Instruction Manual

2400W Cyclonic Bagless Vacuum Cleaner - BVB2400W

CONTENTS

Conecting suction hose to vacuum cleaner

Conecting suction hose to telescopic tube

Connecting

Cord airflow

13

11

11

4

GENERAL SAFETY

IMPORTANT INFORMATION

Read this manual thoroughly before you start using the product.

The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to.

Please follow all instructions and take notice of all warnings.

The cover (or back) of the unit should not be removed to prevent risk of electric shock. This unit must be serviced by a qualified service personnel only.

The lightning flash with symbol within the triangle is intended to warn you of a non-insulated dangerous voltage in the product’s enclosure that could be of sufficient magnitude to generate a risk of electric shock to persons.

The exclamation point within the triangle is intended to warn you to the presence of important operating and maintenance instructions in the documents included with the product.

IMPORTANT INFORMATION

The lightning flash symbol within the triangle is intended to warn you of non-insulated dangerous voltage the product’s enclosure that could be of sufficient magnitude to generate a risk of electric shock to persons.

• Only using furniture that can safely support the Products.

• Ensure the Product is not overhanging the edge of the supporting furniture.

• Do not place the product on a high furniture without securing both the furniture

and the product to a stable support.

• Do not place the product on cloth or other conductive materials.

• Warn children of the dangers of climbing on furniture to reach its controls and

to call for an adult to assist.

GENERAL SAFETY (Cont.)

• Before turning on, make sure your outlet voltage and circuit frequency

correspond to the voltage stated on the appliance rating label. If this is not the

case, do not use the appliance.

• Insert the plug firmly into an appropriate mains socket. Do not alter the plug.

Do not use an extension cord or electrical outlet with inadequate

current-carrying capacity.

• To protect against fire and electric shock, do not immerse the cord, plug or

the appliance itself in water or other liquid. Ensure your hands are dry before

handling the plug or switching on the appliance. Do not use it outdoors or on

wet surfaces.

• Do not kink or damage the power cord. Do not wrap it around the appliance.

Do not pull or carry the vacuum cleaner by the cord. Do not use the cord as a

handle, close a door on the cord or pull the cord around sharp edges or

corners. Do not run the vacuum cleaner over the cord. Run the cord in such a

way that there will be no risk of anyone pulling it inadvertently or tripping over

it. Keep the cord away from heated surfaces.

• This vacuum cleaner is equipped with a plug and a power supply cord that

automatically retracts. If anything is damaged, both the plug and the cord

must be repaired by a qualified repairer or electrician. When unplugging, grab

the plug, do not pull the cord. Then press the cord retraction pedal and hold

the plug, guiding it back onto the cord reel to prevent whipping and causing

injury or damage.

• Always switch off the appliance first and then unplug the cord from the outlet

when you have finished vacuuming, before connecting or changing accessories

and before emptying the dust tank or cleaning the appliance.

• Do not leave the vacuum cleaner unattended when plugged in.

5

6

GENERAL SAFET (Cont.)

ELECTRICAL SAFETY AND POWER CORD HANDLING

• Voltage: Make sure that your outlet voltage and circuit frequency

correspond to the voltage stated on the appliance rating plate.

• Power outlet: Connect the appliance to a properly earthed power outlet,

which must be easily accessible so that you can unplug it if necessary.

• Power cord: Do not kink or damage the power cord. Do not let it hang over

the edge of a table or benchtop, and do not let it touch hot or sharp surfaces.

Make sure the cord does not run under the vacuum cleaner.

• Electrical safety: Do not insert any objects into the appliance.

WARNING!

• To reduce the risk of electrocution and other electrical hazards, do not immerse

the cord or plug in water, do not spill liquids onto the vacuum cleaner, and do

not operate it with wet hands.

• Do not use this appliance if it has a damaged cord or plug, if it is not working

properly, or if it has been damaged or dropped. If damaged, please contact our

support centre line - [email protected]

• If the appliance and/or its cord are damaged, it must be replaced by the

manufacturer, its service agent or a similarly qualified person in order to avoid

a hazard. Do not attempt to repair, disassemble, or modify the appliance.

There are no user-serviceable parts inside this unit.

• Switch the appliance off and unplug it from the power supply after you have

finished using it and before cleaning, servicing, maintenance, or moving the

appliance. DO NOT pull the cord when disconnecting, grip the plug and pull it

gently out of the outlet.

USAGE RESTICTIONS AND CONDITIONS

• This appliance is intended for indoor domestic use only. It is not suitable for

commercial, industrial or laboratory use.

• Do not use the appliance outdoors.

• The appliance is not intended to be operated by means of an external timer.

GENERAL SAFETY (Cont.)

• The appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction on the use

of the appliance by a person responsible for their safety.

• Supervise children to ensure they do not play with the appliance. Do not allow

children to clean the vacuum cleaner or perform user maintenance.

• Maintain the oven in a clean condition to avoid deterioration, which could

affect its working life and result in a hazard risk.

• We accept no liability for any eventual damages due to improper use, incorrect

handling or non compliance with these instructions.

This appliance is intended to be used in household and similar applications such as:

– staff kitchen areas in shops, offices and other working environments;

– farm houses;

– by clients in hotels, motels and other residential type environments;

– bed and breakfast type environments.

If the supply cord is damaged, it must be replace by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

7

8

INSTALLATION

Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation.

UNPACKING

• When unpacking the product, be sure to keep all the packaging materials

until you have made sure your new product is undamaged and in good

working order. This product has been packaging to protect itself

against transportation.

• Be sure to remove all packaging materials around the product and that

the plastic film used is also removed.

• CAUTION: Plastic wrapping can be a suffocation hazard for babies and young

children. Make sure all packaging materials are out of reach for children and

that they are disposed of correctly.

PRODUCT OVERVIEW

9

10

PRODUCT OVERVIEW (Cont.)

HOW TO USE

SETTING UP THE VACUUM CLEANER

WARNING!

Make sure the vacuum cleaner is unplugged from the power outlet before assembling or removing any accessories.

CONNECTING THE SUCTION HOSE TO THE VACUUM CLEANER BODY

• Plug the suction hose into the suction hose connection at the front

of the vacuum cleaner. Push it in firmly until you hear it click into

place (A).

• To remove the suction hose, press the two catches on the side of the

suction hose (B ) and pull out the suction hose.

CONNECTING THE SUCTION HOSE TO THE TELESCOPIC TUBE

• To connect the suction hose to the

telescopic tube, slide the end of the

suction hose with the exhaust air

valve onto the end of the telescopic

tube with the wider diameter (C).

• To remove the suction hose from the

telescopic tube, simply pull off

the suction hose.

11

HOW TO USE (Cont.)

PULLING OUT THE TELESCOPIC TUBE

• Press the slider on the telescopic tube (D) in the direction shown by

the arrow and pull the telescopic tube out to the length you want.

• Let go of the slider and keep pulling out the telescopic tube until it

locks in place.

12

CONNECTING AN ATTACHMENT

• Select a nozzle attachment and plug it onto the end of the telescopic

tube with the narrower diameter.

• To change the nozzle attachment, pull off the nozzle attachment and

plug a new nozzle attachment onto the telescopic tube. The vacuum

cleaner comes with a floor brush, an upholstery nozzle and a crevice

nozzle with fold-out brush. Usage is explained on the following pages.

CORD REWIND

• Holding the power plug firmly, pull it to fully unwind the cord.

• Position the cord so no one is likely to trip over it.

• To rewind the power cord, press the cord retraction button.

Note: Take care, the cord retracts very quickly. Guide it with one hand

to prevent the cord from whipping, which could cause damage or injury.

HOW TO USE (Cont.)

AIRFLOW CONTROL

• To lower the airflow (suction power)

temporarily during vacuuming, push up

the suction control valve on the

curved handle.

• Push it down again to cover the opening

for increased suction (E).

UPHOLSTERY NOZZLE

Used for cleaning sofas, lounge, chairs, car seats, etc.

2-IN-1 CREVICE NOZZLE

Used for cleaning upholstery, the car interior for all little gaps that cannot be reach with other nozzles.

- Flip over the top of nozzle following the arrow

direction marked on nozzle to switch between the

brush attachment.

ACCESSORY HOLDER

Used to connect and hold your accessoring to the telescopic tube of your vacuum cleaner.

13

14

CLEANING AND MAINTENANCE

WARNING!

• Always unplug the vacuum from the power outlet before attempting to

clean any part of the vacuum or removing its contents/accessories.

• For optimum cleaning performance, clean the filters each time you

empty the dust tank.

• Only use the vacuum with the filter intact, in dry conditions.

STEP 1

Hold down the release button indicated on

(F) image. It will detach the dust tank from the vacuum cleaner.

STEP 2

Hold the dust tank over a bin and press the release button to open the bottom flap (G).

CLEANING AND MAINTENANCE (CONT.)

STEP 3

You can remove the in-tank filter unit to clean the product further. First locate arrows on the dust tank (H).

STEP 4

When the intank filter is in place, the upper arrow points towards the lower arrow and the closed lock symbol (I).

STEP 5

To remove the in-tank filter unit, turn the dust lid until the upper arrow points towards the lower lower arrow OPEN lock symbol.

STEP 6

Clean the dust tank and filter with a damp cloth and mild detergent, then wipe all parts dry before putting it all back together.

15

CLEANING AND MAINTENANCE (CONT.)

CLEANING THE HEPA FILTER

As you now have the dust tank removed, you should also consider cleaning the

HEPA filter, which is located underneath the dust tank lid.

STEP 7

Push up the latch on the dust tank lid and flip the lid over to show the HEPA filter (see J. image).

STEP 8

Remove the HEPA Filter

(K) by pulling it out and removing the foam filter underneath (L).

16

STEP 9

Take the filters out over an open dustbin. Then clean the filters using a brush, if necessary or wash the filters in cold or lukewarm water with a mild detergent. Do not machine-wash the filters!

STEP 10

Allow the filters to air-dry completely before putting them into the in-tank filter unit.

Close the dust tank lid. Make sure you hear the fastener clip lock in place.

CLEANING AND MAINTENANCE (CONT.) CLEANING AND MAINTENANCE (CONT.)

STEP 11

Following the same procedure but reverse, once assembling back the dust bin with filters and locking the dust canister and lid together by making sure the uppser arrow is pointing towards the lock logo.

Place the bottom of the dust bin into the vacuum cleaner area it was removed from, then click the Top mechanism into place. See the (M) image as reference.

CLEANING THE MOTOR FILTERS

The motor filters are located inside the vacuum cleaner unit under the dust tank area. (dust tank must be removed to access).

1. Remove the small motor filter

(N, image #1) see right image.

- Clean the filter over a dust bin by tapping on it.

2. Open the Filter Lid

(N. image #2) Remove the filter located inside and hold over a bin and tap the filter to remove he dust.

3. Once cleaned, place the filter back inside and close the Filter Lid (#2).

Insert the dust canister back into the vacuum cleaner as instructed at the top of this page.

17

18

FAQS

WARNING!

Never use the vacuum when the suction power is very weak. When this occurs, switch off the vaccum cleaner and unplug it. Check if the dust canister is full. Then check if any airways is jammed with rubbish or debris, once removed turn vacuum back on to see if operated normally.

If experiencing issues with your oven and isn’t operating correctly please check the following pages for solutions to the problems. If none of the solutions offered help solve the problem with your appliance then please contact our call centre on [email protected].

DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.

PROBLEM

VACUUM IS NOT

WORKING

THE VACUUM CLEANER

WILL NOT PICKUP DIRT

AND HAS LOSS OF

SUCTION

DUST IS ESCAPING THE

VACUUM CLEANER

POSSIBLE SOLUTION

Make sure that it is plugged in securely into the power wall socket.

- Make sure the dust canister is installed correctly.

- The dust tank is full, if so empty its contents.

- The filters are clogged, go through cleaning and

maintenance pages (page 11) to clean out all filters

and dust.

- Make sure the accessories such as the flexible

hose and attachments are installed correct and

are not blocked or cloggest with rubbish that has

been vacuumed.

- The dust tank is full, please empty it.

- The dust tank is not installed correctly. Check to

ensure that the dust tank is clicked into place and

installed correctly.

- The filters are not installed correctly, follow the

cleaning and maintenance steps (page 11) to clean

the filters and remove and debris.

SPECIFICATIONS

Ratings

Dimensions

Weight

220-240V ~ 50/60Hz

2000W Norm. / 2400W Max.

450 (w) x 330 (d) x 800-1000 (h) mm

Net: 6.1 kg / Gross: 7.1 kg

19

CUSTOMER HELPLINE: [email protected]

DISTRIBUTED BY:

Ayonz Pty Ltd