Rain Bird T-Bird T-40 Installation Instructions Manual
Add to My manuals6 Pages
Rain Bird T-Bird T-40 is a versatile sprinkler nozzle turret designed for precise irrigation control. Install it on compatible Rain Bird sprinklers to customize watering patterns and enhance irrigation efficiency. Easily adjust the left trip point and arc to suit your landscaping needs. The T-Bird T-40 offers flexible irrigation solutions for various applications, from small gardens to large landscapes.
advertisement
INSTALLATION INSTRUCTIONS
Install T-22, T-30, or T-40 nozzle turrets
1
If turret is already installed, go to step 2.
Remove debris cover and insert nozzle turret into body.
Rotate turret clockwise until threads connect.
Pull up turret, grip textured band, and tighten turret.
1
2
Install nozzles in T-40 turret.
If nozzle is already in turret, pry nozzle retainer up with screwdriver.
Push old nozzle out with screwdriver.
Snap in new nozzle and retainer.
2
3
Flush circuit.
Flushing through the lines prior to installation is recommended! DO NOT flush with debris cover on.
If you do not flush through the lines, install nozzle turrets and remove internals from head(s) furthest from valve.
Typical Circuits
To remove internals, unscrew cap and pull out assembly.
Flush circuit, clear debris, and reinstall internals.
3
4
Set left trip point.
Be sure water is turned OFF before setting
FIXED left trip point.
Pull up turret and turn it to the left trip point. Caution:
If rotor does not turn easily to the left, first turn it right to right trip point. Then turn left to left trip point.
Left trip point is marked by screw next to nozzle retainer. To change left trip point, unscrew cap and pull out assembly. Rotate internals to realign left trip point to desired position and reinstall in this position. Screw on cap. For bottom inlet installations, rotate case on riser to desired position.
4
5
Adjust Arc
Pull down vandal collar.
Arc is pre-set to 180 o
.
To add arc, while sprinkler is turning left, turn turret to left trip point. Push down on turret and turn clockwise.
Subtract arc
180 o
Add arc
5
To reduce arc, while sprinkler is turning right, turn turret to right trip point. Push down on turret and turn counterclockwise.
Move vandal collar back into slot.
Sprinkler rotation
Always turn head in the same direction the sprinkler is rotating. Turning the head against the sprinkler's rotation may damage the sprinkler.
Rain Bird Sales, Inc. Customer Support Center
6640 S. Bonney Ave. Tucson, AZ 85706 1-800-RAIN-BIRD (520) 434-6289 FAX
6
advertisement