LED Driver - Smart mit LED
LED Driver
Für jede Leuchte den richtige Driver
Qualität steht an erster Stelle
LED Driver
smart mit led gmbh
CertaDrive
CertaDrive 15W 0.35A 42V I 230V
May 12, 2014
Affordable and reliable LED Drivers
Affordable LED Driver range offering Philips reliability. The CertaDrive range is compatible
with COB and mid-power LEDs from any LED manufacturer.
Benefits
Dimensions and weight
Specification item
Value
Unit
Length (A1)
115
mm
Width (B1)
45
mm
Height (C1)
29
mm
Fixing hole diameter (D1)
3.4
mm
Fixing hole distance (A2)
105
mm
Weight
70
gram
Condition
• Driver design based on Philips;’ experience and knowledge of conventional fluorescent and
HID technologies. Various power wattage Drivers that are related to the lumen
packages/applications – Fixed output Drivers. Independent-version housing design for
stand-alone installations
Features
• High reliability
• Luminaire design flexibility to keep stable/constant
• lumen output and light quality levels
• Fast Time to Market
• One supplier for professional general lighting LED Drivers
• Affordable LED Drivers
Applications
• Public buildings (airports, cinemas, theaters, exhibition halls…)
• Retail (supermarkets, shops…)
• Office
Operational temperatures and humidity
Specification item
Value
Unit
Ambient temperature
+0...+50
ºC
Tcase-max
75
ºC
Maximum temperature measured at Tc-point
Tcase-life
65
ºC
Measured at Tc-point
Maximum housing temperature
130
ºC
In case of a failure
Relative humidity
10...90
%
Non-condensing
May 12, 2014
CertaDrive 15W 0.35A 42V I 230V
6
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
Condition
© 2014 Koninklijke Philips Electronics N.V. All rights reserved.
Page 3 of 6
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
7
LED Driver
smart mit led gmbh
CertaDrive
CertaDrive 20W 0.5A 40V I 230V
May 12, 2014
Affordable and reliable LED Drivers
Affordable LED Driver range offering Philips reliability. The CertaDrive range is compatible
with COB and mid-power LEDs from any LED manufacturer.
Benefits
Dimensions and weight
Specification item
Value
Unit
Length (A1)
115
mm
Width (B1)
45
mm
Height (C1)
29
mm
Fixing hole diameter (D1)
3.4
mm
Fixing hole distance (A2)
105
mm
Weight
70
gram
Condition
• Driver design based on Philips;’ experience and knowledge of conventional fluorescent and
HID technologies. Various power wattage Drivers that are related to the lumen
packages/applications – Fixed output Drivers. Independent-version housing design for
stand-alone installations
Features
• High reliability
• Luminaire design flexibility to keep stable/constant
• lumen output and light quality levels
• Fast Time to Market
• One supplier for professional general lighting LED Drivers
• Affordable LED Drivers
Applications
• Public buildings (airports, cinemas, theaters, exhibition halls…)
• Retail (supermarkets, shops…)
• Office
Operational temperatures and humidity
Specification item
Value
Unit
Ambient temperature
+0...+50
ºC
Tcase-max
75
ºC
Maximum temperature measured at Tc-point
Tcase-life
65
ºC
Measured at Tc-point
Maximum housing temperature
130
ºC
In case of a failure
Relative humidity
10...90
%
Non-condensing
May 12, 2014
CertaDrive 20W 0.5A 40V I 230V
8
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
Condition
© 2014 Koninklijke Philips Electronics N.V. All rights reserved.
Page 3 of 6
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
9
LED Driver
smart mit led gmbh
CertaDrive
CertaDrive 30W 0.7A 42V I 230V
July 31, 2014
Affordable and reliable LED Drivers
Affordable LED Driver range offering Philips reliability. The CertaDrive range is compatible
with COB and mid-power LEDs from any LED manufacturer.
Benefits
Dimensions and weight
Specification item
Value
Unit
Length (A1)
105
mm
Width (B1)
68
mm
Height (C1)
32
mm
Fixing hole diameter (D1)
3.6
mm
Fixing hole distance (A2)
87
mm
Weight
129
gram
Condition
• Driver design based on Philips’ experience and knowledge of conventional fluorescent and
HID technologies
• Various power wattage Drivers that are related to the lumen packages/applications
• Fixed output Drivers
• Independent-version housing design for stand-alone installations
Features
• High reliability
• Luminaire design flexibility to keep stable/constant
• Lumen output and light quality levels
• Fast Time to Market
• One supplier for professional general lighting LED Drivers
• Affordable LED Drivers
Operational temperatures and humidity
Specification item
Value
Unit
Ambient temperature
+0...+50
ºC
Applications
Tcase-max
75
ºC
Maximum temperature measured at Tc-point
• Public buildings (airports, cinemas, theaters, exhibition halls)
Tcase-life
65
ºC
Measured at Tc-point
Maximum housing temperature
130
ºC
In case of a failure
Relative humidity
10...90
%
Non-condensing
Condition
• Retail (supermarkets, shops)
• Office
Condition
Storage temperature and humidity
Specification item
Value
Unit
Ambient temperature
-25...+85
ºC
Relative humidity
5...95
%
Non-condensing
Specification item
Value
Unit
Condition
Driver lifetime
30,000
hours
Lifetime
Measured temperature at Tc-point is Tcase-life.
Maximum failures = 10%
Programmable features
Specification item
Value
Remark
Set output current (AOC)
No
See Design-in guide.
Condition
Default output current: 0.7 A
LED module temperature derating (MTP) No
Constant Lumen Over Lifetime (CLO)
No
DC emergency dimming (DCemDIM)
No
Corridor mode
No
Energy metering
No
Diagnostics
No
July 31, 2014
CertaDrive 30W 0.7A 42V I 230V
10
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
Current output decreased to 15%
© 2014 Koninklijke Philips Electronics N.V. All rights reserved.
Page 3 of 6
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
11
LED Driver
smart mit led gmbh
CertaDrive
CertaDrive 40W 1.05A 38V I 230V
July 31, 2014
Affordable and reliable LED Drivers
Affordable LED Driver range offering Philips reliability. The CertaDrive range is compatible
with COB and mid-power LEDs from any LED manufacturer.
Benefits
Dimensions and weight
Specification item
Value
Unit
Length (A1)
105
mm
Width (B1)
68
mm
Height (C1)
32
mm
Fixing hole diameter (D1)
3.6
mm
Fixing hole distance (A2)
87
mm
Weight
129
gram
Condition
• Driver design based on Philips’ experience and knowledge of conventional fluorescent and
HID technologies
• Various power wattage Drivers that are related to the lumen packages/applications
• Fixed output Drivers
• Independent-version housing design for stand-alone installations
Features
• High reliability
• Luminaire design flexibility to keep stable/constant
• Lumen output and light quality levels
• Fast Time to Market
• One supplier for professional general lighting LED Drivers
• Affordable LED Drivers
Operational temperatures and humidity
Specification item
Value
Unit
Ambient temperature
+0...+45
ºC
Applications
Tcase-max
75
ºC
Maximum temperature measured at Tc-point
• Public buildings (airports, cinemas, theaters, exhibition halls)
Tcase-life
65
ºC
Measured at Tc-point
Maximum housing temperature
130
ºC
In case of a failure
Relative humidity
10...90
%
Non-condensing
Condition
• Retail (supermarkets, shops)
• Office
Condition
Storage temperature and humidity
Specification item
Value
Unit
Ambient temperature
-25...+85
ºC
Relative humidity
5...95
%
Non-condensing
Specification item
Value
Unit
Condition
Driver lifetime
30,000
hours
Lifetime
Measured temperature at Tc-point is Tcase-life.
Maximum failures = 10%
Programmable features
Specification item
Value
Remark
Set output current (AOC)
No
See Design-in guide.
Condition
Default output current: 1.05 A
LED module temperature derating (MTP) No
Constant Lumen Over Lifetime (CLO)
No
DC emergency dimming (DCemDIM)
No
Corridor mode
No
Energy metering
No
Diagnostics
No
July 31, 2014
CertaDrive 40W 1.05A 38V I 230V
12
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
Current output decreased to 15%
© 2014 Koninklijke Philips Electronics N.V. All rights reserved.
Page 3 of 6
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
13
LED Driver
smart mit led gmbh
25W Multiple-Stage Output Current LED Power Supply
25W Multiple-Stage Output Current LED Power Supply
LCM-25DA
LCM-25DA
series
series
Mechanical Specification
Case No.LCM-25
Unit:mm
105
93
6
※ T case: Max. Case Temperature.
1
2
12 12
20
1
2
3
4
5
6
62
68
2 -ψ
4.2
6
TB1
35
T case
TB2
CN100,CN101
ON
1 2 3 4 5 6
Bottom View
45.5
40.8
7.8
110
M
■ Features
�‡
­ ­ ƒ„ ˆ
�‰Š‹ �Œ
„Ž …
�„
‘ ˆ
 ‡ � ­ … �Ž € � Ⅱ Ž’
�Œ
ƒ … € € …
�ƒ„ €
�
€ ­
M
SELV
18
■ Applications
�ƒ€ �‡…… � €
Pin No.
1
2
4
Assignment
+Vo
-Vo
SYN. Connector(CN100/CN101):JST B2B-PH-KL or equivalent
23
F
Terminal Pin No. Assignment(TB2)
7.8
2-M3
Pin No.
1
2
Assignment
+
Mating Housing
Terminal
JST PHR-2
or equivalent
JST SPH-002T-P0.5S
or equivalent
Terminal Pin No. Assignment(TB1)
Pin No.
1
2
3
Assignment
AC/L
AC/N
PUSH
Pin No.
4
5
Assignment
DA+
DA-
2
2
Note:Please use wires with a cross section of 0.5~2.5mm (14~20AWG) for TB1 and wires with a cross section of 0.5~1.5 mm (16~20AWG) for TB2.
Please use wires with a cross section of 0.126~0.205mm 2 (24~26AWG) for CN100/CN101
Installation Manual
“
ƒ‰”
Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html
�• € –“•
”
�„ †
…
 � ■ Description

 ­ ­ € ­ €‚
­
ƒ„  € € …
€ ­ € ƒ  †
€ € …  … ­ € 
■ Model Encoding
LCM - 25 DA
ƒ ‡
ˆ File Name:LCM-25DA-SPEC 2014-05-29
14
File Name:LCM-25DA-SPEC 2014-05-29
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
15
LED Driver
smart mit led gmbh
LCM-40DA
40W Multiple-Stage Output Current LED Power Supply
series
SPECIFICATION
RATED POWER
42W
±5%
4.2
15
T case
2-
5
1
2
3
4
SYN.
1
CN101
2
3
CN100
4
TB3
1
2
TB5
ON
1 2 3 4 5 6
Bottom View
Terminal Pin No. Assignment(TB3)
65.5
7.8
500mA
600mA
700mA
900mA
1050mA
2 ~ 80V
2 ~ 67V
2 ~ 57V
2 ~ 45V
2 ~ 40V
Pin No.
1
2
7.8
2-M3
VOLTAGE RANGE
Note.4 180 ~ 295VAC
65V
254 ~ 417VDC
47 ~ 63Hz
Note.6 91%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
<0.5mA / 240VAC
SHORT CIRCUIT
Constant current limiting, recovers automatically after fault condition is removed
110 ~ 130V
Protection type : Shutdown o/p voltage, re-power on to recover
OVER TEMPERATURE
DIMMING
Please see "Dimming Operation"
Please see "Synchronization Operation"
WORKING TEMP.
-30 ~ +60℃ (Refer to "Derating Curve")
EMI FILTER
&
RECTIFIERS
I/P
20 ~ 90% RH non-condensing
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL8750, ENEC EN61347-1, EN61347-2-13, EN62384 independent, GB19510.14,GB19510.1 approved
DALI STANDARDS
Comply with IEC62386-101, 102, 207
O.L.P.
JST SXH-001T-P0.6
or equivalent
RECTIFIERS
+12Vaux
(optional)
RECTIFIERS
&
FILTER
+V
-V
DIM+
DIM-
CURRENT
LIMIT
MCU
DETECTION
CIRCUIT
PWM
CONTROL
O.T.P.
Static Characteristics
100
100
I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015, EN61000-3-2 Class C(≧40% rated power) ; EN61000-3-3; GB17625.1,GB17743
80
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2KV), criteria A
193.6K hrs min. MIL-HDBK-217F (25℃)
60
123.5*81.5*23mm (L*W*H)
0.24Kg ; 54pcs/15Kg/1.12CUFT
℃

 ­€‚ ƒ€„…ƒ €
†„­

‡­ƒ ˆ ‰­ ­Š‹‹ 
ŒŽ
Š‘
„…ƒ ’
“”•‰‚†„–“”•‰‚†„‚—˜–
‘~’’ ­ ­™
š
‘ 
 ›
œŽ ›
‚›
Ž„‡ ­
LOAD (%)
I/P-O/P:3.75KVAC
EMC
PACKING
POWER
SWITCHING
PFC
CIRCUIT
PFC
CONTROL
SAFETY & WITHSTAND VOLTAGE
DIMENSION
Terminal
JST XHP
or equivalent
PFC fosc : 60KHz
PWM fosc : 80KHz
Derating Curve
-40 ~ +80℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 50℃)
SAFETY STANDARDS
MTBF
Mating Housing
O.V.P.
VIBRATION
EMC EMISSION
EMC IMMUNITY
Assignment
+
-
Shut down o/p voltage, re-power on to recover
SYNCHRONIZATION
ISOLATION RESISTANCE
Pin No.
1,3
2,4
Assignment
DA+
DA-
Block Diagram
AUXILIARY POWER (optional) 12V @ 50mA for driving fan; Tolerance ±5%
By external NTC(not provide with the power supply), please see "Temperature compensation operation"
TEMP. COMPENSATION
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
Pin No.
4
5
0.23A/230VAC
0.2A/277VAC
COLD START 20A(twidth=260μs measured at 50% Ipeak) at 230VAC
LEAKAGE CURRENT
PROTECTION OVER VOLTAGE
Assignment
AC/L
AC/N
PUSH
Pin No.
1
2
3
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
SYN. Connector(CN101/CN100):JST B2B-XH or equivalent
Terminal Pin No. Assignment(TB1)
PF≧0.975/230VAC, PF≧0.96/277VAC at rated power (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION Total harmonic distortion will be lower than 20% when output loading is 75% or higher
Assignment
+NTC
-NTC
Pin No.
3
4
Assignment
+Vo
-Vo
Pin No.
1
2
16ms/230VAC at rated power
FREQUENCY RANGE
Assignment
+FAN(optional)
-FAN(optional)
Terminal Pin No. Assignment(TB5)
±5%
Note.5 500ms, 80ms / 230VAC at rated power
HOLD UP TIME (Typ.)
40
TB1
4
Others
90
80
70
40
LOAD (%)
SETUP, RISE TIME
NOTE
3
NO LOAD OUTPUT VOLTAGE (max.) 110V
OTHERS
2
RIPPLE & NOISE (max.) Note.2 700mVp-p
CURRENT ACCURACY
FUNCTION
6.75
1
6.75
4
2 ~ 100V
Unit:mm
※ T case: Max. Case Temperature.
23
DC VOLTAGE RANGE
RIPPLE CURRENT
INPUT
110
LCM-40DA
SELECTABLE CURRENT Note.3 350mA
Case No.LCM-60A
123.5
6.75
39.3
MODEL
OUTPUT
Mechanical Specification
6.75
■‹
¢
�
‡„…ƒœ”
�‘žŸ
�¡
‚‡ƒ‹
�ƒ¢œ Š‡‡­Š‡
�­‡
�‹
�Ⅱ
‹£
�¡
‚„‰…
­
�Š
™
•¢‰‚†„‚—˜–
�…ƒ­
�‰­ ­
‡•…ŽŒ‘Œ‚’–
�
™
�
“”•“”‰‚†„‚—˜–•’–
�ƒ

�œ
‰Ž„­ ­
�
68
LCM-40DA
81.5
40W Multiple-Stage Output Current LED Power Supply
series
1050mA
20
-30
-15
0
15
30
40
50
AMBIENT TEMPERATURE (℃)
60
70
(HORIZONTAL)
60
50
40
180
190
200
210
220
230 240
250
260
270
280
295
INPUT VOLTAGE (V) 60Hz
File Name:LCM-40DA-SPEC 2014-10-27
16
File Name:LCM-40DA-SPEC 2014-10-27
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
17
LED Driver
smart mit led gmbh
LCM-60DA
60W Multiple-Stage Output Current LED Power Supply
Mechanical Specification
series
■‹
¢
SPECIFICATION
MODEL
110
6.75
1
700mA
900mA
1050mA
1400mA
2 ~ 86V
2 ~ 67V
2 ~ 57V
2 ~ 42V
RATED POWER
60.3W
RIPPLE CURRENT
±5%
4.2
T case
2-
5
68
SYN.
1
CN101
2
3
CN100
4
1
2
TB5
1 2 3 4 5 6
Bottom View
Terminal Pin No. Assignment(TB3)
65.5
Pin No.
1
2
7.8
2-M3
Assignment
+FAN(optional)
-FAN(optional)
Assignment
+NTC
-NTC
Pin No.
3
4
4
600mA
40
TB1
4
ON
7.8
2 ~ 90V
3
TB3
LCM-60DA
2 ~ 90V
2
1
2
3
4
39.3
DC VOLTAGE RANGE
※ T case: Max. Case Temperature.
6.75
SELECTABLE CURRENT Note.3 500mA
Unit:mm
123.5
6.75
81.5
�
‡„…ƒž”
�™Ÿ‘
�¡
‚‡ƒ‹
�ƒ¢ž Š‡‡­Š‡
�­‡
�‹
�Ⅱ
‹£
�¡
‚„‰…
­
�Š
š
•¢‰‚Œ„‚—˜–
�…ƒ­
�‰­ ­
‡•…ŽŒ™Œ‚’–
�
š
�
“”•“”‰‚Œ„‚—˜–•’–
�ƒ

�ž
‰Ž„­ ­
�
Case No.LCM-60A
15
LCM-60DA
6.75
60W Multiple-Stage Output Current LED Power Supply
series
23
RIPPLE & NOISE (max.) Note.2 700mVp-p
NO LOAD OUTPUT VOLTAGE (max.) 95V
±5.0%
73V
SETUP, RISE TIME
Note.5 500ms, 80ms / 230VAC at rated power
VOLTAGE RANGE
POWER FACTOR (Typ.)
PF≧0.975/230VAC, PF≧0.96/277VAC at rated power (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION Total harmonic distortion will be lower than 20% when output loading is 75% or higher
EFFICIENCY (Typ.)
<0.5mA / 240VAC
SHORT CIRCUIT
Constant current limiting, recovers automatically after fault condition is removed
105 ~ 125V
Protection type : Shutdown o/p voltage, re-power on to recover
OVER TEMPERATURE
DIMMING
Please see "Dimming Operation"
SYNCHRONIZATION
Please see "Synchronization Operation"
WORKING TEMP.
-30 ~ +60℃ (Refer to "Derating Curve")
Comply with IEC62386-101, 102, 207
EMC
I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015, EN61000-3-2 Class C(≧40% rated power) ; EN61000-3-3; GB17625.1,GB17743
PACKING
NOTE
PFC fosc : 60KHz
PWM fosc : 80KHz
POWER
SWITCHING
PFC
CIRCUIT
O.L.P.
PFC
CONTROL
RECTIFIERS
+12Vaux
(optional)
RECTIFIERS
&
FILTER
+V
-V
DIM+
DIM-
CURRENT
LIMIT
O.T.P.
MCU
DETECTION
CIRCUIT
PWM
CONTROL
Derating Curve
-40 ~ +80℃, 10 ~ 95% RH
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
DIMENSION
JST SXH-001T-P0.6
or equivalent
Static Characteristics
±0.03%/℃ (0 ~ 50℃)
UL8750, ENEC EN61347-1, EN61347-2-13, EN62384 independent, GB19510.14,GB19510.1 approved
MTBF
Terminal
JST XHP
or equivalent
O.V.P.
SAFETY STANDARDS
EMC EMISSION
EMC IMMUNITY
Mating Housing
20 ~ 90% RH non-condensing
VIBRATION
ISOLATION RESISTANCE
Assignment
+
-
Shut down o/p voltage, re-power on to recover
DALI STANDARDS
SAFETY & WITHSTAND VOLTAGE
OTHERS
EMI FILTER
&
RECTIFIERS
I/P
AUXILIARY POWER (optional) 12V @ 50mA for driving fan; Tolerance±5%
By external NTC(not provide with the power supply), please see "Temperature compensation operation"
TEMP. COMPENSATION
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
Pin No.
1,3
2,4
Assignment
DA+
DA-
0.32A/230VAC
0.27A/277VAC
COLD START 20A(twidth=270μs measured at 50% Ipeak) at 230VAC
LEAKAGE CURRENT
PROTECTION OVER VOLTAGE
Pin No.
4
5
Block Diagram
Note.6 92%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
FUNCTION
254 ~ 417VDC
47 ~ 63Hz
100
100
Others
I/P-O/P:3.75KVAC
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2KV), criteria A
193.6K hrs min. MIL-HDBK-217F (25℃)
123.5*81.5*23mm (L*W*H)
0.24Kg ; 54pcs/15Kg/1.12CUFT
℃

 ­€‚ ƒ€„…ƒ €
†„­

‡­ƒ ˆ ‰­ ­Š‹‹ 
ŒŽ
‘ŠŒ’
„…ƒ ’
“”•‰‚Œ„–“”•‰‚Œ„‚—˜–
™~’’ ­ ­š
›
™ 
 œ
žŽ œ
‚œ
Ž„‡ ­
90
80
80
70
60
LOAD (%)
INPUT
Note.4 180 ~ 295VAC
FREQUENCY RANGE
Assignment
AC/L
AC/N
PUSH
Pin No.
1
2
3
16ms/230VAC at rated power
HOLD UP TIME (Typ.)
SYN. Connector(CN101/CN100):JST B2B-XH or equivalent
Terminal Pin No. Assignment(TB1)
CURRENT ACCURACY
Assignment
+Vo
-Vo
Pin No.
1
2
40
LOAD (%)
OUTPUT
Terminal Pin No. Assignment(TB5)
1050mA / 1400mA
20
-30
-15
0
15
30
40
50
AMBIENT TEMPERATURE (℃)
60
70
(HORIZONTAL)
60
50
40
180
190
200
210
220
230 240
250
260
270
280
295
INPUT VOLTAGE (V) 60Hz
File Name:LCM-60DA-SPEC 2014-10-27
18
File Name:LCM-60DA-SPEC 2014-10-27
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
19
LED Driver
smart mit led gmbh
LED Driver
Compact dimming
Udriver LCAI 20W 350mA–900mA ECO SR
ECOseries
Udriver LCAI 35W 350mA–900mA ECO SR
ECOseries
Product description
•IndependentdimmableLEDDriver
•IndependentdimmableLEDDriver
•ConstantcurrentLEDDriver
•ConstantcurrentLEDDriver
•Outputcurrentadjustablebetween350–900mA
•Outputcurrentadjustablebetween350–900mA
•Max.outputpower20W
•Max.outputpower35W
•Nominallife-timeupto100,000h
•Nominallife-timeupto100,000h
•5-yearguarantee
•5-yearguarantee
•Dimmingrange1...100%
•Dimmingrange1...100%
Properties
Properties
•Casing:polycarbonate,white
•Casing:polycarbonate,white
•Rapidinstallationofcableclampandterminalcover,notoolrequired
•Rapidinstallationofcableclampandterminalcover,notoolrequired
31
Product description
•switchDIM(withmemoryfunction)
•corridorFUNCTION
•DALIDEVICEType6
•DSI
5
119.8
•Inputfortemperaturesensor(LEDtemperaturemonitoring)
LCAI 20W 350mA-900mA ECO SR
Packaging
Article number
carton
Packaging
pallet
Weightperpc.
28000123
400pc(s).
0.2kg
10pc(s).
5
148.5
•switchDIM(withmemoryfunction)
Ordering data
Type
tc
Interfaces
33
Ø4.2
•DSI
53.7
70
tc
•DALIDEVICEType6
•Adjustableoutputcurrent(I-selectresisitororDALI)
Ø4.2
oftheLEDDriver
Interfaces
Functions
220
•AccessoryLCF12VFANDRIVERfitsintothesecondarywiringarea
Ø8
5
•TypeofprotectionIP20
Ø7
200
9
•Largeconnectioncompartment
•TypeofprotectionIP20
85
•Largeconnectioncompartment
31
LED Driver
Compact dimming
•corridorFUNCTION
Ordering data
•Inputfortemperaturesensor(LEDtemperaturemonitoring)
Type
Article number
Packaging
carton
Packaging
pallet
Weightperpc.
LCAI 35W 350mA-900mA ECO SR
28000125
10pc(s).
400pc(s).
0.263kg
•Power-upfadingatAC
Functions
•IntelligentTemperatureGuard(overtemperatureprotection)
•Adjustableoutputcurrent(I-selectresisitororDALI)
•Short-circuitproof
•Power-upfadingatAC
•Overloadprotection
•IntelligentTemperatureGuard(overtemperatureprotection)
•ConstantLightOutputfunction
•Short-circuitproof
•Suitableforemergencylightingunitsacc.toEN50172
•Overloadprotection
•ConstantLightOutputfunction
•Suitableforemergencylightingunitsacc.toEN50172
È
Standards,page4
È
Standards,page4
Data sheet 02/15-LC059-7
Subject to change without notice.
20
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
www.tridonic.com
1
Data sheet 02/15-LC063-9
Subject to change without notice.
www.tridonic.com
1
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
21
LED Driver
smart mit led gmbh
LED Driver
Compact dimming
Udriver LCAI 35W 900mA–1750mA ECO SR
ECOseries
Udriver LCAI 55W 900mA–1750mA ECO SR
ECOseries
Product description
•IndependentdimmableLEDDriver
•IndependentdimmableLEDDriver
•ConstantcurrentLEDDriver
•ConstantcurrentLEDDriver
•Outputcurrentadjustablebetween900–1,750mA
•Outputcurrentadjustablebetween900–1,750mA
•Max.outputpower35W
•Max.outputpower55W
•Nominallife-timeupto100,000h
•Nominallife-timeupto100,000h
•5-yearguarantee
•5-yearguarantee
•Dimmingrange1...100%
•Dimmingrange1...100%
Properties
Properties
•Casing:polycarbonate,white
•Casing:polycarbonate,white
•Rapidinstallationofcableclampandterminalcover,notoolrequired
•Rapidinstallationofcableclampandterminalcover,notoolrequired
31
Product description
•DALIDEVICEType6
Ordering data
•Inputfortemperaturesensor(LEDtemperaturemonitoring)
Type
Article number
Packaging
carton
Packaging
pallet
Weightperpc.
LCAI 35W 900mA-1750mA ECO SR
28000127
10pc(s).
400pc(s).
0.272kg
Type
Article number
Packaging
carton
Packaging
pallet
Weightperpc.
LCAI 55W 900mA-1750mA ECO SR
28000129
10pc(s).
400pc(s).
0.278kg
Functions
•Adjustableoutputcurrent(I-selectresisitororDALI)
•Power-upfadingatAC
•Power-upfadingatAC
•IntelligentTemperatureGuard(overtemperatureprotection)
•IntelligentTemperatureGuard(overtemperatureprotection)
•Short-circuitproof
•Short-circuitproof
•Overloadprotection
•Overloadprotection
•ConstantLightOutputfunction
•ConstantLightOutputfunction
•Suitableforemergencylightingunitsacc.toEN50172
•Suitableforemergencylightingunitsacc.toEN50172
È
È
Standards,page4
Standards,page4
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
9
Ordering data
•Inputfortemperaturesensor(LEDtemperaturemonitoring)
•Adjustableoutputcurrent(I-selectresisitororDALI)
www.tridonic.com
Ø8
•corridorFUNCTION
Functions
Subject to change without notice.
1
5
157
•switchDIM(withmemoryfunction)
•corridorFUNCTION
Data sheet 02/15-LC065-9
tc
•DSI
5
148.9
•switchDIM(withmemoryfunction)
85
Interfaces
30
•DSI
Ø4.2
oftheLEDDriver
85
tc
Interfaces
220
•AccessoryLCF12VFANDRIVERfitsintothesecondarywiringarea
Ø4.2
oftheLEDDriver
22
•TypeofprotectionIP20
Ø8
220
•AccessoryLCF12VFANDRIVERfitsintothesecondarywiringarea
•DALIDEVICEType6
•Largeconnectioncompartment
16
•TypeofprotectionIP20
9
•Largeconnectioncompartment
31
LED Driver
Compact dimming
Data sheet 02/15-LC067-9
Subject to change without notice.
www.tridonic.com
1
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
23
LED Driver
smart mit led gmbh
Produktdatenblatt
Technische Daten
Elektrische Daten
Nennausgangsleistung
27 W 1)
Eingangsspannung AC
198…264 V 2)
Netzfrequenz
50…60 Hz
OTi DALI 25/220…240/700 LT2
Nennausgangsspannung
12…54 V 3)
OPTOTRONIC Intelligent | – Dimmbar DALI
Nennausgangsstrom
180…700 mA 4)
Verlustleistung im Stand-By-Betrieb
<0.5 W
Nennspannung
220…240 V
Anwendungsgebiete
Nennstrom
0,14 A
_
Netzleistungsfaktor λ
0,95
EVG-Effizienz
86 % 5)
Einschaltstrom
17 A 6)
Max. Anz. EVG an Sicherungsaut. 10 A (B)
45
Max. Anz. EVG an Sicherungsaut. 16 A (B)
80
Galvanische Trennung primär/sekundär
3.75 kV 7)
Stoßspannungsfestigkeit (L – N)
1 kV
Produktdatenblatt
Einbau in Notbeleuchtungsanlagen gemäß IEC 61347-23, Anhang J
_ Für den Einsatz in Leuchten mit flexibler
Stromeinstellung (DALI, CLO, LEDset) geeignet
_ Geeignet für SELV-äquivalente Installationen im
Innenbereich
_
Geeignet für Leuchten der Schutzklasse I und II
_ Einbau oder unabhängige Montage über Cable Clamp Kit
möglich
1) Teillast 7…27 W
__
__
2) Zulässiger Spannungsbereich
3) Maximum 60 V
4) ±5%
5) Typisch / Bei Volllast und 230 V
6) t
= 50 µs (gemessen bei 50 % I
)
width
peak
7) SELV-äquivalent
Produktvorteile
_ Vielseitiger DALI-Weitbereichstreiber durch flexible Ausgangscharakteristik
_ Sehr hohe Effizienz und Zuverlässigkeit
_ Schutz des Systems dank Thermomanagement und Smart Control
Abmessungen & Gewicht
Länge
103,0 mm
Vielseitiger Anwendungsbereich durch OSRAM DALI Technologie:
Breite
67,0 mm
_ Einfacher Einsatz in Korridoren und Toiletten durch die dreistufige Corridor-Funktion
_ Touch DIM-Anwendung: Einfache Steuerung durch Taster oder Sensor
_ Energieeffizienter Touch DIM-Betrieb durch automatische Abschaltung bei ausreichendem Restlicht
_ Geeignet für Notlichtinstallationen (gem. EN 60598-2-22 und IEC 61347-2-13, Anhang J) dank DC-Erkennung (0 Hz,
Lochmaßabstand Länge
94.0 mm
Lochmaßabstand Breite
58.0 mm
Höhe
29,5 mm
pulsierender DC), ein-/ausschaltbar
_ Rückmeldung des Leistungsverbrauchs und Betriebsstunden (Fit for SMART GRID)
_ Geeignet für Gebäude gemäß EPBD/BREEAM/LEED durch automatische Constant Lumen Output-Einstellung
Produktgewicht
149,00 g
Leitungsquerschnitt eingangsseitig
0.2…1.5 mm² 1)
Leitungsquerschnitt ausgangsseitig
0.2…1.5 mm² 1)
Abisolierlänge eingangsseitig
8.0…9.0 mm
Produkteigenschaften
_ Versorgungsspannung: 220…240 V
_ Netzfrequenz: 0 Hz | 50 Hz | 60 Hz
_ Netzspannung: 198…264 V
_ Sicherheit nach EN 61347-1, 61347-2-3, 61347-2-13, 62384
_ Funkentstörung nach EN 55015:2007+A1:2007/CDN
_ Netzstromoberwellen nach EN 61000-3-2
24
25. Juni 2015, 18:47:33
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
OTi DALI 25/220…240/700 LT2
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
1) Massive oder flexible Adern
Farben & Materialien
Gehäusematerial
© 2015, OSRAM GmbH. Alle Rechte vorbehalten.
Seite 1 von 5
Kunststoff
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
25. Juni 2015, 18:47:33
OTi DALI 25/220…240/700 LT2
© 2015, OSRAM GmbH. Alle Rechte vorbehalten.
Seite 3 von 5
25
LED Driver
smart mit led gmbh
Produktdatenblatt
Technische Daten
Elektrische Daten
Nennausgangsleistung
35 W 1)
Eingangsspannung AC
198…264 V 2)
Netzfrequenz
50…60 Hz
OTi DALI 35/220…240/1A0 LT2
Nennausgangsspannung
15…54 V 3)
OPTOTRONIC Intelligent | – Dimmbar DALI
Nennausgangsstrom
350…1050 mA 4)
Verlustleistung im Stand-By-Betrieb
<0.5 W
Nennspannung
220…240 V
Nennstrom
0,18 A
Netzleistungsfaktor λ
0,95
EVG-Effizienz
86 % 5)
Einschaltstrom
17 A 6)
Max. Anz. EVG an Sicherungsaut. 10 A (B)
33
Max. Anz. EVG an Sicherungsaut. 16 A (B)
55
Galvanische Trennung primär/sekundär
3.75 kV 7)
Stoßspannungsfestigkeit (L – N)
1 kV
Produktdatenblatt
Anwendungsgebiete
_
Einbau in Notbeleuchtungsanlagen gemäß IEC 61347-23, Anhang J
_ Für den Einsatz in Leuchten mit flexibler
Stromeinstellung (DALI, CLO, LEDset) geeignet
_ Geeignet für SELV-äquivalente Installationen im
Innenbereich
_
Geeignet für Leuchten der Schutzklasse I und II
_ Einbau oder unabhängige Montage über Cable Clamp Kit
möglich
1) Teillast 15…35 W
__
__
2) Zulässiger Spannungsbereich
3) Maximum 60 V
4) ±5%
5) Typisch / Bei Volllast und 230 V
6) t
= 50 µs (gemessen bei 50 % I
)
width
peak
7) SELV-äquivalent
Produktvorteile
_ Vielseitiger DALI-Weitbereichstreiber durch flexible Ausgangscharakteristik
_ Sehr hohe Effizienz und Zuverlässigkeit
_ Schutz des Systems dank Thermomanagement und Smart Control
Abmessungen & Gewicht
Vielseitiger Anwendungsbereich durch OSRAM DALI Technologie:
_ Einfacher Einsatz in Korridoren und Toiletten durch die dreistufige Corridor-Funktion
_ Touch DIM-Anwendung: Einfache Steuerung durch Taster oder Sensor
_ Energieeffizienter Touch DIM-Betrieb durch automatische Abschaltung bei ausreichendem Restlicht
_ Geeignet für Notlichtinstallationen (gem. EN 60598-2-22 und IEC 61347-2-13, Anhang J) dank DC-Erkennung (0 Hz,
pulsierender DC), ein-/ausschaltbar
_ Rückmeldung des Leistungsverbrauchs und Betriebsstunden (Fit for SMART GRID)
_ Geeignet für Gebäude gemäß EPBD/BREEAM/LEED durch automatische Constant Lumen Output-Einstellung
Produkteigenschaften
_ Versorgungsspannung: 220…240 V
_ Netzfrequenz: 0 Hz | 50 Hz | 60 Hz
_ Netzspannung: 198…264 V
_ Sicherheit nach EN 61347-1, 61347-2-3, 61347-2-13, 62384
_ Funkentstörung nach EN 55015:2007+A1:2007/CDN
_ Netzstromoberwellen nach EN 61000-3-2
26
17. Juni 2015, 22:19:50
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
OTi DALI 35/220…240/1A0 LT2
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
Länge
103,0 mm
Breite
67,0 mm
Lochmaßabstand Länge
94.0 mm
© 2015, OSRAM GmbH. Alle Rechte vorbehalten.
Seite 1 von 5
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
17. Juni 2015, 22:19:50
OTi DALI 35/220…240/1A0 LT2
© 2015, OSRAM GmbH. Alle Rechte vorbehalten.
Seite 3 von 5
27
LED Driver
smart mit led gmbh
Produktdatenblatt
Technische Daten
Elektrische Daten
Produktdatenblatt
Nennausgangsleistung
55 W 1)
Eingangsspannung AC
198…264 V 2)
Netzfrequenz
50…60 Hz
OTi DALI 50/220…240/1A4 LT2 FAN
Nennausgangsspannung
15…54 V 3)
OPTOTRONIC Intelligent | – Dimmbar DALI
Nennausgangsstrom
600…1400 mA 4)
Verlustleistung im Stand-By-Betrieb
<0.5 W
Nennspannung
220…240 V
Anwendungsgebiete
Nennstrom
0,27 A
_
Netzleistungsfaktor λ
0,95
EVG-Effizienz
91 % 5)
Einschaltstrom
30 A 6)
Max. Anz. EVG an Sicherungsaut. 10 A (B)
12
Max. Anz. EVG an Sicherungsaut. 16 A (B)
20
Galvanische Trennung primär/sekundär
3.75 kV 7)
Stoßspannungsfestigkeit (L/N – Erde)
2 kV 8)
Stoßspannungsfestigkeit (L – N)
1 kV
Einbau in Notbeleuchtungsanlagen gemäß IEC 61347-23, Anhang J
_ Für den Einsatz in Leuchten mit flexibler
Stromeinstellung (DALI, CLO, LEDset) geeignet
_ Geeignet für SELV-äquivalente Installationen im
Innenbereich
_ Geeignet für Leuchten der Schutzklasse I und II
_ Einbau oder unabhängige Montage über Cable Clamp Kit
möglich
__
__
1) Teillast 22…55 W
2) Zulässiger Spannungsbereich
3) Maximum 60 V
4) ±5%
5) Bei Volllast und 230 V
Produktvorteile
6) t
= 200 µs (gemessen bei 50 % I
)
width
peak
7) SELV-äquivalent
_ Vielseitiger DALI-Weitbereichstreiber durch flexible Ausgangscharakteristik
_ Sehr hohe Effizienz und Zuverlässigkeit
_
Schutz des Systems dank Thermomanagement und Smart Control
8) Funktionserde
Abmessungen & Gewicht
Vielseitiger Anwendungsbereich durch OSRAM DALI Technologie:
_ Einfacher Einsatz in Korridoren und Toiletten durch die dreistufige Corridor-Funktion
_ Touch DIM-Anwendung: Einfache Steuerung durch Taster oder Sensor
_ Energieeffizienter Touch DIM-Betrieb durch automatische Abschaltung bei ausreichendem Restlicht
_ Geeignet für Notlichtinstallationen (gem. EN 60598-2-22 und IEC 61347-2-13, Anhang J) dank DC-Erkennung (0 Hz,
pulsierender DC), ein-/ausschaltbar
_ Rückmeldung des Leistungsverbrauchs und Betriebsstunden (Fit for SMART GRID)
_ Geeignet für Gebäude gemäß EPBD/BREEAM/LEED durch automatische Constant Lumen Output-Einstellung
Produkteigenschaften
_
Versorgungsspannung: 220…240 V
_ Netzfrequenz: 0 Hz | 50 Hz | 60 Hz
_
Netzspannung: 198…264 V
_ Sicherheit nach EN 61347-1, 61347-2-3, 61347-2-13, 62384
_
Funkentstörung nach EN 55015:2007+A1:2007/CDN
_ Netzstromoberwellen nach EN 61000-3-2
28
17. Juni 2015, 08:56:04
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
DALI
50/220…240/1A4
Tel.+43(0)1 979OTi
099524
Fax.+43(0)1
979 099513LT2 FAN
[email protected] www.smart-mit-led.com
Länge
© 2015, OSRAM GmbH. Alle Rechte vorbehalten.
Seite 1 von 5
17. Juni 2015, 08:56:04
OTi DALI 50/220…240/1A4 LT2 FAN
110,0 mm
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
© 2015, OSRAM GmbH. Alle Rechte vorbehalten.
[email protected] www.smart-mit-led.com
Seite 3 von 5
29
LED Driver
smart mit led gmbh
series
■ “ „
LPF-16-30
LPF-16-36
LPF-16-42
LPF-16-48
LPF-16-54
24V
30V
36V
42V
48V
54V
CONSTANT CURRENT REGION Note.4 6.6 ~12V
8.25 ~ 15V
11 ~ 20V
13.2 ~ 24V
19.8 ~ 36V
23.1 ~ 42V
26.4 ~ 48V
29.7 ~ 54V
RATED CURRENT
1.34A
1.07A
0.8A
0.67A
16.5 ~ 30V
0.54A
0.45A
0.39A
0.34A
0.3A
RATED POWER
16.08W
16.05W
16W
16.08W
16.2W
16.2W
16.38W
16.32W
16.2W
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
150mVp-p
200mVp-p
250mVp-p
250mVp-p
250mVp-p
350mVp-p
VOLTAGE TOLERANCE Note.3 ±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
LINE REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION
±2.0%
±1.5%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
16ms at full load
Note.5 90 ~ 305VAC
47 ~ 63Hz
TOTAL HARMONIC DISTORTION
EFFICIENCY (Typ.)
THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input
86%
84%
86%
86%
86%
84%
86%
86%
AC CURRENT
INRUSH CURRENT (Typ.)
0.4A / 115VAC
0.25A / 230VAC 0.2A/277VAC
COLD START 45A(twidth=200μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
14 units (circuit breaker of type B) / 24 units (circuit breaker of type C) at 230VAC
3.5
SVT 18AWG*2C
13
Recommend Mounting Direction
Block Diagram
Fosc : 100KHz
86%
EMI FILTER
&
RECTIFIERS
RECTIFIERS
&
FILTER
POWER
SWITCHING
PFC
CIRCUIT
O.L.P.
DETECTION
CIRCUIT
PWM & PFC
CONTROL
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed.
34 ~ 40V
15 ~ 18V
17.5 ~ 21V 23 ~ 27V
28 ~ 35V
+V
-V
O.L.P.
95 ~ 108%
O.V.P.
41 ~ 49V
46 ~ 54V
54 ~ 63V
59 ~ 66V
Protection type : Shut down and latch off o/p voltage, re-power on to recover
Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
-35 ~ +70℃ (Refer to "Derating Curve")
20 ~ 95% RH non-condensing
Derating Curve
-40 ~ +80℃, 10 ~ 95% RH
Static Characteristics
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS
UL8750, CSA C22.2 No. 250.0-08,EN61347-1, EN61347-2-13 independent,EN62384,J61347-1,
J61347-2-13 approved,IP67 (optional) ; Design refer to UL60950-1, TUV EN60950-1
100
100
90
I/P-O/P:3.75KVAC
80
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015; EN61000-3-2 Class C (≧50% load) ; EN61000-3-3
80
70
60
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547,light industry level(surge 2KV), criteria A
LOAD (%)
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
EMC EMISSION
+V(Red)
-V(Black)
60
3.5
I/P
OVER TEMPERATURE
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
NOTE
ψ
473.3Khrs min. MIL-HDBK-217F (25℃)
148*40*32mm (L*W*H)
0.21Kg; 40pcs/9.4Kg/1.02CUFT
℃    ­  €   ‚ƒ „ ‚  … †… ‡   ˆ‰Š ‹ Š  ‡ Œ Ž   ‘ ˆ  ’““    ƒ      ‹ ” ‰  
 ‹ €‹ ‰ Š‡  • ” –To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently
connected to the mains.
LOAD (%)
OVER VOLTAGE
PACKING
T case
<0.75mA / 240VAC
Note.4
SHORT CIRCUIT
DIMENSION
3.6
ψ
3.6
230VAC /115VAC
PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
EMC IMMUNITY
MTBF
SJTW 18AWG
AC/N(Blue)
AC/L(Brown)
127 ~ 431VDC
POWER FACTOR (Typ.)
LEAKAGE CURRENT
300±20
3.5
500ms, 80ms / 230VAC
FREQUENCY RANGE
OVER CURRENT
148
300±20
Unit:mm
32
LPF-16-24
20V
VOLTAGE RANGE
Case No. : LPF-16A
series
※ T case: Max. Case Temperature.
LPF-16-20
Note.6 1500ms, 80ms / 115VAC at full load
Mechanical Specification
IP30
15V
HOLD UP TIME (Typ.)
OTHERS
LPF-16-15
SETUP, RISE TIME
PROTECTION
12V
DC VOLTAGE
INPUT
LPF-16-12
MODEL
OUTPUT
SPECIFICATION
LPF-16
16W Single Output Switching Power Supply
3.5
�—‡ ’ “ ˜ ™
�Œ„ ” ’ ‡ ’ ‡ ‡ ’ ‡ �š€ ‡ Œ“ � ‡
�“  ›Œ ‡ ˜•™
� Ⅱ  “œ
�  �›Œ‘ƒ˜ „ ˆŒ“€‘€
Ϊ
�” ˆ‰Š  ‡ �   �” ’ ˜ ˆŒ“€‘€
Ϊ
� 
40
LPF-16
16W Single Output Switching Power Supply
40
20
-35
-30
-15
0
15
30
50
AMBIENT TEMPERATURE (℃)
60
70
(HORIZONTAL)
60
50
40
90
100
125
135
145
155 165
175
180
200
230
305
INPUT VOLTAGE (V) 60Hz
File Name:LPF-16-SPEC 2015-05-28
File Name:LPF-16-SPEC 2015-05-28
30
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
31
LED Driver
smart mit led gmbh
series
LPF-25-15
LPF-25-20
LPF-25-24
LPF-25-30
LPF-25-36
LPF-25-42
LPF-25-48
LPF-25-54
15V
20V
24V
30V
36V
42V
48V
54V
CONSTANT CURRENT REGION Note.4 6.6 ~12V
8.25 ~ 15V
11 ~ 20V
13.2 ~ 24V
19.8 ~ 36V
23.1 ~ 42V
26.4 ~ 48V
29.7 ~ 54V
RATED CURRENT
2.1A
1.67A
1.25A
1.05A
16.5 ~ 30V
0.84A
0.7A
0.6A
0.53A
0.47A
RATED POWER
25.2W
25.05W
25W
25.2W
25.2W
25.2W
25.2W
25.44W
25.38W
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
150mVp-p
200mVp-p
250mVp-p
250mVp-p
250mVp-p
350mVp-p
VOLTAGE TOLERANCE Note.3 ±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
LINE REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION
±2.0%
±1.5%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
Note.7 1500ms, 80ms / 115VAC at full load
HOLD UP TIME (Typ.)
VOLTAGE RANGE
16ms at full load
Note.5 90 ~ 305VAC
PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION
EFFICIENCY (Typ.)
THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input
86%
84%
86%
86%
87%
85%
86%
86%
AC CURRENT
INRUSH CURRENT (Typ.)
0.4A / 115VAC
0.25A / 230VAC
0.2A/277VAC
COLD START 50A(twidth=200μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
12 units (circuit breaker of type B) / 21 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 240VAC
OVER VOLTAGE
OTHERS
NOTE
3.5
SVT 18AWG*2C
+V(Red)
-V(Black)
13
60
※ T case: Max. Case Temperature.
Recommend Mounting Direction
Block Diagram
Fosc : 100KHz
86.5%
EMI FILTER
&
RECTIFIERS
RECTIFIERS
&
FILTER
POWER
SWITCHING
PFC
CIRCUIT
O.L.P.
+V
-V
DETECTION
CIRCUIT
PWM & PFC
CONTROL
95 ~ 108%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed.
34 ~ 40V
15 ~ 18V
17.5 ~ 21V 23 ~ 27V
28 ~ 35V
41 ~ 49V
O.V.P.
46 ~ 54V
54 ~ 63V
59 ~ 66V
Protection type : Shut down and latch off o/p voltage, re-power on to recover
Shut down o/p voltage, recovers automatically after temperature goes down
-35 ~ +70℃ (Refer to "Derating Curve")
20 ~ 95% RH non-condensing
Derating Curve
Static Characteristics
-40 ~ +80℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 50℃)
100
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
100
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
ISOLATION RESISTANCE
EMC EMISSION
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015; EN61000-3-2 Class C (≧50% load) ; EN61000-3-3
EMC IMMUNITY
MTBF
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547,light industry level(surge 2KV), criteria A
DIMENSION
473.4Khrs min. MIL-HDBK-217F (25℃)
148*40*32mm (L*W*H)
PACKING
0.36Kg; 40pcs/ 15.4Kg/1.02CUFT
90
80
80
70
60
LOAD (%)
EMC
ψ
3.5
UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent , EN62384,J61347-1,
SAFETY STANDARDS Note.6 J61347-2-13 approved, IP67 approved ;Design refer to UL60950-1, TUV EN60950-1
SAFETY &
3.6
T case
O.L.P.
WORKING TEMP.
VIBRATION
3.6
ψ
I/P
OVER TEMPERATURE
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
SJTW 18AWG
AC/N(Blue)
AC/L(Brown)
230VAC /115VAC
47 ~ 63Hz
SHORT CIRCUIT
300±20
3.5
127 ~ 431VDC
POWER FACTOR (Typ.)
Note.4
Unit:mm
500ms, 80ms / 230VAC
FREQUENCY RANGE
OVER CURRENT
148
300±20
℃    ­  €   ‚ƒ „ ‚  … †… ‡   ˆ‰Š ‹ Š  ‡ Œ Ž   ‘ ’   “Œ ‡   ‡ ƒ ˆ  ”••    –      ‹ ’ ‰  
 ‹ €‹ ‰ Š‡  — ‹  ‰Œ  “  ˆ‰Š      LOAD (%)
SETUP, RISE TIME
Case No.: LPF-16A
IP67
12V
DC VOLTAGE
PROTECTION
LPF-25-12
MODEL
INPUT
Mechanical Specification
series
32
SPECIFICATION
OUTPUT
LPF-25
25W Single Output Switching Power Supply
40
■ • „
�˜‡ ” • ™ š
�Œ„ ’ ” ‡ ” ‡ ‡ ” ‡ �›€ ‡ Œ• � ‡
�• �•  œŒ‘ƒ ‡ ™‘š
� Ⅱ  •ž
�  �’ ˆ‰Š  ‡ �   �’ ” ”  � 
3.5
LPF-25
25W Single Output Switching Power Supply
40
20
-35
-30
-15
0
15
30
50
AMBIENT TEMPERATURE (℃)
60
70
(HORIZONTAL)
60
50
40
90
100
125
135
145
155 165
175
180
200
230
305
INPUT VOLTAGE (V) 60Hz
File Name:LPF-25-SPEC 2015-05-28
File Name:LPF-25-SPEC 2015-05-28
32
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
33
LED Driver
smart mit led gmbh
LPF-40
40W Single Output Switching Power Supply
series
■ ‹ „
IP67
™ ‚–‚ š
LPF-40
40W Single Output Switching Power Supply
Mechanical Specification
Case No. LPF-60B
series
Unit:mm
162.5
3.5
300±20
3.5
3.6
3.6
T case
ψ
300±20
+V(Red)
-V(Black)
60
13
SJTW 18AWG×2C
43
ψ
AC/N(Blue)
AC/L(Brown)
3.5
�Ž‘ • ‹ ™ š
�›€ ‘ …‹ �  ˜œ
�…„ Š • ‘ • ‘ ‘ • ‘ � ‘
�‹ �‹  ‡…“ƒ ‘ ™“š
� Ⅱ  ‹ˆ
�  �Š Œ‰†  ‘ �   �Š • •  � 
SVT 18AWG×2C
3.5
™ ” ‚–‚ š
※ T case: Max. Case Temperature.
LPF-40-12
LPF-40-15
LPF-40-20
LPF-40-24
LPF-40-30
LPF-40-36
LPF-40-42
LPF-40-48
LPF-40-54
12V
15V
20V
24V
30V
36V
42V
48V
54V
CONSTANT CURRENT REGION Note.4 7.2 ~12V
9 ~ 15V
12 ~ 20V
14.4 ~ 24V
18 ~ 30V
21.6 ~ 36V
25.2 ~ 42V
28.8 ~ 48V
32.4 ~ 54V
RATED CURRENT
3.34A
2.67A
2A
1.67A
1.34A
1.12A
0.96A
0.84A
0.76A
RATED POWER
40.08W
40.08W
40W
40.08W
40.2W
40.32W
40.32W
40.32W
41.04W
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
150mVp-p
200mVp-p
250mVp-p
250mVp-p
250mVp-p
350mVp-p
VOLTAGE TOLERANCE Note.3 ±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
LINE REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION
±2.0%
±1.5%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
OUTPUT
SETUP, RISE TIME
Note.7 1000ms, 80ms / 115VAC at full load
HOLD UP TIME (Typ.)
VOLTAGE RANGE
INPUT
16ms/230VAC
Note.5 90 ~ 305VAC
47 ~ 63Hz
PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input
EFFICIENCY (Typ.)
84%
86%
88%
85%
87%
0.6A / 115VAC
0.3A / 230VAC
0.25A/277VAC
COLD START 50A(twidth=210μs measured at 50% Ipeak) at 230VAC
12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 240VAC
Note.4
OVER VOLTAGE
Fosc : 100KHz
EMI FILTER
&
RECTIFIERS
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
PFC
CIRCUIT
+V
-V
O.L.P.
46 ~ 54V
54 ~ 63V
DETECTION
CIRCUIT
PWM & PFC
CONTROL
O.V.P.
59 ~ 66V
Derating Curve
Static Characteristics
20 ~ 95% RH non-condensing
-40 ~ +80℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 50℃)
100
100
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
90
UL8750, CSA C22.2 No. 250.0-08(except for 48V, 54V), ENEC EN61347-1, EN61347-2-13 independent, EN62384, IP67,
80
J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015, EN61000-3-2 Class C (≧60% load) ; EN61000-3-3
PACKING
NOTE
41 ~ 49V
I/P-O/P:3.75KVAC
DIMENSION
Block Diagram
Protection type : Shut down and latch off o/p voltage, re-power on to recover
WITHSTAND VOLTAGE
EMC IMMUNITY
MTBF
OTHERS
Hiccup mode, recovers automatically after fault condition is removed.
34 ~ 40V
15 ~ 17V
17.5 ~ 21V 23 ~ 27V
28 ~ 35V
-40 ~ +70℃ (Refer to "Derating Curve")
EMC EMISSION
90%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Shut down o/p voltage, re-power on to recover
SAFETY STANDARDS Note.6
90%
95 ~ 108%
WORKING TEMP.
VIBRATION
88.5%
O.L.P.
OVER TEMPERATURE
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
EMC
88%
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
SHORT CIRCUIT
SAFETY &
16ms/115VAC at full load
127 ~ 431VDC
POWER FACTOR (Typ.)
TOTAL HARMONIC DISTORTION
OVER CURRENT
PROTECTION
500ms, 80ms / 230VAC
FREQUENCY RANGE
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
Recommend Mounting Direction
80
70
60
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level(surge 2KV), criteria A
438.8Khrs min. MIL-HDBK-217F (25℃)
162.5*43*32mm (L*W*H)
0.44Kg; 32pcs/15.08Kg/0.93CUFT
℃    ­  €   ‚ƒ „ ‚ … ­†‡‡ˆ ‰†Š ‹ Œ‰† †ŽŒ‰­
†  ‘ … ’   “ Š   ” … ‘   ‘ ƒ Œ  •‹‹    –      — Š ‰  
 — €— ‰ †‘  ˜ —  ‰…  ”  Œ‰†      LOAD (%)
DC VOLTAGE
LOAD (%)
MODEL
32
SPECIFICATION
40
20
-40
-30
0
15
30
40
50
AMBIENT TEMPERATURE (℃)
60
70 (HORIZONTAL)
60
50
40
90
100
125
135
145
155 165
175
180
200
230
305
INPUT VOLTAGE (V) 60Hz
File Name:LPF-40-SPEC 2015-05-28
File Name:LPF-40-SPEC 2015-05-28
34
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
35
LED Driver
smart mit led gmbh
series
IP67
™ ‚–‚ š
LPF-60
60W Single Output Switching Power Supply
Mechanical Specification
Case No. LPF-60B
series
Unit:mm
162.5
3.5
300±20
3.5
3.6
ψ
AC/N(Blue)
AC/L(Brown)
3.6
T case
ψ
300±20
+V(Red)
-V(Black)
60
13
SJTW 18AWG×2C
43
■ ‹ „
�Ž‘ • ‹ ™ š
�›€ ‘ …‹ �  ˜œ
�…„ Š • ‘ • ‘ ‘ • ‘ � ‘
�‹ �‹  ‡…“ƒ ‘ ™“š
� Ⅱ  ‹ˆ
�  �Š Œ‰†  ‘ �   �Š • •  � 
3.5
LPF-60
60W Single Output Switching Power Supply
SVT 18AWG×2C
3.5
※ T case: Max. Case Temperature.
™ ” ‚–‚ š
32
SPECIFICATION
MODEL
LPF-60-12
LPF-60-15
LPF-60-20
LPF-60-24
LPF-60-30
LPF-60-36
LPF-60-42
LPF-60-48
LPF-60-54
12V
15V
20V
24V
30V
36V
42V
48V
54V
CONSTANT CURRENT REGION Note.4 7.2 ~12V
9 ~ 15V
12 ~ 20V
14.4 ~ 24V
18 ~ 30V
21.6 ~ 36V
25.2 ~ 42V
28.8 ~ 48V
32.4 ~ 54V
RATED CURRENT
5A
4A
3A
2.5A
2A
1.67A
1.43A
1.25A
1.12A
RATED POWER
60W
60W
60W
60W
60W
60.12W
60.06W
60W
60.48W
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
150mVp-p
200mVp-p
250mVp-p
250mVp-p
250mVp-p
350mVp-p
DC VOLTAGE
OUTPUT
VOLTAGE TOLERANCE Note.3 ±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
±4.0%
LINE REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION
±2.0%
±1.5%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
SETUP, RISE TIME
Note.7 1000ms, 80ms / 115VAC at full load
HOLD UP TIME (Typ.)
VOLTAGE RANGE
INPUT
16ms/230VAC
Note.5 90 ~ 305VAC
16ms/115VAC at full load
127 ~ 431VDC
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION
EFFICIENCY (Typ.)
THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input
90%
86%
88%
90%
90%
87%
90%
89%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
0.8A / 115VAC
0.4A / 230VAC
0.32A/277VAC
COLD START 55A(twidth=270μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
8 units (circuit breaker of type B) / 14 units (circuit breaker of type C) at 230VAC
OVER CURRENT
Block Diagram
Fosc : 100KHz
90%
EMI FILTER
&
RECTIFIERS
I/P
Note.4
OVER VOLTAGE
O.L.P.
41 ~ 49V
46 ~ 54V
O.V.P.
54 ~ 63V
59 ~ 66V
Protection type : Shut down and latch off o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover
WORKING TEMP.
-40 ~ +70℃ (Refer to "Derating Curve")
Derating Curve
Static Characteristics
20 ~ 95% RH non-condensing
-40 ~ +80℃, 10 ~ 95% RH
100
100
±0.03%/℃ (0 ~ 50℃)
90
VIBRATION
ISOLATION RESISTANCE
EMC EMISSION
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015, EN61000-3-2 Class C (≧60% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level(surge 2KV), criteria A
440.5Khrs min. MIL-HDBK-217F (25℃)
162.5*43*32mm (L*W*H)
DIMENSION
0.45Kg; 32pcs/15.4Kg/0.93CUFT
PACKING
℃ EMC IMMUNITY
MTBF
OTHERS
NOTE
   ­  €   ‚ƒ „ ‚ … ­†‡‡ˆ ‰†Š ‹ Œ‰† †ŽŒ‰­
†  ‘ … ’   “ Š   ” … ‘   ‘ ƒ Œ  •‹‹    –      — Š ‰  
 — €— ‰ †‘  ˜ —  ‰…  ”  Œ‰†      80
80
230VAC
Input only
70
60
50
LOAD (%)
EMC
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750, CSA C22.2 No. 250.0-08(except for 48V, 54V), ENEC EN61347-1, EN61347-2-13 independent, EN62384, IP67,
SAFETY STANDARDS Note.6
J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
LOAD (%)
SAFETY &
DETECTION
CIRCUIT
PWM & PFC
CONTROL
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed.
34 ~ 40V
15 ~ 17V
17.5 ~ 21V 23 ~ 27V
28 ~ 35V
+V
-V
O.L.P.
95 ~ 108%
OVER TEMPERATURE
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
RECTIFIERS
&
FILTER
POWER
SWITCHING
PFC
CIRCUIT
<0.75mA / 240VAC
SHORT CIRCUIT
PROTECTION
500ms, 80ms / 230VAC
FREQUENCY RANGE
LEAKAGE CURRENT
Recommend Mounting Direction
40
20
-40
-30
0
15
30
40
50
AMBIENT TEMPERATURE (℃)
60
70 (HORIZONTAL)
60
50
40
90
100
125
135
145
155 165
175
180
200
230
305
INPUT VOLTAGE (V) 60Hz
File Name:LPF-60-SPEC 2015-05-28
File Name:LPF-60-SPEC 2015-05-28
36
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
smart mit led gmbh — Hainbachgasse 14 - 1140 Wien
Tel.+43(0)1 979 099524 Fax.+43(0)1 979 099513
[email protected] www.smart-mit-led.com
37
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement