advertisement
O
WNER
’
S
M
ANUAL
MDV530VR
Digital Video Disc Player & Video Cassette Recorder
N
EED
H
ELP
? C
ALL US
!
M
AGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH ANY QUESTIONS
ABOUT YOUR NEW PRODUCT
. W
E CAN GUIDE YOU THROUGH
C
ONNECTIONS
,
F
IRST
-
TIME
S
ETUP
,
AND ANY OF THE
F
EATURES
.
W
E WANT YOU TO START ENJOYING YOUR NEW PRODUCT RIGHT AWAY
.
C
ALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT
.
1-800-705-2000
O
R VISIT US ON THE WEB AT WWW
.
MAGNAVOX
.
COM
I MPORTANT !
R
ETURN YOUR
W
ARRANTY
R
EGISTRATION
C
ARD WITHIN
10
DAYS
.
S
EE WHY INSIDE
.
Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to.
Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Warranty
Verification
Owner
Confirmation
Model
Registration
Registering your product within
10 days confirms your right to maximum protection under the terms and conditions of your
MAGNAVOX warranty.
Your completed Warranty
Registration Card serves as verification of ownership in the event of product theft or loss.
Returning your Warranty
Registration Card right away guarantees you’ll receive all the information and special offers which you qualify for as the owner of your model.
Know these
safety
symbols
Congratulations on your purchase, and welcome to the “family!”
Dear MAGNAVOX product owner:
Thank you for your confidence in MAGNAVOX. You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.
As a member of the MAGNAVOX “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome-and thanks for investing in a MAGNAVOX product.
P.S. Remember, to get the most from your
MAGNAVOX product, you must return your
Warranty Registration Card within 10 days. So please mail it to us right now!
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
WARNING: TO PREVENT
FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR
MOISTURE.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
For Customer Use
Enter below the Serial No.
which is located on the rear of the cabinet. Retain this information for future reference.
Model No.________________
Serial No. ________________
Visit our World Wide Web Site at http://www.magnavox.com
Safety and General Information 3
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this equipment void the user’s authority to operate it.
Department of Health and Human Services (DHHS) Certification: Complies with
2 1 Center for Radiation (CFR) chapter 1 subchapter J applicable at time of manufacture.
Laser Safety:
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCE-
DURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTER-
LOCK DEFEATED. DO NOT STARE INTO BEAM. THE BEAM IS LOCATED INSIDE,
NEAR THE DECK MECHANISM.
Special Information for Canadian Users:
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio/TV Interference:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and the receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Copyright Protection:
Unauthorized copying, broadcasting, public performance and lending of Discs are prohibited. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Note to the Cable TV System Installer:
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.
Declaration of Conformity
Model Number:
Trade Name:
MDV530VR
Magnavox
Responsible Party: Philips Consumer Electronics
P.O. Box 14810
Knoxville, TN 379 14-1810
(865) 52 1-4316
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
Copyright 2003 Magnavox. All rights reserved.
4 Table of Contents
General Information
Safety and General Information . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Playable Discs and Video Cassettes . . . . . . . . . . . . .6
Additional VCR Features
Multi-Channel Television Sound . . . . . . . . . . . . .45-46
Hi-Fi Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Initial DVD/VCR Setup
Hookups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .715
Remote Control Setup . . . . . . . . . . . . . . . . . . . . . .
16
First-time DVD/VCR Setup . . . . . . . . . . . . . . . . . . .
17
Basic Playback
Video Cassette Playback . . . . . . . . . . . . . . . . . . . . .
18
Disc Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
Basic DVD/VCR Controls
Display Panel (DVD) . . . . . . . . . . . . . . . . . . . . . . . .20
Display Panel (VCR) . . . . . . . . . . . . . . . . . . . . . . . .2
1
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .24-25
Disc Playback Features
DVD Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . .48
Fast Forward/Reverse Search . . . . . . . . . . . . . . . . .49
Title/Chapter Playback, Specific Time Playback . . . .50
Track Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
1
Paused and Step-by-Step Playback, Resume . . . . . .52
Repeat, A-B Repeat . . . . . . . . . . . . . . . . . . . . . . . . .53
Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Subtitles, Camera Angles . . . . . . . . . . . . . . . . . . . . .55
Parental Controls Password . . . . . . . . . . . . . . . . . .56
Parental Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Audio Language, Stereo Sound Mode . . . . . . . . . . .58
DVD Slow Motion, Zoom . . . . . . . . . . . . . . . . . . . .59
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . .60
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . .6
1
MP3/JPEG Playback . . . . . . . . . . . . . . . . . . . . . . . . .62
MP3/JPEG Displays . . . . . . . . . . . . . . . . . . . . . . . . .63
Additional VCR Setup
Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . .26-27
Clock (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-29
Language (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
VCR Status Displays . . . . . . . . . . . . . . . . . . . . . . . .3
1
DVD Player Setup Options
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64-65
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66-67
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
On-Screen Displays . . . . . . . . . . . . . . . . . . . . . . . . .69
Black Level, Virtual Surround . . . . . . . . . . . . . . . . .70
VCR Recording Options
Videotape Recording . . . . . . . . . . . . . . . . . . . . . . . .32
Recording One Channel/Watching Another . . . . . .33
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . .34
Rerecording (Tape Duplication) . . . . . . . . . . . . . . .35
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . .36-38
DVD to Videotape Duplication . . . . . . . . . . . . . . . .39
Information You May Need
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . .7
1
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . .74-77
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . .78-79
Information Index . . . . . . . . . . . . . . . . . . . . . . . . . .80
Video Cassette Playing Options
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Tape Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1
Time Search, Index Search . . . . . . . . . . . . . . . . . . .42
Special Effects Playback . . . . . . . . . . . . . . . . . . . . . .43
Automatic Operation Features . . . . . . . . . . . . . . . .44
Introduction 5
Welcome!
This DVD/VCR combines a Digital Video Disc (DVD) Player and a Hi-Fi Video Cassette
Recorder (VCR) into one unit, letting you play DVDs, Audio Compact Discs (Audio
CDs), and Video Cassettes on one piece of equipment.
Read this owner’s manual carefully to learn how to use the features listed below.
VCR Features
• Automatic Head Cleaner
• Channel Setup
• English, French, and Spanish menus and displays
• Multi-Channel TV Sound
• 19 Micron head
• Recording: One-Touch and Timer
• Repeat Play
• Searching: Time, Index, Forward, and
Reverse
• Slow Motion
• Still Picture
• Tape Counter
• Tracking Adjustment
Disc Features
• Audio Language choices*
• Bit Rate display
• Camera Angle *
• Dolby Digital Sound*
• DVD to Videotape Duplication
• Dynamic Range Control
• Fast/Paused/Slow/Step-by-Step Playback
• Markers
• Parental Controls*
• Program Playback
• Random Playback
• Repeat, Repeat A-B
• Screen Saver
• Search (Title/Chapter, Time, Track)
• Subtitles*
• Virtual Surround
• Zoom
* If available on the DVD
Package Contents
The following items are provided with your new DVD/VCR.
• Remote Control and two AA batteries
• One black RF coaxial cable, 75 ohm
• One set of Audio (red and white tips) and Video (yellow tips) cables
DVD Disc Menus...
Some explanations in this manual describe DVD Disc menus. DVD manufacturers set the menus, which vary among DVDs. Not all DVDs have menus. If the DVD has a menu, access it by pressing DVD, then DISC/MENU on the remote control.
Details are on page 48.
DVD Player Setup Menu...
Some instructions explain how to use the DVD Player’s Setup menu to set up features of the DVD Player or a DVD. Access the DVD Player menu by pressing SETUP on the remote control when playback is stopped. Even if a feature is set in the DVD
Player’s menu, it may not be available if the current DVD does not include that feature.
Available Disc Features...
All features described in this manual are not available on every Disc. If the feature is not available on the Disc, you cannot use the DVD/VCR to make it available. An “X” will appear in the top right corner of the
TV screen if you try to access a feature that is not currently available.
6 Playable Discs and Video Cassettes
Playable Discs
The DVD Player will play Digital Video Discs (DVDs); Audio Compact Discs (CDs); finalized Digital Video Discs Rewritable (DVD+RW); and finalized Compact Discs Rewritable
(CD-RW) and Compact Discs Recordable (CD-R).
To play a DVD, make sure it meets the requirements for Region Codes and Color
Systems as described below. Discs that have the following logos will play on the DVD
Player. Other Disc types are not guaranteed to play in the DVD/VCR.
DVD Audio CD
Recordable
ReWritable
CD-RW/CD-R DVD+RW
Region Codes
This DVD/VCR has a Region One ( 1) DVD Player. DVDs must be labeled for ALL regions or for Region 1 in order to play on the DVD Player. You cannot play DVDs that are labeled for other regions. Look for the symbols below on your DVDs. If these region symbols do not appear on your DVD, you cannot play the DVD in this DVD Player.
The number inside the globe refers to a region of the world. Region 1 represents the
United States, Canada, upper regions of North America, Bermuda, the U.S. Virgin
Islands, and small regions near Australia.
A DVD labelled for a specific region can only play on DVD Players with the same region code.
Color Systems
DVDs are recorded in different color systems throughout the world. The most common color systems are NTSC (which is used primarily in the United States and
North America), PAL, and SECAM.
This DVD Player uses NTSC, so DVDs you play must be recorded in the NTSC system. You cannot play DVDs recorded in other formats. The color system of the
DVD may be listed on the DVD or on the Disc case.
Playable Video Cassettes
The VCR of this DVD/VCR has a High Quality (HQ) system and is compatible with existing Video Home System (VHS) equipment. Use only video cassettes that have the mark. The use of other tapes may result in poor picture quality and excessive deposits on the video heads, which may not be covered by the warranty if damage occurs.
The VCR also has a 19 micron head, which provides a better picture when you view tapes recorded in slow speed (SLP).
Hookups 7
Determining the best possible connection...
Your hookup will be determined primarily by your existing equipment, especially your TV. However, the following guidelines describe which options have the best picture (video) and sound (audio) quality. You will not use all the jacks on the DVD/VCR.
If your TV only has an RF-style jack, usually labelled Antenna In, RF In, or 75 ohm, use the ANT-
OUT jack of the DVD/VCR to connect to the TV. This hookup provides both audio and video in a single cable. Set your TV to channel 3 or 4 - the output channel of the DVD/VCR. This connection
allows you to use both the DVD and VCR features. Details are on page eight.
★★★★
★★★
★★
If your television has Component Video In jacks (which also could be labelled Y Cr Cb, Y Pr Pb, or YUV and may be green, blue, and red), use the Component Video jacks (Y CR CB) for the best picture quality.
If you use only this video connection, only the DVD picture will be available. To see DVD features on the TV, set the TV to its Component Video In channel. Details are on page 12.
If your TV has an S-Video In jack (which also may be labelled Y/C or S-VHS), use the S-Video jack for excellent picture quality. If you use only this video connection, only the DVD picture will be available. To see DVD features on the TV, set the TV to its S-Video In channel. Details are on page 13.
If your TV has a single yellow Video In jack (which also may be labelled CVBS, Composite, or baseband), use the yellow Video jack for good picture quality. This connection provides a picture for both the DVD Player and the VCR. To see DVD or VCR features on the TV, set the TV to its Video In channel. Details are on page 11.
★★★
★★★★
If you have a Stereo with a Coaxial Digital Audio In jack, this provides the clearest sound for the
DVD Player. Connect the DVD/VCR’s COAXIAL DIGITAL AUDIO OUT jack to your Stereo for the best sound quality. If you use only this audio connection, only Disc sound (no VCR) will be available. Details are on page 15.
If digital audio connections are not possible, connect the DVD/VCR’s red and white DVD/VCR
AUDIO OUT jacks to the Audio In jacks of your Stereo or TV. This connection provides sound for both the DVD Player and the VCR. Details are on pages 11-14.
Before you begin...
● Refer to the manuals of your TV, Cable Box, Stereo, or other devices as necessary. Note the style of jacks
● and connectors on the other equipment. Determine how to choose different Audio and Video In channels on your other equipment so you can see and hear the DVD/VCR material playing on the TV, Stereo, etc.
Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
Remember...
● Set the TV to the correct Video In channel. Such channels may be called AUX or AUXILIARY IN,
●
●
●
AUDIO/VIDEO or A/V IN, EXT 1 or External In, etc. These channels often are located near channel 00. See your TV owner’s manual for details. If you do not see the DVD or VCR playback on the TV, go to the lowest TV channel (0 1 or 02) and change channels downward until you see the DVD or VCR picture on the TV.
Or, if your TV has only a single Antenna In jack and you are using the RF coaxial cable (as described on page eight), set the TV to channel 3 or 4.
To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press DVD to put the DVD/VCR in DVD mode. With no Disc in the Player, a large DVD Video logo will appear on the TV screen when you get the TV on the correct Audio/Video In channel or channel 3 or 4.
Set the Stereo to the correct channel or “source” mode.
Depending on your connection, you may need to purchase additional cables or adaptors.
To use the VCR features, you must include a connection with the supplied yellow video cable and red/white audio cables or with the supplied RF coaxial cable.
Once you determine the best option, find your choice on pages 815. Follow the specific steps for the hookup you choose. After hooking up the DVD/VCR, go to page 17 to complete the first-time setup.
8 Hookups (cont’d)
DVD/VCR to TV only
Simplest connection using only the supplied black RF coaxial cable
This connection will let you use the features of both the VCR and the DVD Player.
1 Antenna or
Cable TV signal
ANT-IN
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
ANT-OUT
VIDEO OUT VIDEO IN
ANT-IN
S-VIDEO
OUT
COMPONENT
VIDEO OUT
DVD
AUDIO
OUT
Y
DIGITAL
AUDIO OUT
L
COAXIAL
R
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
ANT-OUT VIDEO OUT VIDEO IN
75
ANT /
CABLE
2 Black RF coaxial cable
(supplied)
75
Ω
ANT /
CABLE
Antenna In Jack
(on back of TV) example only
1
2
Disconnect the antenna or Cable TV signal from your TV and connect it to the ANT-IN (Antenna In) Jack of your DVD/VCR.
Connect the supplied black RF coaxial cable to the ANT-OUT
(Antenna Out) Jack on the back of the DVD/VCR and to the
ANTENNA IN Jack on the TV. The ANTENNA IN jack on the TV may be labelled TV IN, RF IN, 75
Ω
(ohm), or ANT. IN. See your TV owner’s manual for assistance.
3
4
Plug in the power cords of the TV and the DVD/VCR.
Set your TV to channel 3 or 4. The DVD/VCR’s output channel is 3 when you purchase it. So, set your TV to channel 3 when the DVD/VCR is new.
If you cannot use channel 3 at your TV, you can change the DVD/VCR’s output channel to channel 4. To do so, press the VCR button to put the
DVD/VCR in VCR mode. The green VCR light will be on the front of the
DVD/VCR. Insert a videotape and press PLAY B to start playback.
During playback, press and hold the (VCR) PLAY B button on the
front of the DVD/VCR for three to five seconds. Each time you do this, the DVD/VCR’s output channel switches between 3 and 4. Change your TV to channel 3 or 4 accordingly. (You cannot change the DVD/VCR’s output channel while adjusting tracking manually. Press STOP C to stop play and cancel manual tracking, then press PLAY B to resume play and change the output channel.)
There is not a channel 3/4 switch on the DVD/VCR (as customary with most
VCRs).
5 You are ready to turn on the DVD/VCR. Go to page 17 before turning on the DVD/VCR.
Hookups (cont’d) 9
DVD/VCR to Cable Box or Satellite Receiver and TV
Using only basic RF coaxial cables
This connection will let you use the features of both the VCR and the DVD Player.
Cable
Signal
1
Cable Box/Satellite Receiver
IN
OUT
RF coaxial cable
2
DVD/VCR
ANT-IN
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
ANT-OUT
VIDEO OUT VIDEO IN
75
ANT /
CABLE
S-VIDEO
OUT
COMPONENT
VIDEO OUT
DVD
AUDIO
OUT
Y
DIGITAL
AUDIO OUT
RF coaxial cable
COAXIAL
R C R
3
TV’s ANTENNA
IN Jack
Connections
1
2
Connect a Cable TV or Satellite signal to the IN jack on the Cable Box/Satellite Receiver.
Use an RF coaxial cable (as the one supplied) to connect the OUT Jack on the Cable Box/Satellite
Receiver to the ANT-IN (Antenna In) jack on the
DVD/VCR.
3 Use a second RF coaxial cable to connect the ANT-
OUT (Antenna Out) jack on the DVD/VCR to the
TV’s Antenna In jack.
Remember...
There are two ways to connect your Cable Box/Satellite Receiver to the DVD/VCR. With the connection on this page:
● Select TV channels at the Cable Box/Satellite Receiver, not the
DVD/VCR. To record or view TV channels, follow these steps:
1) Press VCR to put the DVD/VCR in VCR mode. The green
●
●
VCR light will appear on the front of the DVD/VCR.
2) Press SKIP i /CHo or SKIP j /CHp to set the
DVD/VCR to the Cable Box/Satellite Receiver output channel
(03 or 04).
3) Set the TV to the DVD/VCR’s output channel (03 or 04).
The DVD/VCR’s output channel is channel 3 when the
DVD/VCR is new. To change it from 3 to 4, press and hold the
(VCR) PLAY B button on the DVD/VCR for 3-5 seconds during tape playback. For more details, see step 4 on page eight.
4) Select the channel you want to view/record at the Cable
Box/Satellite Receiver.
You may not view a channel other than the one you are recording.
You can only program a timer recording for one channel at a time. Set your Cable Box/Satellite Receiver to the channel you want to record. When you enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable
Box/Satellite Receiver output channel). (This is step 7 on page
38.) Leave the Cable Box/Satellite Receiver on for a timer recording.
Helpful Hint
• If your Cable Box or Satellite
Receiver has Audio and Video Out jacks, use audio and video cables to connect them to the VCR
AUDIO IN and VIDEO IN jacks on the rear of the DVD/VCR. You will not need the RF coaxial cable connection between the Cable
Box/Satellite Receiver and the
DVD/VCR as described at step 2.
10 Hookups (cont’d)
DVD/VCR to Cable Box or Satellite Receiver and TV
Using only basic RF coaxial cables
This connection will let you use the features of both the VCR and the DVD Player.
DVD/VCR
1 Cable
Signal
ANT-IN
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
ANT-OUT
VIDEO OUT VIDEO IN
2
IN
Y
C B
C R
L
R
COAXIAL
OUT
75
AN
CAB
T /
LE
RF coaxial cable
RF coaxial cable
3 TV’s ANTENNA
IN Jack
Connections
1
2
Connect a Cable TV or Satellite signal to the
DVD/VCR’s ANT-IN (Antenna In) jack.
Use an RF coaxial cable (as the one supplied) to connect the ANT-OUT (Antenna Out) jack on the
DVD/VCR to the IN jack on the Cable Box/Satellite
Receiver.
3 Use a second RF coaxial cable to connect the OUT jack on the Cable Box/Satellite Receiver to the
ANTENNA IN jack on the TV.
Remember...
There are two ways to connect your Cable Box/Satellite Receiver to the DVD/VCR. With the connection on this page:
●
●
You may watch one channel while recording another. Follow these steps:
1) Put the Cable Box/Satellite Receiver on the same channel as the DVD/VCR’s output channel (03 or 04). The DVD/VCR’s output channel is channel 3 when the DVD/VCR is new. To alternate it between 3 and 4, press and hold the (VCR) PLAY B button on the front of the DVD/VCR for 3-5 seconds during tape playback.
For more details, see step 4 on page eight. Set the TV to the
Cable Box/Satellite Receiver output channel (03 or 04).
2) Press VCR to put the DVD/VCR in VCR mode. The green
VCR light will appear on the front of the DVD/VCR.
3) Press VCR/TV on the remote to choose VCR position.
4) Press SKIP i /CHo or SKIP j /CHp to select the channel you want to record at the DVD/VCR. Press REC or RECORD to start the recording.
5) Press VCR/TV on the remote once to put the DVD/VCR in TV position.
6) Select the channel you want to watch at the Cable
Box/Satellite Receiver.
When you play a tape or Disc, make sure the Cable Box/Satellite
Receiver is set to the DVD/VCR’s output channel (03 or 04).
Set the TV to the Cable Box/Satellite Receiver output channel (03 or 04).
Helpful Hints
• When you play a tape, make sure the Cable Box/Satellite Receiver is set to the same channel as the RF output channel of the DVD/VCR
(03 or 04). Set the TV to the
Cable Box/Satellite Receiver output channel (03 or 04).
• If your Cable Box or Satellite
Receiver has Audio and Video Out jacks, use audio and video cables to connect them to the VCR
AUDIO IN and VIDEO IN jacks on the rear of the DVD/VCR. You will not need the RF coaxial cable connection between the Cable
Box/Satellite Receiver and the
DVD/VCR as described at step 2.
Hookups (cont’d) 11
DVD/VCR to a TV that has Audio and Video In jacks
Using the supplied red, white, and yellow cables
This connection will let you use the features of both the VCR and the DVD Player.
1 Antenna or Cable TV
Signal to ANT-IN Jack
ANT-IN
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
ANT-OUT
VIDEO OUT VIDEO IN
2
Audio Cables
3
Video Cable
DVD
S-VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO
OUT
Y
DIGITAL
AUDIO OUT
C
C
B
R
L
R
COAXIAL
Audio and
Video IN Jacks on TV
1
2
Connect the antenna or Cable TV signal to the ANT-IN (Antenna
In) jack of your DVD/VCR.
Connect the red and white audio cables (supplied) to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red
and white AUDIO IN jacks on the TV. Match the cable colors to the jack colors. If the TV has a single AUDIO IN jack, use the white audio cable to connect the DVD/VCR’s white DVD/VCR AUDIO OUT (left) jack to the TV’s
AUDIO IN jack. You will not use the red cable. Or, purchase a “splitter” audio cable to go from the left/right AUDIO OUT jacks of the DVD/VCR to the TV’s single AUDIO IN jack.
3 Connect the yellow video cable (supplied) to the DVD/VCR VIDEO
OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV.
The VIDEO IN jack on the TV is usually yellow and may be labelled CVBS,
Composite, or Baseband video.
4 Connect the power cords of the TV and the DVD/VCR to a power outlet. Turn on the TV and set it to the correct Audio/Video In
channel. Go to your lowest TV channel (0 1 or 02), then change channels downward until you see VCR or DVD playback on the TV screen.
To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press
DVD to put the DVD/VCR in DVD mode. With no Disc in the Player, a large
DVD Video logo will appear on the TV screen when you get the TV on the correct Audio/Video In channel.
5 You are ready to turn on the DVD/VCR. Go to page 17 to complete the first-time setup.
12 Hookups (cont’d)
DVD/VCR to a TV that has Component Video In jacks
1
Antenna or
Cable TV
Signal
ANT-IN
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
ANT-OUT VIDEO OUT VIDEO IN
2 3
DVD
DIGITAL
AUDIO OUT
Y
CB
CR
L
COAXIAL
R
AUDIO IN
L
R
COMPONENT
VIDEO IN
Y
Cb/Pb
Cr/Pr
1
2
Connect the antenna or Cable TV signal to the ANT-IN (Antenna
In) jack of your DVD/VCR.
Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO OUT Jacks on the DVD/VCR and to the
red and white AUDIO IN jacks on the TV. Match the cable colors to the jack colors.
3 Connect component video cable (not supplied) to the COMPO-
NENT VIDEO OUT jacks on the DVD/VCR and to the COMPO-
NENT VIDEO IN jacks on the TV. The Component Video In jacks on the
TV are usually red, blue, and green.
The Component Video connection only supplies video (picture) for the DVD Player of the DVD/VCR. Therefore, in order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coaxial cable between the
ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable. To connect the supplied RF coaxial cable, see step 2 on page eight. To connect the supplied yellow video cable, see step 3 on page 11.
4 Connect the power cords of the DVD/VCR and TV to a power outlet. Turn on the TV and set it to the Component Video In channel for DVD Player features.
If you are using the RF coaxial cable for VCR playback, choose channel 3 or 4 at the TV. If you are using the yellow video cable for VCR playback, choose the Video In channel at your TV.
Go to your lowest TV channel and change channels down until you see VCR or DVD playback on the TV screen, or try channel 3 or 4 at the TV.
To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press
DVD to put the DVD/VCR in DVD mode. With no Disc in the Player, a large
DVD Video logo will appear on the TV screen when you get the TV on the correct Component Video In channel.
5
6
You are ready to turn on the DVD/VCR. Go to page 17 before turning on the DVD/VCR.
After you complete the VCR setup as described on page 17, set
DOLBY DIGITAL to OFF in the DVD Player’s Setup menu. Details
are on page 68. If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the TV speakers.
1
Antenna/Cable
TV Signal
ANT-IN
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
ANT-OUT VIDEO OUT VIDEO IN
Hookups (cont’d) 13
DVD/VCR to a TV that has an S-Video In jack
S-VIDEO
OUT
DVD
COMPONENT
VIDEO OUT
AUDIO
OUT
Y
DIGITAL
AUDIO OUT
L
COAXIAL
R
2
AUDIO IN
LEFT
RIGHT
S-VIDEO IN
3
1
2
Connect the antenna or Cable TV signal to the ANT-IN (Antenna
In) jack of your DVD/VCR.
Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO OUT Jacks on the DVD/VCR and to the
red and white AUDIO IN jacks on the TV. Match the cable colors to the jack colors.
3 Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack on the DVD/VCR and to the S-VIDEO IN jack on the TV.
The S-Video connection only supplies video (picture) for the DVD Player of the
DVD/VCR. Therefore, in order to use the VCR features or view TV channels at the
DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-
OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable. To connect the supplied RF coaxial cable, see step 2 on page eight. To connect the supplied yellow video cable, see step 3 on page 11.
4 Connect the power cords of the DVD/VCR and TV to a power outlet. Turn on the TV and set it to the S-Video In channel for DVD
Player features.
If you are using the RF coaxial cable for VCR playback, choose channel 3 or 4 at the TV. If you are using the yellow video cable for VCR playback, choose the Video In channel at your TV. To find the correct Video In channel, go to your lowest TV channel and change channels downward until you see VCR or
DVD playback on the TV screen, or try channel 3 or 4 at the TV.
To help you find the right S-Video In channel, turn on the DVD/VCR. Press DVD to put the DVD/VCR in DVD mode. With no Disc in the Player, a large DVD
Video logo will appear on the TV screen when you get the TV on the S-Video In channel.
5
6
You are ready to turn on the DVD/VCR. Go to page 17 before turning on the DVD/VCR.
After you complete the VCR setup as described on page 17, set
DOLBY DIGITAL to OFF in the DVD Player’s Setup menu. Details
are on page 68. If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the TV speakers.
14 Hookups (cont’d)
DVD/VCR to a TV and a Stereo
1
Antenna/Cable
TV Signal
ANT-IN
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
ANT-OUT
VIDEO OUT VIDEO IN
Y
C
B
DVD
DIGITAL
AUDIO OUT
C
R
L
R
COAXIAL
VIDEO IN
3
2
AUDIO (LEFT) IN
AUDIO (RIGHT) IN
1
2
Connect the antenna or Cable TV signal to the ANT-IN (Antenna
In) jack of your DVD/VCR.
Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO OUT Jacks on the DVD/VCR and to the
red and white AUDIO IN jacks on the Stereo. Match the cable colors to the jack colors.
3 Connect the supplied yellow video cable to the DVD/VCR VIDEO
OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV.
To use Component Video cable or S-Video cable instead for the DVD Player, see pages 12-13. You will still need the yellow video cable or RF coaxial cable for VCR features.
4 Connect the power cords of the DVD/VCR, TV, and Stereo to a
power outlet. Turn on the TV and set it to the Video In channel. Or, simply go to your TV’s lowest channel (02 or 03) and continue changing channels downward at the TV until you see VCR or DVD playback on the TV screen.
To help you find the right Video In channel at the TV, turn on the DVD/VCR.
Press DVD to put the DVD/VCR in DVD mode. With no Disc in the Player, a large DVD Video logo will appear on the TV screen when you get the TV on the correct Video In channel.
5
6
You are ready to turn on the DVD/VCR. Go to page 17 before turning on the DVD/VCR.
After you complete the VCR setup as described on page 17, set
DOLBY DIGITAL to OFF in the DVD Player’s Setup menu. Details
are on page 68. If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the speakers.
Hookups (cont’d) 15
DVD/VCR to a TV and to a Stereo that is Dolby Digital-compatible
Using Digital Audio connections
1
Antenna/Cable TV Signal
ANT-IN
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
ANT-OUT
VIDEO OUT VIDEO IN
S-VIDEO
OUT
COMPONENT
VIDEO OUT
DVD
AUDIO
OUT
Y
DIGITAL
AUDIO OUT
L
COAXIAL
R
3
VIDEO IN
Back of TV
(example only)
2
1
2
Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your DVD/VCR.
Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s
COAXIAL DIGITAL AUDIO OUT jack and to the COAXIAL DIGITAL
AUDIO IN jack on the Stereo.
This digital audio connection only provides sound for the DVD Player of the DVD/VCR. So, in order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR and the
TV’s Antenna In jack, or connect the supplied red/white audio cables. To connect the supplied RF coaxial cable, see step 2 on page eight. To connect the red/white audio cables, see step 2 on page 11.
3 Connect the supplied yellow video cable to the yellow DVD/VCR VIDEO
OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV. To use component video cable or S-Video cable instead for the DVD Player, see pages 12-
13. You will still need the yellow video cable or RF coaxial cable for VCR features.
4 Plug in the power cords of the Stereo, TV, and DVD/VCR. Turn on the
Stereo and select its Auxiliary IN channel. Turn on the TV and set it to
the correct Video In channel. Go to your TV’s lowest channel (0 1 or 02) and change channels downward until you see DVD or VCR material on the TV screen.
To help you find the right Video In channel on the TV, turn on the DVD/VCR.
Press DVD to put the DVD/VCR in DVD mode. With no Disc in the Player, a large
DVD Video logo will appear on the TV screen when you get the TV on the correct
Video In channel.
5 You are ready to turn on the DVD/VCR. Go to page 17 before turning on the DVD/VCR.
Remember...
Some DVDs are recorded in 5.
1 channel Dolby Digital Surround. Select 5.1 channel Dolby
Digital Surround Sound in the DVD Disc menu. If Dolby Digital Surround is not recorded on the Disc, you will not have surround sound available.
If you connect the DVD/VCR to a Dolby Digital Stereo, set DOLBY DIGITAL to ON in the DVD Player’s Setup menu. Details are on page 68. If the DVD/VCR is not connected to a Dolby Digital-compatible Stereo, set DOLBY DIGITAL to OFF. Incorrect settings may cause noise distortion and damage the speakers.
COAXIAL
DIGITAL
AUDIO IN
Stereo
16 Remote Control Setup
Putting Batteries in the Remote Control
1 Remove the battery compartment lid on the bottom of the remote control by pressing the tab, then lifting the lid.
2
3
Place two AA batteries inside the battery compart-
ment with their + and – ends aligned as indicated.
Replace the battery compartment lid.
Using the Remote Control
●
●
Point the remote control at the DVD/VCR’s remote sensor
(marked IR, see page 22) when using the remote to operate the
DVD/VCR. Do not point the remote at the TV.
Do not put objects between the remote and the DVD/VCR.
Recycling Guidelines/Battery Safety
●
●
Your new product and its packaging contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount that needs to be properly disposed. Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regulations on disposal of your old product, batteries, and packaging whenever you replace existing equipment.
Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit:
Install ALL batteries correctly, with the + and - markings on the battery aligned as indicated on the unit;
Do not mix batteries, for example, old with new or carbon with alkaline; and
Remove batteries when the unit will not be used for a long time.
1
2
3
First-time DVD/VCR Setup 17
Before turning on your DVD/VCR, make sure batteries are in the remote control and the DVD/VCR and TV are connected correctly.
You cannot program channels if you are using a Cable Box or a
Satellite Receiver.
These menus may not appear if you have already turned on the DVD/VCR.
1 Turn on the TV. Set it to channel 3 or 4 or its
AUDIO/VIDEO IN channel, depending on how you connected the DVD/VCR to a TV.
2 Press STANDBY-ON. The green VCR light and the red
STANDBY-ON light will appear on the front of the
DVD/VCR. The display shown below will appear.
These menus may not appear if you have already turned on the DVD/VCR. You may have turned on the DVD/VCR before to find the Audio/Video In channel of the TV, for example. If so, follow the steps on page 26 to set up channels and page 30 to select a language for the VCR menus.
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP
Turn on the TV.
PLAY
2
3-4
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0 3 Press o or p to select English, French, or Spanish as the language for VCR on-screen displays and menus.
Then, press B.
AUTO SET UP
4 Press B to begin channel programming. AUTO
SETUP will flash on the TV screen during the channel search. The DVD/VCR will memorize all available channels.
When channel programming is complete, the lowest available channel will appear on the TV.
These channels will be available when you want to watch
TV while in VCR mode. To put the DVD/VCR in VCR mode, press VCR so the green VCR light appears. Use the
SKIP i /CHo and SKIP j /CHp buttons to select memorized channels. To select non-memorized channels, use the Number buttons.
Helpful Hints
• To skip this feature and play a tape immediately, insert a tape with its record tab removed.
• To skip step 3, press DISC/MENU.
VCR menus and displays will be in
English.
• If you try to program channels when there is no antenna or Cable
TV signal connected to the ANT-IN jack of the DVD/VCR, programming will stop. AUTO SET UP will stop flashing. Connect an antenna or
Cable TV signal to the DVD/VCR’s
ANT-IN jack and press B again.
• Repeat this process if the power fails.
• To stop the Channel Setup while
AUTO SET UP is flashing, press
DISC MENU.
18 Video Cassette Playback
Read and follow the steps below to play a tape.
1 Turn on the TV. Set it to channel 3 or 4 or its
AUDIO/VIDEO IN channel. This depends on how you connected the DVD/VCR to a TV.
Details are on pages 715.
2 With the DVD/VCR power off, insert a tape in the
cassette compartment of the DVD/VCR. The
STANDBY-ON and VCR lights will appear on the front of the DVD/VCR. If the tape’s record tab has been removed, playback will start automatically.
If the DVD/VCR power is already on, press VCR to put the DVD/VCR in VCR mode if necessary. The green VCR light will appear on the front of the DVD/VCR.
5
6
3
4
If playback does not start automatically, press VCR,
then press PLAY B.
Press STOP C to stop playback.
Press REW h to rewind the tape.
After the tape stops, press STOP/EJECT C A on the front of the DVD/VCR to remove the tape.
4
5
1
2
Turn on the TV.
Insert a tape in the
DVD/VCR.
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT REPEAT
A-B
TITLE
C-RESET
CLEAR
MODE RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP
1
4
REW FF
2
5
PAUSE
SPEED
3
6
SLOW
PLAY
6 Press STOP/EJECT C A on the DVD/VCR.
3
Helpful Hints
• Other tape playback features are on pages 40-47.
• If AUTO REPEAT is ON, playback will begin when you insert a tape, even when the record tab is intact.
Details are on page 40.
• You must connect the DVD/VCR to a TV using the RF coaxial cable or the audio/video cables in order to use the VCR features. These hookups are explained on pages eight and 11.
Disc Playback 19
Before you begin, turn on the TV, Stereo, and other equipment connected to the DVD/VCR. Make sure the TV and the Stereo (if applicable) are set to the correct channel.
Details are on pages 715.
3
4
1
2
Press STANDBY-ON to turn on the DVD/VCR.
Press DVD so the red DVD light appears on the front of the DVD/VCR.
Press OPEN/CLOSE A (to the right of the disc tray on the front of the DVD/VCR) to open the Disc tray.
Place a Disc into the tray. If the DVD is recorded on only one side, place the Disc in the tray with the label facing up and the shiny side facing down. Some DVDs are recorded on both sides. Make sure the label of the side you want to play is facing up.
5 Press PLAY B. The tray will close and play will begin at the first Chapter or Track. If a DVD menu appears instead,
see page 48. With some Audio CDs, playback will not begin unless you press PLAY B.
Or, press OPEN/CLOSE A or press the tray toward the
DVD/VCR to close the tray.
With MP3 and JPEG files, playback will begin from Track 1.
6 Press STOP C to stop playback.
2
6
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP
REW
PAUSE
FF
PLAY
1
5
3
4
Press OPEN/CLOSE A on the DVD/VCR.
Insert a Disc.
Remember, this DVD/VCR will play only certain Discs.
See page six for details.
Helpful Hints
• An “X” may appear at the top right corner of the TV screen when you try a feature. Either the feature is not available on the Disc, or the
DVD/VCR cannot access the feature at this time. This does not indicate a problem with the DVD/VCR.
• If a Disc is dirty or scratched, the picture may appear distorted or playback may stop. Remove the
Disc and turn off the DVD/VCR.
Disconnect the power cord, then reconnect it. Clean the Disc, then turn on the DVD/VCR again and reinsert the Disc for playback.
• When the DVD or CD light appears on the display panel, the Disc is loaded and ready for playback.
• When you press OPEN/CLOSE A or PLAY (DVD) on the front of the
DVD/VCR when the power is off, the DVD/VCR will turn on in DVD mode. Otherwise, the DVD/VCR will turn on in the mode in which it was turned off.
20 Display Panel (DVD)
Display
Messages about current Disc operations appear here.
See Display Messages below.
DVD Light (red)
This light appears when the DVD/VCR is in DVD mode.
You can only watch DVDs when the red DVD light is on.
To make the red DVD light come on, press OUTPUT on the front of the DVD/VCR or DVD on the remote.
DVD / VIDEO CD / CD PLAYER / VCR MDV530VR
STANDBY-ON
Disc tray
Insert a
Disc here.
STOP PLAY
OPEN
CLOSE
IR
DVD-
OUTPUT
-VCR
TIMER
REC
REC RECORD STOP / EJECT PLAY
VIDEO AUDIO L AUDIO R
REPEAT: Appears during Repeat
Playback of a Disc, along with A-B,
TITLE, CHP., or
TRK., depending on the type of Repeat
Playback you have selected. Details are on page 53.
A-B: Appears during
A-B Repeat Playback.
Details are on page 53.
REPEAT
A – B
B : Appears during
Disc playback.
F : Appears when play is paused.
TITLE CHP. TRK.
Displays the elapsed playing time of the current Title or Track. Briefly displays
Title, Chapter, or Track numbers.
STANDBY-ON Light
This red light appears when the power is on.
DVD: Lights when a
DVD is in the tray and ready for playback.
CD: Lights when a
CD is in the tray and ready for playback.
Display Messages
Appears after the disc tray closes if the tray is empty, if there is an error reading the disc, or if an unacceptable disc is installed.
Tray is opening or is open.
Tray is closing.
Disc is loading.
Display Panel (VCR) 2 1
Counter/Clock/Channel
If there is a tape in the VCR, the tape counter will appear. The remaining time will appear during a One-Touch Recording.
If there is not a tape in the VCR, the current time will appear when the clock is set. An A or P will appear beside the time to indicate
AM or PM. The DVD/VCR must be in VCR mode. The channel number will appear here briefly when you change TV channels.
DVD / VIDEO CD / CD PLAYER / VCR MDV530VR
STOP PLAY
Cassette Compartment
Insert a video cassette here.
IR
DVD-
OUTPUT
-VCR
TIMER
REC
REC RECORD STOP / EJECT PLAY
VIDEO AUDIO L AUDIO R
STANDBY-ON
VCR light (green)
This light appears when the DVD/VCR is in VCR mode. You can only watch videotapes or access VCR features and TV channels when the green VCR light is on.
To make the green
VCR light come on, press VCR on the remote control or
OUTPUT on the front of the DVD/VCR.
DVD-
OUTPUT
-VCR TIMER
REC
REC RECORD STOP / EJECT PLAY
VIDEO AUDIO L AUDIO R
STANDBY-ON
STANDBY-ON
Light
This red light appears when the power is on.
REC (record) Light
This red light appears during
VCR recording. It flashes when recording is paused.
TIMER REC Light
This red light glows when the
DVD/VCR is set for a timer recording or during a One-Touch Recording.
It flashes if a timer recording is set but no tape is in the DVD/VCR.
It flashes when all timer recordings or
One-Touch Recordings are finished.
22 Front Panel
OPEN/CLOSE A Button (DVD)
Press to open or close the Disc tray.
RECORD I button (VCR)
Press once to start a recording.
Press repeatedly to start a One-
Touch Recording.
Details are on page 34.
STOP/EJECT C A
Button (VCR)
Press once to stop tape playback. When playback is stopped, press to eject the tape.
STANDBY-ON Button
Press to turn the power on or off.
DVD / VIDEO CD / CD PLAYER / VCR MDV530VR
STOP PLAY
STOP C Button (DVD)
Press to stop Disc playback.
Details are on page 19.
PLAY B Button (DVD)
Press to start Disc playback.
Details are on page 19.
IR (Infrared) Remote Sensor
Receives a signal from your remote control so you can work your
DVD/VCR from a distance. Point the remote control toward the
DVD/VCR’s IR sensor, not your TV.
OUTPUT Button
Press to select DVD mode or VCR mode. The red DVD light appears in DVD mode. The green VCR light appears in the VCR mode.
OPEN
CLOSE
STANDBY-ON
IR
DVD-
OUTPUT
-VCR
TIMER
REC
REC RECORD STOP / EJECT PLAY
VIDEO AUDIO L AUDIO R
PLAY B Button (VCR)
Press to play a video cassette. Press to release
Slow, Search, or Still mode and return to playback.
Details are on page 43.
AUDIO and VIDEO In Jacks
Connect audio and video cables coming from the audio and video out jacks of a camcorder, another
VCR, another DVD Player, or audio system here. This will be useful if you want to copy a videotape or watch material that is playing on other equipment.
Details are on page 35.
ANT-IN (Antenna In) Jack
Connect your antenna or Cable TV signal here. Details are on pages 8- 15.
VCR AUDIO IN Jacks
Left (white) and Right (red)
Connect audio cables coming from the audio out jacks of a camcorder, another VCR, another DVD Player, or an audio source here. Details are on page 35. This will be useful if you want to copy a videotape or watch material that is playing on other equipment.
Rear Panel 23
DVD AUDIO OUT Jacks
Left (white) and Right (red)
Connect the supplied audio cables here and to the Audio In jacks of a television or audio equipment.
However, these jacks only supply audio for the DVD Player. Use these if you want a secondary connection between the DVD Player and another TV, etc.
AC Power Cord
Connect to a standard
AC outlet to supply power to the DVD/VCR.
ANT-IN
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
ANT-OUT VIDEO OUT VIDEO IN
DVD S-VIDEO OUT Jack
Connect an S-Video cable (not supplied) here and to the S-Video In jack of a television. This supplies the picture only for the DVD Player. Details are on page 13.
VCR VIDEO IN Jack (yellow)
Connect a video cable coming from the video out jack of a camcorder, another VCR, or another DVD
Player here. Details are on page 35.
DVD/VCR VIDEO OUT Jack (yellow)
Connect the yellow video cable (supplied) here and to the TV’s Video In jack. This supplies the picture for both the VCR and the DVD Player. Details are on page 11.
ANT-OUT (Antenna Out) Jack
Use the supplied RF coaxial cable to connect this jack to the ANTENNA IN jack on your TV, Cable Box, or Satellite
Receiver. Details are on pages 8- 10.
DVD/VCR AUDIO OUT Jacks
Left (white) and Right (red)
Connect the supplied audio cables
(red and white) here and to the
Audio In jacks of a TV or Stereo.
Details are on pages 11-14. These jacks provide audio for both the
DVD Player and the VCR.
DVD
S-VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO
OUT
Y
DIGITAL
AUDIO OUT
C B
C R
L
R
COAXIAL
DVD COAXIAL DIGITAL
AUDIO OUT Jack (black)
Connect a coaxial digital audio cable
(not supplied) here and to the Coaxial
Digital Audio In jack of a Stereo. This supplies audio only for the DVD
Player. Details are on page 15.
DVD COMPONENT VIDEO OUT
(Y C
B
C
R
) Jacks (green, blue, red)
Connect component video cables (not supplied) here and to the Component
Video In jacks of a television. This supplies the picture only for the DVD
Player. Details are on page 12.
Helpful Hint
• The DVD S-VIDEO OUT, DVD
COMPONENT VIDEO OUT, DVD
AUDIO OUT and DVD COAXIAL
DIGITAL AUDIO OUT jacks are only useful in DVD mode. To have sound and picture in VCR mode, you must connect either the RF coaxial cable or the audio/video cables supplied, using the DVD/VCR AUDIO OUT and VIDEO OUT jacks on the left of the rear of the DVD/VCR. Details are on pages eight and 11.
24 Remote Control
TIMER SET Button
Press to set a timer recording that you have programmed.
Details are on pages 36-38.
SETUP Button
Press to access or remove the
DVD Player’s Setup menu.
REC (record) I Button
Press to start a VCR recording. Details are on page 32.
TITLE Button
Press to see a DVD Title menu. Details are on page 48.
DISC/MENU Button
Press to access or remove a
DVD Disc menu or the VCR menu.
s B KL Buttons
Press to select an item in a menu.
Number Buttons
In DVD mode, press to select a Track or Chapter for playback. Use the + 10 button for items 10 and above. Details are on pages 50-5 1.
In VCR mode, use to select
TV channels. Enter channel numbers as a two-digit number for the quickest results (to select channel 6, press 0,6).
For channels 100 and above, enter a three-digit number (for channel 117, press 1, 1, 7). If you have Cable TV, channels
1-125 are available. If you have an antenna, channels 2-69 are available. The + 10 button has no effect in VCR mode.
ZOOM Button
Press to enlarge the DVD or
JPEG image. Details are on page 59.
STANDBY-ON
TIMER SET
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT REPEAT
A-B
SKIP/
CH
TITLE
C-RESET
CLEAR
MODE RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP PLAY
4
7
REW
1
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
Helpful Hints
• For DVD Player features, press DVD before pressing other buttons. To put the DVD/VCR in DVD mode, press DVD or OUTPUT so the red DVD light appears on the front of the DVD/VCR.
• For VCR features, press VCR before pressing any other buttons. To put the DVD/VCR in VCR mode, press VCR or OUTPUT so the green VCR light appears on the front of the DVD/VCR.
STANDBY-ON Button
Press to turn the power on or off.
ANGLE Button
Press to see a DVD picture from a different angle. Details are on page 55.
A-B REPEAT Button
Press to set up A-B Repeat.
Details are on page 53.
RETURN Button
Press to return to the previous level of the DVD Player’s
Setup menu or to remove the
Setup menu.
OK Button
Press to confirm or select menu items.
PLAY B Button
Press to begin Disc or tape playback.
FF g
(fast forward) Button
In DVD mode, press to fast forward the Disc. Details are
on page 49. Press when DVD playback is paused to start slow motion playback. Details are on page 59.
In VCR mode, press to fast forward the tape. Details are on page 43.
SPEED Button
Press to select the VCR’s recording speed (SP or SLP). Details are on pages 30, 35, and 72.
SEARCH MODE Button
In DVD mode, press to search for a specific
Title/Chapter/Track/Time.
Details are on pages 50-5 1.
In VCR mode, press for a Time
Search or an Index Search.
Details are on page 42.
AUDIO Button
Press to choose a DVD audio language or an Audio CD sound mode.
Details are on page 58.
REPEAT Button
Press to play a Track, Audio
CD, Title, or Chapter repeatedly. Details are on page 53.
C-RESET/CLEAR Button
Press to remove VCR menus.
Press to reset the tape counter. Details are on page 4 1.
Press to reset a menu item in
DVD mode.
DVD Button
Press before using the remote control for DVD features.
Press to put the DVD/VCR in
DVD mode.
DISPLAY Button
In VCR mode, press to see status displays. Details are on page 3 1. In DVD mode, press to access Disc information.
Details are on page 69.
STOP C Button
Press to stop Disc playback, tape playback, or recording.
PAUSE k Button
Press to pause Disc playback or to advance the picture one frame at a time. Details are on
page 52. Press to pause or resume VCR recording. Details
are on page 32. Press to pause a tape. Details are on page 43.
REW h (rewind) Button
Press to fast reverse a DVD or
Audio CD. Details are on page
49. Press to rewind a tape.
Details are on page 43.
TIMER SET
STOP
DVD
DISC
MENU
DISPLAY
Remote Control (cont’d) 25
STANDBY-ON
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT REPEAT
A-B
SKIP/
CH
TITLE
C-RESET
CLEAR
MODE RETURN
SKIP/
CH
VCR
OK
PLAY
SUBTITLE Button
Press to select a language for
DVD subtitles. Details are on page 55.
SKIP i/CHo and
SKIP j /CHp Buttons
In DVD mode, press to skip
Chapters or Tracks. In VCR mode, press to change TV channels at the DVD/VCR.
MODE Button
Press to set a Program. Details
are on page 60. Press to start
Random playback.
Details are on page 6 1.
VCR Button
Press before using the remote control for VCR features.
Press to put the DVD/VCR in
VCR mode.
4
7
REW
1
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
SLOW Button
Press to view a videotape in slow motion. Details are on page 43.
VCR/TV Button
Press to select VCR or TV position. In VCR position, watch a tape or watch/record
TV programs (changing channels at the VCR).
Use TV position to watch TV channels (changing channels at the TV) or watch one program while recording another.
Details are on page 33.
26 Channel Setup
Although your DVD/VCR may automatically memorize the channels you receive when you turn it on for the first time, you can set up the channels again.
1 Press VCR, then press DISC/MENU.
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
[ON]
2 Press o or p to select CHANNEL SET UP. Then,
press B.
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
[ON]
4
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
2,3
STOP PLAY
REW FF
1
4
7
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
+10 0
3 Press o or p to select AUTO SET UP. Press B.
CHANNEL SET UP
B AUTO SET UP
MANUAL SET UP
4 AUTO SET UP will flash while the DVD/VCR sets up the available channels. When setup is complete, the lowest available channel will appear on the TV.
Now when you press SKIP i /CHo or SKIP j
/CHp, you will scan only through available channels. You still can select any channel using the Number buttons.
AUTO SET UP
Helpful Hints
• You cannot program channels if you are using a Cable Box or
Satellite Receiver.
• If you have an antenna, channels
2-69 will be available. If you have
Cable TV, channels 1-125 will be available.
• To stop Channel Setup, press
DISC/MENU while AUTO SET UP is flashing.
Channel Setup (cont’d) 27
Adding/Deleting Channels
You may want to add or delete TV channels if your channel lineup changes or if you no longer watch some channels.
1
2
3
Press VCR, then press DISC/MENU.
Press o or p to select CHANNEL SET UP, then
press B.
Press o or p to select MANUAL SET UP, then
press B.
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
1
2-5
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP PLAY
6
4 Press o or p until the channel number you want to add or delete appears on the screen.
MANUAL SET UP
CHANNEL 30 (CATV)
ADD
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
5
6
Press B or s so ADD or DELETE flashes on the screen.
While your choice is flashing, press
C-RESET/CLEAR. The channel you added or deleted will be the current channel. Added channels are available when you flip through channels using the SKIP i /CHo and SKIP j /CHp buttons. You still can select deleted channels with the Number buttons.
28 Clock (VCR)
Follow these steps to set the VCR clock. Make sure:
● The DVD/VCR is on and in VCR mode. Press VCR so the green VCR light appears on the front of the DVD/VCR.
1
2
3
Press VCR, then press DISC/MENU.
Press o or p to select CLOCK SET, then press B.
While the MONTH space is flashing, press o or p
until the month appears. Then, press B.
CLOCK SET
MONTH DAY
0 3 / – –
HOUR MINUTE
– – : – –
YEAR
– – – –
AM/PM
– –
1
2-5
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP PLAY
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
4 While the DAY space is flashing, press o or p until
the day appears. Then, press B.
CLOCK SET
MONTH DAY
0 3 / 2 0
YEAR
– – – –
HOUR MINUTE
– – : – –
AM/PM
– –
5 While the YEAR space is flashing, press o or p
until the year appears. Press B. The day of the week will appear automatically.
CLOCK SET
MONTH DAY
0 3 / 2 0 THU
HOUR MINUTE
– – : – –
YEAR
2 0 0 3
AM/PM
– –
Helpful Hints
• If the clock has never been set, the
CLOCK SET menu may appear when you press DISC/MENU. If so, follow the instructions from step 3 above.
• Press DISPLAY until the time appears on the TV screen.
• Power failures of more than 30 seconds can erase the clock setting.
Clock (VCR) (cont’d) 29
6 While the HOUR space is flashing, press o or p
until the hour appears. Then, press B.
CLOCK SET
MONTH DAY
0 3 / 2 0 THU
HOUR MINUTE
0 5 : – –
YEAR
2 0 0 3
AM/PM
– –
7 While the MINUTE space is flashing, press o or p
until the minute appears. Then, press B.
CLOCK SET
MONTH DAY
0 3 / 2 0 THU
HOUR MINUTE
0 5 : 4 0
YEAR
2 0 0 3
AM/PM
– –
9
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
6-9
STOP PLAY
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
8 While the AM or PM space is flashing, press o or p to point to AM or PM.
Your selection will flash on the screen in the AM/PM space.
CLOCK SET
MONTH DAY
0 3 / 2 0 THU
HOUR MINUTE
0 5 : 4 0
YEAR
2 0 0 3
AM/PM
P M AM
B PM
9 Press C-RESET/CLEAR or B to start the clock.
Helpful Hint
• To reset the clock, follow steps 1-
2 on page 28. Select the informa-
tion you want to change using B
or s. When the information is
flashing, use o or p to enter the correct information. Press
C-RESET/CLEAR to set the clock.
30 Language (VCR)
Follow the steps below to change the language of the VCR onscreen displays and menus.
1 Press VCR, then press DISC/MENU.
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
[ON]
2 Press o or p to choose LANGUAGE SELECT,
then press B.
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
B LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
[ON]
3 Press o or p to choose ENGLISH, FRANCAIS
(French), or ESPANOL (Spanish).
B
LANGUAGE SELECT
ENGLISH
FRANCAIS
ESPAÑOL
[ON]
4
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
2,3
STOP PLAY
4
7
REW
1
+10
FF
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
4 Press C-RESET/CLEAR to remove the menu.
Helpful Hint
• If you select French or Spanish and need English:
1) Press DISC/MENU so MENU appears.
2) Press p to choose SELECTION
LANGUE or SELEC. IDIOMA, then
press B.
3) Press o or p to select ENGLISH.
4) Press C-RESET/CLEAR.
You may access status displays by pressing DISPLAY. The displays may include the current time, channel, and other information.
1 Press DISPLAY. The COUNT display will appear for five seconds. After five seconds, only the real-time tape counter will appear. This counter shows you the elapsed playing time of the tape (from the point at which the counter was set to zero). The counter also will appear on the display panel on the front of the DVD/VCR.
VCR Status Displays 3 1
STOP
1-3
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
SLP
2 Press DISPLAY again. The CLOCK display will appear for five seconds. After five seconds, only the time will appear (the clock must be set). (If you are watching TV, the channel number and the availability of stereo or second audio will also appear.) The time also will appear on the display panel on the front of the DVD/VCR.
STOP
0: 12:34 HIFI
5:40 PM
CH 02
STEREO
SAP
STOP PLAY
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
SLP
3 Press DISPLAY again to remove all the displays.
Helpful Hints
• If the channel you select has no broadcast, the screen will be solid blue.
• You cannot access a status display when viewing a still picture, during slow motion, or during forward and reverse searching.
• Channel numbers appear on the screen for a few seconds each time you change channels.
32 Videotape Recording
Read and follow the steps below to record a television program onto a videotape. Before you begin, make sure the DVD/VCR is in
VCR mode. Press VCR so the green VCR light appears on the front of the DVD/VCR.
1 Turn on the TV and set it to channel 3 or 4 or the
Video In channel. If you connected the DVD/VCR to the
TV using the supplied audio and video cables, select your
TV’s Video In channel. Details are on page 11.
If you connected the DVD/VCR to the TV using the supplied RF coaxial cable, choose channel 3 (or 4) at the TV.
Details are on pages 810.
2 Insert a tape with its record tab intact into the cas-
sette compartment of the DVD/VCR. If tape playback begins, press STOP C.
3 Press SPEED until the desired tape speed (SP or
SLP) appears briefly on the screen. Details about tape speed are on page 72.
4 Press SKIP i /CHo or SKIP j /CHp or the
Number buttons to select the TV channel to record.
5
6
Press REC I to start recording. The red REC light will appear on the front of the DVD/VCR.
To pause the recording, press PAUSE k once. The red REC light will flash. To resume recording, press
REC I or press PAUSE k again. The red REC light will come on again.
7 To stop recording, press STOP C.
Recording Prevention
Video Cassettes have record tabs to ensure that recordings are not accidentally erased.
1
2
To prevent recording, break off the tab with a screwdriver.
To allow recording, cover the hole with clear tape.
Remove the tab to prevent recording.
Cover the hole to allow recording.
1
2
Turn on the TV.
Insert a tape in the
DVD/VCR.
5
4
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
7
6
4
STOP PLAY
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
3
Helpful Hints
• Other recording options are on pages 33-39.
• The VCR will record in a preset volume.
• Pause will switch to Stop after five minutes to protect the VCR and the tape from damage. When a recording is paused, review the
pause time remaining with the ■
marks on the screen. Each ■ mark equals one minute remaining. During the last minute of
paused recording, the ■ mark will flash.
• If any menu is on the TV screen, the REC I button on the remote does not function. Press C-
RESET/CLEAR to remove the menu. Then, press REC I . Or, use the RECORD I button on the front of the DVD/VCR.
Recording One Channel/Watching Another 33
3
4
1
2
Press VCR, then press REC I to record the current
TV channel. Details are on page 32.
Press VCR/TV once to put the DVD/VCR in TV position.
Use the TV remote control to select the channel you want to watch at the TV.
To return to the channel being recorded, use the
TV remote control to select channel 03 or 04 at
the TV. Details are on page eight. Or, if you connected the
DVD/VCR to the TV using audio and video cables, select the TV’s correct Video In channel. Details are on page 11.
1
6
5 Press VCR/TV on the DVD/VCR remote control to
put the DVD/VCR in VCR position. The channel being recorded will appear on the TV screen.
6 Press STOP C to stop the recording.
TIMER SET
STANDBY-ON
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
STOP
DVD
DISC
MENU
DISPLAY
VCR
OK
PLAY
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
2,5
3 Select the channel you want to watch at the TV.
4 Select channel 03, 04, or Video In at the TV.
Helpful Hint
• If you use a Cable Box or Satellite
Receiver, you may not be able to watch one channel while recording another. See pages 910 for details.
34 One-Touch Recording
One-Touch Recording (OTR) lets you set a timed recording 30 minutes to eight hours long. Before you begin:
● Place the DVD/VCR in VCR mode. Press VCR so the green
●
VCR light appears on the front of the DVD/VCR.
Select a recording speed (SP, SLP) with the SPEED button.
● Put a videotape in the cassette compartment. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).
1 Press VCR, then press SKIP i /CHo or SKIP j
/CHp or the Number buttons to select the channel you want to record.
2 Press RECORD I on the front of the DVD/VCR until the desired recording length (30 minutes to
eight hours) appears on the TV screen. Recording will begin. The REC light and the TIMER REC light will appear on the front of the DVD/VCR.
OTR (0:30)
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP PLAY
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
SP
2 Press RECORD on the
DVD/VCR.
Stopping an OTR
To stop an OTR before recording is finished, press STOP on the remote control or STOP/EJECT C A on the front of the
DVD/VCR.
To cancel the OTR but continue recording, press RECORD on
the front of the DVD/VCR repeatedly until REC appears in the upper left corner of the screen.
When an OTR finishes, the DVD/VCR will either switch to DVD model or turn itself off. If it changes to DVD mode, press
STANDBY-ON to turn it off.
After an OTR, the TIMER REC light flashes because the VCR is still on standby for timer recordings. Press TIMER SET on the remote or STOP/EJECT C A on the DVD/VCR to cancel timer standby and use the VCR normally again.
Helpful Hints
• The remaining recording time will appear on the display panel. Press
DISPLAY to see it on the TV screen.
• To change the recording length while an OTR is in progress, press
RECORD on the front of the
DVD/VCR.
• You cannot start a timed OTR with the REC I button on the remote.
• You cannot pause an OTR.
• If the preset time for a timer recording comes up during an OTR, the OTR has priority. The timer recording will not take place.
• If the end of the tape is reached during an OTR, the VCR will stop recording, eject the tape, and switch to DVD mode or turn off.
1
Rerecording (Tape Duplication) 35
These instructions show you how to copy videotapes. The illustration uses two DVD/VCRs. Other VCRs or
Camcorders may operate differently.
1. Audio cables from AUDIO OUT jacks (red and white) of DVD/VCR 1 to AUDIO IN jacks of DVD/VCR 2
DVD/VCR 2
Recording unit
ANT-IN
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
ANT-OUT
VIDEO OUT VIDEO IN
DVD/VCR 1
Playing unit
ANT-IN
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
ANT-OUT VIDEO OUT VIDEO IN
2. Video cable from yellow
VIDEO OUT jack of DVD/VCR 1 to VIDEO IN jack of DVD/VCR 2
3. RF coaxial cable from the ANT-OUT
(Antenna Out) jack of DVD/VCR 2 to the TV’s ANTENNA IN Jack
1
2
Make the connections shown above.
DVD/VCR 1 will play your tape. Put a prerecorded tape into the cassette compartment of DVD/VCR 1.
Press VCR to put the unit in VCR mode if necessary.
3 DVD/VCR 2 will record your tape. Insert a blank tape
in the cassette compartment of DVD/VCR 2. Press
VCR to put the unit in VCR mode if necessary.
4 Turn on the TV and set it to channel 03 or 04 (the
RF output channel of DVD/VCR 2). To determine the
DVD/VCR’s output channel, see step 4 on page eight.
5 Point the remote control at DVD/VCR 2. Press
Number buttons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.)
6
7
Press SPEED to select SP or SLP at DVD/VCR 2.
Press PLAY B (VCR) on the front of DVD/VCR 1 and RECORD I on the front of DVD/VCR 2 at the same time.
To stop recording, press STOP/EJECT CA on DVD/VCR
1, then press STOP/EJECT CA on DVD/VCR 2.
Helpful Hints
• If you use the AUDIO and VIDEO
IN jacks on the back of DVD/VCR
2, press Number buttons 0, 0, 1 at step 5. L 1 will appear on the TV screen.
• If you use the AUDIO and VIDEO
In jacks on the front of DVD/VCR 2, press Number buttons 0, 0, 2 at step 5. L2 will appear on the TV screen.
• Unauthorized recording of copyrighted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.
• If a program has copyright protection, it may not record clearly.
• You cannot record DVD material onto a video cassette using a single unit.
36 Timer Recording
Follow the steps below to program the VCR of the DVD/VCR to record TV programs while you’re away from home. Before you begin:
● Set up the TV channels at the DVD/VCR. Details are on page 26.
● Set the clock. Details are on pages 28-29.
● Put a tape in the cassette compartment of the DVD/VCR. Make sure the tape’s record tab is intact and the tape is long enough
● to record the program(s).
Press VCR so the green VCR light appears on the front of the
DVD/VCR.
1
1
2
Press DISC /MENU so the MENU appears.
Press o or p to select TIMER PROGRAMMING.
Then, press B. Program numbers that do not have a timer recording stored will flash.
TIMER PROGRAMMING
PROG. 12345678
DATE
START TIME
END TIME
CHANNEL
REC SPEED
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP
REW FF
1
4
7
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
+10 0
PLAY
2-4
3 Press o or p to select an empty program. Then,
press B.
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
4 Press o or p to select ONCE, DAILY, or WEEKLY.
Then, press B.
● ONCE - The VCR will record a TV program on any day
● you choose, up to 12 months away.
DAILY - The VCR will record a TV program at the same time
● on the same channel every day, Monday through Friday.
WEEKLY - The VCR will record a TV program at the same time on the same channel every week, for example, every
Monday.
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
Helpful Hints
• You cannot access the TIMER
PROGRAMMING menu at step 2 if the clock is not set. The CLOCK
SET menu will appear. Follow the steps on pages 28-29 to set the clock.
• Only programs that will air Monday-
Friday can be recorded on a DAILY basis. If you select DAILY at step 4, then enter a Saturday or Sunday
DATE at step 5, the correct program will not be recorded. The VCR will alter the recording date and record a different program than the one you intended.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 4 SUN
START TIME 0 7 : 3 0 P M
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
AM
B PM
Timer Recording (cont’d) 37
5 Press o or p until the month appears.
Then, press B.
Next, press o or p until the day appears. Then,
press B. The day of the week will appear. You cannot record more than one year in advance.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 4 SUN
START TIME
END TIME
CHANNEL
REC SPEED
– – : – – – –
– – : – – – –
– –
– –
6 To enter the recording’s start time, press o or p until
the hour appears. Press B.
Press o or p until the minute appears. Press B.
Finally, press o or p to point to AM or PM. AM or
PM will flash beside the start time. Press B.
7
8
Repeat the procedure in step 6 to set the recording’s end time.
Press o or p until the channel number appears.
Then, press B.
● If you are using a standard antenna/Cable TV hookup (as shown on page eight), select the channel of the TV program you want to record.
● If you are recording from other equipment, select L 1 or
L2. To determine L 1 or L2, refer to the Helpful Hint below.
● If you are using a Cable Box/Satellite Receiver, select the
Cable Box/Satellite Receiver output channel (03 or 04).
Then, at the Cable Box/Satellite Receiver, select the channel you want to record. Leave the Cable Box/Satellite
Receiver on for the timer recording.
Details are on page nine.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 4 SUN
START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
CHANNEL 16
REC SPEED – –
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
STOP
DVD
DISC
MENU
VCR
OK
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
PLAY
5-8
Helpful Hints
• Enter the information while the space is flashing.
• To stop a started timer recording,
press STOP/EJECT C A on the front of the DVD/VCR.
More Helpful Hints are on page 76.
Instructions continue on page 38.
38 Timer Recording (cont’d)
9 Press o or p to select a recording tape speed. The arrow will appear beside your choice. The selected speed will flash beside REC SPEED. Details about tape speed are on page 72.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 4 SUN
START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
CHANNEL 1 6
REC SPEED S P
B SP
SLP
10
11
Press C-RESET/CLEAR to store the timer recording.
Press TIMER SET. The DVD/VCR will turn off and the red TIMER REC light will appear on the front of the
DVD/VCR. In some cases, the DVD/VCR will switch to
DVD mode instead. You may use the DVD Player during a timer recording.
If you want to use the VCR until time for the recording, don’t press TIMER SET until a few minutes before the recording should start. Or, press TIMER SET only when you know you won’t be using the VCR anymore (until after the recording). When the TIMER REC light is on, you cannot put the DVD/VCR in VCR mode by pressing
VCR or OUTPUT. You must first press TIMER SET to cancel the timer recording temporarily. Then, you can use the VCR features again.
Cancelling Timer Recordings
1
2
3
4
Press VCR, then press DISC/MENU.
Press o or p to select TIMER PROGRAMMING,
then press B.
Press o or p to find the program you want to cancel.
While the program number is flashing, press s to clear all the information for that program.
ONE TIME PROGRAM
PROGRAM NUMBER
DATE
1
05/04 SUN
START TIME
END TIME
CHANNEL
REC SPEED
07:30
08:30
16
SP
PM
PM
5 Press C-RESET/CLEAR to remove the menu.
11
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP
1
4
REW FF
2
5
PAUSE
SPEED
3
6
SLOW
PLAY
9
10
Helpful Hints
• If you are recording from other equipment, set CHANNEL to L 1 or L2. If you connected the other equipment to the AUDIO and
VIDEO In jacks on the front of the
DVD/VCR, choose L2. If you connected the audio and video cables to the AUDIO IN and VIDEO IN jacks on the back of the
DVD/VCR, choose L 1.
• To change incorrect information, press s or B to choose the item
you want to change. Press o or p to adjust the information.
• If a timer recording is set and the
TIMER REC light is on, pressing
STOP/EJECT C A will turn on the
DVD/VCR and/or cancel the timer recording. The TIMER REC light will turn off. Press STOP/EJECT
C A again to remove the tape.
Remember to insert a tape and press TIMER SET to reset the timer recording.
• If there is no tape in the VCR when you press TIMER SET, the
TIMER REC light will flash. Insert a tape.
DVD to Videotape Duplication 39
Follow the steps below to copy a DVD to a videotape. This will be possible only if the DVD is not copy protected.
Before you begin:
● Put a videotape in the cassette compartment. Make sure the tape’s record tab is intact and the tape is long enough to record
● the DVD.
Put the DVD you want to copy in the disc tray.
● Press VCR so the green VCR light appears on the front of the
DVD/VCR.
● Turn on the TV.
3,5
4
1 Point the remote control at the DVD/VCR. Press Number
buttons 0, 0, 3. “DISC” will appear on the TV screen.
DISC 6
5
REW FF
1
4
7
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
+10 0
2
1
2 Press SPEED until the desired tape speed (SP or
SLP) appears briefly on the screen. Details about tape speed are on page 72.
3
4
5
Press REC I to start recording. The red REC light will appear on the front of the DVD/VCR.
Press DVD. Press PLAY B to play the disc.
To pause the recording, press VCR, then press PAUSE k once. The red REC light will flash. To resume record- ing, press REC I or press PAUSE k again. The red
REC light will come on again.
6 To stop recording, press VCR, then press STOP C.
STOP
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK 5,6
PLAY
Helpful Hint
• A timer recording is not possible during DVD to videotape duplication.
40 Repeat Play
Follow the steps below to play a videotape repeatedly.
1 Press VCR, then press DISC/MENU.
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
[ON]
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
1
2 Press o or p to select AUTO REPEAT.
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
[ON]
3 Press B so ON appears next to AUTO REPEAT.
Tape playback will begin immediately. AUTO REPEAT B will appear on the TV screen briefly.
(If you are fast forwarding or rewinding the tape, press C-
RESET/CLEAR to remove the menu, then press PLAY B to begin tape playback.)
The tape will play to the end, rewind, then play again. (TV programming will appear on the screen while the tape is rewinding.)
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [ON]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
[ON]
2,3
STOP PLAY
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
Helpful Hint
• To cancel AUTO REPEAT, follow steps 1-2. At step 3, press B so OFF appears beside AUTO
REPEAT. Press C-RESET/CLEAR.
Follow the steps below to reset the VCR’s real-time tape counter to zero at a tape location you want to refer to later.
1
2
Press VCR, then play, fast forward, or rewind a tape to the location that you would like to refer to later.
Press STOP C to stop the tape.
Press DISPLAY to see the status display.
STOP
3
2,4
Tape Counter 4 1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
1
SLP 1 : 23 : 45 HIFI
STOP PLAY
4
3 While the counter is on the screen, press
C-RESET/CLEAR to reset the counter to zero.
STOP
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
SLP 0 : 00 : 00 HIFI
4 When you later want to return to this point on the tape, press DISPLAY so you can see the counter
(while tape play is stopped). Press REW h or FF g .
As the tape rewinds or forwards, watch the counter.
When it reaches zero, press PLAY B to play the tape.
Helpful Hints
• You may only set the counter to zero at one location at a time.
Setting the counter to zero at a second location will erase the previous zero setting.
• If you remove the tape, the counter will reset to zero at the point at which you last stopped playback whenever you reinsert the tape.
42 Time Search, Index Search
Time Search
Follow the steps below to search forward or backward on a tape a specific length of time. There must be a tape in the cassette compartment.
1 Press VCR, then press SEARCH MODE until the
TIME SEARCH screen appears.
TIME SEARCH
- : - -
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
1
2 Within 30 seconds, press o or p until your desired
length of time appears. Or, press and hold o or p until
2-3 you reach the desired length of time.
You can set a Time Search for up to 9 hours and 59 minutes
(9:59).
3 Within 30 seconds, press s (for a reverse search) or B
(for a forward search). The VCR begins rewinding or fast forwarding the tape. When the tape finishes rewinding or fast forwarding the time you specified, playback will begin.
The time will count down beneath TIME SEARCH during the search.
If the end of the tape is reached during the search, the search will stop and the tape may rewind. Details are on page 44.
Index Search
An Index Mark is made automatically at the beginning of each recording. Essentially, an Index Mark is a “bookmark.” Find the start of a recording by following these steps.
1 Press VCR, then press SEARCH MODE until the
INDEX SEARCH screen appears.
INDEX SEARCH
_ _ 2-3
2 Within 30 seconds, press o or p until the number of programs you want to skip appears beneath INDEX
SEARCH. Include the current program in your number.
3 Within 30 seconds, press s (for a reverse search) or B
(for a forward search). When the tape finishes rewinding or forwarding, playback will start. The program numbers will count down beneath INDEX SEARCH during the search.
If the end of the tape is reached during the search, the search will stop and the tape may rewind. Details are on page 44.
Recordings should be at least one minute long in SP speed, two minutes in LP, and three minutes in SLP. Otherwise, the
Index Mark will not be available. Details on tape recording speeds are on page 72.
STOP PLAY
REW FF
1
4
7
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
+10 0
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
1
STOP PLAY
REW FF
1
4
7
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
+10 0
Helpful Hints
• Time Search and Index Search are not available during recording.
• To remove a Search display, press
C-RESET/CLEAR.
• To cancel a search, press STOP C .
Special Effects Playback 43
● Before you begin, press VCR so the green VCR light appears on the front of the DVD/VCR.
Forward and Reverse Searching (SP/LP/SLP)
1 During tape playback, press and release FF g or
REW h. A fast forward or reverse picture search will begin.
2 To return to playback, press PLAY B.
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
Super High Speed Searching (LP/SLP)
1 During tape playback, press FF g or REW h,
then press again. The search speed will increase.
Repeatedly pressing FF g or REW h will switch between regular and high speed searching.
2 To return to normal playback, press PLAY B.
Viewing a Still Picture
1
2
3
During tape playback, press PAUSE k. A still picture will appear on the screen.
To advance the still picture one frame at a time,
press PAUSE k repeatedly.
To release the still picture and return to playback,
press PLAY B.
STOP PLAY
4
7
REW
1
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
Viewing a Slow Motion Picture
1
2
During tape playback, press SLOW. The tape will play in slow motion.
To return to normal playback, press PLAY B.
Helpful Hints
• Slow and Still modes will switch to
Stop mode after five minutes to protect the DVD/VCR and the tape from damage.
• SP/LP/SLP means this feature will work with tapes recorded in
Standard Play, Long Play, or Super
Long Play. LP/SLP means this feature will work with tapes recorded in Long Play or Super Long Play.
Tape speed details are on page 72.
44 Automatic Operation Features
The following tape features are available in VCR mode. Press VCR so the green VCR light is on, if necessary.
Automatic Playback
When you put a tape in the DVD/VCR, the power will come on. If the tape’s record tab is missing, playback will begin.
If a timer recording is set and the TIMER REC light is flashing, the power will not come on automatically when you insert a tape with the record tab intact.
If a timer recording is set and the TIMER REC light is flashing, the
DVD/VCR will eject the tape if the record tab is missing.
Automatic Rewind, Eject
When a tape is played, fast forwarded, or recorded to its end, the tape will rewind to the beginning, stop, and eject.
This feature does not operate if AUTO REPEAT is ON. Details are on page 40.
Tape Eject
A tape can be ejected with the DVD/VCR power on or off (but the DVD/VCR must be plugged in).
If a timer recording is set and the TIMER REC light is on, pressing
STOP/EJECT C A will turn on the DVD/VCR and/or cancel the timer recording. The TIMER REC light will turn off. Press
STOP/EJECT C A again to remove the tape. Remember to insert a tape and press TIMER SET to reset the timer recording.
Automatic Tracking Adjustment
The VCR adjusts tracking automatically to give you the best possible picture quality. With some recordings, however, you may get a better picture using manual tracking (see below).
Manual Tracking
To manually adjust the tracking during normal playback and slow motion playback of a videotape, press SKIP i /CHo or
SKIP j /CHp on the remote.
Tracking will return to Automatic Tracking when you press STOP
C or insert a tape.
Furthermore, you can press SKIP i /CHo or SKIP j /CHp to remove vertical jitter in a Still picture.
Before
Tracking
Adjustment
After
Tracking
Adjustment
Multi-Channel Television Sound 45
Your DVD/VCR can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from the left and right audio channels. Your DVD/VCR also can play tapes recorded in a second audio
(usually, that means your program is recorded in a second language). Of course, your DVD/VCR will play tapes recorded in monaural (single-source) sound as well.
Your DVD/VCR also will record a video cassette in Hi-Fi stereo or in second audio, so when you play that tape on the DVD/VCR, it will be in stereo or second audio.
Read the directions on this page to familiarize yourself with the stereo and second audio setups.Then follow the directions on page 46 to record in stereo or second audio, or follow the directions on page 47 to play tapes recorded in Hi-Fi stereo.
Understanding Displays
When you watch TV channels through the DVD/VCR, portions of the display shown below will appear when you press DISPLAY twice.
STOP 12:00 AM
CH 02
STEREO
SAP
If SAP or STEREO appears, the program is available in second audio or stereo.
Even though a program is available in second audio or stereo, you must program the DVD/VCR to receive or record the program. Follow the directions on page 46.
This display is not available during tape playback.
SLP
To play programs in stereo, connect the DVD/VCR to a Stereo or TV as described on pages 11 and 14.
You will use the red and white AUDIO OUT jacks on the DVD/VCR.
46 Multi-Channel Television Sound (cont’d)
To set the DVD/VCR to receive programs in stereo or second audio, follow these steps.
1 Press VCR, then press DISC/MENU.
2
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
[ON]
Press o or p to select TV STEREO or SAP (Second
Audio Program). Press B so ON appears beside your selection.
3
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
B
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
[ON]
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP PLAY
4
7
REW
1
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
1
2
3 Press DISC/MENU to remove the menu.
Helpful Hints
• You can only receive and record in stereo or second audio programs that are broadcast in stereo or second audio. You can only play in stereo or second audio tapes that were recorded in stereo or second audio. Please see page 45 to determine if the program is in stereo or second audio.
• If SAP is ON but the program is not broadcast in Second Audio, you will hear and record the program in normal audio.
Hi-Fi Stereo 47
Multi-Channel Television Sound system broadcasts are recorded in Hi-Fi stereo. To play in Hi-Fi stereo the tapes recorded in Hi-Fi stereo, follow these steps.
1 Press VCR, then press DISC/MENU.
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
[ON]
2 Press o or p to select AUDIO OUT.
Then, press B.
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
B AUDIO OUT
TV STEREO
SAP
[ON]
4
2-3
TIMER SET
STOP
DVD
DISC
MENU
DISPLAY
STANDBY-ON
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT REPEAT
A-B
TITLE
C-RESET
CLEAR
MODE RETURN
SKIP/
CH
VCR
OK
PLAY
4
7
REW
1
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
3 Press o or p to select HIFI. ON will appear beside
HIFI.
B HIFI
MONO
AUDIO OUT
[ON]
1
4 Press DISC/MENU to remove the menu.
Helpful Hints
• Programs are recorded in both Hi-
Fi stereo sound and in monaural sound.
• The audio level of a tape recorded in Hi-Fi stereo will differ from the audio level of a tape not recorded in Hi-Fi stereo.
• You can change to MONO if you want monaural audio playback.
Follow steps 1-2, then press o or p to select MONO. Press
DISC/MENU. HIFI will disappear from the status display.
• If you play non-Hi-Fi tapes while
AUDIO OUT is set to HIFI, HIFI will not appear on the status display. The tape will play in monaural sound.
Please see additional notes on page 77.
48 DVD Disc Menus
DVDs contain menus that describe the contents of the DVD or allow you to customize DVD playback. For example, the menu may offer choices for subtitle languages, special features, or scene selection. To use the DVD Disc menu and select playback features, follow these steps.
1
2
3
Press DVD to put the DVD/VCR in DVD mode.
Press DISC/MENU. The DVD’s main Disc menu will appear.
Press o, p, s, or B to select an item, then press
OK. Continue this process to set up all the features you want.
1
2
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK 3
STOP
REW FF
PLAY
PAUSE
Using the Title Menu
Some DVDs have a Title Menu, which lists the Titles available on the DVD. Use the Title Menu to start playback at a specific Title.
1
2
Press DVD.
Press TITLE. The Title menu will appear.
If a Title menu is not available, the “X” may appear on the
TV screen. Or, if the DVD only has a main Disc menu as described above, it may appear when you press TITLE.
3 Press o, p, s, or B to select a Title, then press
OK. Playback will begin at the Title you selected.
2
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK 3
STOP
REW FF
PLAY
PAUSE
Helpful Hints
• Menus vary among DVDs. Follow the information accompanying the
DVD.
• Not all DVDs have Title menus.
• Some DVDs may refer to Chapters as “scenes.” Some DVDs may refer to the Title Menu as the “scene index.”
• The TITLE button will not be active with all DVDs.
Fast Forward/Reverse Search 49
1 Press DVD to put the DVD/VCR in DVD mode. The red
DVD light will appear on the front of the DVD/VCR.
2 During playback, press FF g or REW h.
Use FF g for a forward search. Press REW h for a reverse search.
● During DVD playback, pressing FF g or REW h will forward or reverse the picture at two, eight, 50, or 100 times the normal playback speed.
An h 2, h 8, h 50, or h 100 will appear briefly on the TV screen to indicate reverse searching.
Or, g 2, g 8, g 50, or g 100 will appear briefly on the TV screen to indicate fast forward searching.
●
Sound will be muted during searching.
During Audio CD playback, you may search only at 16 times the normal playback speed. An h 16 or g 16 will appear briefly on the TV screen. Sound will be inter-
● mittent during searching on an Audio CD.
During MP3 playback, you can search at only eight times the normal speed. An h 8 or g 8 will appear briefly on the TV.
E 2
1
2
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT REPEAT
A-B
TITLE
C-RESET
CLEAR
MODE RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP
REW FF
1
4
7
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
+10 0
PLAY
3
Example: Playing a DVD in reverse at twice the normal playing speed.
3 Press PLAY B to return to normal playback.
50 Title/Chapter Playback, Specific Time Playback
Specific Title/Chapter Playback
1
2
With a DVD in the DVD/VCR, press DVD.
During DVD playback, press SEARCH MODE until
CH (for Chapter) or TT (for Title) appears on the TV screen. The number of available Titles or Chapters will appear at the right ( /4, for example).
3 Enter the Title or Chapter number using the
Number buttons. The selected Title or Chapter will start to play.
12/17 4 / 4
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT REPEAT
A-B
TITLE
C-RESET
CLEAR
MODE RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
3
STOP PLAY
REW
1
4
7
+10
FF
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
2
Specific Time Playback
1
2
Press DVD to put the DVD/VCR in DVD mode.
During DVD or Audio CD playback, press SEARCH
MODE until the Time Search display appears.
-:- -:- - TOTAL 1:29:00 1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
3 Within 30 seconds, use the Number buttons to enter the elapsed playing time (of the Track or
Title) at which you want playback to begin. Enter the time in hours, minutes, and seconds. Within a few seconds, playback will start at the specified time.
● Example: 1 hour, 23 minutes, and 30 seconds
1 → 2 → 3 → 3 → 0
● Make sure the time you enter is within the total time of the current Title or Track. If it is not, the time space will clear and playback will continue at its current point. The total time available in the current Track or Title will appear in the Time Search display.
● If you make a mistake entering the time, press C-
RESET/CLEAR to clear the time area. Enter the correct information.
STOP PLAY
REW FF
1
4
7
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
+10 0
3
2
Helpful Hint
• Title/Chapter playback is not available with some DVDs.
There are three ways to begin playback on an Audio CD at a specific Track: Use the Number buttons, the SEARCH MODE button, or
SKIP i /CHo and SKIP j /CHp.
● Before you begin, press DVD so the red DVD light appears on the front of the DVD/VCR.
A
Using the Number Buttons
Press the Number buttons to enter a Track number.
Playback will start at the selected Track.
For single-digit Tracks ( 1-9), press a single Number button.
For Tracks 10 and above, press the +10 button so the Search display (TR - - ) appears on the TV. Press the Number button of the first digit, then press the Number button of the second digit.
For example, to play Track 26, press + 10, then Number 2, then
Number 6.
If you enter a Track number that is not available on the Disc, playback will not begin (or the current Track will continue to play).
B
Using SEARCH MODE
Press SEARCH MODE so the Track Search display (TR) appears. Within 30 seconds, press the Number buttons to
select the Track number. Playback will begin at the selected
Track. For a single-digit Track ( 1-9), enter a zero first. For example, to play Track 5, press 0, 5. You do not have to use the + 10 button in Search Mode.
A,B
Track Playback 5 1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP PLAY
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
C
B
C
Using SKIP i /CHo or SKIP j/ CHp
During playback, press SKIPi /CHo to skip the current
Track and move to the next Track. The Track number will appear briefly on the DVD/VCR display panel.
During playback, press SKIP j/ CHp to return to the beginning of the current Track or press repeatedly to go
to previous Tracks. The Track number will appear briefly on the DVD/VCR display panel.
Helpful Hint
• You cannot use SKIPi /CHo to go from the last Track on the Disc to the first Track.
52 Paused and Step-by-Step Playback, Resume
Paused and Step-by-Step Playback
1
2
3
Press DVD.
During DVD or Audio CD playback, press PAUSE k . Play will pause and the sound will be muted.
When playing a DVD, press PAUSE k repeatedly to see the picture advance one frame (or step) at a
time. The sound will remain mute.
Pressing PAUSE k repeatedly during Audio CD, MP3, or
JPEG playback will have no effect.
4 Press PLAY B to resume playback.
1
2-3
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP PLAY
REW FF
1
4
7
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
+10 0
4
Resume
1
2
Press DVD.
Press STOP C during DVD or Audio CD playback.
In a few seconds, the following Resume message will appear on the TV screen. (The file list will appear during
MP3 or JPEG playback.)
Press 'PLAY' to play from here.
To play the beginning, press 'STOP' first and then 'PLAY'.
3 Press PLAY B. In a few seconds, play will resume from the point at which it stopped last. You can resume play at the same point even if you turn off the DVD/VCR, then turn it on again later. However, opening the disc tray will cancel the Resume feature. Play will start at the beginning the next time you insert the Disc.
To cancel Resume and start playing the Disc from the beginning, press STOP C a second time while playback is stopped.
The Stop symbol (C) will appear briefly on the TV screen.
Press PLAY B to start playing the Disc from the beginning.
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT REPEAT
A-B
TITLE
C-RESET
CLEAR
MODE RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
1
2
STOP
REW
1
4
7
+10
FF
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
PLAY
3
Repeat
1
2
Press DVD to put the DVD/VCR in DVD mode.
During DVD or Audio CD playback, press REPEAT
until the repeat mode you want appears on the TV.
On a DVD, select CHAPTER, TITLE, or OFF. On an
Audio CD, select TRACK, ALL (all Tracks on the Disc), or
OFF. Selecting a new Track, Chapter, or Title will cancel repeat playback.
Repeat, A-B Repeat 53
2
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP
REW
PAUSE
FF
PLAY
Example: Repeat a
DVD Chapter
Example: Repeat an
Audio CD Track
A-B Repeat
Follow these steps to play a section of a DVD or Audio CD repeatedly.
1
2
3
Press DVD.
Press PLAY B to play the Disc to the point at which you want repeated playback to begin.
Press A-B REPEAT to set the starting point (A).
A - will appear on the TV screen.
4 Play or fast forward the Disc to the point at which you want repeated playback to end, then press A-B
REPEAT again. A-B will appear on the TV. The section will begin to play repeatedly.
1
5 To cancel A-B Repeat, press A-B REPEAT. OFF will appear on the TV screen. Regular playback will resume.
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
STOP
DVD
DISC
MENU
REW
DISPLAY
PAUSE
STANDBY-ON
VCR
OK
FF
PLAY
3-5
2
Helpful Hints
• Repeat playback and A-B Repeat are not available with all Discs.
• The entire A-B Repeat section must be within a single Title or Track. If you do not enter Point B before the end of the Track or Title is reached, the end of the Track or Title will become Point B automatically.
• Point B must be later on the Disc than Point A.
54 Markers
Use Markers to remember your favorite places on an Audio CD or DVD. To set the Markers, follow these steps.
● Before you begin, place the DVD/VCR in DVD mode. Press
DVD so the red DVD light appears on the front of the
DVD/VCR.
1 Play the Disc to within 30 seconds prior to the point at which you want to set the Marker. During playback,
press SEARCH MODE until the Markers appear at the top of the TV screen.
-- --:--:--
2
3
Within 30 seconds, press s or B to select a Marker
( 1-10). Make sure _ : _ _ : _ _ appears beneath the number.
Let the Disc play to the point at which you want to set the Marker (up to 30 seconds away).
When the Disc reaches the point you want to
remember, press OK. The Title number and elapsed playing time (DVD) or Track number and its elapsed playing time (Audio CD) will appear.
1 0:12:01
STOP
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
3-4
2,4
PLAY
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
1,4
4 To return to a Marker during playback, press
SEARCH MODE until you see the Markers.
Press s or B to choose the Marker you want, then
press OK. Disc play will continue from the marked point.
Helpful Hints
• Opening the disc tray or turning off the DVD/VCR will erase all the
Markers.
• To erase a single Marker, press
SEARCH MODE until you see the
Markers. Press s or B to select a Marker. Press C-RESET/CLEAR.
Press RETURN or SEARCH MODE to remove the display.
• To erase all the Markers, press
SEARCH MODE until you see the
Markers. Press B to select AC, then press OK. Press SEARCH
MODE or RETURN to remove the display.
Subtitles, Camera Angles 55
Subtitles
You can select a language for DVD subtitles during playback. You can select only languages that are available on the DVD.
1
2
Press DVD.
During playback, press SUBTITLE to select a subti-
tle language. The number of available languages appears at the right of the subtitle display. In the example below, six languages are available ( /6). After a few seconds, the subtitles will appear.
Or, press SUBTITLE to turn off subtitles.
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
2
STOP
REW
PLAY
FF
PAUSE
Camera Angles
Some DVDs contain scenes recorded from different angles. The camera angle will not change if the DVD does not contain sequences recorded from different camera angles.
1
2
Press DVD.
During playback, press ANGLE to select a different
angle. The number of available angles appears at the right of the Angle display. In this example, eight angles are available ( /8).
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
2
STOP PLAY
Helpful Hints
• On some DVDs, you must select a subtitle language in the Disc menu.
• If the language does not appear after pressing SUBTITLE several times, the Disc does not have subtitles in that language.
• Opening the disc tray will cancel your subtitle setting.
• If the current portion of the Disc has multiple camera angles, will appear on the TV screen. ANGLE
ICON must be ON. Details are on pages 64-65.
56 Parental Controls Password
Parental Controls prevents viewing of DVDs that exceed your rating limits. This feature will not limit viewing if the DVD is not rated or coded. Check your DVDs and settings before letting children access the DVD/VCR. Follow these steps to change your password.
1
2
Press DVD to put the DVD/VCR in DVD mode. The red
DVD light will be on. Press STOP C to stop Disc playback.
Press SETUP.
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
ON
OK
3 Press B to select CUSTOM, then press OK.
4
OK
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ORIGINAL
OFF
ENGLISH
PLAYER MENU ENGLISH
Press B to select (the lock), then press OK.
The first time you set a password, this menu will appear.
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
2,7
STOP
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
PLAY
3-5
4,6
Press the Number buttons to enter a four-digit pass-
word. The password will appear on the screen. Write it down so you don’t forget it.
Press OK. You are finished! Go to step 7.
If you have set a password before, this menu will appear.
Press the Number buttons to enter your current
four-digit password. Asterisks (*) will appear instead of your password. This protects its identity.
5 Press p to select CHANGE, then press OK.
PARENTAL
PARENTAL LEVEL
CHANGE
ALL
OK
6 Press the Number buttons to enter a four-digit pass-
word. The password numbers will appear on the screen.
Write down the password so you will not forget it. Press
OK. The previous menu will reappear.
7 Press SETUP to remove the menu.
Helpful Hints
• The default password is 4737. If you forget your password, press
Number buttons 4, 7, 3, 7 at step
4. You will be prompted to enter a new four-digit password. Use the
Number buttons to enter a new four-digit password, then press
OK. PARENTAL LEVEL will reset to
ALL. See page 57 to reset
PARENTAL LEVEL as you desire.
• A power failure will not erase your password.
Parental Levels 57
Follow these steps to set the rating level for your DVDs. DVDs whose ratings exceed the level you set will not play.
1 Press DVD to put the DVD/VCR in DVD mode. The red DVD light will be on. Press STOP C to stop Disc playback if necessary.
2 Press SETUP.
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
ON
OK
3 Press B to select CUSTOM, then press OK.
OK
LANGUAGE
AUDIO
SUBTITLE
ORIGINAL
OFF
DISC MENU ENGLISH
PLAYER MENU ENGLISH
STANDBY-ON
2,8 TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
1
3-4,
6-7
STOP
REW
1
DVD
DISC
MENU
DISPLAY
VCR
OK
5 4
7
PLAY
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0 +10
4 Press B to select (the lock), then press OK.
5
6
Press the Number buttons to enter your four-digit password.
Press o or p to select PARENTAL LEVEL, then press OK.
PARENTAL
PARENTAL LEVEL
CHANGE
ALL
OK
RATING
EXPLANATIONS
• ALL - Parental
Controls is inactive; all discs can play.
• 8 - Adult material
• 7 - NC1 7 - Not appropriate for children under 1 7
• 6 - R - Restricted; parental approval required for viewers under 1 8.
•
• 4 - PG 1 3 -
Unsuitable for children under 1 3
• 3 - PG - Parental
Guidance suggested.
1 - G - General
Audience; recommended for all ages.
7 Press o or p to select a level, then press OK. The rating levels continue on two menu screens. Press o or p repeatedly to move to the next or previous screen to find the rating level you want.
After making your selection, the previous menu will appear. The level you selected will appear beside
PARENTAL LEVEL.
OK
PARENTAL
PARENTAL LEVEL
ALL
8
7 [NC-17]
6 [R]
5
4 [PG13]
3 [PG]
8 Press SETUP to remove the menu.
Helpful Hints
• When you try to play a DVD whose rating exceeds the level you set, an on-screen message will indicate the
DVD cannot play. Remove the
DVD, then set PARENTAL LEVEL to
ALL. Reload the DVD and begin playback. Some DVDs may let you enter your four-digit password to begin playback. Follow the on-screen messages as prompted.
• You cannot use the default password (4737) to play a DVD.
58 Audio Language, Stereo Sound Mode
Audio Language
You can select a language for DVDs during playback if multiple languages are available.
1
2
Press DVD to put the DVD/VCR in DVD mode if necessary. The red DVD light will be on.
During DVD playback, press AUDIO repeatedly to
choose one of the available languages. The new audio will be heard. The display will disappear after about five seconds.
The Audio display may show if the DVD has Dolby Digital or multi-channel (5.
1 CH) sound or its sampling rate (48 k, for example). The number of available languages appears after the “ / ” at the right of the display ( /3, for example).
2
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP
REW FF
PLAY
PAUSE
1.ENG DolbyD 5.1CH 48k/3
Example: English audio
Stereo Sound Mode
If you connected the DVD/VCR to a Stereo or TV using the
COAXIAL DIGITAL AUDIO OUT jack as described on page
15, you cannot adjust Stereo Sound Mode. Otherwise, adjust
Stereo Sound to determine whether you will hear the left channel, the right channel, or both channels (stereo) during
Audio CD playback.
1 Press AUDIO during Audio CD playback to choose STEREO, L-CH, or R-CH.
STEREO
Both right and left channels are heard (stereo).
L-CH
Only the left channel is heard.
R-CH
Only the right channel is heard.
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP
REW
PAUSE
FF
PLAY
Helpful Hints
• If a language is not available after pressing AUDIO several times, the
DVD does not have that language.
• Some DVDs only let you change the language in the Disc menu.
• Audio languages may be abbreviated (such as ENG for English).
Or, three dashes (- - -) may appear instead of an abbreviation.
• You cannot adjust the Stereo
Sound Mode when Virtual
Surround is active. Details are on page 70.
1/2
DVD Slow Motion, Zoom 59
Slow Motion
1
2
Press PAUSE F during DVD playback.
Press FF D or REW h. Slow motion playback will begin. Press FF D or REW h repeatedly during slow motion playback to play the DVD forward or backward at
1/16, 1/8, or 1/2 the normal speed.
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
Example: Playing a DVD forward at half the normal speed.
3 Press PLAY B to return to normal playback.
1
STOP
REW
1
4
FF
2
5
PAUSE
SPEED
3
6
SLOW
PLAY
3
2
Zoom
You can enlarge the DVD picture to two or four times larger than normal. STANDBY-ON
TIMER SET
1 Press ZOOM during playback or when play is
paused. The picture will appear twice as large. Press
ZOOM again to make the picture four times as large as normal. Either x2 or x4 will appear beside the zoom icon on the TV screen.
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
2 While the picture is enlarged, press o, p, s, or B to move the zoomed image up, down, left, or right.
The gray box with an inner blue box that shows during
Zoomed playback is the position guide. To remove it or show it, press OK. The position of the blue box inside the gray box indicates the position of the zoomed image within the overall picture.
3 To return the picture to normal, press ZOOM.
STOP
DVD
DISC
MENU
REW
DISPLAY
VCR
OK
FF
PLAY
2
PAUSE
1 2
4 5
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
1,3 7
+10
8
0
Helpful Hints
• The sound will be mute during slow motion playback.
• The SLOW button on the remote does not activate slow motion of
DVDs.
• The x4 zooming is not active with some Discs. Only x2 zooming is available for JPEGs.
60 Programmed Playback
You may determine the order in which Audio CD Tracks will play. You also can program MP3 or JPEG files to play in a special order. To set a Program, follow these steps.
1
2
Press DVD.
While playback is stopped, press MODE.
The PROGRAM screen will appear.
Audio CD example
3 Press o or p to select a track you want to play,
then press OK. Press C-RESET/CLEAR to erase the last
Track in the Program if you make an error.
Repeat this step until you have selected all the Tracks you wish to play in the Program.
4 Press PLAY B. The Tracks will play once in the order you set. Turning off the DVD/VCR or opening the disc tray will erase the Program.
1
3
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT REPEAT
A-B
TITLE
C-RESET
CLEAR
MODE
DVD
DISC
MENU
DISPLAY
VCR
OK
RETURN
SKIP/
CH
2
STOP PLAY
4
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
Helpful Hints
• You cannot use the Number buttons or SEARCH MODE to select another Track while playing a
Program. Use SKIP i /CHo
or SKIP j /CHp to select other Tracks within the Program.
• You cannot combine random playback with programmed playback.
• You may play a Program or a
Track within a Program repeatedly. During programmed playback, press REPEAT so ALL (all Tracks in the Program) or TRACK appears. The entire Program or the current Track will play over and over.
• You cannot alter a Program during playback.
• You can start Program play only while in the PROGRAM screen.
• A Program can have a maximum of 99 Tracks.
Random Playback 6 1
You may play the Tracks of an Audio CD in Random order instead of the order in which they are recorded ( 1,2,3...). You can also use this feature for JPEG and MP3 files.
1
2
Press DVD to put the DVD/VCR in DVD mode. The red DVD light will appear.
While playback is stopped, press MODE twice so the
RANDOM screen appears.
3
Example: Audio CD
While the RANDOM screen appears, press
PLAY B. The Tracks will play in random order. After all the Tracks have played once, playback will stop.
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
2
STOP PLAY
3
1
4
REW
7
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
62 MP3/JPEG Playback
1
2
The DVD Player will play MP3 or JPEG files that you record and finalize on a CD-RW (Compact Disc-Rewritable) or CD-R
(Compact Disc-Recordable).
These Discs may contain pictures in a JPEG format or audio Tracks in an MP3 format. For example, you may have photographic film developed by a retailer that places the pictures on a CD-R for you. These pictures may be in JPEG format.
Or, you may copy or download MP3 music files from certain legal
Internet sites, then copy those files onto a CD-R or CD-RW.
You cannot make or record such Discs using this DVD/VCR. See your computer manual for details on recording.
Keep these characteristics in mind when making Discs you intend to play on the DVD Player of this DVD/VCR.
● Record MP3 Tracks at a sampling frequency of 44.
1 kHz or
48 kHz. Use a bit rate between 112 kbps and 320 kbps.
● When recording JPEG Files, the size of the picture should be between 32 x 32 and 6300 x 5 100 dots.
1
2-3
4
TIMER SET
SKIP/
CH
TITLE
STOP
REC
REW
STANDBY-ON
SETUP AUDIO SUBTITLE ANGLE
DVD
DISC
MENU
REPEAT
C-RESET
CLEAR
MODE
DISPLAY
PAUSE
REPEAT
A-B
RETURN
SKIP/
CH
VCR
OK
FF
PLAY
Press DVD to put the DVD/VCR in DVD mode.
When you put a CD-RW or CD-R with MP3 or JPEG files in the DVD/VCR, the File List will appear on the TV screen. To see the File List during playback, press SEARCH
MODE. The current Track will be highlighted.
Press o or p to select a Folder, MP3 Track, or
JPEG File.
1
4
7
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
+10 0
3 If you choose a Track or File, press PLAY B or OK.
Starting with the Track or File you selected, the
Tracks/Files will play in the order they were recorded, i.e.
1, 2, 3,
If you select a Folder and press OK, the Tracks or
Files within that Folder will appear. Press K or L to select the Track or File you want, then press PLAY
B or OK.
● Choose FIRST PLAY to start play from the first individual File or Track listed.
● Press TITLE to return to the first item on the first MP3 or JPEG screen. You also can press { to return to previous screens.
● During JPEG playback, press MODE to choose a transition mode. For example, you can choose Cut in/Cut off or
Fade in/Fade out. Press MODE again to remove the transition modes.
4 To stop playback, press STOP C.
Helpful Hints
• JPEG images and MP3 Tracks are known as Files. Groups of Files are called Folders.
• JPEG Files have the icon.
• A maximum of 255 Folders can be recognized. A maximum of
256 Files can be recognized.
• MP3 Files have the 3 icon.
• During playback, press the
Number buttons to select another
Track. Or, press SKIP i
/CHo or SKIP j /CHp to change Tracks.
• If a Track is not available, “X” will appear on the TV screen. Play may resume at an incorrect Track or may continue with its current
Track.
• Specific Time playback is not possible with MP3 Tracks.
2
3
You can review MP3 and JPEG Track (File) information during playback.
● Before you begin, place the DVD/VCR in DVD mode. Press
DVD so the red DVD light appears on the front of the
DVD/VCR.
1
2
Press DISPLAY during playback. The current Track name will show on the TV screen.
Press DISPLAY again. The current Track number, total
Tracks available, and elapsed playing time of the current
Track will appear.
TR 2/25 0:01:15
MP3/JPEG Displays 63
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT REPEAT
A-B
TITLE
C-RESET
CLEAR
MODE RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
1-3
Or, the following may appear to indicate Repeat play.
TRACK: The current Track will play repeatedly.
GROUP: Tracks in the current Folder will play repeatedly.
ALL: All Tracks will play repeatedly.
3 Press DISPLAY again to remove the display.
STOP PLAY
4
7
REW
1
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
64 Display
You can change the TV Aspect, Angle Icon, and Automatic Power
Off features of the DVD Player in the Display menu.
1
2
Press DVD to put the DVD/VCR in DVD mode.
When playback is stopped, press SETUP. The
QUICK SETUP screen will appear.
OK
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
ON
2
3-4
1
3 Press B to select CUSTOM at the top of the menu, then press OK.
OK
LANGUAGE
AUDIO
SUBTITLE
ORIGINAL
OFF
DISC MENU ENGLISH
PLAYER MENU ENGLISH
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
STOP PLAY
4
7
REW
1
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
4 Press s or B to select (display), then press OK.
DISPLAY
TV ASPECT 4:3 LETTERBOX
ANGLE ICON ON
AUTO POWER OFF ON
OK
5 Press o or p to select an item, then press OK.
● If you selected TV ASPECT, press o or p to select a setting, then press OK.
Choose 4:3 LETTER BOX if you want to see the entire, widened picture with black bars at the top and bottom of the screen.This looks like the picture you see when watching movies in a theater. This setting is possible only if the DVD was recorded in the letterbox or widescreen format.
Choose 4:3 PAN & SCAN for a full height picture, with both sides trimmed. Some companies refer to this as reformatting the picture to fit your TV screen and may call it the regular or normal format.
Choose 16:9 WIDE if a widescreen TV is connected to the DVD/VCR.
● If you selected ANGLE ICON, press OK repeatedly to turn ANGLE ICON ON or OFF. The default setting is ON. Choose ON to see the Angle icon when multiple camera angles are available during
DVD playback. Details are on page 55. Choose OFF to disable the Angle icon.
● If you selected AUTO POWER OFF, press
OK repeatedly to set AUTO POWER OFF to ON or OFF. The default setting is ON. Choose ON if you want the DVD/VCR to switch to VCR mode automatically if there is no activity at the DVD Player for 35 minutes.
OK
DISPLAY
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
TV ASPECT
OK
DISPLAY
TV ASPECT 4:3 LETTERBOX
ANGLE ICON ON
AUTO POWER OFF ON
ANGLE ICON
OK
DISPLAY
TV ASPECT 4:3 LETTERBOX
ANGLE ICON ON
AUTO POWER OFF ON
AUTO POWER OFF
6 Press SETUP to remove the menus.
Display (cont’d) 65
6
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT REPEAT
A-B
TITLE
C-RESET
CLEAR
MODE RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
5
STOP PLAY
4
7
REW
1
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
Helpful Hints
• Selecting a different TV ASPECT setting is only effective if it is available on the DVD. Check the DVD
Disc menu or case for details.
• You also can adjust TV ASPECT in the QUICK SETUP menu that appears when you first press the
SETUP button. With QUICK
selected, press OK. Press p to select TV ASPECT, then press OK.
Press o or p to choose a setting, then press OK. Press SETUP to remove the menu.
66 Language
You can use the LANGUAGE settings to select different languages for the Audio or Subtitles of DVDs, as well as languages for DVD
Disc menus and the menus of the DVD Player SETUP menus.
1
2
Press DVD to put the DVD/VCR in DVD mode.
While playback is stopped, press SETUP. The
QUICK SETUP screen appears.
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
ON
OK
3 Press B to select CUSTOM at the top of the menu, then press OK.
4 The Language menu ( ) will be selected. Press OK.
5 Press o p to select AUDIO, SUBTITLE, DISC
MENU, or PLAYER MENU. Then, press OK. The language options for the selected item will appear.
AUDIO: The DVD’s audio plays in the selected language.
OK
LANGUAGE
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
SUBTITLE: Subtitles appear in the chosen language.
OK
LANGUAGE
SUBTITLE
OFF
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OK
LANGUAGE
DISC MENU
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
DUTCH
OK
LANGUAGE
PLAYER MENU
ENGLISH
FRANCAIS
ESPANOL
DISC MENU: A DVD’s Disc menu appears in the chosen language.
PLAYER MENU: The DVD
Player’s Setup menu can be in
English, French, or Spanish only.
STANDBY-ON
TIMER SET
2
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
1
3-5
STOP
DVD
DISC
MENU
DISPLAY
VCR
OK
PLAY
REW FF
1
4
7
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
+10 0
Helpful Hints
• If the DVD’s default settings for
Audio and Subtitle are the same language, the subtitles may not show unless you turn them on.
• Use the AUDIO and SUBTITLE buttons to select Audio and
Subtitles available on the DVD.
Details are on pages 55 and 58.
• If you set AUDIO to ORIGINAL, the default setting of the DVD
Audio will play.
• If you set PLAYER MENU to
French or Spanish and need
English: Follow steps 1-3. At step
4, the IDIOMA or LANGUE menu will appear. Press OK.
Press p to select MENU DU
LECTEUR or MENU REPRO-
DUC., then press OK. Press o to select ENGLISH, then press
OK. The menus will change to
English. Press SETUP to remove the menus.
• You can change the PLAYER
MENU language in the QUICK
SETUP menu that appears when you first press SETUP. With
QUICK selected, press OK. PLAY-
ER MENU will be selected. Press
OK. Press o or p to choose a language, then press OK. Press
SETUP to remove the menu.
Language (cont’d) 67
6 Press o or p to select a language, then press
OK. The language list continues on multiple screens.
Press o or p to move to the other screens.
● If you select OTHER for AUDIO, SUBTITLE, or
DISC MENU, press four Number buttons to enter the code for the language you desire. Use the
Language Codes below. The language or language code you select will appear in the Language menu beside AUDIO, SUBTITLE, or DISC MENU.
7
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
LANGUAGE
LANGUAGE CODE
Please enter a 4-digit language code.
6
STOP PLAY
OK
7
● You can select other languages for AUDIO,
SUBTITLE, and DISC MENU only if the language is available on the Disc. If the language you select is not recorded on the DVD, changing these settings will have no effect.
Press SETUP to remove the menu.
4
7
REW
1
+10
FF
PAUSE
2
5
8
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
A-B
Abkhazian 4748
Afar 4747
Afrikaans
Albanian
4752
6563
Amharic
Arabic
4759
4764
Armenian 547 1
Assamese 4765
Aymara 477 1
Azerbaijani 4772
Bangla
Bashkir
Basque
Bengali
4860
4847
5 167
4860
Bhutani
Bihari
5072
4854
Bislama
Breton
4855
4864
Bulgarian
Burmese
4853
597 1
Byelorussian 485 1
C-E
Cambodian 5759
Catalan 4947
Chinese
Corsican
7254
496 1
Croatian
Czech
Danish
Dutch
5464
4965
5047
6058
Language Codes
English 5 160
Esperanto 5 161
Estonian 5 166
F-H
Faroese
Fiji
Finnish
526 1
5256
5255
French
Frisian
5264
527 1
Gaelic (Scots) 5350
Galician 5358
Georgian
German
5747
505 1
Greek 5 158
Greenlandic 5758
Guarani
Gujarati
Hausa
Hebrew
5360
5367
5447
5569
Hindi 5455
Hungarian 5467
I-K
Icelandic 5565
Indonesian 5560
Interlingua 5547
Interlingue 555 1
Inupiak 5557
Irish
Italian
Japanese
Javanese
5347
5566
5647
5669
Kannada
Kashmiri
Kazakh
5760
5765
5757
Kinyarwanda 6469
Kirghiz 577 1
Kirundi
Korean
Kurdish
6460
576 1
5767
L-N
Laothian
Latin
Latvian
Lettish
586 1
5847
5868
5868
Lingala 5860
Lithuanian 5866
Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese
Maori
5966
5955
Marathi 5964
Moldavian 596 1
Mongolian 5960
Nauru
Nepali
6047
605 1
Norwegian 606 1
O-R
Occitan
Oriya
6 149
6 164
Oromo (Afan)6 159
Panjabi
Pashto
Persian
Polish
Pushto
Quechua
6247
6265
5247
6258
Portuguese 6266
6265
6367
Rhaeto-Romance 6459
Romanian 646 1
Russian 6467
S
Samoan
Sangho
Sanskrit
6559
6553
6547
Serbian
Serbo-Croatian
6564
Sesotho
Setswana
Shona
6554
6566
6660
6560
Sindhi 6550
Singhalese 6555
Siswat
Slovak
Slovenian
Somali
6565
6557
6558
656 1
Spanish 5 165
Sundanese 6567
Swahili
Swedish
6569
6568
Yiddish
Yoruba
Zulu
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Volapuk
Welsh
Wolof
Xhosa
6658
6653
6647
6666
665 1
6654
486 1 Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
6655
666 1
6665
6664
6657
Twi
Ukrainian
U-Z
6669
Urdu
6757
6764
Uzbek 6772
Vietnamese 6855
686 1
497 1
696 1
7054
5655
7 161
7267
68 Audio
Change Audio settings based on other equipment you connected to the DVD/VCR or according to your Disc sound features.
These settings only affect the Disc Audio playback from the DVD
Player of the DVD/VCR.
1
2
Press DVD to put the DVD/VCR in DVD mode.
While playback is stopped, press SETUP. The
QUICK SETUP screen will appear.
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
ON
2,7
3-6
1
OK
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
3 Press B to select CUSTOM at the top of the menu, then press OK.
OK
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ORIGINAL
OFF
ENGLISH
PLAYER MENU ENGLISH
STOP PLAY
REW FF
1
4
7
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
+10 0
4
5
6
Press B to select AUDIO ( ) , then press OK.
Press o p to select DRC, DOLBY DIGITAL or
DOWN SAMPLING, then follow step 6 accordingly.
● If you selected DRC, press OK repeatedly to turn
Dynamic Range Control (DRC) ON or OFF. Choosing ON compresses the range of volume by suppressing loud sounds and raising low sounds.
● If you selected DOLBY DIGITAL, press OK repeatedly to select ON or OFF. Select ON if you used the COAXIAL
DIGITAL AUDIO OUT jack to connect the DVD/VCR to a stereo that is Dolby Digital compatible. Details are on page 15.
Otherwise, choose OFF.
● If you selected DOWN SAMPLING, press OK repeatedly to choose ON or OFF. Choose ON to set downsampling to
48 kHz. Choose OFF to set downsampling to 96 kHz.
7
OK
AUDIO
DRC
DOLBY DIGITAL
OFF
ON
DOWN SAMPLING ON
DRC
OK
AUDIO
DRC OFF
DOLBY DIGITAL ON
DOWN SAMPLING ON
Dolby Digital
Press SETUP to remove the menu.
OK
AUDIO
DRC
DOLBY DIGITAL
OFF
ON
DOWN SAMPLING ON
Down Sampling
Helpful Hints
• Dolby Digital sound must be available on the DVD.
• You can adjust DOLBY DIGITAL in the QUICK SETUP menu that appears when you first press
SETUP. With QUICK selected,
press OK. Press p to select
DOLBY DIGITAL. Press OK to choose ON or OFF. Press SETUP to remove the menu.
• When you play a Disc that has copyright protection, downsampling will be at 48 kHz, even if you set DOWN SAMPLING to
OFF.
On-Screen Displays 69
1
2
Press DVD to put the DVD/VCR in DVD mode.
Press DISPLAY repeatedly to see the following displays during DVD playback.
CH 7/49 0:01:46 - 0:03:27
CH (Chapter):
Current Chapter number
/ total Chapters
Elapsed playing time of the current Chapter; remaining playing time of the current Chapter
1
STANDBY-ON
TIMER SET
SKIP/
CH
TITLE
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
DVD
DISC
MENU
C-RESET
CLEAR
MODE
DISPLAY
REPEAT
A-B
VCR
OK
RETURN
SKIP/
CH
3
2-3
TT 1/2 0:00:00 - 1:23:45
TT (Title):
Current Title number
/ Total Titles
C L0
Elapsed playing time of the current Title; remaining playing time of the current Title
BIT RATE: The amount of audio and video data currently being read.
Layer number, appears only when playing a two-layered Disc.
L0: Layer 0 is playing
L1: Layer 1 is playing
Current Repeat setting, if active
C: Chapter repeat
T: Title repeat
A B: A-B repeat
STOP PLAY
4
7
REW
1
+10
FF
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
0
3 Press DISPLAY repeatedly or press RETURN to remove the display.
1
2
Press DVD to put the DVD/VCR in DVD mode.
Press DISPLAY repeatedly to see the following displays during Audio CD playback.
TR 4/12 0:03:21 - 0:02:15
TR (Track):
Current Track number
/ total Tracks
Elapsed playing time of the current Track; remaining playing time of the current Track
1
STANDBY-ON
TIMER SET
SKIP/
CH
TITLE
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
DVD
DISC
MENU
C-RESET
CLEAR
MODE
DISPLAY
REPEAT
A-B
VCR
OK
RETURN
SKIP/
CH
3
2-3
ALL 4/12 0:13:45 - 0:45:40 T
3
ALL:
Current track number
/ total Tracks
Current Repeat setting, if active
T: Track repeat
A: All Tracks repeat
A B: A-B repeat
Elapsed playing time of the current Audio CD; remaining playing time of the current Audio CD
Press DISPLAY repeatedly or press RETURN to remove the display.
STOP PLAY
REW FF
1
4
7
2
5
8
PAUSE
SPEED
3
SLOW
6
VCR/TV
9
ZOOM SEARCH MODE
+10 0
70 Black Level, Virtual Surround
Black Level
Adjust Black Level to brighten the DVD picture during playback.
1
2
Press DVD to put the DVD/VCR in DVD mode.
During DVD playback, press MODE so the Black
Level icon shows in the top left corner of the TV screen.
ON
3 Within 10 seconds, press OK repeatedly to choose
ON or OFF. ON brightens the dark parts of the picture.
OFF shows the original picture as recorded.
STANDBY-ON
TIMER SET
2
1
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DVD
DISC
MENU
DISPLAY
VCR
OK
3
STOP
REW FF
PLAY
PAUSE
Virtual Surround
You can enjoy improved stereo sound when you play DVDs,
Audio CDs, or MP3 files recorded in Dolby Digital or Pulse Code
Modulation (PCM). Check the Disc case for details on availability.
1
2
Press DVD.
During Disc playback, press MODE so the Virtual
Surround icon appears in the top left corner of the TV screen.
3 While the Virtual Surround icon appears, press OK to choose 1, 2, or OFF. The default setting is OFF.
The icon will disappear after about 10 seconds.
OFF
1
STANDBY-ON
TIMER SET
SKIP/
CH
SETUP AUDIO SUBTITLE ANGLE
REC REPEAT
TITLE
C-RESET
CLEAR
MODE
REPEAT
A-B
RETURN
SKIP/
CH
DISPLAY
DVD
DISC
MENU
VCR
OK
2
3
STOP
REW FF
PLAY
PAUSE
Helpful Hints
• Virtual Surround is available only when the DVD/VCR is connected to a Stereo using the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR.
• Virtual Surround is active only if you set Stereo Sound Mode to
Stereo. Details are on page 58.
Care and Maintenance 7 1
Cleaning the DVD/VCR
• Wipe the front panel and other exterior surfaces of the DVD/VCR with a soft, slightly damp cloth.
• Never use a solvent, thinner, benzene, or alcohol to clean the DVD/VCR. Do not spray insecticide liquid near the DVD/VCR. Such chemicals may discolor the surface or damage the DVD/VCR.
Cleaning a Disc
• Use a soft, dry cloth to wipe the Disc.
• Wipe the Disc in a straight line from the center to the edge. Never wipe the Disc in a circular motion.
• Do not use detergent or abrasive cleaning agents.
• Handle the Discs so fingerprints and dust do not adhere to the Discs.
• Always store the Disc in its protective case when it is not in use.
Checking the Laser
• If the DVD/VCR does not operate as described in this manual, the DVD Player’s laser may be dirty. Consult an Authorized Service Center for inspection and cleaning of the laser.
Caring for Video Cassettes
• Use only cassettes with the mark.
• Remove any light adhesive stick-on notes from the video cassette before putting the cassette in the VCR. Removable labels can jam the VCR.
Caring for the VCR’s Video Heads
• Periodic maintenance is required to maintain your DVD/VCR’s excellent performance. The VCR has an Automatic Head Cleaner. However, the video heads will require replacement eventually. Only an authorized service center should perform this service.
72 Glossary
AUDIO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive audio from another source (IN) or send audio to another system (OUT). These jacks are red (right) and white (left).
Automatic Channel Setup: process in which the VCR memorizes all available TV channels. Then, when you press SKIP i /CHo or SKIP j /CHp in VCR mode, you only scan through channels you receive.
Bands: settings that allow you to tune channels.
• Antenna – VHF (very high frequency; channels 213) and UHF (ultra high frequency; channels 14-69).
• Cable – standard channels 1-125 can be received without a Cable Box.
Cable Box/DBS Output Channel: 03 or 04.
COAXIAL DIGITAL AUDIO OUT jack: Sends digital audio to a Stereo, allowing you to adjust the volume at the Stereo. This connection provides the 5.
1 channel surround sound as heard in movie theaters. This jack is black.
COMPONENT VIDEO OUT (Y, C
R
, C
B
) Jacks: jacks on the back of the
DVD/VCR that send high-quality DVD video to a TV with Component Video In jacks.
This connection provides the best picture quality for the DVD Player of the
DVD/VCR.
Dolby Digital: A surround sound system that provides 5.
1 channel sound as used in movie theaters.
DTS: Digital Theater Systems. This is a surround sound system, but it is different from Dolby Digital. The formats were developed by different companies.
Dubbing: copying a video cassette using another VCR.
HQ: high quality; a feature in the VCR circuitry which provides enhanced picture detail.
Line Input: The channel to which you set your DVD/VCR during video cassette copying. If you connected the other video equipment to the AUDIO and VIDEO In jacks on the front of the DVD/VCR, select L2. If you used the AUDIO and VIDEO IN jacks on the back of the DVD/VCR, select L 1. If you accidentally enter Line Input mode, press SKIP i /CHo or SKIP j /CHp or the Number buttons to select another channel.
OTR: One-Touch Recording; a timed recording on the VCR that starts immediately and records for 30 minutes to eight hours.
RF coaxial cable: A black cable supplied with your DVD/VCR. Use it to connect your DVD/VCR to your TV, Cable Box, or Satellite Receiver.
S-Video: Produces a clearer DVD picture by sending separate signals for the luminance and the color. S-Video only provides a picture for the DVD Player of the
DVD/VCR.
Tape Speeds: how fast the video cassette travels during a recording or playback.
The faster the tape speed, the better the picture quality. Slower tape speeds affect picture quality, but you can record more onto a videotape.
• SP (standard play) – fastest tape speed (recording time for a T 120 tape is approximately two hours); best picture quality.
• LP (long play) – average tape speed. You cannot record in LP with this VCR. If tapes were recorded on a different VCR in LP speed, the tape will play in LP on the DVD/VCR.
• SLP (super long play) – slowest tape speed (recording time for a T 120 tape is approximately six hours). This speed allows the maximum recording on a single videotape.
VIDEO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive video from another source (IN) or send video to other video equipment or a TV
(OUT). These jacks are yellow.
VCR Video Heads
Four heads - Hi-Fi
Antenna
VHF/UHF – 75 ohm external antenna terminal
VHF Output Signal
Channel 03 or 04
75 ohms unbalanced
DVD Color System
NTSC
Frequency Response
DVD (linear sound):
20 Hz to 22 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
Audio CD: 20 Hz to 20 kHz
Signal-to-Noise Ratio
Audio CD: 120 dB JEITIA
(Japan Electronics and Information Technology Industries Association)
Dynamic Range
DVD (linear sound): 102 dB
Audio CD: 99 dB (JEITIA)
Total Distortion Factor
Audio CD: 0.003% (JEITIA)
DVD: 0.0025%
Wow and Flutter
Below the measurement limitation
(±0.00
1% W PEAK) (JEITIA)
Power Requirement
120V AC +/- 10%, 60 Hz +/- 0.5%
Power Consumption
Power on: 24 W
Power off: 7.0 W
Operating Temperature
4 1°F (5°C) to 104°F (40°C)
Relative Humidity
30% to 80%
Dimensions
17-1/8” (W) x 3-7/8” (H) x 10-1/2” (D)
(435mm x 99mm x 266mm)
Weight
8.8 lbs. (4.0 kg.)
NOTE: Designs and specifications are subject to change without notice.
Specifications 73
74 Helpful Hints
If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself.
If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative. If you believe the representative will need to help you with operations, please stay near the product. Our representatives will be happy to assist you.
The DVD/VCR has no power.
• Make sure the power cord is connected completely to an AC (alternating current) outlet.
• Press the STANDBY-ON button to turn on the DVD/VCR. The DVD/VCR turns on in the mode it was in when you turned it off. If there has been a power failure, it will turn on in VCR mode. Press DVD to put the unit in DVD mode. Press VCR to put the unit in VCR mode. Or, press OUTPUT on the front of the DVD/VCR to switch between the two modes.
The remote control will not operate the DVD/VCR.
• Aim the remote control directly at the remote sensor (IR) on the front of the DVD/VCR, not toward the TV. Details are on page 22.
• Remove all obstacles between the remote control and the DVD/VCR.
• Inspect and/or replace the batteries in the remote control. Details are on page 16.
• Use the remote control within 23 feet of the DVD/VCR.
• When using the DVD Player, press the DVD button, then try the other DVD feature buttons. Press
DVD so the red DVD light appears on the front of the DVD/VCR. This means the DVD/VCR is in DVD mode.
• To use the VCR, press VCR, then try the other VCR feature buttons. Press VCR so the green VCR light appears on the front of the DVD/VCR. This means the DVD/VCR is in VCR mode.
There is no picture in DVD mode.
• Make sure the video cable is connected correctly. You may connect either the yellow video cable (supplied), an optional S-Video cable, or optional component video cables. Make sure the TV is set to the correct Video In channel (usually the AUX IN, A/V IN, Auxiliary In, EXT or External In, Component
Video In, or S-Video In channel). Check your TV owner’s manual for details. Details are on pages 11-15.
• If you only used the supplied black RF coaxial cable, details are on pages 8- 10. Make sure the TV is set to channel 3 or 4 (the output channel of the DVD/VCR). Or, if you have a Cable Box/Satellite Receiver, make sure the TV is set to the Cable Box/Satellite Receiver output channel (usually 03 or 04).
• Insert a DVD that is playable on this DVD/VCR. Details are on page six.
• Make sure the DVD/VCR is in DVD mode. Press DVD or OUTPUT so the red DVD light appears on the front of the DVD/VCR.
Disc cannot play.
• Insert a playable Disc. Details are on page six.
• Place the Disc correctly in the Disc tray. If the Disc is one-sided, place the Disc in the tray with the label facing up. If the Disc is two-sided, make sure the label of the side you want to play is facing up.
• Clean the Disc. Make sure the Disc is not scratched or warped.
• Cancel the Parental Controls, enter the password, or change the control level. Details are on pages 56-57.
• Make sure the Disc is labelled for use in Region 1 or ALL regions and is NTSC compatible. Details are on page six.
Helpful Hints (cont’d) 75
There is no sound.
• Connect the audio cables firmly. Make sure the cables are connected to the AUDIO IN jacks on the TV or Stereo. Details are on pages 11-14.
• Check the audio settings of the DVD Player. Details are on page 68.
• Check the audio settings of the DVD. For example, you may have selected “soundtrack” playback or an unavailable sound setting (such as Dolby Digital). Details are on pages 58 and 68. Try other sound options provided in the DVD Disc menu.
• If you used audio cables (instead of only using the supplied black RF coaxial cable) make sure the TV or
Stereo is set to the correct Audio In channel (usually the AUX IN, Auxiliary In, A/V IN, Audio In, or
External In channel). See your TV or Stereo owner’s manual for details.
The picture is distorted.
• Connect the DVD/VCR directly to the TV. Details are on pages 8- 15. Do not connect the DVD/VCR to a
VCR, then connect the VCR to the TV. Copyright protection systems in the VCR could distort the picture playing on the DVD/VCR.
• There are some cases where a Disc or videotape picture may be distorted slightly because of the quality in which it was recorded. This is not a malfunction of the DVD/VCR.
• Make sure the Disc is compatible with the DVD Player of the DVD/VCR. Details are on page six.
You cannot change the camera angle of a DVD.
• The DVD might not contain segments recorded from different camera angles. See if multiple angles are available by referring to the Disc case or DVD Disc menu. Details are on page 55.
You cannot change the audio or subtitle language of a DVD.
• The DVD does not contain audio or subtitles in the desired language. Not all DVDs contain audio or subtitles in multiple languages. See if other languages are available by referring to the Disc case or DVD
Disc menu. Details are on pages 55 and 58.
An X appears in the top right corner of the TV screen when you try a DVD feature.
• The operation is not available at the current time or the feature is not available on the Disc. Some features are only available during playback. Others can be accessed only if play is stopped. Try stopping or playing the Disc, then try the feature again.
The DVD/VCR switches from DVD mode to VCR mode after 35 minutes of no activity.
• When AUTO POWER OFF is set to ON, the DVD/VCR switches itself from DVD mode to VCR mode if Disc playback stops for more than 35 minutes and you press no buttons on the remote or the
DVD/VCR. Details are on pages 64-65.
A screen saver appears on the TV screen during DVD mode.
• The DVD logo will appear on the TV screen when you stop Disc playback. You cannot remove it.
You want to use the DVD Player during a VCR timer recording or while the TIMER REC light appears.
• Press STANDBY-ON to turn on the DVD/VCR. Press DVD to choose DVD mode, then continue with other DVD features as described in this manual.
76 Helpful Hints (cont’d)
Power Failure
• VCR timer recordings, clock setting, language selection, and channel setup may be lost if the power fails.
See pages 26-30 to set up the channels, clock, and language again. See pages 36-38 to reprogram your timer recordings.
The VCR will not record a TV program.
• Put the DVD/VCR in VCR mode. Press VCR or OUTPUT so the green VCR light appears on the front of the DVD/VCR.
• Check the connections between the DVD/VCR, TV, antenna/Cable TV signal, and Cable Box/Satellite
Receiver (if applicable). Details are on pages 8- 15. For VCR features, you must connect the DVD/VCR to a TV with the RF coaxial cable or the yellow video cable as described on pages 811.
• Make sure the video cassette has a record tab. Details are on page 32.
The VCR will not perform a timer recording.
• Make sure the recording start and stop times are set correctly. Details are on pages 36-38.
• Make sure a tape is in the VCR and the tape has a record tab. Details are on page 32. If, after programming a timer recording, you press TIMER SET without putting a tape in the DVD/VCR, the TIMER REC light will blink.
• If the record tab on a tape is missing, the DVD/VCR will eject the tape. The TIMER REC light will blink.
• Press TIMER SET to put the DVD/VCR in standby mode for the timer recording. The TIMER REC light should appear on the front of the DVD/VCR.
• Make sure the VCR clock is set. Details are on pages 28-29.
• The VCR may not perform or continue a timer recording if the power fails.
• If you have a Cable Box/Satellite Receiver, set timer recordings differently. Details are on page nine.
• Finish programming a timer recording at least five minutes before it is set to begin.
• 12 p.m. is noon; 12 a.m. is midnight.
There is no picture or the picture is noisy or has streaks during video cassette playback.
• Put the DVD/VCR in VCR mode. Press VCR or OUTPUT so the green VCR light appears on the front of the DVD/VCR.
• If you used the supplied RF coaxial cable to connect the DVD/VCR to the TV, make sure the TV is on the same channel as the DVD/VCR’s output channel (03 or 04). The DVD/VCR’s output channel is channel 3 when you receive it. To change it to channel 4, see page eight. Make sure channel 03 or 04 is properly adjusted at the TV.
Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correct Video In channel at the TV. Details are on pages 8- 13.
• Adjust the tracking. Details are on page 44.
• TVs placed too close to the DVD/VCR can cause interference during tape playback. Move the DVD/VCR away from the TV.
The Number buttons won’t work for TV channels above 69.
• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter channel numbers as a three-digit number. If you do not have Cable TV, only channels 2-69 are available.
TV programs cannot be watched normally.
• Check the connections between the DVD/VCR, TV, antenna/Cable TV signal, and Cable Box/Satellite
Receiver (if applicable). Details are on pages 8- 15.
Poor reception
• You may need to tune your TV again. Or, reset channels at the VCR using CHANNEL SET UP.
Details are on pages 26-27.
Helpful Hints (cont’d) 77
You cannot insert a video cassette.
• Insert the tape, window side up, with the record tab facing you.
• Make sure a tape isn’t already in the VCR by pressing STOP/EJECT C A on the front of the DVD/VCR.
• Gently push on the center of the tape when putting it in the VCR. Never force the tape into the VCR.
• If a timer recording is set, you cannot insert a tape without a record tab.
You cannot remove the tape.
• Make sure the power plug is completely connected to a power outlet.
• If you have set a timer recording, press TIMER SET to delay the recording. The TIMER REC light will turn off. Then, press STOP/EJECT C A on the front of the DVD/VCR to eject the tape. Insert another tape and press TIMER SET to reset the timer recording.
• Unplug the DVD/VCR power cord for five minutes. Then, plug in the power cord again and press STANDBY-
ON on the DVD/VCR. Press STOP/EJECT C A on the DVD/VCR three to five times. If the tape still does not eject, you may need to have an authorized servicer remove the tape.
DVD/VCR ejects the tape when you press REC, RECORD, or TIMER SET.
• Make sure the tape has a record tab. Details are on page 32.
Satellite Receiver Hookups
• Watching one TV channel while recording another may not be possible if you have a Satellite Receiver.
Set your TV to channel 03 or 04, then make your channel selections at the Satellite Receiver.
• With many Satellite Receiver hookups, if you use audio and video cables to connect your DVD/VCR to your TV, you will have to put your DVD/VCR in Line Input mode (L 1 or L2).
Line Input mode
• If you accidentally enter Line Input mode (L 1 or L2 will appear on your TV screen briefly), press SKIP i /CHo or SKIP j /CHp or the Number buttons to select another channel.
Hi-Fi Stereo Sound
• During playback, Hi-Fi audio may normally revert to normal audio when you adjust tracking.
• When connecting the DVD/VCR to a TV with the red and white audio cables, you will only get stereo sound if you connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on your TV, and if the TV is on its Audio/Video In channel. See your TV owner’s manual for details.
• When you connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on your TV, the stereo light on the TV might not glow. If the status display indicates you are receiving stereo, you are. Details are on page 45.
• Only tapes recorded in Hi-Fi audio will play in Hi-Fi audio. Tapes recorded in normal audio will play in monaural (single-channel) audio.
Cleaning the Video Heads
• Your DVD/VCR automatically cleans the video heads of the VCR each time you insert a tape. However, the heads may become dirty. If so, have an authorized servicer clean the video heads. Eventually, the heads may need to be replaced.
The playback picture is too dim, too bright, or fluctuates in brightness.
• Some programs may be broadcast with copyright protection technology in order to protect the rights of copyright owners. This technology is used on programs that are recorded on video cassettes or DVDs, as well as some programs broadcast by antenna/cable/satellite television channels. Programs broadcast with copyright protection may not record clearly. Likewise, if you play a tape that is a recording of a copyright protected program, the picture may not be clear. Tapes of copyright protected programs may have a picture that is dark or dim, or the brightness of the picture may fluctuate. Therefore, avoid recording or playing copies of copyright protected programs.
• This DVD/VCR incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
78 Limited Warranty
Digital Video Disc Player / Video Cassette Recorder Combination
90 days Free Product Exchange / 9 1 days–One Year Reduced-Cost Exchange
WHO IS COVERED?
You must have proof of the date of purchase to exchange your product. A sales receipt or other document showing the date that you purchased the product is considered such proof.
MAKE SURE YOU KEEP...
Please keep your sales receipt or other document showing proof of date of purchase. Attach it to the owner’s manual and keep both nearby. Also keep the original box and packing material in case you need to return your product.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product.
For 90 days thereafter, you may exchange the defective product for a new or renewed product through Magnavox.
From 9 1 days to one year from the date of purchase, you will pay a preset exchange fee to obtain a new or renewed product. Follow the exchange procedures on the next page.
This exchange opportunity ends one year after the date of purchase. The replacement product is covered only for the warranty period of the original product. When the warranty on the original product expires, the warranty on all replaced products also expires.
When it is necessary for you to ship the product to Magnavox for exchange, you will pay the shipping costs for shipment to
Magnavox. Magnavox will pay the shipping costs when returning a product to you.
WHAT IS EXCLUDED?
Your warranty does not cover:
• shipping charges to return defective product.
• labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product.
• product repair and/or part replacement because of improper installation, abuse, neglect, misuse, accident, unauthorized repair or other cause not within the control of Magnavox.
• reception problems caused by signal conditions or cable or antenna systems outside the product.
• a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.
• incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.)
• damage caused by the use of non-VHS tapes or tapes that have not been tested and labeled for use in two, four, six, and eight hour VHS recorders.
• a product that is used for commercial or institutional purposes (including but not limited to rental purposes).
BEFORE EXCHANGING THE PRODUCT...
Please check your owner’s manual before exchanging the product. Adjustments of the controls discussed there may save you time and money.
LIMITATION OF LIABILITY AND REMEDY...
MAGNAVOX IS NOT LIABLE UNDER ANY CIRCUM-
STANCES FOR ANY DIRECT, INDIRECT, SPECIAL, INCI-
DENTAL, OR CONSEQUENTIAL DAMAGES, HOWSO-
EVER INCURRED, EVEN IF NOTIFIED OF THE POSSIBILI-
TY OF SUCH DAMAGES.
TO THE EXTENT PERMITTED BY LOCAL LAW, THE
REMEDIES PROVIDED IN THIS WARRANTY STATE-
MENT ARE YOUR SOLE AND EXCLUSIVE REMEDY.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE/PROVINCE TO
STATE/PROVINCE.
TO EXCHANGE YOUR PRODUCT IN THE U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
FOLLOW THE INSTRUCTIONS STATED PREVIOUSLY
IN THE “WHAT IS COVERED” SECTION, OR REFER TO
THE EXCHANGE INSTRUCTIONS ON THE NEXT
PAGE.
IN THE U.S.A., PUERTO RICO, AND U.S. VIRGIN
ISLANDS, ALL IMPLIED WARRANTIES, INCLUDING THE
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE SPECIFICALLY DISCLAIMED, AND TO
THE EXTENT INCONSISTENT WITH LAW OF THE
LOCALITY OF THE USER, LIMITED IN DURATION TO
THE DURATION OF THIS EXPRESS WARRANTY.
BECAUSE SOME STATES DO NOT ALLOW LIMITA-
TIONS ON HOW LONG AN IMPLIED WARRANTY
MAY LAST, THIS LIMITATION MAY NOT APPLY TO
YOU.
TO EXCHANGE A PRODUCT IN CANADA...
Please contact Magnavox at:
1-800-705-2000
In Canada, this warranty is given in lieu of all other warranties. There are no other warranties, express or implied, including any implied warranties of merchantability or fitness for a particular purpose.
WHERE IS EXCHANGE AVAILABLE?
Warranty exchange is available in all countries where the product is officially distributed by Magnavox. In countries where Magnavox does not distribute the product, the local
Magnavox service organization will attempt to exchange the product, although there may be a delay if the appropriate product is not readily available.
REMEMBER...
Please record below the model and serial numbers found on the product. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary.
MODEL #_________________________________
SERIAL #__________________________________
Magnavox, P.O. Box 520890, Miami, FL 33 152 (402) 536-4171
EL6473E004 / 1-03
Limited Warranty (cont’d) 79
EXCHANGE INSTRUCTIONS
To exchange your product with Magnavox (per the warranty conditions stated previously), remember:
• If you exchange the product within 90 days of the original purchase, there is no cost to you.
• If you exchange the product more than 90 days after but less than one year after the day of original purchase, contact Magnavox at 1-800-705-2000 to determine the preset cost for exchange.
• If you do not have your original sales receipt, or if you have any questions, call Magnavox at 1-800-705-2000.
To obtain a replacement product from Magnavox:
1. Contact Magnavox at 1-800-705-2000 to determine the cost for exchange.
2. Complete the Exchange Form below.
3. Pack the product and its accessories in the original box or a suitable alternative. You will receive replacement accessories with your replacement product. For packing details, call Magnavox at 1-800-705-2000.
4. Put the completed Exchange Form, a copy of the original sales receipt, and the proper payment amount into an envelope. DO NOT SEND CASH. Do not staple or clip these items together. Label the envelope “Return
Documents Enclosed.” Place this envelope in the box with the product.
5. Seal the box with packing tape and return the product via United Parcel Service (UPS), insured and freight prepaid, to the address provided by Magnavox. For details, call 1-800-705-2000. A replacement will be sent to you via UPS within 48 business hours of Magnavox’ receipt of the product.
When it is necessary for you to ship the product to Magnavox for exchange, you will pay the shipping costs for shipment to Magnavox. Magnavox will pay the shipping costs when returning a product to you.
EXCHANGE FORM
Your Address (street address to which replacement should be delivered, no P.O. boxes allowed):
Name:
Street Address:
City:
Phone (day):
State/Province:
Phone (night):
Apt. #:
Zip Code/Postal Code:
Exchange Fee: + Sales Tax: = Total:
Method of Payment: (Check one. Please, no cash or CODs.)
_____ Check/Money order Check/Money order No.
_____
_____
_____
_____
American Express
Visa
Novus/Discover
Mastercard
Account number
___________________________
___________________________
___________________________
___________________________
Expiration date
__________
__________
__________
__________
Signature: _____________________________________________________________
Detailed reason for return, use additional paper if necessary: _____________________________________________
_______________________________________________________________________________________________
Model Number Serial Number
Remember, the return box should include the following:
• The product,
• Completed Exchange Form and sales receipt,
• Accessories supplied with the product, and
• Payment, if applicable.
80 Information Index
ac power cord . . . . . . . . . . . . . . . . .23
angle button . . . . . . . . . . . . . . . .24, 55 angle icon . . . . . . . . . . . . . . . . . . . . .65
ant-in (antenna in) jack . . . . . .815, 23 ant-out (antenna out) jack . . .810, 23 arrow buttons . . . . . . . . . . . . . . . . .24
audio button . . . . . . . . . . . . . . .25, 58 audio in/out jacks . . . .
11-14, 22-23, 35 audio settings . . . . . . . . . . . . . . . . . .68
auto power off . . . . . . . . . . . . . . . . .65
auto repeat . . . . . . . . . . . . . . . . . . .40
automatic tape playback . . . . . . . . . . . . . . . .44
tape rewind, eject . . . . . . . . . . . .44
a-b repeat . . . . . . . . . . . . . . . . . . . .53
a-b repeat button . . . . . . . . . . . .24, 53 batteries . . . . . . . . . . . . . . . . . . . . . .
16 bit-rate display . . . . . . . . . . . . . . . . .69
black level . . . . . . . . . . . . . . . . . . . .70
c-reset/clear button . . . . . . . . . .25, 41 camera angle . . . . . . . . . . . . . . . . . .55
cassette compartment . . . . . . . . . . .
21 channel adding . . . . . . . . . . . . . . . . . . . . . .27
deleting . . . . . . . . . . . . . . . . . . . .27
selection . . . . . . . . . . . . . . . . . . . .24
setup . . . . . . . . . . . . . . . . . . .
17, 26 chapters . . . . . . . . . . . . . . . . . . . . . .50
clock . . . . . . . . . . . . . . . . . . .21, 28-29 coaxial (digital audio out) jack . .
15, 23 component video out jacks . . . .
12, 23 connections . . . . . . . . . . . . . . . . .7-15 contents, table of . . . . . . . . . . . . . . . .4
controls dvd/vcr . . . . . . . . . . . . . . . . . .
22-23 remote . . . . . . . . . . . . . . . . . .24-25 copyright protection . . . . . . . . .35, 77 counter . . . . . . . . . . . . . . . . . . .31, 41 disc menus . . . . . . . . . . . . . . . . .48, 66 disc tray . . . . . . . . . . . . . . . . . . . . . .20
disc/menu button . . . . . . . . . . . .24, 48 display button . . . . . . . . . . . .25, 31, 69 display messages . . . . . . . . . . . . . . .20
display panel . . . . . . . . . . . . . . . .
20-21 displays . . . . . . . . . . . . . . . . . . . .63, 69 dolby digital . . . . . . . . . . . . . . . . . . .68
down sampling . . . . . . . . . . . . . . . . .68
drc (dynamic range control) . . . . . .68
duplication (dvd to videotape) . . . . .39
duplication (tape) . . . . . . . . . . . . . . .35
dvd button . . . . . . . . . . . . . . . . . . . .25
dvd light . . . . . . . . . . . . . . . . . . . . . .20
ejecting a tape . . . . . . . . . . .22, 44, 77 fast forward . . . . . . . . . . . . . . . .4
3, 49 ff (fast forward) button . . . . . . . . . .24
front panel . . . . . . . . . . . . . . . . . . . .22
glossary . . . . . . . . . . . . . . . . . . . . . .72
head cleaner . . . . . . . . . . . . . . . . . . .77
helpful hints . . . . . . . . . . . . . . . .74-77 hi-fi stereo sound . . . . . . . . . . . . . . .47
hookups cable box/dbs . . . . . . . . . . . . . .910 component video . . . . . . . . . . . . .
12
S-video . . . . . . . . . . . . . . . . . . . . .
13 stereo . . . . . . . . . . . . . . . . . . .
14-15 tv . . . . . . . . . . . . . . . . . . . . . . .8-15 index search . . . . . . . . . . . . . . . . . . .42
ir (infrared remote sensor) . . . . . . .22
jpeg . . . . . . . . . . . . . . . . . . . . . . . . .62
language (dvd) . . . . . . . . . . . . . . .66-67 language (vcr) . . . . . . . . . . . . . . . . . .30
line input mode . . . . . . . . . . . . .35, 77 long play . . . . . . . . . . . . . . . . . . . . . .72
lp . . . . . . . . . . . . . . . . . . . . . . . . . . .72
markers . . . . . . . . . . . . . . . . . . . . . .54
menus . . . . . . . . . . . . . . . . . . . . .5, 48 mode button . . . . . . . . . . . . .25, 60-61 mp3 display . . . . . . . . . . . . . . . . . . .63
mp3 playback . . . . . . . . . . . . . . . . . .62
number buttons . . . . . . . . . . . . . . . .24
ok button . . . . . . . . . . . . . . . . . . . . .24
on-screen status displays (vcr) . . . . .31
one-touch recording . . . . . . . . . . . .34
open/close button . . . . . . . . . . .
19, 22 output button . . . . . . . . . . . . . . . . .22
parental controls . . . . . . . . . . . .56-57 password . . . . . . . . . . . . . . . . . . . . .56
pause button . . . . . . . . .25, 43, 52, 59 play button . . . . . . . . . . .
18-19, 22, 24 player menu . . . . . . . . . . . . . . . . . . .66
playing discs . . . . . . . . . . . . . . . . . . .
19 playing tapes . . . . . . . . . . . . . . . . . . .
18 power cord . . . . . . . . . . . . . . . . . . .23
program . . . . . . . . . . . . . . . . . . . . . .60
quick setup . . . . . . . . . . . . . .65, 66, 68 random . . . . . . . . . . . . . . . . . . . . . .61
rear panel . . . . . . . . . . . . . . . . . . . . .23
rec (record) button . . . . . . . . . .24, 32 rec (record) light . . . . . . . . . . . . . . .
21 record button . . . . . . . . . . .22, 32, 34 recording basic . . . . . . . . . . . . . . . . . . . . . . .32
one channel/watching another . . .33
prevention . . . . . . . . . . . . . . . . . .32
timer . . . . . . . . . . . . . . . . . . . .36-38 remote control batteries . . . . . . . . . . . . . . . . . . . .16
buttons . . . . . . . . . . . . . . . . . .24-25 sensor . . . . . . . . . . . . . . . . . . . . .22
repeat button . . . . . . . . . . . . . . .25, 53 repeat (tape) . . . . . . . . . . . . . . . . . .40
repeat (discs) . . . . . . . . . . . . . . . . . .53
rerecording . . . . . . . . . . . . . . . . . . .35
resume . . . . . . . . . . . . . . . . . . . . . . .52
return button . . . . . . . . . . . . . . . . . .24
reverse searching . . . . . . . . . . . .4
3, 49 rew (rewind) button . . . . . .25, 43, 4 9 rf coaxial cable . . . . . . . . . . . . . . .810 safety precautions . . . . . . . . . . . . . . .3
sap (second audio program) . . . .45-46 search mode button . . . .24, 42, 50-51 searching . . . . . . . . . . . . . . . . . .43, 49 sensor (remote) . . . . . . . . . . . . . . . .22
setup button . . . . . . . . . . . . . . . . . .24
skip G /cho, skip H /chp buttons . . . . . . .25, 51 slow button . . . . . . . . . . . . . . . .25, 43 slow motion . . . . . . . . . . . . . . . .43, 59 slp . . . . . . . . . . . . . . . . . . . . . . . . . .72
sp . . . . . . . . . . . . . . . . . . . . . . . . . . .72
specifications . . . . . . . . . . . . . . . . . .73
speed button . . . . . . . . . . . . . . . . . .24
standard play . . . . . . . . . . . . . . . . . .72
standby-on button . . . . . . . . . . . . . . . . . .22, 24 light . . . . . . . . . . . . . . . . . . . . . . .
21 status display (vcr) . . . . . . . . . . . . . .31
step-by-step playback . . . . . . . . . . . .52
stereo broadcast hookups . . . . . . . . . . . . . . . . .11, 14 receiving/recording . . . . . . . . . . .46
stereo sound . . . . . . . . . . . . . . . . . .58
stereo TV hookups . . . . . . . . . . . . .
11 still picture . . . . . . . . . . . . . . . . .4
3, 52 stop button . . . . . . . . . . . . . . . . . . .25
stop/eject button . . . . . . . . . . . . . . .22
subtitle button . . . . . . . . . . . . . .25, 55 super high speed searching . . . . . . .43
super long play . . . . . . . . . . . . . . . . .72
s-video out jack . . . . . . . . . . . . .
13, 23 table of contents . . . . . . . . . . . . . . . .4
tape duplication . . . . . . . . . . . . . . . . . .35
eject . . . . . . . . . . . . . . . . .22, 44, 77 speed . . . . . . . . . . . . . . . . . . . . . .72
time search . . . . . . . . . . . . . . . . . . .42
timer rec light . . . . . . . . . . . .
21, 38, 75 timer recording cancelling . . . . . . . . . . . . . . . . . . .38
setting . . . . . . . . . . . . . . . . . . .36-38 timer set button . . . . . . . . . .24, 36-38 title button . . . . . . . . . . . . . . . . .24, 48 titles . . . . . . . . . . . . . . . . . . . . . . . . .48
tracking . . . . . . . . . . . . . . . . . . . . . .44
tracks . . . . . . . . . . . . . . . . . . . . . . . .51
tv aspect . . . . . . . . . . . . . . . . . . . . . .65
tv hookups . . . . . . . . . . . . . . . . . .8-15 vcr button . . . . . . . . . . . . . . . . . . . .25
vcr light . . . . . . . . . . . . . . . . . . . . . .21
vcr/tv button . . . . . . . . . . . . . . . . . .25
video in/out jacks . . . . .
11, 14-15, 22-23 virtual surround . . . . . . . . . . . . . . . .70
warranty . . . . . . . . . . . . . . . . . . .78-79 zoom . . . . . . . . . . . . . . . . . . . . . . . .59
zoom button . . . . . . . . . . . . . . .24, 59
This owner’s manual is made of recyclable materials. Remember to recycle!
IB84 12E003 Printed In China
0VMN03481A / H9460UD * * * *
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project