axle is the
longer one of the two.
4
7
3
5
6
7
'(7$,/. K
DETAIL
1
.
K
2
16
7
QTY
STEP 4: ASSEMBLE THE WEIGHT STACK
1. Install the Weight Stack Supports, Weight ITEM PART NUMBER
Stack Bumpers, Weight Stack Washers,
1
FS-WSB-000
and Guide Rods.
2. Install 16 weight plates according to your
order (10 or 15 lb. plates).
3. Assemble Top Plate/Selector Bar and
collars. Set height of collars as shown.
DESCRIPTION
QTY
WEIGHT STACK BASE
2
2
C 757A
WASHER, WEIGHT STACK
2
3
FS-BMP-001
BUMPER, WEIGHT STACK
2
4
WGT. PLATE
10# OR 15# WEIGHT PLATE
16
5
FS-SBR-000X
TOP PLATE/SELECTOR BAR
1
6
FS-GRD-100X
GUIDE ROD ASSEMBLY
2
4. Attach guide rod to top frame with Guide
Rod Bracket as shown.
7
FS-BKT-000
GUIDE ROD BRACKET
2
8
C 445
SCREW, HEX HEAD, 3/8 X 1
2
8, 9, 10
9
C 749
WASHER, LOCK, 3/8
2
10
C 754C
WASHER, FLAT, 3/8
2
11
D840
COLLAR, CLAMPING, 1”
2
7
SET COLLARS TO
4” [100 MM]
DETAIL L
'(7$,//
11
L/
6
5
4
2
3
1
17
STEP 5: ASSEMBLE THE CABLE
1. Starting at the top plate, assemble the
cable as shown, installing pulleys and
hardware as you go.
2. Tighten the cable adjustment bolts to
the remove slack from the cable.
3. Ensure that the adjustment bolts are
inserted into the selector bar and the
frame connection according to the
minimum dimension specification
shown (1-3/8”).
ITEM
PART NUMBER
DESCRIPTION
1
FS54-CBL-100X
CABLE, MULTI PRESS
1
2
C 955A
BASE, BOLT COVER
5
3
C 955S
COVER, BOLT, SILVER
5
4
C 754C
WASHER, FLAT, 3/8
9
5
C 749
WASHER, LOCK, 3/8
1
6
C 766A
NUT, NYLOCK, JAM, 3/8
4
7
C 448
SCREW, HEX HEAD, 3/8 X 1-3/4
5
8
B 900
PULLEY, 4-1/2” DIAMETER
4
10
B 898
PULLEY, 6” DIAMETER
1
11
FS-SPN-000X
SELECTOR PIN
1
A
QTY
E
1
B
C
D
18
STEP 5: ASSEMBLE THE CABLE
3, 7, 2, 4
6, 4
7, 4
DETAIL E
8
3, 6, 2, 4
M AX
1” (25mm)
10
8
INSTALL SELECTOR
PIN RING AROUND
CABLE BOLT
AS SHOWN
DETAIL A
3, 7, 2, 4
8
3, 7, 5, 2, 4
3, 6, 2, 4
8
DETAIL B
DETAIL C
7, 4
9
DETAIL D
19
6, 4
STEP 6: INSTALL THE FRONT SHROUD
1. Assemble the front shroud as
shown.
2. Operate the machine and make
sure that the weight stack clears
the shroud. Adjust the position if
required.
ITEM
PART NUMBER DESCRIPTION
QTY
1
FS54-SHD-100X SHROUD, FRONT
1
2
C 754C
WASHER, FLAT, 3/8
4
3
C 749
WASHER, LOCK, 3/8
4
4
C 445
SCREW, HEX HEAD, 3/8 X 1
4
A
4, 3, 2
DETAIL A
B
1
4, 3, 2
DETAIL B
20
STEP 7: INSTALL THE REAR SHROUD
1. Assemble the rear shroud as
shown.
2. Operate the machine and make
sure that the weight stack clears
the shroud. Adjust the position if
required.
ITEM
PART NUMBER DESCRIPTION
QTY
1
FS-SHD-150X
SHROUD, REAR
1
2
C 754C
WASHER, FLAT, 3/8
4
3
C 766A
NUT, NYLOCK, JAM, 3/8
2
4
C 444
SCREW, HEX HEAD, 3/8 X 3/4
2
4, 2
3, 2
A
$
'(7$,/$ A
DETAIL
1
B
%
'(7$,/%
DETAIL
B
DETAIL
A
21
STEP 8: INSTALL THE TOP CAP
1. Assemble the bracket to the top
cap as shown.
2. Assemble the top cap to the
upright frame.
ITEM
PART NUMBER DESCRIPTION
QTY
1
FS-CAP-000X
TOP CAP
1
2
C 675D
SCREW, BUTTON HEAD, 1/4 X 1/2
8
3
FS-BKT-OO1
BRACKET, TOP CAP
2
2
3
2
A
1
2
DETAIL A
22
STEP 9: INSTALL THE WEIGHT STACK LABEL
1. Select the appropriate weight stack label(s) according to your order. You can install pound
labels, kilogram labels, or both.
2. If you ordered a 170 lb. weight stack, use labels:
LBL-WSE-01170 (for pounds)
LBL-WSM-01170 (for kilograms).
3. If you ordered a 250 lb. weight stack, use labels:
LBL-WSE-01250 (for pounds)
LBL-WSM-01250 (for kilograms).
4. Remove the backing from the label to expose the adhesive. Carefully locate the label on the
shroud so that it is centered between the edge and the bend. Line up the numbers with their
corresponding weight plate. Once the correct position is attained and the label is a uniform
distance from the edge, press firmly along the entire length of the label.
5. NOTE: Adhesive takes 24 hours to fully set.
INSTALL LABEL HERE
OR HERE
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
23
MACHINE LABELS
The following are the Warning labels required for this FS machine. If any of these
labels are missing or become damaged, we will replace them free of charge.
Note: these labels are not to scale.
! WARNING
MAXIMUM
Height Under Nut
to Bolt Head.
MAKE SURE
locking nut is tight.
!
WARNING
SERIOUS INJURY CAN OCCUR
ON THIS EQUIPMENT IF THE
CABLES AND THEIR ATTACHMENT COMPONENTS ARE NOT
INSPECTED OFTEN. REPLACE
AT FIRST SIGNS OF WEAR.
MAX
1”
P/N B2051
B2141C
B2051
B2141C
LBL-WSE-01170 (170 LB)
LBL-WSE-01250 (250 LB)
LBL-WSM-01170 (77 KG)
LBL-WSM-01250 (114 KG)
LBL-WRN-0002
!
WARNING
SERIOUS INJURY CAN OCCUR ON
THIS EQUIPMENT IF THE PIN IS NOT
COMPLETELY INSERTED BEFORE USE.
LBL-PR-FS54
P/N B2065
ASTM F1749
B2065
BE ALERT!
THE FITNESS EQUIPMENT IN THIS FACILITY
PRESENTS HAZARDS WHICH, IF NOT AVOIDED,
COULD CAUSE SERIOUS INJURY OR DEATH.
If this machine is to be installed in a
public use facility, ASTM F1749
requirements specify that the facility
sign shown to the right is to be
installed in plain view.
PRIOR TO USING THE EQUIPMENT, READ THE WARNING LABELS
AND INSTRUCTION PLACARDS AFFIXED TO EACH MACHINE.
IF YOU ARE UNSURE ON HOW TO USE A MACHINE, SEEK THE
ASSISTANCE OF OUR FLOOR PERSONNEL. WE WILL BE HAPPY
TO INSTRUCT YOU ON HOW TO USE THE EQUIPMENT PROPERLY.
IMMEDIATELY REPORT ANY PIECE OF EQUIPMENT THAT IS NOT
FUNCTIONING PROPERLY TO OUR FLOOR PERSONNEL SO THAT
IT MAY BE EVALUATED AND SERVICED PROMPTLY.
If you did not receive the facility sign
with your order, you can obtain one
free of charge by calling
1-800-883-8783 or
1-800-721-2121.
DO NOT ATTEMPT TO USE OR FIX ANY PIECE OF EQUIPMENT
THAT IS NOT FUNCTIONING PROPERLY
ASTM F1749-96
24
SERVICE
HOW TO OBTAIN SERVICE
For warranty service, contact an Authorized Paramount Dealer or a TRUE Fitness
Customer Service representative at 1-800-883-8783 or 1-800-721-2121. You can also
email us at [email protected] or [email protected]
Before you call, please have the following information ready:
• Model Number: FS-54
• Serial Number: ________________________
• Date of Installation: ____________________
• A brief description of the problem
The serial number is located on the front of the upright
frame at the bottom as shown.
Serial Number
FINAL CHECK
1. If you haven’t already done so, lubricate the guide rods and seat adjustment tubes with
a teflon spray lubricant. Paramount recommends using TriFlowTM brand.
2. Verify that all adjustments can be made into each position and that the adjustment pin
is fully engaged.
3. Place the selector pin into the holder on the cap plate. Perform the exercise slowly.
Verify that the cable moves freely, without any binding. Repeat this procedure for each
exercise on the machine.
4. Verify that the selector pin can be inserted into each weight plate.
25
FS BOLT DOWN INSTRUCTIONS
The machines in this product line were designed and tested to meet the ASTM (American) and EN
(European) safety standards for stability (without floor anchors) when the machine is used for it’s
intended purpose as designated by the manufacturer.
However, Paramount strongly recommends that all equipment be anchored to the floor to prevent
movement and increase stability.
• You will need to order an anchoring kit for each machine. This kit will include brackets and
instructions for securing the brackets to the machines. Note: the kit does not include the
floor anchor bolts. Order part number: FS-BLTDN-000X, 1 kit per FS machine.
• Due to the wide variation of flooring on which the unit can be installed, contact a qualified
contractor to determine an appropriate fastening system for your floor.
• Use 3/8” diameter hardware (10 mm) to anchor the machine. Anchors should have a
minimum pull out force of 220 lbs (110 kgs) for each position.
• When attaching the machine to the floor, if there is a gap between the machine foot (or
bracket) and the floor, do not use the anchor to remove the gap as this can cause the
machine frame to deform. Instead, place a shim between the bottom of the foot and the
floor, then tighten the anchor.
Floor Anchor Point
Floor Anchor Point
Main frame hold down bracket
(included in kit, qty 1)
Re-uses existing machine
hardware. Refer to kit instructions
for details.
Upright hold down brackets with hardware
(included in kit, qty 2)
26
PARAMOUNT LIMITED WARRANTY
READ PARAMOUNT’S WARRANTY SET FORTH BELOW PRIOR TO USING PARAMOUNT PRODUCTS. BY INITIAL USE OF PARAMOUNT
PRODUCT YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS. THE WARRANTY
PERIODS COMMENCE ON THE INVOICE DATE OF THE ORIGINAL PURCHASE. LABOR COVERED DURING WARRANTY PERIODS
REQUIRES PRIOR AUTHORIZATION OF PARAMOUNT. PARAMOUNT WARRANTS TO THE ORIGINAL BUYER OF ALL NEW EQUIPMENT
PURCHASED FROM A PARAMOUNT AUTHORIZED DEALER OR FROM A PARAMOUNT AUTHORIZED MANUFACTURING CONTRACTOR
THAT THESE PRODUCTS WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE AND SERVICE FOR
THE FOLLOWING PERIODS AND IN THE FOLLOWING RESPECTS:
STRENGTH PRODUCTS
• TEN YEAR WARRANTY COMMERCIAL PRODUCTS – Frame Components and Welds excluding coatings
• FIVE YEAR WARRANTY - Bronze Bushings, Sealed Rotating Bearings, Pulleys, Weight plates and Guide Rods excluding coatings
• ONE YEAR WARRANTY - Cables, Linear Bearings and Shafts and all other components not mentioned elsewhere in this
warranty
• 90-DAY WARRANTY - Normal wear parts including but not limited to labels, upholstered pads and grips
• ONE YEAR WARRANTY – Labor
THE SHIPPING MODE OF PARTS REPLACED UNDER WARRANTY TO BE DETERMINED BY PARAMOUNT. PARTS REPLACED UNDER
WARRANTY CARRY THE REMAINING ORIGINAL WARRANTY PERIOD OR 90 DAYS, WHICHEVER IS LONGER.
THIS LIMITED WARRANTY DOES NOT COVER AND NO WARRANTY IS GIVEN WITH RESPECT TO:
• Products not manufactured by Paramount or by an Authorized Paramount Manufacturing Contractor.
• Products which are altered without the express written consent of Paramount.
• Products purchased other than directly from Paramount or through a Paramount Authorized Dealer.
• Defective paint, chrome and other coatings caused by environmental conditions including but not limited to climate conditions,
cleaning materials and moisture or humidity coming from HVAC systems.
• All parts including but not limited to frames with cosmetic damage. Such damage includes but is not limited to scratches and
dents caused after the initial installation.
• Products not maintained in compliance with Paramount’s specifications as shown in the owners’ manual and on product
labels.
• Products with a missing, unreadable or altered serial tag.
• Labor for components beyond their warranty coverage.
• On site service calls to solve installation errors or to provide technical training on the proper use and servicing of the equipment.
THIS WARRANTY APPLIES UNDER THE FOLLOWING CONDITIONS.
• These products have not been subjected to misuse, abuse, modifications not authorized by Paramount or any damage caused
by improper handling, natural disasters, acts of God or servicing by non-Authorized Dealers. This includes but is not limited to
the relocation of the product and the application of cleaning materials or lubricants not specified by Paramount.
• These products remain in possession of the original purchaser.
• Warranty claims are made within the warranty periods previously shown and that such claims occur within 30-days after the
date of discovery.
• Labor coverage applies only within the United States and Canada.
• Warranties for parts and labor may vary outside the United States. Contact the Paramount Dealer within your geographic area
for warranty terms.
THE OBLIGATION OF PARAMOUNT UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING WARRANTED DEFECTIVE
PARTS, AS PARAMOUNT MAY ELECT, AT PARAMOUNT'S PLANT IN LOS ANGELES, CALIFORNIA. PURCHASER IS RESPONSIBLE FOR
ALL TRANSPORTATION AND INSURANCE COSTS ON RETURNED OR REPLACED EQUIPMENT TO AND FROM PARAMOUNT'S PLANT IN
LOS ANGELES. ANY IMPLIED WARRANTY, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE AND THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO ONE-YEAR DURATION FROM THE DATE
OF DELIVERY TO THE ORIGINAL PURCHASER. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THE REMEDY OF REPAIR AND REPLACEMENT IS THE EXCLUSIVE AND
SOLE REMEDY OF THE PURCHASER.
PARAMOUNT SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
INCLUDING, BUT NOT LIMITED TO, DAMAGE OF LOSS OF PROPERTY OR EQUIPMENT AND LOST PROFITS AND REVENUE. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. NO ACTION FOR BREACH OF THIS WRITTEN LIMITED WARRANTY OR AN
IMPLIED WARRANTY SHALL BE COMMENCED MORE THAN ONE YEAR AFTER THE ACCRUAL OF THE CAUSE OF ACTION. THIS
WRITTEN LIMITED WARRANTY IS THE COMPLETE, FINAL AND EXCLUSIVE AGREEMENT OF THE PARTIES WITH RESPECT TO THE
QUALITY OR PERFORMANCE OF THE GOODS AND ANY AND ALL WARRANTIES AND REPRESENTATIONS. NO MODIFICATIONS OF
THIS LIMITED WARRANTY OR WAIVER OF ITS TERMS SHALL BE BINDING ON EITHER PARTY UNLESS APPROVED IN WRITING BY AN
AUTHORIZED CORPORATE OFFICER OF PARAMOUNT. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH MAY VARY, FROM STATE TO27
STATE. CONTACT PARAMOUNT FITNESS CORP., 6450 E. BANDINI
BLVD., LOS ANGELES, CALIFORNIA 90040-3185, FOR A LIST OF AUTHORIZED DEALERS OR BEFORE RETURNING ANY DEFECTIVE
EQUIPMENT. PARAMOUNT FITNESS CORP. ©FEBRUARY 1, 2013.
TRUE Fitness
865 Hoff Road
O'Fallon, MO 63366
Phone: 1-800-883-8783 or
1-800-721-2121
www.truefitness.com