Compaq Compaq Presario,Presario 925 System information

Compaq Compaq Presario,Presario 925 System information
Compaq Presario CQ62 Notebook PC
HP G62 Notebook PC
Maintenance and Service Guide
Document Part Number: 602633-001
January 2010
This guide is a troubleshooting reference used for maintaining and servicing the computer. It provides
comprehensive information on identifying computer features, components, and spare parts; and performing
computer disassembly procedures
© Copyright 2010 Hewlett-Packard Development Company, L.P.
ATI and ATI Mobility Radeon are trademarks of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and
used by Hewlett-Packard Company under license. Intel, Arrandale, and Core are trademarks of Intel corporation in the U.S. and other
countries. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in
the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
First Edition: January 2010
Document Part Number: 602633-001
Revision History
Revision
Publication Date
Description
A
October 2010
■
Chapter 1 — added new descriptions for the following components:
❏ Hard drive
❏ Memory module
❏ Processor
❏ WLAN module
■
Chapter 3 and Chapter 4 —added new spare part numbers and
descriptions for the following components:
❏ Base enclosure
❏ Display assembly
❏ Display back cover
❏ Display bezel
❏ Hard drive
❏ Memory module
❏ Optical drive
❏ Processor
❏ System board
❏ Thermal module Top cover
❏ WLAN module
B
December 2010
■
Chapter 3 and Chapter 4 —added new spare part numbers for the
following components:
❏ Processor
❏ System board
❏ WLAN module
Safety warning notice
Å
WARNING: To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly
on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface,
such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow
the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the
AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of
Information Technology Equipment (IEC 60950).
Contents
1 Product description
2 External component identification
Top components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4
Left-side components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5
Right-side components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–6
Bottom components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–7
Display components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8
Wireless antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–9
Additional hardware components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–10
3 Illustrated parts catalog
Service tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1
Computer major components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2
Display assembly components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–9
Plastics Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–11
Mass storage devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–12
Miscellaneous parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–13
Sequential part number listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–14
4 Removal and replacement procedures
Preliminary replacement requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Tools required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Service considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Grounding guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2
Component replacement procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
Service tag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
Computer feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6
Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7
Hard drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–8
Memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10
Wireless module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–12
Optical drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–14
Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–17
Top cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–20
Power button board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–23
Touchpad button board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–24
Maintenance and Service Guide
iv
Contents
Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bluetooth module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RTC battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fan/heat sink assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RJ-11 connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4–25
4–26
4–33
4–34
4–35
4–36
4–37
4–40
4–41
4–47
4–50
5 Setup Utility
Starting Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the language of Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigating and selecting in Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying system information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restoring default settings in Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exiting Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup Utility menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Configuration menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnostics menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5–1
5–1
5–2
5–2
5–2
5–3
5–3
5–3
5–3
5–4
5–4
6 Specifications
Computer specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39.6-cm (15.6-in) HD display specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hard drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe specifications. . . . . .
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive specifications . . . . . . . . .
System DMA specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System interrupt specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System I/O address specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System memory map specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6–1
6–2
6–3
6–4
6–5
6–5
6–6
6–6
6–8
7 Backup and recovery
Creating recovery discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When to back up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Backup suggestions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using system restore points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Performing a recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recovering from the recovery discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recovering from the dedicated recovery partition (select models only) . . . . . . . . . . . . . . . . . . . . . . .
8–1
8–2
8–2
8–3
8–4
8–4
8–4
8 Connector pin assignments
Audio-in (microphone). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio-out (headphone) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
External monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v
9–1
9–1
9–2
9–3
Maintenance and Service Guide
Contents
RJ-11 (modem). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–4
RJ-45 (network) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–4
Universal Serial Bus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–5
9 Power cord set requirements
Requirements for all countries and regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–1
Requirements for specific countries and regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–2
10 Recycling
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–1
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–1
Maintenance and Service Guide
vi
Contents
vii
Maintenance and Service Guide
1
Product description


Category
Description
Product name
Compaq Presario CQ62 Notebook PC
Presario
CQ62 Intel
UMA
Presario
CQ62 Intel
Discrete
X
X
HP G62 Notebook PC
Processors
HP G62
UMA
HP G62
Discrete
X
X
Intel® Core™ i7-620M Processor (4M cache,
2.66 GHz, SC turbo up to 3.33 GHz)
X
X
X
X
Intel Core i5-540M Processor (3M cache, 2.53
GHz, SC turbo up to 3.06 GHz)
X
X
X
X
Intel Core i5-520M Processor (3M cache, 2.4
GHz, SC turbo up to 2.93 GHz)
X
X
X
X
Intel Core i5-430M Processor (3M cache, 2.26
GHz, SC turbo up to 2.53 GHz)
X
X
X
X
Intel Core i3-350M Processor (3M cache, 2.26
GHz)
X
X
X
X
Intel Core i3-330M Processor (3M cache, 2.13
GHz)
X
X
X
X
Intel Core i7-620M Processor (4M cache, 2.66
GHz, SC turbo up to 3.33 GHz)
X
X
X
X
Intel Core i5-540M Processor (3M cache, 2.53
GHz, SC turbo up to 3.06 GHz)
X
X
X
X
Intel Core i5-520M Processor (3M cache, 2.4
GHz, SC turbo up to 2.93 GHz)
X
X
X
X
Intel Core i5-430M Processor (3M cache, 2.26
GHz, SC turbo up to 2.53 GHz)
X
X
X
X
Intel Core i3-350M Processor (3M cache, 2.26
GHz)
X
X
X
X
Intel Core i3-330M Processor (3M cache, 2.1
GHz)
X
X
X
X
Intel Penryn T4300 Processor (3M cache, 2.1
GHz)
X
X
X
X
Intel Penryn T3100 Processor (3M cache, 1.9
GHz)
X
X
X
X
Intel Penryn T4400 Processor (3M cache, 2.2
GHz)
X
X
X
X
Intel Penryn T3300 Processor (3M cache, 2.0
GHz)
X
X
X
X
Pentium Arrandale P6000 Processor (3M
cache, 1.86 GHz)
X
X
X
X
Continued
Maintenance and Service Guide
1–1
Product description


Category
Presario
CQ62 Intel
UMA
Presario
CQ62 Intel
Discrete
HP G62
UMA
HP G62
Discrete
Pentium Arrandale P6100 Processor (3M
cache, 2.0 GHz)
X
X
X
X
Intel Penryn T4500 Processor (3M cache, 2.3
GHz)
X
X
X
X
Intel Core i5-450M Processor (3M cache, 2.4
GHz, SC turbo up to 2.53 GHz)
X
X
X
X
Intel Core i3-370M Processor (3M cache, 2.4
GHz, SC turbo up to 2.53 GHz)
X
X
X
X
Intel Core i5-560M Processor (3M cache,
2.66-3.2 GHz, SCturbor up to 2.53 GHz)
X
X
X
X
Intel Core i5-460M Processor (3M cache, 2.53
GHz, SC turbor up to 2.53 GHz)
X
X
X
X
Intel Core i3-380M Processor (3M cache, 2.53
GHz, SC turbo up to 2.53 GHz)
X
X
X
X
Intel Pentium P6200 Processor (3M cache, 2.13
GHz)
X
X
X
X
Intel Core i5-580M Processor (3M cache,
2.66-3.33 GHz, SC turbor up to 2.53 GHz)
X
X
X
X
Intel Penryn T3500 Processor (3M cache, 2.1
GHz)
X
X
X
X
Intel Celeron 900 Processor (3M cache, 2.2
GHz)
X
X
X
X
Intel Pentium P6300 Processor (3M cache, 2.26
GHz)
X
X
X
X
Intel Processor i3-390M (2.66 GHz)
X
X
X
X
Intel i5-480M Processor (2.3 GHZ)
X
X
X
X
Intel Celeron 925 Processor (2.3 GHz)
X
X
X
X
Intel Core i3-330M Processor (3M cache, 2.13
GHz)
X
X
X
X
Chipset
Intel HM55
X
X
X
X
Graphics
IATI Mobility Radeon™ HD5430 with 512 MB
dedicated video memory
Description
Intel HD Graphics (UMA, integrated) with
shared video memory
X
X
X
X
■ Up to 251 MB of graphics subsystem
memory when total system RAM equals or is
greater than 1024 MB
■ Up to 358 MB of graphics subsystem
memory when total system RAM equals or is
greater than 2048 MB
Continued
1–2
Maintenance and Service Guide
Product description


Category
Description
Presario
CQ62 Intel
UMA
Presario
CQ62 Intel
Discrete
HP G62
UMA
X
Switchable Discrete Graphics
HP G62
Discrete
X
■ ATi Robson XT (ATI Mobility Radeon™
HD6370) with 512MB of dedicated memory
(64Mx16 DDR3 800 MHz x 4 PCs)
■ ATi Robson XT (ATI Mobility Radeon™
HD6370) with 1GB of dedicated memory
(128Mx16 DDR3 800 MHz x 4 PCs)
Panel
39.6-cm (15.6-in) HD LED BrightView display
panel (1366 × 768)
X
X
X
X
16:9 Wide Aspect Ratio
X
X
X
X
2 customer-accessible/upgradable SODIMM
slots
X
X
X
X
Supports dual-channel memory
DDR3, 1066 MHz
X
X
X
X
Supports up to 8 GB of system memory
X
X
X
X
■ 4096 MB total system memory (2048 × 2)
X
X
X
X
■ 3072 MB total system memory (2048 × 1 +
1024 × 1)
X
X
X
X
■ 2048 MB total system memory (2048 × 1,
1024 × 2)
X
X
X
X
■ 1024 MB total system memory (1024 × 1)
X
X
X
X
Supports all 9.5-mm, 6.35-cm (2.50-in) SATA
hard drives
X
X
X
X
Customer accessible
X
X
X
X
750 GB, 5400 rpm
X
X
X
X
640 GB, 5400 rpm
X
X
X
X
500 GB, 7200 rpm
X
X
X
X
320 GB, 7200 rpm
X
X
X
X
250 GB, 7200 rpm
X
X
X
X
160 GB, 7200 rpm
X
X
X
X
12.7 mm fixed SATA tray load
X
X
X
X
DVD±RW and CD-RW SuperMulti Double-Layer
Combo Drive with LightScribe
X
X
X
X
Blu-ray ROM with LightScribe DVD±R/RW
SuperMulti Double-Layer Drive
X
X
X
X
Webcam
(select models only)
VGA camera, fixed angle with activity light and
single analog microphone
X
X
X
X
Microphone
Integrated single analog microphone (for
models with no webcam)
X
X
X
X
Memory
Supports the following configurations:
Hard drives
Single hard drive configurations:
Optical drives
Continued
Maintenance and Service Guide
1–3
Product description


Category
Description
Presario
CQ62 Intel
UMA
Presario
CQ62 Intel
Discrete
HP G62
UMA
HP G62
Discrete
Audio
High-definition audio supports Microsoft®
premium requirements with Presario/HP Altec
Lansing speakers
X
X
X
X
Modem
(select models only)
56K V.92 data/fax MDC modem
(computer models not equipped with a modem
have a cover over the RJ-11 jack opening)
X
X
X
X
Supports all worldwide certification
requirements
X
X
X
X
Integrated 10/100 network interface card (NIC)
X
X
X
X
Realtek 8102E
X
X
X
X
2 wireless antennas built into display assembly
X
X
X
X
Support for no-WLAN option
X
X
X
X
X
X
Ethernet
Wireless
Integrated wireless local area network
(WLAN) by way of wireless module:
Support for the following WLAN formats:
■ Atheros 54g 802.11 b/g
X
X
X
X
■ Atheros 54g 802.11 b/g with Bluetooth
X
X
X
X
■ Broadcom 54g 802.11 b/g
X
X
X
X
■ Broadcom 54g 802.11 b/g with Bluetooth
X
X
X
X
■ Intel Wi-Fi 5100
X
X
X
X
■ Intel Wi-Fi 5100 with Bluetooth
X
X
X
X
External media
cards
(select models only)
Digital Media Slot supporting SD, MMC, MS,
MSPro, xD cards. Supports mini versions of SD,
MMC, MS Duo with adapter, not included
X
X
X
X
Ports
Audio-in (stereo microphone)
X
X
X
X
Audio-out (stereo headphone)
X
X
X
X
High-Definition Multimedia Interface (HDMI)
version 1.3 supporting 1080p with
High-bandwidth Digital Content Protection
(HDCP) key (select models only)
X
X
X
X
Hot plut/unplug with auto-detect
X
X
X
X
RJ-11 (modem, select models only)
X
X
X
X
RJ-45 (Ethernet)
X
X
X
X
USB (3; one is an eSATA/USB port)
X
X
X
X
VGA (Dsub 15-pin) supporting 
1600 × 1200 external resolution at 75 Hz
X
X
X
X
Multi-pin AC power
X
X
X
X
Full-size keyboard, 39.62-cm (15.6-in) with
numeric keypad
X
X
X
X
Supports 2-way scroll with legend
X
X
X
X
Taps enabled as default
X
X
X
X
Keyboard and
TouchPad
Continued
1–4
Maintenance and Service Guide
Product description


Category
Description
Power
requirements
65-W AC adapter with localized cable plug
support
Presario
CQ62 Intel
UMA
Presario
CQ62 Intel
Discrete
X
90-W AC adapter with localized cable plug
support
HP G62
UMA
HP G62
Discrete
X
X
X
6-cell, 2.20 Ah, 47 Wh battery
X
X
X
X
Security
Kensington Security Lock
X
X
X
X
Operating system
Preinstalled:
Windows 7® Professional 32 and 64-bit
X
X
X
X
Windows 7 Home Premium 32 and 
64-bit
X
X
X
X
Windows 7 Home Basic 32 and 
64-bit
X
X
FreeDOS
X
X
AC adapter
X
X
X
Battery (system)
X
X
X
Hard drive
X
X
X
X
Memory module
X
X
X
X
Optical drive
X
X
X
X
Mini Card components
X
X
X
X
Serviceability
Maintenance and Service Guide
End-user replaceable parts:
1–5
Product description
1–6
Maintenance and Service Guide
2
External component identification
Top components
TouchPad
Item
Component
Function
1
TouchPad light
Off—Touchpad is on.
Amber—Touchpad is off.
2
TouchPad*
Moves the pointer and selects or activates items on the screen.
3
Left TouchPad button*
Press the left side of the TouchPad button to execute functions
like the left button on an external mouse.
4
Right TouchPad button*
Press the right side of the TouchPad button to execute functions
like the left button on an external mouse.
*This table describes factory settings.
To view or change the pointing device preferences:
1. Select Start > Devices and Printers.
2. Right-click the device representing the computer.
3. Select Mouse settings.
Maintenance and Service Guide
2–1
External component identification
Lights
✎ Your computer might look slightly different from the illustration in this section.
2–2
Item
Component
Description
1
Touchpad light
Off—TouchPad is enabled.
Amber—TouchPad is disabled.
2
Caps lock light
On—Caps lock is on.
3
Power light
On—The computer is on.
Flashing—The computer is in Sleep.
Off—The computer is off or in Hibernation.
4
Wireless on/off light
White—An integrated wireless device, such as a wireless local
area network (WLAN) device and/or a Bluetooth device, is on.
Amber—No wireless devices are detected.
Maintenance and Service Guide
External component identification
Buttons
Item
Component
Description
1
Speakers grill
Two integrated speakers produce sound.
2
Power button*
■ When the computer is off, press the button to turn on the
computer.
■ When the computer is on, press the button to initiate Sleep.
■ When the computer is in Sleep, press the button to exit Sleep.
■ When the computer is in Hibernation, press the button to exit
Hibernation.
If the computer has stopped responding and Windows shutdown
procedures are ineffective, press and hold the power button for at
least 5 seconds to turn off the computer.
To learn more about your power settings, select Start > Control
Panel > System and Security > Power Options.
*This table describes factory settings. For information about changing factory settings, see the user guides located in Help and
Support.
Maintenance and Service Guide
2–3
External component identification
Keys
✎ Your computer might look slightly different from the illustration in this section.
2–4
Item
Component
Description
1
esc key
Displays system information when pressed at the same time as
the fn key.
2
Send e-mail key
Opens a new e-mail in your default e-mail client.
3
Media application key
Launches CyberLink PowerDVD.
4
Web browser key
Launches default web browser.
5
Print key
Sends the currently-active document to the default printer.
6
Calculator key
Launches the calculator application.
7
fn key
Displays system information when pressed in conjunction with the
esc key.
8
Windows logo key
Displays the Windows Start menu.
9
Windows applications key
Displays a shortcut menu for items where the cursor is positioned.
10
Actions keys
Executes frequently-used system actions.
Maintenance and Service Guide
External component identification
Left-side components
✎ Your computer might look slightly different from the illustration in this section.
Item
Component
Function
1
External monitor port
Connects an external VGA monitor or projector.
2
Vent
Enables airflow to cool internal components.
computer fan starts up automatically to cool internal
✎ The
components and prevent overheating. It is normal for the
internal fan to cycle on and off during routine operation.
3
HDMI port (select models only)
Connects an optional video or audio device, such as a high-definition
television, or any compatible digital or audio component.
on your computer model, the computer might include
✎ Depending
an HDMI port or a USB port at this location.
4
RJ-45 (network) jack
Connects a network cable.
5
USB ports (2)
Connects an optional USB device.
6
Audio-in (microphone) jack
Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.
7
Audio-out (headphone) jack
Produces sound when connected to optional powered stereo
speakers, headphones, earbuds, a headset, or television audio.
8
Digital media slot (select models only)
Support the following optional digital card formats:
■ Memort Stick (MS)
■ Memory Stick Pro (MSP)
■ MultiMediaCard (MMC)
■ Secure Digital (SD) Memory Card
■ xD-Picture Card (XD)
9
Drive light
On—The hard drive is in use.
Maintenance and Service Guide
2–5
External component identification
Right-side components
✎ Your computer might look slightly different from the illustration in this section.
Item
Component
Function
1
Optical drive light
Flashing—The optical drive is being accessed.
2
USB port
Connects to an optional USB device.
3
RJ-11 (modem) jack (select models only)
Connects a modem cable.
4
AC adapter light
Flashing white—The computer is in Sleep.
On white—The computer is connected to external power.
Flashing amber—The computer is charged.
Off—The computer is not connected to external power.
5
Power connector
Connects an AC adapter
6
Security cable slot
Attaches an optional security cable to the computer.
security cable is designed to act as a deterrent, but it might
✎ The
not prevent the computer from being mishandled or stolen.
2–6
Maintenance and Service Guide
External component identification
Bottom components
Item
Component
Function
1
Battery bay
Holds the battery.
2
Vents (4)
Enable airflow to cool internal components.
computer fan starts up automatically to cool internal
✎ The
components and prevent overheating. It is normal for the
internal fan to cycle on and off during routine operation.
3
Battery release latch
Releases the battery from the battery bay.
4
Memory module compartment
Contains two memory module slots.
Holds a wireless LAN module.
Ä
5
Hard drive bay
Maintenance and Service Guide
To prevent an unresponsive system, replace the wireless
module with only a wireless module authorized for use in
the computer by the governmental agency that regulates
wireless devices in your country or region. If you replace
the module and then receive a warning message, remove
the module to restore computer functionality, and then
contact technical support through Help and Support.
Holds the hard drive.
2–7
External component identification
Display components
2–8
Item
Component
Description
1
Internal microphone
Records sound
2
Webcam (select models only)
Records audio and video and captures still photographs
3
Webcam light (select models only)
On—The webcam is in use.
Maintenance and Service Guide
External component identification
Wireless antennas
The computer model has at least 2 antennas that send and receive signals from 1 or more wireless devices. These
antennas are not visible from the outside of the computer.
✎ For optimal transmission, keep the areas immediately around the antennas free from obstructions.
To see wireless regulatory notices, see the section of the Regulatory, Safety and Environmental Notices that applies
to your country or region. These notices are located in Help and Support.
Maintenance and Service Guide
2–9
External component identification
Additional hardware components
Item
Component
Description
1
Power cord*
Connects an AC adapter to an AC outlet.
2
AC adapter
Converts AC power to DC power.
3
Battery*
Powers the computer when the computer is not connected to
external power.
*Batteries and power cords vary in appearance by region and country.
2–10
Maintenance and Service Guide
3
Illustrated parts catalog
Service tag
When ordering parts or requesting information, provide the computer serial number and model number located on
the service tag.
Component
Description
1
Product name
The name affixed to the front of the computer.
2
Serial number (s/n)
An alphanumeric identifier that is unique to each product.
3
Part number/Product number
(p/n)
This number provides specific information about the product’s hardware
components. The part number helps a service technician to determine what
components and parts are needed.
4
Warranty period
The duration of the warranty period for the computer.
5
Model description
An alphanumeric identifier used to locate documents, drivers, and support for the
computer.
Maintenance and Service Guide
3–1
Illustrated parts catalog
Computer major components
3–2
Maintenance and Service Guide
Illustrated parts catalog
Item
Description
1
39.6-cm (15.6-in) High Definition (HD), light-emitting diode (LED) display assembly for
use in:
Spare part number
HP G62 biscotti computer models
595185-001
HP G62 biscotti computer models with webcam
595186-001
Presario CQ62 biscotti computer models
602170-001
Presario CQ62 biscotti computer models with webcam
602171-001
Presario CQ62 matte black computer models
595187-001
Presario CQ62 matte black computer models with webcam
595188-001
HP G62 silver computer models (for model 1.1 only)
605141-001
HP G62 silver computer models with webcam (for model 1.1 only)
605142-001
HP G62 matte black computer models (for model 1.1 only)
608109-001
HP G62 matte black computer models with webcam (for model 1.1 only)
608110-001
HP G62 charcoal computer models (for models 1.2 and 1.3 only)
615583-001
HP G62 charcoal computer models with webcam (for models 1.2 and 1.3 only)
615584-001
HP biscotti computer model (for models 1.1 only)
616452-001
HP G62 imperial blue computer models (for models 1.2 and 1.3 only)
622562-001
HP G62 imperial blue computer models with webcam (for models 1.2 and 1.3 only)
622563-001
2
Power button board
3
Keyboard (includes keyboard cable) for use in:
595204-001
Adriatics
595199-BA1
Belgium
595199-A41
Brazil (for model 1.1 only)
595199-201
Canada
595199-121
Czech Republic
595199-221
France
595199-051
Germany
595199-041
Greece
595199-DJ1
Hungry
595199-211
for International use
595199-B31
Israel
595199-BB1
Italy
595199-061
Japan
595199-291
Korea
595199-AD1
Latin America (for model 1.1 only)
595199-161
North America
595199-001
Norway
595199-DH1
Portugal
595199-131
Russia
595199-251
Continued
Maintenance and Service Guide
3–3
Illustrated parts catalog
Item
Description
Saudi Arabia
595199-171
Spain
595199-071
Switzerland
595199-BG1
Taiwan
595199-AB1
Thailand
595199-281
Turkey
595199-141
United Kingdom
595199-031
4
Speaker assembly (includes cable)
5
Top cover (includes TouchPad board) for use in:
6
Spare part number
602744-001
Biscotti computer models
595206-001
Matte black computer models (for models 1.0 and 1.1 only)
595207-001
Charcoal computer models (for models 1.2 and 1.3 only)
615590-001
Silver computer models (for model 1.1 only)
605147-001
Imperial blue computer models (for models 1.2 and 1.3 only)
622567-001
Fan/heat sink assembly (includes replacement thermal material) for use with:
UMA systems
595832-001
Discrete systems
595833-001
GL40 UMA systems (for models 1.1 and 1.2 only)
606573-001
Thermal module HD545V discrete (for model 1.1 only)
617024-001
Thermal module for discrete systems (for model 1.3 only)
634650-001
Thermal module for UMA (for model 1.3 only)
634651-001
Thermal pad kit for South Bridge chipset
634433-001
7
Touchpad button board
595203-001
8
Modem module (select models only)
All countries and regions except for Australia and New Zealand (for models 1.0 and 1.1
only)
510100-001
Australia and New Zealand (for models 1.0 and 1.1 only)
510100-011
9
RTC battery
10
System board
602745-001
HM55 Discrete system board (for models 1.0 and 1.1 only)
595181-001
HM55 UMA system board
595182-001
HM55 HDMI Discrete system board (for models 1.0 and 1.1 only)
595183-001
HM55 HDMI UMA system board
595184-001
HM55 HD545V discrete system board (for model 1.1 only)
615577-001
HM55 HD545V discrete system board with HDMI card reader (for model 1.1 only)
615578-001
GL40 UMA system board (for models 1.1 and 1.2 only)
605139-001
GL40 UMA system board with HDMI card reader (for models 1.1 and 1.2 only)
605140-001
HD5470/512 MB discrete system board (for model 1.2 only)
615579-001
Continued
3–4
Maintenance and Service Guide
Illustrated parts catalog
Item
11
12
13
Description
Spare part number
HD5470/512 MB discrete system board with HDMI card reader (for model 1.2 only)
615580-001
HD5470/1 G discrete system board (for model 1.2 only)
615581-001
HD5470/1 G discrete system board with HDMI card reader (for model 1.2 only)
615582-001
GL40 DDR2 UMA system board (for model 1.1 only)
616448-001
GL40 DDR2 UMA system board with HDMI card reader (for model 1.1 only)
616449-001
HM55 WiMax UMA system board with HDMI card reader (for model 1.3 only)
628482-001
HD6370/512 MB discrete system board (for model 1.3 only)
631593-001
HD6370/1 GB discrete system board (for model 1.3 only)
631594-001
HD6370/512 MB discrete system board with HDMI card reader (for model 1.3 only)
631595-001
HD6370/1 GB discrete system board with HDMI card reader (for model 1.3 only)
631596-001
i3-350M UMA system board (for model 1.3 only)
634648-001
HD6370/512 MB i3-350M discrete system board (for model 1.3 only)
634649-001
i3-370M UMA system board (for model 1.3 only)
637583-001
HD6370/512 MB i3-370M (for model 1.3 only)
637584-001
Memory module (1066 MHz, DDR3)
1 GB (1066 MHz, DDR3)
598859-001
2 GB (1066 MHz, DDR3)
598856-001
4 GB (1066 MHz, DDR3) (for models 1.2 and 1.3 only)
599092-001
1 GB (6400 MHz, DDR2) (for model 1.1 only)
619545-001
2 GB (6400 MHz, DDR2) (for model 1.1 only)
619546-001
Hard drive (includes hard drive bracket and screws)
750 GB, 5400 rpm (for models 1.2 and 1.3 only)
603787-001
640 GB, 5400 rpm (for models 1.1, 1.2 and 1.3 only)
603785-001
500 GB, 7200 rpm
634919-001
320 GB, 7200 rpm
599055-001
250 GB, 7200 rpm
599054-001
160 GB, 7200 rpm (for models 1.0, 1.1 and 1.2 only)
599053-001
Hard Drive Hardware Kit (not illustrated, includes bracket and screws)
599057-001
Processor (includes replacement thermal material)
Intel Core i7-620M Processor (4M cache, 2.66 GHz, SC turbo up to 3.33 GHz) (for model
1.0 only)
587259-001
Intel Core i5-540M Processor (3M cache, 2.53 GHz, SC turbo up to 3.06 GHz) (for models
1.0, 1.1 and 1.2 only)
594188-001
Intel Core i5-520M Processor (3M cache, 2.4 GHz, SC turbo up to 2.93 GHz) (for models
1.0, 1.1 and 1.2 only)
594187-001
Intel Core i5-430M Processor (3M cache, 2.26 GHz, SC turbo up to 2.53 GHz) (for models
1.0, 1.1 and 1.2 only)
597624-001
Intel Core i3-350M Processor (3M cache, 2.26 GHz) (for models 1.0, 1.1 and 1.2 only)
597623-001
Intel Core i3-330M Processor (3M cache, 2.13 GHz) (for model 1.0 only)
597622-001
Continued
Maintenance and Service Guide
3–5
Illustrated parts catalog
Item
Description
Spare part number
Intel Penryn T4300 Processor (3M cache, 2.1 GHz) (for model 1.1 only)
572929-001
Intel Penryn T3100 Processor (3M cache, 1.9 GHz) (for model 1.1 only)
572925-001
Intel Penryn T4400 Processor (3M cache, 2.2 GHz) (for models 1.1 and 1.2 only)
584296-001
Intel Penryn T3300 Processor (3M cache, 2.0 GHz) (for models 1.1 and 1.2 only)
592399-001
Pentium Arrandale P6000 Processor (3M cache, 1.86 GHz) (for models 1.1 and 1.2 only)
613586-001
Pentium Arrandale P6100 Processor (3M cache, 2.0 GHz) (for models 1.2 and 1.3 only)
613587-001
Intel Penryn T4500 Processor (3M cache, 2.3 GHz) (for model 1.1 only)
591880-001
Intel Core i5-450M Processor (3M cache, 2.4 GHz, SC turbo up to 2.53 GHz) (for models
1.1, 1.2 and 1.3 only)
613585-001
Intel Core i3-370M Processor (3M cache, 2.4 GHz, SC turbo up to 2.53 GHz) (for models
1.1, 1.2 and 1.3 only)
613584-001
Intel Core i5-560M Processor (3M cache, 2.66-3.2 GHz, SC turbo up to 2.53 GHz) (for
models 1.2 and 1.3 only)
625824-001
Intel Core i5-460M Processor (3M cache, 2.53 GHz, SC turbo up to 2.53 GHz) (for models
1.2 and 1.3 only)
626039-001
Intel Core i3-380M Processor (3M cache, 2.53 GHz, SC turbo up to 2.53 GHz) (for models
1.2 and 1.3 only)
625823-001
Intel Pentium P6200 Processor (3M cache, 2.13 GHz) (for models 1.2 and 1.3 only)
625831-001
Intel Core i5-580M Processor (3M cache, 2.66-3.33 GHz, SC turbo up to 2.53 GHz) (for
model 1.2 and 1.3 only)
625825-001
Intel Penryn T3500 Processor (3M cache, 2.1 GHz) (for model 1.2 only)
625830-001
Intel Celeron 900 Processor (3M cache, 2.2 GHz) (for models 1.1 and 1.2 only)
534419-001
Intel Pentium P6300 Processor (3M cache 2.26 GHz) (for model 1.3 only)
635500-001
Intel Processor I3-390M 2.66GHz (for model 1.3 only)
634692-001
Intel 15-480MProcessor 2.3GHz (for model 1.3 only)
634693-001
Intel Celeron 925 Processor 2.3GHz (for model 1.3 only)
636636-001
Thermal pad kit for processor
14
634428-001
Wireless (WLAN) module
Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter for use in Canada, the Cayman Islands,
Guam, Puerto Rico, the United States, and the US Virgin Islands
580101-001
Continued
3–6
Maintenance and Service Guide
Illustrated parts catalog
Item
Description
Spare part number
Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentian, Armenia, Australia, Austria,
AzerbaijanBahamas, Bahrain, Barbados, Belgium, Belize, Benin, Bhutan, Bosnia and
Herzegovina, Botswana, Brazil, Brunei, Bulgeria, Burkina Faso, Burundi, Cambodia,
Cameroon, Cape Verde, Central African Republic, Chad, Chile, China, Colombia, Comoros,
Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Zaire, Denmark, Djibouti, Dominica,
Dominican Republic, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia,
Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar,
Greece, Grenada, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ireland, Italy, Ivory Coast, Jamaica, Japan, Jordan,
Kazakhstan, Kenya, Kiribati, Korea-South, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon,
Lesotho, Liberia, Martinique, Nether Antilles, French Guiana, Aruba, British Virgin Islands,
Bermuda, Syria, Guadeloupe, Liechtenstein, Lithuania, Luxembourg, Macedonia,
Madagaascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania,
Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway,
Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal,
Republic of Moldova, Romania, rwanda, Samoa, San Marino, Sao tome and Principe, Saudi
Arabia, Senegal, Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia,
Slovenia, Solomon Islands, Somalia, South Africa, Spain, Sri Lanka, St. Kitts and Nevis, St.
Lucia, St. Vincent and Gren, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan,
Tanzania, Thailand, Timor (East), Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, United Arab Emirates ,United Kingdom, Uruguay,
Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, and Zimbabwe
580101-002
Intel WiFi Link 5100 802.11/b/g/n WLAN module for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin,
Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin
Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Canada, Cape Verde, the
Cayman Islands, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo,
Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the
Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea,
Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guam, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland,
Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan,
Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia,
Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique,
Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco,
Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand,
Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay,
the People's Republic of China, Peru, the Philippines, Poland, Portugal, Puerto Rico, the
Republic of Moldova, Romania, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore,
Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri
Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland,
Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago,
Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the United Arab Emirates, the United
Kingdom, Uruguay, the U.S. Virgin Islands, the United States, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
593530-001
Intel WiFi Link 5100 802.11/b/g WLAN module for use in Pakistan, Russia, and Ukraine (for
model 1.0 only)
593531-001
Broadcom 4312G 802.11 b/g WiFi adapter for use in Canada, the Cayman Islands, Guam,
Puerto Rico, the U.S. Virgin Islands, and the United States (for models 1.0 and 1.1 only)
582562-001
Continued
Maintenance and Service Guide
3–7
Illustrated parts catalog
Item
15
Description
Spare part number
Broadcom 4312G 802.11 b/g WiFi adapter for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the
Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda,
Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands,
Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African
Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the
Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor,
Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland,
France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece,
Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong
Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan,
Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the
Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru,
Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's
Republic of China, Peru, the Philippines, Poland, Portugal, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia,
Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia,
Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St.
Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden,
Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
(for models 1.0 and 1.1 only)
582562-002
Realtek RTL8191SE 802.11b/g/n 1x1 WiFi Adapter (for models 1.0, 1.1 and 1.2 only)
593533-001
Ralink RT3090BC4 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter
(BT3.0+HS ready) (for models 1.2 and 1.3 only)
602992-001
Intel Centrino Advanced -N + WiMAX 6250 (for model 1.3 only)
619997-001
Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo adapter
(BT3.0+HS ready) (for models 1.2 and 1.3 only)
600370-001
WLAN 1x1 HMC (for model 1.3 only)
630703-001
Optical drive (includes optical drive bezel and bracket)
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with:
Biscotti computer models
599062-001
Matte black computer models (for models 1.1, 1.2 and 1.3 only)
600651-001
Silver computer models (for model 1.1 only)
608112-001
Charcoal computer models (for models 1.2 and 1.3 only)
615588-001
Imperial blue computer models (for models 1.2 and 1.3 only)
622565-001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with:
16
Biscotti computer models
599063-001
Matte black computer models (for models 1.1, 1.2 and 1.3 only)
600652-001
Silver computer models (for model 1.1 only)
608114-001
Charcoal computer models (for models 1.2 and 1.3 only)
615589-001
Imperial blue computer models (for models 1.2 and 1.3 only)
622566-001
Battery
6-cell Li-lon, 2.20 Ah, 47 Wh
593553-001
Continued
3–8
Maintenance and Service Guide
Illustrated parts catalog
Item
Description
Spare part number
6-cell Li-lon, 2.55 Ah, 55 Wh
593554-001
17
Power connector (includes cable)
602743-001
18
USB board
595205-001
19
RJ-11 connector included in Cable Kit (see “Cable Kit” on page 14 for spare part
component information)
595201-001
20
Bluetooth® module (for models 1.0 and 1.1 only)
537921-001
Bluetooth cable (for models 1.0 and 1.1 only)
602538-001
21
Base enclosure
With HDMI card reader for biscotti computer models
617019-001
Without card reader for biscotti computer models
617020-001
With HDMI card reader for matte black computer models (for models 1.1 and 1.2 only)
617021-001
Without card reader for matte black computer models (for models 1.0, 1.1 and 1.2 only)
617022-001
With HDMI card reader for silver computer models (for model 1.1 only)
617023-001
With HDMI card reader for charcoal computer models (for models 1.2 and 1.3 only)
615591-001
With HDMI card reader for imperial blue computer models (for models 1.2 and 1.3 only)
622568-001
Rubber Kit (not illustrated, includes four rubber feet)
600849-001
Plastics Kit (see “Plastics Kit” on page 12 for spare part component information)
595200-001
22
Hard drive cover
23
Memory module cover
Maintenance and Service Guide
3–9
Illustrated parts catalog
Display assembly components
3–10
Maintenance and Service Guide
Illustrated parts catalog
Item
Description
1
Display bezel
Spare part number
Presario CQ62 with webcam and microphone modules
595190-001
Presario CQ62 with microphone module only
595189-001
HP G62 with webcam and microphone modules
595193-001
HP G62 with microphone module only
595192-001
HP G62 CCFL with webcam and microphone modules (for model 1.1 only)
616460-001
2
Display hinges
595195-001
3
High Definition display panel (includes display panel and backlight cables)
595130-001
High definition CCFL display panel (includes display panel and backlight cables) (for model
1.1 only)
616450-001
Webcam board
600166-001
LCD cable kit
595196-001
4
5
Wireless antenna (includes wireless antenna transceivers and cable)
Webcam cable
LCD cable
6
7
Display enclosure (includes logo) for use with:
HP G62 biscotti computer models
595191-001
Presario CQ62 biscotti computer models
602172-001
Presario CQ62 matte black computer models
595194-001
HP G62 silver computer models (for model 1.1 only)
605145-001
HP G62 matte black computer models (for model 1.1 only)
608111-001
HP G62 CCFL biscotti computer models (for model 1.1 only)
616461-001
HP G62 charcoal computer models (for models 1.2 and 1.3 only)
615585-001
HP G62 imperial blue computer models (for models 1.2 and 1.3 only)
622564-001
Display hinge covers
600650-001
Display Rubber Kit (not illustrated, includes display bezel rubber screw covers)
595198-001
Display Screw Kit (not illustrated)
595197-001
Maintenance and Service Guide
3–11
Illustrated parts catalog
Plastics Kit
Item
3–12
Description
Spare part number
Plastics Kit:
595200-001
1
Hard drive cover
2
Wireless module compartment cover
Maintenance and Service Guide
Illustrated parts catalog
Mass storage devices
Item
Description
1
Hard drive (includes connector and bracket)
750 GB, 5400 rpm (for models 1.2 and 1.3 only)
603787-001
640 GB, 5400 rpm (for models 1.1, 1.2 and 1.3 only)
603785-001
500 GB, 7200 rpm
634919-001
320 GB, 7200 rpm
599055-001
250 GB, 7200 rpm
599054-001
160 GB, 7200 rpm (for models 1.0, 1.1 and 1.2 only)
599053-001
Hard Drive Hardware Kit (not illustrated, includes bracket and screws)
2
Spare part number
599057-001
Optical drive (includes bezel and bracket)
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for
use with:
Biscotti computer models
599062-001
Matte black computer models (for models 1.1, 1.2 and 1.3 only)
600651-001
Silver computer models (for model 1.1 only)
608112-001
Charcoal computer models (for models 1.2 and 1.3 only)
615588-001
Imperial blue computer models (for models 1.2 and 1.3 only)
622565-001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use
with:
Biscotti computer models
599063-001
Matte black computer models (for models 1.1 and 1.2 only)
600652-001
Silver computer models (for model 1.1 only)
608114-001
Charcoal computer models (for model 1.2 only)
615589-001
Imperial blue computer models (for model 1.2 only)
622566-001
Maintenance and Service Guide
3–13
Illustrated parts catalog
Miscellaneous parts
Description
Spare part number
AC adapter:
65-W AC adapter
613152-001
90-W AC adapter
613153-001
90-WAC adapter
613160-001
65-WAC adapter
613161-001
Cable Kit
Hard drive connector cable
Optical drive connector cable
Power button cable
RJ-11 cable
TouchPad button board cable
TouchPad cable
USB cable
595201-001
Power cord (for use with both HP G62 and Presario CQ 62 computer models) for use in:
Argentina (for models 1.0, 1.1 and 1.2 only)
490371-D01
Australia
490371-011
Brazil (for models 1.1 and 1.2 only)
490371-202
Denmark
490371-081
Europe
490371-021
India
490371-D61
Israel
490371-BB1
Italy
490371-061
Japan
490371-291
Korea
490371-AD1
North America
430971-001
the People’s Republic of China
490371-AA1
South Africa
490371-AR1
Switzerland
490371-111
Taiwan
490371-AB1
Thailand
490371-201
the United Kingdom and Singapore
490371-031
Screw Kit
Phillips PM2.0x3.0 screw
Phillips PM2.5x3.0 screw
Phillips PM2.5x4.0 screw
Phillips PM2.5x5.0 screw
Phillips PM2.5x6.5 screw
3–14
595202-001
Maintenance and Service Guide
Illustrated parts catalog
Sequential part number listing
Spare part number
Description number
490371-001
Power cord for use in North America with both HP G62 and Presario CQ62 computer models
490371-011
Power cord for use in Australia with both HP G62 and Presario CQ62 computer models
490371-021
Power cord for use in Europe with both HP G62 and Presario CQ62 computer models
490371-031
Power cord for use in the United Kingdom and Singapore with both HP G62 and Presario CQ62
computer models
490371-061
Power cord for use in Italy with both HP G62 and Presario CQ62 computer models
490371-081
Power cord for use in Denmark with both HP G62 and Presario CQ62 computer models
490371-111
Power cord for use in Switzerland with both HP G62 and Presario CQ62 computer models
490371-201
Power cord for use in Thailand with both G62 and HP G62 and Presario CQ62 computer models
490371-202
Power cord for use in Brazil with both G62 and HP G62 and Presario CQ62 computer models (for
models 1.1 and 1.2 only)
490371-291
Power cord for use in Japan with both G62 andHP G62 and Presario CQ62 computer models
490371-AA1
Power cord for use in the People’s Republic of China with both HP G62 and Presario CQ62
computer models
490371-AB1
Power cord for use in Taiwan with both HP G62 and Presario CQ62 computer models
490371-AD1
Power cord for use in Korea with both HP G62 and Presario CQ62 computer models
490371-AR1
Power cord for use in South Africa with both HP G62 and Presario CQ62 computer models
490371-BB1
Power cord for use in Israel with both HP G62 and Presario CQ62 computer models
490371-D01
Power cord for use in Argentina with both HP G62 and Presario CQ62 computer models (for models
1.0, 1.1 and 1.2 only)
490371-D61
Power cord for use in India with both HP G62 and Presario CQ62 computer models
510100-001
56K V.92 data/fax modem (select models only, for use in all countries and regions except for Australia
and New Zealand) (for models 1.0 and 1.1 only)
510100-011
56K V.92 data/fax modem (select models only, for use in Australia and New Zealand) (for models 1.0
and 1.1 only)
534419-001
Intel Celeron 900 Processor (3M cache, 2.2 GHz) (for models 1.1 and 1.2 only)
537921-001
Bluetooth module (for models 1.0 and 1.1 only)
572925-001
Intel Penryn T3100 Processor (3M cache, 1.9 GHz) (for model 1.1 only)
572929-001
Intel Penryn T4300 Processor (3M cache, 2.1 GHz) (for model 1.1 only)
580101-001
Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter for use in Canada, the Cayman Islands, Guam,
Puerto Rico, the United States, and the US Virgin Islands
(Continued)
Maintenance and Service Guide
3–15
Illustrated parts catalog
Spare part number
Description number
580101-002
Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentian, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain,
Barbados, Belgium, Belize, Benin, Bhutan, Bosnia and Herzegovina, Botswana, Brazil, Brunei,
Bulgeria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Central African Republic, Chad,
Chile, China, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Zaire,
Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equitorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar,
Greece, Grenada, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong, Hungary,
Iceland, India, Indonesia, Ireland, Italy, Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya,
Kiribati, Korea-South, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Martinique, Nether
Antilles, French Guiana, Aruba, British Virgin Islands, Bermuda, Syria, Guadeloupe, Liechtenstein,
Lithuania, Luxembourg, Macedonia, Madagaascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall
Islands, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco,
Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway,
Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Republic of
Moldova, Romania, rwanda, Samoa, San Marino, Sao tome and Principe, Saudi Arabia, Senegal,
Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands,
Somalia, South Africa, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and Gren, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Timor (East), Togo, Tonga,
Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, United Arab Emirates ,United
Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, and Zimbabwe
582562-001
Broadcom 4312G 802.11 b/g WiFi adapter for use in Canada, the Cayman Islands, Guam, Puerto Rico,
the U.S. Virgin Islands, and the United States (for models 1.0 and 1.1 only)
582562-002
Broadcom 4312G 802.11 b/g WiFi adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola,
Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas,
Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia
and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo,
Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican
Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji,
Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece,
Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya,
Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique,
Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of
China, Peru, the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda,
Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the
Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa,
South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines,
Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and
Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United
Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
(for models 1.0 and 1.1 only)
584296-001
Intel Penryn T4400 Processor (3M cache, 2.2 GHz) (for models 1.1 and 1.2 only)
587259-001
Intel Core i7-620M Processor (4M cache, 2.66 GHz, SC turbo up to 3.33 GHz) (for model 1.0 only)
591880-001
Intel Penryn T4500 Processor (3M cache, 2.3 GHz) (for model 1.1 only)
592399-001
Intel Penryn T3300 Processor (3M cache, 2.0 GHz) (for models 1.1 and 1.2 only)
(Continued)
3–16
Maintenance and Service Guide
Illustrated parts catalog
Spare part number
Description number
593530-001
Intel WiFi Link 5100 802.11/b/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas,
Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia
and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cameroon, Canada, Cape Verde, the Cayman Islands, the Central African Republic, Chad, Chile,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guam, Guinea, Guinea-Bissau,
Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast,
Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali,
Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New
Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, the
People's Republic of China, Peru, the Philippines, Poland, Portugal, Puerto Rico, the Republic of
Moldova, Romania, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal,
Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon
Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St.
Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania,
Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the United Arab
Emirates, the United Kingdom, Uruguay, the U.S. Virgin Islands, the United States, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
593531-001
Intel WiFi Link 5100 802.11/b/g WLAN module for use in Pakistan, Russia, and Ukraine (for model 1.0
only)
593533-001
Realtek RTL8191SE 802.11b/g/n 1x1 WiFi Adapter (for models 1.0, 1.1 and 1.2 only)
593553-001
Battery, 6-cell, 2.20 Ah, 47 Wh
593554-001
Battery, 6-cell, 2.55 Ah, 55 Wh
594187-001
Intel Core i5-520M Processor (3M cache, 2.4 GHz, SC turbo up to 2.93 GHz) (for models 1.0, 1.1 and
1.2 only)
594188-001
Intel Core i5-540M Processor (3M cache, 2.53 GHz, SC turbo up to 3.06 GHz) (for models 1.0, 1.1 and
1.2 only)
595130-001
High Definition display panel (includes display panel and backlight cables)
595181-001
HM55 Discrete system board (for models 1.0 and 1.1 only)
595182-001
HM55 UMA system board
595183-001
HM55 HDMI Discrete system board (for models 1.0 and 1.1 only)
595184-001
HM55 HDMI UMA system board
595185-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 biscotti computer models
595186-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 biscotti computer models with
webcam
595187-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for Presario CQ62 matte black computer
models
595188-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for Presario CQ62 matte black computer
models with webcam
595189-001
Display bezel for use with Presario CQ62 with microphone module only
595190-001
Display bezel for use with Presario CQ62 with webcam and microphone modules
595191-001
Display enclosure for use with HP G62 biscotti computer models
595192-001
Display bezel for use with HP G62 with microphone module only
Continued
Maintenance and Service Guide
3–17
Illustrated parts catalog
Spare part number
Description number
595193-001
Display bezel for use with HP G62 with webcam and microphone modules
595194-001
Display enclosure for use with Presario CQ62 matte black computer models
595195-001
Display hinge kit (includes left and right display hinges)
595196-001
Wireless antenna kit (includes wireless antenna transceivers and cable)
595197-001
Display screw kit
595198-001
Display rubber kit
595199-001
Keyboard for use in North America (includes keyboard cable)
595199-031
Keyboard for use in the United Kingdom (includes keyboard cable)
595199-041
Keyboard for use in Germany (includes keyboard cable)
595199-051
Keyboard for use in France (includes keyboard cable)
595199-061
Keyboard for use in Italy (includes keyboard cable)
595199-071
Keyboard for use in Spain (includes keyboard cable)
595199-121
Keyboard for use in Canada (includes keyboard cable)
595199-131
Keyboard for use in Portugal (includes keyboard cable)
595199-141
Keyboard for use in Turkey (includes keyboard cable)
595199-161
Keyboard for use in Latin America (includes keyboard cable) (for model 1.1 only)
595199-171
Keyboard for use in Saudi Arabia s (includes keyboard cable)
595199-201
Keyboard for use in Brazil (includes keyboard cable) (for model 1.1 only)
595199-211
Keyboard for use in Hungary (includes keyboard cable)
595199-221
Keyboard for use in the Czech Republic (includes keyboard cable)
595199-251
Keyboard for use in Russia (includes keyboard cable)
595199-281
Keyboard for use in Thailand (includes keyboard cable)
595199-291
Keyboard for use in Japan (includes keyboard cable)
595199-A41
Keyboard for use in Belgium (includes keyboard cable)
595199-AB1
Keyboard for use in Taiwan (includes keyboard cable)
595199-AD1
Keyboard for use in Korea (includes keyboard cable)
595199-B31
Keyboard for international use (includes keyboard cable)
595199-BA1
Keyboard fo use in Adriatics (includes keyboard cable)
595199-BB1
Keyboard for use in Israel (includes keyboard cable)
595199-BG1
Keyboard for use in Switzerland (includes keyboard cable)
595199-DH1
Keyboard for use in Norway (includes keyboard cable)
595199-DJ1
Keyboard for use in Greece (includes keyboard cable)
595200-001
Plastics kit
595201-001
Cable kit
595202-001
Screw kit
595203-001
Touchpad button board
595204-001
Power button board
595205-001
USB board
Continued
3–18
Maintenance and Service Guide
Illustrated parts catalog
Spare part number
Description number
595206-001
Top cover (includes TouchPad board) for use in biscotti computer models
595207-001
Top cover (includes TouchPad board) for use in matte black computer models (for models 1.0 and 1.1
only)
595832-001
Fan/heat sink assembly for use with UMA systems (includes replacement thermal material)
595833-001
Fan/heat sink assembly for use with discrete systems (includes replacement thermal material)
597622-001
Intel Core i3-330M Processor (3M cache, 2.13 GHz) (for model 1.0 only)
597623-001
Intel Core i3-350M Processor (3M cache, 2.26 GHz) (for models 1.0, 1.1 and 1.2 only)
597624-001
Intel Core i5-430M Processor (3M cache, 2.26 GHz, SC turbo up to 2.53 GHz) (for models 1.0, 1.1 and
1.2 only)
598856-001
2 GB memory module (1066 MHz, DDR3)
598859-001
1 GB memory module (1066 MHz, DDR3)
599053-001
160 GB, 7200 rpm hard drive (for models 1.0, 1.2 and 1.3 only)
599054-001
250 GB, 7200 rpm hard drive
599055-001
320 GB, 7200 rpm hard drive
599057-001
Hard Drive Hardware Kit (includes bracket and screws)
599062-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with biscotti
computer models
599063-001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with biscotti
computer models
599092-001
4 GB memory module (1066 MHz, DDR3) (for models 1.2 and 1.3 only)
600166-001
Webcam module
600370-001
Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo adapter (BT3.0+HS
ready) (for models 1.2 and 1.3 only)
600650-001
Display hinge covers
600651-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with matte black
computer models (for models 1.0, 1.1 and 1.2 only)
600652-001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with matte black
computer models (for models 1.0 1.1 and 1.3 only)
600849-001
Rubber kit (ncludes four rubber feet)
602170-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for Presario CQ62 biscotti computer
models
602171-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for Presario CQ62 biscotti computer
models with webcam
602172-001
Display enclosure for use with Presario CQ62 biscotti computer models
602538-001
Bluetooth module cable (for models 1.0 and 1.1 only)
602743-001
Power connector (includes cable)
602744-001
Speaker assembly (includes cable)
602745-001
RTC battery
602992-001
Ralink RT3090BC4 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter (BT3.0+HS ready)
(for models 1.2 and 1.3 only)
603785-001
640 GB, 5400 rpm hard drive (for models 1.1, 1.2 and 1.3 only)
603787-001
750 GB, 5400 rpm hard drive (for models 1.2 and 1.3 only)
Continued
Maintenance and Service Guide
3–19
Illustrated parts catalog
Spare part number
Description number
605139-001
GL40 UMA system board (for models 1.1 and 1.2 only)
605140-001
HD5470/512 MB discrete system board (for models 1.1 and 1.2 only)
605141-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 silver computer models (for
model 1.1 only)
605142-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 silver computer models with
webcam (for model 1.1 only)
605145-001
Display enclosure for use with HP G62 silver computer models (for model 1.1 only)
605147-001
Top cover (includes TouchPad board) for use in silver computer models (for model 1.1 only)
606573-001
Fan/heat sink assembly for use with UMA GL40 systems (includes replacement thermal material) (for
models 1.1 and 1.2 only)
608109-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 matte black computer models
(for model 1.1 only)
608110-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 matte black computer models
with webcam (for model 1.1 only)
608111-001
Display enclosure for use with HP G62 matte black computer models (for model 1.1 only)
608112-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with silver
computer models (for model 1.1 only)
608114-001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with silver computer
models (for model 1.1 only)
613152-001
65-W AC adapter
613153-001
90-W AC adapter
613160-001
90-WAC adapter
613161-001
65-WAC adapter
613584-001
Intel Core i3-370M Processor (3M cache, 2.4 GHz, SC turbo up to 2.53 GHz) (for models 1.1, 1.2 and
1.3 only)
613585-001
Intel Core i5-450M Processor (3M cache, 2.4 GHz, SC turbo up to 2.53 GHz) (for models 1.1, 1.2 and
1.3 only)
613586-001
Pentium Arrandale P6000 Processor (3M cache, 1.86 GHz) (for models 1.1 and 1.2 only)
613587-001
Pentium Arrandale P6100 Processor (3M cache, 2.0 GHz) (for models 1.2 and 1.3 only)
615577-001
HM55 HD545V discrete system board (for model 1.1 only)
615578-001
HM55 HD545V discrete system board with HDMI card reader (for model 1.1 only)
615579-001
HD5470/512 MB discrete system board (for model 1.2 only)
615580-001
HD5470/512 MB discrete system board with HDMI card reader (for model 1.2 only)
615581-001
HD5470/1 G discrete system board (for model 1.2 only)
615582-001
HD5470/1 G discrete system board with HDMI card reader (for model 1.2 only)
615583-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 charcoal computer models (for
models 1.2 and 1.3 only)
615584-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 charcoal computer models with
webcam (for modesl 1.2 and 1.3 only)
615585-001
Display enclosure for use with HP G62 charcoal computer models (for models 1.2 and 1.3 only)
615588-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with charcoal
computer models (for models 1.2 and 1.3 only)
Continued
3–20
Maintenance and Service Guide
Illustrated parts catalog
Spare part number
Description number
615589-001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with charcoal
computer models (for models 1.2 and 1.3 only)
615590-001
Top cover (includes TouchPad board) for use in charcoal computer models (for modesl 1.2 and 1.3
only)
615591-001
Base enclosure with HDMI card reader for charcoal computer models (for models 1.2 and 1.3 only)
616448-001
GL40 DDR2 UMA system board (for model 1.1 only)
616449-001
GL40 DDR2 UMA system board with HDMI card reader (for model 1.1 only)
616450-001
High Definition CCFL display panel (includes display panel and backlight cables) (for model 1.1 only)
616452-001
39.6-cm (15.6-in) HD, light-emitting diode CCFL display assembly for HP G62 biscotti computer
models with webcam (for model 1.1 only)
616460-001
CCFL Display bezel for use with HP G62 with microphone and webcam modules (for model 1.1 only)
616461-001
CCFL Display enclosure for use with HP G62 biscotti computer models (for model 1.1 only)
616465-001
CCFL Display hinge kit (includes left and right display hinges) (for model 1.1 only)
616466-001
CCFL Display cable kit (for model 1.1 only)
616467-001
Inverter (for model 1.1 only)
617019-001
Base enclosure with HDMI card reader for biscotti computer models
617020-001
Base enclosure for biscotti computer models
617021-001
Base enclosure with HDMI card reader for matte black computer models (for models 1.1 and 1.2 only)
617022-001
Base enclosure for matte black computer models (for models 1.0, 1.1 and 1.2 only)
617023-001
Base enclosure with HDMI card reader for silver computer models (for model 1.1 only)
617024-001
Fan/heat sink assembly for use with HD545V discrete systems (includes replacement thermal material)
(for model 1.1 only)
619545-001
1 GB memory module (6400 MHz, DDR2) (for model 1.1 only)
619546-001
2 GB memory module (6400 MHz, DDR2) (for model 1.1 only)
619997-001
Intel Centrino Advanced -N + WiMAX 6250 (for model 1.3 only)
622562-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 imperial blue computer models
(for models 1.2 and 1.3 only)
622563-001
39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 imperial blue computer models
with webcam (for models 1.2 and 1.3 only)
622564-001
Display enclosure for use with HP G62 imperial blue computer models (for models 1.2 and 1.3 only)
622565-001
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with imperial
blue computer models (for models 1.2 and 1.3 only)
622566-001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with imperial blue
computer models (for models 1.2 and 1.3 only)
622567-001
Top cover (includes TouchPad board) for use in imperial blue computer models (for models 1.2 and 1.3
only)
622568-001
Base enclosure with HDMI card reader for imperial blue computer models (for models 1.2 and 1.3 only)
625823-001
Intel Core i3-380M Processor (3M cache, 2.53 GHz, SC turbo up to 2.53 GHz) (for models 1.2 and 1.3
only)
625824-001
Intel Core i5-560M Processor (3M cache, 2.66-3.2 GHz, SC turbo up to 2.53 GHz) (for models 1.2 and
1.3 only)
Continued
Maintenance and Service Guide
3–21
Illustrated parts catalog
3–22
Spare part number
Description number
625825-001
Intel Core i5-580M Processor (3M cache, 2.66-3.33 GHz, SC turbo up to 2.53 GHz) (for models 1.2
and 1.3 only)
625830-001
Intel Penryn T3500 Processor (3M cache, 2.1 GHz) (for model 1.2 only)
625831-001
Intel Pentium P6200 Processor (3M cache, 2.13 GHz) (for models 1.2 and 1.3 only)
626039-001
Intel Core i5-460M Processor (3M cache, 2.53 GHz, SC turbo up to 2.53 GHz) (for models 1.2 and 1.3
only)
628482-001
HM55 WiMax UMA system board with HDMI card reader (for model 1.3 only)
630703-001
WLAN 1x1 HMC (for model 1.3 only)
631593-001
HD6370/512 MB discrete system board (for model 1.3 only)
631594-001
HD6370/1 GB discrete system board (for model 1.3 only)
631595-001
HD6370/512 MB discrete system board with HDMI card reader (for model 1.3 only)
631596-001
HD6370/1 GB discrete system board with HDMI card reader (for model 1.3 only)
634428-001
Thermal pad kit for processor
634433-001
Thermal pad kit for South Bridge chipset
634648-001
i3-350M UMA system board (for model 1.3 only)
634649-001
HD6370/512 MB i3-350M discrete system board (for model 1.3 only)
634650-001
Thermal module for discrete systems (for model 1.3 only)
634651-001
Thermal module for UMA (for model 1.3 only)
634692-001
Intel Processor I3-390M 2.66GHz (for model 1.3 only)
634693-001
Intel 15-480MProcessor 2.3GHz (for model 1.3 only)
634919-001
500 GB, 7200 rpm hard drive
635500-001
Intel Pentium P6300 Processor (3M cache 2.26 GHz) (for model 1.3 only)
636636-001
Intel Celeron 925 Processor 2.3GHz (for model 1.3 only)
637583-001
i3-370M UMA system board (for model 1.3 only)
637584-001
HD6370/512 MB i3-370M (for model 1.3 only)
Maintenance and Service Guide
4
Removal and replacement procedures
Preliminary replacement requirements
Tools required
Use the following tools to complete the removal and replacement procedures:
■
Flat-bladed screwdriver
■
Magnetic screwdriver
■
Phillips P0 and P1 screwdrivers
Service considerations
Before disassembly or assembly procedures, review and adhere to all service considerations.
you remove each subassembly from the computer, place the subassembly (and all accompanying screws)
✎ As
away from the work area to prevent damage.
Plastic parts
Ä
CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the
plastic parts. Apply pressure only at the points designated in the maintenance instructions.
Cables and connectors
Ä
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly
process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the
cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid
bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught or
snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily.
Maintenance and Service Guide
4–1
Removal and replacement procedures
Drive handling
Ä
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a
drive, or loss of information, observe these precautions:
■ Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is off or in
Hibernation, turn the computer on, and then shut it down through the operating system.
■ Before handling a drive, be sure that you are discharged of static electricity. While handling a drive, avoid touching the
connector.
■ Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and be sure that the optical
drive tray is closed.
■ Handle drives on surfaces covered with at least one inch of shock-proof foam.
■ Avoid dropping drives from any height onto any surface.
■ After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
■ Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
■ Avoid exposing a drive to temperature extremes or liquids.
■ If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective packaging and label
the package “FRAGILE.”
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the
degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD
contains enough power to alter device parameters or melt silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage might have occurred.
An electronic device exposed to ESD might not be affected at all and can work perfectly throughout a normal cycle.
Or the device might function normally for a while, then degrade in the internal layers, reducing its life expectancy.
Ä
4–2
CAUTION: To prevent damage to the computer when you are removing or installing internal components, observe these
precautions:
■ Keep components in their electrostatic-safe containers until you are ready to install them.
■ Use nonmagnetic tools.
■ Before touching an electronic component, discharge static electricity by using the guidelines described in this section.
■ Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
■ If you remove a component, place it in an electrostatic-safe container.
Maintenance and Service Guide
Removal and replacement procedures
The following table shows how humidity affects the electrostatic voltage levels generated by different activities.
Ä
CAUTION: A product can be degraded by as little as 700 V.
Relative humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
■
To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
■
Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.
■
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
■
Place items on a grounded surface before removing items from their containers.
■
Always be properly grounded when touching a component or assembly.
■
Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive foam.
■
Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that mechanized equipment
used for moving materials is wired to ground and that proper materials are selected to avoid static charging.
When grounding is not possible, use an ionizer to dissipate electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
■
Cover the workstation with approved static-shielding material.
■
Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and
equipment.
■
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
■
When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe materials.
■
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and Styrofoam.
■
Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these items
only at static-free workstations.
■
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
■
Turn off power and input signals before inserting or removing connectors or test equipment.
Maintenance and Service Guide
4–3
Removal and replacement procedures
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
■
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a
minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly
against the skin at all times. On grounded mats with banana-plug connectors, use alligator clips to connect a
wrist strap.
■
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can be used at
standing workstations and are compatible with most types of shoes or boots. On conductive floors or
dissipative floor mats, use foot straps on both feet with a minimum of one megohm resistance between the
operator and ground. To be effective, the conductive strips must be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
■
Antistatic tape
■
Antistatic smocks, aprons, and sleeve protectors
■
Conductive bins and other assembly or soldering aids
■
Nonconductive foam
■
Conductive tabletop workstations with ground cords of one megohm resistance
■
Static-dissipative tables or floor mats with hard ties to the ground
■
Field service kits
■
Static awareness labels
■
Material-handling packages
■
Nonconductive plastic bags, tubes, or boxes
■
Metal tote boxes
■
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
4–4
Material
Use
Voltage protection level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Maintenance and Service Guide
Removal and replacement procedures
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 62 screws, in 5 different sizes, that must be removed, replaced, or loosened when servicing
the computer. Make special note of each screw size and location during removal and replacement.
Service tag
When ordering parts or requesting information, provide the computer serial number and model number located
on the service tag.
Item
Component
Description
1
Product name
The name affixed to the front of the computer.
2
Serial number (s/n)
An alphanumeric identifier that is unique to each product.
3
Part number/Product number (p/n)
This number provides specific information about the product’s
hardware components. The part number helps a service
technician to determine what components and parts are needed.
4
Warranty period
The duration of the warranty period for the computer.
5
Model description
An alphanumeric identifier used to locate documents, drivers, and
support for the computer.
Maintenance and Service Guide
4–5
Removal and replacement procedures
Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part
number 595198-001. There are 4 rubber feet that attach to the base enclosure in the locations illustrated below.
4–6
Maintenance and Service Guide
Removal and replacement procedures
Battery
Description
Spare part number
6 cell, 2.20-Ah, 47-Wh battery
593553-001
6-cell Li-lon, 2.55 Ah, 55 Wh
593554-001
Before disassembling the computer:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
Remove the battery:
1. Turn the computer upside down on a flat surface, with the battery bay toward you.
2. Slide the battery release latch 1 to release the battery.
3. Pivot the battery 2 upward and remove it 3 from the computer.
To insert the battery, insert the rear edge of the battery into the battery bay and pivot the front edge downward until
the battery is seated. The battery release latch automatically locks the battery into place.
Maintenance and Service Guide
4–7
Removal and replacement procedures
Hard drive
hard drive spare part kit includes a hard drive bracket and hard drive connector. The hard drive bracket and
✎ The
hard drive connector, as well as the hard drive bracket screws, are also available in the Hard Drive Hardware Kit.
Description
Spare part number
750 GB, 5400 rpm (for models 1.2 and 1.3 only)
603787-001
640 GB, 5400 rpm (for models 1.1, 1.2 and 1.3 only)
603785-001
500 GB, 7200 rpm
634919-001
320 GB, 7200 rpm
599055-001
250 GB, 7200 rpm
599054-001
160 GB, 7200 rpm (for models 1.0, 1.1 and 1.2 only)
599053-001
Hard Drive Hardware Kit (not illustrated, includes connector, bracket, and screws)
599057-001
Before removing the hard drive:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
Remove the hard drive:
1. Loosen the two Phillips PM2.5×6.0 captive screws 1 that secure the hard drive cover to the computer.
2. Lift the left side of the hard drive cover 2, lift it up and to the left 3, and remove the cover. The hard drive
cover is included in the Plastics Kit, spare part number 595200-001.
4–8
Maintenance and Service Guide
Removal and replacement procedures
3. Remove the three Phillips PM2.5×5.0 screws 1 that secure the hard drive to the computer.
4. Grasp the Mylar tabs 2 on the hard drive, and then slide the hard drive to the left to disconnect it from
the system board.
5. Disconnect the hard drive cable from the system board 3.
6. Remove the hard drive 4 from the hard drive bay.
7. To replace the hard drive bracket, remove the four Phillips PM3.0×4.0 hard drive bracket screws 1 from each
side of the hard drive.
8. Grasp the 2 attached Mylar tabs 2 and pull the bracket straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
Maintenance and Service Guide
4–9
Removal and replacement procedures
Memory module
Description
Spare part number
Memory module, 1 GB, 1066 MHz DDR3
598859-001
Memory module, 2 GB, 1066 MHz DDR3
598856-001
Memory module, 4 GB 1066 MHz DDR3 (for models 1.2 and 1.3 only)
599092-001
Memory module, 1 GB 6400 MHz DDR2 (for model 1.1 only)
619545-001
Memory module, 2 GB 6400 MHz, DDR2 (for model 1.1 only)
619546-001
Before removing the memory module:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
Remove the memory module:
1. Loosen the three Phillips PM2.5×6.0 captive screws 1 that secure the memory module cover to the computer.
2. Lift the back side of the memory module cover cover 2, lift it up 3, and remove the cover. The memory
module cover is included in the Plastics Kit, spare part number 595200-001.
4–10
Maintenance and Service Guide
Removal and replacement procedures
3. Spread the retaining tabs 1 away from the memory module. (The edge of the module opposite the slot rises
away from the computer.)
4. Remove the memory module 2 by pulling the module away from the slot at an angle.
Memory modules are designed with a notch 3 to prevent incorrect insertion into the memory module slot.
Reverse this procedure to install a memory module.
Maintenance and Service Guide
4–11
Removal and replacement procedures
Wireless module
Description
Spare part number
Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter
580101-001
Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter
580101-002
Intel WiFi Link 5100 802.11/b/g/n WLAN module
593530-001
Intel WiFi Link 5100 802.11/b/g WLAN module (for model 1.0 only)
593531-001
Broadcom 4312G 802.11 b/g WiFi adapter (for models 1.0 and 1.1 only)
582562-001
Broadcom 4312G 802.11 b/g WiFi adapter (for models 1.0 and 1.1 only)
582562-002
Realtek RTL8191SE 802.11b/g/n 1x1 WiFi Adapter (for models 1.0, 1.1 and 1.2 only)
593533-001
Ralink RT3090BC4 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter (BT3.0+HS ready)
(for models 1.2 and 1.3 only)
602992-001
Intel Centrino Advanced -N + WiMAX 6250 (for model 1.3 only)
619997-001
Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo adapter (BT3.0+HS
ready) (for models 1.2 and 1.3 only)
600370-001
5390 GN 802 11b/g/n 1x1 WiFi Adapater
630703-001
Before removing the WLAN module:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
5. Remove the memory module (see “Memory module” on page 4-10).
4–12
Maintenance and Service Guide
Removal and replacement procedures
Remove the wireless module:
Ä
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the
computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and
then receive a warning message, remove the module to restore computer functionality, and then contact technical support through
Help and Support.
1. Disconnect the main antenna cable 1 and the auxiliary antenna cable 2 from the wireless module.
black WLAN antenna cable (marked “1”) is connected to the WLAN module “Main” terminal. The white
✎ The
WLAN antenna cable (marked “2”) is connected to the WLAN module “Aux” terminal.
2. Remove the Phillips PM2.0×3.0 screw 3 that secures the WLAN module to the computer. (The edge of the
module opposite the slot rises away from the computer.)
3. Remove the WLAN module 4 by pulling the module away from the slot at an angle.
WLAN modules are designed with a notch 5 to prevent incorrect insertion.
✎
Reverse this procedure to install the wireless module.
Maintenance and Service Guide
4–13
Removal and replacement procedures
Optical drive
✎ The optical drive spare part kit includes an optical drive bezel and optical drive bracket.
Description
Spare part number
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with:
Biscotti computer models
599062-001
Matte black computer models (for models 1.1, 1.2 and 1.3 only)
600651-001
Silver computer models (for model 1.1 only)
608112-001
Charcoal computer models (for models 1.2 and 1.3 only)
615588-001
Imperial blue computer models (for model 1.2 only)
622565-001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with:
Biscotti computer models
599063-001
Matte black computer models (for models 1.1, 1.2 and 1.3 only)
600652-001
Silver computer models (for model 1.1 only)
608114-001
Charcoal computer models (for models 1.2 and 1.3 only)
615589-001
Imperial blue computer models (for models 1.2 and 1.3 only)
622566-001
Before removing the optical drive:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
5. Remove the hard drive (see “Hard drive” on page 4-8.)
Remove the optical drive:
1. Position the computer with the left side toward you.
2. Innsert a thin tool, such as a screw driver 1, into the release access slot in the hard drive bay. (The disc tray is
partially ejected from the optical drive.)
3. Grasp the bezel and slide the optical drive 2 out of the computer.
4–14
Maintenance and Service Guide
Removal and replacement procedures
Maintenance and Service Guide
4–15
Removal and replacement procedures
4. To replace the optical drive bracket, position the optical drive with the rear toward you.
5. Remove the two Phillips PM2.0×3.0 screws 1 that secure the optical drive bracket to the optical drive.
6. Remove the optical drive bracket 2.
Reverse this procedure to reassemble and install an optical drive.
4–16
Maintenance and Service Guide
Removal and replacement procedures
Keyboard
Description
Spare part number
For use in Adriatics
595199-BA1
For use in Belgium
595199-A41
For use in Brazil (for model 1.1 only)
595199-201
For use in Canada
595199-121
For use in the Czech Republic
595199-221
For use in France
595199-051
For use in Germany
595199-041
For use in Greece
595199-DJ1
For use in Hungary
595199-211
For International use
595199-B31
For use in Israel
595199-BB1
For use in Italy
595199-061
For use in Japan
595199-291
For use in Korea
595199-AD1
For use in Latin America (for models 1.1 only)
595199-161
For use in North America
595199-001
For use in Norway
595199-DH1
For use in Portugal
595199-131
For use in Russia
595199-251
For use in Saudi Arabia
595199-171
For use in Spain
595199-071
For use in Switzerland
595199-BG1
For use in Taiwan
595199-AB1
For use in Thailand
595199-281
For use in Turkey
595199-141
For use in the United Kingdom
595199-031
Before removing the keyboard:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery ( see “Battery” on page 4-7).
5. Remove the hard drive (see “Hard drive” on page 4-8).
6. Remove the memory module (see “Memory module” on page 4-10).
7. Remove the wireless module (see “Wireless module” on page 4-12).
8. Remove the optical drive (see “Optical drive” on page 4-14).
Maintenance and Service Guide
4–17
Removal and replacement procedures
Remove the keyboard:
1. Turn the computer upside down, with the front toward you.
2. Remove the three Phillips PM2.5×5.0 and three Phillips PM2.5x6.5 screws that secure the keyboard to the
computer.
3. Turn the computer right-side up, with the front toward you.
4. Open the computer as far as possible.
5. Release the tabs along the left 1 and right 2 edges of the keyboard using a thin flat-bladed screwdriver.
6. Lift the rear edge of the keyboard 3, and set the keyboard back towards the display 4.
4–18
Maintenance and Service Guide
Removal and replacement procedures
7. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and then disconnect
the keyboard cable 2 from the system board.
8. Remove the keyboard.
Reverse this procedure to install the keyboard.
Maintenance and Service Guide
4–19
Removal and replacement procedures
Top cover
Description
Spare part number
For use with biscotti computer models
595206-001
For use with matte black computer models (for models 1.0 and 1.1 only)
595207-001
For use with charcoal computer models (for models 1.2 and 1.3 only)
615590-001
For use with silver computer models (for model 1.1 only)
605147-001
For use with imperial blue computer models (for models 1.2 and 1.3 only)
622567-001
Before removing the top cover:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
5. Remove the hard drive (see “Hard drive” on page 4-8).
6. Remove the memory module (see “Memory module” on page 4-10).
7. Remove the wireless module (see “Wireless module” on page 4-12).
8. Remove the optical drive (see “Optical drive” on page 4-14).
9. Remove the keyboard (see “Keyboard” on page 4-17).
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
2. Remove four Phillips PM2.5x3 screws in the battery bay, and remove ten Phillips PM2.5x6.5 screws on the
base enclosure. The top cover screws are identified by a triangle icon embossed on the base enclosure.
3. Turn the computer right-side up, with the front toward you.
4. Open the computer as far as possible.
4–20
Maintenance and Service Guide
Removal and replacement procedures
5. Remove the Phillips PM2.5×6.0 screw that secures the switch cover to the computer.
6. Release the power button ZIF connector 1, speaker cable 2, touchpad ZIF connector 3, and touchpad button
ZIF connector 4.
Maintenance and Service Guide
4–21
Removal and replacement procedures
7. Lift the rear edge of the top cover 1 until the top cover disengages from the base enclosure.
8. Remove the top cover 2.
✎ The TouchPad is glued to the top cover and is included with the top cover spare part.
Reverse this procedure to install the top cover.
4–22
Maintenance and Service Guide
Removal and replacement procedures
Power button board
Description
Spare part number
Power button board
595204-001
Before removing the power button board:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
5. Remove the hard drive (see “Hard drive” on page 4-8).
6. Remove the memory module (see “Memory module” on page 4-10).
7. Remove the wireless module (see “Wireless module” on page 4-12).
8. Remove the optical drive (see “Optical drive” on page 4-14).
9. Remove the keyboard (see “Keyboard” on page 4-17).
10. Remove the top cover (see “Top cover” on page 4-20).
Remove the power button board:
1. Remove the Phillips PM2.0×3.0 screw 1 that secures the power button board to the top cover.
2. Lift up and remove the power button board 2.
Reverse this procedure to install the power button board.
Maintenance and Service Guide
4–23
Removal and replacement procedures
Touchpad button board
Description
Spare part number
Touchpad button board
595203-001
Before removing the touchpad button board:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
5. Remove the hard drive (see “Hard drive” on page 4-8).
6. Remove the memory module (see “Memory module” on page 4-10).
7. Remove the wireless module (see “Wireless module” on page 4-12).
8. Remove the optical drive (see “Optical drive” on page 4-14).
9. Remove the keyboard (see “Keyboard” on page 4-17).
10. Remove the top cover (see “Top cover” on page 4-20).
Remove the touchpad button board:
1. Remove the two Phillips PM2.0×3.0 screws 1 that secure the touchpad button board to the top cover.
2. Lift up and remove the touchpad button board 2.
Reverse this procedure to install the touchpad button board.
4–24
Maintenance and Service Guide
Removal and replacement procedures
Speakers
Description
Spare part number
Speaker assembly (includes cable)
602744-001
Before removing the speakers:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
5. Remove the hard drive (see “Hard drive” on page 4-8).
6. Remove the memory module (see “Memory module” on page 4-10).
7. Remove the wireless module (see “Wireless module” on page 4-12).
8. Remove the optical drive (see “Optical drive” on page 4-14).
9. Remove the keyboard (see “Keyboard” on page 4-17).
10. Remove the top cover (see “Top cover” on page 4-20).
Remove the speakers:
1. Remove the three Phillips PM2.5×3.0 screws 1 that secure the speaker assembly to the top cover.
2. Lift up and remove the speakers 2.
Reverse this procedure to install the speakers.
Maintenance and Service Guide
4–25
Removal and replacement procedures
Display assembly
Description
Spare part number
39.6-cm (15.6-in) High Definition (HD), light-emitting diode (LED) display assembly for use in:
HP G62 computer biscotti computer models
595185-001
HP G62 computer biscotti computer models with webcam
595186-001
Presario CQ62 biscotti computer models
602170-001
Presario CQ62 biscotti computer models with webcam
602171-001
Presario CQ62 matte black computer models
595187-001
Presario CQ62 matte black computer models with webcam
595188-001
HP G62 silver computer models (for model 1.1 only)
605141-001
HP G62 silver computer models with webcam (for model 1.1 only)
605142-001
HP G62 matte black computer models (for model 1.1 only)
608109-001
HP G62 matte black computer models with webcam (for model 1.1 only)
608110-001
HP biscotti computer model (for model 1.1 only)
616452-001
HP G62 charcoal computer models (for models 1.2 and 1.3 only)
615583-001
HP G62 charcoal computer models with webcam (for models 1.2 and 1.3 only)
615584-001
HP G62 imperial blue computer models (for models 1.2 and 1.3 only)
622562-001
HP G62 imperial blue computer models with webcam (for models 1.2 and 1.3 only)
622563-001
Before removing the display assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system. +
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
5. Remove the hard drive (see “Hard drive” on page 4-8).
6. Remove the memory module (see “Memory module” on page 4-10).
7. Remove the wireless module (see “Wireless module” on page 4-12).
8. Remove the optical drive (see “Optical drive” on page 4-14).
9. Remove the keyboard (see “Keyboard” on page 4-17).
10. Remove the top cover (see “Top cover” on page 4-20).
4–26
Maintenance and Service Guide
Removal and replacement procedures
Remove the display assembly:
1. Disconnect the display panel cable 1 and the microphone cable 2 from the system board and remove it from
its routing channel.
2. Pull the antenna cables through the opening in the top cover 3 and disengage the cables from the clip in the
routing channel leading to the display hinge 4.
3. Disconnect the webcam cable 5 from the system board and release it from the clips that attach it to the system
board.
Maintenance and Service Guide
4–27
Removal and replacement procedures
Ä
CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can
result in damage to the display assembly and other computer components.
4. Remove the four Phillips PM2.5×7.0 screws 1 securing the display hinges to the computer.
5. Lift the display panel 2 straight up to remove it.
Reverse this procedure to install the display assembly.
4–28
Maintenance and Service Guide
Removal and replacement procedures
6. To replace the display bezel or any of the display assembly internal components, remove the following screw
covers and screws:
1 2 mylar screw covers on the display bezel bottom edge. The display mylar screw covers are included in the
Display Rubber Kit, spare part number 595198-001.
2 Two Phillips PM2.5×7.0 screws on the display bezel bottom edge.
Maintenance and Service Guide
4–29
Removal and replacement procedures
7. To remove the Display Bezel, flex the inside edges of the bezel at the top and bottom 1, and the left and right
sides 2, until the bezel disengages from the display enclosure.
8. Remove the display bezel 3.
Reverse this procedure to install the display bezel.
9. To replace the webcam module (select models only), lift the webcam module as far from the display enclosure
as the webcam module cable allows.
10. Disconnect the webcam module cable 1 from the webcam module, and remove the webcam module 2. The
webcam module is available using spare part number 600166-001.
Reverse this procedure to install the webcam module.
4–30
Maintenance and Service Guide
Removal and replacement procedures
11. To replace the display hinge covers, remove the two Phillips PM2.5×6.0 screws 1 that secure each hinge to the
display enclosure.
12. Remove the display hinge covers 2. The display hinge covers are available using spare part number
600650-001.
Reverse this procedure to install the display hinge covers.
13. To replace the display panel, remove eight phillips PM2.5×6.0 screws 1 that secure the display panel to the
display enclosure.
14. Remove the display panel 2 from the display enclosure.
Reverse this procedure to install the display panel.
Maintenance and Service Guide
4–31
Removal and replacement procedures
15. To replace the display panel brackets, remove the two Phillips PM2.0×3.0 screws 1 that secure each bracket to
the display panel.
16. Remove the display panel brackets 2 from the display panel. The display panel brackets are available using
spare part number 595195-001.
Reverse this procedure to install the display panel brackets.
17. To replace the wireless antenna transceivers, lift up on the silver transceiver 1 and release the adhesive
material from the display cover 2.
18. Lift up to remove the antenna transceivers 3. The wireless antenna transceivers with cable is available with the
LCD cable kit using spare part number 595196-001.
Reverse this procedure to install the display wireless antenna transceivers.
4–32
Maintenance and Service Guide
Removal and replacement procedures
USB board
Description
Spare part number
USB board
595205-001
Before removing the USB board:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
5. Remove the hard drive (see “Hard drive” on page 4-8).
6. Remove the memory module (see “Memory module” on page 4-10).
7. Remove the wireless module (see “Wireless module” on page 4-12).
8. Remove the optical drive (see “Optical drive” on page 4-14).
9. Remove the keyboard (see “Keyboard” on page 4-17).
10. Remove the top cover (see “Top cover” on page 4-20).
11. Remove the display assembly (see “Display assembly” on page 4-26).
Remove the USB board:
1. Disconnect the USB board cable 1 from the system board.
2. Remove the Phillips PM2.5×60 screw 2 from the system board.
3. Lift the USB board 3 straight up to remove it from the computer. The USB cable is available with the cable kit
using spare part number 595201-001
Reverse this procedure to install a USB board.
Maintenance and Service Guide
4–33
Removal and replacement procedures
Power connector
Description
Spare part number
Power connector (includes cable)
602743-001
Before removing the power connector cable:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7)
5. Remove the battery (see “Battery” on page 4-7).
6. Remove the battery (see “Battery” on page 4-7).
7. Remove the hard drive (see “Hard drive” on page 4-8).
8. Remove the memory module (see “Memory module” on page 4-10).
9. Remove the wireless module (see “Wireless module” on page 4-12).
10. Remove the optical drive (see “Optical drive” on page 4-14).
11. Remove the keyboard (see “Keyboard” on page 4-17).
12. Remove the top cover (see “Top cover” on page 4-20).
13. Remove the display assembly (see “Display assembly” on page 4-26).
Remove the power connector cable:
1. To remove the power connector cable, disconnect the cable connector 1 from the system board.
2. Remove the power connector cable by lifting it straight up from the base enclosure 2.
Reverse this procedure to install the power connector cable.
4–34
Maintenance and Service Guide
Removal and replacement procedures
Bluetooth module
Description
Spare part number
Bluetooth module
537921-001
Bluetooth module cable
602538-001
Before removing the Bluetooth module:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
5. Remove the battery (see “Battery” on page 4-7).
6. Remove the hard drive (see “Hard drive” on page 4-8).
7. Remove the memory module (see “Memory module” on page 4-10).
8. Remove the wireless module (see “Wireless module” on page 4-12).
9. Remove the optical drive (see “Optical drive” on page 4-14).
10. Remove the keyboard (see “Keyboard” on page 4-17).
11. Remove the top cover (see “Top cover” on page 4-20).
12. Remove the display assembly (see “Display assembly” on page 4-26).
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable 1 from the system board.
2. Remove the Bluetooth module 2.
Reverse this procedure to install the Bluetooth module.
Maintenance and Service Guide
4–35
Removal and replacement procedures
Modem
Description
Spare part number
All countries and regions except for Australia and New Zealand (for models 1.0 and 1.1 only)
510100-001
Australia and New Zealand (for models 1.0 and 1.1 only)
510100-011
Before removing the modem:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7)
5. Remove the battery (see “Battery” on page 4-7).
6. Remove the battery (see “Battery” on page 4-7).
7. Remove the hard drive (see “Hard drive” on page 4-8).
8. Remove the memory module (see “Memory module” on page 4-10).
9. Remove the wireless module (see “Wireless module” on page 4-12).
10. Remove the optical drive (see “Optical drive” on page 4-14).
11. Remove the keyboard (see “Keyboard” on page 4-17).
12. Remove the top cover (see “Top cover” on page 4-20).
13. Remove the display assembly (see “Display assembly” on page 4-26).
Remove the modem:
1. Remove the two Phillips PM2.0×3.0 screws 1 that secure the modem to the system board.
2. Lift up the modem from the computer 2.
Reverse this procedure to install the modem.
4–36
Maintenance and Service Guide
Removal and replacement procedures
System board
system board spare part kit includes UMA or discrete graphics subsystem memory and replacement thermal
✎ The
material.
Description
Spare part number
HM55 Discrete system board (for models 1.0 and 1.1 only)
595181-001
HM55 UMA system board
595182-001
HM55 HDMI Discrete system board (for models 1.0 and 1.1 only)
595183-001
HM44 HDMI UMA system board
595184-001
HM55 HD545V discrete system board (for model 1.1 only)
615577-001
HM55 HD545V discrete system board with HDMI card reader (for model 1.1 only)
615578-001
GL40 UMA system board (for models 1.1 and 1.2 only)
605139-001
GL40 UMA system board with HDMI card reader (for models 1.1 and 1.2 only)
605140-001
HD5470/512 MB discrete system board (for model 1.2 only)
615579-001
HD5470/512 MB discrete system board with HDMI card reader (for model 1.2 only)
615580-001
HD5470/1 G discrete system board (for model 1.2 only)
615581-001
HD5470/1 G discrete system board with HDMI card reader (for model 1.2 only)
615582-001
GL40 DDR2 UMA system board (for model 1.1 only)
616448-001
GL40 DDR2 UMA system board with HDMI card reader (for model 1.1 only)
616449-001
HM55 WiMax UMA system board with HDMI card reader (for model 1.2 only)
628482-001
HD6370/512 MB discrete system board (for model 1.3 only)
631593-001
HD6370/1 GB discrete system board (for model 1.3 only)
631594-001
HD6370/512 MB discrete system board with HDMI card reader (for model 1.3 only)
631595-001
HD6370/1 GB discrete system board with HDMI card reader (for model 1.3 only)
631596-001
i3-350M UMA system board (for model 1.3 only)
634648-001
HD6370/512 MB i3-350M discrete system board (for model 1.3 only)
634649-001
i3-370M UMA system board (for model 1.3 only)
637583-001
HD6370/512 MB i3-370M (for model 1.3 only)
637584-001
Before removing the system board:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7)
5. Remove the battery (see “Battery” on page 4-7).
6. Remove the battery (see “Battery” on page 4-7).
7. Remove the hard drive (see “Hard drive” on page 4-8).
8. Remove the memory module (see “Memory module” on page 4-10).
9. Remove the wireless module (see “Wireless module” on page 4-12).
Maintenance and Service Guide
4–37
Removal and replacement procedures
10. Remove the optical drive (see “Optical drive” on page 4-14).
11. Remove the keyboard (see “Keyboard” on page 4-17).
12. Remove the top cover (see “Top cover” on page 4-20).
13. Remove the display assembly (see “Display assembly” on page 4-26).
When replacing the system board, be sure that the following components are removed from the defective system
board and installed on the replacement system board:
4–38
■
Memory module (see “Memory module” on page 4-10)
■
Wireless module (see “Wireless module” on page 4-12)
■
Modem module (see “Modem” on page 4-36)
■
Fan/heat sink assembly (see “Fan/heat sink assembly” on page 4-41)
■
Processor (see “Processor” on page 4-47)
Maintenance and Service Guide
Removal and replacement procedures
Remove the system board:
1. Disconnect the RJ-11 cable 1 from its mounting clip in the base enclosure.
2. Disconnect the optical drive connector cable 2 from the system board.
3. Disconnect the bluetooth cable 3 from the system board.
4. Disconnect the USB cable 4 from the system board.
5. Disconnect the power connector cable 5 from the system board.
6. Remove the three PM2.5×4.0 screws 1 that secure the system board to the base enclosure.
7. Grasp the right edge 2 of the system board.
8. Lift the system board 3, and pull it away from the base enclosure 4 at an angle.
Reverse this procedure to install the system board.
Maintenance and Service Guide
4–39
Removal and replacement procedures
RTC battery
Description
Spare part number
RTC battery
602745-001
Before removing the RTC battery:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7)
5. Remove the battery (see “Battery” on page 4-7).
6. Remove the battery (see “Battery” on page 4-7).
7. Remove the hard drive (see “Hard drive” on page 4-8).
8. Remove the memory module (see “Memory module” on page 4-10).
9. Remove the wireless module (see “Wireless module” on page 4-12).
10. Remove the optical drive (see “Optical drive” on page 4-14).
11. Remove the keyboard (see “Keyboard” on page 4-17).
12. Remove the top cover (see “Top cover” on page 4-20).
13. Remove the display assembly (see “Display assembly” on page 4-26).
14. Remove the sytem board (see “System board” on page 4-37).
Remove the RTC battery:
1. Use a sharp, non-conductive tool to release the clip 1 that secures the battery to the system board.
2. Lift the battery 2 out of the computer.
Reverse this procedure to install the RTC battery.
4–40
Maintenance and Service Guide
Removal and replacement procedures
Fan/heat sink assembly
Description
Spare part number
Fan/heat sink assembly (includes replacement thermal material) for use only with computer models
with UMA graphics subsystem memory
595832-001
Fan/heat sink assembly (includes replacement thermal material) for use only with computer models
with discrete graphics subsystem memory
595833-001
Fan/heat sink assembly (includes replacement thermal material) for use only with computer models
with GL40 UMA systems graphics subsystem memory (for models 1.1 and 1.2 only)
606573-001
Fan/heat sink assembly (includes replacement thermal material) for use only with computer models
with HD545V discrete graphics subsystem memory (for model 1.1 only)
617024-001
Fan/heat sink assembly (includes replacement thermal material) for use only with computer models
with discrete graphics subsystem memory (for model 1.3 only)
634650-001
Fan/heat sink assembly (includes replacement thermal material) for use only with computer models
with UMA graphics subsystem memory (for model 1.3 only)
634651-001
Before removing the fan/heat sink assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7)
5. Remove the battery (see “Battery” on page 4-7).
6. Remove the battery (see “Battery” on page 4-7).
7. Remove the hard drive (see “Hard drive” on page 4-8).
8. Remove the memory module (see “Memory module” on page 4-10).
9. Remove the wireless module (see “Wireless module” on page 4-12).
10. Remove the optical drive (see “Optical drive” on page 4-14).
11. Remove the keyboard (see “Keyboard” on page 4-17).
12. Remove the top cover (see “Top cover” on page 4-20).
13. Remove the display assembly (see “Display assembly” on page 4-26).
14. Remove the sytem board (see “System board” on page 4-37).
Maintenance and Service Guide
4–41
Removal and replacement procedures
Remove the fan/heat sink assembly:
to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board
✎ Due
components, you might need to move the fan/heat sink assembly from side to side to detach the assembly.
Ä
CAUTION: To avoid damage to the processor, loosen the fan/heat sink assembly screws in the sequence indicated on the heat
sink assembly. Likewise, tighten the screws in the same sequence when installing the fan/heat sink assembly.
✎ Steps 1 through 4 apply only to computer models equipped with graphics subsystems having UMA memory.
1. Turn the system board right-side up, with the front toward you.
2. Disconnect the fan cable from the system board.
4–42
Maintenance and Service Guide
Removal and replacement procedures
3. Loosen the four Phillips spring-loaded captive screws 1 that secure the fan/heat sink assembly.
4. Remove the fan/heat sink assembly 2 by lifting it straight up.
Maintenance and Service Guide
4–43
Removal and replacement procedures
✎ Steps 5 through 8 apply only to computer models equipped with graphics subsystems having discrete memory.
5. Turn the system board right-side up, with the front toward you.
6. Disconnect the fan cable from the system board.
7. Loosen the two Phillips captive screws 1 and four Phillips spring-loaded captive screws 2 that secure the
fan/heat sink assembly.
8. Remove the fan/heat sink assembly 3 by lifting it straight up.
Reverse this procedure to install the fan/heat sink assembly.
4–44
Maintenance and Service Guide
Removal and replacement procedures
The following illustration shows the replacement thermal material locations for computer models graphics
subsystems having UMA memory
thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system
✎ The
board components each time the fan/heat sink assembly is removed. Thermal grease is located on the section of
the fan/heat sink assembly 1 that services the processor 2. Replacement thermal grease and pads are included in
spare parts kits for all system boards, fan/heat sink assemblies, and processors.
Maintenance and Service Guide
4–45
Removal and replacement procedures
The following illustration shows the replacement thermal material locations for computer models equipped with
graphics subsystems with discrete memory.
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system
✎ board
components each time the fan/heat sink assembly is removed. Thermal grease is located on the section of
the fan/heat sink assembly 1 that services the processor 3. A thermal pad is located on the section of the
fan/heat sink assembly 2 that services the Northbridge chip 4. Replacement thermal grease and pads are
included with all system board, fan/heat sink assembly, and processor spare part kits.
Reverse this procedure to install the fan/heat sink assembly.
4–46
Maintenance and Service Guide
Removal and replacement procedures
Processor
✎ The processor spare part kit includes replacement thermal material.
Description
Spare part number
Intel Core i7-620M Processor (4M cache, 2.66 GHz, SC turbo up to 3.33 GHz) (for model 1.0 only)
587259-001
Intel Core i5-540M Processor (3M cache, 2.53 GHz, SC turbo up to 3.06 GHz) (for model 1.0, 1.1 and
1.2 only)
594188-001
Intel Core i5-520M Processor (3M cache, 2.4 GHz, SC turbo up to 2.93 GHz) (for model 1.0, 1.1 and
1.2 only)
594187-001
Intel Core i5-430M Processor (3M cache, 2.26 GHz, SC turbo up to 2.53 GHz) (for model 1.0, 1.1 and
1.2 only)
597624-001
Intel Core i3-350M Processor (3M cache, 2.26 GHz) (for model 1.0, 1.1 and 1.2 only)
597623-001
Intel Core i3-330M Processor (3M cache, 2.13 GHz) (for model 1.0 only)
597622-001
Intel Penryn T4300 Processor (3M cache, 2.1 GHz) (for model 1.1 only)
572929-001
Intel Penryn T3100 Processor (3M cache, 1.9 GHz) (for model 1.1 only)
572925-001
Intel Penryn T4400 Processor (3M cache, 2.2 GHz) (for models 1.1 and 1.2 only)
584296-001
Intel Penryn T3300 Processor (3M cache, 2.0 GHz) (for models 1.1 and 1.2 only)
592399-001
Pentium Arrandale P6000 Processor (3M cache, 1.86 GHz) (for models 1.1 and 1.2 only)
613586-001
Pentium Arrandale P6100 Processor (3M cache, 2.0 GHz) (for models 1.2 and 1.3 only)
613587-001
Intel Penryn T4500 Processor (3M cache, 2.3 GHz) (for model 1.1 only)
591880-001
Intel Core i5-450M Processor (3M cache, 2.4 GHz, SC turbo up to 2.53 GHz) (for models 1.1, 1.2 and
1.3 only)
613585-001
Intel Core i3-370M Processor (3M cache, 2.4 GHz, SC turbo up to 2.53 GHz) (for models 1.1, 1.2 and
1.3 only)
613584-001
Intel Core i5-560M Processor (3M cache, 2.66-3.2 GHz, SC turbo up to 2.53 GHz) (for models 1.2
and 1.3 only)
625824-001
Intel Core i5-460M Processor (3M cache, 2.53 GHz, SC turbo up to 2.53 GHz) (for models 1.2 and 1.3
only)
626039-001
Intel Core i3-380M Processor (3M cache, 2.53 GHz, SC turbo up to 2.53 GHz) (for models 1.2 and 1.3
only)
625823-001
Intel Pentium P6200 Processor (3M cache, 2.13 GHz) (for models 1.2 and 1.3 only)
625831-001
Intel Core i5-580M Processor (3M cache, 2.66-3.33 GHz, SC turbo up to 2.53 GHz) (for models 1.2
and 1.3 only)
625825-001
Intel Penryn T3500 Processor (3M cache, 2.1 GHz) (for model 1.2 only)
625830-001
Intel Celeron 900 Processor (3M cache, 2.2 GHz) (for models 1.1 and 1.2 only)
534419-001
Intel Pentium Arrandale P6300 Processor (3M cache 2.26 GHz) (for model 1.3 only)
635500-001
Intel Processor I3-390M 2.66GHz (for model 1.3 only)
634692-001
Intel 15-480MProcessor 2.3GHz (for model 1.3 only)
634693-001
Intel Celeron 925 Processor 2.3GHz (for model 1.3 only)
636636-001
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
Maintenance and Service Guide
4–47
Removal and replacement procedures
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7)
5. Remove the battery (see “Battery” on page 4-7).
6. Remove the battery (see “Battery” on page 4-7).
7. Remove the hard drive (see “Hard drive” on page 4-8).
8. Remove the memory module (see “Memory module” on page 4-10).
9. Remove the wireless module (see “Wireless module” on page 4-12).
10. Remove the optical drive (see “Optical drive” on page 4-14).
11. Remove the keyboard (see “Keyboard” on page 4-17).
12. Remove the top cover (see “Top cover” on page 4-20).
13. Remove the display assembly (see “Display assembly” on page 4-26).
14. Remove the sytem board (see “System board” on page 4-37).
15. Remove the fan/heat sink assembly (see “Fan/heat sink assembly” on page 4-41).
4–48
Maintenance and Service Guide
Removal and replacement procedures
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw 1 one-half turn counterclockwise until you
hear a click.
2. Lift the processor 2 straight up and remove it.
you install the processor, the gold triangle on the processor 3 must be aligned with the triangle embossed
✎ When
on the processor slot 4.
Reverse this procedure to install the processor.
Maintenance and Service Guide
4–49
Removal and replacement procedures
RJ-11 connector
Description
Spare part number
RJ-11 connector included in Cable Kit
595201-001
Before removing the RJ-11 connector:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7)
5. Remove the battery (see “Battery” on page 4-7).
6. Remove the battery (see “Battery” on page 4-7).
7. Remove the hard drive (see “Hard drive” on page 4-8).
8. Remove the memory module (see “Memory module” on page 4-10).
9. Remove the wireless module (see “Wireless module” on page 4-12).
10. Remove the optical drive (see “Optical drive” on page 4-14).
11. Remove the keyboard (see “Keyboard” on page 4-17).
12. Remove the top cover (see “Top cover” on page 4-20).
13. Remove the display assembly (see “Display assembly” on page 4-26).
14. Remove the sytem board (see “System board” on page 4-37).
4–50
Maintenance and Service Guide
Removal and replacement procedures
Remove the RJ-11 connector
1. Remove the cable from the clips 1, and then lift the connector straight up 2 and out of the computer.
Reverse this procedure to install the RJ-11 connector.
Maintenance and Service Guide
4–51
Removal and replacement procedures
4–52
Maintenance and Service Guide
5
Setup Utility
Starting Setup Utility
Setup Utility is a ROM-based information and customization utility that can be used even when the Windows
operating system is not working.
Ä
CAUTION: Open Setup Utility by turning on or restarting the computer. While the Press the ESC key for Startup Menu message
appears in the lower-left corner of the screen, press the f10 key.
The utility reports information about the computer and provides settings for startup, security, and other preferences.
To start Setup Utility:
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup Menu
message appears in the lower left corner of the screen, press the f10 key.
– or –
1. Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup Menu
message appears in the lower left corner of the screen, press the esc key.
2. When the Startup Menu appears, press the f10 key.
Changing the language of Setup Utility
The following procedure explains how to change the language of Setup Utility. If Setup Utility is not already
running, begin at step 1. If Setup Utility is already running, begin at step 2.
1. Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup Menu
message appears in the lower left corner of the screen, press the f10 key.
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup Menu
message appears in the lower left corner of the screen, press the esc key. When the Startup Menu appears, press
the f10 key.
2. Use the arrow keys to select System Configuration > Language, and then press the enter key.
3. Use the arrow keys to select a language, and then press the enter key.
4. When a confirmation prompt with the language selected appears, press the enter key.
5. To save the change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and then
press the enter key.
Changes go into effect immediately.
Maintenance and Service Guide
5–1
Setup Utility
Navigating and selecting in Setup Utility
Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selection are
by keystroke.
■ To choose a menu or a menu item, use the arrow keys.
■ To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the arrow keys or
press the f5 or f6 key.
■ To select an item, press the enter key.
■ To close a text box or return to the menu display, press the esc key.
■
To display additional navigation and selection information while Setup Utility is open, press the f1 key.
Displaying system information
Use Setup Utility to view such information as the system time and date and information that identifies the
computer. The following procedure explains how to do this. If Setup Utility is not open, begin at step 1. If Setup
Utility is open, begin at step 2.
1. Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup Menu
message appears in the lower left corner of the screen, press the f10 key.
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup Menu
message appears in the lower left corner of the screen, press the esc key. When the Startup Menu appears, press
the f10 key.
2. Select the Main menu.
3. To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit Discarding
Changes, and then press the enter key.
Restoring default settings in Setup Utility
The following procedure explains how to restore Setup Utility default settings. If Setup Utility is not already
running, begin at step 1. If Setup Utility is already running, begin at step 2.
1. Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup Menu
message appears in the lower left corner of the screen, press the f10 key.
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup Menu
message appears in the lower left corner of the screen, press the esc key. When the Startup Menu appears, press
the f10 key.
2. Use the arrow keys to select Exit > Load Setup Defaults, and then press the enter key.
3. When the Setup Confirmation appears, press the enter key.
4. To save the change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and then
press the enter key.
Setup Utility default settings go into effect when the computer restarts.
✎ The password, security, and language settings are not changed when you restore the factory default settings.
5–2
Maintenance and Service Guide
Setup Utility
Exiting Setup Utility
You can exit Setup Utility with or without saving changes.
■ To exit Setup Utility and save the changes from the current session:
If the Setup Utility menus are not visible, press the esc key to return to the menu display. Then use the arrow
keys to select Exit > Exit Saving Changes, and then press the enter key.
■ To exit Setup Utility without saving the changes from the current session:
If the Setup Utility menus are not visible, press the esc key to return to the menu display. Then use the arrow
keys to select Exit > Exit Discarding Changes, and then press the enter key.
After either choice, the computer restarts in Windows.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
✎ Some of the Setup Utility menu items listed in this chapter might not be supported by the computer.
Main menu
Select
To do this
System information
■ View and change the system time and date.
■ View identification information about the computer.
■ View specification information about the processor, memory size, system
BIOS, and keyboard controller version (select models only).
Security menu
Select
To do this
Administrator password
Enter, change, or delete an administrator password.
Power-On Password
Enter, change, or delete a power-on password.
Maintenance and Service Guide
5–3
Setup Utility
System Configuration menu
Select
To do this
Language Support
Change Setup Utility language.
Button Sound (select models only)
Enable/disable the capacitive button tapping sound.
Virtualization Technology (select models
only)
Enable/disable the processor Virtualization Technology.
Processor C6 State (select models only)
Enable/disable the processor C6 sleep state.
LAN Power Saving (select models only)
Enable/disable LAN Power Saving. When enabled, saves power when the
computer is in DC mode.
Card Reader/1394 Power Saving
(select models only)
Enable/disable Card Reader/1394 Power Saving. When enabled, saves power
when the computer is in DC mode.
Fan Always On
Enabled/disable Fan Always On. When enabled, the computer fan is on.
Boot Options
Set the following boot options:
■ f9 and f10 Delay (sec.)—Set the delay for the f9 and f10 functions of the Setup
Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
■ CD-ROM boot—Enable/disable boot from CD-ROM.
■ Floppy boot—Enable/disable boot from diskette.
■ Internal Network Adapter boot—Enable/disable boot from Internal Network
Adapter.
■ Boot Order—Set the boot order for:
USB Floppy
Internal CD/DVD ROM Drive
Processor C6 sleep state (select models only)
USB CD/DVD ROM drive
Hard drive
USB Diskette on Key
USB Hard drive
Network adapter
Diagnostics menu
Select
To do this
Hard Disk Self Test
Run a comprehensive self-test on the hard drive.
models with two hard drives, this menu option is called the
✎ On
Primary Hard Disk Self Test.
5–4
Secondary Hard Disk Self Test 
(select models only)
Run a comprehensive self-test on a secondary hard drive.
Memory Test
Run a diagnostic test on the system memory.
Maintenance and Service Guide
6
Specifications
Computer specifications
Metric
U.S.
Width
37.4 cm
14.7 in
Depth
24.7 cm
9.7 in
Height (front)
3.2 cm
1.3 in
Height (rear
3.7 cm
1.5
2.5 kg
5.5 Ibs
Dimensions
Weight
Equipped with 6-cell battery and optical drive
Input power
Operating voltage
18.5 V dc @ 3.5 A - 65 W or 19.0 V dc @ 4.74 A - 90 W
Operating current
3.5 A or 4.74 A
Temperature
Operating (not writing to optical disc)
0°C to 35°C
32°F to 95°F
Operating (writing to optical disc)
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
-4°F to 140°F
Operating
10% to 90%
10% to 90%
Nonoperating
5% to 95%
5% to 95%
Operating
-15 m to 3,048 m
-50 ft to 10,000 ft
Nonoperating
-15 m to 12,192 m
-50 ft to 40,000 ft
Relative humidity (noncondensing)
Maximum altitude (unpressurized)
product safety standards specify thermal limits for plastic surfaces. The computer operates well within this
✎ Applicable
range of temperatures.
Maintenance and Service Guide
6–1
Specifications
39.6-cm (15.6-in) HD display specifications
Metric
U.S.
Height
21.0 cm
8.27 in
Width
35.9 cm
14.1 in
Diagonal
39.6 cm
15.6 in
Number of colors
Up to 16.8 million
Contrast ratio
500:1 BV; 300:1 AG
Brightness
200 nits typical
Dimensions
Pixel resolution
6–2
Pitch
0.259 x 0.259 mm
Format
1368 x 768
Configuration
RGB vertical strip
Backlight
LED
Character display
80 x 25
Total power consumption
5.3 w
Viewing angle
+/-45° horizontal, +15/-35 vertical typical
Maintenance and Service Guide
Specifications
Hard drive specifications
750 GB*
500 GB*
320 GB*
250 GB*
160 GB*
Height
9.5 mm
9.5 mm
9.5 mm
9.5 mm
9.5 mm
Width
70 mm
70 mm
70 mm
70 mm
70 mm
Weight
101g
115 g
115 g
115 g
115 g
Interface type
SATA
SATA
SATA
SATA
SATA
Transfer rate
100 MB/sec
140 MB/sec
140 MB/sec
140 MB/sec
140 MB/sec
Security
ATA security
ATA security
ATA security
ATA security
ATA security
Single track
3 ms
3 ms
3 ms
3 ms
3 ms
Average
13 ms
13 ms
13 ms
13 ms
13 ms
Maximum
24 ms
24 ms
24 ms
24 ms
24 ms
Logical blocks
1,465,128,359
976, 773, 168
625,142, 448
488, 376,120
312, 560, 340
Disc rotational speed
5400 rpm
7200 rpm
7200 rpm
7200 rpm
7200 rpm
Dimensions
Seek times (typical read, including
setting)
Operating temperature
5°C to 55°C (41°F to 131°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications
might differ slightly.
✎ Certain restrictions and exclusions apply. Contact technical support for details.
Maintenance and Service Guide
6–3
Specifications
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
specifications
Applicable disc
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI,
CD-TEXT, CD-ROM, CD-ROM
XA, MIXED MODE CD, CD-I,
CD-I Bridge (Photo-CD, Video
CD), Multisession CD
(Photo-CD, CD-EXTRA,
Portfolio, CD-R, CD-RW),
CD-R, CD-RW, DVD-ROM
(DVD-5, DVD-9, DVD-10,
DVD-18), DVD-R, DVD-RW,
DVD+R, DVD+RW,
DVD-system memory
CD-R and CD-RW
Access time
CD
DVD
Random
< 175 ms
< 230 ms
Cache buffer
2 MB
DVD+R, DVD+RW, DVD-R,
DVD-RW, DVD-system memory
Data transfer rate
6–4
24X CD-ROM
3,600 KB/sec
8X DVD
10,800 KB/sec
24X CD-R
3,600 KB/sec
16X CD-RW
2,400 KB/sec
8X DVD+R
10,800 KB/sec
4X DVD+RW
5,400 KB/sec
8X DVD-R
10,800 KB/sec
4X DVD-RW
5,400 KB/sec
2.4X DVD+R(9)
2,700 KB/sec
5X DVD-system memory
6,750 KB/sec
Maintenance and Service Guide
Specifications
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive
specifications
Applicable disc
Read:
Write:
BD-ROM, BD-ROM-DL, BD-R,
BD-R-DL, BD-RE, BD-RE-DL,
DVD-ROM, DVD+R,
DVD+R-DL, DVD+RW, DVD-R,
DVD-R-DL, DVD-RW,
DVD-system memory (Ver.2),
CD-DA, CD-ROM (Mode 1 and
mode 2), CD-ROM XA (Mode
2, form 1 and form 2), Photo
CD (Single and multiple
sessions), CD Extra, CD-R,
CD-RW, and CD-TEXT
DVD-system memory (Ver.2),
DVD+R, DVD-R, CD-R, and
CD-RW
Access time
BD
DVD
Random
< 230 ms
< 180 ms
Cache buffer
4.5 MB
Data transfer rate
2X BD-system memory
9 MB/sec
8X DVD
2,400 KB/sec
16X CD-R
2,400 KB/sec
16X CD-RW
2,400 KB/sec
System DMA specifications
Hardware DMA
System function
DMA4
Direct memory access controller
Maintenance and Service Guide
6–5
Specifications
System interrupt specifications
Hardware IRQ
System function
IRQ0
System Timer
IRQ1
Standard 101/102-Key or Microsoft natural PS/2 Keyboard with HP QLB
IRQ8
System CMOS/real time clock
IRQ10
Intel 5 Series/3400 Series Chipset Family SMBus Controller - 3B30
IRQ12
Synaptics PS/2 Port TouchPad
IRQ13
Numeric data processor
IRQ16
Intel 5 Series/3400 Series Chipset Family USB Enhanced Host Controller 3B3C
IRQ16
Broadcom 802.11g Network Adapter
IRQ16
Intel 5 Series/3400 Series Chipset Family PCI Express Root Port 2 - 3B44
IRQ16
Intel Management Engine Interface
IRQ17
Realtek PCIe FE Family Controller
IRQ17
Intel 5 Series/3400 Series Chipset Family PCI Express Root Port 1 - 3B42
IRQ19
Intel Turbo Boost Technology Driver
IRQ19
Intel PCHM SATA AHCI Controller 4 Port
IRQ21
Intel 5 Series/3400 Series Chipset Family USB Enhanced Host Controller 3B34
IRQ22
High Definition Audio Controller
IRQ81- IRQ190
Microsoft ACPI-Compliant System
IRQ4294967294
Intel Graphics Media Accelerator HB
System I/O address specifications
I/O address (hex)
System function (shipping configuration)
0x00000020-0x00000032
Programmable interrupt controller
0x00000024-0x00000025
Programmable interrupt controller
0x00000028-0x00000029
Programmable interrupt controller
0x0000002C-0x0000002D
Programmable interrupt controller
0x00000030-0x00000031
Programmable interrupt controller
0x00000034-0x00000035
Programmable interrupt controller
0x00000038-0x00000039
Programmable interrupt controller
0x0000003C-0x0000003D
Programmable interrupt controller
0x000000A0-0x000000A1
Programmable interrupt controller
0x000000A4-0x000000A5
Programmable interrupt controller
0x000000A8-0x000000A9
Programmable interrupt controller
0x000000AC-0x000000AD
Programmable interrupt controller
0x000000B0-0x000000B1
Programmable interrupt controller
(Continued)
6–6
Maintenance and Service Guide
Specifications
I/O address (hex)
System function (shipping configuration)
0x000000B4-0x000000B5
Programmable interrupt controller
0x000000B8-0x000000B9
Programmable interrupt controller
0x000000BC-0x000000BD
Programmable interrupt controller
0x000004D0-0x000004D1
Programmable interrupt controller
0x00000040-0x00000043
System Timer
0x00000050-0x00000053
System Timer
0x00002000-0x000020FF
Realtek PCIe FE Family Controller
0x00002000-0x000020FF
Intel 5 Series/3400 Series Chipset Family PCI Express Root Port 2 - 3B44
0x00000000-0x0000001F
Direct memory access controller
0x00000000-0x0000001F
PCI bus
0x00000081-0x00000091
Direct memory access controller
0x00000093-0x0000009F
Direct memory access controller
0x000000C0-0x000000DF
Direct memory access controller
0x00003000-0x00003FFF
Intel Series/3400 Series Chipset Family PCI Express Root Port 1 - 3B42
0x00000060-0x00000060
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard with HP QLB
0x00000064-0x00000064
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard with HP QLB
0x00000D00-0x0000FFFF
PCI bus
0x00000070-0x00000077
System CMOS/real time clock
0x00000070-0x00000077
Motherboard resources
0x0000002E-0x0000002F
Motherboard resources
0x0000004E-0x0000004F
Motherboard resources
0x00000061-0x00000061
Motherboard resources
0x00000063-0x00000063
Motherboard resources
0x00000065-0x00000065
Motherboard resources
0x00000067-0x00000067
Motherboard resources
0x00000080-0x00000080
Motherboard resources
0x00000092-0x00000092
Motherboard resources
0x000000B2-0x000000B3
Motherboard resources
0x00000680-0x0000069F
Motherboard resources
0x00000800-0x0000080F
Motherboard resources
0x0000FFFF-0x0000FFFF
Motherboard resources
0x0000FFFF-0x0000FFFF
Motherboard resources
0x00000400-0x0000047F
Motherboard resources
0x00000500-0x0000057F
Motherboard resources
0x0000464E-0x0000164F
Motherboard resources
0x00000380-0x0000038E
Motherboard resources
0x000000F0-0x000000F0
Numeric data processor
0x00004050-0x00004057
Intel Graphics Media Accelerator HD
(Continued)
Maintenance and Service Guide
6–7
Specifications
I/O address (hex)
System function (shipping configuration)
0x000003B0-0x000003BB
Intel Graphics Media Accelerator HD
0x000003C0-0x000003DF
Intel Graphics Media Accelerator HD
0x00000062-0x00000062
Microsoft ACPI-Compliant Embedded Controller
0x00000066-0x00000066
Microsoft ACPI Compliant Embedded Controller
0x00004048-0x0000404F
Intel PCHM SATA AHCI Controller 4 Port
0x0000405C-0x0000405F
Intel PCHM SATA AHCI Controller 4 Port
0x00004040-0x00004047
Intel PCHM SATA AHCI Controller 4 Port
0x00004058-0x0000405B
Intel PCHM SATA AHCI Controller 4 Port
0x00004020-0x0000403F
Intel PCHM SATA AHCI Controller 4 Port
0x00004000-0x0000401F
Intel 5 Series/3400 Series Chipset Family SMBus Controller - 3B30
System memory map specifications
Memory address
System function
0x54404000-0x54404FFF
Intel Turbo Boost Technology Driver
0x54405800-0x54405BFF
Intel 5 Series/3400 Series Chipset Family USB Enhanced Host Controller 3B34
0xFF000000-0xFFFFFFFF
Intel 82802 Firmware Hub Device
0xFF000000-0xFFFFFFFF
Motherboard resources
0x54405C00-0x54405FFF
Intel Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C
0x51410000-0x51410FFF
Realtek PCIe FE Family Controller
0x51400000-0x5140FFFF
Realtek PCIe FE Family Controller
0x51400000-0x5140FFFF
Intel 5 Series/3400 Series Chipset Family PCI Express Root Port 2 - 3B44
0xFED00000-0xFED003FF
High precision event timer
0x53400000-0x543FFFFF
Intel 5 Series/3400 Series Chipset Family PCI Express Root Port 1 - 3B42
0x53400000-0x543FFFFF
Broadcom 802.11g Network Adapter
0x50400000-0x513FFFFF
Intel 5 Series/3400 Series Chipset Family PCI Express Root Port 1 - 3B42
0xA0000-0xBFFFF
PCI bus
0xA0000-0xBFFFF
Intel Graphics Media Accelerator HD
0x3C000000-0xFEAFFFFF
PCI bus
0x3C000000-0xFEAFFFFF
Motherboard resources
0x52400000-0x533FFFFF
Intel 5 Series/3400 Series Chipset Family PCI Express Root Port 2- 3B44
0xFED1C000-0xFED1FFFF
Motherboard resources
0xFED10000-0xFED13FFF
Motherboard resources
0xFED18000-0xFED18FFF
Motherboard resources
0xFED19000-0xFED19FFF
Motherboard resources
0xE0000000-0xEFFFFFFF
Motherboard resources
0xFED20000-0xFED3FFFF
Motherboard resources
(Continued)
6–8
Maintenance and Service Guide
Specifications
Memory address
System function
0xFED45000-0xFED8FFFF
Motherboard resources
0xFEE00000-0xFEEFFFFF
Motherboard resources
0x54400000-0x54403FFF
High Definition Audio Controller
0x50000000-0x503FFFFF
Intel Graphics Media Accelerator HD
0x40000000-0x4FFFFFFF
Intel Graphics Media Accelerator HD
0x54405000-0x544057FF
Intel PCHM SATA AHCI Controller 4 Port
0x54406100-0x5440610F
Intel Management Engine Interface
0x54406000-0x544060FF
Intel 5 Series/3400 Series Chipset Family SMBus Controller - 3B30
Maintenance and Service Guide
6–9
Specifications
6–10
Maintenance and Service Guide
7
Backup and recovery
Recovery after a system failure is as complete as your most current backup. HP recommends creating recovery
discs immediately after software setup. As you add new software and data files, continue to back up your system on
a regular basis to maintain a reasonably current backup.
Tools provided by the operating system and HP Recovery Manager software are designed to help you with the
following tasks for safeguarding your information and restoring it in case of a system failure:
■
Creating a set of recovery discs (Recovery Manager software feature). Recovery discs are used to start up
(boot) the computer and restore the operating system and software programs to factory settings in case of
system failure or instability.
■
Backing up your information regularly to protect your important system files.
■
Creating system restore points (operating system feature). System restore points allow you to reverse
undesirable changes to the computer by restoring the computer to an earlier state.
■
Recovering a program or driver (Recovery Manager software feature). This feature helps you reinstall a
program or driver without performing a full system recovery.
■
Performing a full system recovery (Recovery Manager software feature). With Recovery Manager, you can
recover your full factory image if you experience system failure or instability. Recovery Manager works from a
dedicated recovery partition (select models only) on the hard drive or from recovery discs you create.
computer includes a solid-state drive (SSD), you might not have a recovery partition. Recovery discs have
✎ Ifbeentheincluded
for computers that do not have a partition. Use these discs to recover your operating system and
software. To check for the presence of a recovery partition, select Start > Computer. If the partition is present,
an HP Recovery drive is listed in the Hard Disk Drives section of the window.
Creating recovery discs
HP recommends creating recovery discs to be sure that you can restore your system to its original factory state if
you experience serious system failure or instability. Create these discs after setting up the computer for the first
time.
Handle these discs carefully and keep them in a safe place. The software allows the creation of only one set of
recovery discs.
the computer does not include an internal optical drive, use an optional external optical drive (purchased
✎ Ifseparately)
to create recovery discs, or purchase recovery discs for the computer from the HP website.
Note the following guidelines before creating recovery discs:
■
Use high-quality DVD-R, double-layer DVD-R, DVD+R, double-layer DVD+R, BD-R (writable Blu-ray), or
CD-R discs. All these discs are purchased separately. DVDs and BDs have a much higher capacity than CDs. If
you use CDs, up to 20 discs might be required, whereas only a few DVDs or BDs are required.
Read-write discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE (rewritable Blu-ray) discs,
✎ are
not compatible with the Recovery Manager software.
■
The computer must be connected to AC power during this process.
■
Only one set of recovery discs can be created per computer.
Maintenance and Service Guide
7–1
Backup and recovery
■
Number each disc before inserting it into the optical drive.
■
If necessary, exit the program before you have finished creating the recovery discs. The next time you open
Recovery Manager, you are prompted to continue the disc creation process.
To create a set of recovery discs:
1. Select Start > All Programs > Recovery Manager > Recovery Manager.
Recovery Manager opens.
2. Click Advanced Options.
operating the computer on battery power, you are prompted to connect to AC power before you can go to
✎ Iftheyounextarestep.
3. Click Recovery disc creation, and then click Next.
4. Follow the on-screen instructions.
When to back up
■
On a regularly scheduled basis
✎ Set reminders to back up your information periodically.
■
Before the computer is repaired or restored
■
Before you add or modify hardware or software
Backup suggestions
■
Create a set of recovery discs using Recovery Manager.
■
Create system restore points using the Windows System Restore feature, and periodically copy them to disc.
■
Store personal files in the Documents folder and back up this folder periodically.
■
Back up templates stored in their associated programs.
■
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings. The
screen shot can be a time-saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document:
a. Display the screen.
b. Copy the screen:
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c. Open a word-processing document, and then select Edit > Paste.
7–2
Maintenance and Service Guide
Backup and recovery
Using system restore points
When backing up your system, you are creating a system restore point. A system restore point allows you to save
and name a snapshot of your hard drive at a specific point in time. Recover back to that point if you want to reverse
subsequent changes made to your system.
to an earlier restore point does not affect data files saved or e-mails created since the last
✎ Recovering
restore point.
Create additional restore points to provide increased protection for your system files and settings.
When to create restore points
■
Before adding or extensively modifing software or hardware
■
Periodically, whenever the system is performing optimally
✎ If you revert to a restore point and then change your mind, reverse the restoration.
To create a system restore point
1. Select Start > Control Panel > System and Maintenance > System.
2. In the left pane, click System Protection.
3. Click the System Protection tab.
4. Under Automatic restore points, select the disk for which you want to create a restore point.
5. Click Create.
The System Protection window opens.
6. Follow the on-screen instructions.
Restore to a previous date and time
To revert to a restore point (created at a previous date and time), when the computer was functioning optimally:
1. Select Start > Control Panel > System and Maintenance > System.
2. In the left pane, click System protection.
3. Click the System Protection tab.
4. Click the System Restore button, and then click Next.
The System Restore window opens.
5. Follow the on-screen instructions.
Maintenance and Service Guide
7–3
Backup and recovery
Performing a recovery
can recover only files that you have previously backed up. HP recommends using Recovery Manager to
✎ You
create an entire drive backup as soon as you set up the computer.
Recovery Manager software allows you to repair or restore the system if you experience system failure or
instability. Recovery Manager works from recovery discs or from a dedicated recovery partition (select models
only) on the hard drive. However, if the computer includes a solid-state drive (SSD), you might not have a recovery
partition. If that is the case, recovery discs have been included with the computer. Use these discs to recover your
operating system and software.
has its own built-in repair features, such as System Restore and driver roll-back capabilities. Try these
✎ Windows
features before using Recovery Manager.
Manager recovers only software that was preinstalled at the factory. Software not provided with this
✎ Recovery
computer must be downloaded from the manufacturer's website or reinstalled from the disc provided by the
manufacturer.
Recovering from the recovery discs
To restore the system from the recovery discs:
1. Back up all personal files.
2. Insert the first recovery disc into the optical drive and restart the computer.
3. Follow the on-screen instructions.
Recovering from the dedicated recovery partition (select models only)
computer includes a solid-state drive (SSD), you might not have a recovery partition. Recovery discs have
✎ Ifbeentheincluded
for computers that do not have a partition. Use these discs to recover your operating system and
software. To check for the presence of a recovery partition, select Start > Computer. If the partition is present,
an HP Recovery drive is listed in the Hard Disk Drives section of the window.
On some models, you can perform a recovery from the partition on the hard drive from either the Start button or the
f11key. This restores the computer to its factory condition.
To restore the system from the partition:
1. Access Recovery Manager in either of the following ways:
❏ Select Start > All Programs > Recovery Manager > Recovery Manager.
– or –
❏ Restart the computer and press the f11 key while the Press <F11> for recovery message appears on the
screen. Then select Recovery Manager.
Recovery Manager opens.
2. Click Advanced Options.
3. Click System recovery, and then click Next.
4. Follow the on-screen instructions.
7–4
Maintenance and Service Guide
8
Connector pin assignments
Audio-in (microphone)
Pin
Signal
1
Audio signal in
2
Audio signal in
3
Ground
Audio-out (headphone)
Pin
Signal
1
Audio out, left channel
2
Audio out, right channel
3
Ground
Maintenance and Service Guide
8–1
Connector pin assignments
External monitor
8–2
Pin
Signal
1
Red analog
2
Green analog
3
Blue analog
4
Not connected
5
Ground
6
Ground analog
7
Ground analog
8
Ground analog
9
+5 VDC
10
Ground
11
Monitor detect
12
DDC 2B data
13
Horizontal sync
14
Vertical sync
15
DDC 2B clock
Maintenance and Service Guide
Connector pin assignments
HDMI
Pin
Signal
1
Transition minimized differential signal (TDMS) data 2+
2
Transition minimized differential signal (TDMS) data 2 shield
3
Transition minimized differential signal (TDMS) data 2-
4
Transition minimized differential signal (TDMS) data 1+
5
Transition minimized differential signal (TDMS) data 1 shield
6
Transition minimized differential signal (TDMS) data 1 shield
7
Transition minimized differential signal (TDMS) data 0+
8
Transition minimized differential signal (TDMS) data 0 shield
9
Transition minimized differential signal (TDMS) data 0-
10
Transition minimized differential signal (TDMS) Clock +
11
Transition minimized differential signal (TDMS) data clock shield
12
Transition minimized differential signal (TDMS) data clock-
13
Consumer electronics control (CEC)
14
Not connected
15
Display data channel (DDC) clock
16
Display data channel (DDC) data
17
Ground
18
+5V Power
19
Hot plug detect
Maintenance and Service Guide
8–3
Connector pin assignments
RJ-11 (modem)
Pin
Signal
1
Unused
2
Tip
3
Ring
4
Unused
5
Unused
6
Unused
RJ-45 (network)
8–4
Pin
Signal
1
Transmit +
2
Transmit -
3
Receive +
4
Unused
5
Unused
6
Receive -
7
Unused
8
Unused
Maintenance and Service Guide
Connector pin assignments
Universal Serial Bus
Pin
Signal
1
+5 VDC
2
Data -
3
Data +
4
Ground
Maintenance and Service Guide
8–5
Connector pin assignments
8–6
Maintenance and Service Guide
9
Power cord set requirements
The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC
or from 220 to 240 volts AC.
The 3-conductor power cord set included with the computer meets the requirements for use in the country or region
where the equipment is purchased.
Power cord sets for use in other countries and regions must meet the requirements of the country or region where
the computer is used.
Requirements for all countries and regions
The requirements listed below are applicable to all countries and regions:
■
The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
■
All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the
country or region where the power cord set will be used.
■
The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage rating of 125 or
250 VAC, as required by the power system of each country or region.
■
The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C13
connector for mating with the appliance inlet on the back of the computer.
Maintenance and Service Guide
9–1
Power cord set requirements
Requirements for specific countries and regions
Country/region
Accredited agency
Applicable note number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
The Netherlands
KEMA
1
Norway
NEMKO
1
The People's Republic of China
CCC
5
South Korea
EK
4
Sweden
SEMKO
1
Switzerland
SEV
1
Taiwan
BSMI
4
The United Kingdom
BSI
1
The United States
UL
2
1. The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler and wall
plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole grounding type
with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese
Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall plug must be a
two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
4. The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler and wall
plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
5. The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler and wall
plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
9–2
Maintenance and Service Guide
10
Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general household waste.
Follow the local laws and regulations in your area for computer battery disposal.
Display
Å
WARNING: The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging
this component and causing exposure to the mercury.
Ä
CAUTION: The procedures in this chapter can result in damage to display components. The only components intended for
recycling purposes are the liquid crystal display (LCD) panel and the backlight. When you remove these components, handle
them carefully.
Disposal. This product contains mercury in the backlight in the display assembly that might require
✎ Materials
special handling at end-of-life. Disposal of mercury might be regulated because of environmental considerations.
For disposal or recycling information, contact your local authorities, or see the Electronic Industries Alliance
(EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must be
disassembled to gain access to the backlight 1 and the liquid crystal display (LCD) panel 2.
procedures provided in this chapter are general disassembly instructions. Specific details, such as screw
✎ The
sizes, quantities, and locations, and component shapes and sizes, can vary from one computer model to another.
Maintenance and Service Guide
10–1
Recycling
Perform the following steps to disassemble the display assembly:
1. Remove all screw covers 1 and screws 2 that secure the display bezel to the display assembly.
2. Lift up and out on the left and right inside edges 1 and the top and bottom inside edges 2 of the display bezel
until the bezel disengages from the display assembly.
3. Remove the display bezel 3.
10–2
Maintenance and Service Guide
Recycling
4. Remove the two screws 1 that secure each hinge to the display enclosure and lift up to remove the display
hinge covers 2.
5. Remove all screws 1 that secure the display panel assembly to the display enclosure.
6. Remove the display panel assembly 2 from the display enclosure.
7. Turn the display panel assembly upside down.
8. Remove all screws that secure the display panel frame to the display panel.
Maintenance and Service Guide
10–3
Recycling
9. Use a sharp-edged tool to cut the tape 1 that secures the sides of the display panel to the display panel frame.
10. Remove the display panel frame 2 from the display panel. Remove the screws 1 that secure the backlight
cover to the display panel.
11. Lift the top edge of the backlight cover 2 and swing it outward.
12. Remove the backlight cover.
13. Turn the display panel right-side up.
14. Remove the backlight cables 1 from the clip 2 in the display panel.
10–4
Maintenance and Service Guide
Recycling
15. Turn the display panel upside down.
16. Remove the backlight frame from the display panel.
Å
WARNING: The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging
this component and causing exposure to the mercury.
17. Remove the backlight from the backlight frame.
Maintenance and Service Guide
10–5
Recycling
18. Disconnect the display cable 1 from the LCD panel.
19. Remove the screws 2 that secure the LCD panel to the display rear panel.
20. Release the LCD panel 3 from the display rear panel.
21. Release the tape 4 that secures the LCD panel to the display rear panel.
22. Remove the LCD panel.
23. Recycle the LCD panel and backlight.
10–6
Maintenance and Service Guide
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement