UltraPower PG-805 User guide
Planet Green
PG-805
and
PG-503
Energy Saving
Multimedia Surge Protectors
Convenient
On/Off
USB
Remote
Saves
Energy
PG-503
PG-805
Click for
User Guide
Click for
User Guide
Protect these
and more
Our new UltraPower® Planet Green™ product line reveals our commitment to environmentally
conscious engineering. The PG-805 and PG-503 are the first component introductions to this new line.
The PG-805 features three always on outlets as well as five energy saving outlets, while the PG-503 offers
two always on outlets plus three energy saving outlets. The remote controller turns the energy saving outlets
completely on or off, reducing cost and saving energy. It also reduces noise via high frequency capacitors
and a choke and completes the package with robust AC power line surge protection that saves your valuable
components. Our advanced system exploits the absorptive powers of the latest X3™ MOVs (Metal Oxide
Varistors) made with improved materials and technology.
Saving energy, power filtering, surge protection and remote control of its five energy saving outlets puts
UltraPower on the leading edge of Planet Green power!
Always On outlets
provide continuous
power for connected
components
THE ULTIMATE CONNECTION®
Energy Saving outlets
provides complete
power disconnection
Ultralink Products, Inc.
Markham, Ontario, Canada L3R 3L1
Tel: (905) 479-2831 Fax: (905) 479-9347
Email: [email protected]
Bonus USB Charging Ports
2 USB charging ports provide 5V and
a total of 1.5 amps of power
Ultralink/XLO Products, Inc.
Ontario, California, U.S.A. 91761
Tel: (909) 947-6960 Fax: (909) 947-6970
Email: [email protected]
www.ultralinkproducts.com
PG-805 and PG-503 Features and Specifications
Models
PG-805
PG-503
FEATURES
Advanced PurePower™ Filtration Circuitry
Yes
Yes
Microprocessor Controlled Auto Reset
Yes
Yes
Ground OK / Protection On LED
Yes
Yes
Total Number of Outlets
8
5
Always On Outlets
3
2
Energy Saving Outlets
5
3
AC Power Cord Length
8ft. / 2.5meter
n/a
3-Prong NEMA
3-Prong NEMA
AC Plug Type
AGENCY/ Warranty / Policy
Agency Approval
c(UL) 1449 3rd Edition
Product Warranty Duration
Limited 5 year Warranty
AC SPECIFICATIONS
Patented Surge-Smart™ Technology
Yes
Yes
Patented X-3™ Metal Oxide Varistors (MOV)
Yes
Yes
Thermal Fusing
Yes
Yes
Lightning Protection
Yes
Yes
Catastrophic Surge Protection
Yes
Yes
2,160 Joules
1,080 Joules
72,000 A
72,000 A
Single Pulse Energy Dissipation
Spike Capacity
EMI / RFI Noise Filtration
58 dB
70 dB
120 VAC @ 60 Hz
120 VAC @ 60 Hz
330 V
400 V
131 V RMS / 185 V Peak
131 V RMS / 185 V Peak
Protection Modes
L - N, N - G, L - G
L - N, N - G, L - G
Maximum Current Rating
15 A (1,800 W)
15 A (1,800 W)
< 0.7 W
< 0.7 W
<1 Nanosecond
<1 Nanosecond
Line Voltage
Clamping Level
Initial Clamping Level
Energy Saving Outlets in Standby Power
Response Time
PHONE SPECIFICATIONS
Clamping Level
Capacitance
Supression Modes
Connection
RJ11 (275V), RJ45 (25V)
n/a
30 pf (approximate)
n/a
Metallic and Longitudinal
n/a
RJ45/RJ11 Combo
n/a
DSS/COAX SPECIFICATIONS
n/a
Protects against destructive surges on
cable, DSS and cable modems
PG-503
User Guide
Introduction
Thank you for purchasing the
UltraPower® Planet Green™ PG-503
Energy Saving Surge Protector with
USB Remote On/Off Controller.
The Planet Green product line marks
our commitment to environmentally
conscious engineering.
