TOUCH 1500

User Interface termInal for raychem nGc systems InstallatIon InstrUctIons

Touch 1500-HAZ-CPU and

Touch 1500-HAZ-TS installed in a panel

Description

The Touch 1500-HAZ is a panel mounted touch screen display used in conjunction with Raychem NGC-40 and NGC-20 (Europe only) control and monitoring devices. The Touch 1500-HAZ display is rated NEMA

4X (IP65) and can be mounted indoors or outdoors in a hazardous location. For outdoor installation, a space heater will be required in the panel for low ambient conditions. The Touch 1500-HAZ kit includes all hardware required for mounting in a suitable electrical panel.

Additional materials are required for electrical connections and are detailed below. These instructions describe how to mount the Touch

1500-HAZ in an electrical panel and are intended only for personnel experienced in panel construction.

tools requireD

• Metal file • Masking tape

• Phillips screwdriver • #16 (3/16) drill bit

• Jig saw (recommend using carbon steel blade with 24TPI)

ADDitionAl MAteriAls

(to be orDereD sepArAtely)

ApprovAls / certificAtions

Hazardous locations

Class I, Division 2 Groups A, B, C, D

Touch 1500-HAZ-CPU Touch 1500-HAZ-TS

40JY

I.T.E. for use in Hazardous

Locations

23BJ

I.T.E.

Hazardous location designation

Class I, Division 2

Groups A, B, C, D, T5

Hazardous Locations

I.T.E. for use in Hazardous

Locations

316N/23BJ

Hazardous location designation

Class I, Division 2

Groups A, B, C, D, T4A

Hazardous Locations

General

Area of use

Supply voltage

Nonhazardous or hazardous locations, indoor or outdoor (Type 4X, IP66)

Touch 1500-HAZ-CPU: 10 – 36 Vdc

Touch 1500-HAZ-TS: 19 – 30 Vdc

Amperage rating Touch 1500-HAZ-CPU: 2 A @ 24 Vdc

Touch 1500-HAZ-TS: 2.62 A @ 24 Vdc

Operating temp (CE)* Touch 1500-HAZ-CPU: –20°C to 60°C (–4°F to 140°F)

Touch 1500-HAZ-TS: –20°C to 60°C (–4°F to 140°F)

Operating temp (UL)* Touch 1500-HAZ-CPU: –10°C to 60°C (14°F to 140°F)

Touch 1500-HAZ-TS: 0°C to 50°C (32°F to 122°F)

Storage temperature –30°C to 80°C (–22°F to 176°F)

Dimensions (W x D x H) Touch 1500-HAZ-CPU: 85.5 x 139 x 152 mm

(3.4 x 5.5 x 6 in)

Touch 1500-HAZ-TS: 422 x 68 x 338 mm

(16.61 x 2.68 x 13.31 in)

Alarm outputs

Relay output One Form C relay rated 3 A @ 250 Vac.

Relay is used as a common alarm.

* Note: Temperature ratings are without space heaters

1

1

1

1

qty catalog number

1

Description

Touch 1500-HAZ-TS Touch Screen

Touch 1500-HAZ-CPU Computer

Touch 1500-HAZ-CK Cables/Mounting Hardware:

4-ft USB A/B Cable

4-ft VGA Cable

Touchscreen Mounting Clips

(1) 8-ft DB9 to RS-485 Cable

Mfg

TTC

TTC

TTC

ADAM-4069-C1D2 Alarm Module

Push-to-Test Alarm Light

(24 Vdc)

Advantech

Mfg/ptM pn

10332-011

10332-010

10332-027

network connection

remote port  (com 3)

Connects to common alarm module (ADAM-4069)

RS-485 A non-insulated 9 pin D sub male

Data rate To 9600 to 57000 baud

field port  (com 4) Not used

RS-485 A non-insulated 9 pin D sub male

Data rate To 9600 baud

lAn

usb ports

10/100 Base-T Ethernet port with Link and

Activity Status LEDs (X3)

USB 2.0 host ports (X4)

lcD Display

Display

Touch Screen

LCD is a 15-in XGA, color TFT transflective device with integral LED backlighting.

5-wire resistive touch screen interface with enhanced ITO film for user entry.

WARNING:

The TOUCH 1500 is an electronic unit. During installation, take the following precautions to avoid damage to its electronic components.

inDustriAl HeAt trAcinG solutions

• Handle with care to avoid mechanical damage.

• Keep electronics dry.

• Avoid exposure to static electricity.

• Avoid contamination with metal filings, liquids, or other foreign matter.

• Use agency-approved conduit bushings, adapters, and cable glands to keep the enclosure protected from dust and fluids.

GB-RaychemTouch1500HAZ-IM-H58823      INSTALL-216      05/15 1 / 10

provide suitable panel enclosure, and Determine locations for toucH 1500-HAZ Assembly in panel

1. provide suitable panel enclosure

To protect its electronic components, the Touch 1500-HAZ must be mounted in a non-hazardous location panel with a minimum of IP32 (NEMA 1) enclosure or hazardous location panel with a minimum IP65 (NEMA 4) enclosure. The Touch 1500 assembly comes with a sealing gasket and hardware to mount the touchscreen.

The Raychem Touch 1500-HAZ is designed for operation in ambient temperatures from 0°C to 50°C (32°F to 122°F). If the ambient temperature is outside this range, a space heater with screen window kit and/or cooling fan will be required in the panel.

2. Determine locations for the touch 1500-HAZ-ts and touch

1500-HAZ-cpu assembly in the electrical panel

The Touch 1500-HAZ-TS should be located on the front of the panel near eye level (for convenient viewing).

The Touch 1500-HAZ-CPU should be located on the sidewall or backpan of the enclosure.

The Touch 1500-HAZ assembly is an electronic unit and must not be located where it will be exposed to strong magnetic fields or excessive vibration.

Panel door

Touch 1500-HAZ assembly location

Panel

Panel alarm light

Touchscreen alarm light

21

23

25

27

29

11

13

15

17

19

5

7

9

3

1

31

33

35

37

39

C1 C2 C3 C4 C5 C6 C7 C8 C9 C10

CB1

CB3

CB5

CB7

CB9

CB11

CB13

CB15

CB17

CB19

CB21

CB23

CB25

CB27

CB29

CB31

CB33

CB35

CB37

CB39

CB22

CB24

CB26

CB28

CB30

CB32

CB34

CB36

CB38

CB40

CB42

CB2

CB4

CB6

CB8

CB10

CB12

CB14

CB16

CB18

CB20

12

14

16

18

20

6

8

2

4

10

22

24

26

28

30

36

38

32

34

40

inDustriAl HeAt trAcinG solutions

GB-RaychemTouch1500HAZ-IM-H58823      INSTALL-216      05/15 2 / 10

cut opening and Mount toucH 1500-HAZ on front of panel

.

1. locate the toucH 1500-HAZ on the front of panel

Locate the Touch 1500-HAZ assembly ion the front of the panel at the level convenient for viewing. Make sure the cover on the back of the assembly will not interfere with existing panel hardware.

4. Mount the user interface assembly on the panel door

• Place the Touch 1500-HAZ-TS assembly in position. Secure the screen to the enclosure with the 10 mounting clips.

Panel door

Panel Door

396 mm

15.59 in.

Cutting

Area

TOUCH 1500 display with sealing gasket

TOUCH 1500 display

note: Cutting the opening for the display is a craft sensitive procedure; if it is not done correctly, the panel door can be damaged. The procedure for laying out and cutting the opening for the display must be undertaken with care and by personnel qualified and experienced in panel construction.

2. prepare and mark the position of the display opening and mounting holes

• Use the cut-out directions to lay out the opening for the Touch

1500-HAZ-TS.

• Apply two layers of masking tape around the outer perimeter of the intended opening to prevent scratching the panel surface with the jigsaw.

3. cut the display opening

Cut the opening for the Touch 1500-HAZ-TS with a jigsaw using a 24 TPI blade. Take care not to damage the panel door.

Remove all rough edges and burrs with a metal file before proceeding.

note: The following steps are most easily accomplished if the panel door is on a horizontal surface.

Inside of panel door

• Place the supplied mounting clips in each slot along the sides of the Touch 1500-HAZ-TS. Only fasten hand tight.

TOUCH 1500 display

Mounting clips

• Look at the front of the panel, and align the Touch 1500-HAZ-

TS assembly so it is level (loosen clips if necessary to reposition the assembly).

• After the display is properly positioned, tighten the mounting clips. Do not overtighten and risk damage to hardware.

inDustriAl HeAt trAcinG solutions

GB-RaychemTouch1500HAZ-IM-H58823      INSTALL-216      05/15 3 / 10

toucH 1500 cut out Dimensions

296 mm (11.65 in)

Panel Cut Out

396 mm

(15.59 in)

Top of Display

Panel Cut Out Area

Drawing

NOT TO SCALE

inDustriAl HeAt trAcinG solutions

GB-RaychemTouch1500HAZ-IM-H58823      INSTALL-216      05/15 4 / 10

touch 1500-HAZ-ts port Diagram

Not used USB-B Touchscreen interface to CPU

Incoming power

Not used VGA Touchscreen interface to CPU touch 1500-HAZ-cpu port Diagram (back view)

VGA (display)

CPU to touchscreen interface

COM3

RS-485

Remote

Port

USB ports

(X2)

Not used

USB ports (X2)

VGA

USB USB

COM3

RS-232/422/485

COM4

RS-232/422/485

USB LAN2 AUDIO

LAN3

LAN1

COM4

RS-485

Field

Port

Ethernet ports (X3)

ADAM-4069 pin Diagram touch 1500-HAZ-cpu port Diagram (side view)

Power switch

Incoming power

Not used

Optional mouse/ keyboard input

ADAM-4069

Relay Output

Module

8 Outputs

inDustriAl HeAt trAcinG solutions

GB-RaychemTouch1500HAZ-IM-H58823      INSTALL-216      05/15 5 / 10

connect power

Connect 24 Vdc to the connection fittings to the Touch 1500-HAZ-CPU,

Touch 1500-HAZ-TS, ADAM-4069 module, and ADAM-4510I modules per the schematic on the following pages.

Line

100 – 240 Vac

50/60 Hz

Terminal block

Neutral

Terminal block

Terminal block

L N

INPUT

AC 100-240V

Phoenix Power Supply

QUINT-PS-100-240AC/24DC/10EX

Output DC 24V 10A

13 14

DC

OK + + – –

Terminal block

Alarm Lamp

Alarm

Lamp

24 V Lamp

Idec Switch/Lamp

1

2

4

3

Terminal blocks

ADAM-4069

Relay Output

Module

8 Outputs

Terminal block Terminal block

+24 Vdc

+ –

inDustriAl HeAt trAcinG solutions

GB-RaychemTouch1500HAZ-IM-H58823      INSTALL-216      05/15 6 / 10

+

+24 Vdc

Power switch

Touch 1500-HAZ-CPU

Incoming power

Not used

G

– +

–

+

Terminal block Terminal block

VGA Touchscreen interface to CPU

Not used

Touch 1500-HAZ-TS

Incoming power USB-B

TS interface

Not used

G

– +

Terminal block Terminal block

+24 Vdc

–

inDustriAl HeAt trAcinG solutions

GB-RaychemTouch1500HAZ-IM-H58823      INSTALL-216      05/15 7 / 10

field port communication rs-485 common Alarm light and Alarm relay

Mount the supplied ADAM-4069 modules on a DIN rail inside the panel enclosure. Mount the alarm lights on the panel’s door below the touch screen.

Wire per the schematic below.

USB VGA

Touch 1500-HAZ-TS

VGA

VGA cable

COMM 3

USB

Touch 1500-HAZ-CPU

To Alarm Lamp on Panel Door

ADAM-4069

Relay Output

Module

8 Outputs

Custom 9 pin RS-485 cable

inDustriAl HeAt trAcinG solutions

GB-RaychemTouch1500HAZ-IM-H58823      INSTALL-216      05/15 8 / 10

servicing

The Touch 1500-HAZ-CPU and Touch 1500-HAZ-TS contains no user-serviceable parts. Contact your Tyco Thermal Controls representative for service and an authorization number if required.

cleaning

The touchscreen are of the Touch 1500-HAZ-TS may be cleaned with a damp or dry cloth. Typical window cleaning agents may be applied to aid in the removal of dirt, dust and grease. Do not use

abrasive cleaners.

inDustriAl HeAt trAcinG solutions

GB-RaychemTouch1500HAZ-IM-H58823      INSTALL-216      05/15 9 / 10

WWW.pENTAIRTHERMAl.COM

NORTH AMERICA

Tel: +1.800.545.6258

Fax: +1.800.527.5703

Tel: +1.650.216.1526

Fax: +1.650.474.7711

[email protected]

EuROpE, MIddlE EAsT, AfRICA

Tel: +32.16.213.511

Fax: +32.16.213.603

[email protected]

AsIA pACIfIC

Tel: +86.21.2412.1688

Fax: +86.21.5426.2937

[email protected]

lATIN AMERICA

Tel: +1.713.868.4800

Fax: +1.713.868.2333

[email protected]

Pentair is owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

© 2012-2015 Pentair.

inDustriAl HeAt trAcinG solutions

GB-RaychemTouch1500HAZ-IM-H58823      INSTALL-216      05/15 10 / 10