Sharp BD-HP17U - AQUOS 1080p Blu-ray DiscTM Player Operation Manual

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

SHARP CORPORATION

<VDR1237-A>

Printed in China

Impreso en China

TINS-E176WJQZ

09P03-CH-NG

BD-HP17U

BLU-RAY DISC PLAYER

REPRODUCTOR DE DISCO BLU-RAY

OPERATION MANUAL

MANUAL DE MANEJO

OPERATION MANUAL

BD-HP17U

ENGLISH

• This Player is classified as a CLASS 1 LASER product.

• The CLASS 1 LASER PRODUCT label is located on the rear cover.

• This product contains a low power laser device. To ensure continued safety do not remove any cover or attempt to gain access to the inside of the product.

Refer all servicing to qualified personnel.

1

Introduction

Contents

Introduction

Contents ............................................................................. 2

What would you like to do with this Player? ................... 3

DEAR SHARP CUSTOMER ............................................... 4

IMPORTANT SAFETY INSTRUCTIONS ........................ 4–5

About Discs .................................................................... 6–7

Blu-ray Disc .................................................................. 6

Types of Discs that Can Be Used with This Player ......... 6

Discs that Cannot Be Used with This Player .............. 6–7

About Disc Contents ......................................................... 8

BD Video ...................................................................... 8

Title, Chapter and Track ................................................ 8

Icons Used on DVD Video Disc Cases .......................... 8

The Icons Used in This Operation Manual ..................... 8

Important Information ....................................................... 9

Disc Precautions ........................................................... 9

Copyright ...................................................................... 9

Getting Started ................................................................ 10

Major Components .................................................... 11–12

Main Unit (Front) .......................................................... 11

Main Unit (Rear) .......................................................... 11

HDMI cable holder on the rear of the main unit ...... 11

Remote Control Unit ................................................... 12

Connection

Introduction to Connections .......................................... 13

Video Connections .................................................... 14–16

Connecting to the HDMI Terminal ................................ 14

Selecting the priority video output when connecting

HDMI and Component video .................................... 14

Connecting to the Component Jacks .......................... 15

Connecting to the Video Jack ..................................... 16

Audio Connections .......................................................... 17

Connecting to the Digital Audio Terminal or Audio Jacks ... 17

Broadband Internet Connection .................................... 18

Connecting to the ETHERNET terminal ....................... 18

Enjoying BONUSVIEW or BD-LIVE .............................. 25

Use of Picture in Picture function (secondary audio/ video playback) ................................................... 25

Virtual Package ...................................................... 25

BD-LIVE ................................................................. 25

DVD-R/-RW/BD-RE/-R Playback .......................... 26–27

Playback by selecting a title ................................... 26

Playback by selecting a chapter ............................. 27

Sorting the titles ..................................................... 27

Playback by selecting a Playlist .............................. 27

Playing back the title you stopped while being played... 27

Audio CD Playback ..................................................... 28

Playback from the beginning .................................. 28

Playback by selecting a track ................................. 28

Operation procedure for the “Functions” menu ...... 28

Playback Functions ................................................... 29–31

Fast Forward/Reverse (Search) ................................... 29

Skipping to the Next or the Start of the Current

Chapter (Track) ......................................................... 29

Pause/Frame Advance Playback ................................. 29

Slow Playback ............................................................ 29

Repeat Playback of a Title or Chapter

(Repeat Playback) .................................................... 29

Partial Repeat Playback (Repeat Playback of a Specified Part) ....................................................... 30

Displaying the Audio Information ................................. 30

Switching Subtitles...................................................... 30

Switching the Angle .................................................... 31

Displaying the Angle Mark ........................................... 31

JPEG File Playback ......................................................... 32

Playing back still images in sequence .......................... 32

Playing back still images in a selected folder ............... 32

Playing back Slide Show ............................................. 32

Setting slide show speed/repeat playback .................. 32

Settings During Playback ......................................... 33–34

Function Control ......................................................... 33

Function control operation procedure .................... 33

Functions which can be set ................................... 34

Disc Playback

Before Starting Playback .......................................... 19–22

Loading the Batteries in the Remote Control ............... 19

Approximate operating range of remote control ..... 19

Connecting the Power Cord ........................................ 19

Turning the Power On ................................................. 20

Turning the power on ............................................. 20

Entering standby .................................................... 20

Indicators on the Player ......................................... 20

Language Setting ........................................................ 21

Changing the on-screen display language .............. 21

Operating a SHARP TV Using the Remote Control ...... 21

TV function control ................................................. 21

Turning Off the LCD Backlight and Indications ............. 22

Using AQUOS LINK .................................................... 22

Controlling the Blu-ray disc player using AQUOS

LINK .................................................................... 22

BD/DVD/CD Playback ............................................... 23–28

Loading a Disc ............................................................ 23

BD/DVD Video Playback ............................................. 23

Displaying the disc information ............................... 23

BD/DVD Menus .......................................................... 24

Start playback by selecting a title from the top menu ... 24

Using the disc menu .............................................. 24

Using the pop-up menu ......................................... 24

Settings

SETTINGS ................................................................... 35–44

Common operations ................................................... 35

Basic Operation for Playback Setting .......................... 35

Audio Video Settings ............................................. 36–37

Quick Start .................................................................. 37

Auto Power Off ........................................................... 37

AQUOS LINK .............................................................. 37

Playback Setting ......................................................... 38

Front Display/LED ....................................................... 38

Version ........................................................................ 38

System Reset ............................................................. 38

Communication Setup .......................................... 39–41

The operation procedure for inputting characters manually .............................................................. 41

USB Memory Management ......................................... 42

Software Update ......................................................... 43

Appendix

Troubleshooting ......................................................... 45–47

To Reset this Player..................................................... 47

On-screen Error Messages ............................................ 47

Glossary ..................................................................... 48–49

Specifications .................................................................. 50

CONSUMER LIMITED WARRANTY .......................... 51–52

* The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations.

2

What would you like to do with this Player?

Watching high quality movies on Bluray discs

This Player offers full high-definition Blu-ray disc playback.

BD/DVD/CD Playback (p. 23)

What to do first:

Refer to “Getting Started” (p. 10) to prepare for watching your discs.

Enjoying different kinds of discs and contents

Use this Player to enjoy various types of optical discs such as DVDs and CDs that contain various multimedia content.

About Discs (pp. 6–7)

BD/DVD/CD Playback (p. 23)

Introduction (pp. 1–12)

Explains the important operation information.

Connection (pp. 13–18)

Shows the connecting options provided by this Player.

Simple connection and operation through HDMI

This Player is equipped with an HDMI terminal. You can connect it to the TV using HDMI and no other cable will be needed to enjoy movies. If your TV is compatible with AQUOS LINK, you can control both the TV and this Player with simple operations.

Introduction to Connections (p. 13)

Video Connections (p. 14)

Disc Playback (pp. 19–34)

Shows simple playback and useful functions.

Settings (pp. 35–44)

Gives you more options to suit your circumstances.

Enjoying BD-LIVE functions through the internet

This Player is compatible with BD-LIVE. You can enjoy bonus content such as movie trailers through the internet when playing back BD-Video discs compatible with BD-LIVE.

Enjoying BONUSVIEW or BD-LIVE

(p. 25)

Appendix (pp. 45–52)

Provides troubleshooting tips and more information.

3

DEAR SHARP CUSTOMER

Thank you for your purchase of the SHARP Blu-ray Disc Player. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your

Blu-ray Disc Player, please read the following precautions carefully before using the product.

1)

2)

3)

4)

5)

6)

7)

8)

9)

10)

11)

12)

13)

14)

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Information

15) Power Sources—This product should be operated only from the type of power source indicated on the marking label.

If you are not sure of the type of power supply to your home, consult your product dealer or local power company.

16)

17)

18)

19)

20)

21)

22)

For products intended to operate from battery power, or other sources, refer to the operating instructions.

Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) b) c)

When the AC cord or plug is damaged,

If liquid has been spilled, or objects have fallen into the product,

If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,

If the product has been dropped or damaged in any way, and e) f) When the product exhibits a distinct change in performance - this indicates a need for service.

Replacement Parts—When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.

The main AC plug is used as disconnect device and shall always remain readily operable.

4

IMPORTANT SAFETY INSTRUCTIONS

•

•

•

•

•

•

•

•

•

•

•

•

Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the manufacturer.

Selecting the location — Select a place with no direct sunlight and good ventilation.

Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's instructions are followed.

Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Lightning — For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and powerline surges.

To prevent fire, never place any type of candle or flames on the top or near the product.

To prevent fire or shock hazard, do not expose this product to dripping or splashing.

No objects filled with liquids, such as vases, should be placed on the product.

To prevent fire or shock hazard, do not place the AC cord under the product or other heavy items.

Turn off the main power and unplug the AC cord from the wall outlet before handling.

To clean the outer cabinet, periodically wipe it with a soft cloth.

Do not use chemicals for cleaning. It may damage the cabinet finish.

5

About Discs

Blu-ray Disc

Blu-ray Disc is the ultimate next generation optical media format, offering the following key features:

•

•

•

•

•

•

Largest capacity (25 GB single layer – 50 GB dual layer)

– with over 5 times the amount of content possible with current DVDs, particularly well suited for high definition feature films with extended levels of interactive features

Pristine picture quality with the capability for full high definition 1920 x 1080p resolution

Best audio possible with uncompressed surround sound

(higher quality than even theatre audio)

Broadest industry support – ensuring more choice for consumers in the marketplace

Hardware products will be backward compatible with

DVDs, allowing continued enjoyment of existing DVD libraries.

Disc Durability – new breakthroughs in hard coating technologies gives Blu-ray Discs the strongest resistance to scratches and finger prints.

Types of Discs that Can Be Used with This Player

•

•

The following discs can be played back in this Player. Do not use an 8 cm (3”) to 12 cm (5”) adapter.

Use discs that conform to compatible standards as indicated by the presence of official logos on the disc label.

Playback of discs not complying with these standards is not guaranteed. In addition, the image quality or sound quality is not guaranteed even if the discs can be played back.

Disc Type

BD Video Region code

A/ALL

Recording

Format

—

Contents

Audio

+ Video

(Movie)

Disc Size

12 cm (5”)

BD-RE DL

BD-R DL

DVD Video Region code

1/ALL

1 ALL

DVD+RW/DVD+R

DVD-R DL

DVD-RW/DVD-R

Audio CD* 1

CD-RW/CD-R

BDMV/

BDAV format

Video format

Audio

+ Video

(Movie)

12 cm (5”)

8 cm (3”)

Video/VR format

(finalized disc only)

Audio CD

(CD-DA)

Audio CD

(CD-DA)

JPEG* 2

Audio

+ Video

(Movie)

Audio

Audio

Still image

(JPEG file)

12 cm (5”)

8 cm (3”)

12 cm (5”)

8 cm (3”)

* 1 This Player has been designed on the premise of playing back Audio CDs that comply with CD (Compact Disc) standards. CDs containing a signal for the purpose of protecting copyrights (copy control signal) may not be able to be played back with this Player.

•

•

•

•

BD/DVD video players and discs have region codes, which dictate the regions in which a disc can be played. This

Player's region code is A for BD and 1 for DVD. (Discs marked ALL will play in any player.)

BD/DVD Video operations and functions may be different from the explanations in this manual and some operations may be prohibited due to disc manufacturer's settings.

If a menu screen or operating instructions are displayed during playback of a disc, follow the operating procedure displayed.

The audio component of a DVD video recorded at 96 kHz (Linear PCM) will be output as 48 kHz audio during playback.

•

•

NOTE

Playback for some of the discs in the left side column tables may not be possible depending on the disc.

“Finalize” refers to a recorder processing a recorded disc so that it will play in other DVD players/recorders as well as this player. Only finalized DVD discs will play back in this player. (This player does not have a function to finalize discs.)

Discs that Cannot Be Used with

This Player

The following discs cannot be played back or will not play back properly on this Player. If such a disc is mistakenly played back, speaker damage may occur. Never attempt to play back these discs.

CDG, Video CD, Photo CD, CD-ROM, CD-TEXT, SVCD,

SACD, PD, CDV, CVD, DVD-RAM, DVD-Audio, BD-RE with the cartridge, CD-MP3, CD-WMA

Discs with unusual shapes cannot be played.

• Discs with unusual shapes (heart-shaped or hexagonal discs, etc.) cannot be used. The use of such discs will cause malfunction.

•

•

*

The following BD video discs cannot be played.

• Discs not displaying “A” or “ALL” for the region code (discs sold outside the authorized marketing area).*

Discs produced illegally.

Discs recorded for commercial use.

The region code for this product is A.

•

•

*

The following DVD video discs cannot be played.

• Discs not displaying “1” or “ALL” for the region code (discs sold outside the authorized marketing area).*

Discs produced illegally.

Discs recorded for commercial use.

The region code for this product is 1.

The following BD-RE/R, DVD-RW/R and

DVD+RW/R discs cannot be played.

• Discs on which data has not been recorded cannot be played back.

The following Audio CD discs cannot be played.

• Discs containing a signal for the purpose of protecting copyrights (copy control signal) may not be played back

• with this Player.

This Player has been designed on the premise of playing back Audio CDs that comply with CD (Compact Disc) standards.

6

About Discs

The following CD-RW/R discs cannot be played.

• Discs on which data has not been recorded cannot be played back.

•

•

•

Discs recorded in a format other than an Audio CD and

JPEG file format* 2 cannot be played back.

Discs may not be played back depending on their recording status or the status of the disc itself.

Discs may not be played back depending on their compatibility with this Player.

Structure of still images (JPEG) folders

You can play still images (JPEG) with this unit by making folder on disc as shown below.

Root

*2

About the JPEG file format

JPEG is a type of file format for storing still-image files

(photos, illustrations, etc.). The Player lets you play JPEG format still-image files.

•

•

File formats that are not compatible.

•

•

Still images in formats other than JPEG (such as TIFF) cannot be played.

There may be some files that cannot be played even if they are in JPEG format.

Progressive JPEG files cannot be played.

Moving image files and audio files as well as Motion JPEG format files cannot be played, even though they are JPEG files.

Other files that cannot be played back.

• You may not be able to play some still images which you have created, touched up, copied or otherwise edited on your computer.

You may experience one or more of the following symptoms when playing files.

•

•

It may take some time to play files depending on the number of folders, number of files and volume of data involved.

EXIF information will not be displayed. EXIF stands for

Exchangeable Image File Format, and is a standard for storing interchange information in image files, especially those using JPEG compression. (Refer to http://exif.org for more information.)

•

•

When using the unit to play a CD-RW/R disc with still images stored (recorded).

• With CD-RW/R discs on which still images are mixed in

• with music or movies, you will be able to play only the still images. You may not be able to play some of these discs at all.

Multi-session discs cannot be played.

You may not be able to play some still images you have processed (rotated or saved by overwriting other images) using image processing software or some still images you have imported from the Internet or e-mail.

The discs which this Player can play back (recognize) are limited to the following properties:

Contains EXIF format files

Picture resolution: Between 32 g32 and 7680g4320 pixels

Maximum number of folders: 256

Maximum number of files in each folder: 256

File size: 20MB or less

01 Folder

001.jpg

256.jpg

02 Folder

001.jpg

256.jpg

256 Folder

001.jpg

256.jpg

7

About Disc Contents

BD Video

Enjoy BD-specific functions including BONUSVIEW (BD-ROM

Profile 1 Version 1.1), such as picture-in-picture, and BD-LIVE

(page 25).

For the BD video discs compatible with BONUSVIEW/BD-

LIVE, you can enjoy additional contents by copying the data from the discs or downloading it via the internet. For instance, this function is capable of playing the original movie as the primary video while playing video commentary from the film director on a small screen as a secondary video.

•

NOTE

The available functions differ depending on the disc.

Title, Chapter and Track

•

•

Blu-ray discs and DVDs are divided into “Titles” and

“Chapters”. If the disc has more than one movie on it, each movie would be a separate “Title”. “Chapters”, on the other hand, are subdivisions of titles. (See Example 1.)

Audio CDs are divided into “Tracks”. You can think of a

“Track” as one tune on an Audio CD. (See Example 2.)

Example 1: Blu-ray disc or DVD

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 3 Chapter 1

Example 2: Audio CD

DTS

DTS is a digital sound system developed by DTS, Inc. for use in cinemas.

Linear PCM

Linear PCM is a signal recording format used for Audio

CDs and on some DVD and Blu-ray discs. The sound on Audio CDs is recorded at 44.1 kHz with 16 bits.

(Sound is recorded between 48 kHz with 16 bits and 96 kHz with 24 bits on DVD video discs and between 48 kHz with 16 bits and 192 kHz with 24 bits on BD video discs.)

2 Subtitle languages

This indicates the kind of subtitles.

3 Screen aspect ratio

Movies are shot in a variety of screen modes.

4 Camera angle

Recorded onto some BD/DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.).

5 Region code

This indicates the region code (playable region code).

The Icons Used in This Operation

Manual

BD VIDEO

BD-RE

BD-R

........... Indicates the functions that can be performed for BD Video discs.

........... Indicates the functions that can be performed for BD-RE discs.

........... Indicates the functions that can be

DVD VIDEO performed for BD-R discs.

....... Indicates the functions that can be performed for DVD Video discs.

DVD-RW

DVD-R

......... Indicates the functions that can be performed for DVD-RW discs.

.......... Indicates the functions that can be

AUDIO CD performed for DVD-R discs.

........... Indicates the functions that can be

CD-R

JPEG performed for Audio CDs.

........ Indicates the functions that can be performed for CD-R discs in JPEG format.

CD-RW

JPEG

......... Indicates the functions that can be performed for CD-RW discs in JPEG format.

Track 1 Track 2 Track 3 Track 4

Icons Used on DVD Video Disc Cases

The back of the case of a DVD that is commercially available usually contains various information about the contents of the disc.

1 2

2

1. English

2. Chinese

2

1. English

2. Chinese

3 4 5

16:9 LB

2

1 2 3

4 5 6

1 Audio tracks and audio formats

DVD discs can contain up to 8 separate tracks with a different language on each. The first in the list is the original track.

This section also details the audio format of each soundtrack — Dolby Digital, DTS, MPEG etc.

Dolby Digital

A sound system developed by Dolby Laboratories Inc. that gives movie theater ambience to audio output when the Player is connected to a Dolby Digital processor or amplifier.

8

Important Information

Disc Precautions

Be Careful of Scratches and Dust

• BD, DVD and CD discs are sensitive to dust, fingerprints and especially scratches. A scratched disc may not be able to be played back. Handle discs with care and store them in a safe place.

Proper Disc Storage

Place the disc in the center of the disc case and store the case and disc upright.

Avoid storing discs in locations subject to direct sunlight, close to heating appliances or in locations of high humidity.

Do not drop discs or subject them to strong vibrations or impacts.

Avoid storing discs in locations where there are large amounts of dust or moisture.

Handling Precautions

• If the surface is soiled, wipe gently with a soft, damp (water only) cloth. When wiping discs, always move the cloth from the center hole toward the outer edge.

•

•

•

•

Do not use record cleaning sprays, benzene, thinner, static electricity prevention liquids or any other solvent.

Do not touch the surface.

Do not stick paper or adhesive labels to the disc.

If the playing surface of a disc is soiled or scratched, the

Player may decide that the disc is incompatible and eject the disc tray, or it may fail to play the disc correctly. Wipe any dirt off the playing surface with a soft cloth.

Cleaning the Pick Up Lens

• Never use commercially available cleaning discs. The use of these discs can damage the lens.

• Request the nearest service center approved by SHARP to clean the lens.

Warnings about dew formation

• Condensation may form on pick up lens or disc in the following conditions:

− Immediately after a heater has been turned on.

− In a steamy or very humid room.

− When the Player is suddenly moved from a cold environment to a warm one.

When condensation forms:

• It becomes difficult for the Player to read the signals on the disc and prevents the Player from operating properly.

To remove condensation:

• Take out the disc and leave the Player with the power off until the condensation disappears. Using the Player when there is condensation may cause malfunction.

Copyright

•

•

Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. Refer to relevant laws in your country.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698;

6,516,132; and 5,583,936

•

•

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby

Laboratories.

Manufactured under license under U.S. Patent #’s:

5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;

6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-

HD and DTS-HD Master Audio | Essential are trademarks of DTS, Inc. ©1996-2008 DTS, Inc. All Rights Reserved.

•

• is a trademark.

“BD-LIVE” logo is a trademark of Blu-ray Disc Association.

• is a trademark of DVD Format/Logo Licensing

Corporation.

•

•

•

HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

“x.v.Color” and “x.v.Color” logo are trademarks.

Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems,

Inc. in the United States and/or other countries.

ENERGY STAR ® Program Information

Products that have earned the ENERGY STAR ® are designed to protect the environment through superior energy efficiency.

To comply with the ENERGY STAR ® standards mentioned above, please set the Quick Start function to “No” as described on page 37.

ENERGY STAR ® is a U.S. registered mark.

9

Getting Started

Step 1: Unpacking

Make sure the following accessories are provided with the product.

Remote control unit

“AA” size battery ( g2) AC cord

AV cable HDMI cable

Step 2: Selecting equipment to connect

Connection varies with the equipment used. Refer to Connection. (Pages 13–18)

Turn off the devices before connecting.

Step 3: Playing back discs

Play back a Blu-ray disc after connecting the Player to your favorite equipment.

Refer to Disc Playback. (Pages 19–34)

Step 4: Adjust settings

Adjust settings to enjoy various features and other functions for playing discs.

Refer to Settings. (Pages 35–44)

10

Major Components

Main Unit (Front)

1 2

3

4 5 6 7 8

3

4

1

2

OPEN/CLOSE (p. 23)

Flap door

Disc tray (p. 23)

ON/STANDBY indicator (p. 20)

Main Unit (Rear)

9 10 11

7

8

5

6

POWER (p. 20) d PLAY (p. 23)

H STOP (p. 23)

F PAUSE (p. 29)

12

9

10

11

12

AQUOS PURE MODE indicator

(pp. 20, 22)

Remote control sensor (p. 19)

Front panel display (p. 20)

BD/DVD/CD mode indicator (p. 20)

1

2

3

4

8 9 10

5 6 7

HDMI cable holder on the rear of the main unit

This Player comes with a dedicated cable holder so that the HDMI cable does not place direct weight and stress on the terminal. When connecting the HDMI cable, be sure to pass the cable through the cable holder and secure it.

•

CAUTION

Do not pull on the HDMI cable when it is connected to the terminal, as this can damage the terminal or cause a poor connection.

1

2

3

Press down on the tab and pull it towards you.

Pass the HDMI cable (supplied) through the cable holder.

Press in on the tab until it clicks into position.

5

6

2

3

4

7

8

9

1

10

COMPONENT VIDEO OUT jacks

(p. 15)

VIDEO output jack (p. 16)

2CH AUDIO output jacks (p. 17)

DIGITAL AUDIO OUT OPTICAL terminal (p. 17)

ETHERNET terminal (p. 18)

BD STORAGE/SERVICE terminal

BD STORAGE (pp. 25, 42)

SERVICE for software (p. 43)

HDMI OUT terminal (p. 14)

HDMI cable holder (See below.)

Cooling fan

The cooling fan operates while the power to the Player is on.

AC IN terminal (p. 19)

Connect the HDMI cable to the rear of the main unit while providing some slack.

HDMI cable

11

Major Components

Remote Control Unit

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

18

19

20

21

22

16

17

23

24

25

18

19

20

21

22

14

15

16

17

23

24

25

8

9

10

11

12

13

6

7

4

5

1

2

3

POWER (p. 20) m OPEN/CLOSE (p. 23)

AUDIO (p. 30), SUBTITLE (p. 30)

Number buttons (p. 34)

REPEAT (pp. 29, 30)

T SKIP/ k (pp. 26, 29)

U SKIP/ l (pp. 26, 29)

F PAUSE (p. 29) d PLAY (p. 23)

TOP MENU/TITLE LIST (pp. 24, 26)

Cursor buttons ( a/b/c/d), ENTER (pp. 21, 35)

EXIT (pp. 20, 35)

A (Red), B (Green), C (Blue), D (Yellow) (pp. 26–28, 32,

41)

(Lock) (See below.)

COMPONENT RESET (p. 36)

DISPLAY (pp. 23, 30)

TV control buttons (p. 21)

FUNCTION (pp. 31, 33)

V FWD (p. 29)

S REV (p. 29)

H STOP (p. 23)

POP-UP MENU (p. 24) n RETURN (p. 29)

HDMI (p. 36)

SETUP (pp. 21, 35)

Keylock function

You can set the keylock to prevent accidental operations.

This function allows TVs compatible with AQUOS LINK to also perform a Key Lock on the player.

Press and hold (Lock) for more than 5 seconds.

• Each time you perform this operation, the function is activated or deactivated.

• If you try to operate the Player while the keylock function is set, “Hold” blinks on the front display panel to indicate that the keylock function is set.

12

Connection

Introduction to Connections

This Player is equipped with the terminals/jacks listed below. Find the corresponding terminal/jack on your video equipment. Using the supplied cable or commercially available cables, connect the video first. Then connect the audio.

Video terminals/jacks on this Player

Higher Quality 1 HDMI OUT terminal

Page 14

2 COMPONENT VIDEO OUT jacks

Page 15

3 VIDEO output jack

Standard Quality

Audio terminals/jacks on this Player

Digital audio connection

Higher Quality 1 HDMI OUT terminal

Page 16

Page 14

2 DIGITAL AUDIO OUT

OPTICAL terminal

Page 17

Standard Quality

Analog audio connection

Standard Quality 2CH AUDIO output jacks

Page 17

Broadband Internet connection

ETHERNET terminal

Page 18

13

Video Connections

Connecting to the HDMI Terminal

•

•

•

You can enjoy high quality digital picture and sound through the HDMI terminal.

See page 44 for information on the output of next generation audio formats.

When you use AQUOS LINK, make sure to use a certified HDMI cable.

1

2

STEPS

Be sure to turn off this Player and the equipment before making any connections.

Firmly connect an HDMI cable (supplied) to the HDMI terminals ( 1 and 2).

This Player

•

NOTE

Audio transmitted in DTS-HD High

Resolution Audio and DTS-HD Master

Audio formats is output from the

HDMI terminal as Bitstream. Connect an amplifier with a built-in decoder to enjoy the fine sound quality.

• When using an HDMI output, 7.1 ch

Digital Output is available.

1

2

To HDMI OUT terminal

HDMI cable

(supplied)

To HDMI IN terminal

Selecting the priority video output when connecting HDMI and Component video

When you connect both an HDMI cable and a component cable to this player, you need to select the priority video output in “Settings” – “Audio Video

Settings” – “Video Out Select”. (See page 36.)

•

•

*

NOTE

When you connect the player to a SHARP TV with an

HDMI cable only and the TV is turned on, the video output switches to HDMI automatically. (The above setting is unnecessary.)

When you connect the player to a TV with an HDMI cable,

“HDMI Video Out” is set to “Auto”. If you don’t get a stable image, select the desired resolution*.

When you set “HDMI Video Out” to a setting other than

“Auto”, you can only select resolutions* that are compatible with the connected TV.

Refer to “HDMI Video Out” on page 36 regarding the resolutions of the HDMI video output.

Projector

TV

AV receiver

Equipment with an HDMI terminal

After connecting

•

•

•

•

Secure the HDMI cable to the HDMI cable holder, passing it through the holder. (Page 11)

If desired, connect audio equipment. (Page 17)

Load a disc and start playback. (Pages 23–28)

Refer to AQUOS LINK function. (Pages 22 and 37)

14


Connecting to the Component Jacks

You can enjoy accurate color reproduction and high quality images through the component jacks.

STEPS

1

2


Firmly connect a component video cable (commercially available) to the component jacks ( 1 and 2).

This Player

Red

Blue

Green

(Red)

(Blue)

(Green)

1 To COMPONENT

VIDEO OUT jacks

Component video cable

(commercially available)

Red

Blue

COMPO-

NENT IN

P R

( C R)

(

P B

C

B)

Green Y

2 To COMPONENT

IN jacks

(Red)

(Blue)

(Green)

Projector AV receiver

TV

Video equipment with component jacks

•

•

•

CAUTION

You need to select the priority video output in

“Settings” – “Audio Video Settings” – “Video Out

Select”. (See page 36.)

When the priority video output is set to “HDMI” in

“Video Out Select”, the video resolution which is output from the COMPONENT VIDEO OUT jacks is the one set in “HDMI Video Out”.

When the output from the COMPONENT VIDEO OUT jacks is prioritized, set the priority video output to

“Component”.

VCR

Connect directly

Blu-ray Disc

Player

LCD TV

•

•

NOTE

Connect the Blu-ray disc player to LCD TV directly.

If you play back the image via VCR, the image may deteriorate due to the copy guard function.

When you record the program where copyright is protected, the copy guard function is activated automatically; the program can not be recorded correctly. Also, the playback image via VCR may deteriorate due to this function. However, this is not a malfunction. When you watch the program where copyright is protected, we recommend that the Blu-ray disc player be connected to LCD TV directly.


• Connect audio equipment or the audio terminals of the TV. (Page 17)

15


Connecting to the Video Jack

You can enjoy the images through the video jack.

STEPS

1

2


Firmly connect an AV cable (supplied) to the video jacks ( 1 and 2).

This Player

(Yellow)

Yellow

1

To VIDEO output jack

AV cable (supplied)

2 To VIDEO input jack

(Yellow)

Yellow

Projector

AV receiver

TV

Video equipment with a video jack


• Connect audio equipment or the audio terminals of the TV. (Page 17)

16

VCR

Blu-ray Disc

Player

Connect directly

LCD TV

•

•

NOTE

Connect the Blu-ray disc player to LCD TV directly. If you play back the image via VCR, the image may deteriorate due to the copy guard function.

When you record the program where copyright is protected, the copy guard function is activated automatically; the program can not be recorded correctly.

Also, the playback image via VCR may deteriorate due to this function. However, this is not a malfunction. When you watch the program where copyright is protected, we recommend that the Blu-ray disc player be connected to LCD TV directly.

Audio Connections

Connecting to the Digital Audio Terminal or Audio Jacks

•

•

You can connect audio equipment or the TV to the DIGITAL AUDIO OUT terminal or 2CH AUDIO output jacks.

See page 44 for information on the output of next generation audio formats.

STEPS

1

2


Firmly connect an optical digital cable (commercially available) or AV cable (supplied) to the optical digital audio terminals or audio jacks ( 1 and 2, or 3 and 4).

This Player

(Red)

(White)

3 To 2CH AUDIO output jacks

AV cable (supplied)

4 To AUDIO input jacks

Red

White

(White) (Red)

White Red

• When using OPTICAL output,

5.1 ch Digital Output is available.

7.1 ch Digital Output is not available.

NOTE:

7.1 ch Audio is available via the HDMI terminal.

To OPTICAL output terminal

1

Optical digital cable


To OPTICAL input terminal

2

TV Amplifier

Audio equipment with a digital audio input terminal or audio jacks


• Load a disc and start playback. (Pages 23–28)

17

Broadband Internet Connection

Connecting to the ETHERNET terminal

•

•

You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-

LIVE compatible discs. Refer to pages 25 and 38 regarding further information on BD-LIVE functions.

When using the internet, a broadband internet connection as shown below is required.

STEPS

1

2


Firmly connect a LAN cable (commercially available) to the ETHERNET terminal ( 1 and 2).

This Player

To ETHERNET terminal

1

•

•

CAUTION

When using a broadband internet connection, a contract with an internet service provider is required. For more details, contact your nearest internet service provider.

Refer to the operation manual of the equipment you have as the connected equipment and connection method may differ depending on your internet environment.

•

NOTE

Use a LAN cable/router supporting 10BASE-T/100BASE-

TX.

LAN cable


To LAN terminal

2

LAN

Internet Modem Hub or broadband router

Example of a Broadband Internet Connection

PC


•

•

Perform the communication setting. (Pages 39–41)

Load a BD-LIVE compatible disc and play back the contents. (Pages 23 and 25)

18

Disc Playback

Before Starting Playback

1

Loading the Batteries in the

Remote Control

Hold in the tab on the battery cover and pull the cover towards the direction of the arrow.

Approximate operating range of remote control

Remote control sensor

2

Load the two “AA” size batteries (R-06 size,

UM/SUM-3). Place batteries with their terminals corresponding to the m and n indications in battery compartment.

30º 30º

7 m

Remote control unit

3 Insert the smaller tab of the battery cover into the opening 1, and press down on the cover until it clicks in place

2.

Connecting the Power Cord

Plug the supplied AC cord into the AC IN terminal on the rear of the Player. Then plug into AC outlet.

•

•

•

•

•

NOTE

Do not subject the remote control unit to shock, water or excessive humidity.

The remote control unit may not function if the Player's remote sensor is in direct sunlight or any other strong light.

Incorrect use of batteries may cause them to leak or burst.

Read the battery warnings and use the batteries properly.

Do not mix old and new batteries, or mix different brands.

Remove the batteries if you will not use the remote control unit for an extended period of time.

To AC IN terminal

To AC outlet

•

•

•

•

NOTE

Place the Player close to the AC outlet, and keep the power plug within reach.

TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT

TOUCH THE UN-INSULATED PARTS OF ANY CABLES

WHILE THE AC CORD IS CONNECTED.

The ON/STANDBY indicator blinks while the Player is preparing for starting up. You cannot turn the Player on until the ON/STANDBY indicator stops blinking.

If you are not going to use this Player for a long period of time, be sure to remove the AC cord from the AC outlet.

19


Turning the Power On

POWER

ON/STANDBY indicator


BD/DVD/CD mode indicator

Turning the power on

Press POWER on the remote control or on the Player to turn on the power of the Player.

Entering standby

Press POWER on the remote control or on the Player to enter standby.

• If you press POWER again immediately after entering standby, the Player may not turn on. If this happens, wait for 10 seconds or more and then turn on the power again.

•

NOTE

When the ON/STANDBY indicator is blinking (may take some time), the Player cannot be turned on.

20

Indicators on the Player

ON/STANDBY indicator

Green on

Red blinks

Red on

Power on

Preparing for standby

Standby

AQUOS PURE MODE indicator

Green on Output in AQUOS PURE

MODE (See page 22.)

BD/DVD/CD mode indicator

Off No disc

Blue on

White on

White blinks

Playing back

Disc stopped

Loading a disc

• When you turn on the power, the Menu screen automatically displays for a while.

Press EXIT to erase the display.


Language Setting

1

Changing the on-screen display language

Press SETUP to display the Setup Menu screen.

2

Press a/b/c/d to select “On Screen

Language”, then press ENTER.

Displays The Title List Settings

3

On Screen Language Picture

Press a/b to select the language you want to display on the screen, then press ENTER.

English

Español

Français

•

NOTE

To select the DVD disc language, such as subtitle language, etc., see page 24.

Operating a SHARP TV Using the

Remote Control

The Universal Remote Control may operate the basic functions of the SHARP TV.

TV function control

•

•

•

•

TV Power: POWER

TV-AV Selector: INPUT

TV Volume up/down: VOL e/f

TV Channel up/down: CH r/s

21


Turning Off the LCD Backlight and

Indications

If you feel that the indicators on the Player are too bright when watching movies, you can turn them off except for the ON/STANDBY indicator.

1

2

3

4

5


Press a/b/c/d to select “Settings”, then press ENTER.

Press a/b to select “Front Display/LED”, then press ENTER.

Audio Video Settings

Quick Start

Auto Power Off

AQUOS LINK

Playback Setting

Communication Setup

Front Display/LED

Version

USB Memory Management

Software Update

System Reset

Press c/d to select “On” or “Off”, then press

ENTER.

Press SETUP or EXIT to exit.

Using AQUOS LINK

Controlling the Blu-ray disc player using AQUOS LINK

What is AQUOS LINK?

Using the HDMI CEC (Consumer Electronics Control), with

AQUOS LINK you can interactively operate this player with your SHARP AQUOS TV.

What you can do with AQUOS LINK

When you connect this player to the LCD TV compatible with AQUOS LINK using an HDMI cable, you can perform the function listed below. (See page 14 for connecting to the

HDMI terminal).

Automatic input select function

When you start playback of this player, the input selector of the LCD TV will automatically switch to the LCD TV input terminal connected to the player and the playback image will appear on the screen, even if you are watching a TV program.

Automatic power off function

If you turn off the LCD TV when this player is in stop mode, the power of this player will be turned off automatically. (In the case, while playing back a disc, the power does not turn off.)

Automatic power on function

When you switch to the LCD TV input terminal connected to this player, the power of this player will be turned on automatically.

AQUOS PURE MODE

When you connect this player to an AQUOS LCD TV compatible with AQUOS LINK and set “AQUOS LINK” to

“Yes” (page 37), images automatically adjusted to the most suitable image quality for the AQUOS TV are output from the

HDMI OUT terminal of this player.

The AQUOS PURE MODE indicator on the player lights in green.


•

NOTE

In order to make AQUOS LINK available, set up AQUOS

LINK on the LCD TV that is connected to this player. See page 37 regarding the setup of this player.

Refer to the Operation Manual of the TV for details regarding setup.

22

BD/DVD/CD Playback

This section explains playback of commercially available BD Video and DVD Video discs (like movies),

CDs, and recorded DVD-RW/R discs.

Loading a Disc

To stop playback

Press H STOP.

Resume playback function

• If you press d PLAY next, playback will resume from the point where the Player was previously stopped. To playback from the beginning, cancel resume mode by pressing H STOP, then press d PLAY. (This may not work depending on the type of disc. In this case, open the disc tray or enter standby.)

•

NOTE

Resume playback may not function depending on the disc.

POWER OPEN/CLOSE

Displaying the disc information

1

2

3

Press POWER to turn on the power.

Press OPEN/CLOSE to open the disc tray.

Load a disc on the disc tray.

• Insert the disc with the label face up.

• In case of disc recorded on both sides, face down the side to play back.

Press DISPLAY during playback.

• Each time you press DISPLAY, the display switches as follows.

1

2

3

4

Disc Information Screen A

BD-VIDEO

1 / 1

1 0

00 : 00 : 12

/ 03 : 12 : 28

4

Press OPEN/CLOSE to close the disc tray.

BD/DVD Video Playback

BD VIDEO

DVD VIDEO

BD-RE

DVD-R

BD-R

DVD-RW

This player supports DVD upscaling during DVD playback.

4

Disc Information Screen B

00 : 00 : 12

/ 03 : 12 : 28

1

2

•

•

Load a disc.

• Playback may begin automatically, depending on the disc.

Playback begins from the first title.

The menu may be displayed first, depending on the disc. Perform playback operation by following the directions on the screen.

Press d PLAY if playback does not begin automatically or playback is stopped.

•

NOTE

The disc load time may vary depending on the disc.

No Display

1

2

3

4

Type of disc

Title number being played / Total number of Titles

Chapter number being played / Total number of

Chapters

Elapsed playback time / Total playback time for the

Title

•

•

NOTE

Disc Information Screen A disappears after about 1 minute elapses without performing any operations.

For some commercially-released BD VIDEO discs, the total playback time display for the Chapter/Title may not appear.

23


BD/DVD Menus

•

•

This section explains how to play back a BD/DVD video disc with a top menu, disc menu or pop-up menu.

The titles listed in the top menu and a disc guide (for options like subtitles and audio languages) are given in the disc menu.

Using the disc menu

DVD VIDEO

Example: Select “SUBTITLE LANGUAGE”.

1

Press TOP MENU/TITLE LIST.

• The disc menu screen is displayed if present on the

DVD video disc.

2

Press a/b to select “SUBTITLE LANGUAGE”, then press ENTER.

• The screen for selecting the subtitle language is displayed.

MENU

1 AUDIO LANGUAGE

2 SUBTITLE LANGUAGE

3 AUDIO

Start playback by selecting a title from the top menu

BD VIDEO DVD VIDEO

1

Press TOP MENU/TITLE LIST.

• The top menu screen is displayed if present on the

BD/DVD video disc.

1

T O P M E N U

Jazz 2 Latin

3 Classic 4 Rock

2

Press a/b/c/d to select the title, then press

ENTER.

• The selected title is played back.

•

NOTE

The procedure explained on this page is the basic operation procedure. Procedures vary depending on the BD/DVD video disc, so you may need to follow the instructions in the BD/DVD video disc manual or the instructions displayed on the screen.

Top menu

• With some BD/DVD discs, the top menu may be referred to as the “Title Menu”. Use TOP MENU/TITLE LIST on

• the remote control when the instructions refer to “Title

Menu”.

If no top menu is available, the TOP MENU/TITLE LIST button will have no effect.

3

4

1

Press POP-UP MENU during playback.

•

•

The pop up menu screen is displayed.

The menu contents displayed vary depending on the disc. For details on how to see and operate the popup menu, refer to the manual for the disc.

2

3

Press a/b to select the subtitle language, then press ENTER.

Press TOP MENU/TITLE LIST to exit.

Using the pop-up menu

BD VIDEO

Pop-up menu

Previous page

Next page

Press a/b/c/d to select the desired item, then press ENTER.

Press POP-UP MENU to exit.

• The pop-up menu will automatically disappear for some discs.

24


Enjoying BONUSVIEW or BD-LIVE

BD VIDEO

This Player is compatible with additional functions of

BD-Video, BONUSVIEW (BD-ROM Profile 1 Version

1.1) and BD-LIVE.

For BD-Video discs compatible with BONUSVIEW, the functions of Picture in Picture and Virtual Package are available. For BD-LIVE compatible discs, you can enjoy a variety of functions via the internet in addition to the

BONUSVIEW functions.

Virtual Package/BD-LIVE data is saved in Local

Storage (USB memory device connected to this

Player). To enjoy these functions, connect a USB memory device (2GB or greater) supporting USB

2.0 High Speed (480Mbit/s) to the BD STORAGE/

SERVICE terminal (page 11) on the back of this player.

•

•

•

•

•

If there is insufficient storage space, the data will not be copied/downloaded. Delete unneeded data or use a new

USB memory device.

If a USB memory device containing other data (previously recorded) is used, the video and audio may not play back properly.

If the USB memory device is disconnected from this player during playback of Virtual Package/BD-LIVE data, playback of the disc will stop.

Some time may be required for the data to load (read/ write).

Refer to “USB Memory Management” on page 42 for erasing the Virtual Package data and the BD-LIVE data in the USB memory device.

•

•

NOTE

SHARP cannot guarantee that all brands’ USB memory devices will operate with this player.

Do not use a USB extension cable when connecting a USB memory device to the BD STORAGE/SERVICE terminal of the player.

− Using a USB extension cable may prevent the player from performing correctly.

•

•

NOTE

To listen to secondary audio, make sure that “Secondary

Audio” is set to “On”. (See page 37.)

The secondary audio and video for Picture In Picture may automatically play back and be removed depending on the content. Also, playable areas may be restricted.

Virtual Package

For BD-Video discs compatible with Virtual Package, data is copied from the discs or internet to local storage. It is automatically copied to the local storage prior to playback. You can enjoy a variety of additional functions including secondary video, secondary audio, subtitles, movie trailers, etc.

• The playback methods vary depending on the disc. For details, refer to the disc manual.

BD-LIVE

In this Player, a variety of contents with interactive functions are available through BD-LIVE compatible

Blu-ray discs by connecting to the internet. You can enjoy the download of bonus features such as latest movie trailers to the USB memory device, communication compatible BD-J interactive games, etc.

• The available functions differ depending on the disc.

•

•

•

NOTE

Regarding playback method of BD-LIVE contents, etc., perform the operations in accordance with the instructions in the BD disc manual.

To enjoy BD-LIVE functions, perform the broadband internet connection (page 18) and communication settings

(pages 39–41).

Refer to page 38 regarding the setup to restrict access to

BD-LIVE contents.

Use of Picture in Picture function

(secondary audio/video playback)

BD-Video that includes secondary audio and video compatible with Picture in Picture can be played back with secondary audio and video simultaneously as a small video in the corner.

Primary audio/video

Secondary audio/video

25


DVD-R/-RW/BD-RE/-R Playback

DVD-R DVD-RW BD-RE BD-R

You can play back a recorded disc (DVD: VR format finalized disc only / BD: BDAV format disc only).

•

NOTE

The Title List screen also can be displayed by pressing

TOP MENU/TITLE LIST when playback is stopped or by pressing ENTER after choosing “Displays The Title List” in Setup Menu when playback is stopped.

About Title List

• The Title List can be displayed in two types, Thumbnail and

•

Title Name.

Each time you press A (Red), the screen changes between

Thumbnail and Title Name.

Thumbnail

Program 1

5/21 Fri 9:30 AM 110 Min.

1

Program

1

Program

4

Program

2

Program

5

Program

3

Program

6

3

•

NOTE

“Finalize” refers to a recorder processing a recorded disc so that it will play in other DVD players/recorders as well as this player. Only finalized DVD discs will play back in this player. (This player does not have a function to finalize discs.)

1

Playback by selecting a title

Load a recorded disc.

• The Title List screen is displayed.

Program

1

Program

2

Program

3

Program

4

Program

5

Program

6

2

3

•

•

When loading a BD disc with usage restrictions placed by a BD recorder, the password input screen appears.

Then, input your password.

If you input a wrong password three times, the disc tray will open. Close the disc tray, and then input a correct password.

If the Title List screen is not displayed, press TOP

MENU/TITLE LIST .

Press a/b/c/d to select the desired title, then press ENTER.

•

•

When seven or more titles are displayed, switch pages by pressing KSKIP/ k or LSKIP/l.

Playback of the selected title will begin.

You can playback by pressing d PLAY instead of pressing ENTER.

Press H STOP to stop playback.

A Title Name B By Chapter C Playlist D Functions

Title Name

5/21 Fri 9:30 AM

[From Old]

1 Program 1

2 Program 2

3 Program 3

4 Program 4

Program 1

110 Min.

5/21 Fri

6/15 Fri

7/3 Mon

9/18 Thu

110 Min.

110 Min.

56 Min.

40 Min.

A Thumbnail B Sorting C Playlist D Functions

1

2

3

Information of selected title

Title Name

Recording Date

Recording Duration

Caption for Color Button

1

2

3

26


1

Playback by selecting a chapter

Press B (Green) while the Thumbnail screen is displayed.

• The chapter screen is displayed.

Chapter

1

Chapter

2

Chapter

3

Chapter

4

Chapter

5

Chapter

6

2

3

•

•

When seven or more chapters are displayed, switch pages by pressing KSKIP/ k or LSKIP/l.

To return to the Thumbnail screen, press B (Green).

Press a/b/c/d to select the desired chapter, then press ENTER.

• Playback of the selected chapter will begin.

You can playback by pressing d PLAY instead of pressing ENTER.


Sorting the titles

Each time you press B (Green) while the Title Name screen is displayed, the Title Name display changes between displaying the newest title first and the oldest title first.

1

Playback by selecting a Playlist

Press C (Blue) while the Thumbnail screen is displayed.

• The Playlist screen is displayed.

5/21 Fri 9:30 AM

Program 1

110 Min.

1 Program 1

2 Program 2

5/21 Fri

6/15 Fri

110 Min.

110 Min.

1

Playing back the title you stopped while being played.

Press D (Yellow) while the Title List screen is displayed.

Playback

From Beginning From Continued

2

3

Press c/d to select the type of Playback, then press ENTER.

• Playback of the title will begin.


2

3

C Original D Functions

Press a/b to select the title, then press

ENTER.

• Playback of the selected title will begin.


27


Audio CD Playback

AUDIO CD

1

2

3

Playback from the beginning

Load an audio CD.

• The CD screen is displayed.

•

(The CD screen is displayed only when a compact disc recorded in the CD-DA format is inserted.)

Playback may begin automatically, depending on the disc.

Track 01

0:00 5:16

Functions

1 / 12

00 : 00 : 11

3 L+R

Off

4

5

6

1

2

3

Track 01

Track 02

Track 03

Track 04

Track 05

Track 06

5:16

5:10

5:23

5:03

4:44

5:08

1 / 12

Select Enter

D Functions

Press d PLAY if playback does not begin automatically or playback is stopped.


Resume playback function

• If you press d PLAY next, playback will resume from the point where the Player was previously stopped. To playback from the beginning, cancel resume mode by pressing H STOP, then press d PLAY. (This may not work depending on the type of disc. In this case, open the disc tray or enter standby.)

•

NOTE

Resume playback may not function depending on the disc.

1

2

Playback by selecting a track

Press a/b to select the track, then press

ENTER during playback or when playback is stopped.

• Playback of the selected track will begin.

Track 03

3

4

5

6

1

2

0:00

Track 01

Track 02

Track 03

Track 04

Track 05

Track 06

5:16

5:10

5:23

5:03

4:44

5:08

5:23

Functions

3 / 12

00 : 00 : 11

3 L+R

Off

3 / 12

Select Enter


D Functions

1

Operation procedure for the

“Functions” menu

2

3

4

Press D (Yellow) (Functions) when the CD screen is displayed.

• The “Functions” menu is activated.

Track 03

0:00 5:23

Functions

3 / 12

00 : 00 : 11

3 L+R

Off

3

4

5

6

1

2

Track 01

Track 02

Track 03

Track 04

Track 05

Track 06

5:16

5:10

5:23

5:03

4:44

5:08

Select Enter

3 / 12

Return

D Track select

Press a/b to select the desired setting, then press ENTER.

• When playback is stopped, only “Track” can be

• selected.

For a description of each setting, see “Functions which can be set” (Page 34).

Press a/b/c/d to set, then press ENTER.

• Operations vary depending on the setting. Follow the operation instructions on the screen.

Press n RETURN or D (Yellow) to exit the

“Functions” menu.

•

NOTE

The displayed items vary depending on the disc.

28

Playback Functions

BD VIDEO BD-R BD-RE

DVD VIDEO DVD-R DVD-RW

AUDIO CD

Slow Playback

Slow Playback functions when L SKIP/ l or

K SKIP/ k is pressed for more than 2 seconds during pause.

• Press d PLAY to return to normal playback.

•

•

NOTE

This doesn't work for audio CDs.

Reverse Slow Playback cannot be performed for BD video.

•

NOTE

Some operations in the following playback functions cannot be performed depending on the specifications of the disc.

Fast Forward/Reverse (Search)

Fast Forward/Reverse functions when G REV or

J FWD is pressed during playback.

Example : When J FWD is pressed

• The search speed will change each time you press the button.

When playing back a DVD

• You cannot fast forward or fast reverse from one title and continue to another title (except when playing audio CDs).

Skipping to the Next or the Start of the Current Chapter (Track)

Skipping (to the beginning of a chapter or track) functions when T SKIP/ k or U SKIP/l is pressed during playback.

Pause/Frame Advance Playback

Pause functions when F PAUSE is pressed during playback. (If you are playing back an audio CD, the CD will also pause.)

Frame Advance Playback functions when U SKIP/ l is pressed during Pause.

• Frame Advance Playback may not function properly with discs other than DVD-RW (VR format).

•

•

NOTE

Some BD/DVD Video discs are not compatible with Pause/

Frame Advance Playback.

Frame Advance/Reverse Playback can be performed for

DVD discs by pressing L SKIP/ l or K SKIP/k during pause.

1

2

3

Repeat Playback of a Title or

Chapter (Repeat Playback)

Play back the title or chapter you want to repeat.

Press REPEAT.

Press c/d to select the type of Repeat

Playback.

• Playback Title: Repeats the title currently being played back.

•

•

Playback Chapter: Repeats the chapter currently being played back.

Scene Selection: Repeats the specified scene of title or chapter.

Playback Title Playback Chapter Scene Selection

4

•

•

Press n RETURN to cancel without setting the type of Repeat Playback.

For Audio CD, you can select “Playing Disc”, “Playing

Track” and “Specify The Part” as Repeat Playback options.

Press ENTER.

Example : Repeat playback of a title (TITLE)

BD-VIDEO

1 / 3

5 / 2 5

00 : 20 : 30

2 English

1

1 5 . 1ch

On Title Repeat

On Title Repeat

5 Press REPEAT to return to normal playback.

29


•

•

•

•

•

•

•

NOTE

Press LSKIP/ l, the Repeat Playback is cancelled and the next chapter being play back.

Press KSKIP/ k once, the Repeat Playback is cancelled and the player returns to the start of current chapter (track).

If you press KSKIP/ k again (within about 5 seconds) the player will skip to the beginning of the previous chapter

(track).

For Partial Repeat Playback, set the start and end points within the same title.

Repeat Playback may be forbidden depending on the disc.

Partial Repeat Playback may not work in multi-angle scenes.

If you press DISPLAY, you can confirm the Repeat

Playback status.

Partial Repeat Playback (Repeat

Playback of a Specified Part)

DVD VIDEO DVD-R DVD-RW

AUDIO CD

1

2

•

NOTE

Some operations in the following playback function cannot be performed depending on the specifications of the disc.

Press REPEAT during playback.

Press c/d to select “Scene Selection”, then press ENTER.

• “Set Start Point” displays.

Playback Title Playback Chapter Scene Selection

Set Start Point

Displaying the Audio Information

You can display the audio information on the disc currently being played back by pressing AUDIO.

• The displayed contents vary depending on the disc.

BD VIDEO DVD VIDEO

The audio track currently being played back will be displayed.

If multiple audio channels are recorded, you can switch the audio channel by pressing AUDIO.

DVD-RW DVD-R

When a recorded broadcast with stereo or monaural audio is played back:

“Stereo” is displayed. (Audio cannot be switched.)

•

NOTE

When you play a program recorded in stereo or monaural, and if you are listening to the Bitstream sound via the digital output jack, you cannot select the audio channel. Set

“Audio Out” to “PCM” (Page 37), or if you want to change the audio channel, listen via the analog output jacks.

3

4

Press ENTER at the scene where you want to set the start point.

• “Set End Point” displays.

Press ENTER at the scene where you want to set the end point.

• You can press V FWD to fast forward to the scene where you want to set the end point. When you reach the desired scene, simply press I PLAY and then ENTER to set the end point. To cancel Repeat

Playback, press REPEAT.

Switching Subtitles

If subtitles are provided in multiple languages, you can switch between them.

Press SUBTITLE during playback.

•

•

•

The display indicates the subtitle number currently being played back, and the subtitles appear.

Each time SUBTITLE is pressed, the subtitles change.

“–” is displayed if a disc has no subtitles.

You can also select “Off”.

30


Switching the Angle

If multiple angles are recorded, you can switch between them.

Displaying the Angle Mark

You can change settings so that Angle Mark appears in the right bottom part of the screen when multiple angles are recorded. (The Angle Mark is displayed for BD/DVD video.) The settings can be changed in

“Settings” - “Playback Setting” - “Angle Mark Display”

(Page 38).

1

2

Press FUNCTION during playback.

• The Function Control screen is displayed on the TV.

Press a/b to select the Angle Number column, then press ENTER.

BD-VIDEO

1 / 3

0 0 : 2 0 : 3 0

2 English

1

1

Off

5 . 1 c h

3

4

Press a/b to select the desired Angle Number, then press ENTER.

• “–” is displayed if a disc is recorded with only one angle.

Press n RETURN or FUNCTION to close the

Function Control screen.

•

•

NOTE


If you access the Function Control screen during playback of a BD/DVD video, it may be impossible to operate the

BD/DVD video playback. In cases like this, close the


•

•

•

NOTE

Settings for audio and subtitles can be changed also in

Function Control screen (Page 33).

The operations of subtitles, angle and audio differ according to each disc. You may need to refer to the operation manual of the disc.

The following operations will not work when playing back an audio CD:

Slow Playback, Frame Advance

Display of functions

• The display for subtitles, angle or audio automatically disappears after 5 seconds.

Switching between functions

•

•

You can switch the subtitles and audio at the Function

Control screen (Page 33).

The operation for each function varies depending on the disc. See the manual for the disc.

Fast Forward/Reverse

• You cannot perform Fast Forward/Fast Reverse between

• titles. At the end or beginning of the title, Fast Forward/

Fast Reverse will be cancelled and normal playback will automatically resume.

Subtitles are not played back with BD/DVD video discs during Fast Forward and Fast Reverse.

Slow Playback

• You cannot perform Slow Playback between titles. At the end of the title, Slow Playback will be cancelled and normal playback will automatically resume.

Repeat Playback

•

•

Repeat Playback may be forbidden depending on the disc.

Partial Repeat Playback may not work in multi-angle scenes.

• For Partial Repeat Playback, set the start and end points within the same title.

31

JPEG File Playback

CD-R

JPEG

CD-RW

JPEG

•

•

NOTE

This Player can play still images (JPEG files) that have been recorded on CD-RW/R discs. For details on the still images that you can play using this player, refer to “About the

JPEG file format” on page 7.

During “Normal play”, still images are played one by one while during “Slide show”, they are automatically replaced one after another.

1

2

Playing back still images in sequence

Load the disc containing the still images, and press d PLAY.

•

•

The first still image appears on the screen.

Press T SKIP/ k or U SKIP/l to proceed to the next or previous still image.

The same operation can be performed by pressing c/d or S REV/V FWD.

To stop the still image playback at any time, press H STOP.

1

Playing back still images in a selected folder

2

3

Load the disc containing still images, then press

SETUP.

Press a/b/c/d to select “Picture”, then press

ENTER.

Use a/b/c/d to select the folder whose still images are to be played, then press ENTER.

8/15

1/77

4

5

Press T SKIP/ k or U SKIP/l to replace one image with another.

•

•

The same operation can be performed by pressing c/d or S REV/V FWD.

Press n RETURN if you wish to return to the folder selection screen.

To stop the still image playback at any time, press H STOP.

1

Playing back Slide Show

2

3

In Step 2 of the left side “Playing back still images in a selected folder”, press d PLAY

(Slide Show).

• The still images inside the selected folder are played as a slide show.

To pause the playback at any time, press

F PAUSE.

• Press d PLAY to resume playback.

To stop the play at any time, press H STOP.

• Press n RETURN to play a slide show of still images in another folder.

1

Setting slide show speed/repeat playback

2

Press C (Blue) (Slide Show Menu) during the folder selection screen.

• The setting screen for “Slide Show Speed”/“Repeat

Mode Setting” appears.

Press a/b to select “Slide Show Speed”, then press ENTER.

Slide Show Speed

Repeat Mode Setting

Normal

3

4

5

6

• The slide show speed may be selected from “Fast”,

“Normal”, “Slow1” and “Slow2”.

Press a/b to select the desired speed, then press ENTER.

Press a/b to select “Repeat Mode Setting”, then press ENTER.

Slide Show Speed

Repeat Mode Setting

Yes No

Press c/d to select the desired item, then press ENTER.

Press EXIT to exit.

32

Settings During Playback

Function Control

This allows you to adjust various settings at once, like subtitles, angle settings and the title selection for Direct

Playback. You can adjust the video and audio to suit your preferences. The operations are the same for BD and DVD.

Function control screen

BD-VIDEO 1

1 / 3

0 0 : 2 0 : 3 0

2 English

1

1 5 . 1 c h

Off

2

Return

3

1 Playback status display

Shows the operation status and the disc type.

2

Setting items

Selects a title (or track) or chapter for playback, or performs video/audio settings.

•

•

•

•

•

•

•

Title/Track Number (Direct Title/Track Skip)

Chapter Number (Direct Chapter Skip)

Playback Elapsed Time (Direct Time Skip)

Subtitle Language

Angle Number

Audio

Repeat

3 Operation guide display

Provides help on remote control button operations.

Function control operation procedure

1

2

Press FUNCTION during playback.

• The Function Control screen is displayed on the TV.

Press a/b to select the desired setting, then press ENTER.

• For a description of each setting, see “Functions which can be set” (Page 34).

BD-VIDEO

1 / 3

0 0 : 2 0 : 3 0

2 English

1

1

Off

5 . 1 c h

3

4

Press a/b/c/d to set, then press ENTER.

• Operations vary depending on the setting. Follow the operation instructions on the screen.

Press n RETURN or FUNCTION to close the


•

•

•

NOTE

If “– –” is displayed for an option like title number or subtitles, the disc has no titles or subtitles which can be selected.


If you access the Function Control screen during playback of a BD/DVD video, it may be impossible to operate the

BD/DVD video playback. In cases like this, close the


33

Settings During Playback

Functions which can be set

Title/Track Number (Direct Title/Track Skip)

•

•

Shows the title number being played back (or track number when playing back an audio

CD). You can skip to the start of the title (or track).

To skip to the start of a selected title (or track), press the Number buttons to enter the title (or track) number when this option is highlighted.

Chapter Number (Direct Chapter Skip)

•

•

Shows the chapter number being played back. You can skip to the start of the chapter.

To skip to the start of a selected chapter, press the Number buttons to enter the chapter number when this option is highlighted.

Playback Elapsed Time (Direct Time Skip)

•

•

Shows the time elapsed from the beginning of the current disc title (or track). This lets you skip to a specific time.

Press c/d to select the Hour, Minute or Second, then press a/b or the Number buttons to set the time. Press ENTER to start playback at the set time.

Subtitle Language

• Shows the currently selected subtitle language. If subtitles are provided in other languages, you can switch to your preferred language.

Angle Number

• Shows the currently selected angle number. If the video is recorded with multiple angles, you can switch the angle.

Audio

• Shows the currently selected type of audio. You can select the desired type of audio.

Repeat

• The current Title (or Chapter) or partial segments can be repeatedly played back. Repeat

Playback is also possible with the REPEAT button on the remote control.

•

NOTE

These functions may not work with all discs.

34

Settings

SETTINGS

Common operations

The “Menu” enables various audio/visual settings and adjustments on the functions using the remote control unit. You need to call up the OSD to perform settings for this player. The following is the explanation for the basic operations of the “Menu”.

Example: Setting “Front Display/LED”

1 2

Display the Menu screen Select a menu item

3

Displays The Title List

On Screen Language

Settings

Picture

Select the next item

Press c/d to select the desired item, then press ENTER.


Press a/b/c/d to select

“Settings”, then press

ENTER .

Press a/b to select “Front Display/

LED”, then press ENTER.

Audio Video Settings

Quick Start

Auto Power Off

AQUOS LINK

Playback Setting

Communication Setup

Front Display/LED

Version

USB Memory Management

Software Update

System Reset

4

On Off

Press n RETURN to return to the previous “Menu” page.

Exit the Menu screen


Basic Operation for Playback Setting

Example: Setting “Parental Control” under “Playback Setting”

1

2



3

Press a/b to select “Playback Setting”, then press ENTER.

4

Press a/b to select “Parental Control”, then press ENTER.

• When you operate this Player for the first time, the password setting screen will be displayed. See “When setting the password for the first time” below.

5

Enter your 4-digit password.

• You cannot move to the next setting screen until you can input the correct password.

When setting the password for the first time.

1

To set the password for the first time, press to select “Yes” to enter the password setting menu, then press ENTER.

c/d

2

3

6

Enter a 4-digit number for the password, then the same 4-digit number for confirmation.

Press ENTER to complete the password setting procedure and move to the next setting screen.

Press c/d to select the parental control level for DVD VIDEO, BD-ROM, and then select the country code. Press ENTER after making each selection.

Parental Control

Disc Language

Angle Mark Display

Password Setting

BD Internet Access

7


Level 3

0

USA

35

SETTINGS

Audio Video Settings

TV Aspect Ratio

You can set the screen aspect ratio of the connected

TV, and adjust the video output.

If you switch your TV (i.e. because you have bought a new one) and the screen aspect ratio of the connected

TV changes, you will have to change the “TV Aspect

Ratio” setting.

Item

Wide 16:9: Select this when connecting to a TV with a

16:9 screen aspect ratio.

Normal 4:3: Select this when connecting to a TV with a

4:3 screen aspect ratio.

<When selecting Normal 4:3>

Item

Letter Box: If you connect to a TV with a screen aspect ratio of 4:3 and playback a DVD with 16:9 video, the video will be played back with black bands at the top and bottom while maintaining the 16:9 ratio.

Pan Scan: If you connect to a TV with a screen aspect ratio of 4:3 and playback a DVD with 16:9 video, the video will be played back with the left and right sides of the image cut off to display in 4:3 screen aspect ratio.

(This function works if the disc is labelled for 4:3PS.)

Component Video Out

This sets the resolution of the component video output.

Some TV are not fully compatible with the Blu-ray disc player, which may cause the image distortion. In this case, press COMPONENT RESET on the remote control for five seconds. “Component Video Out” will be reset to “480i” (factory preset value).

Item

1080i, 720p, 480p, 480i

HDMI Video Out

This sets the resolution of the HDMI video output.

Some TV are not fully compatible with the Blu-ray disc player, which may cause the image distortion. In this case, press COMPONENT RESET on the remote control for five seconds. “HDMI Video Out” will be reset to “Auto” (factory preset value).

Item

Auto, 1080p, 1080i, 720p, 480p

•

NOTE

When the BD player is connected to a 1080p 24Hz compatible TV and the “HDMI Video Out” is set to

“Auto”, 1080p 24Hz will automatically be displayed when compatible discs are played back.

At 1080p 24Hz/1080p 60Hz, there is no output from the

COMPONENT VIDEO OUT jacks and VIDEO output jack.

Video Out Select

Dual video output is possible simultaneously from the

COMPONENT VIDEO OUT jacks and the HDMI OUT terminal with the following settings. Select the video output which you want to have priority according to the following chart.

•

NOTE

1080p and AQUOS LINK are only available in HDMI.

Video Out

Select

HDMI

Component

Dual

Output

HDMI

Video Out

Component

Out Resolution in Dual Mode

No

No

Yes

Yes

Auto

1080p

1080i

720p

*1

No

1080i

720p

Yes 480p 480p

*1 Depends on source. 1080p is not available.

Dual

Output

Yes

Yes

Yes

Yes

Component

Video Out

1080i

720p

480p

480i

HDMI Out

Resolution in

Dual Mode

1080i

720p

480p

480i

Item

HDMI, Component

•

•

•

When the priority video output is selected, video is output from the other video terminal with the resolution of the selected video output.

There is no output from the COMPONENT VIDEO OUT jacks and VIDEO output jack when video is output at

1080p resolution and the priority video output is selected to “HDMI”.

If the video equipment connected to each of the terminals is not compatible with the resolution of the priority video output, abnormalities in images on the screen may appear.

NOTE

When you select the priority video output, this function can also be performed by pressing the HDMI button of the remote control.

Press and hold HDMI button for 5 seconds to switch between “HDMI OUT” and “COMPONENT VIDEO

OUT”.

•

•

While you are holding the button, the current priority video output setting will be shown with the display blinking, and then the switched priority video output setting will be displayed on the front panel display.

“ ” (HDMI OUT) or “ ” (COMPONENT VIDEO

OUT) is displayed alternately on the front panel display.

36

SETTINGS

Secondary Audio

This toggles the clicking sound on the menu and audio with secondary video in picture in picture mode for

BD-Video.

• Select “Off” when enjoying the high quality sounds of BD-

Video.

Item

On, Off

Audio Out

You can set the audio output when connecting to

SURROUND equipment.

1

This sets the audio output connected to

SURROUND equipment.

Item

HDMI Output: Select this when you connect using HDMI

OUT terminal.

Digital Output: Select this when you connect using

DIGITAL AUDIO OUT terminal (OPTICAL).

2ch Audio Output: Select this when you do not use

SURROUND sound equipment.

2

1

You can set the audio output mode for each output terminal.

This sets the audio output mode for HDMI OUT terminal when selecting “HDMI Output”.

•

NOTE

When the secondary audio is set to “On”, PCM is automatically selected as the audio output mode.

Item

Bitstream:

PCM (Surround):

•

•

•

•

Select this when connecting to HDMI equipment with a built-in decoder for

DOLBY DIGITAL, etc.

Setting to Bitstream will output each audio signal by Bitstream.

Select this when connecting to multichannel HDMI equipment.

Setting to PCM (Surround) will output by LINEAR PCM by decoding audio signals recorded in each audio output mode such as DOLBY DIGITAL, DTS.

2 This sets the audio output mode for DIGITAL

AUDIO OUT (OPTICAL terminal) when selecting

“Digital Output”.

Item

Bitstream:

PCM:

•

•

•

•

Select this when connecting to

SURROUND equipment with a built-in decoder for DOLBY DIGITAL, etc.

Setting to Bitstream will output each audio signal by Bitstream.

Select this when connecting to 2 channel stereo audio equipment.

Setting to PCM will output by converting each audio signal into

PCM 2 channel audio signal.

•

NOTE

See page 44 for information on output of next generation audio formats.

Dynamic Range Control

This lets you adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume. Use this when it is hard to hear dialog.

Item

Normal: The same audio output range is played as the original recorded audio output range.

Shift*: When Dolby Digital audio is played back, the dynamic range of the audio is adjusted so that the dialog portion can be heard easily. (If the audio sounds abnormal, set to “Normal”.)

Auto: When you play back audio in the Dolby TrueHD format, the dynamic range is automatically adjusted.

* Lower the audio volume before setting. If you do not do so, the speakers may emit a loud sound or excessive output may be applied to the speakers.

Quick Start

•

•

This turns the Quick Start function on and off.

When the Quick Start function is on:

The startup time of the Player is reduced.

However, power consumption will increase.

When the Quick Start function is off:

• The player will enter the low power consumption mode when in standby condition.

Item

Yes, No

•

NOTE

When “Quick Start” is set to “Yes”, the Player requires some time to turn off.

Auto Power Off

This sets the Player so that power is automatically shut off if playback is stopped for about 10 minutes.

Item

Yes, No

AQUOS LINK

This lets you set the Player to receive the control signal from the AQUOS LINK remote control via the HDMI cable.

Item

Yes, No

•

•

NOTE

For details, refer to the operation manual of TV.

If “Component” is selected from the “Video Out Select” menu, AQUOS LINK is not available. Select “HDMI” if you want to use AQUOS LINK features.

37

SETTINGS

Playback Setting

Parental Control

This lets you set the Parental Control depending on the disc content. The available Parental Control Levels are shown below.

The 4-digit password number needs to be entered before the Parental Control Levels and the Country

Code are set. The Parental Control Levels and the

Country Code cannot be set if a password has not been created or the password is not entered.

Item (For DVD-VIDEO)

8 and Off: All DVD-video can be played.

1-7: Prohibits play of DVD-video with corresponding ratings recorded on them.

Item (For BD-ROM)

No Limit: All BD-video can be played.

0-99 year(s): Prohibits play of BD-video with corresponding ratings recorded on them.

Item (Country code)

Sets the country code. Refer to the Country Code List

(page 44) because the ratings differ according to the country.

•

NOTE

Refer to “Basic Operation for Playback Setting” on page 35 for details.

Password Setting

This sets the password for setting or changing the

Parental Control Level.

Item

Yes: Enter the 4-digit number.

No

•

•

NOTE

When you forget the password, you can reset the current password using “System Reset” under “Settings”. (See this page.)

You can also set the new password if desired.

BD Internet Access

This allows you to set access restriction to BD-LIVE contents.

Item

Permit: Allow all BD-LIVE discs.

Limit: Allow only discs with owner certification.

Prohibit: Prohibit all BD-LIVE discs.

•

•

•

NOTE

The available functions differ depending on the disc.

Regarding playback method of BD-LIVE contents, etc., perform the operations in accordance with the instructions in the BD disc manual.

To enjoy BD-LIVE functions, perform the broadband internet connection (page 18) and communication settings (pages

39–41).

Disc Language (Disc Priority Language)

This lets you select the language for subtitles, audio and menus displayed on the screen.

Item (Subtitle)

Refer to the Language List. (Page 44)

Front Display/LED

If you feel that the indicators on the Player are too bright when watching movies, you can turn them off except for the ON/STANDBY indicator.

Item

On, Off

Item (Audio)

Refer to the Language List. (Page 44)

Item (Menu)

Refer to the Language List and Language Code List.

(Page 44)

Angle Mark Display

This lets you turn the Angle Mark Display on or off when BD/DVD video recorded with multiple angles is played back. (The Angle Mark is displayed in the lower right screen.)

Item

Yes, No

Version

When you select “Version”, the system software version is displayed.

System Reset

You can reset all settings to the factory presets.

Item

Reset, Not Reset

38

SETTINGS

Communication Setup

This allows you to perform and/or change the communication setting. This setting is required to use

BD-LIVE functions that connect to the internet.

•

•

•

NOTE

Make sure that the LAN cable is connected to this Player.

(See page 18.)

For manually performing the setting, the following information of the connected router or modem is required.

Confirm the information prior to the setting.

− IP address, netmask, gateway, DNS IP address

Besides, if specifying a proxy server, the following information specified from your internet service provider is also required. Confirm the information prior to the setting.

− IP address and port number of the proxy server

5 For setting the IP address, press c/d to select

“Yes” or “No”, then press ENTER.

Do you obtain the IP address automatically?

Yes

IP Address

Netmask

Gateway

Next

No

6

7

•

•

If selecting “Yes”: The IP address is automatically obtained.

If selecting “No”: The IP address, netmask and gateway are manually entered using the screen for inputting characters. (See page 41.)

Regarding each of the setup values, confirm the specifications of your broadband router.

Select “Next”, then press ENTER.

For setting the DNS IP address, press c/d to select “Yes” or “No”, then press ENTER.

Do you obtain the DNS IP address automatically?

Yes No

Primary

Secondary

Next

1

2

3

4



Press a/b to select “Communication Setup”, then press ENTER.

Press c/d to select “Change”, then press

ENTER.

Current Ethernet setup info.

IP Address

Netmask

Gateway

DNS

Proxy

: Auto Setup

: Auto Setup

: Auto Setup

: Auto Setup

: Not Use

Change Initialize

• For initializing the current setting, select “Initialize”, then press ENTER.

8

9

•

•

If selecting “Yes”: The DNS IP address is automatically obtained. (The DHCP server function of the router or modem is used for the automatic acquisition.)

If selecting “No”: The primary and secondary IP addresses are entered using the screen for inputting characters. (See page 41.)

Regarding each of the setup values, confirm the specifications of your broadband router.


For setting the proxy server, press c/d to select “Yes” or “No”, then press ENTER.

Do you use the proxy server?

Yes

Address

Port

No

Next

•

•

If selecting “Yes”: The IP address or proxy server name and port number for the proxy server specified from your internet service provider are entered using the screen for inputting characters. (See page 41.)

If selecting “No”: Go to the next step.

(Continued on the next page)

39

SETTINGS

10

11


•

•

For the advanced setting (the setting of the

Ethernet connection speeds), press c/d to select “Yes” or “No”, then press ENTER.

•

Normally select “No”, then press ENTER.

The Ethernet connection speeds can be set when you select “Yes”, then press ENTER.

As automatic detection is made (factory preset mode), this setting is not normally necessary. If a situation occurs in which the Ethernet connection fails, etc., change the setting and confirm if the Ethernet connection successfully works.

When the connection speed is set, select “Next”, then press ENTER.

Option

Ethernet Connection Speeds

Yes

Auto-Detection

10M Half Duplex

100M Half Duplex

Next

No

10M Full Duplex

100M Full Duplex

12 For testing the connection to the internet, after confirming the settings, press c/d to select

“Test”, then press ENTER.

• “Test” is available only when setting to obtain the IP address automatically. “Test” cannot be selected if the

IP address has not been obtained automatically.

Confirm the current setting.

IP Address

Netmask

Gateway

DNS Address

MAC Address

: xxx xxx xxx xxx

: xxx xxx xxx xxx

: xxx xxx xxx xxx

: xxx xxx xxx xxx

: xx:xx:xx:xx:xx:xx

Test Complete

• As a result of the test, if the internet connection fails, enter the setup values manually.

13

Press c/d to select “Complete”, then press

ENTER.

40

SETTINGS

The operation procedure for inputting characters manually

•

NOTE

Numeric characters such as IP address can be entered on the input screen either by selecting each of the characters in the “Numeric” mode or using the Number buttons on the remote control.

IP Address

Netmask

Gateway

123

1

2

Press ENTER at the boxes in which characters are to be entered, and the input screen will appear.

Numeric

Edit

1 2 3 4 5 6 7 8 9 0

Selected by pressing a/b

Selected by pressing c/d

Press a/b to select the desired input mode.

• When inputting the address of the proxy server;

“1ABC” (Alphabet/numeric character) / “Sign” / “Edit”

• When inputting other values (IP address, etc.);

“Numeric” / “Edit”

3

4

Press c/d to select a number/character, then press ENTER.

Repeat the step 3 to display all of the desired characters/numbers in the input field.

Example: The screen for inputting numeric characters

Numeric

Edit

123

1 2 3 4 5 6 7 8 9 0

•

•

NOTE

Press n RETURN (Del.Char.) to delete a number/ character you have input.

To change a number/character you have input, press B

(Green) (Left) or C (Blue) (Right) to select the number/ character you want to change, and press n RETURN

(Del.Char.). Then, press c/d to select a new number/ character you want to input, and press ENTER.

5

Press D (Yellow) (Complete) to fix the numbers which have been input.

IP Address

Netmask

Gateway

123

6

Repeat step 1 to 5 to finish inputting all the required characters.

Input character list

1ABC (Alphabet/ numeric character)

Num.

ABC DEF

Num.

GHI

1 2 3 4 5 6 7 8 9 0

G H I g h i

PQRS P Q R S p q r s

Spc.

(space)

GHI

ABC

JKL

TUV

JKL MNO PQRS TUV WXYZ Spc.

A B C a b c

J K L j k l

T U V t u v

DEF

MNO

D E F d e f

M N O m n o

WXYZ W X Y Z w x y z

Numeric

1 2 3 4 5 6 7 8 9 0

Sign

@ . , : ; _ - \ $ % ! ?

& # + * = / | ˜

@ . , : @ . , :

& # + * & # + *

( ) < > ( ) < >

; _ - \

= / | ˜

[ ]{ }

“ ‘ ˆ `

; _ - \

= / | ˜

[ ] { }

( ) < > [ ]{ } Spc.

$ % ! ?

$ % ! ?

“ ‘ ˆ ` “ ‘ ˆ `

Spc.

(space)

Edit

*

Cancel Left Right Complete Del.Char.

The same operation as the colored buttons and n RETURN can be performed by selecting each of the items and pressing ENTER.

“Del.Char.” stands for deleting characters.

41

SETTINGS

USB Memory Management

2

3

The following instructions explain how to delete data such as the Virtual Package data and the BD-LIVE data in a USB memory device.

1

Insert the USB memory device into the BD

STORAGE/SERVICE terminal on rear of this player.

4

5



Press a/b to select “USB Memory

Management”, then press ENTER.

• “No USB Memory” appears when no USB memory is inserted.

Press a/b, select “Erase” or “Format”, then press ENTER.

Erase: Deletes only BD-VIDEO data written on the USB memory device such as BD-LIVE data.

Format: Be aware that all data including BD-VIDEO data and software update data will be deleted.

• If you want to delete only the unneeded software update data after the software is updated, delete the data on the USB memory device using a PC.

Before using the USB memory device

CAUTION:

• Do not remove the USB memory device or unplug the AC cord while the operations for “USB Memory

•

Management ” or “Software Update” are being performed.

Do not use a USB extension cable when connecting a USB memory device to the BD STORAGE/SERVICE terminal of the player.

− Using a USB extension cable may prevent the player from performing correctly.

NOTE:

• SHARP cannot guarantee that all brands’ USB memory devices will operate with this player.

Erase

Format

Erases BD-VIDEO data on USB memory.

Erase all contents on USB memory including protected contents.

•

NOTE

Data which has been saved to the player’s internal memory

(game score, etc.) will also be deleted.

6

Press c/d, select “Yes”, and press ENTER.

Yes No

7 Start the process.

• The screen for the current operation will display.

Complete

OK

8 Press ENTER.

42

SETTINGS

Software Update

2

3

This function allows software updates by inserting a

USB memory device with the update file into the BD

STORAGE/SERVICE terminal on this player.

• When a software update is performed, the software update data must be written onto the USB memory device in advance using a PC.

To check for the availability of a software update, visit www.sharpusa.com. If you have any questions, please call 1-800-BE-SHARP (800-237-

4277).

•

•

When software update data is released, copy the data onto a USB memory device after downloading it to a PC.

Delete unneeded software update data using a PC after the software update process is completed.

1

Insert the USB memory device with the update file into the BD STORAGE/SERVICE terminal on rear of this player.

4



Press a/b to select “Software Update”, then

ENTER.

• If you have not yet set the password, go to step 6.

5

Enter the 4-digit number using 0-9.

Enter 4-digit password

• If the USB memory device is not properly installed or the correct update file cannot be found on the USB memory device, an error message is displayed.

Check the file on the USB memory device, and then reinsert the USB memory device correctly.

Software update file is not detected in the USB memory device.

Confirm that you have transferred the file to the USB memory device and retry software update.

Confirm that you have inserted the USB memory device into the correct device.

OK

There is more than one software file in the USB memory device.

Confirm that only the software update file is in the USB memory device.

OK

8 Press ENTER to start updating.

• The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord.

The picture will temporarily go dark until the software update display appears.

Wait several minutes and do not unplug the AC cord.

OK

6 Press ENTER to start checking data in the USB memory device.

7

Insert USB memory device containing the software update file.

OK

During the data checking, “Checking” blinks.

Now checking the data in USB memory device.

Now updating

*

Do not unplug AC cord.

Update Version **1234567-2

30%

9 When the software is successfully updated, a screen is displayed indicating that the update process is completed.

• If the update has failed, check the file in the USB device and try Software Update again.

10

11

Press POWER to turn off the player.

Remove the USB memory device.

Checking

• The current version of this unit software and the version of the update file on the USB memory device are displayed. To update this player software with update file, select “Yes”, and press ENTER.

Software update file is detected in the USB memory device.

Start update?

Current Ver. :

Update Ver. :

Yes

**1234567

**1234567

No

43

SETTINGS

Country Code List

USA / CANADA / JAPAN / GERMANY / FRANCE / UK / ITALY / SPAIN / SWISS / SWEDEN / HOLLAND / NORWAY /

DENMARK / FINLAND / BELGIUM / HONG KONG / SINGAPORE / THAILAND / MALAYSIA / INDONESIA / TAIWAN /

PHILIPPINE / AUSTRALIA / RUSSIA / CHINA

Language List

English / Français / Deutsch / Italiano / Español / Japanese / Svenska / Nederlands

Language Code List

AA Afar / AB Abkhazian / AF Afrikaans / AM Ameharic / AR Arabic / AS Assamese / AY Aymara / AZ Azerbaijani / BA Bashkir /

BE Byelorussian / BG Bulgarian / BH Bihari / BI Bislama / BN Bengali, Bangla / BO Tibetan / BR Breton / CA Catalan /

CO Corsican / CS Czech / CY Welsh / DA Danish / DE German / DZ Bhutani / EL Greek / EN English / EO Esperanto /

ES Spanish / ET Estonian / EU Basque / FA Persian / FI Finnish / FJ Fiji / FO Faroese / FR French / FY Frisian / GA Irish /

GD Scots Gaelic / GL Galician / GN Guarani / GU Gujarati / HA Hausa / HI Hindi / HR Croatian / HU Hungarian / HY Armenian /

IA Interlingua / IE Interlingue / IK Inupiak / IN Indonesian / IS Icelandic/ IT Italian / IW Hebrew / JA Japanese / JI Yiddish /

JW Javanese / KA Georgian / KK Kazakh / KL Greenlandic / KM Cambodian / KN Kannada / KO Korean / KS Kashmiri /

KU Kurdish / KY Kirghiz / LA Latin / LN Lingala / LO Laothian / LT Lithuanian / LV Latvian, Lettish / MG Malagasy / MI Maori /

MK Macedonian / ML Malayalam / MN Mongolian / MO Moldavian / MR Marathi / MS Malay / MT Maltese / MY Burmese /

NA Nauru / NE Nepali / NL Dutch / NO Norwegian / OC Occitan / OM Afan (Oromo) / OR Oriya / PA Panjabi / PL Polish /

PS Pashto, Pushto / PT Portuguese/ QU Quechua / RM Rhaeto-Romance / RN Kirundi / RO Romanian / RU Russian /

RW Kinyarwanda / SA Sanskrit / SD Sindhi / SG Sangho / SH Serbo-Croatian / SI Singhalese / SK Slovak / SL Slovenian /

SM Samoan / SN Shona / SO Somali / SQ Albanian / SR Serbian / SS Siswat / ST Sesotho / SU Sundanese / SV Swedish /

SW Swahili / TA Tamil / TE Telugu / TG Tajik / TH Thai / TI Tigrinya / TK Turkmen / TL Tagalog / TN Setswana / TO Tonga /

TR Turkish / TS Tsonga / TT Tatar / TW Twi / UK Ukrainian / UR Urdu / UZ Uzbek / VI Vietnamese / VO Volapuk / WO Wolof /

XH Xhosa / YO Yoruba / ZH Chinese / ZU Zulu

About Output of Next Generation Audio Formats

Next generation audio formats

Maximum number of channels

Dolby TrueHD

Dolby Digital PLUS

DTS-HD Master Audio

DTS-HD High Resolution Audio

LPCM

7.1ch (48kHz/96kHz)

5.1ch (192kHz)

7.1ch (48kHz)

7.1ch (48kHz/96kHz)

5.1ch (192kHz)

7.1ch (48kHz/96kHz)

7.1ch (48kHz/96kHz)

5.1ch (192kHz)

* 1 Core only

* 2

Down mixed

* 3

When “Secondary Audio” is set to “On”, the audio is output as 48kHz.

* 4

When “Secondary Audio” is set to “On”, the audio is output as PCM.

* 5

When 5.1ch (192kHz), the audio output is downsampled to 96kHz.

* 5 When 2ch, the audio is output as 192kHz.

PCM

7.1ch * 3

5.1ch * 3

7.1ch * 3

7.1ch * 3

5.1ch * 3/ * 5

7.1ch * 3

7.1ch * 3

5.1ch * 3

HDMI

Bitstream

7.1ch * 4

5.1ch * 4

7.1ch * 4

7.1ch * 4

5.1ch * 4

7.1ch * 4

—

—

DIGITAL OUT

PCM

2ch * 2

2ch * 2

2ch * 2

2ch * 2

2ch * 2

2ch * 2

2ch * 2

2ch * 2

Bitstream

5.1ch * 1/ * 3

5.1ch * 1/ * 3

5.1ch * 1/ * 3

5.1ch * 1/ * 3

5.1ch * 1/ * 3

5.1ch * 1/ * 3

—

—

44

Appendix

Troubleshooting

The following problems do not always suggest a defect or malfunction of this Player.

Refer to the problems and lists of possible solutions below before calling for service.

Power

Problem

The Player power cannot be turned on.

The Player power is turned off.

Possible causes and solutions

•

•

•

Is the power cord firmly plugged into the AC outlet? (Page 19)

When the power cord is plugged into an AC outlet, press and hold POWER on the

Player until “ ” appears on the front panel display. Then, after the ON/

STANDBY indicator is lit, turn on the power. (Page 47)

Press POWER after the ON/STANDBY indicator turns on. (Page 20)

• Is “Auto Power Off” set to “Yes”? When “Auto Power Off” is set to “Yes”, the power will be automatically turned off after 10 continuous minutes of inactivity (no playback). (Page 37)

Basic Operation

Problem

The remote control does not work.

Cannot operate the Player.


•

•

•

Use the remote control within its operating range. (Page 19)

Replace the batteries. (Page 19)

Reset the remote control.

− Press and hold 1 (the number button) first and then POWER on the remote control together for more than 5 seconds.

• Are you operating the Player within the specified operating temperature range?

(Page 50)

Disc Playback

Problem

The Player cannot play a disc.

The disc is automatically ejected after closing the disc tray.

Video stops.

The Player makes a snapping sound when starting playback or loading a disc.


•

•

•

•

•

•

•

•

•

Take out the disc and clean it. (Page 9)

Make sure that the disc is loaded properly (aligned in disc tray and label-side up).

(Page 23)

Make sure that region code on the disc matches that of this Player. (Page 6)

Allow any condensation in or near the Player to dry. (Page 9)

Check that the disc is recorded in the compatible TV system (PAL or NTSC).

The Player cannot play back video which was not recorded normally. (Page 6)

Proper playback may be impossible due to the state of the disc recording, a scratched, warped or dirty disc, the state of the pick-up, or compatibility issues between this Player and the disc being used. (Pages 6, 9)

When the recorded time of a disc is unusually short, playback may not be possible.

BD-RE/R discs recorded in a format other than BDMV/BDAV cannot be played back. (Page 6)

•

•

•

•

Make sure that the disc is loaded properly (aligned in disc tray and label-side up).

(Page 23)



Make sure that the disc is playable. (Page 6)

• Has the Player been subjected to shock or impact? Are you using it in an unstable location? The Player will stop if it senses shock or vibration.

• The player may sometimes make a snapping sound when starting playback if it has not been operated in a while. These sounds are not malfunctions of the player but are normal operating conditions.

(Continued on the next page)

45

Troubleshooting

Picture

No picture.

Problem

Screen freezes and operation buttons do not work.


•

•

•

•

•

•

Make sure that the cables are connected correctly. (Pages 14–16)

Make sure that the connected TV or the AV receiver is set to the correct input.

(Pages 14–16)



There is no picture from the HDMI output.

− Are the settings performed correctly? Please check the settings. (Page 36)

There is no picture from the component video output.

− Are the settings performed correctly? Please check the settings. (Page 36)

•

•

•

•

Press H STOP, then restart playback.

Turn off the power and turn on the power again.

If the power is not turned off, perform a reset. (Page 47)

Is the disc damaged or dirty? Check the condition of the disc. (Page 9)

• Is the connection cable for video output connected properly? (Pages 14–16)

•

•

Is “TV Aspect Ratio” set to match the connected TV? (Page 36)

If you are using a widescreen TV, is the “TV Aspect Ratio” set to “Wide”? (Page 36)

There is just audio with no video.

Widescreen video appears vertically stretched, or black bands appear at the top and bottom of the screen.

Square noise (mosaic) appears on the screen.

The playback screen will be disturbed if DVD video is recorded to a VCR, or played back through a

VCR.

Audio is not output, or images are not played back properly.

• Blocks in images may be visible in scenes with rapid movement due to the characteristics of digital image compression technology.

• This Player complies with analog copy protection. Some discs contain a copy prohibiting signal. If you try to play back such discs through a VCR, or record to a

VCR and play back the signal, the copy protection will prevent normal playback.

(Pages 15–16)

• The audio may not be output or the images may not be played back properly for some discs in which copyright-protected contents are recorded.

Sound

Problem

No sound, or sound is distorted.

Left and right channels of audio are reversed, or sound comes out of only one side.

Audio is not output, or images are not played back properly.

•


•

•

•

•

•

•

•

If the volume of the TV or amplifier is set to minimum, turn the volume up.

There is no sound during still mode, slow motion playback, fast forward and fast reverse. (Page 29)

DVD audio recorded in DTS is only output from the DIGITAL AUDIO OUT terminal.

Connect a DTS compatible digital amplifier or decoder to the DIGITAL AUDIO OUT

OPTICAL terminal on this Player. (Page 17)

Check that the audio cable is connected correctly. (Page 17)

Check that the cable plugs are clean.


Audio may not be output depending on the audio recording status, such as when audio other than an audio signal or non-standard audio is recorded for the audio content of the disc. (Page 6)

Are left and right audio cables connected to the opposite terminal, or is one side disconnected? (Page 17)

• The audio may not be output or the images may not be played back properly for some discs in which copyright-protected contents are recorded.

Network

Problem

Cannot connect to the Internet.


•

•

•

•

•

Is the LAN cable connected properly?

Is the wrong cable such as a modular cable used? Connect a LAN cable to the

ETHERNET terminal. (Page 18)

Is the power for the connected equipment, such as broadband router or modem turned on?

Is the broadband router and/or modem properly connected?

Is the proper value(s) set in the network setting? Check “Communication Setup”.

(Pages 39–41)

46

Troubleshooting

Network (Continued)

Problem

Cannot download BD-LIVE contents.


•

•

•

•

Is the LAN cable connected properly?

Is the USB memory device properly connected? Check that the USB memory device is connected to the BD STORAGE/SERVICE terminal of this Player.

Check if the BD disc supports BD-LIVE.

Check the setting for “BD Internet Access”. (Page 38)

Other

Problem

The TV operates incorrectly.

The Player heats up during use.

ON/STANDBY indicator will remain lit.


• Some TVs with wireless remote control capability may operate incorrectly when using the remote control of this Player. Use such TVs away from this Player.

• When using this Player, the console cabinet may heat up depending on the usage environment. This is not a malfunction.

• When the AC cord is removed from the outlet, the ON/STANDBY indicator will remain lit for a short period. This is normal and is not a malfunction.

To Reset this Player

• If this Player receives strong interference from a source such as excessive static electricity, strong external noise, malfunction of power supply, or voltage caused by lightning during use or a wrong operation is sent to the Player, errors like the Player not

•

•

• accepting an operation may occur. Press and hold POWER on the Player until “ ” appears on the front panel display when the Player does not operate properly even after the power has been turned off. Then, after the ON/STANDBY indicator is lit, turn on the power.

When a reset is performed while the power is on, the Player will turn off. Turn the power on again. At this point, it may take a few moments for the system processing to finish before the Player is ready for use. During the system processing, the

BD/DVD/CD mode indicator on the front panel display of the Player will blink. Once the system processing has finished, the indicator will finish blinking and then light up normally. You can operate the Player when the BD/DVD/CD mode indicator is lit.

Since all settings including the language setting stored in memory are also reset when a reset has been performed, they must be set again.

When the problem persists even after performing a reset, unplug the AC cord and plug it in again. If this does not solve the problem, contact the nearest service center approved by SHARP.

On-screen Error Messages

Messages Relating to BD disc and DVD disc

• The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the operation is not correct.

Error message

Cannot play.

Incompatible disc.

Possible Error Suggested Solution

• The disc cannot be played back with this Player.

• If you load a disc which cannot be played with this Player (i.e. a scratched disc), or if you load a disc upside down, this message will appear, and the disc tray will automatically pop out.

• Check the disc, and load it correctly.

• Occurs if the loaded disc cannot be played because it is a non-standard disc or scratched, etc.

• Remove the disc.

• Occurs if an operation is incorrect.

• Occurs if there is a formatting error.

•

—

Format the USB memory again.

Cannot operate.

This USB memory is not formatted properly. Please format the memory in

USB memory management.

The Connected USB Memory cannot be used. It should be compliant with

USB 2.0

• Occurs if USB memory not compliant with USB 2.0 High Speed (480Mbit/s) is used (i.e. USB 1.0/USB 1.1).

• Connect USB 2.0 High Speed

(480Mbit/s) compliant USB memory.

47

Glossary

BDAV (Page 6)

BDAV (Blu-ray Disc Audio/Visual, BD-AV) refers to one of the application formats used for writable Blu-ray discs such as

BD-R, BD-RE, etc. BDAV is a recording format equivalent to

DVD-VR (VR mode) of the DVD specifications.

BD-J application

The BD-ROM format supports Java for interactive functions.

“BD-J” offers content providers almost unlimited functionality when creating interactive BD-ROM titles.

BD-LIVE (page 25)

A variety of interactive content is available from BD-LIVE compatible Blu-ray discs via the internet.

BDMV (page 6)

BDMV (Blu-ray Disc Movie, BD-MV) refers to one of the application formats used for BD-ROM which is one of the

Blu-ray Disc specifications. BDMV is a recording format equivalent to DVD-video of the DVD specification.

BD-R (pages 6, 23)

A BD-R (Blu-ray Disc Recordable) is a recordable, write-once

Blu-ray Disc. Since contents can be recorded and cannot be overwritten, a BD-R can be used to archive data or for storing and distributing video material.

BD-RE (pages 6, 23)

A BD-RE (Blu-ray Disc Rewritable) is a recordable and rewritable Blu-ray Disc.

BD-ROM

BD-ROMs (Blu-ray Disc Read-Only Memory) are commercially produced discs. Other than conventional movie and video contents, these discs have enhanced features such as interactive content, menu operations using pop-up menus, selection of subtitle display, and slide shows. Although a

BD-ROM may contain any form of data, most BD-ROM discs will contain movies in High Definition format for playback on

Blu-ray Disc players.

Blu-ray Disc (BD) (page 6)

A disc format developed for recording/playing high-definition

(HD) video (for HDTV, etc.), and for storing large amounts of data. A single layer Blu-ray Disc holds up to 25 GB, and a dual-layer Blu-ray Disc holds up to 50 GB of data.

Chapter number (pages 33, 34)

Sections of a movie or a music feature that are smaller than titles. A title is composed of several chapters. Some discs may only be comprised of a single chapter.

Copy guard

This function prevents copying. You cannot copy discs marked by the copyright holder with a signal which prevents copying.

Disc menu (page 24)

This lets you select things like the subtitle language or audio format using a menu stored on the DVD video disc.

Dolby Digital

A sound system developed by Dolby Laboratories Inc. that gives movie theater ambience to audio output when the product is connected to a Dolby Digital processor or amplifier.

Dolby Digital Plus

A sound system developed as an extension to Dolby Digital.

This audio coding technology supports 7.1 multi-channel surround sound.

Dolby TrueHD

Dolby TrueHD is a lossless coding technology that supports up to 8 channels of multi-channel surround sound for the next generation optical discs. The reproduced sound is true to the original source bit-for-bit.

DTS

This is a digital sound system developed by DTS, Inc. for use in cinemas.

DTS-HD High Resolution Audio

DTS-HD High Resolution Audio is a new technology developed for the next generation high definition optical disc format.

DTS-HD Master Audio

DTS-HD Master Audio is a lossless audio compression technology developed for the next generation high definition optical disc format.

DTS-HD Master Audio | Essential

DTS-HD Master Audio | Essential is a lossless audio compression technology developed for the next generation high definition optical disc format.

DVD upscaling (page 23)

Upscaling (upconverting) refers to a function of various players and devices that enlarge the image size to fit the size of the screen of video equipments such as a TV.

DVD video (pages 6, 23)

A disc format that contains up to eight hours of moving pictures on a disc the same diameter as a CD. A single-layer single sided DVD holds up to 4.7 GB; a double layer singlesided DVD, 8.5 GB; a single layer double-sided DVD, 9.4

GB; double-layer double-sided DVD, 17 GB. The MPEG 2 format was adopted for efficient video data compression. It is a variable rate technology that encodes the data to according to the status of the video for reproducing high-quality images.

Audio information is recorded in a multi-channel format such as Dolby Digital, allowing for a realistic audio presence.

DVD+/-R (pages 6, 23)

A DVD+/-R is a recordable, write-once DVD. Since contents can be recorded and cannot be overwritten, a DVD+/-R can be used to archive data or for storing and distributing video material. The DVD+/-R has two different formats: VR format and Video format. DVDs created in Video format have the same format as a DVD video, while discs created in VR (Video

Recording) format allow the contents to be programed or edited.

DVD+/-RW (pages 6, 23)

A DVD+/-RW is a recordable and rewritable DVD. The rerecordable feature makes editing possible. The DVD+/-RW has two different formats: VR format and Video format. DVDs created in Video format have the same format as a DVD video, while discs created in VR (Video Recording) format allow the contents to be programed or edited.

HDMI (page 14)

HDMI (High-Definition Multimedia Interface) is an interface that supports both video and audio on a single digital connection. The HDMI connection carries standard to high definition video signals and multi-channel audio signals to

AV components such as HDMI equipped TVs, in digital form without degradation.

48

Glossary

Interlace format

Interlace format shows every other line of an image as a single “field” and is the standard method for displaying images on television. The even numbered field shows the even numbered lines of an image, and the odd numbered field shows the odd numbered lines of an image.

JPEG (pages 6, 7, 32)

JPEG (Joint Photographic Experts Group) is a still image data compression format and is used in most of digital cameras.

Letter Box (LB 4:3) (page 36)

A screen size with black bars on the top and bottom of the image to allow viewing of wide-screen (16:9) material on a connected 4:3 TV.

Linear PCM Sound

Linear PCM is a signal recording format used for Audio CDs and on some DVD and Blu-ray discs. The sound on Audio

CDs is recorded at 44.1 kHz with 16 bits. (Sound is recorded between 48 kHz with 16 bits and 96 kHz with 24 bits on DVD video discs and between 48 kHz with 16 bits and 192 kHz with 24 bits on BD video discs.)

MPEG-2

MPEG-2 (Moving Picture Experts Group phase 2) is one of the video data compression schemes, which is adopted for

DVD videos and digital broadcasts worldwide. Some Blu-ray

Discs also use high bitrate MPEG-2.

Multi Angle (pages 31, 33, 34)

This is a feature of DVD and BD video discs. In some discs, the same scene is shot from different angles, and these are stored in a single disc so you can enjoy playback from each angle. (This function can be enjoyed if the disc is recorded with multiple angles.)

Multi Audio

This is a feature of DVD and BD video discs. This function makes it possible to record different audio tracks for the same video, so you can enhance your enjoyment by switching the audio. (You can enjoy this function with discs recorded with multiple audio tracks.)

Pan Scan (PS 4:3) (page 36)

A screen size that cuts off the sides of the image to allow viewing of wide-screen (16:9) material on a connected 4:3 TV.

Parental control (page 38)

In some digital broadcasts and BD/DVD video discs, a control level for disc viewing is set depending on the age of the viewer. With this Player, you can set the control level for viewing such broadcasts and discs.

Pop-up menu (page 24)

An enhanced menu operation available on BD video discs.

The pop-up menu appears when POP-UP MENU is pressed during playback, and can be operated while playback is in progress.

Progressive format

Compared to the Interlace format that alternately shows every other line of an image (field) to create one frame, the

Progressive format shows the entire image at once as a single frame. This means that while the Interlace format can show

30 frames/60 fields in one second, the Progressive format can show 60 frames in one second. The overall picture quality increases and still images, text, and horizontal lines appear sharper.

Region code (page 6)

Code identifying a geographic region of compatibility for a

BD/DVD.

Resume playback (pages 23, 28)

If you stop playback while it is in progress, the Player stores the stop position in memory, and this function lets you playback from that point.

Skip (page 29)

This returns to the start of the chapter (or track) being played, or skips to the next chapter (or track).

Subtitles (pages 30, 33, 34)

These are the lines of text appearing at the bottom of the screen which translate or transcribe the dialog. They are recorded on many DVD and BD video discs.

Time number

This indicates the play time which has elapsed from the start of a disc or a title. It can be used to find a specific scene quickly. (It may not work with some discs.)

Title number (pages 33, 34)

These numbers are recorded on DVD and Blu-ray discs.

When a disc contains two or more movies, these movies are numbered as title 1, title 2, etc.

Top menu (page 24)

In a BD/DVD video, this is the menu for selecting things like the chapter to be played back and the subtitle language. In some DVD videos, the top menu may be called the “Title

Menu”.

Track number (pages 33, 34)

These numbers are assigned to the tracks which are recorded on audio CDs. They enable specific tracks to be located quickly.

x.v.Color

x.v.Color reproduces a greater range of color than before, showing almost all of the colors that the human eye can detect. (Applicable for JPEG files only with this system)

49

Specifications

General

Power supply

Power consumption (Normal)

Power consumption (Standby)

Dimensions

Weight

Operating temperature

Storage temperature

Operating humidity

TV systems

AC 120V, 60Hz

18 W

0.5 W (When “Quick Start” is set to “No”)

Approx. 17 1 /

64 g 2 9 /

32 g 10 1 /

4

inch (W g H g D)

Approx. 432 mm g 58 mm g 260 mm (W g H g D)

Approx. 6.0 lbs. (2.7 kg)

41°F to 95°F (5°C to 35°C)

–4°F to 131°F (–20°C to 55°C)

10 % to 80 % (no condensation)

NTSC system

Playback

Playable discs BD-ROM, BD-RE Dual Layer, BD-R Dual Layer,

DVD Video, DVD+RW/+R/-RW/-R Dual Layer (Video/VR format),

Audio CD (CD-DA), CD-RW/R (CD-DA, JPEG file format)

Input/Output

HDMI

Component video output

Video output

Digital audio optical output

Audio output

USB input

HDMI 19-pin standard connector (1080p 24Hz output)

HDMI™ (V.1.3 with x.v.Color, Dolby TrueHD, DTS-HD Master Audio | Essential)

Output level:

Y: 1 Vp-p (75 ohms)

P

B

/C

B

Jacks: RCA jack

, P

R

/C

R

: 0.7 Vp-p (75 ohms)

Output level: 1 Vp-p (75 ohms)

Jack: RCA-pin jack

Terminal: Square Optical terminal

Output level: 2 V rms (Output impedance: 1k ohms)

Jacks: RCA jack

USB 2.0 High Speed (480Mbit/s) correspondence (for Local storage/Software update)

10BASE-T/100BASE-TX ETHERNET

Specifications are subject to change without notice.

50

CONSUMER LIMITED WARRANTY

(Valid for warranty service in the U.S. and PUERTO RICO only)

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the

“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely for the non-commercial, household use of the Product by consumers in their home or residence.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.

To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE

EXCLUDED, ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY,

FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLI-

CABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION OF

SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY

FROM STATE TO STATE.

The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the

Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence, lack of reasonable care, alteration, modification, tampering, improper operation or maintenance or any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA. AND

PUERTO RICO

Model Specific Section

Your Product Model Number & Description: BD-HP17U BLU-RAY DISC PLAYER

(Be sure to have this information available when you need service for your Product.)

One (1) year parts and labor from the date of purchase.

Warranty Period for this Product:

Additional Item(s) Excluded from

Warranty Coverage (if any): Non-rechargeable batteries.

Where to Obtain Service:

What to do to Obtain Service:

From a Sharp Authorized Servicer located in the United

States. To find the location of the nearest Sharp Authorized

Servicer, call Sharp toll free at 1-800-BE-SHARP.

Please transport the Product in its original packaging and ensure that the Product is covered to avoid scratches and damage. Sharp shall not be responsible for lost, stolen or misdirected mail or for damage to the product incurred during shipping.

TO OBTAIN PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com

51

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

SHARP CORPORATION

<VRD1237-A>

Printed in China

Impreso en China

TINS-E176WJQZ

09P03-CH-NG

BD-HP17U

BLU-RAY DISC PLAYER

REPRODUCTOR DE DISCO BLU-RAY

OPERATION MANUAL

MANUAL DE MANEJO

No results