Save Energy, Save Money
Most electronic devices draw power even in standby mode, an
obvious waste of resources. The PG-503 features a USB Remote
On/Off Controller making it simple and convenient to turn off your
devices automatically when they are not in use.
The PG-503 also reduces noise with high frequency capacitors
and a choke. Additionally, the robust AC power line surge protector
saves your valuable components from surges and voltage spikes.
We’ve used the latest X3™ MOVs (Metal Oxide Varistors) made
with improved materials and technology.
1
Features
Energy Saver Indicator Light
A blue LED indicates the 3 Energy Saving Outlets are on
USB Remote On/Off Controller
3 Energy Saving Outlets On or Off with
the press of a button
Ground Fault Indicator Light
A red LED indicates the power outlets are not properly grounded
Always On Indicator Light
A green LED indicates the 2 Always On Outlets are active
3 Energy Saving Outlets
USB Remote turns outlets
completely on and off
et
-fe
25
2 USB
Charging Ports
Provides 5 volts, 1.5 amps
maximum total for both ports
Manual On/Off and
Learning Button
Press the button to power the
Energy Saving Outlets On/Off
or to sync the Remote Controller
with one or more PG-503s
2 Always On Outlets
Coaxial Cable Surge Protection
Protects against destructive surges riding
the coax cable line
3
Provides continuous power for
connected components
4
Setup
Connecting your equipment
USB Charging Ports
The PG-503 has 2 “Always On” outlets that
provide continuous power for devices that are
designed to remain on at all times.
Typical Always On device are DVR,
Modems, Routers, Alarm Clocks, etc.
Two USB charging ports provide 5V
and a total of 1.5 amps of power.
Coaxial Cable Surge Protection
Protects against destructive surges
riding the coax cable line
DVR Cable/Sat
DVR Cable/Sat
Modem / Router
TV
Notebook
Modem / Router
TV
Notebook
The 3 “Energy Saver” outlets are control by
the USB remote. Components not requiring
continuous power can be plugged into the
Energy Saver outlets.
See below for a list of devices that can be
switched off when not in use.
Reading the PG-503’s LEDs
Green LED light on – unit is actively
protecting against surge and
voltage spikes
Red LED light on – check for ground
related problems
Blue LED light on – Energy Saving
outlets have power
4
Media Player
A/V Receiver
A/V Components
Gaming
Media Player
A/V Receiver
A/V Components
Gaming
Speakers
Subwoofer
Scanner
Printer
Speakers
Subwoofer
Scanner
Printer
5
Using the USB Remote
The USB Remote can be used in two different ways.
Learning Button
1.It can be used free standing or as a wall
mounted switcher. You can simply turn
the energy saver On/Off with a quick
press of its top button.
The “LEARNING” button has two functions:
1. To synchronize with the USB remote
2.Manual switch for the Energy Saving Outlets
2.Or connect the USB remote to one of the
main components with a USB port such as
a TV, computer or laptop.
When the USB Remote is plugged into the
component’s USB port, it detects power on
the connected port and sends On/Off signal
instructions to the PG-503.
Some USB ports may have continuous power. This is indicated
when the USB remote continues to light up after the equipment is
turned off. This means the USB port will not work with the PG-503
– please use another USB port or trigger device.
The USB Remote works within a
range of up to 25-feet, this may vary
depending on room layout, building
materials and local interference.
et
-fe
25
Remote Controller’s Range
Synchronizing USB Remote with PG-503
The USB Remote and the PG-503 arrives paired and ready to
use. To synchronize the Remote with the PG-503*, position
them near each other and follow the steps below.
The Energy Saver function shuts down about 2.5 minutes after the
main USB component is turned off, allowing enough time to shut
down peripheral components if desired.
6
Operating
1. T
urn on the TV, computer, laptop or any USB component
(trigger device) before synchronizing.
2.Press and hold the “LEARNING” button on the side of
PG-503 for five seconds. The blue “Energy Saver” LED will
start flashing, then release the “LEARNING” button.
3.Press the button on the USB remote or connect the USB
Remote directly to the main component’s USB port within 5
seconds. Once the remote detects power in the component,
it will send a wireless code to the PG-503.
4.Once the PG-503 has successfully learnt the code from
the remote, the blue “Energy Saver” LED will change from
flashing to solid.
* You can synchronize multiple PG-503 with a single Remote.
It is important to note that each PG-503 surge protector must be
plugged directly into an AC wall outlet and not daisy-chained together.
7
Trouble shooting Guide
Mounting Screw Removal
My equipment won’t turn on
The PG-503 is shipped with a mounting
screw that will allow you to affix the unit
to your wall outlet.
1. C
heck if it is plugged into the “Always On” or “Energy Saving”
Outlets.
2.Switch the “Energy Saving Outlets” on with the “LEARNING”
button.
USB Remote can’t turn on or off my equipment
1. C
heck if it is plugged into the “Always On” or “Energy Saving”
outlets.
2. The USB Remote is out of its effective range.
3. Press the button on the USB Remote, if the red LED light does
not blink, replace the CR1632 3V Lithium battery in the remote.
Specifications
8
4. Re-synchronize the USB Remote with PG-503.
Electrical Rating
15A / 120V, 60Hz, 1800 Watts
Surge Suppression
1080 Joules
Red Ground Fault LED is on
Clamping Voltage
400 V
USB Charger
2 ports (5V, total 1.5 Amps)
The red Ground Fault LED indicates improper home wiring.
Consult a licensed electrician to resolve the issue. UltraLink® is not
responsible for damages caused by improper wiring.
DSS/COAX
DSS/ COAX Connector Protection
Stand-by power
<0.7W
USB device does not charge
USB Remote Wireless Range
Up to 25 feet (Open Space)
USB Remote Battery Type
CR1632 3V Lithium battery
Exceeding 1.5 amps triggers the overload protection circuit and
disables charging. Unplug your portable device and ensure it does
not exceed a total draw of 1.5 amps.
9
WARNING – Power Sources
Do not plug your PG-503 into a power outlet that differs from that indicated
for safe use. If you don’t know the type of electrical power to your home
please consult the local power company.
WARNING – Grounding and Polarization
Your Planet Green PG-503 is equipped with a three-wire grounded AC
power cord. It’s designed for use with three-terminal grounded outlets only.
If the plug doesn’t fit directly into your outlet do not force it in and contact
an electrician to install a properly polarized outlet. Do not alter the plug or
extension cord in any way to accommodate an ungrounded, two-prong
outlet. Never defeat the grounding by using a 3-to-2 prong adapter and we
advise calling an electrician to install properly grounded outlets.
If you have rooftop antennas, satellite dishes, or any other component with
wiring connected to your PG-503 make sure it is properly grounded. Refer
to grounding techniques found in Section 810 of the National Electrical Code
(NEC), ANSI/NFPA 70 (in Canada, Part 1 of the Canadian Electrical Code).
Using these techniques protect against voltage surges and static electric
charges. Never place any part of an antenna or other such device near
overhead power lines, or any other power circuit. Do not touch power lines
or power circuits which may cause severe physical injury and possibly
death.
WARNING – Storm Precautions
If a lightning storm occurs immediately disconnect incoming signal and
power lines such as cable and telephone. This device protects connected
electronic equipment from AC power surges up to a certain point. The
PG-503 is not rated, however, as a lightning arrestor, so it will not afford
protection from lightning strikes near power lines, the home, electrical
service entrance or antennas.
WARNING – No User Serviceable Parts Inside PG-503
If, for any reason, your PG-503 is not operating properly, do not open any
part of the unit such as the cover and attempt any sort of repair. Unplug the
unit and consult the manual for warranty and service information.
CAUTION – Do Not Expose To Heat
Do not place your PG-503 in direct sunlight or near wall heaters, space
heaters, or any enclosed space that may experience extreme temperature
increases.
WARNING – Avoid Electrical Shocks
Never use your PG-503 if liquid of any kind is spilled on or into it. Do not
use the PG-503 near areas where rain leaks or splashes in, or where water
is regularly used as in bathroom or kitchen. Not for use with aquariums and
other water-related products.
10
WARNING – Power Cord Safety
When routing your PG-503’s AC power cord place it away from heavy foot
traffic pathways such as hallways and doorways being sure to never create
a trip hazard.
If your power cord’s internal wiring or shielding becomes exposed by a rip
or tear in the protective jacket immediately disconnect it from the AC and
discontinue use. Consult warranty information for further action.
WARNING – Cleaning
Unplug the PG-503 from the AC wall outlet before cleaning and lightly dust.
Do not use liquid or aerosol cleaners.
WARNING – The PG-503 is not designed for use with any medical
equipment.
Agency Approval UL/c(UL)
Limited 5 years
Warranty Information
UltraLink Products, Inc. (“UltraLink”) warrants to the purchaser that
this UltraPower® product shall be free of defects in design, materials, or
workmanship under normal use in non-commercial use for a period of five
years from date of purchase.
This warranty extends only to the original purchaser and is nontransferable.
During the warranty period, UltraLink will, at no additional charge, repair
and/or replace defective parts or, at the option of UltraLink completely
replace the unit. Following the expiration of the warranty period, UltraLink
will offer out of warranty replacement for non-functioning product with a
new equivalent model for the out of warranty replacement fee of $100 plus
round trip shipping and handling.
This warranty does not cover any UltraPower unit that has been damaged or
rendered defective (a.) as a result of accident, misuse, or abuse; (b.) by the
use of parts not manufactured or sold by or (c.) by modification of product.
The UltraPower Limited 5-Year Warranty is subject to all the conditions
listed below:
Proof of purchase from an authorized dealer/installer: Original purchase
receipts must accompany any product return or claim for damage.
Proper Installation: The UltraPower product must be installed correctly
according to all the instructions, provisions, and cautions contained in this
Owner’s Manual.
Notification: You must notify UltraLink within ten days of any event causing
a claim.
Product Return: You must contact UltraLink customer service and obtain a
Return Merchandise Authorization (RMA) number before returning the unit
to UltraLink.
11
Claims under Limited 5-Year Warranty: At the time you request an RMA,
you must notify UltraLink if you feel that you have a claim. Upon receipt
of the RMA number you may return the unit to UltraLink at the address
given to you by the customer service department. Please note that you are
responsible for any and all charges related to shipping the unit to UltraLink
for evaluation. If damage was indicated on your RMA request, UltraLink
will mail you a claim form to be completed and returned within 30 days.
Determination of Failure: UltraLink Products, Inc. will evaluate the
UltraPower product for surge damage. The unit must show signs of surge
damage or must be performing outside of design specifications in respect
to its surge protection capability. Opening the enclosure, tampering with,
or modifying the unit in any way shall be grounds for an automatic denial
of your request for payment. After evaluating all information provided,
UltraLink shall, in its sole discretion, determine whether or not your claim
meets the requirements for payment under the provisions of this policy.
If the unit shows no signs of AC power or signal line surge damage and is
working within design specifications, UltraLink will return the unit to you
with details of our examination and the test results, notifying you of the
rejection of your claim.
Payment of claims: Should UltraLink determine that the product is
damaged, UltraLink will, at its discretion, pay for the cost of the repair of
the product, or send you a replacement unit.
Other Insurance Coverage and Warranties: This coverage is secondary
to any existing manufacturer’s warranty, implied or expressed, or any
insurance and/or service contract that may cover the loss including your
homeowner’s or renter’s insurance policies.
Exclusions: This Limited 5-Year Warranty does not cover the following:
Service charges, installation costs, reinstallation costs, setup cost,
diagnostic charges; periodic checkups; routine maintenance, loss of use
of the product, costs or expenses arising out of reprogramming or loss of
programming and/or data, shipping charges or fees, service calls, loss or
damage occasioned by fire, theft, flood, wind, accident, abuse or misuse,
and products subject to manufacturer’s recall or similar event.
REGISTRATION
Please register your product at: ultralinkproducts.com. Failure to register
will not diminish your warranty rights.
HOW TO MAKE A CLAIM
In the event damage has occurred to products, you must follow these
instructions:
(1.) Contact UltraLink within ten (10) days after you discover a product defect
(or should have discovered it, if such product defect was obvious)
(2.) Give a detailed explanation of how the damage occurred;
(3.) Obtain a Return Merchandise Authorization number (RMA);
(4.) Upon receipt of a claim form (which may be sent to you after you have
filed your formal warranty claim), fill out the claim form entirely;
(5.) Return the products, shipping Prepaid by you (to be refunded if you
are entitled to a remedy under the scope of this Limited 5-Year Warranty),
to UltraLink for verification of damage, along with a copy of your Original
Sales Receipts and Proof of Purchase (UPC label or packing slip) for such
products, the completed claim form, and printed “Return Authorization
Number” on the outside of the return package (the claim form will include
instructions for return).
TELEPHONE CONTACT NUMBERS:
United States: (909) 947-6960
Canada: (905) 479-2831
As To Each Warranty:
Any technical or other advice offered before or after delivery with respect
to the use and application of the product is furnished without charge and
subject to the understanding that such advice is issued at the purchaser’s
sole risk without any limitation or modifications of any disclaimer or other
provision contained herein.
The above are in lieu of all other warranties, express or implied, including
implied warranty of merchantability and fitness for a particular purpose.
In no event shall UltraLink be liable for special, incidental, consequential
or indirect damages. This warranty may not be modified except in writing,
signed by an officer of UltraLink.
12
13
UltraPower® and the Planet Green™ brands are a division of
UltraLink® Products, Inc. Markham, Ontario, Canada.
UltraPower®, the UltraPower® logo, Planet Green™ and the Planet Green™ logo
are registered trademarks of UltraLink® Products, Inc. Specifications and features
are subject to change without notice. ©2010 UltraLink® Products, Inc.
All rights reserve. Manufactured in China.
www.ultralinkproducts.com
THE ULTIMATE CONNECTION®
PG-805
User Guide
Introduction
Thank you for purchasing the
UltraPower® Planet Green™ PG-805
Energy Saving Surge Protector with
USB Remote On/Off Controller.
The Planet Green product line marks
our commitment to environmentally
conscious engineering.
Save Energy, Save Money
Most electronic devices draw power even in standby mode, an
obvious waste of resources. The PG-805 features a USB Remote
On/Off Controller making it simple and convenient to turn off your
devices automatically when they are not in use.
The PG-805 also reduces noise with high frequency capacitors
and a choke. Additionally, the robust AC power line surge protector
saves your valuable components from surges and voltage spikes.
We’ve used the latest X3™ MOVs (Metal Oxide Varistors) made
with improved materials and technology.
1
Features
Energy Saver Indicator Light
A blue LED indicates the 5 Energy Saving Outlets are on
USB Remote On/Off Controller
5 Energy Saving Outlets On or Off with
the press of a button
Ground Fault Indicator Light
A red LED indicates the power outlets are not properly grounded
Always On Indicator Light
A green LED indicates the 3 Always On Outlets are active
3 Always On Outlets
Provides continuous power for
connected components
et
-fe
25
2 USB
Charging Ports
Provides 5 volts, 1.5 amps
maximum total for both ports
Manual On/Off and
Learning Button
Press the button to power the
Energy Saving Outlets On/Off
or to sync the Remote Controller
with one or more PG-805s
RJ11 & RJ45 Telephone
and Network Protection
2
5 Energy Saving Outlets
USB Remote turns outlets completely
on and off
3
Setup
Connecting your equipment
USB Charging Ports
The PG-805 has 3 “Always On” outlets that
provide continuous power for devices that are
designed to remain on at all times.
Typical Always On device are DVR,
Modems, Routers, Alarm Clocks, etc.
Two USB charging ports provide 5V
and a total of 1.5 amps of power.
Telephone RJ11 Line Protection and
Network RJ45 Cable Protection
Protects against destructive surges riding
the phone line and network cable.
DVR Cable/Sat
DVR Cable/Sat
Modem / Router
TV
Notebook
Modem / Router
TV
Notebook
The 5 “Energy Saver” outlets are control by
the USB remote. Components not requiring
continuous power can be plugged into the
Energy Saver outlets.
See below for a list of devices that can be
switched off when not in use.
Reading the PG-805’s LEDs
Green LED light on – unit is actively
protecting against surge and
voltage spikes
Red LED light on – check for ground
related problems
Blue LED light on – Energy Saving
outlets have power
4
Media Player
A/V Receiver
A/V Components
Gaming
Media Player
A/V Receiver
A/V Components
Gaming
Speakers
Subwoofer
Scanner
Printer
Speakers
Subwoofer
Scanner
Printer
5
Using the USB Remote
The USB Remote can be used in two different ways.
Learning Button
1.It can be used free standing or as a wall
mounted switcher. You can simply turn
the energy saver On/Off with a quick
press of its top button.
The “LEARNING” button has two functions:
1. To synchronize with the USB remote
2.Manual switch for the Energy Saving Outlets
2.Or connect the USB remote to one of the
main components with a USB port such as
a TV, computer or laptop.
When the USB Remote is plugged into the
component’s USB port, it detects power on
the connected port and sends On/Off signal
instructions to the PG-805.
Some USB ports may have continuous power, this is indicated
when the USB remote continues to light up after the equipment is
turned off. This means the USB port will not work with the PG-805
– please use another USB port or trigger device.
The USB Remote works within a
range of up to 25-feet, this may vary
depending on room layout, building
materials and local interference.
et
-fe
25
Remote Controller’s Range
Synchronizing USB Remote with PG-805
The USB Remote and the PG-805 arrives paired and ready to
use. To synchronize the Remote with the PG-805*, position
them near each other and follow the steps below.
The Energy Saver function shuts down about 2.5 minutes after the
main USB component is turned off, allowing enough time to shut
down peripheral components if desired.
6
Operating
1. T
urn on the TV, computer, laptop or any USB component
(trigger device) before synchronizing.
2.Press and hold the “LEARNING” button on the side of
PG-805 for five seconds. The blue “Energy Saver” LED will
start flashing, then release the “LEARNING” button.
3.Press the button on the USB remote or connect the USB
Remote directly to the main component’s USB port within 5
seconds. Once the remote detects power in the component,
it will send a wireless code to the PG-805.
4.Once the PG-805 has successfully learnt the code from
the remote, the blue “Energy Saver” LED will change from
flashing to solid.
* You can synchronize multiple PG-805 with a single Remote.
It is important to note that each PG-805 surge protector must be
plugged directly into an AC wall outlet and not daisy-chained together.
7
Trouble Shooting Guide
Wall-Mount Your Surge Protector
My equipment won’t turn on
1. Locate the mounting holes on the back
of the PG-805 for wall or baseboard
mounting.
1. C
heck if it is plugged into the “Always On” or
“Energy Saving” Outlets.
2. Install screws (not included) on wall or
baseboard surface leaving at least ¼-inch
of the screw exposed.
3. Place and secure the PG-805
onto screws.
2.Switch the “Energy Saving Outlets” on with the
“LEARNING” button.
USB Remote can’t turn on or off my equipment
1. C
heck if it is plugged into the “Always On” or “Energy Saving”
outlets.
2. The USB Remote is out of its effective range.
3. Press the button on the USB Remote, if the red LED light does
not blink, replace the CR1632 3V Lithium battery in the remote.
Specifications
8
4. Re-synchronize the USB Remote with PG-805.
Electrical Rating
15A / 120V, 60Hz, 1800 Watts
Surge Suppression
2160 Joules
Red Ground Fault LED is on
Clamping Voltage
330 V
USB Charger
2 ports (5V, total 1.5 Amps)
The red Ground Fault LED indicates improper home wiring.
Consult a licensed electrician to resolve the issue. UltraLink® is not
responsible for damages caused by improper wiring.
Phone Line/
Network Protection
(RJ11) & (RJ45)
Stand-by power
<0.7W
USB Remote Wireless Range
Up to 25 feet (Open Space)
USB Remote Battery Type
CR1632 3V Lithium battery
USB device does not charge
Exceeding 1.5 amps triggers the overload protection circuit and
disables charging. Unplug your portable device and ensure it does
not exceed a total draw of 1.5 amps.
9
WARNING – Power Sources
Do not plug your PG-805 into a power outlet that differs from that indicated
for safe use. If you don’t know the type of electrical power to your home
please consult the local power company.
WARNING – Grounding and Polarization
Your Planet Green PG-805 is equipped with a three-wire grounded AC
power cord. It’s designed for use with three-terminal grounded outlets only.
If the plug doesn’t fit directly into your outlet do not force it in and contact
an electrician to install a properly polarized outlet. Do not alter the plug or
extension cord in any way to accommodate an ungrounded, two-prong
outlet. Never defeat the grounding by using a 3-to-2 prong adapter and we
advise calling an electrician to install properly grounded outlets.
If you have rooftop antennas, satellite dishes, or any other component with
wiring connected to your PG-805 make sure it is properly grounded. Refer
to grounding techniques found in Section 810 of the National Electrical Code
(NEC), ANSI/NFPA 70 (in Canada, Part 1 of the Canadian Electrical Code).
Using these techniques protect against voltage surges and static electric
charges. Never place any part of an antenna or other such device near
overhead power lines, or any other power circuit. Do not touch power lines
or power circuits which may cause severe physical injury and possibly
death.
WARNING – Storm Precautions
If a lightning storm occurs immediately disconnect incoming signal and
power lines such as cable and telephone. This device protects connected
electronic equipment from AC power surges up to a certain point. The
PG-805 is not rated, however, as a lightning arrestor, so it will not afford
protection from lightning strikes near power lines, the home, electrical
service entrance or antennas.
WARNING – No User Serviceable Parts Inside PG-805
If, for any reason, your PG-805 is not operating properly, do not open any
part of the unit such as the cover and attempt any sort of repair. Unplug the
unit and consult the manual for warranty and service information.
CAUTION – Do Not Expose To Heat
Do not place your PG-805 in direct sunlight or near wall heaters, space
heaters, or any enclosed space that may experience extreme temperature
increases.
WARNING – Avoid Electrical Shocks
Never use your PG-805 if liquid of any kind is spilled on or into it. Do not
use the PG-805 near areas where rain leaks or splashes in, or where water
is regularly used as in bathroom or kitchen. Not for use with aquariums and
other water-related products.
10
WARNING – Power Cord Safety
When routing your PG-805’s AC power cord place it away from heavy foot
traffic pathways such as hallways and doorways being sure to never create
a trip hazard.
If your power cord’s internal wiring or shielding becomes exposed by a rip
or tear in the protective jacket immediately disconnect it from the AC and
discontinue use. Consult warranty information for further action.
WARNING – Cleaning
Unplug the PG-805 from the AC wall outlet before cleaning and lightly dust.
Do not use liquid or aerosol cleaners.
WARNING – The PG-805 is not designed for use with any medical
equipment.
Agency Approval UL/c(UL)
Limited 5 years
Warranty Information
UltraLink Products, Inc. (“UltraLink”) warrants to the purchaser that
this UltraPower® product shall be free of defects in design, materials, or
workmanship under normal use in non-commercial use for a period of five
years from date of purchase.
This warranty extends only to the original purchaser and is nontransferable.
During the warranty period, UltraLink will, at no additional charge, repair
and/or replace defective parts or, at the option of UltraLink completely
replace the unit. Following the expiration of the warranty period, UltraLink
will offer out of warranty replacement for non-functioning product with a
new equivalent model for the out of warranty replacement fee of $100 plus
round trip shipping and handling.
This warranty does not cover any UltraPower unit that has been damaged or
rendered defective (a.) as a result of accident, misuse, or abuse; (b.) by the
use of parts not manufactured or sold by or (c.) by modification of product.
The UltraPower Limited 5-Year Warranty is subject to all the conditions
listed below:
Proof of purchase from an authorized dealer/installer: Original purchase
receipts must accompany any product return or claim for damage.
Proper Installation: The UltraPower product must be installed correctly
according to all the instructions, provisions, and cautions contained in this
Owner’s Manual.
Notification: You must notify UltraLink within ten days of any event causing
a claim.
Product Return: You must contact UltraLink customer service and obtain a
Return Merchandise Authorization (RMA) number before returning the unit
to UltraLink.
11
Claims under Limited 5-Year Warranty: At the time you request an RMA,
you must notify UltraLink if you feel that you have a claim. Upon receipt
of the RMA number you may return the unit to UltraLink at the address
given to you by the customer service department. Please note that you are
responsible for any and all charges related to shipping the unit to UltraLink
for evaluation. If damage was indicated on your RMA request, UltraLink
will mail you a claim form to be completed and returned within 30 days.
Determination of Failure: UltraLink Products, Inc. will evaluate the
UltraPower product for surge damage. The unit must show signs of surge
damage or must be performing outside of design specifications in respect
to its surge protection capability. Opening the enclosure, tampering with,
or modifying the unit in any way shall be grounds for an automatic denial
of your request for payment. After evaluating all information provided,
UltraLink shall, in its sole discretion, determine whether or not your claim
meets the requirements for payment under the provisions of this policy.
If the unit shows no signs of AC power or signal line surge damage and is
working within design specifications, UltraLink will return the unit to you
with details of our examination and the test results, notifying you of the
rejection of your claim.
Payment of claims: Should UltraLink determine that the product is
damaged, UltraLink will, at its discretion, pay for the cost of the repair of
the product, or send you a replacement unit.
Other Insurance Coverage and Warranties: This coverage is secondary
to any existing manufacturer’s warranty, implied or expressed, or any
insurance and/or service contract that may cover the loss including your
homeowner’s or renter’s insurance policies.
Exclusions: This Limited 5-Year Warranty does not cover the following:
Service charges, installation costs, reinstallation costs, setup cost,
diagnostic charges; periodic checkups; routine maintenance, loss of use
of the product, costs or expenses arising out of reprogramming or loss of
programming and/or data, shipping charges or fees, service calls, loss or
damage occasioned by fire, theft, flood, wind, accident, abuse or misuse,
and products subject to manufacturer’s recall or similar event.
REGISTRATION
Please register your product at: ultralinkproducts.com. Failure to register
will not diminish your warranty rights.
HOW TO MAKE A CLAIM
In the event damage has occurred to products, you must follow these
instructions:
(1.) Contact UltraLink within ten (10) days after you discover a product defect
(or should have discovered it, if such product defect was obvious)
(2.) Give a detailed explanation of how the damage occurred;
(3.) Obtain a Return Merchandise Authorization number (RMA);
(4.) Upon receipt of a claim form (which may be sent to you after you have
filed your formal warranty claim), fill out the claim form entirely;
(5.) Return the products, shipping Prepaid by you (to be refunded if you
are entitled to a remedy under the scope of this Limited 5-Year Warranty),
to UltraLink for verification of damage, along with a copy of your Original
Sales Receipts and Proof of Purchase (UPC label or packing slip) for such
products, the completed claim form, and printed “Return Authorization
Number” on the outside of the return package (the claim form will include
instructions for return).
TELEPHONE CONTACT NUMBERS:
United States: (909) 947-6960
Canada: (905) 479-2831
As To Each Warranty:
Any technical or other advice offered before or after delivery with respect
to the use and application of the product is furnished without charge and
subject to the understanding that such advice is issued at the purchaser’s
sole risk without any limitation or modifications of any disclaimer or other
provision contained herein.
The above are in lieu of all other warranties, express or implied, including
implied warranty of merchantability and fitness for a particular purpose.
In no event shall UltraLink be liable for special, incidental, consequential
or indirect damages. This warranty may not be modified except in writing,
signed by an officer of UltraLink.
12
13
UltraPower® and the Planet Green™ brands are a division of
UltraLink® Products, Inc. Markham, Ontario, Canada.
UltraPower®, the UltraPower® logo, Planet Green™ and the Planet Green™ logo
are registered trademarks of UltraLink® Products, Inc. Specifications and features
are subject to change without notice. ©2010 UltraLink® Products, Inc.
All rights reserve. Manufactured in China.
www.ultralinkproducts.com
THE ULTIMATE CONNECTION®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement