Serie UT
SEC- VD- DSW Multiple Display Control - 0008
Ver. 2. 7
2009- 06- 25
Multiple Display Control Protocol
for SyncMaster P42H(n) P50Hn
P50F(n) P63F(n)
320MX(n) 400CX(n)
400MX(n) 460CX(n)
320MP(n) 400MP(n)
460MP(n),460UT(n)
320MX(n)-2 320MP-2
400MX(n)-2 400FP(n)-2
460MX(n)-2 460FP(n)-2
Copyright © 2003 2008 Samsung Electronics Co., Ltd
SEC- VD- DSW External Control - 0008
SEC- VD- DSW Multiple Display Control - 0008
Copyright notice
This document is Copyright © Samsung Electronics, Co. - all rights reserved.
「This document is a technical asset of Samsung Electronics, Co. and using or copying
this material without the authorization from the technical data management group is strictly
prohibited..」
Contact Information
Display S/W Group, VD Business Division
Samsung Electronics Co., Ltd
Address : 416, Maetan-3Dong, Paldal-Gu,
Suwon City, Kyungki-Do, Korea
442-742
Telephone : 82-31-277-2764
E-mail
: [email protected]
Prepared by : Display S/W, Video Display Division.
Status : Prepared
Subject : Technical Writer, Programmer, Developer
Outline : Protocol type document of Multiple Display Control 1.0
History :
Version
Date
Content
Prepared by
1.0
2005. 01. 05.
Protocol for Multiple Display Control
S. Jang
1.1
2005. 01. 07
Add Safety Lock
S. Jang
1.2
2005. 01. 18
Add Video Wall
J. Lee
1.3
2005. 01. 26
modify Maintenance Control
S. Jang
1.4
2005. 03. 11
modify Baudrate, PIP Control
J. Lee
1.5
2005. 07. 04
Add Commands
S. Jang
1.6
2005. 11. 11
Add Command ( Screen Scroll On)
S. Jang
1.7
2006. 02. 01
Add Commands
H. Park
1.8
2006. 10. 02
Add Commands
H. Park
1.9
2006. 12. 18
Add Commands ( New Video Wall )
H. Park
Compared by
Display S/W, VD Business Team, Samsung Electronics
1
SEC- VD- DSW External Control - 0008
Version
Date
Content
Prepared by
2.0
2007. 04. 17.
Add Commands
H. Park
2.1
2008. 06. 26.
Add Commands
J. Choi
2.2
2008. 10. 17.
Modify Commands
B.I. Choi
2.4
2009. 01. 23.
2.5
2009. 01. 31.
2.6
2009. 03. 16.
2.7
2009. 06. 25
(Model Number Control Command)
Modify Commands
(Model Number Control Command)
B.I. Choi
Document
B.I. Choi
Modify Commands
B.I. Choi
Modify
(Model Number Control Command)
Modify Commands
(Model Number Control Command)
Compared by
J.H. Choi
Display S/W, VD Business Team, Samsung Electronics
2
SEC- VD- DSW External Control - 0008
1. INTERFACE
1. 1. Connecting Method
1) Connecting method
-
As of Figure 1-1, connect RS232-In(9Pin) to Personal Computer, connect the next
TV of Display to be connected from RS232-Out (9Pin).
-
In doing so, each TV or Monitor ID can be given from 0 to 99.
-
ID cannot be given duplicated.
-
When granting ID, it does not need to be given out in the connecting order.
Figure1-1 PC,TV or Monitor connecting method
UART LCD 1
IN
OUT
UART LCD 2
IN
OUT
UART LCD 3
IN
OUT
UART LCD 4
IN
OUT
RS232
Personal
Computer
Display S/W, VD Business Team, Samsung Electronics
3
SEC- VD- DSW External Control - 0008
1. 2. Connection Spec.
1) Connection Spec.
-
Interactive communications using RS232.
-
Of RS232 standards, three signals TxD(No.2), RxD(No.3) and GND(No.5) are used →
Refer to Figure 1
-
Limit the distance between devices to less than 4m.
- Currently, out of 9 PIN RS232 terminal, PINS in use are numbers 2, 3 and 5.
- ID should show hexadecimal value of assigned ID, but ID 0 should be 0xFF.
- Every communication will be made in hexadecimals and Checksum is the sum of all
remainings. If it exceeds two digits, for example, it is 11+FF+01+01=112, discard the
number in the first digit like below.
example) Power On & ID=0
Header Command
ID
0xAA
0x11
Header Command
0x11
→ 0xAA
Data Length
1
0xFF
Data 1
Check
Sum
Power
Data Length
1
Data 1
1
12
- If you want to control every mechanism connected with Serial Cable regardless of its
ID, set ID part to "0xFE" and send commands. At the time, each SET will follow
commands but it will not respond with ACK.
Table 2-1 RS232 Network spec
Bits Rate
9600 bps
Data Bits
8 bits
Parity
None
Stop Bits
1 bit
Flow Control
None
Display S/W, VD Business Team, Samsung Electronics
4
SEC- VD- DSW External Control - 0008
Figure 2-1
RS- 232 pin out DB- 9 pin used for Asynchronous Data
Display S/W, VD Business Team, Samsung Electronics
5
SEC- VD- DSW External Control - 0008
2. Commanding words
No
Command Type
Command
Value Range
1
Status Control
0x00
-
2
Time Control
0x01
-
3
On Time Control
0x02
-
4
Off Time Control
0x03
-
5
Video Control
0x04
-
6
Audio Control
0x05
-
7
RGB Control
0x06
-
8
Maintenance Control
0x08
-
9
Serial Number Control
0x0B
-
10
Display Status Control
0x0D
-
11
Software Version Control
0x0E
-
12
Model Number Control
0x10
-
13
Power Control
0x11
0 ~ 1
14
Volume Control
0x12
0 ~ 100
15
Mute Control
0x13
0 ~ 1
16
Input Source Control
0x14
-
17
Picture sizes
0x15
-
18
Direct Channel Control
0x17
-
19
Screen Mode Control
0x18
-
20
Screen Size Control
0x19
0 ~ 255
21
Red Offset Control
0x1A
0 ~ 100
22
Green Offset Control
0x1B
0 ~ 100
23
Blue Offset Control
0x1C
0 ~ 100
24
Contrast Control
0x24
0 ~ 100
25
Brightness Control
0x25
0 ~ 100
26
Sharpness Control
0x26
0 ~ 100
27
Color Control
0x27
0 ~ 100
28
Tint Control
0x28
0 ~ 100
29
Red Gain Control
0x29
0 ~ 100
30
Green Gain Control
0x2A
0 ~ 100
Control
Display S/W, VD Business Team, Samsung Electronics
6
SEC- VD- DSW External Control - 0008
31
Blue Gain Control
0x2B
0 ~ 100
32
Treble Control
0x2C
0 ~ 100
33
Bass Control
0x2D
0 ~ 100
34
Coarse Control
0x2F
0 ~ 1
35
Fine Control
0x30
0 ~ 1
36
H-Position Control
0x31
0 ~ 1
37
V-Position Control
0x32
0 ~ 1
38
Clear Menu Control
0x34
0
39
Remote Control
0x36
0 ~ 1
40
RGB Contrast Control
0x37
0 ~ 100
41
RGB Brightness Control
0x38
0 ~ 100
42
Auto Adjustment Control
0x3D
0
43
Color Tone Control
0x3E
0 ~ 4
44
Color Temperature Control
0x3F
0 ~ 10
45
Pixel Shift Control
0x4C
-
46
Video Wall Control
0x4F
-
47
Auto Lamp Control
0x57
-
48
Manual Lamp Control
0x58
0 ~ 100
49
Safety Screen Run Control
0x59
0 ~ 6
50
Safety Screen Control
0x5B
-
51
Video Wall Mode Control
0x5C
0 ~ 1
52
Safety Lock
0x5D
0 ~ 1
53
Panel Lock
0x5F
0 ~ 1
54
OSD On/OFF
0x70
0 ~ 1
55
P. Mode Control
0x71
-
56
S. Mode Control
0x72
0 ~ 4
57
NR Mode Set
0x73
0 ~ 1
58
PC Color Tone Control
0x75
0 ~ 3
59
Auto AutoAdjustment
0x76
0 ~ 1
60
All Keys Lock
0x77
0 ~ 1
61
SRS TSXT Control
0x78
0 ~ 1
62
Film Mode
0x79
0 ~ 1
63
Signal Balance
0x7A
0 ~ 1
0x7E
0 ~ 100
0x7B
0 ~ 100
64
SB Gain
SB Red Gain
Display S/W, VD Business Team, Samsung Electronics
7
SEC- VD- DSW External Control - 0008
65
SB Green Gain
0x7C
0 ~ 100
SB Blue Gain
0x7D
0 ~ 100
SB Sharpness
0x7F
0 ~ 100
66
Panel On Time
0x83
-
67
Video Wall On
0x84
0 ~ 1
68
Temperature Control
0x85
0 ~ 125
69
Brightness Sensor
0x86
0 ~ 1
70
Dynamic Contrast
0x88
0 ~ 1
71
Safety Screen On
0x88
1 ~ 5
72
Video Wall User Control
0x89
-
73
Model Name
0x8A
-
"-" indicates multiple setting items-refer to "2.1. Command Detailed Explanation" for more
details.
Display S/W, VD Business Team, Samsung Electronics
8
SEC- VD- DSW External Control - 0008
2. 1. Command Detailed Explanation
* Status Control
●
Function
Personal Computer shows current setting condition of TV / Monitor.
●
Get Status
Header Command
0xAA
0x00
●
Ack
Header Command
0xAA
0xFF
Val 3
ID
Data Length
0
Check
Sum
Data Length Ack/Nak
9
'A'
r-CMD
0x00
Val 1
Power
Val 2
Volume
Val 6
Val 7
Check
Sum
Mute
Input
Aspect N Time NF F Time NF
Power : Power code to be set on TV / Monitor
Volume : Volume value code ( 0 ~ 100 ) to be set on TV / Monitor
Mute : Mute code to be set on TV / Monitor
Input : Input Source code to be set on TV/Monitor
Aspect : Image Size code to be set on TV/Monitor
N Time NF : OnTime ON/OFF value of time to set TV/Monitor
F Time NF : OffTime ON/OFF value of time to set TV/Monitor
●
Val 4
ID
Val 5
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
0
Check Sum Error
1
etc.
r-CMD
0x00
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
9
SEC- VD- DSW External Control - 0008
* Time Control
●
Function
Personal Computer controls current time of TV / Monitor.
●
Get Time Status
Header Command
0xAA
0x01
●
Set Time
Header Command
0xAA
0x01
Data 5
0
ID
ID
Data Length
0
Check
Sum
Data Length
Data 1
5
AP Time
Data 2
H Time
Data 3
Data 4
Val 1
Val 2
M Time
0
Check
Sum
: AM/PM value to be set on TV/Monitor
1
AM
0
PM
H Time : Hour value ( 1 ~ 12 ) to be set on TV/Monitor
M Time : Minute value ( 0 ~ 59 ) to be set on TV/Monitor
AP Time
●
Ack
Header Command
0xAA
0xFF
Val 3
ID
Data Length Ack/Nak
7
'A'
r-CMD
0x01
AP Time
H Time
Val 1
Check
Sum
Val 5
Check
Sum
0
M Time
0
AP Time, H Time, M Time : Same as above
H Time, M Time if current time was not set on Monitor, 0xFF
●
Val 4
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x01
ERR
Display S/W, VD Business Team, Samsung Electronics
10
SEC- VD- DSW External Control - 0008
* On Time Control
●
Function:
Personal Computer controls the time that TV / Monitor turns on.
●
Get On Time Status
Header Command
0xAA
0x02
●
Set On Time
Header Command
0xAA
0x02
ID
ID
Data Length
0
Data Length
6
Check
Sum
Data 1 Data 2 Data 3 Data 4
N AP Time N H Time N M Time N Time VR
Data 5 Data 6
Check
Sum
N Time NF N Time SC
N AP Time : On Time AM/PM value to be set on TV/Monitor
1
AM
0
PM
N H Time : On Time Hour value ( 1 ~ 12 ) to be set on TV/Monitor
N M Time : On Time Minute value ( 0 ~ 59 ) to be set on TV/Monitor
N Time VR : On Time Volume value ( 0 ~ 100 ) to be set on TV/Monitor
N Time NF : On Time ON/OFF value to be set on TV/Monitor
1
On Time ON
0
On Time OFF
N Time SC : On Time ON/OFF Control Source value (refer to Input Source Control
●
Ack
Header Command
0xAA
0xFF
ID
Data Length Ack/Nak
8
Val 3
Val 4
Val 5
Val 6
N M Time N Time VR N Time NF N Time SC
'A'
r-CMD
Val 1
Val 2
0x02 N AP Time N H Time
Check
Sum
N AP Time, N H Time, N M Time, N Time VR, N Time NF, N Time SC
above
N H Time, N M Time if On Time was not set on Monitor, 0xFF
●
)
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x02
Val 1
ERR
: Same as
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
11
SEC- VD- DSW External Control - 0008
* Off Time Control
●
Function
Personal Computer controls the time that TV / Monitor turns off.
●
Get Off Time Status
Header Command
0xAA
0x03
●
Set Off Time
Header Command
0xAA
0x03
ID
ID
Data Length
0
Data Length
6
Check
Sum
Data 1 Data 2 Data 3 Data 4
F AP Time F H Time F M Time
0
Data 5 Data 6
Check
F Time NF
0 Sum
F AP Time : Off Time AM/PM value to be set on TV/Monitor
1
AM
0
PM
F H Time : Off Time Hour value ( 1 ~ 12 ) to be set on TV/Monitor
F M Time : Off Time Minute value ( 0 ~ 59 ) to be set on TV/Monitor
F Time NF : Off Time ON/OFF value to be set on TV/Monitor
1
Off Time ON
0
Off Time OFF
●
Ack
Header Command
0xAA
0xFF
Val 3
F M Time
Val 4
0
ID
Val 5
F Time NF
Data Length Ack/Nak
8
'A'
r-CMD
Val 1
Val 2
0x03 F AP Time F H Time
Val 6
Check
0 Sum
F AP Time, F H Time, F M Time, F Time NF : Same as above
F H Time, F M Time if Off Time was not set on, 0xFF
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x03
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
12
SEC- VD- DSW External Control - 0008
* Video Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer shows the screen condition of TV / Monitor.
●
Get Video Status
Header Command
0xAA
0x04
●
Ack
Header Command
0xAA
0xFF
Val 3
Sharpness
Val 4
Color
ID
ID
Val 5
Tint
Data Length
0
Check
Sum
Data Length Ack/Nak
0x0A
'A'
Val 6
Val 7
r-CMD
0x04
ColorTone ColorTemp
Val 8
0
Val 1
Contrast Brightness
Check
Sum
Contrast, Brightness, Sharpness, Color, Tint, ColorTone, ColorTemp
Same as above
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x04
Val 2
:
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
13
SEC- VD- DSW External Control - 0008
* Audio Control
●
Function
Personal Computer shows the sounds condition of TV / Monitor.
●
Get Audio Status
Header Command
0xAA
0x05
●
Ack
Header Command
0xAA
0xFF
Val 3
Balance
ID
Data Length
0
Check
Sum
Data Length Ack/Nak
0x05
'A'
r-CMD
0x05
Val 1
Val 2
Val 1
Check
Sum
Treble
Bass
Check
Sum
Treble, Bass, Balance
●
ID
: Same as above
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x05
ERR
Display S/W, VD Business Team, Samsung Electronics
14
SEC- VD- DSW External Control - 0008
* RGB Control (PC, BNC, DVI Only)
●
Function
Personal Computer shows screen condition of TV / Monitor.
●
Get Video Status
Header Command
0xAA
0x06
●
Ack
Header Command
0xAA
0xFF
Val 3
Val 4
ColorTone ColorTemp
ID
ID
Val 5
0
Data Length
0
Check
Sum
Data Length Ack/Nak
0x0A
'A'
Val 6
Val 7
r-CMD
0x06
Red Gain Green Gain Blue Gain
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x06
Val 2
Contrast Brightness
Val 8
Contrast, Brightness, ColorTone, ColorTemp,
ColorTemp, Red, Green, Blue
●
Val 1
Check
Sum
: Same as above
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
15
SEC- VD- DSW External Control - 0008
* Maintenance Control
●
Function
Personal Computer shows maintenance state of TV / Monitor.
Get Maintenance Status
Header Command
ID
0xAA
0x08
● Ack
Header Command
ID
0xAA
0xFF
●
Val 3
Val 4
P.Source LMax_H
Val 11
Val 5
0
Check
Sum
Data Length Ack/Nak
0x15
'A'
Val 6
Val 7
LMax_M LMax_AP LMaxValue
Val 12
Val 13
LMinValue
LampValue
ScreenInterval
Val17
Val 18
Val19
V.WallFormat V.WallDivid
●
Data Length
V.WallSet
Val 14
r-CMD
0x08
Val 1
Power
Val 8
LMin_H
ScreenTime
Val 9
LMin_M
Val 15
ScreenType
Val 2
P.Size
Val 10
LMin_AP
Val 16
V.Wall
Check
Sum
Power : Power code set on TV / Monitor
P.Size : P.Size value code set on TV / Monitor
P.Source : Source value code set on TV / Monitor
LMax_H : Auto Lamp Max Time Hour (1 ~ 12) set on TV / Monitor
LMax_M : Auto Lamp Max Time Minute (0 ~ 59) set on TV / Monitor
LMax_AP : Auto Lamp Max Time AM/PM set on TV / Monitor
LMaxValue : Auto Lamp Max value (0 ~ 100) set on TV / Monitor
LMin_H : Auto Lamp Min Time Hour (1 ~ 12) set on TV / Monitor
LMin_M : Auto Lamp Min Time Minute (0 ~ 59) set on TV / Monitor
LMin_AP : Auto Lamp Min Time AM/PM set on TV / Monitor
LMinValue : Auto Lamp Min value (0 ~ 100, 0xFF) set on TV / Monitor
LampValue : Manual Lamp Control value (0 ~ 100, 0xFF) set on TV / Monitor
ScreenInterval : Safety Screen Interval (Per Hour, 0(0ff)~10) set on TV / Monitor
ScreenTime : Safety Screen Time (Per Second, 0(off) ~5) set on TV / Monitor
ScreenType : Safety Screen Type (3 ~ 6) set on TV / Monitor
V.Wall : Video Wall Mode code set on TV / Monitor
V.WallFormat : Video Wall Format code set on TV / Monitor
V.WallDivid : Video Wall Divider code set on TV / Monitor
V.WallSet : Video Wall Set Number code set on TV / Monitor
Caution : If LMinValue is Returned to 0xFF then Auto Lamp Control is OFF.
If LampValue is Returned to 0xFF then Manual Lamp Control is OFF.
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x08
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
16
SEC- VD- DSW External Control - 0008
* Serial Number Control
●
Function
Personal Computer controls serial number of TV / Monitor.
●
Get SerialNum Status
Header Command
0xAA
0x0B
●
Data Length
ID
0
Ack SerialNum
Header Command
0xAA
0xFF
Val 3
Data3
Val 11
Val 4
Data4
ID
Val 5
Data5
Val 12
Data Length Ack/Nak
0x14
x14
Val 6
Data6
Val 13
r-CMD
0x0B
'A'
Val 7
Data7
Data14
Val 11
Val 12
Val 13
Val 14
Data1 ~ Data14 : Serial Number
Data15
Data15 ~ Data18
Data18 : Reserved
Val 9
Data9
Val 2
Data2
Val 10
Data10
Val 14
Data13
Data17
Data17
Data1
Data8
Data12
Data16
Data16
Val 1
Val 8
Data11
Data15
Data15
●
Check
Sum
Data18
Data18
Check
Sum
set on TV / Monitor.
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x0B
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
17
SEC- VD- DSW External Control - 0008
* Display Status Control
●
Function
Personal Computer shows display condition of TV / Monitor.
●
Get Maintenance Status
Header Command
0xAA
0x0D
●
Ack
Header Command
0xAA
0xFF
Val 3
Bright_Sensor
ID
ID
Val 4
No_Sync
Lamp : Lamp Error code (0
Temperature : Temperature
Monitor
Bright_Sensor
Data Length
0
Check
Sum
Data Length Ack/Nak
0x08
Val 5
Cur_Temp
'A'
Val 6
FAN
r-CMD
0x0D
Val 1
Val 2
Lamp Temperature
Check
Sum
: Normal, 1 : Error) to be set on TV / Monitor
Error code (0: Normal, 1: Error) to be set on TV /
: Brighte Sensor Error code (0: Normal, 1: Error) to be set on
TV/Monitor
No_Sync: Sync Error code(0: Normal, 1: Error, No Sync) to be set on TV / Monitor
Cur_Temp : Current temperature of TV / Monitor
FAN : Fan Error code (0 : Normal, 1 : Error) to be set on TV / Monitor
● Nak
Data Length Ack/Nak r-CMD
Header Command
Val 1
Check
ID
Sum
0xAA
0xFF
3
'N'
0x0D
ERR
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics
18
SEC- VD- DSW External Control - 0008
* SW Version Control
●
Function
Personal Computer shows version information of TV / Monitor.
●
Get Version Status
Header Command
0xAA
0x0E
●
ID
Ack
Header Command
0xAA
0xFF
Val 3
Val 4
ID
Data Length
0
Data Length Ack/Nak r-CMD
0x14
x14
Val 5
Val 6
Version3 Version4 Version5 Version6
Val 11
Version11
Val 12
Version12
Val 17
Val 18
Version17
Version17
Version18
Version18
Check
Sum
Val 13
Version13
'A'
Val 7
0x0E
Val 8
Val 1
Val 2
Version1 Version2
Val 9
Val 10
Version7
Version8 Version9 Version10
Val 14
Val 15
Val 16
Version14 Version15 Version16
Version16
Check
Sum
Version1 ~ Version12
Version12 : Project Info. of TV/Monitor
Version13
Version13 ~ Version18
Version18 : Software version of TV/Monitor
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x06
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
19
SEC- VD- DSW External Control - 0008
* Model Number Control
●
기능
Personal Computer가 TV / Monitor의 Model Number를 파악하여 보여준다.
●
Get Model Number Status
Header Command
ID
0xAA
0x10
●
Data Length
0
Check
Sum
Ack
Data Length Ack/Nak r-CMD Val 1 Val 2 Val 3 Check Sum
Header Command
ID
0xAA
0xFF
0x05
'A'
0x10 Species Model TV
0
Species : TV / Monitor에 사용된 패널의 종류
0x01
PDP
0x02
LCD
0x03
DLP
Model : TV / Monitor의 모델명
0x01
PPM50H2
SyncMaster 400DX(n)
0x02
PPM42S2
SyncMaster 460DX(n)
0x15
SyncMaster 700DX(n)
0x03
PS-42P2ST
SyncMaster 820DX(n)
0x04
PS-50P2HT
0x05
SyncMaster 400T
0x16
SyncMaster 460TX(n)
SyncMaster
400UX(n)
0x06
SyncMaster 403T
0x17
SyncMaster
0x07
PPM42S3, SPD-42P3SM
460UX(n)/460DR(n)
0x08
PPM50H3, SPD-50P3HM
SyncMaster 42TS/42PS
0x18
SyncMaster P42HP
0x09
PPM63H3, SPD-63P3HM
0x0A
PS-42P3ST
0x19
SyncMaster P50Hn
0x0B
SyncMaster 323T
0x1A
SyncMaster P50F(n)/P50FP
0x1B
SyncMaster P63F(n)/P63FP
SyncMaster 403T 0x0C
CT40CS(N)
0x1C
SyncMaster 320MX(n)
0x0D
PPMxxM5x
SyncMaster 400CX(n)
0x1D
SyncMaster 400MX(n)
SyncMaster 320P(n)
SyncMaster 400MP(n)
0x0E
SyncMaster 400P(n)
SyncMaster 460P(n)
SyncMaster 460CX(n)
0x20
SyncMaster 460MP(n)
SyncMaster 320PX
0x10
SyncMaster 400PX(n)
0x21
SyncMaster 520DX(n)
SyncMaster 460PX(n)
SyncMaster 400UXn-UD
0x22
SyncMaster 460UXn-UD
0x13
SyncMaster 400TX(n)
0x14
SyncMaster 570DX
0x23
SyncMaster 400FX(n)
0x15
SyncMaster 320DX
0x24
SyncMaster 460DRn-A
Display S/W, VD Business Team, Samsung Electronics
20
SEC- VD- DSW External Control
0x25
0x27
SyncMaster 460UTn-UD
0x26
SyncMaster 320MX(n)-2/MP
0x28
-2
SyncMaster 460MX(n)0x29
0x2A
2/FP(n)-2
0x2B
SyncMaster P50HP
0x2C
0x2D
SyncMaster P63FP
0x2E
0x2F
SyncMaster 400DXn-S
0x30
TV : TV / Monitor의 TV 지원 여부
0x00
TV 미지원
0x01
TV 지원
● Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : 발생된 오류가 무엇인지 나타내는 Error Code
SyncMaster 460UT(n)
SyncMaster 400MX(n)2/FP(n)-2
SyncMaster P42H-2
SyncMaster P50FP
SyncMaster 460Rn-S
SyncMaster 460DXn-S
r-CMD
0x10
Val 1
ERR
Check
Sum
21
SEC- VD- DSW External Control
* Power Control
●
Function
Personal Computer turns TV / Monitor power ON/OFF.
●
Get Power ON/OFF Status
Header Command
ID
0xAA
0x11
●
●
●
Data Length
0
Check
Sum
Set Power ON/OFF
Data Length Data 1
Header Command
ID
Power
0xAA
0x11
1
Power : Power code to be set on TV / Monitor
1
Power ON
0
Power OFF
Ack
Header Command
ID
0xAA
0xFF
Power : Same as above
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x11
r-CMD
0x11
Val 1
Check
Sum
Val 1
Check
Sum
Power
ERR
22
SEC- VD- DSW External Control - 0008
* Volume Control
●
Function
Personal Computer changes volume of TV / Monitor.
●
Get Volume Status
Header Command
0xAA
0x12
ID
Data Length
0
Check
Sum
●
Set Volume
Data Length Data 1
Header Command
Check
ID
Sum
Volume
0xAA
0x12
1
Volume : Volume value code to be set on TV/Monitor (0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Volume : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x12
r-CMD
0x12
Val 1
Check
Sum
Val 1
Check
Sum
Volume
ERR
Display S/W, VD Business Team, Samsung Electronics
23
SEC- VD- DSW External Control - 0008
* Mute Control
●
Function
Personal Computer turns TV / Monitor mute ON/OFF.
●
Get Mute ON/OFF Status
Header Command
ID
0xAA
0x13
●
●
●
Data Length
0
Check
Sum
Set Mute ON/OFF
Data Length Data 1
Header Command
ID
Mute
0xAA
0x13
1
Mute : Mute code to be set on TV / Monitor
1
Mute ON
0
Mute OFF
Ack
Header Command
0xAA
0xFF
Mute : Same as above
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x13
Val 1
Check
Sum
r-CMD
0x13
Val 1
Check
Sum
Mute
ERR
Display S/W, VD Business Team, Samsung Electronics
24
SEC- VD- DSW External Control - 0008
* Input Source Control
●
Function
Personal Computer changes input source of TV / Monitor.
●
Get Input Source Status
Header Command
0xAA
0x14
●
ID
Data Length
0
Check
Sum
Set Input Source
Data Length Data 1
Header Command
ID
0xAA
0x14
1
Input
Input : Input Source code to be set on TV / Monitor
0x14
PC
0x1E
BNC
0x18
DVI
0x0C
AV
0x04
S-Video
0x08
Component
0x20
MagicNet
0x1F
DVI_VIDEO
0x30
RF(TV)
0x40
DTV
0x21
HDMI
0x22
HDMI_PC
Caution : DVI_
DVI_VIDEO, HDMI_PC → Get Only
Check
Sum
In the case of MagicNet, only possible with models include MagicNet.
In the case of TV, only possible with models include TV.
●
●
Ack
Header Command
0xAA
0xFF
Input : Same as above
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x14
Val 1
Check
Sum
r-CMD
0x14
Val 1
Check
Sum
Input
ERR
Display S/W, VD Business Team, Samsung Electronics
25
SEC- VD- DSW External Control
* Picture Size Control
●
Function
Personal Computer changes Picture Size of TV / Monitor.
Cannot control when Video Wall is on.
●
Get Picture Size Status
Header Command
0xAA
0x15
●
ID
Data Length
0
Check
Sum
Set Picture Size
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x15
1
Aspect
Aspect : Picture Size code to be set on TV / Monitor
PC1, PC2, DVI,
DVI, BNC,HDMI_PC
0x10
0x18
16 : 9
4:3
0x00
0x01
0x04
0x05
0x06
Auto Wide
16 : 9
Zoom
Zoom1
Zoom2
0x31
0x0B
0x0C
Wide Zoom
4:3
AV, S-VIdeo,
Component,,DVI_Video,HDMI_Video
Component
0x09
Just Scan
Wide Fit
Caution :For some Image, Picture sizes are not supported depending on some
input signals (720p, 1080i).
For MFM model only possible for those include Europe TV if size is Auto Wide.
●
●
Ack
Header Command
ID
0xAA
0xFF
Aspect : Same as above
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x15
r-CMD
0x15
Val 1
Check
Sum
Val 1
Check
Sum
Aspect
ERR
26
SEC- VD- DSW External Control
* Direct Channel Control (DTV)
Caution : Only works with models include TV.
● Function
Personal Computer can control TV Channel.
Get Channel
Header Command
0xAA
0x17
●
●
0
Check
Sum
Set Channel
Header Command
0xAA
Data 5
CH_NUM
(Low)
●
Data Length
ID
0x17
Data 6
Data 7
Val 4
ID
Reserved
Data 3
Data 4
0x0A Country ATV_DTV AirCable CH_NUM
(Hgh)
Data 8
Data 9
Data Length Ack/Nak
0x0C
Val 5
Val 6
CH_NUM
AirCable CH_NUM
(Hgh)
(Low)
Val 10
Data 2
Minor_CH Reserved
Sel_Minor Minor_CH
(Hgh)
(Low)
Ack
Header Command
0xAA
0xFF
Val 3
ID
Data
Length Data 1
Sel_Minor
'A'
Data 10
Reserved
r-CMD
0x17
Val 7
Val 1
Check
Sum
Val 2
Country ATV_DTV
Val 8
Val 9
Minor_CH Minor_CH Reserved
(Hgh)
(Low)
Check
Sum
Country : Select the country to be
ATV_DTV : Select Analog TV and
set on TV / Monitor (0 : Korea, 1: USA, .... )
DTV to be set on TV / Monitor ( 0 : Analog TV,
1: Digital TV)
AirCalbe : Select if TV is cabled or general ( 0 : general, 1: cabled)
CH_NUM : TV channel number to be set on TV / Monitor ( Analog TV : 1 ~ 135 ,
Digital TV : 0 ~ 999)
Sel_Minor : Select minor channel when DTV is to be set on TV / Monitor( 0 : minor
channel not selected. 1: minor channel selected.)
Minor_CH : Select minor channel number when DTV is to be set on TV / Monitor
( 0 ~ 999.)
●
Nak
Header Command
ID
Data Length Ack/Nak
r-CMD
Val 1
Check
27
SEC- VD- DSW External Control - 0008
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
0x17
ERR
Sum
Display S/W, VD Business Team, Samsung Electronics
28
SEC- VD- DSW External Control
* Screen Mode Control
●
Function
Personal Computer changes screen mode of TV / Monitor.
Cannot control when Video Wall is on and only operates when Picture Size is Auto
Wide.
●
Get Screen Mode Status
Header Command
ID
0xAA
0x18
Data Length
0
Check
Sum
●
Set Picture Size
Data Length Data 1
Header Command
Check
ID
Sum
ScrMode
0xAA
0x18
1
ScrMode : Screen Mode Code to be set on TV / Monitor
0x01
16 : 9
0x04
Zoom
0x31
Wide Zoom
0x0B
4:3
●
Ack
Header Command
ID
0xAA
0xFF
ScrMode : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x18
r-CMD
0x18
Val 1
Check
Sum
Val 1
Check
Sum
ScrMode
ERR
29
SEC- VD- DSW External Control
* Screen Size Control
●
Function
Personal Computer recognizes the screen size of TV / Monitor.
●
Get Screen Size Status
Header Command
0xAA
0x19
●
Ack
Header Command
0xAA
0xFF
Screen Size
●
ID
ID
Data Length
0
Check
Sum
Data Length Ack/Nak
3
'A'
r-CMD
0x19
Val 1
Screen
Size
Check
Sum
: Screen size of TV / Monitor (Range: 0 ~ 255, Unit: Inch)
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x19
Val 1
ERR
Check
Sum
30
SEC- VD- DSW External Control
* Red Offset Control
●
Function
Personal Computer changes R Offset from Signal Control function of TV / Monitor.
※ Signal Control R Offset Control only operates when Signal Balance is on and
current input source is PC and BNC.
●
Get Signal Control R Offset Status
Data Length
Header Command
ID
0xAA
0x1A
0
Check
Sum
●
Set Signal Control R Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x1A
1
R Offset
R Offset : R Gain value to be set on TV/Monitor (0 ~ 100)
●
Ack
Header Command
ID
0xAA
0xFF
R Offset : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x1A
r-CMD
0x1A
Val 1
Check
Sum
Val 1
Check
Sum
R Offset
ERR
31
SEC- VD- DSW External Control
* Green Offset Control
●
Function
Personal Computer changes G Offset from Signal Control function of TV / Monitor.
※ Signal Control G Offset Control only operates when Signal Balance is on and
current input source is PC and BNC.
●
Get Signal Control G Offset Status
Data Length
Header Command
ID
0xAA
0x1B
0
Check
Sum
●
Set Signal Control G Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x1B
1
G Offset
G Offset : G Offset value to be set on TV/Monitor (0 ~ 100)
●
Ack
Header Command
ID
0xAA
0xFF
G Offset : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x1B
r-CMD
0x1B
Val 1
Check
Sum
Val 1
Check
Sum
G Offset
ERR
32
SEC- VD- DSW External Control
* Blue Offset Control
●
Function
Personal Computer changes B Offset from Signal Control function of TV / Monitor.
※ Signal Control B Offset Control only operates when Signal Balance is on and
current input source is PC and BNC.
●
Get Signal Control B Offset Status
Data Length
Header Command
ID
0xAA
0x1C
0
Check
Sum
●
Set Signal Control B Offset
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x1C
1
B Offset
B Offset : B Offset value to be set on TV/Monitor (0 ~ 100)
●
Ack
Header Command
ID
0xAA
0xFF
B Offset : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x1C
r-CMD
0x1C
Val 1
Check
Sum
Val 1
Check
Sum
B Offset
ERR
33
SEC- VD- DSW External Control - 0008
* Contrast Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes contrast of TV / Monitor.
●
Get Contrast Status
Header Command
0xAA
0x24
ID
Data Length
0
Check
Sum
●
Set Contrast
Data Length Data 1
Header Command
Check
ID
Sum
Contrast
0xAA
0x24
1
Contrast : Contrast value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Contrast : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x24
r-CMD
0x24
Val 1
Check
Sum
Val 1
Check
Sum
Contrast
ERR
Display S/W, VD Business Team, Samsung Electronics
34
SEC- VD- DSW External Control - 0008
* Brightness Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes brightness of TV / Monitor.
●
Get Brightness Status
Header Command
0xAA
0x25
ID
Data Length
0
Check
Sum
●
Set Brightness
Data Length Data 1
Header Command
Check
ID
Sum
Brightness
0xAA
0x25
1
Brightness : Brightness value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Brightness : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x25 Brightness
Check
Sum
r-CMD
0x25
Check
Sum
Val 1
ERR
Display S/W, VD Business Team, Samsung Electronics
35
SEC- VD- DSW External Control - 0008
* Sharpness Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes sharpness of TV / Monitor의.
●
Get Sharpness Status
Header Command
0xAA
0x26
ID
Data Length
0
Check
Sum
●
Set Sharpness
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x26
1
Sharpness
Sharpness : Sharpness value code to be set on TV/Monitor ( 0 ~ 100 )
Caution : Sharpness could only be set in 50 Steps (0, 10, 20, 30... 100)
●
Ack
Header Command
ID
0xAA
0xFF
Sharpness : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x26 Sharpness
Check
Sum
r-CMD
0x26
Check
Sum
Val 1
ERR
Display S/W, VD Business Team, Samsung Electronics
36
SEC- VD- DSW External Control - 0008
* Color Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes the color of TV / Monitor.
●
Get Color Status
Header Command
0xAA
0x27
ID
Data Length
0
Check
Sum
●
Set Color
Data Length Data 1
Header Command
Check
ID
Sum
Color
0xAA
0x27
1
Color : Color value code to be set on TV/Monitor( 0 ~ 100 )
●
Ack
Header Command
0xAA
0xFF
Color : Same as above
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x27
Val 1
Check
Sum
r-CMD
0x27
Val 1
Check
Sum
Color
ERR
Display S/W, VD Business Team, Samsung Electronics
37
SEC- VD- DSW External Control - 0008
* Tint Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes tint of TV / Monitor when visual display is NTSC.
Does not operate with PAL signals.
●
Get Tint Status
Header Command
0xAA
0x28
ID
Data Length
0
Check
Sum
●
Set Tint
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x28
1
Tint
Tint : Tint value code to be set on TV/Monitor (0 ~ 100 )
R
Tint Value
G
(100 - Tint) Value
●
Ack
Header Command
0xAA
0xFF
Tint : Same as above
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x28
Val 1
Check
Sum
r-CMD
0x28
Val 1
Check
Sum
Tint
ERR
Display S/W, VD Business Team, Samsung Electronics
38
SEC- VD- DSW External Control - 0008
* Red Gain Control
●
Function
Personal Computer changes Red Gain of TV / Monitor.
●
Get Red Gain Status
Header Command
0xAA
0x29
ID
Data Length
0
Check
Sum
●
Set Red Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x29
1
Red
Red : Red Gain value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
0xAA
0xFF
Red : Same as above
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x29
Val 1
Check
Sum
r-CMD
0x29
Val 1
Check
Sum
Red
ERR
Display S/W, VD Business Team, Samsung Electronics
39
SEC- VD- DSW External Control - 0008
* Green Gain Control
●
Function
Personal Computer changes Green Gain of TV / Monitor.
●
Get Green Gain Status
Header Command
0xAA
0x2A
ID
Data Length
0
Check
Sum
●
Set Green Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x2A
1
Green
Green : Green Gain value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Green : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x2A
r-CMD
0x2A
Val 1
Check
Sum
Val 1
Check
Sum
Green
ERR
Display S/W, VD Business Team, Samsung Electronics
40
SEC- VD- DSW External Control - 0008
* Blue Gain Control
●
Function
Personal Computer changes Blue Gain of TV / Monitor.
●
Get Blue Gain Status
Header Command
0xAA
0x2B
ID
Data Length
0
Check
Sum
●
Set Blue Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x2B
1
Blue
Blue : Blue Gain value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
0xAA
0xFF
Blue : Same as above
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x2B
Val 1
Check
Sum
r-CMD
0x2B
Val 1
Check
Sum
Blue
ERR
Display S/W, VD Business Team, Samsung Electronics
41
SEC- VD- DSW External Control - 0008
* Treble Control
●
Function
Personal Computer changes Treble of TV / Monitor.
●
Get Treble Status
Header Command
0xAA
0x2C
ID
Data Length
0
Check
Sum
●
Set Treble
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x2C
1
Treble
Treble : Treble value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Treble : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x2C
r-CMD
0x2C
Val 1
Check
Sum
Val 1
Check
Sum
Treble
ERR
Display S/W, VD Business Team, Samsung Electronics
42
SEC- VD- DSW External Control - 0008
* Bass Control
●
Function
Personal Computer changes Bass of TV / Monitor.
●
Get Bass Status
Header Command
0xAA
0x2D
●
●
●
ID
Data Length
0
Check
Sum
Set Bass
Data Length Data 1
Header Command
ID
0xAA
0x2D
1
Bass
Bass : Bass value code ( 0 ~ 100 )
Check
Sum
Ack
Header Command
0xAA
0xFF
Bass : Same as above
r-CMD
0x2D
Val 1
Check
Sum
r-CMD
0x2D
Val 1
Check
Sum
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Bass
ERR
Display S/W, VD Business Team, Samsung Electronics
43
SEC- VD- DSW External Control - 0008
* Balance Control
●
Function
Personal Computer changes Balance of TV / Monitor.
●
Get Balance Status
Header Command
0xAA
0x2E
ID
Data Length
0
Check
Sum
●
Set Balance
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x2E
1
Balance
Balance : Balance value code to be set on TV/Monitor ( 0 ~ 100 )
L
(100 - Balance) Value
R
Balance Value
●
Ack
Header Command
ID
0xAA
0xFF
Balance : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x2E
r-CMD
0x2E
Val 1
Check
Sum
Val 1
Check
Sum
Balance
ERR
Display S/W, VD Business Team, Samsung Electronics
44
SEC- VD- DSW External Control - 0008
* Coarse Control (PC, BNC Only)
●
Function
Personal Computer adjusts Coarse of TV / Monitor.
●
Get Coarse Status
None
●
Set Coarse
Data Length Data 1
Header Command
Check
ID
Sum
Coarse
0xAA
0x2F
1
Coarse : Coarse Increase/Decrease code to be set on TV/Monitor
1
Increase
0
Decrease
●
Ack
Header Command
ID
0xAA
0xFF
Coarse : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x2F
r-CMD
0x2F
Val 1
Check
Sum
Val 1
Check
Sum
Coarse
ERR
Display S/W, VD Business Team, Samsung Electronics
45
SEC- VD- DSW External Control - 0008
* Fine Control (PC, BNC Only)
●
Function
Personal Computer adjusts Fine of TV / Monitor.
●
Get Fine Status
None
●
Set Fine
Data Length Data 1
Header Command
ID
Fine
0xAA
0x30
1
Fine : Phase Increase/Decrease code
1
Increase
0
Decrease
●
●
Ack
Header Command
0xAA
0xFF
Fine : Same as above
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x30
Val 1
Check
Sum
r-CMD
0x30
Val 1
Check
Sum
Fine
ERR
Display S/W, VD Business Team, Samsung Electronics
46
SEC- VD- DSW External Control - 0008
* H- Position Control (PC, BNC Only)
●
Function
Personal Computer adjusts Horizontal Position of TV / Monitor.
●
Get H-Position Status
None
●
Set H-Position
Data Length Data 1
Header Command
Check
ID
Sum
H-Pos
0xAA
0x31
1
H-Pos : H-Position Increase/Decrease code to be set on TV/Monitor
1
Move to Right
0
Move to Left
●
Ack
Header Command
ID
0xAA
0xFF
H-Pos : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x31
r-CMD
0x31
Val 1
Check
Sum
Val 1
Check
Sum
H-Pos
ERR
Display S/W, VD Business Team, Samsung Electronics
47
SEC- VD- DSW External Control - 0008
* V- Position Control (PC, BNC Only)
●
Function
Personal Computer adjusts Vertical Position of TV/Monitor.
●
Get V-Position Status
None
●
Set V-Position
Data Length Data 1
Header Command
Check
ID
Sum
V-Pos
0xAA
0x32
1
V-Pos : V-Position Increase/Decrease code to be set on TV/Monitor
1
Move Down
0
Move Up
●
Ack
Header Command
ID
0xAA
0xFF
V-Pos : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x32
r-CMD
0x32
Val 1
Check
Sum
Val 1
Check
Sum
V-Pos
ERR
Display S/W, VD Business Team, Samsung Electronics
48
SEC- VD- DSW External Control - 0008
* Clear Menu Control
●
Function
Personal Computer removes Menu OSD left in TV / Monitor.
●
Get Clear Menu Status
None
●
Set Clear Menu
Header Command
0xAA
0x34
Clear : 0x00 (Always)
●
●
Ack
Header Command
0xAA
0xFF
ID
ID
Data Length
1
Data 1
Clear
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x34
Val 1
Check
Sum
r-CMD
0x34
Val 1
Check
Sum
Clear
ERR
Display S/W, VD Business Team, Samsung Electronics
49
SEC- VD- DSW External Control - 0008
* Remote Control
Function
Personal Computer enables/disables IR receiving function of TV/Monitor/
Can operate regardless of whether power is ON/OFF
●
●
Get Remote Status
Header Command
0xAA
0x36
ID
Data Length
0
Check
Sum
Set Remote Enable/Disable
Data Length Data 1
Header Command
ID
RMC
0xAA
0x36
1
RMC : Power code to be set on TV/Remocon
1
Remocon Enable
0
Remocon Disable
●
Ack
Header Command
0xAA
0xFF
RMC : Same as above
Check
Sum
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x36
Val 1
Check
Sum
r-CMD
0x36
Val 1
Check
Sum
RMC
●
ERR
Display S/W, VD Business Team, Samsung Electronics
50
SEC- VD- DSW External Control - 0008
* RGB Contrast Control (PC, BNC, DVI Only)
●
Function
Personal Computer changes contrast of TV / Monitor when Input Source is PC.
●
Get Contrast Status
Header Command
0xAA
0x37
ID
Data Length
0
Check
Sum
●
Set Contrast
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x37
1
Contrast
Contrast : RGB Contrast value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Contrast : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x37
r-CMD
0x37
Val 1
Check
Sum
Val 1
Check
Sum
Contrast
ERR
Display S/W, VD Business Team, Samsung Electronics
51
SEC- VD- DSW External Control - 0008
* RGB Brightness Control (PC, BNC, DVI Only)
●
Function
Personal Computer changes Brightness when Input Source of TV / Monitor is PC.
●
Get Brightness Status
Header Command
0xAA
0x38
ID
Data Length
0
Check
Sum
●
Set Brightness
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x38
1
Brightness
Brightness : RGB Brightness value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Brightness : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x38 Brightness
Check
Sum
r-CMD
0x38
Check
Sum
Val 1
ERR
Display S/W, VD Business Team, Samsung Electronics
52
SEC- VD- DSW External Control - 0008
* Auto Adjustment Control (PC, BNC Only)
●
Function
Personal Computer controls PC system screen automatically.
●
Get Auto Adjustment Status
None
●
Set Auto Adjustment
Header Command
0xAA
0x3D
Auto : 0x00 (Always)
●
●
Ack
Header Command
0xAA
0xFF
ID
ID
Data Length
1
Data 1
Auto
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x3D
Val 1
Check
Sum
r-CMD
0x3D
Val 1
Check
Sum
Auto
ERR
Display S/W, VD Business Team, Samsung Electronics
53
SEC- VD- DSW External Control - 0008
* Color Tone Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes Color Tone of TV / Monitor.
●
Get Color Tone Status
Header Command
0xAA
0x3E
ID
Data Length
0
Check
Sum
●
Set Color Tone
Data Length Data 1
Header Command
Check
ID
0xAA
0x3E
1
Color Tone Sum
Color Tone : Color Tone value code to be set on TV/Monitor ( 0 ~ 4 )
0x00
Cool 2
0x01
Cool 1
0x02
Normal
0x03
Warm 1
0x04
Warm 2
0x50
Off
●
Ack
Header Command
ID
0xAA
0xFF
Brightness : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
Check
0x3E Color Tone Sum
r-CMD
0x3E
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
54
SEC- VD- DSW External Control - 0008
* Color Temperature Control
●
Function
Personal Computer changes Color Temperature value of TV / Monitor.
Only operates when Color Tone is set to Off.
●
Get C_Temp Status
Header Command
0xAA
0x3F
ID
Data Length
0
Check
Sum
●
Set C_Temp
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x3F
1
C_Temp
C_Temp : Color Temperature value code to be set on TV/Monitor ( 0 ~ 10 )
●
Ack
Header Command
ID
0xAA
0xFF
C_Temp : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x3F
r-CMD
0x3F
Val 1
Check
Sum
Val 1
Check
Sum
C_Temp
ERR
Display S/W, VD Business Team, Samsung Electronics
55
SEC- VD- DSW External Control - 0008
* Pixel Shift Control
●
Function
Personal Computer controls Pixel Shift function of TV / Monitor.
Cannot control when Video Wall is on or when Zoom(0x39) is set or when Input
Signal is VESA Mode in DVI.
●
Get Pixel Shift Status
Header Command
0xAA
0x4C
●
Set Pixel Shift
Header Command
0xAA
0x4C
ID
ID
Data Length
0
Check
Sum
Data Length
Data 1
0x04
Shift
Data 2
H.Dot
Data 3
V.Line
Data 4
S.Time
Check
Sum
Shift : Pixel Shift On/Off Code to be set on TV/Monitor
Caution : If Shift value is off, H.Dot, V.Line, S.Time values are ignored in TV /
Monitor.
1
0
ON
OFF
H.Dot : Horizontal Dot value code set on TV/Monitor (0 ~ 4)
V.Line : Vertical Line value code set on TV/Monitor (0 ~ 4)
S.Time : Shift Time value code set on TV/Monitor (1 ~ 4)
●
Ack
Header Command
0xAA
0xFF
Val 3
V.Line
Val 4
S.Time
0x06
'A'
r-CMD
0x4C
Val 1
Val 2
Shift
H.Dot
r-CMD
0x4C
Val 1
Check
Sum
Check
Sum
Shift, H.Dot, V.Line, S.Time
●
Data Length Ack/Nak
ID
: Same as above
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
ERR
Display S/W, VD Business Team, Samsung Electronics
56
SEC- VD- DSW External Control - 0008
* Auto Lamp Control
●
Function
Personal Computer sets Auto Lamp Function of TV / Monitor.
When Manual Lamp Control is on, Auto Lamp Control will automatically turn off.
●
Get Auto Lamp
Header Command
0xAA
0x57
●
Set Auto Lamp
Header Command
0xAA
0x57
Data 5
LMin_H
●
Val 3
Check
Sum
Data Length Data 1
8
Data 7
LMin_M
Val 4
0
ID
Data 6
Ack
Header Command
0xAA
0xFF
Data Length
ID
LMin_AP
ID
Val 5
Data 2
Data 3
Data 4
Val 1
Val 2
LMax_H LMax_M LMax_AP LMaxValue
Data 8
LMinValue
Data Length Ack/Nak
Check
Sum
0x0A
'A'
r-CMD
0x57
Val 6
Val 7
Val 8
LMax_H
LMax_M
Check
Sum
LMax_AP LMaxValue LMin_H LMin_M LMin_AP LMinValue
LMax_H : Auto Lamp Max Time Hour set on TV/Monitor (1 ~ 12)
LMax_M : Auto Lamp Max Time Minute set on TV/Monitor (0 ~ 59)
LMax_AP : Auto Lamp Max Time set on TV/Monitor AM/PM
LMaxValue : Auto Lamp Max Value set on TV/Monitor (0 ~ 100)
LMin_H : Auto Lamp Min Time Hour set on TV/Monitor (1 ~ 12)
LMin_M : Auto Lamp Min Time Minute set on TV/Monitor (0 ~ 59)
LMin_AP : Auto Lamp Min Time set on TV/Monitor AM/PM
LMinValue : Auto Lamp Min Value set on TV/Monitor (0 ~ 100)
Caution: When LMinValue is Returned to 0xFF, Auto Lamp Control is off.
When Dynamic contrast is on, Auto Lamp Control does not operate.
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x57
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
57
SEC- VD- DSW External Control - 0008
* Manual Lamp Control
●
Function
Personal Computer sets Manual Lamp Function of TV / Monitor.
When Auto Lamp Control is on, Manual Lamp Control will automatically turn off.
●
●
Get Manual Lamp Status
Header Command
ID
0xAA
0x58
Data Length
0
Check
Sum
Set Manual Lamp
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x58
1
LampValue
LampValue : Manual Lamp value to be set on TV/Monitor (0 ~ 100)
Ack
Data Length Ack/Nak r-CMD
Header Command
Val 1
Check
ID
0xAA
0xFF
3
'A'
0x58 LampValue Sum
LampValue : Same as above
Caution : When LampValue is Returned to 0xFF, Manual Lamp Control is off.
When Dynamic contrast is on, Manual Lamp Control does not operate.
● Nak
Data Length Ack/Nak r-CMD
Header Command
Val 1
Check
ID
Sum
0xAA
0xFF
3
'N'
0x58
ERR
ERR : Error code that shows what occurred error is
●
Display S/W, VD Business Team, Samsung Electronics
58
SEC- VD- DSW External Control - 0008
* Safety Screen Run Control
●
Function
Personal Computer will make Safety Screen function to operate immediately, not by
Timer operation.
●
Get Safety Screen Run Status
Header Command
ID
0xAA
0x59
●
Set
Data Length
Check
Sum
Data Length
Data 1
0
Safety Screen Run
Header Command
0xAA
0x59
ID
1
Safety
Screen
Type
Check
Sum
: Safety Screen Type to be set on TV/Monitor (1~6)
Off
Signal Pattern
All White
Scroll
Bar
Eraser
Safety Screen Type
0
1
2
3
4
6
●
Ack
Header Command
0xAA
0xFF
Safety Screen Type
●
ID
Data Length Ack/Nak
3
'A'
r-CMD
0x59
Val 1
Safety
Screen
Type
Check
Sum
Val 1
Check
Sum
: Same as above
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x59
ERR
Display S/W, VD Business Team, Samsung Electronics
59
SEC- VD- DSW External Control - 0008
* SBP Timer Control (TV)
●
Function
Personal Computer sets Screen Burn Protection Timer of TV/Monitor.
●
Get SBP Timer Status
Header Command
0xAA
0x5B
ID
Data Length
0
Check
Sum
●
Set SBP Timer
Data Length Data 1 Data 2 Data 3
Header Command
Check
ID
Sum
Timer T.Period T.Time
0xAA
0x5B
3
Timer : SBP Timer code to be set on TV/Monitor
0
OFF
1
Pattern
2
All White
3
Inverse
4
Bar
5
Bar & Inverse
T.Period : SBP Timer Period value code to be set on TV/Monitor (1~24 Hr.)
T.Time : SBP Timer Time value code set on TV/Monitor (1~30 min.)
●
Ack
Header Command
0xAA
0xFF
Val 3
T.Time
Data Length Ack/Nak
5
'A'
r-CMD
0x5B
Val 1
Val 2
Timer
T.Period
Val 1
Check
Sum
Check
Sum
Timer, T.Period, T.Time
●
ID
: Same as above
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x5B
ERR
Display S/W, VD Business Team, Samsung Electronics
60
SEC- VD- DSW External Control
* Video Wall Mode Control
●
Function
Personal Computer converts Video Wall Mode of TV / Monitor when Video Wall is
ON.
Only works with TV/Monitor where Video Wall is on.
Does not operate in MagicNet.
●
Get Video Wall Mode
Header Command
0xAA
0x5C
ID
Data Length
0
Check
Sum
●
Set Video Wall Mode
Data Length Data 1
Header Command
Check
ID
Sum
WallMode
0xAA
0x5C
1
WallMode : Video Wall Mode code to be set on TV/Monitor
1
Full
0
Natural
●
Ack
Header Command
ID
0xAA
0xFF
WallMode : same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x5C WallMode
Check
Sum
r-CMD
0x5C
Check
Sum
Val 1
ERR
61
SEC- VD- DSW External Control - 0008
* Safety Lock
Function
Personal Computer turns Safety Lock function of TV/Monitor On/Off.
전원 On/Off 여부와 상관없이 동작할 수 있다.
●
●
Get Safety Lock Status
Header Command
ID
0xAA
0x5D
Data Length
0
Check
Sum
Set Safety Lock Enable/Disable
Data Length Data 1
Header Command
ID
0xAA
0x5D
1
Lock
Lock : Lock code to be set on TV/Monitor
1
On
0
Off
●
Ack
Header Command
0xAA
0xFF
Lock : Same as above
Check
Sum
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x5D
Val 1
Check
Sum
r-CMD
0x5D
Val 1
Check
Sum
Lock
●
Lock
Display S/W, VD Business Team, Samsung Electronics
62
SEC- VD- DSW External Control - 0008
* Panel Lock
●
Function
Personal Computer turns Panel function Key Lock of TV/Monitor On/OFF.
Can operate regardless of whether power is on/off.
●
Get Panel Lock Status
Header Command
0xAA
0x5F
ID
Data Length
0
Check
Sum
●
Set Panel Lock
Data Length
Header Command
Data 1
Check
ID
Sum
0xAA
0x5F
1
Panel Lock
Panel Lock : Panel Key Lock On/Off code to be set on TV/Monitor
1
Lock
0
Unlock
●
Ack
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'A'
Panel Lock : Same as above
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x5F
r-CMD
0x5F
Val 1
Panel Lock
Val 1
ERR
Check
Sum
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
63
SEC- VD- DSW External Control - 0008
* OSD On/ Off
●
Function
Personal Computer turns OSD of TV / Monitor On/Off.
When OSD is on, OSD will be shown on screen
When OSD is off, OSD will not shown on screen at all
●
Get OSD Enable Status
Header Command
0xAA
0x70
●
●
●
ID
Data Length
0
Check
Sum
Set OSD Enable/Disable
Data Length Data 1
Header Command
ID
0xAA
0x70
1
OSD
OSD : OSD On/Off code to be set on TV/Monitor
1
OSD On
0
OSD Off
Ack
Header Command
0xAA
0xFF
OSD : Same as above
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x70
Val 1
Check
Sum
r-CMD
0x70
Val 1
Check
Sum
OSD
ERR
Display S/W, VD Business Team, Samsung Electronics
64
SEC- VD- DSW External Control
* P.Mode Control
●
Function
Personal Computer changes Picture Mode of TV / Monitor.
●
Get PMode Status
Header Command
0xAA
0x71
ID
Data Length
0
Check
Sum
●
Set PMode
Data Length Data 1
Header Command
Check
ID
Sum
PMode
0xAA
0x71
1
PMode : Picture Mode code to be set on TV/Monitor
Source
Data
Mode
0x00
Dynamic
AV
0x01
Standard
S-Video
Component
0x02
Movie
HDCP
0x03
Custom
( TV )
0x50
Off
0x10
Entertain
PC
0x11
Internet
BNC
0x12
Text
DVI
0x13
Custom
( MagicNet )
0x50
Off
Caution : Dynamic Contrast will not operate in any other mode except Off mode.
●
Ack
Header Command
ID
0xAA
0xFF
PMode : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x71
r-CMD
0x71
Val 1
Check
Sum
Val 1
Check
Sum
PMode
ERR
65
SEC- VD- DSW External Control
* S.Mode Control
●
Function
Personal Computer changes Sound Mode of TV / Monitor.
●
Get SMode Status
Header Command
0xAA
0x72
●
●
●
ID
Data Length
0
Check
Sum
Set SMode
Data Length Data 1
Header Command
ID
SMode
0xAA
0x72
1
SMode : Sound Mode code to be set on TV/Monitor
Data
Mode
0x00
Standard
0x01
Music
0x02
Movie
0x03
Speech
0x04
Custom
Ack
Header Command
ID
0xAA
0xFF
SMode : Same as above
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x72
r-CMD
0x72
Val 1
Check
Sum
Val 1
Check
Sum
SMode
ERR
66
SEC- VD- DSW External Control - 0008
* NR Mode Set (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes Digital NR mode.
●
Get NR Mode Status
Header Command
0xAA
0x73
ID
Data Length
0
Check
Sum
●
Set NR Mode
Data Length Data 1
Header Command
Check
ID
Sum
NR Mode
0xAA
0x73
1
NR Mode : NR Mode On/Off code to be set on TV/Monitor
1
NR Mode On
0
NR Mode Off
●
Ack
Header Command
ID
0xAA
0xFF
NR Mode : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x73 NR Mode
Check
Sum
r-CMD
0x73
Check
Sum
Val 1
ERR
Display S/W, VD Business Team, Samsung Electronics
67
SEC- VD- DSW External Control - 0008
* PC Color Tone Control (PC, BNC, DVI Only)
●
Function
Personal Computer can change color tone of Monitor.
●
Get Color Tone Status
Header Command
0xAA
0x75
ID
Data Length
0
Check
Sum
●
Set Color Tone
Data Length
Header Command
Data 1
Check
ID
Sum
Color Tone
0xAA
0x75
1
Color Tone : Color Tone value code to set on TV/Monitor (0 ~ 3)
Source
Data
Mode
0x00
Custom
0x01
Cool
PC
DVI
0x02
Normal
BNC
0x03
Warm
0x50
Off
●
Ack
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'A'
Color Tone : Same as above
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x75
r-CMD
0x75
Val 1
Color Tone
Val 1
ERR
Check
Sum
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
68
SEC- VD- DSW External Control - 0008
* Auto AutoAdjustment
●
Function
Personal Computer can Enable/Disable Auto Adjustment function.
On 되었을 경우에만 Auto Auto Adjustment 기능이 동작된다.
●
Get A.Adjustment Status
Header Command
0xAA
0x76
ID
Data Length
0
Check
Sum
●
Set A.Adjustment
Data Length
Header Command
Data 1
Check
ID
Sum
0xAA
0x76
1
A.Adjustment
A.Adjustment : Auto Auto Adjustment Value Code to be set on TV/Monitor
1
Enable
0
Disable
●
Ack
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'A'
A.Adjustment : Same as above
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x76
r-CMD
0x76
Val 1
Check
Sum
Val 1
Check
Sum
A.Adjustment
ERR
Display S/W, VD Business Team, Samsung Electronics
69
SEC- VD- DSW External Control - 0008
* All Keys Lock
●
Function
Personal Computer turns both REMOCON and Panel Key Lock function on/off.
Can operate regardless of whether power is on/off.
●
Get All Key Status
Header Command
0xAA
0x77
ID
Data Length
0
Check
Sum
●
Set All Key Lock/Unlock
Data Length
Header Command
Data 1
Check
ID
Sum
0xAA
0x77
1
All Key
All Key : Lock On/Off code of every Key to be set on TV/Monitor
1
Lock
0
Unlock
●
Ack
Header Command
ID
0xAA
0xFF
All Key : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x77
r-CMD
0x77
Val 1
All Key
Val 1
ERR
Check
Sum
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
70
SEC- VD- DSW External Control - 0008
61) SRS TS XT Control
●
Function
Personal Computer turns SRS TS XT of TV / Monitor on/off.
Can only operate with TV/Monitor that has SRS TS XT function.
●
Get SRS TS XT Status
Header Command
0xAA
0x78
●
●
●
ID
Data Length
0
Check
Sum
Set SRS TSXT
Data Length
Header Command
Data 1
ID
0xAA
0x78
1
SRS
SRS : SRS TS XT code to be set on TV/Monitor
1
SRS ON
0
SRS OFF
Ack
Header Command
0xAA
0xFF
SRS : Same as above
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check Sum
r-CMD
0x78
Val 1
Check
Sum
r-CMD
0x78
Val 1
Check
Sum
SRS
ERR
Display S/W, VD Business Team, Samsung Electronics
71
SEC- VD- DSW External Control - 0008
62)
Film Mode Control
●
Function
Personal Computer turns Film Mode of TV / Monitor on/off.
●
Get Film Mode Status
Header Command
0xAA
0x79
●
●
●
ID
Data Length
0
Check
Sum
Set Film Mode
Data Length
Header Command
Data 1
ID
0xAA
0x79
1
FMode
FMode : Film Mode code to be set on TV/Monitor
1
Film Mode ON
0
Film Mode OFF
Ack
Header Command
ID
0xAA
0xFF
FMode : Same as above
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check Sum
r-CMD
0x79
r-CMD
0x79
Val 1
Check
Sum
Val 1
Check
Sum
FMode
ERR
Display S/W, VD Business Team, Samsung Electronics
72
SEC- VD- DSW External Control - 0008
63) Signal Balance ( PC, BNC Only)
●
Function
Personal Computer turns Signal Balance of TV / Monitor ON/OFF.
●
Get Signal Balance Status
Header Command
ID
0xAA
0x7A
Data Length
0
Check
Sum
●
Set Signal Balance
Data Length
Header Command
Data 1
ID
Check Sum
0xAA
0x7A
1
SBalance
SBalance : Signal Balance code to be set on TV/Monitor
1
Signal Balance ON
0
Signal Balance OFF
●
Ack
Header Command
ID
0xAA
0xFF
SBalance : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x7A
r-CMD
0x7A
Val 1
Check
Sum
Val 1
Check
Sum
SBalance
ERR
Display S/W, VD Business Team, Samsung Electronics
73
SEC- VD- DSW External Control - 0008
64) SB Red Gain ( PC, BNC Only)
●
Function
Personal Computer changes Red Gain value of Monitor Signal Balance.
●
Get SB Red Gain Status
Header Command
ID
0xAA
0x7B
Data Length
0
Check
Sum
●
Set SB Red Gain
Data Length Data 1
Header Command
Check
ID
Sum
SB R Gain
0xAA
0x7B
1
SB R Gain : Phase B value code of Signal Balance to be set on Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
SB R Gain : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x7B SB R Gain
Check
Sum
r-CMD
0x7B
Check
Sum
Val 1
ERR
Display S/W, VD Business Team, Samsung Electronics
74
SEC- VD- DSW External Control - 0008
65) SB Green Gain( PC, BNC Only)
●
Function
Personal Computer changes Green Gain value of Monitor Signal Balance.
●
Get SB Green Gain Status
Header Command
ID
0xAA
0x7C
Data Length
0
Check
Sum
●
Set SB Green Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x7C
1
SB G Gain
SB G Gain : Phase B value code of Signal Balance to be set on Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
SB G Gain : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
Check
0x7C SB G Gain Sum
r-CMD
0x7C
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
75
SEC- VD- DSW External Control - 0008
66) SB Blue Gain( PC, BNC Only)
●
Function
Personal Computer changes Blue Gain value of Monitor Signal Balance.
●
Get SB Blue Gain Status
Header Command
ID
0xAA
0x7D
Data Length
0
Check
Sum
●
Set SB Blue Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x7D
1
SB B Gain
SB G Gain : Phase B value code of Signal Balance to be set on Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
SB B Gain : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x7B SB B Gain
Check
Sum
r-CMD
0x7C
Check
Sum
Val 1
ERR
Display S/W, VD Business Team, Samsung Electronics
76
SEC- VD- DSW External Control - 0008
67) SB Sharpness ( PC, BNC Only)
●
Function
Personal Computer changes Sharpness value of Monitor Signal Balance.
●
Get SBSharpness Status
Header Command
ID
0xAA
0x7F
Data Length
0
Check
Sum
●
Set SBSharpness
Data Length
Header Command
Data 1
Check
ID
SBSharpness Sum
0xAA
0x7F
1
SBSharpness : Signal Balance Sharpness value code to be set on Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
SBSharpness : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
Check
0x7F SBSharpness Sum
r-CMD
0x7F
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
77
SEC- VD- DSW External Control - 0008
68) Panel On Time
●
Function
Personal Computer shows Panel On Time of TV / Monitor.
●
Get Panel On Time Status
Header Command
ID
0xAA
0x83
Data Length
Ack
Header Command
0xAA
0xFF
Data Length Ack/Nak
●
ID
0
0x05
Check
Sum
'A'
r-CMD Val 1
Val 2
0x83 PTime_ H PTime_L
Check
Sum
●
PTime_H :
PTime_L :
Nak
Panel On Time High.
Panel On Time Low.
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x83
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
78
SEC- VD- DSW External Control - 0008
69) Video Wall On
●
Function
Personal Computer turns Video Wall of TV / Monitor ON/OFF.
Does not operate in MagicNet.
●
Get Video Wall On/Off Status
Header Command
ID
0xAA
0x84
●
●
●
Data Length
0
Check
Sum
Set Video Wall On/Off
Data Length
Header Command
Data 1
ID
0xAA
0x84
1
V.Wall_On
V.Wall_On : Video Wall Code to set on TV / Monitor
1
Video Wall ON
0
Video Wall OFF
Ack
Header Command
ID
0xAA
0xFF
V.Wall_On : Same as above
Data Length
3
Check Sum
Ack/Nak r-CMD
'A'
0x84
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x84
Val 1
V.Wall_On
Val 1
ERR
Check
Sum
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
79
SEC- VD- DSW External Control - 0008
70) Temperature Control
●
Function
Personal Computer sets the maximum value of TV / Monitor temperature.
Only supports models with Temperature notification function.
●
Get Temperature Status
Header Command
0xAA
0x85
ID
Data Length
0
Check
Sum
●
Set Temperature Status
Data Length
Header Command
Data 1
ID
Check Sum
0xAA
0x85
1
Temperature
Temperature : Temperature code to be set on TV/Monitor
Data
45 ~ 125(℃)
●
Ack
Data Length Ack/Nak r-CMD
Header Command
Val 1
ID
0xAA
0xFF
3
'A'
0x85 Temperature
Temperature : Same as above
Check
Sum
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
●
r-CMD
0x85
Val 1
ERR
Display S/W, VD Business Team, Samsung Electronics
80
SEC- VD- DSW External Control - 0008
71)
Brightness Sensor
●
Function
Personal Computer turns Brightness Sensor of TV / Monitor on/off.
Only supports models with Brightness Sensor.
PDP Model is not available it.
●
Get Brightness Sensor ON/OFF Status
Data Length
Header Command
ID
0xAA
0x86
0
Check
Sum
●
Set Brightness Sensor ON/OFF
Data Length
Header Command
Data 1
Check
ID
Sum
0xAA
0x86
1
BR_Sensor
BR_Sensor : Brightness Sensor Code to be set on TV/Monitor
1
Brightness Sensor ON
0
Brightness Sensor OFF
●
Ack
Header Command
0xAA
0xFF
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x86
r-CMD
0x86
Val 1
Check
Sum
BR_Sensor
Val 1
ERR
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
81
SEC- VD- DSW External Control - 0008
72)
Dynamic Contrast
●
Function
Personal Computer turns Dynamic Contrast of TV / Monitor on/off.
Does not operate in PC, DVI and MagicNet.
PDP Model is not available it.
●
Get Dynamic Contrast ON/OFF Status
Data Length
Header Command
ID
0xAA
0x87
0
Check
Sum
●
Set Dynamic Contrast ON/OFF
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x87
1
DY_Cont
DY_Cont : Dynamic Contrast code to be set on TV/Monitor
1
Dynamic Contrast ON
0
Dynamic Contrast OFF
●
Ack
Header Command
0xAA
0xFF
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x87
r-CMD
0x87
Val 1
DY_Cont
Val 1
ERR
Check
Sum
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
82
SEC- VD- DSW External Control - 0008
72) Video Wall User Control
●
Function
Personal Computer turns Video Wall function of TV / Monitor on/off.
Does not operate in MagicNet.
Get Video Wall Status
Data Length Check
Header Command
ID
Sum
0xAA
0x89
0
● Set Video Wall
Data Length Data 1
Header Command
Data 2 Check
ID
0xAA
0x89
2
Wall_Div Wall_SNo Sum
Wall_Div : Video Wall Divider code set on TV/Monitor
●
H
V
1
OFF
2
0x00
0x00
1
0x11
0x12
2
0x21
0x22
3
0x31
0x32
4
0x41
0x42
5
0x51
0x52
Wall_SNo : TV/Monitor Number
Set Number
2
...
...
24
25
0x00
0x13
0x23
0x33
0x43
0x53
code set on
4
0x00
0x14
0x24
0x34
0x44
0x54
TV/Monitor
5
0x00
0x15
0x25
0x35
0x45
0x55
Data
0x01
0x02
1
3
0x18
0x19
Ack
Data Length Ack/Nak r-CMD Val 1
Header Command
Val 2
ID
0xAA
0xFF
4
'A'
0x89 Wall_Div Wall_SNo
● Nak
Data Length Ack/Nak r-CMD
Header Command
Val 1
ID
0xAA
0xFF
3
'N'
0x89
ERR
ERR : Error code that shows what occurred error is
●
Check
Sum
Check
Sum
Display S/W, VD Business Team, Samsung Electronics
83
SEC- VD- DSW External Control - 0008
73) Model Name Control
●
Function
Personal Computer grasps TV / Monitor Model Name and display.
●
Get Model Number Status
Header Command
ID
0xAA
0x8A
●
Data Length Check S
um
0
Ack
Header Command
0xAA
0xFF
Val 3
Val 4
ID
Val 5
Data Length Ack/Nak r-CMD
0x12
x12
'A'
Val 6
Val 7
Val 1
0x8A
Val 2
M_Name1 M_Name2
Val 8
Val 9
Val 10
M_Name3 M_Name4 M_Name5 M_Name6 M_Name7 M_Name8 M_Name9 M_Name10
Val 11
M_Name11
Val 12
M_Name12
Val 13
M_Name13
Val 14
M_Name14
Val 15
M_Name15
Val 16
M_Name16
Check
Sum
M_Name1 ~ M_Name1
M_Name16
: TV / Monitor의 Model Name
M_Name1
'S'
M_Name2
'y'
M_Name3
'n'
M_Name4
'c'
M_Name5
'M'
M_Name6
'a'
M_Name7
's'
M_Name8
't'
M_Name9
'e'
M_Name10
'r'
M_Name11
'4'
M_Name12
'0'
M_Name13
'0'
M_Name14
'D'
M_Name15
'X'
M_Name16
'n'
Display S/W, VD Business Team, Samsung Electronics
84
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement