KINWELL HG8911 Modern 9 Light Black and Brown Finish Chandelier User manual
KINWELL BSC-GS017-DBN is a versatile and feature-rich device that can help you improve your home security and simplify your daily routine. With its built-in camera, motion detection, and two-way audio, you can keep an eye on your property and communicate with visitors from anywhere using the app on your smartphone. The device also features a built-in siren that can be triggered remotely to deter intruders. Additionally, the KINWELL BSC-GS017-DBN can be used to control other smart devices in your home, such as lights and thermostats, making it a central hub for your smart home ecosystem.
Advertisement
Advertisement
CANOPY INSTALLATION INSTRUCTIONS
WIRE CONNECTION DIAGRAM
Wires meet safety standards are recommended to
connect the supply circuit.
CAUTION: Risk of fire
USER MANUAL FOR MODEL#
HG8911
Light Bulb :E12 light:E12*9
( Rated 110-130V/60Hz,bulb 60W maximum.)
Light Bulb
CANOPY INSTALLATION INSTRUCTIONS
Please read all instructions carefully.Before you proceed to install,make sure that the power supply is turned off and remainsoff until installation is complete.
Please not that each part has been assigned a letter.
Please proceed in an alphabetical order.
A. Existing Electrical Box B. Crossbar
C. Crossbar Screws D.Canopy Loop
E. Canopy F. Canopy Loop Nut lock
G. Chain H. Ground Wire
I. Loop J. Wire
K. Junction Caps
Attach the Crossbar(B) to the existing electrical box(A) using the two crossbar screws
(C) which are not supplied and should already be in your box.
Slide the canopy loop nut lock(F) back up over the canopy loop(D),pass the canopy loop(D) through canopy(E),connect with the threaded pipe underside of the crossbar.
Pass the main wire(J) and ground wire(H) through the loop(I),the chain(G),the canopy loop nut lock(F),the canopy(E),the canopy loop
(D) and the crossbar(B) until the end of the main wire(J) reaches the electrical box(A) where you can make the appropriate connections.
Be sure when connecting the wire use electrician approved junction caps(K).Stow the excess wire in the electrical box(A).Raise the canopy(E) and canopy loop nut lock(F),attach canopy(E) to ceiling,slide canopy loop nut lock(F) over canopy loop(D) and hold the canopy(E).
Buckle is used to connect the chain and loop or adjust the length of chain.
E12
1
Please note: The parts in this table are completely unassembled, for illustrative purpose. In the actual product that you receive, some parts are assembled and attached together.
2
3
4
NO.
1
5
6
Products list
Picture Quantity
1 PCS
1 PCS
4 PCS
1 PCS
83 PCS
83 PCS
2
Assembly and Installation Steps
1: Used two screws lock on the ceiling tightly to fix the light.
2:Lock together.
4:The lamp body with samall chains on the chassis.
5: Install the bulb.
6:The steps of hanging crystals.
Product Size
5.1"
15"
19.3"
24"
3

Public link updated
The public link to your chat has been updated.
Advertisement