Partitions
10 21 13/ACC
BuyLine 4089
F o u r
C
O N F I G U R A T I O N S
F O R
A
L L
R
E Q U I R E M E N T S
2
A c c u r a t e
D e s i g n
F l o o r
S t y l e s
A n c h o r e d / O v e r h e a d
Solid Plastic
This most economical yet most desirable installation style is recommended for use with lighter
weight concrete and plywood
floors. An anodized aluminum
antigrip headrail secures partitions firmly.
C e i l i n g
B r a c e d
All Other Materials
14″/35cm
83″
211cm
55″
140cm
58″
147cm
14″/35cm
12″/30cm
H u n g
For Solid Plastic only
4" Cross Bracing
Open design provides unobstructed floor area for
clean look and economical maintenance. When
used together with wall-hung fixtures, the entire
floor is accessible for efficient cleaning. Structural
steel ceiling supports are necessary to assure
proper installation.
Solid Plastic
All Other Materials
Varies
Varies
55″
140cm
Varies
58″
147cm
14″/35cm
F l o o r
12″/30cm
A n c h o r e d
Flush top line gives modern, contemporary appearance – especially suitable for low-ceilinged washrooms. Simplified construction permits ease of installation anywhere. For concrete floors only: 2" minimum penetration into floor required.
F l o o r - t o - C e i l i n g
70″
177cm
58″
147cm
12″/30cm
A n c h o r e d
Solid Plastic
Recommended for busy washrooms where abusive
treatment is possible and vandal resistance is critical. This construction style is extremely stable and
durable since pilasters are anchored into both the
concrete floor and the structural ceiling support.
Configurations for every construction
requirement.
Accurate Toilet Partitions offer flexible
solutions for every installation requirement
and environment. Four design styles are
All Other Materials
Varies
55″
140cm
58″
147cm
14″/35cm
12″/30cm
available in an assortment of materials:
durable solid plastic, economical plastic
laminate, rugged phenolic, modern
stainless steel and tough powder coated
steel provide solutions for every budget.
S i x
A c c u r a t e
M a t e r i a l s
S o l i d
3
P l a s t i c
S
O L U T I O N S
F O R
E
V E R Y
B
U D G E T
The ideal choice for busy public facilities, high density polyethylene (HDPE)
polymer is highly resistant to stains, common acids and cleaning agents, as well
as moisture, steam, and corrosion. Solid Plastic never needs painting and will not
easily dent or chip. Available in Floor Anchored/Overhead Braced, Ceiling Hung,
and Floor-to-Ceiling Anchored styles in a variety of decorator colors.
P l a s t i c
L a m i n a t e
Combines design flexibility with aesthetic appeal and economy. All the proven
benefits of high pressure laminate are built-in, featuring a smooth surface,
resistant to grease and stains. Available in a complete complement of designer
colors that coordinate attractively with other washroom accessories. Available in
all four design styles.
P h e n o l i c
-
B l a c k
C o r e
Impact, moisture, and corrosion resistant, the surfaces are smooth and easy to
clean. Phenolic partitions are compression molded and ideal for extreme moisture
conditions in showers, pools, and saunas, or when maintenance includes hosing
down washrooms. Available in all four design styles in a full array of colors, with
attractive black edges.
P h e n o l i c
-
C o l o r - T h r u
Phenolic Color-Thru adds value to regular Phenolic, with constant color from the
surface--through and through. That makes it especially effective for impact,
scratch and graffiti resistance. It also has excellent screw holding power and all
the advantages of traditional Phenolic performance. Available in a choice of
attractive colors and styles, affording full flexibility in design and application.
S t a i n l e s s
S t e e l
The gleaming beauty of stainless steel provides exceptional durability and
modern styling. A honeycomb core is glued under pressure to #304 stainless
steel sheets and then assembled with roll formed crown molding. The
corners are welded and ground smooth for extra strength. Available in all
styles in #4 satin or textured finish.
P o w d e r
C o a t e d
S t e e l
The industry standard. Hybrid epoxy/polyester powder coated finish in a variety of
designer colors over galvannealed steel is fabricated with roll formed crown
molding and a honeycomb core. Accurate’s economical powder coated steel is
available in all four design styles.
4
A c c u r a t e
S o l i d
P l a s t i c
ACCURATE solid plastic partitions are designed for high-traffic public facilities, parks and schools. It is the material of choice where low maintenance
and durability are required. Solid plastic is attractive as well as environmentally safe and sanitary. It is water resistant and unaffected by steam or
high humidity. Commercial cleaning agents may be used without fear of
damaging the surface.
ACCURATE solid plastic partitions are manufactured of high-density polyethylene (HDPE) resins with homogeneous color throughout and smooth,
machined edges. Accurate Solid Plastic meets Class B flammability ratings.
The aluminum heat sink strip at bottom edges of doors and panels is a
standard construction feature. Available in floor anchored/overhead braced,
ceiling hung, and floor-to-ceiling anchored styles.
C O L O R
S E L E C T I O N
White
9201
Cream
9235
Tan
9202
Grey
9200
Charcoal
9237
Azure
9231
Moss
9233
Blue
9203
Burgundy
9211
Black
9205
Black Confetti
9217
Folkstone Grey
9400
Blue Sapphire Speckle
9500
Garnet Speckle
9501
FAST TRACK: 10 WORKING DAYS.
Compartment limits apply.
Any standard color - in all three styles.
Ivory Essence Speckle
9500
OPTIONAL PLASTIC SHOES feature a clean style that looks
great, is easy to install, and is easy to maintain.
Actual Colors will vary from those shown do to limitations in printing process.
Please make final color selection from available color samples.
OPTIONAL PLASTIC FULL LENGTH BRACKETS provide great
looks with maximum strength and durability.
C O N S T R U C T I O N
To match or complement your Accurate partitions, plastic
brackets and shoes are available in the following colors:
White, Cream, Tan, Black, Charcoal, Gray, Blue, Azure,
Moss, and Burgundy.
F E A T U R E S
14"
O p t i o n s :
MOUNTING
SYSTEM
Simplified
pilaster-to-floor
mounting.
Mounting bolts
adjust height
and level
pilasters by
turning the lock
nut adjusters.
55” HIGH
DOORS AND
PANELS
Allows 14”
clearance
from floor.
INTEGRAL
HINGES
Installer
friendly. Door
is not preset
or assembled
at the factory.
Eliminates
the need to
handle heavy,
unwieldy
components
on site.
EMERGENCY
ACCESS
Meets ADA
requirements.
Slotted keeper
coupled with
gravity hinges
allow emergency access
with a simple
lift and pull.
VANDALRESISTANT
FASTENERS
Special driver
allows easy
installation
and virtually
eliminates
unauthorized
removal.
Stainless steel
fasteners are
standard on
all solid plastic
partitions.
VAULT-TYPE HINGE
Rugged, attractive wrap-around
hinge. Extra strong for heavy-duty
installations.
Stainless Steel Trim Shoes
Full Height Aluminum Brackets
Full Height Stainless Steel Brackets
Full Height Piano Hinges
8" Aluminum Wrap-around Hinges
6" Aluminum Strike
A c c u r a t e P h e n o l i c
A c c u r a t e P l a s t i c L a m i n a t e
5
ACCURATE plastic laminate partitions combine design flexibility with affordable cost. The high pressure laminate finishes, bonded under pressure to a solid impact-resistant
particle board core, meet or exceed all NEMA standards.
Edge banding of all components prior to face lamination
ensures optimum water runoff and durability.
ACCURATE plastic laminate is available in all four installation styles and a variety of designer colors to complement
vanities and counter tops. They are the finish of choice for
commercial and institutional installations where aesthetics
are essential.
C O L O R
S E L E C T I O N
1010
Mission White
1020
Antique White
4000
Almond
4010
Sand
4410
Natural Canvas
4300
Lime Stone
1130
Neutral Glace
4583
Desert Zephyr
4040
Khaki Brown
*4516
Windswept Tan
9680
Lodestone
3713
Canyon Zephyr
9096
Taupe
3000
Silver Gray
3010
Dove Gray
3300
Folkstone Celesta
3520
Tundra Terra
7400
Lapis Envision
7010
Brittany Blue
7318
Navy Grafix
3554
Olive Legacy
3612
Twilight Zephyr
6010
Silver Moss
6035
Hunter Nebula
5000
Burgundy
4611 Natural Tigris
4777 MDF Solidz
4801
Tungsten EV
9208 Beluga Beige
9310
Cotta Stone
9261
Ochre Roletta
9487
Oxide
4215
Earthen Terra
9176
Burnished Chestnut
*9292
Windswept Bronze
5058
Burnished Ember
*3849
Windswept Pewter
3542
Storm Solidz
3020
Graphite Grafix
3330
Ebony Granite
2150
Graphite
2000
Black
*9918
Maple
*9954
Cherry
*9939
Mahogany
;;
;;
;;;
;;;
;;;
SOLID
CORE
45# high
density
particleboard
to resist
warping
and ensure
surface
smoothness.
C O N S T R U C T I O N
F E A T U R E S
*Directional Pattern - Pattern on panels over 60” wide will run perpendicular to
pattern on doors and pilasters.
Actual Colors will vary from those shown do to limitations in printing process.
Please make final color selection from available color samples.
EDGE
CONSTRUCTION
Face laminate
overlaps
edge banding
to ensure
water runoff
and deter
vandalism.
DOOR HINGES
Full weightbearing hinges
on both top and
bottom of each
door. Wraparound mounting and through
bolting for
safety.
SHOE
CONSTRUCTION
Stainless
steel, doublehemmed, trim
shoe with
#4 satin finish
conceals
mounting
fastener and
hardware.
VANDALRESISTANT
FASTENERS
Special driver
installs fasteners which
virtually
eliminates
unauthorized
removal and
ensures easy
installation.
FAST TRACK: 10 WORKING DAYS
Compartment limits apply.
Any standard color - in all four styles.
O p t i o n s :
Steel Core Pilasters
Plywood Core
Stainless Steel Hardware
Full Height Brackets
Full Height Piano Hinges
P h e n o l i c
6
-
B l a c k
C o r e
ACCURATE phenolic partitions are the material of choice where
durability and strength are required. These partitions are fabricated to stand the test of time. The dense components, combined
with stainless steel brackets and fasteners, stand up to the most
extreme conditions of moisture and humidity. Phenolic is impact,
water, and corrosion resistant, and does not support bacteria.
The phenolic partition is decoratively faced on both sides as an
integral part of a resin-impregnated kraft paper core. The surface
sheets are fused at high temperature and pressure. In addition to
strength and serviceability, a wide range of colors provides limitless design flexibility. ACCURATE phenolic partitions are available in all four design styles.
C O N S T R U C T I O N
FAST TRACK: 10 WORKING DAYS.
Compartment limits apply.
Any standard color - in all four styles.
C O L O R
F E A T U R E S
EMERGENCY ACCESS
Meets ADA requirements. Slotted keeper
coupled with gravity
hinges allow emergency access with a
simple lift and pull.
SHOE CONSTRUCTION
Stainless steel,
double-hemmed, trim
shoe with #4 satin
finish conceals
mounting fasteners
and hardware.
VAULT-TYPE HINGE
Rugged, attractive wraparound hinge. Extra
strong for heavy-duty
installations.
VANDAL- RESISTANT
FASTENERS
Special driver installs
fasteners, virtually
eliminating unauthorized removal, and
ensuring easy installation. Stainless steel
fasteners are standard
for phenolic
partitions.
S E L E C T I O N
3010
Dove Gray
4000
Almond
1130
Neutral Glace
4410
Natural Canvas
3000
Silver Gray
3300
Folkstone Celesta
6035
Hunter Nebula
3320
Graphite Grafix
5000
Burgundy
3330
Ebony Granite
Actual Colors will vary from those shown do to limitations in printing process. Please make final color selection from available color samples.
O p t i o n s :
Class "A" Fire Rated Material
Full Height Piano Hinges
Full Height Stainless Steel Brackets
P h e n o l i c
-
C o l o r - T h r u
7
ACCURATE Phenolic Color-Thru has surface color through
and through, to help diminish damage from vandalism,
and even discourage it. This is in addition to the strength,
durability and low maintenance which has made regular
phenolic the partition of choice. Color-Thru comes in five
attractive colors and is available in all four design styles.
C O L O R
S E L E C T I O N
6260C
Sea Spray
4350C
Camel
6350C
Moss
2000
Black
5350C
Red Clay
Actual Colors will vary from those shown do to limitations in printing process.
Please make final color selection from available color samples.
FAST TRACK: 10 WORKING DAYS.
Compartment limits apply.
Any standard color - in all four styles.
A c c u r a t e
P r i v a c y
P o s t - t o - C e i l i n g
POST-TO-CEILING
SCREENS
Post is 1-3/4" sq. by
10' satin
finish aluminum.
Shown with optional third set of stirrup brackets.
&
U r i n a l
Accurate privacy and urinal screens are easy to maintain.
Available in three installation configurations, and in a
selection of six materials: solid plastic, plastic laminate,
phenolic-black core, phenolic-color-thru, stainless steel,
and powder coated steel.
Accurate styles include post-to-ceiling, floor anchored,
and wall hung screens.
F l o o r
A n c h o r e d
FLOOR ANCHORED
SCREENS
Pilaster is 6" wide.
Panels are 58"
high by depth
required.
S c r e e n s
W a l l
H u n g
WALL HUNG SCREENS
Available in 3 standard
sizes:
12" x 42", 18" x 42",
24" x 42"
Shown with optional
full height aluminum
brackets.
8
A c c u r a t e
S t a i n l e s s
S t e e l
ACCURATE stainless steel toilet partitions are highly
resilient and retain their gleaming beauty for years. The
partitions are composed of strong #304 stainless steel
with a #4 satin or textured finish, formed and bonded
under pressure to a sound-deadening honeycomb core.
The face sheets are held rigid and permanently in place by
an interlocking strip welded at each corner.
ACCURATE stainless steel is corrosion resistant and
impervious to just about any substance. Scratches caused
by acts of vandalism can be removed by buffing. The elegance of ACCURATE stainless steel will enhance and complement any design scheme.
T E X T U R E D F I N I S H
ACCURATE EXPRESS 48 Hour Shipping:
Compartment limits apply #4 Satin finish - floor anchored/overhead braced only.
FAST TRACK: 10 WORKING DAYS.
Compartment limits apply. #4 Satin finish - floor anchored/overhead braced style.
O p t i o n s :
An extra measure of protection
against vandalism.
Plywood Core
Stainless Steel Hardware
A variety of patterns
are offered.
Full Height Brackets
Full Height Piano Hinges
Textured Finishes
C O N S T R U C T I O N
PILASTER
MOUNTING
Pilaster adjustments, with
floor-mounted
jack-leveling
device are
used on flooranchored/overhead braced
pilasters.
ALTERNATE
PILASTER
MOUNTING
This type of
mounting is
furnished
on all ceiling
hung and
floor anchored
pilasters.
SHOE
CONSTRUCTION
Stainless
steel, doublehemmed, trim
shoe with #4
satin finish
conceals
mounting
fasteners and
hardware.
F E A T U R E S
F O R
HONEYCOMB
CORE
Core is made
of cellular
honeycomb.
This type of
core provides
strong
construction.
A c c u r a t e
P o w d e r
C o a t e d
9
ACCURATE pioneered the use of powder coated steel toilet partitions
which have become the standard for durable quality at an affordable
price. The finish is resistant to wear, fading, and scuffing. It is easily
cleaned with a mild soap solution and wiped dry.
The hybrid epoxy/polyester powder is electrostatically applied for uniform thickness over cold-rolled commercial quality (CRCQ) galvannealed, stretcher-leveled steel. The core is made of cellular honeycomb for solid construction and sound attenuation. It is bonded to the
formed steel with a non-toxic adhesive and locked in place with a roll
formed molding and brazed corners.
C O L O R S E L E C T I O N
White
980
Light Gray
990
Gray
940
Almond
920
Adobe
917
Pebble
959
Sand
836
Steel Blue
915
Azure
815
Navy
950
Sage
911
Burgundy
919
Carnival Red
995
Moss
924
Black
930
ACCURATE EXPRESS: 48 Hour Shipping
Compartment limits apply.
In White, Light Gray, Gray, Almond and Azure for floor anchored/overhead braced style only.
FAST TRACK: 10 WORKING DAYS
Compartment limits apply.
Any standard color for floor anchored/overhead braced style.
T E X T U R E D F I N I S H E S
Black White Speckle
921
Gray White Speckle
992
Sandstone
832
Actual Colors will vary from those shown do to limitations in printing process.
Please make final color selection from available color samples.
S T A I N L E S S
S T E E L
CONCEALED
LATCH
With emergency
access and ADA
paddle handle.
A N D
P O W D E R
BRAZED/
WELDED
CORNERS
All powder
coated steel
corners are
brazed. All
stainless steel
corners are
welded.
C O A T E D
VANDAL RESISTANT
FASTENERS
Special driver
installs fasteners
which virtually
eliminates unauthorized removal
and ensures easy
installation.
UPPER DOOR
BRACKET
Bracket is an
internal part of
the door. A pin
goes through door
and bracket for
three-point bearing and operates
in a nylon bushing
in upper hinge
bracket .
10
Specifications
PART 1:
GENERAL
PART 2:
PRODUCT
PART 3:
EXECUTION
Solid Plastic Partitions
Plastic Laminate Partitions
Phenolic-Black Core Partitions
Floor Anchored/Overhead Braced Mounting Style
Floor Anchored/Overhead Braced Mounting Style
Floor Anchored/Overhead Braced Mounting Style
1.01 Work Included
A- The toilet partitions shall be high-density polyethylene (HDPE) polymer with floor anchored/overhead braced mounting style as manufactured by
Accurate Partitions Corp., Lyons Illinois.
B- Furnish all labor and materials necessary for completion of work in this section as shown in the
approved drawings and specified herein.
1.02 Related Work—Specified elsewhere shall
include accessories and anchorage/blocking for
attachment of partitions.
1.01 Work Included
A- The toilet partitions shall be plastic laminate with
floor anchored/overhead braced mounting style as
manufactured by Accurate Partitions Corp., Lyons
Illinois.
B- Furnish all labor and materials necessary for completion of work in this section as shown in the
approved drawings and specified herein.
1.02 Related Work—Specified elsewhere shall
include accessories and anchorage/blocking for attachment of partitions.
1.01 Work Included
A- The toilet partitions shall be phenolic material with
floor anchored/overhead braced mounting style as manufactured by Accurate Partitions Corp., Lyons Illinois.
B- Furnish all labor and materials necessary for completion of work in this section as shown in the approved
drawings and specified herein.
1.02 Related Work—Specified elsewhere shall include
accessories and anchorage/blocking for attachment of
partitions.
2.01 Doors, Panels, Pilaster and Urinal Screens—
Shall be 1" thick (door and panels 55" high, pilasters 82"
high) HDPE polymer that is water resistant and nonabsorbent. A heat sink shall be attached to the bottom
of all doors and panels.
2.02 Material—The HDPE material shall have
homogenous color throughout each component with
edges machined to a 1/4” radius. Self-lubricating surface shall resist markings from pens, pencils and other
writing instruments.
2.03 Color—Will be selected from Accurate’s full
range of standard designer colors.
2.04 Door Hardware—Shall include Accurate
heavy duty wraparound cam-action hinge set that
permits door to return to a pre-set position when
not locked. Hinges, strike, and keeper shall be diecast Zamac with brushed finish to resist corrosion,
and shall be through bolted with vandal resistant
barrel nuts and shoulder screws. Hinge and slide
latch assembly shall allow emergency access by
lifting the door from the bottom.
2.05 Mounting Hardware—Panel brackets shall be
54" long extruded aluminum with 6 through bolt panel
attachment points and satin finish. Panels shall be
through bolted with vandal resistant barrel nuts and
shoulder screws.
2.06 Construction Design—Partitions shall be
anchored to the floor by a 1/4" x 1" stainless steel
mounting bar attached to the bottom of the pilaster.
Each mounting bar shall be anchored to the floor with
3/8" zinc plated bolts. Floor anchoring system shall be
concealed by stainless steel shoes. Aluminum headrail
with anti-grip profile shall provide overhead bracing
and span all partitions and brace the end pilaster to
the back wall.
2.01 Doors, Panels and Urinal Screens—Shall
have a finished thickness of 1" with decorative plastic
laminate applied to 7/8" thick particleboard.
2.02 Pilasters—Shall have a finished thickness of 1
1/4" with decorative plastic laminate applied to 1 1/8"
thick particleboard.
2.03 Material—Doors, panels, pilasters and urinal
screens shall be fabricated from 45-pound density, resin
impregnated 7/8" thick particleboard. Decorative plastic
laminate shall be applied to the particleboard with a nontoxic, water resistant adhesive under high pressure. All
components shall be edge banded prior to face lamination
to ensure moisture run-off and vandal resistance.
2.04 Finish—All components shall have faces and
edges covered with a decorative, vertical grade (.050
thickness) laminate.
2.05 Color—Will be selected from Accurate’s full
range of standard designer colors.
2.06 Door Hardware—Shall be Accurate cam-action
hinge that permits door to return to a pre-set position
when not locked. Hinge, strike and keeper shall be
chromium plated Zamac to resist corrosion and through
bolted with vandal resistant barrel nuts and shoulder
screws. Cam-action hinge shall allow emergency
access by lifting the door from the bottom.
2.07 Mounting Hardware—Chrome plated Zamac
stirrup brackets shall be secured to walls and pilasters
with tamper resistant fasteners. Panels shall be
through bolted with tamper resistant barrel nuts and
shoulder screws.
2.08 Construction Design—Partitions shall be
anchored to the floor with 1/4”X1” steel mounting bar
attached to the bottom of the pilaster. Each mounting bar
shall be secured to the floor with 3/8” zinc plated bolts.
Floor anchoring system shall be concealed by a type 304
stainless steel trim shoe with a #4 finish. Aluminum
headrail with anti-grip profile shall provide overhead
bracing and span all partitions and brace the end pilaster
to the back wall.
2.01 Doors and Pilasters— Shall be 3/4" thick solid
phenolic core and decorative surface sheet on both faces.
2.02 Panels and Urinal Screens—Shall be 1/2" thick
solid phenolic core and decorative surface sheet on both
faces.
2.03 Material—Doors, panels, pilasters and urinal
screens shall be fabricated from phenolic material comprised of multiple layers of melamine resin impregnated
kraft paper, and a decorative surface sheet on both faces.
All layers shall be fused together under high temperature
and pressure.
2.04 Finish—All components shall be water-resistant.
Edges shall be machine finished with chamfered edges
and black finish.
2.05 Color—Shall be selected from Accurate’s full range
of standard designer colors.
2.06 Door Hardware—Shall include Accurate heavy
duty wraparound cam-action hinge set that permits door
to return to a pre-set position when not locked. Hinges,
strike, and keeper shall be die-cast Zamac with brushed
finish to resist corrosion, and shall be through bolted with
vandal resistant barrel nuts and shoulder screws. Hinge
and slide latch assembly shall allow emergency access
by lifting the door from the bottom.
2.07 Mounting Hardware—Stainless steel stirrup
brackets with brushed finish shall be secured to walls
and pilasters with stainless steel vandal resistant fasteners. Panels shall be through bolted with tamper resistant
barrel nuts and shoulder screws.
2.08 Construction Design—Partitions shall be
anchored to the floor with 1/4" x 1" stainless steel mounting bar attached to the bottom of the pilaster. Each
mounting bar shall be secured to the floor with 3/8" zinc
plated bolts. Floor anchoring system shall be concealed
by a type 304 stainless steel trim shoe with a #4 finish.
Aluminum headrail with anti-grip profile shall provide
overhead bracing and span all partitions and brace the
end pilaster to the back wall.
3.01 Installation—Shall be installed in accordance to the Accurate installation instructions with
partitions rigid, straight and plumb. Doors and panels shall be mounted 14" above the finished floor.
3.02 Warranty—Accurate Partitions Corp. guarantees its solid plastic HDPE partitions against breakage, corrosion, and delamination for 15 YEARS from
the date of receipt by the customer. If material is
found defective during that period, the material
shall be replaced free of charge. No credits or
allowances shall be issued for any labor or expenses relating to the replacement of components covered under the warranty plan.
3.01 Installation—Shall be installed in accordance to
the Accurate installation instructions with partitions
rigid, straight and plumb. Doors and panels shall be
mounted 12" above the finished floor.
3.02 Warranty—Accurate Partitions Corp. guarantees its plastic laminate partitions, properly maintained, against discoloration or delamination for 2
YEARS from the date of receipt by the customer. If
material is found defective during that period, the
material shall be replaced free of charge. No credits or allowances shall be issued for any labor or
expenses relating to the replacement of components covered under the warranty plan.
3.01 Installation—Shall be installed in accordance
to the Accurate installation instructions with partitions rigid, straight and plumb. Doors and panels
shall be mounted 12" above the finished floor.
3.02 Warranty—Accurate Partitions Corp. guarantees
its phenolic partitions, properly maintained, against
delamination, breakage or corrosion for 10 YEARS from
the date of receipt by the customer. If material is found
defective during that period, the material shall be
replaced free of charge. No credits or allowances shall
be issued for any labor or expenses relating to the
replacement of components covered under the warranty plan.
Specifications
PART 1:
GENERAL
PART 2:
PRODUCT
PART 3:
EXECUTION
Phenolic-Color-Thru Partitions
Stainless Steel Partitions
Powder Coated Steel Partitions
Floor Anchored/Overhead Braced Mounting Style
Floor Anchored Overhead/Braced Mounting Style
Floor Anchored/Overhead Braced Mounting Style
1.01 Work Included
A - The toilet partitions shall be "COLOR- THRU"
phenolic material with floor anchored/overhead
braced mounting style as manufactured by Accurate
Partitions Corp., Lyons, Illinois.
B - Furnish all labor and materials necessary for
completion of work in this section, as shown in the
approved drawings and specified herein.
1.02 Related Work—Specified elsewhere, shall
include accessories and anchorage/blocking for
attachment of partitions.
1.01 Work Included
A- The toilet partitions shall be stainless steel with
floor anchored/overhead braced mounting style as
manufactured by Accurate Partitions Corp., Lyons
Illinois.
B- Furnish all labor and materials necessary for
completion of work in this section as shown in the
approved drawings and specified herein.
1.02 Related Work—Specified elsewhere shall
include accessories and anchorage/blocking for
attachment of partitions.
1.01 Work Included
A- The toilet partitions shall be powder coated steel
with floor anchored/overhead braced mounting
style as manufactured by Accurate Partitions Corp.,
Lyons, Illinois.
B- Furnish all labor and materials necessary for
completion of work in this section as shown in the
approved drawings and specified herein.
1.02 Related Work—Specified elsewhere shall
include accessories and anchorage/blocking for
attachment of partitions.
2.01 Doors and Pilasters—Shall be solid phenolic core
with decorative surface sheet on both faces and an overall thickness of 3/4%". Phenolic core color shall be the
same as the decorative surface sheets.
2.02 Panels and Urinal Screens—Shall be solid phenolic core with decorative surface sheet on both faces
and an overall thickness of W'. Phenolic core color shall
be the same as the decorative surface sheets.
2.03 Material—Doors, panels, pilasters and urinal
screens shall be fabricated from phenolic material comprised of multiple layers of resin-impregnated kraft paper
with a decorative surface sheet on both faces. Kraft paper,
phenolic resin and decorative face sheets shall all be the
same color and shall be fused together under high temperature and pressure.
2.04 Finish—All components shall be water-resistant.
All edges shall be the same color as the face sheets and
machine-finished with chamfered edges.
2.05 Color—Shall be selected from Accurate's full
range of designer COLOR- THRU phenolic colors.
2.06 Door Hardware—Shall be gravity cam-action hinge
that permits door to return to a pre-set position when not
locked. Hinge, strike and keeper shall be cast stainless steel
or Zamac with brushed finish to resist corrosion, and shall
be through-bolted to doors and pilasters with vandal-resistant stainless steel shoulder screws and barrel nuts. Camaction hinge shall allow emergency access by lifting the
door from the bottom.
2.07 Mounting Hardware—Cast stainless steel or
Zamac stirrup brackets with brushed finish shall be
secured to walls and pilasters with vandal-resistant stainless steel fasteners. Panels shall be through-bolted with
vandal-resistant stainless steel shoulder screws and barrel nuts.
2.08 Construction Design—Partitions shall be
anchored to floor by 1,4" x 1" stainless steel mounting
bar attached to the bottom of each pilaster. Each
mounting bar shall be secured to floor with 3/8" zinc
plated bolts. Floor anchoring system shall be concealed by a type 304 stainless steel trim shoe with a
#4 finish. Aluminum headrail with anti-grip profile
shall provide overhead bracing and span all partitions
and brace the end pilaster to the back wall.
2.01 Doors, Panels, and Urinal Screens—
Shall be 1" thick and fabricated from tension leveled 22 gauge type 304 stainless steel with a # 4
finish bonded to sound deadening honeycomb
core.
2.02 Pilasters—Shall be 1 1/4" thick, 82" high,
and fabricated from tension leveled 22 gauge
type 304 stainless steel with a # 4
finish bonded to sound deadening honeycomb
core.
2.03 Material—Doors, panels, pilasters, and
urinal screens shall be manufactured with a
resin impregnated honeycomb core that is bonded under pressure to the stainless steel with a
non-toxic adhesive to ensure solid construction
and sound attenuation. All the stainless steel
components shall be assembled with a continuous roll-formed interlocking, 22-gauge stainless
steel crown molding welded and ground smooth
at the corners.
2.04 Finish—All components shall be 304
stainless steel with a # 4 finish and include a
PVC film for protection during shipment and
installation.
2.05 Door Hardware—Shall include bottom
hinge with adjustable cam that permits door to
return to a pre-set position when not locked.
Hinge, strike and keeper shall be chromium
plated Zamac to resist corrosion and through
bolted with vandal resistant barrel nuts and
shoulder screws. Door hardware shall permit
emergency access from the outside of the partition. Doors for handicapped compartments shall
be supplied with Accurate ADA paddle handles.
2.06 Mounting Hardware—Chrome plated
Zamac stirrup brackets shall be used to mount
panels and pilasters. Mounting hardware shall be
secured with vandal resistant screws.
2.07 Construction Design—Partitions shall
be anchored to floor with one piece-mounting
fork and include integral leveling bolt to provide
proper height adjustment. Floor anchoring system shall be concealed by a type 304 stainless
steel trim shoe with a #4 finish, secured with
two metal clips integrated into the floor anchor
assembly. Aluminum headrail with anti-grip profile shall provide overhead bracing and span all
partitions and brace the end pilaster to the back
wall.
3.01 Installation—Shall be installed in accordance to the Accurate installation instructions
with partitions rigid, straight and plumb. Doors
and panels shall be mounted 12" above the finished floor.
3.02 Warranty—Accurate Partitions Corp. guarantees its stainless steel partitions, properly
maintained, against corrosion or discoloration for
5 YEARS from the date of receipt by the customer. If material is found defective during that
period, the material shall be replaced free of
charge. No credits or allowances shall be issued
for any labor or expenses relating to the replacement of components covered under the warranty
plan.
2.01 Doors, Panels, and Urinal Screens—
Shall be 1" thick and fabricated from tension-leveled, cold rolled commercial quality 22 gauge
galvannealed steel, bonded to sound deadening
honeycomb core.
2.02 Pilasters—Shall be 1 1/4" thick, 82" high,
and fabricated from tension-leveled, cold rolled
commercial quality 22 gauge galvannealed steel,
bonded to sound deadening honeycomb core.
2.03 Material—Doors, panels, pilasters and urinal screens shall be manufactured with a honeycomb core bonded to the steel with a non-toxic
adhesive to ensure solid construction and sound
attenuation. All four components shall be assembled with a continous roll-formed interlocking
crown molding, with the corners brazed and
ground smooth.
2.04 Finish—Doors, panels, pilasters, and urinal
screens shall be power washed and phosphate
treated for maximum finish color adhesion. All components shall be finished with a hybrid epoxy/polyester powder, electrostatically applied to ensure
uniform thickness and baked to cure.
2.05 Color—Shall be selected from Accurate’s
full range of standard designer colors.
2.06 Door Hardware —Shall include bottom
hinge with adjustable cam that permits door to
return to a pre-set position when not locked.
Hinge, strike and keeper shall be chromium plated Zamac to resist corrosion and through bolted
with vandal resistant barrel nuts and shoulder
screws. Door hardware shall permit emergency
access from the outside of the partition. Doors for
handicapped compartments shall be supplied
with Accurate ADA paddle handles.
2.07 Mounting Hardware—Chrome plated
Zamac stirrup brackets shall be used to mount
panels and pilasters. Mounting hardware shall
be secured with vandal resistant screws.
2.08 Construction Design—Partitions shall be
anchored to floor with one piece-mounting fork and
include integral leveling bolt to provide proper
height adjustment. Floor anchoring system shall be
concealed by a type 304 stainless steel trim shoe
with a #4 finish, secured with two metal clips integrated into the floor anchor assembly. Aluminum
headrail with anti-grip profile shall provide overhead bracing and span all partitions and brace the
end pilaster to the back wall.
3.01 Installation—Shall be installed in accordance to the Accurate installation instructions
with partitions rigid, straight and plumb. Doors
and panels shall be mounted 12" above the finished floor.
3.02 Warranty—Accurate Partitions Corp. guarantees its powder coated steel partitions, properly maintained, against chipping, flaking, cracking or discoloration for 3 YEARS from the date of
receipt by the customer. If material is found
defective during that period, the material shall be
replaced free of charge. No credits or allowances
shall be issued for any labor or expenses relating
to the replacement of components covered under
the warranty plan.
3.01 Installation—Material shall be installed in
accordance to manufacturer's installation
instructions with partitions rigid, straight and
plumb. Doors and panels shall be mounted 12"
above the finished floor.
3.02 Warranty—Accurate Partitions Corp. guarantees its COLOR-THRU phenolic partitions, when
properly maintained, against delamination, breakage, or corrosion for 10 YEARS from the date of
receipt by the customer. If material is found to be
defective during that period, the material shall be
replaced free of charge. No credits or allowances
shall be issued for any labor or expenses relating to
the replacement of components covered under the
warranty plan.
11
S h o w e r D i v i d e r s / D r e s s i n g B o o t h s
ACCURATE Shower Dividers and Dressing Booths are
strong and durable to hold up in public shower areas.
ACCURATE offers materials that resist penetration by
water, steam, mildew, odors and soap. The clean,
modern design is attractive as well.
ACCURATE Dressing Booths enhance shower installations—available with door or curtain options.
Choose from solid plastic, phenolic, stainless steel
or powder coated steel materials.
Accurate Partitions Corp.
P.O. BOX 287, LYONS, IL 60534
Tel: 708-442-6800 • Fax: 708-442-7439
www.accuratepartitions.com
E-mail: [email protected]
ACCURATE’s customer service group is ready to assist you
with any and all needs!
D I S T R I B U T E D
ADA Code Requirements
ACCURATE has been a pioneer in the design of facilities for
the physically challenged. Our engineers stand ready to assist
in layout design to meet code or special requirements.
ACCURATE reserves the right to change specifications and product without notice.
The color charts shown in this catalog are printed reproductions and are for
descriptive purposes only. Color selection cards are available upon request.
© 2008 Accurate Partitions Corp.
B Y :
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement