sales catalogue
SALES
CATALOGUE
From January 1st 2015
MAKE IT WONDERFUL
MISSION OF FRANKE WATER SYSTEMS
Franke Water Systems is a world leading provider of intelligent washroom solutions to
the public, semi-public and commercial sector. We continually raise our capability and
performance in reliability, service, innovation and know how, enabling our professional
customers to set benchmarks of their own. We are expert partners, dedicated to create
complete washroom systems that outshine the rest in functionality, design and durability.
Clients
Crown House
Balfour Beatty
Wolseley Group
NG Bailey
NHS Trusts
Jewsons
JT Ellis
Travis Perkins
BAM
Grafton Group
Projects 2014
NMBS
PTS
CEDABOND
Grahams
PHG Group
Vinci
Lorne Stewart
Interserve
Co-operative Group
Greater London House Offices
Winchmore School
Warwickshire University
Babington Community College
City of Leicester College
Bristol Royal Infirmary
Ravenhill Rugby Stadium
George Salter Academy
Jaguar Land Rover
University of Liverpool Guild of Students
Blackpool Harbour
Franke Sissons Ltd, Carrwood Road, Sheepbridge, Chesterfield S41 9QB, England
Tel +44 (0)1246 450255, Fax +44 (0)1246 451276, Email ws-info.uk@franke.com, www.franke.co.uk
1
Introduction
3
Sanitaryware
13
Accessories and hand dryers
25
Washbasins and washtroughs
53
Drinking fountains
79
General purpose, bucket and utility sinks
83
Medical and laboratory
91
Catering sinks, tables and equipment
103
Index by product code
115
2
3
ABOUT US
Part of the Water Systems Division of the Franke Group, Franke Sissons designs and
manufactures commercial stainless steel and composite sanitaryware products for
commercial buildings. Established in 1784, W&G Sissons were one of the first in the world
to manufacture domestic and commercial sinks from stainless steel.
We were acquired by the Franke group in 2002 and
changed our name to Franke Sissons Ltd. We now
form part of the Water Systems Division of Franke.
From the manual manufacturing processes of the
18th century, to our modern day lean manufacturing
production, our commitment to continuous
improvement and over 230 years experience has made
us the trusted provider of choice to our customers
including Architects, Specifiers and Planners,
Distributors, Contractors and Installers.
Pictured right,
the W&G Sissons
workshop (1874)
and far right the
modern day lean
manufacturing
production plant
in Chesterfield.
ACCREDITATIONS
Having held the prestigious accreditation since 2008, ISO9001
is a rigorous set of standards recognised globally. It provides peace
of mind that we have demonstrated the highest quality control of activities.
Following the new CPR regulations from 1st July 2013, all of our products (if they fall within
a harmonised European standard) conform to the new CE Marking requirements. Our
Declarations of Performance (DoPs) can be found on our website and products are labelled
accordingly. In addition, all the WCs produced by Franke Sissons are manufactured to BS
EN 997 and have met the performance criteria for 4, 5 and 6 litre flushing.
NBS Plus is a library of building products, which allows subscribers to view images
and technical information to aid specification. Franke Sissons have over 200 products
listed. We also have a number of BIM models, please ask us for more details.
We offer a choice of RIBA approved CPD interactive seminars – a must for anyone
designing and specifying washrooms in any commercial project. Please ask your
Business Development Manager for more details.
Water efficient washroom products including low flush WCs and waterless urinals,
help to significantly reduce the amount of water used in washrooms and can assist
specifiers in achieving BREEAM points for specific projects.
The Enhanced Capital Allowance (ECA) scheme enables businesses to claim up to
100% first year capital allowances on investments in technologies and products that
encourage sustainable water use. The Water Technology List (WTL) provides details of
products that qualify for this. Look for the logo on applicable products.
SERVICE AND
SUPPORT
Comprehensive Technical Backup
and Service
- Franke Sissons are committed to
providing the very highest levels of
technical support to our customers.
Our customer service team is on hand
to provide you with answers to your
technical queries.
- Our website www.franke.co.uk also
has comprehensive information on
our products including downloadable
data sheets.
- Technical product specifications
on NBS Plus.
- CPD training delivered in a handy
lunchtime presentation format at a
location to suit you.
- Training facilities and showroom.
Capacity
- We have the capacity to deliver any
size project; large or small and to suit
any budget.
Bespoke Design Service
Water Regulations Advisory Scheme, promote, encourage and enforce for the
prevention of waste, undue consumption, misuse, or contamination of water. Franke
Sissons have many water controls that are WRAS approved.
Franke Sissons are supportive members of the BMA (Bathroom Manufacturers
Association) who provide an independent forum for bathroom manufacturers trading in
the UK to properly discuss and debate matters of mutual interest. They also promote
the water label; a database of products, which when installed and used correctly will
use less water, save energy and save money. See the logo on applicable products.
- We have provided many of our
customers with special products that
are either variations on our standard
product range, such as special
length urinals, or complementary to
our standard products. We can also
provide products in different materials
and finishes for specific requirements.
4
FRANKE’S NEW APPEARANCE:
AN OVERVIEW
Welcome to the wonderful world of Franke. With our new branding, we want to put a smile
on the face of everyone who comes into contact with our people, products and services.
Our aim is not only to have a brand, we also want to live it.
Our new appearance is all about the enhancement of our strategy
“One Franke, One Strategy, One Brand”. We have developed an emotional
brand campaign that brings more humour, creativity and inspiration to our
rather unemotional industrial environment. Hand-drawn illustrations show
imaginatively staged everyday moments relating to our products. They
show in a playful manner our new Make It Wonderful brand promise.
WHY MAKE IT WONDERFUL?
Franke stands for traditional, top-quality and down-to earth products
that accompany us in our daily lives. They are subject to wear and
tear, and therefore need to be durable and reliable. We want to make
these everyday objects, which we produce and that are in everyday
use, a little less ordinary by making them more beautiful and better.
That’s what Make It Wonderful stands for. That’s our brand promise
and it means in summary that, whether you are a business partner or
an end user, we make your everyday life a little less ordinary.
5
TOP ILLUSTRATORS FOR
MAKE IT WONDERFUL
Illustrators from all around the world have been commissioned for the brand
campaign. Franke consciously opted for eight internationally renowned artists to
depict the world of Franke with hand-drawn inspiring illustrations and an emotional,
natural style.
Depending on the style, the artists were assigned to the various divisions within the
Franke Group. With sample sketches, the artists were shown what statements and
ideas need to be presented with Make It Wonderful. The artists were then granted any
freedom they wanted. There was only one requirement: Make It Wonderful!
Franke aims to
make everyday
life a little less
ordinary...
In addition to the stylistic diversity of the doodles, it was important to us to convey
emotions and stories around our products. The illustrations visualise in a very creative,
playful way ideas or musings of all the things that can be done with our products.
Franke aims to make everyday life a little less ordinary and provide our customers
with perfect support in your everyday lives with our products.
OUR WEBSITE
Visit our website at www.franke.co.uk for all our latest news, case studies and to
download technical data sheets, CAD drawings and revit files for our products.
Click on Water Systems
Click on United Kingdom, then Next
Download technical datasheets,
CAD drawings and revit files
6
WHY CHOOSE
STAINLESS STEEL?
The use of stainless steel as the material of first choice for products in public and semi-public washrooms
has become today’s standard for good reason.
This material is robust, easy to maintain, and therefore very durable
which makes the products economical over the lifetime of the
building. Sanitary fixtures that inhibit vandalism and are easy to
clean, help building operators to keep service and maintenance costs
to a minimum.
Stainless steel is not only resistant to moisture and most acids, it also
stands out due to its hardness, high tolerance of heat and cold, and
hygienic characteristics which makes it the first choice for hospitals
and food processing plants. Dirt and oil can easily be washed from the
smooth, pore-free surface without the need for harsh cleaning products
and scratches and grooves on covers lose their sharp edges quickly and
blend in to the surface.
Stainless steel is a low carbon steel that contains at least 10.5%
chromium (Cr) and no more than 1.2% carbon (C). They form a selfregenerating surface layer (passive layer) that gives the material
resistance to corrosion, thereby ensuring significantly improved
characteristics compared to unalloyed steels. Chromium is the key
ingredient which makes the metal stainless and rust resistant therefore
it ages gracefully. Franke uses steels with a higher chromium content
and nickel as an additional alloy component for its sanitary fixtures. This
combination further increases its resistance to corrosion.
Over 70% of new stainless steel comes from melted down stainless
steel scrap. Its main component is scrap iron, of which there is no
shortage, while other metallic elements alloyed with the iron are
chromium and molybdenum which are plentiful within the earth’s
crust. Nickel, which comprises around 10% of the standard austenitic
stainless steel grades, is less abundant but is not in short supply and
is being recycled effectively.
More efficient process technology has allowed steelmakers to
significantly reduce the amount of energy used in the production
of stainless steel over the past two decades. Stainless steel’s low
thermal conductivity makes soldering and welding more energy
efficient than with many other metals. Stainless steel washroom
and sanitaryware has an extremely long life expectancy and as
such the energy used in manufacture is spread over a long period,
providing the most economic long term solution compared with other
materials. This is especially true when maintenance costs over the
lifetime of the installation are taken into account.
Stainless steel is 100% recyclable
7
SURFACES
OVERVIEW
Material number 1.4301 (AISI 304) is used in accordance with DIN EN
10088. The formula 18/10 stands for 18% chromium and 10% nickel.
This composition gives the material its particular characteristics.
Stainless steel high polished
The surface for high-quality requirements
Stainless steel satin-finished
Satin polish for general applications
InoxPlus surface refinement
Makes fingerprints almost invisible
MATERIAL
CHARACTERISTICS
STAINLESS STEEL
CLEAN & CARE
MaterialNo.
AISI
Composition
Characteristics
Practical experiences show that using high-quality materials reduces
the staining of products that helps to maintain the appearance of
heavily used washrooms.
$S/J
Wash stations and accessories take on a hygienic atmosphere. Thanks
to its durable and hygienic characteristics, stainless steel provides
clean and safe products for public washrooms.
t WFSZHPPEMFWFMPG
corrosion-resistance
t BEEJUJPOPG
nickel improves the
corrosion-resistance
t OPONBHOFUJD
-
$S
12 Ni/
.P
t FYDFMMFOUMFWFMPG
corrosion-resistance
tBEEJUJPOPG
molybdenum makes
V4A (1.4435)
highly resistant to
corrosion and to
most acids
Brushes with natural or plastic bristles, textiles out of natural or
chemical fibres, micro fibre towel, plastic fleece, leather, sponge
cloth, sponges, pressure washer, vapour stream cleaner, toothpaste,
household and window-cleaning products and natural cleaning
substances like diluted vinegar (20% vinegar / 80% water) are ideal for
cleaning stainless steel.
Steel wool, abrasive, grinding and polishing powder as well as sand
paper should not be used on stainless steel as they can cause the
material to scratch.
8
MIRANIT
STABLE AND ELEGANT
Sanitary equipment made of shatter-proof, resin-bonded mineral granite are exceptionally well suited for
providing a modern and at the same time aesthetic design for sanitary rooms in public environments.
Cast in a single mould without adhesive seams or joints, MIRANIT
products feature the following important characteristics: high
stability, elegant appearance and high durability due to the smooth,
pore-free, hygienic and easy to maintain Gelcoat surface.
These characteristics facilitate the creation of well designed
relatively thin washbasins and multiple washing systems that can
cope with the harshest conditions found in the sanitary facilities of
public and commercial areas.
The name MIRANIT stands for a stable compound consisting of
approximately 80% natural minerals such as marble, sandstone and
quartz sand as well as approximately 20% high quality unsaturated
polyester resin. Quartz is one of the hardest materials and
constitutes a large part of the earth’s crust. The final product is
highly stable in combination with the unsaturated polyester resin and
it has very good forming characteristics to facilitate easy production
into cast moulds. This makes it possible to create products of almost
any shape.
There is an option for any application whether it be single, double
or triple washbasins with a round or square option, children’s
washbasins or bespoke up to a maximum of 3.6 metres with a choice
of bowl shape. We even have a number of different washtroughs in
the range.
3
2
1
4
9
1
MIRANIT– fracture-resistant compound made of natural
minerals and unsaturated polyester resin
2
Hygienic surface, temperature-resistant up to 80°C
3
Smooth, pore-free and high-gloss Gelcoat surface
4
Niche washbasins can be cut to length on-site using a
diamond tipped circular saw
ADVANTAGES COMPARED WITH
CERAMIC SANITARYWARE
Sanitary products manufactured
under the brand name MIRANIT can
be classed under the generic term of
‘cast mineral products’. Compared to
other cast products such as ceramic
sanitaryware, MIRANIT products have
the following advantages:
Higher stability in terms of impact resistance and being shatter-proof.
Clean shapes with good design and the the use of small radii.
A total length of 3.60 m can be achieved for niche washbasins.
Damaged surfaces can be repaired with special repair kits.
MIRANIT
CLEAN & CARE
The Gelcoat surface of MIRANIT is dirt repellent and particularly easy
to care for. In most cases a damp cloth is completely adequate for
cleaning the washbasins.
More serious soiling can be removed with mild, non-scouring
cleaners. This also applies to colour pencil traces, shoe polish, ink,
iodine solution and lipstick. Stains that could result from burning
cigarettes, for example, can be removed with a polishing paste.
For a sustained shine it is recommended to occasionally rub
MIRANIT products with commercially available car polish and then
immediately repolish the treated surfaces.
10
APPLICATIONS
SOLUTIONS FOR ANY COMMERCIAL PROJECT
Leisure
Hotels and Restaurants
Due to its high frequency of usage, all equipment in the public toilets of
leisure facilities is subject to heavy exposure. In order to ensure optimum
hygiene under these conditions, it is necessary to have durable materials
and reliable products. Practical experience has shown that the use of
high-quality, contamination-resistant materials contributes towards
maintaining heavily used sanitary rooms.
The key to top-class washrooms in the hotel lobby and restaurants is
creating an atmosphere of homeliness that welcomes the guest to a return
visit. At the same time, economic efficiency and ease of care are focal
issues. Customised concepts for washing units, aesthetically pleasing
surfaces and high-quality accessories provide optimum sanitary room
facilities that leave a positive memory without neglecting cost of operation.
Security and Police
Military
Safety issues are of prime importance in prisons or police cells. The
impending risk of vandalism, misuse, wilful self-abuse or the concealment
of drugs and weapons can be counteracted with corresponding sanitary
equipment available from Franke Water Systems.
Heavy stress exposure is the daily routine for man and material in
military facilities. Functionality and ruggedness are key issues when
selecting suitable items of equipment for sanitary facilities. Due to their
ruggedness and ease of cleaning, rows of washbasins made of mineral
granite or stainless steel are always on the safe side.
Travel and Transport
Only durable and stable solutions can stand up to heavily frequented
public toilets such as in airports and railway stations. Maximum reliability,
easy care and simple maintenance satisfy both users as well as operators.
Right from the planning stage it is necessary to take into account the
special requirements of these facilities.
Education
The right material surfaces make sanitary products a pleasant roundedoff experience, even for the smallest of us. Franke Water Systems have a
suitable offer for nurseries right the way up to universities.
11
Healthcare and laboratory
Facilities used in hospitals and nursing homes must meet special
requirements. Besides the need for hygiene and ease of use for patients,
possibilities for cleaning and disinfection are of focal importance.
Touch-free fittings and accessories, easy-to-grip mobility aids as well
as easy-care, hygienic surfaces on sanitary items are adapted to the
needs of these facilities. Our product range covers HTM63 and HTM64
standards as well and includes the new Health Building Notes Standards
and includes sinks manufactured from grade 316 stainless steel which
are highly resistant to corrosion and most acids.
Culture
Stadia
The application of aesthetically demanding materials such as mineral
granite and stainless steel for washing units and accessories, combined
with advanced automatic fittings technology, creates a clean and noble
ambience that is also well capable of handling the frequency of visits.
Here at Franke Water systems we have complete packages even for
specific requirements such as the Wudu/ablution washing station and
squat pan.
Whether in recreational or professional sports – participants, as well
as spectators in sports facilities generate heavy water and energy
consumption when using sanitary facilities. Sustainability is thus an
important keyword when planning and operating sporting venues.
Economic and yet comfortable fittings can conserve natural resources
while at the same time ensure a high standard of hygiene whilst helping to
prevent vandalism when accommodating large crowds of visitors.
Offices
Retail stores
With a multitude of washroom materials available for this growing
sector, we have within our portfolio a range of aesthetically pleasing
granite composite washbasins that can be made bespoke to the project
requirements. Not only do they look inviting, but they will stand the test
of time with many commercial benefits. To complement these we have a
growing portfolio of accessories and hand dryers to suit any budget.
The enhancement of the shopping experience with inviting product displays
and clean facilities are key parts of modern retailing. The use of stainless
steel products are ideal for retail applications as they are very durable, easy
to keep clean and maintain their high quality image with the minimum of
maintenance. Special and standard products are available to suit the wide
range of potential applications in this important market sector.
We have specific sector brochures available. Please ask us for your copy.
12
13
SANITARYWARE
SANITARYWARE
Public washrooms in places such as
motorway service stations, railway
stations and sports stadiums require a
high level of protection against vandalism.
This range of WCs, urinals and associated
products is designed to fulfil this
requirement. Stainless steel products
provide durability but with innovative
design. Well-maintained toilets and
washrooms do not just convey a good
image – they demonstrate cleanliness to
visitors, be it in a favourite restaurant,
exhibition centre or place of work.
PRODUCT FEATURES
- Easy to clean, hygienic
- Robust and resistant to vandalism
- Minimum of 1.2mm thick stainless steel used
- Wide range of designs
- Easy to install
- Compatible with wall installation mounting frames
- WC models for disabled access
- Anti-slip floor design used in shower trays and
squat pans
Tel 01246 458900 | www.franke.co.uk
14
SANITARYWARE
WCs
IMAGE
ITEM NUMBER
TYPE/MODEL
SANITARYWARE
Campus 6/4 or 4/2.6 litre flush wall hung P trap WC - Push fit
Campus wall hung WC pan for installation frames, made of stainless
steel, surface satin finished, material thickness 1.6mm, flushing
certificated to EN 997, concealed flushing rim with min. 4 litre flushing
capacity, with a shrouded 100mm diameter horizontal P trap outlet,
pressed seat area tapered towards centre, all edges curved. Mounting
plate and safety screws included. Conforms to EN 33.
CMPX592
CMPX592S
CMPX592B
CMPX592G
CMPX592W
+
Without toilet seat
With seat pads
With black seat and lid
With grey seat and lid
With white seat and lid
Recommended
AQFX0006
With either
AQUA557
AQUA555
Installation frame for WC with cistern
Flushing plate - single flush
Flushing plate - dual flush
Campus 6/4 or 4/2.6 litre flush floor standing P trap WC - Push fit
Campus floor standing WC pan for installation frames, made of stainless
steel, surface satin finished, material thickness 1.6mm, flushing
certificated to EN 997, concealed flushing rim with min. 4 litre flushing
capacity, with a shrouded 100mm diameter horizontal P trap outlet,
pressed seat area tapered towards centre, all edges curved. Mounting
plate and safety screws included. Conforms to EN 33.
CMPX597
CMPX597S
CMPX597B
CMPX597G
CMPX597W
+
Without toilet seat
With seat pads
With black seat and lid
With grey seat and lid
With white seat and lid
Recommended
AQFX0006
With either
AQUA557
AQUA555
Installation frame for WC with cistern
Flushing plate - single flush
Flushing plate - dual flush
We offer a number of different cisterns, see page 22.
15
Tel 01246 458900 | www.franke.co.uk
SANITARYWARE
DISABLED WCs
IMAGE
ITEM NUMBER
TYPE/MODEL
Floor standing disabled WC pan, manufactured from grade 1.4301 (304)
stainless steel - satin polish finish, material thickness of 1.5mm for the
pan and shroud with a stainless steel P trap 102mm o/d, supplied
complete with Multikwik® connector. A flush bend and 90° plastic bend
is provided for the cistern downpipe connection. Rear mounting plate
with 4 no. stainless steel bolts supplied, for mounting onto a duct wall.
The front of the WC is fixed to the floor using a joggle strip. Pipe fixing is
achieved by using the side access panel provided. The WC is supplied
with a white plastic seat and hole for downpipe.
G21743N
G21743NT
+
For surface mounted cistern
For duct fitted cistern
Recommended
AQFX0007
With either
AQUA557
AQUA555
Installation frame for disabled WC with cistern
Flushing plate - single flush
Flushing plate - dual flush
We offer a number of different cisterns, see page 22.
Bariatric WC with heavy duty seat and lid
A specially designed, floor standing WC for bariatric patients, fitted with a
large seat and lid which gives increased support and comfort to the user.
The width of 500 mm provides stability and security for users weighing up
to 381kg (60 stones) and can be installed in hospitals, doctor’s surgeries,
specialist clinics and nursing homes. Can be flushed with a conventional 6
litre duct mounted cistern. Grab rails to aid movement on and off the WC
are also available. Approved to BS EN 997.
G22080N
600x555x400mm
We offer a number of different cisterns, see page 22.
Doc M sanitary pack Concealed
GRBXCBP
Concealed Doc M pack complete with:
Disabled wall hung basin, with touch free tap,
disabled WC with concealed cistern and
down pipe, Blue Doc M grab rail pack
including 1 x drop down rail, 4 x 600mm grab
rails and 1 back rest 250mm deep.
GRBXCWP
Concealed Doc M pack complete with:
Disabled wall hung basin, with touch free tap,
disabled WC with concealed cistern and
down pipe, White Doc M grab rail pack
including 1 x drop down rail, 4 x 600mm grab
rails and 1 back rest 250mm deep.
GRBXCBP
Doc M sanitary pack Exposed
GRBXEWP
Tel 01246 458900 | www.franke.co.uk
GRBXEBP
Exposed Doc M pack complete with:
Disabled wall hung basin, with touch free tap,
disabled WC with exposed cistern and down
pipe, Blue Doc M grab rail pack including 1 x
drop down rail, 4 x 600mm grab rails and 1
back rest 250mm deep.
GRBXEWP
Exposed Doc M pack complete with:
Disabled wall hung basin, with touch free tap,
disabled WC with exposed cistern and down
pipe, White Doc M grab rail pack including 1
x drop down rail, 4 x 600mm grab rails and 1
back rest 250mm deep.
16
SANITARYWARE
Floor standing disabled WC with seat
SANITARYWARE
HEAVY DUTY WCs AND PRISON UNITS
IMAGE
ITEM NUMBER
TYPE/MODEL
SANITARYWARE
Campus 6/4 or 4/2.6 litre flush wall hung P trap WC - Bolt fix
For fitting through a duct wall, manufactured from grade 1.4301 (304)
stainless steel, material thickness 1.5mm for the pan and shroud - satin
polish finish. The WC incorporates a stainless steel P trap 102mm o/d. A
separate mounting plate and 3 bolts are provided for mounting the WC
through a duct wall. The Campus WC has a pressed seating area that
does not require a separate seat in vandal prone installations. However, a
seat and lid can be fitted. Complies with BS EN 997 for 4 litre flushing.
Not suitable for installation frames.
HDTX592
HDTX592B
HDTX592S
Without toilet seat
With black seat and lid
With seat pads
Campus 6/4 or 4/2.6 litre flush floor standing P trap WC - Bolt fix
For fitting through a duct wall, manufactured from grade 1.4301 (304)
stainless steel, material thickness 1.5mm for the pan and shroud - satin
polish finish. The WC incorporates a stainless steel P trap 102mm o/d. A
separate mounting plate and 4 bolts are provided for mounting the WC
through a duct wall. The Campus WC has a pressed seating area that
does not require a separate seat in vandal prone installations. However, a
seat and lid can be fitted. Complies with BS EN 997 for 4 litre flushing.
Not suitable for installation frames.
HDTX597
HDTX597B
HDTX597S
Without toilet seat
With black seat and lid
With seat pads
Also Available...
Home Office recommended model with a unique anti-ligature flushing rim
which through manufacturing methods and design can guarantee a gap
of no more than 1.9mm and can be secured to the floor as well as the
wall of the building.
HDTX599
Universal prison unit
We can manufacture a range of prison units from grade 304 stainless steel satin polish finish. Material thickness 2.0mm, all welded construction.
Suitable for installation with a duct wall ensuring all pipework is concealed.
The WC can be positioned on the right hand side, the left hand side or central
to the unit. A centre water outlet can be provided which needs to be
connected to a pre-mixed water supply. The WC has been approved to BS EN
997 for 6 litre flushing performance.
Other options:
Options available include standard body (390mm) and wide body (500mm),
bolt fix or push fit, manual or electronic water controls, integrated cistern
or direct flushing valve. The units can incorporate an access panel if
required and the basin and WC waste can be connected for a single outlet,
however we can manufacture to your specific reqiurements.
Please ask us for details.
Standard body example
17
Wide body example
Tel 01246 458900 | www.franke.co.uk
SANITARYWARE
SECURITY PRODUCTS, SQUAT PANS AND SHOWER TRAYS
IMAGE
ITEM NUMBER
TYPE/MODEL
Stainless steel unit with transparent top for the manual investigation of
the effluent from a WC. Unit incorporates a stainless steel plate with
holes to drain fluids. Flush hoses supplied. For use in combination with a
WC for installation in Customs, Security and Immigration buildings.
Special sized products can be made to suit site installation and customer
requirements. WC to be ordered separately.
DIU01
620x520x400mm
Communication preventer
Communication preventer for the use in prisons to prevent
communication between prison cells using the WC pipework, for
connection to WC flushing pipes DN100, material PE (weldable), EN 997
approved, EN 476 approved, DIN 1389 approved.
Z- CMPX001
140x140x180mm
Stainless steel squat pan
Squat pan, manufactured from stainless steel, thickness 1.0mm; suitable for
recessed mounting, slip resistant patterned foot areas, no waste kit included.
CMPX502N
CMPX503N
+
With spreader (back inlet)
Without spreader
Required
F3042
High level plastic cistern and 4 piece plastic
downpipe, lever operated
Why not combine with
our WUDU washing
station? See page 76
for details.
Recessed shower trays
Manufactured as a one piece pressing from stainless steel with rounded
internal corners, material thickness 1.0mm, surface satin finish, slip resistant
patterned base and a 38mm BSP grated waste fitting in corner position.
CMPX401/404
CMPX401
CMPX404
800x800x35mm
900x900x35mm
With screw for electric grounding.
+
Required
F2111
Dome grated shower waste and trap
Manufactured as a one piece pressing from stainless steel with raised sides,
rounded internal corners and material thickness of 1.0mm. Surface satin
finish, slip resistant patterned base and a 38mm BSP grated waste fitting in
corner position.
BS400
+
BS400
Required
F2110
+
Flush grated shower waste
Recommended
Z-CMPX400
Tel 01246 458900 | www.franke.co.uk
800x800x88mm
Tamper resistant shower waste fitting for
90mm outlet hole
18
SANITARYWARE
Drugs interceptor unit
SANITARYWARE
URINALS
IMAGE
ITEM NUMBER
TYPE/MODEL
SANITARYWARE
Centinel wall hung urinal
Manufactured from 1.2mm thick grade austenitic stainless steel polished
to a satin polish finish. Each urinal is supplied complete with 50mm
waste, sparge pipes, sparge pipe cover, interconnecting pipework, plastic
cistern and downpipe. The waste outlet is positioned centrally in the
length of the urinal. The recommended height for fixing the cisterns is
750-950mm, from the underside of the cistern to the top return of the
urinal. All urinals are screw fixed to the wall through fixing holes in the
top flange together with separate wall mounted brackets which support
the base of the unit.
With concealed sparge pipe, black plastic cistern and downpipe.
G20117N, G20123N, G20118N & G20119N
G20117N
G20123N
G20118N
G20119N
1200x300x555mm (9 litre cistern)
1500x300x555mm (9 litre cistern)
1800x300x555mm(13.5 litre cistern)
2400x300x555mm (13.5 litre cistern)
With exposed sparge pipe, black plastic cistern and downpipe.
G20120N
G20124N
G20121N
G20122N
F1102
F1103
+
G20120N, G20124N, G20121N & G20122N
1200x300x555mm (9 litre cistern)
1500x300x555mm (9 litre cistern)
1800x300x555mm (13.5 litre cistern)
2400x300x555mm (13.5 litre cistern)
Recommended
F1102
F1103
Infra-red urinal flush control battery operated
Infra-red urinal flush control mains operated
Campus urinal pod
Single urinal for wall mounting, made of stainless steel, surface satin finish,
material thickness 1.2mm, oval bowl, stainless steel spreader ½", hidden
horizontal outlet towards wall, mounting and fixing conform to EN80,
hidden screws and includes trap, mounting bracket and domed waste.
Push fit
CMPX538CD
CMPX
CMPX538P
Urinal pod for duct mounted cistern and
waste pipework
Urinal pod for electronic flushing
Bolt fixed
HDTX538P
+
F1102
F1103
HDTX
313x342x734mm
Product can be foam filled, on request, for
extra strength and reduction of noise in a
security environment.
Recommended
F1102
F1103
CMPX136
CMPX560
AQRE432
Infra-red urinal flush control battery operated
Infra-red urinal flush control mains operated
Installation frame for for push fit urinal
Urinal divider
Infra red urinal flush valve for mains operation
Heavy duty urinals also available - please ask for details
Urinal flush controls
Urinal controller system detects when the facility has been used, allows
the cistern to fill which then flushes the urinal in the normal way.
F1102
F1103
+
Spares
F1104
19
Infra red urinal control (battery operated)
Infra red urinal control (mains operated)
Spare battery for infra red urinal control
Tel 01246 458900 | www.franke.co.uk
SANITARYWARE
WATERFREE URINALS
IMAGE
ITEM NUMBER
TYPE/MODEL
Single water-free urinal for wall mounting, manufactured from 1.2mm thick
stainless steel polished to a satin finish, oval bowl, hidden horizontal outlet
towards wall, mounting and fixing conform to EN80, hidden screws, includes
90° elbow with 50mm diameter, mounting bracket and stainless steel waste
and membrane as trap.
CMPX538WFP
+
Recommended
CMPX137
CMPX560
+
313x342x733mm
Installation frame for waterfree urinal pod
Urinal divider
Spares
E-CMPX531
Water free membrane
Water-free urinal pod - Bolt fixed
Single water-free urinal for wall mounting, manufactured from 1.2mm thick
stainless steel polished to a satin finish, oval bowl, hidden horizontal outlet
towards wall, mounting and fixing conform to EN80, hidden screws, includes
90° elbow with 50mm diameter, includes mounting bracket and stainless
steel waste and membrane as trap. Product can be foam filled, on request, for
extra strength and reduction of noise in a security environment.
HDTX538WFP
+
313x342x733mm
Recommended
CMPX560
Urinal divider
Water-free urinal
A design of urinal trough, purpose made to maximise the flow to the
waterless waste fitting and reduce standing fluids ensuring that the product
is clean and odour free. Fitted with the unique waterless waste diaphragm,
urinal troughs are ideal for locations such as stadiums, pubs, nightclubs,
public toilets and factories where there is a high frequency of use.
The waterless waste fitting is based on a simple principle of a silicone
diaphragm that allows urine to pass through the fitting but stops odours
entering back into the washroom. The urinal does not need any liquids,
gels, scented pads or components to be replaced on a monthly basis for
the product to continue to work. The silicone diaphragm insert needs to be
replaced at least twice a year, depending upon usage. The urinal trough is
made from 1.5mm grade 304 stainless steel and is secured with wall brackets
and top edge fixings. The plastic waste fitting is 38mm without the need for a
conventional bottle trap.
L or R after the code refers to the handing of the waste outlet
when facing the unit.
G20125L/R
G20126L/R
1200x300x578mm
1800x300x578mm
How it works
The waste systems used in our stainless steel
water-free urinals contain a silicone
diaphragm that allows urine to pass through
the waste, then creates a seal to stop odours
entering the washroom.
+
Spares
F2000
F1106
F1108
Waterless waste insert and fragrance ring
Adaptor
Service key
The cartridge containing the silicone
membrane is locked in to the waste using the
maintenance key, the cartridge will only
require changing twice a year even in the most
heavily used washrooms.
Tel 01246 458900 | www.franke.co.uk
20
SANITARYWARE
Water-free urinal pod - Push fit
SANITARYWARE
GRP WATERFREE URINALS
IMAGE
ITEM NUMBER
TYPE/MODEL
SANITARYWARE
Cadet glass fibre reinforced plastic (GRP) waterfree urinal
Glass fibre reinforced plastic is more resilient than ceramic, benefits
from a long life cycle and provides a high level of security against
vandalism. The centrepiece of the water-free urinals is the odour trap:
This odour trap works with the aid of a special blocking fluid. The
blocking fluid needs replacing after approximately 5000-7500 uses.
Urinal supplied complete with mounting brackets, maintenance tools, 300ml
Urilock and a Uricloth.
GFPX100W
+
Cadet urinal pod horizontal outlet White*
Spares
ZGFPX001
ZGFPX002
ZGFPX003
ZGFPX004
ZGFPX005
Uridan Urilock Refill for Waterless Urinals 300ml
Uridan Urilock Refill for Waterless Urinals 5 litre
Uridan Uriclean 500ml
Uridan Uriclean 5 litre
Uridan Uricloth 50 pieces
*Other colours and options
available on request.
Crew glass fibre reinforced plastic (GRP) waterfree urinal
The Crew trough is ideally suited for places where large numbers of
people congregate. The Crew is available in three different lengths (1200,
1800 and 2400mm) and helps to ensure that both the waiting times in
toilet queues are kept to a minimum during busy periods and that the
water costs are reduced. Glass fibre reinforced plastic is more resilient
than ceramic, benefits from a long life cycle and provides a high level of
security against vandalism. The centrepiece of the water-free urinals is
the odour trap: This odour trap works with the aid of a special blocking
fluid. The blocking fluid needs replacing after approximately 1500020000 uses. Urinal supplied complete with mounting brackets, maintenance
tools, 300ml Urilock and a Uricloth.
GFPX120G
GFPX180G
GFPX240G
+
*Other colours and options
available on request.
Crew urinal 1200mm trough Granite*
Crew urinal 1800mm trough Granite*
Crew urinal 2400mm trough Granite*
Spares
ZGFPX001
ZGFPX002
ZGFPX003
ZGFPX004
ZGFPX005
Uridan Urilock Refill for Waterless Urinals 300ml
Uridan Urilock Refill for Waterless Urinals 5 litre
Uridan Uriclean 500ml
Uridan Uriclean 5 litre
Uridan Uricloth 50 pieces
How it works
The waterless Uridan® urinals are more hygienic than conventional flushing
systems. The centrepiece of the Uridan® urinals is the odour trap: This
odour trap works with the aid of Urilock®, a special blocking fluid. Urilock®
consists of plant-based substances and is biodegradable. The heavier urine
flows directly down the drain, whilst the lighter Urilock® stays on the
surface and blocks out odours. Just one Uridan® urinal saves up to
200,000 litres of water per year.
21
Tel 01246 458900 | www.franke.co.uk
SANITARYWARE
CISTERNS
IMAGE
ITEM NUMBER
TYPE/MODEL
A concealed, mounted cistern that can be used with stainless steel and
ceramic WCs for security and public toilets installations.
F3038
+
420x150x300mm
Recommended
F3036
F3035
Heavy duty push button, single flush, to suit
150mm thick walls
to suit 42mm thick panels
Stainless steel cisterns
Disabled WC cistern
The disabled WC cistern incorporates a moulded black plastic inner
cistern together with an outer stainless steel casing. The casing is
manufactured from grade 1.4301 (304), 0.9mm thick stainless steel satin polish finish. Supplied complete with 13mm plastic inlet valve and
38mm BSP brass outlet. No overflow pipe is necessary as the cistern
incorporates an automatic internal overflow system. Adjustable to give
either a 6, 7 or 9 litre flush.
Note: The cistern is supplied assembled ready for connection
on site. Fixing height of cistern - minimum 750mm from floor
to underside of cistern.
G20604N
Disabled WC with spatulate lever
537x197x303mm
Urinal cisterns
G20606N
G20607N
G20608N
4.5 litre for 1 pod urinal 537x197x303mm
9 litre for 2 pod urinals 537x197x303mm
13.5 litre for 3 pod urinals 537x197x303mm
Plastic automatic cistern
F3019
F3020
F3022
4.5 litre for 1 pod urinal 508x297x181mm
9 litre for 2 pod urinals 508x297x181mm
13.5 litre for 3 pod urinals 508x297x181mm
Plastic cistern for duct wall mounting for WCs and hospital units
The duct mounting slimline cistern is manufactured from a high-impact
Polystyrene, front, left or right hand side flushing, supplied complete with
plastic waste, syphon, ball valve, float, overflow, plastic downpipe and
extended lever for mounting through the duct wall.
F3017
F3018
6 litre - White
9 litre - Black
Downpipes also available - please ask for details.
Tel 01246 458900 | www.franke.co.uk
22
SANITARYWARE
Single flush 6 litre concealed cistern
SANITARYWARE
GRAB RAILS
IMAGE
ITEM NUMBER
TYPE/MODEL
SANITARYWARE
Stainless steel straight grab rail
Manufactured from grade 1.4301 (304) stainless steel with a matte finish
to prevent slipping, with an ergonomical, comfortable diameter of about
32mm. Stainless steel cover plates conceal screw fixing.
CNTX300N
CNTX450N
CNTX600N
Contina stainless steel grab rail 300x95mm
Contina stainless steel grab rail 450x95mm
Contina stainless steel grab rail 600x95mm
Stainless steel drop down grab rail
Manufactured from grade 1.4301 (304) stainless steel with a matte finish
to prevent slipping, with an ergonomical, comfortable diameter of about
32mm. Stainless steel cover plates conceal screw fixing.
CNTX73B
Contina stainless steel fold down grab rail
100x850x250mm
Set of DOC M grab rails
Contains:
F7261
3 x stainless steel grab rails 600mm
1 x stainless steel backrest rail
1 x stainless steel drop down rail 760mm
Single grab rail
Manufactured from epoxy coated aluminium.
GRBX301W
GRBX301B
GRBX401W
GRBX401B
GRBX101W
GRBX101B
White grab rail 300mm
Blue grab rail 300mm
White grab rail 450mm
Blue grab rail 450mm
White grab rail 600mm
Blue grab rail 600mm
Drop down grab rail
Manufactured from epoxy coated stainless steel 760mm.
GRBX201W
GRBX201B
White grab rail
Blue grab rail
Lift up shower seat
Manufactured from epoxy coated aluminium and stainless steel.
GRBX501W
GRBX501B
GRBX601W
GRBX601B
Lift up shower seat white
Lift up shower seat blue
Lift up shower seat with legs white
Lift up shower seat with legs blue
Backrest
Manufactured from epoxy coated aluminium and stainless steel.
GRBX701W
GRBX701B
GRBX801W
GRBX801B
23
White backrest 125mm
Blue backrest 125mm
White backrest 250mm
Blue backrest 250mm
Tel 01246 458900 | www.franke.co.uk
SANITARYWARE
DOC M PACKS
ITEM NUMBER
TYPE/MODEL
Doc M ambulant basic WC pack (3 items)
Manufactured from epoxy coated aluminium. 3 x straight grab rails 600mm.
GRBX103WP
GRBX103BP
White
Blue
Doc M basic WC pack (5 items)
Manufactured from epoxy coated aluminium and stainless steel.
1 x drop down grab rail, 4 x straight grab rails 600mm.
GRBX105WP
GRBX105BP
White
Blue
Doc M basic WC pack with backrest (6 items)
Manufactured from epoxy coated aluminium and stainless steel.
1 x drop down grab rail 760mm, 4 x grab rails 600mm, 1 x backrest
125mm depth.
GRBX106WP
GRBX106BP
White
Blue
1 x drop down grab rail 760mm, 4 x grab rails 600mm, 1 x backrest
250mm depth.
GRBX206WP
GRBX206BP
White
Blue
Doc M basic shower pack with backrest (7 items)
Manufactured from epoxy coated aluminium and stainless steel.
2 x drop down grab rails 760mm, 3 x grab rails 600mm, 1 x backrest, lift
up shower seat.
With 125mm depth backrest
GRBX107WP
GRBX107BP
White
Blue
2 x drop down grab rails 760mm, 3 x grab rails 600mm, 1 x backrest
250mm depth, lift up shower seat with legs.
With 250mm depth backrest and shower seat with legs
GRBX207WP
GRBX207BP
White
Blue
Lift up shower seat shown
without leg option
Tel 01246 458900 | www.franke.co.uk
24
SANITARYWARE
IMAGE
25
ACCESSORIES AND
HAND DRYERS
ACCESSORIES AND
HAND DRYERS
RODAN ACCESSORIES
Rodan is the range with elegant simple design lines. Easy to install
and maintain, Rodan offers the best combination of value and
function for a complete range of washroom accessories.
STRATOS ACCESSORIES
Stratos offers a style of product that is suitable for all
environments. With the distinctive curved front cover design and
the unique InoxPlus anti-fingerprint coating, Stratos products are
for all washrooms where appearance and hygiene are important
factors.
XINOX® ACCESSORIES
Xinox accessories are the ultimate in high design and style. The
award winning products have distinctive features and designs that
make them stand out in high specification washrooms. All products
have the unique InoxPlus anti-fingerprint coating.
HAND DRYERS
Outside of the hand dryers belonging to our Rodan, Stratos and
Xinox portfolio, we have a range suitable for any project. From
a small budget dryer right up to our new innovative and energy
efficient high speed hand dryers with air curtain technology.
Available in a ‘hands in’ version and ‘hands under’ version they
will give a modern and sophisticated look to any commercial
washroom.
HEAVY DUTY ACCESSORIES
Our comprehensive range of heavy duty accessories are made from
2mm thick stainless steel and are ideal where vandalism is a high risk
such as in public toilets and motorway rest areas, prisons and police
stations.
Tel 01246 458900 | www.franke.co.uk
26
RODAN
The Rodan range offers functional,
high-quality, hygienic products which
provides an ideal solution when designing
washrooms.
EXPERIENCE THE ADVANTAGES
The timeless design of RODAN stainless steel fixtures with their angular
side profiles lends itself to the contemporary decor of heavily frequented
washrooms and restrooms.
1
5
1 Straight lines and 90° angle
2 0.8mm thick grade 304
stainless steel
3
3 Cylinder lock with Franke
standard key
27
4
4 Includes separate soap tank
2
5 Universal drill holes for easy
refurbishment
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
RODAN WALL MOUNTED
ITEM NUMBER
TYPE/MODEL
Rodan soap dispenser for wall mounting for liquid soap
Soap dispenser for wall mounting, stainless steel, surface satin finish,
material thickness 0.8mm, flat front cover, cylinder lock with Franke
standard key, suitable for liquid soaps and lotions, 1 litre soap tank, push
button on front, includes stainless steel screws and dowels.
RODX619
+
200x85x132mm
Recommended
SO1L
SO10L
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Tall Rodan soap dispenser for wall mounting for liquid soap
Soap dispenser for wall mounting, stainless steel, surface satin finish,
material thickness 0.8mm, flat front cover, cylinder lock with Franke
standard key, suitable for liquid soaps and lotions, 0.8 litre soap tank,
plastic dispensing handle, includes stainless steel screws and dowels.
RODX618
+
116x143x321mm
Recommended
SO1L
SO10L
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Tall Rodan soap dispenser for wall mounting for foam soap
Foam soap dispenser for wall mounting, stainless steel, surface satin finish,
material thickness 0.8mm, cylinder lock with Franke standard key, inspection
windows on sides, suitable for foam soap (not included in scope of delivery),
stainless steel pull lever, includes stainless steel screws and dowels.
RODX616
+
116x135x326mm
Recommended
E-XINX616
Foam soap, 650ml - minimum order quantity
9 bottles
Soap dispenser for wall mounting
Soap dispenser for wall mounting and re-filling from service room behind
the wall, high polished chromated brass, requires 18mm drilling hole, 3/8”
thread, spout not movable, suitable for liquid soaps and lotions, without
soap tank (can be directly connected to soap can).
SD110
Soap dispenser for table top mounting
Soap dispenser for table top mounting, high polished chromated brass,
requires 22mm drilling hole, 1/2” thread, spout not movable, spout length
140 mm, suitable for liquid soaps and lotions with a 1 litre soap tank with
membrane for pressure balance, filled from above.
SD80
Tel 01246 458900 | www.franke.co.uk
SD80
28
ACCESSORIES AND
HAND DRYERS
IMAGE
ACCESSORIES AND HAND DRYERS
RODAN WALL MOUNTED
ACCESSORIES AND
HAND DRYERS
IMAGE
ITEM NUMBER
TYPE/MODEL
Rodan paper towel dispenser for wall mounting
Paper towel dispenser for wall mounting, stainless steel, surface satin
finish, material thickness 0.8mm, flat front cover, cylinder lock with
Franke standard key, inspection windows on sides, loading capacity
500-800 paper towels depending on brand and folding, includes
stainless steel screws and dowels.
RODX600
+
275x112x355mm
Recommended
FH68
Paper towels (168 per pack) minimum order
quantity 20 packs
Rodan double toilet roll holder with spindle system for wall mounting
Double toilet roll holder with spindle system for wall mounting, stainless
steel, surface satin finish, material thickness 0.8mm, flat front cover,
cylinder lock with Franke standard key, for 2 rolls with maximum
diameter of 120mm, second roll will be released after consumption of
first roll, reserve roll not visible, includes stainless steel screws and
dowels.
RODX672
144x138x301mm
Single toilet roll holder with cover for wall mounting
Toilet roll holder with lid made of 0.9mm thick stainless steel; satin finish.
The dispenser takes one roll with a maximum diameter of 130mm.
Screws and dowels are included.
BS677
145x25x130mm
Jumbo toilet roll holder for wall mounting
Jumbo toilet roll holder for wall mounting, made of stainless steel,
material thickness 0.9mm, surface satin finish, for 1 large roll with
maximum diameter of 350mm. Allen key lock, inclusive screws and
dowels.
CHRX670
∅369x108mm
Rodan hygiene bag dispenser for wall mounting
Hygiene bag dispenser for wall mounting, stainless steel, surface satin
finish, material thickness 0.8mm, edges not welded, inboard lug to hold
package, withdrawal from front, includes premounted double side
self-adhesive tape and stainless steel screws and dowels.
RODX191
29
91x21x150mm (WxHxD)
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
RODAN WALL MOUNTED
ITEM NUMBER
TYPE/MODEL
Rodan sanitary towel disposal and waste bin for wall mounting
Sanitary towel disposal and waste bin for wall mounting, stainless steel,
surface satin finish, material thickness 0.8mm, flat front cover,
approximately. 3.7 litre capacity, removable plastic container inside,
includes stainless steel screws and dowels.
RODX611
200x165x295mm
Rodan sanitary towel disposal and waste bin with flap for wall
mounting
Sanitary towel disposal and waste bin for wall mounting, stainless steel,
surface satin finish, material thickness 0.8 mm, approx. 6 litre capacity,
with integrated bag holder, self closing lid, with integrated storage for
paper hygiene bags. Can be combined with RODX191 hygiene bag
dispenser for plastic bags, cylinder lock with Franke standard key,
includes stainless steel screws and dowels.
RODX612
350x130x469mm
Rodan waste bin with flap for wall mounting
Waste bin for wall mounting, stainless steel, surface satin finish, material
thickness 0.8mm, folding self closing lid, with integrated bag holder, door
with Franke standard lock and key, includes stainless steel screws and
dowels.
RODX604
RODX606
capacity: approx. 16 litres
capacity: approx. 45 litres
RODX606
Rodan open waste bin for wall mounting
Waste bin for wall mounting, stainless steel, surface satin finish, material
thickness 0.8mm, rounded edges, mounting either with mounting bracket
or directly onto the wall, includes stainless steel screws and dowels.
RODX605S
RODX605
RODX607
RODX605
+
capacity: approx. 18 litres
capacity: approx. 23 litres
capacity: approx. 60 litres
Recommended
E-RODX605
E-RODX607
RODX608
Bag holder for RODX605
Bag holder for RODX607
Folding self closing lid for RODX607
Rodan waste bin for wall mounting
Waste bin for wall mounting, stainless steel, surface satin finished,
material thickness 0.8mm, self closing lid, folding bag holder, cylinder
lock with Franke standard key, includes stainless steel screws and
dowels
RODX605SL
Tel 01246 458900 | www.franke.co.uk
capacity: approx. 30 litres
30
ACCESSORIES AND
HAND DRYERS
IMAGE
ACCESSORIES AND HAND DRYERS
RODAN WALL MOUNTED
ACCESSORIES AND
HAND DRYERS
IMAGE
ITEM NUMBER
TYPE/MODEL
Rodan toilet brush holder for wall mounting
Toilet brush holder for wall mounting, stainless steel, surface satin finish,
material thickness 0.8mm, flat front, closed cover to the front, lasered
opening for brush, white nylon brush with flushing rim cleaner, withdrawal
opening either left or right, depending on mounting, removable plastic
drip tray, includes stainless steel screws and dowels.
RODX687
110x111x230mm
Rodan combination paper towel and soap dispenser for wall mounting
Paper towel and soap dispenser combination for wall mounting, stainless
steel, surface satin finish, material thickness 0.8 mm, cylinder lock with
Franke standard key, inspection windows on sides, paper towel dispenser
with loading capacity 300 - 400 pcs. of paper depending on brand and
folding, suitable for liquid soaps and lotions, 0.8 litre soap tank, pull
lever, includes stainless steel screws and dowels.
RODX601
+
358x134x325mm
Recommended
FH68
SO1L
SO10L
Paper towels (168 per pack) minimum order
quantity 20 packs
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Rodan combination paper towel dispenser and waste bin for wall
mounting
Combination paper towel dispenser and waste bin for wall mounting,
stainless steel, surface satin finish, material thickness 0.8mm, flat front
cover, cylinder lock with Franke standard key, loading capacity 500-800
paper towels depending on brand and folding, waste bin with approximately.
23 litre capacity, includes stainless steel screws and dowels.
RODX602
+
411x171x1148mm
Recommended
FH68
Paper towels (168 per pack) minimum order
quantity 20 packs
Rodan combination paper towel, soap dispenser, waste bin for wall
mounting
Waste bin, paper towel, soap dispenser combination for wall mounting,
stainless steel, surface satin finish, material thickness 0.8 mm, cylinder
lock with Franke standard key, paper towel dispenser with loading capacity
300 - 400 pcs. of paper depending on brand and folding, suitable for liquid
soaps and lotions, 0.8 litre soap tank, push lever, waste bin with approx. 23
litre capacity, includes stainless steel screws and dowels.
RODX617
+
Recommended
FH68
SO1L
SO10L
31
413x173x1148mm
Paper towels (168 per pack) minimum order
quantity 20 packs
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
RODAN RECESSED
ITEM NUMBER
TYPE/MODEL
ACCESSORIES AND
HAND DRYERS
IMAGE
Rodan soap dispenser for recessed mounting for liquid soap
Soap dispenser for recessed mounting, stainless steel, surface satin
finish, material thickness 0.8mm, flat front cover, cylinder lock with
Franke standard key, suitable for liquid soaps and lotions, 1 litre soap
tank, push button on front, includes stainless steel screws and dowels.
RODX619E
+
241x86x243mm
Recommended
SO1L
SO10L
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Tall Rodan soap dispenser for recessed mounting for liquid soap
Soap dispenser for recessed mounting, stainless steel, surface satin finish,
material thickness 0.8mm, flat front cover, cylinder lock with Franke standard
key, suitable for liquid soaps and lotions, 0.8 litre soap tank, plastic
dispensing handle, includes stainless steel screws and dowels.
RODX618E 154x143x463mm
+
Recommended
SO1L
SO10L
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Rodan paper towel dispenser for recessed mounting
Paper towel dispenser for recessed mounting, stainless steel, surface satin
finish, material thickness 0.8mm, flat front cover, cylinder lock with Franke
standard key, loading capacity 500-800 paper towels depending on brand
and folding, includes stainless steel screws and dowels.
RODX600E
+
324x112x513mm
Recommended
FH68
Paper towels (168 per pack) minimum order
quantity 20 packs
Rodan paper towel dispenser for hidden mounting
Paper towel dispenser for hidden mounting behind wall and mirror,
stainless steel, surface satin finish, material thickness 0.8mm, capacity
for 600 C-fold or 800 multi-fold paper towels, filling from the bottom,
includes stainless steel screws and dowels.
RODX600ME
Tel 01246 458900 | www.franke.co.uk
342x113x464mm
32
ACCESSORIES AND HAND DRYERS
RODAN RECESSED
ACCESSORIES AND
HAND DRYERS
IMAGE
ITEM NUMBER
TYPE/MODEL
Rodan paper towel dispenser for worktops
Paper towel dispenser for installation from the front or from the top,
stainless steel, surface satin finish, material thickness 1mm, capacity for
600 pieces of C-folded single-layer paper towels. Can be filled from the top.
RODX600TT
+
330x180x445mm
Recommended
FH68
Paper towels (168 per pack) minimum order
quantity 20 packs
Waste disposal barrel
Waste disposal barrel for installation in a worktop or a miranit washbasin,
chromium-nickel steel, visible surfaces satin finish, with raised edge,
opening with 130 mm inner diameter, without waste container.
E-BS602E
150x120mm
Rodan waste flap
Waste disposal flap for table top installation, stainless steel, visible
surfaces satin finish, material thickness 0.8 mm, self-closing disposal
flap, without waste container.
RODX605TT
330x53x195mm
Rodan waste chute
Waste chute for table top installation, stainless steel, visible surfaces
satin finish, material thickness 0.8 mm, without waste container.
RODX607TT
33
175x175x121mm
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
RODAN RECESSED
ITEM NUMBER
TYPE/MODEL
ACCESSORIES AND
HAND DRYERS
IMAGE
Rodan double toilet roll holder with spindle system for recessed
mounting
Double toilet roll holder with spindle system for recessed mounting,
stainless steel, surface satin finish, material thickness 0.8mm, flat front
cover, cylinder lock with Franke standard key, for 2 rolls with maximum
diameter of 120mm, second roll will be released after consumption of
first roll, reserve roll not visible, includes stainless steel screws and
dowels.
RODX672E
184x138x341mm
Rodan waste bin for half recessed mounting
Waste bin for recessed mounting, stainless steel, surface satin finish,
material thickness 0.8mm, rounded edges, cylinder lock with Franke
standard key, approximately. 23 litre capacity, mounting with in-wall
frame, includes stainless steel screws and dowels.
RODX605E
+
408x169x690mm
23 litre capacity, half recessed version
Recommended
E-RODX605
Bag holder
Rodan waste bin for full recessed mounting
Waste bin for recessed mounting, stainless steel, surface satin finish,
material thickness 0.8 mm, rounded edges, cylinder lock with Franke
standard key, mounting with in-wall frame, includes stainless steel
screws and dowels.
RODX605EE
410x170x690mm
23 litre capacity, full recessed version
Rodan waste bin with flap for recessed mounting
Waste bin for recessed mounting, stainless steel, surface satin finish,
material thickness 0.8 mm, with integrated bag holder, door with Franke
standard lock and key, includes stainless steel screws and dowels.
RODX604E
RODX606E
capacity: approx. 16 litres
capacity: approx. 45 litres
RODX606E
Rodan sanitary towel disposal bin for recessed mounting
Sanitary towel disposal bin for recessed mounting, stainless steel,
surface satin finish, material thickness 0.8 mm, approx. 6 litre capacity,
with integrated bag holder, self closing lid, with integrated storage for
paper hygiene bags, cylinder lock with Franke standard key, includes
stainless steel screws and dowels.
RODX612E
Tel 01246 458900 | www.franke.co.uk
401x116x659mm
34
ACCESSORIES AND HAND DRYERS
RODAN RECESSED
ACCESSORIES AND
HAND DRYERS
IMAGE
ITEM NUMBER
TYPE/MODEL
Rodan combination paper towel dispenser and waste bin for
recessed mounting
Combination paper towel dispenser and waste bin for recessed
mounting, stainless steel, surface satin finish, material thickness 0.8mm,
flat front cover, cylinder lock with Franke standard key, loading capacity
500-800 paper towels depending on brand and folding, waste bin with
approximately 23 litre capacity, includes stainless steel screws and
dowels.
RODX602E
+
408x169x1145mm
Recommended
FH68
Paper towels (168 per pack) minimum order
quantity 20 packs
Rodan combination paper towel dispenser, soap dispenser and
waste bin for recessed mounting
Waste bin, paper towel, soap dispenser combination for recessed
mounting, stainless steel, surface satin finish, material thickness
0.8mm, cylinder lock with Franke standard key, paper towel dispenser
with loading capacity 300 - 400 pcs. of paper depending on brand and
folding, suitable for liquid soaps and lotions, 0.8 litre soap tank, push
lever, waste bin with approximately 23 litre capacity, includes stainless
steel screws and dowels.
RODX617E
+
Recommended
FH68
SO1L
SO10L
35
408x169x1145mm
Paper towels (168 per pack) minimum order
quantity 20 packs
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
RODAN TOUCH FREE
ITEM NUMBER
TYPE/MODEL
Tall Rodan touch-free soap and disinfectant dispenser for wall
mounting (battery operated)
Battery operated, touch-free soap and disinfectant dispenser for wall
mounting, stainless steel, surface satin finish, material thickness 0.8mm,
flat front cover, cylinder lock with Franke standard key, infra-red sensor
for non-touch operation, LED indicates low-battery status, uses 6x1.5V
(=9V) AA alkaline batteries, suitable for liquid soaps, lotions, antiseptic
soaps and disinfectants, 0.8-litre soap tank, dispenses 0.6 to 1.1ml
depending on soap, includes stainless steel screws and dowels.
RODX625
+
120x107x296mm
Recommended
SO1L
SO10L
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Rodan touch-free paper towel dispenser for wall mounting (battery
operated)
Battery operated, touch-free paper towel dispenser for wall mounting,
stainless steel, surface satin finish, material thickness 0.8mm, flat cover
with cylinder lock and standard Franke key, infra-red sensor for
non-touch operation, integrated tear-off edge, needs 4 x standard 1.5V
batteries, maintenance-free mechanism and easy paper roll change, for
rolls with maximum width 210mm and maximum diameter 220mm, paper
length adjustable to 200, 250 and 300mm, includes stainless steel
screws and dowels.
RODX630
290x224x390mm
Rodan touch-free stainless steel hand dryer
Touch-free warm air hand dryer for wall mounting, stainless steel,
surface satin finish, material thickness 1.2mm, infra-red sensor for
non-touch operation, sensor range adjustable from 10 to 30cm, cable
and plug not included.
- Connection voltage: 230V, 50Hz
- Total power: 2200W
- Heater: 2100W
- Motor: 100W motor with 2850 rpm
- Air volume: 274m³/h
- Air velocity: 15.5m/s
RODX310
Tel 01246 458900 | www.franke.co.uk
314x163x215mm
36
ACCESSORIES AND
HAND DRYERS
IMAGE
ACCESSORIES AND HAND DRYERS
ACCESSORIES AND
HAND DRYERS
IMAGE
STRATOS
Clarity, elegance and harmony are the factors
that characterise today’s approach to design.
There is a growing feeling that even facilities
for daily use should offer looks that measure
up to their advanced functionality.
1 Distinctive curved front cover design
2
3
2 1.5mm thick grade 304 stainless steel
6
3 Cylinder lock with Franke standard key
1
4 Includes separate soap tank
5
5 Inspection window on front
4
6 Front of unit with surface refinement Inox Plus
for the reduction of fingerprints.
This is manufactured with the unit and
not applied after.
InoxPlus® surface treatment
Microscopic particles mesh with the molecules of the material surface
to even out the imperfections that are invisible to the naked eye. The fine
structure that results makes fingerprints virtually invisible.
37
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
STRATOS WALL MOUNTED
ITEM NUMBER
TYPE/MODEL
Stratos soap dispenser for wall mounting for liquid soap
Soap dispenser for wall mounting, stainless steel, surface satin finish,
front with InoxPlus® surface refinement which reduces fingerprints and
makes it easier to clean, material thickness 1.5mm, curved front cover,
cylinder lock with Franke standard key, inspection window on front,
suitable for liquid soaps and lotions, 1 litre soap tank, push button on
front, includes stainless steel screws and dowels.
STRX619
+
186x92x154mm
Recommended
SO1L
SO10L
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Tall Stratos soap dispenser for wall mounting for liquid soap
Soap dispenser for wall mounting, stainless steel, surface satin finish, front
with InoxPlus® surface refinement which reduces fingerprints and makes it
easier to clean, material thickness 1.5mm, curved front cover, cylinder lock
with Franke standard key, inspection window on front, suitable for liquid
soaps and lotions, 0.8 litre soap tank, plastic dispensing handle, includes
stainless steel screws and dowels.
STRX618
+
100x134x304mm
Recommended
SO1L
SO10L
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Tall Stratos soap dispenser for wall mounting for foam soap
Foam soap dispenser for wall mounting, stainless steel, surface satin
finish, front with InoxPlus surface refinement which reduces fingerprints
and makes it easier to clean, material thickness 1.5 mm, curved front
cover, cylinder lock with Franke standard key, inspection window on
front, suitable for foam soap, stainless steel pull lever, includes stainless
steel screws and dowels.
STRX616
+
Recommended
E-XINX616
Tel 01246 458900 | www.franke.co.uk
112x134x305mm
Foam soap, 650ml - minimum order quantity
9 bottles
38
ACCESSORIES AND
HAND DRYERS
IMAGE
ACCESSORIES AND HAND DRYERS
STRATOS WALL MOUNTED
ACCESSORIES AND
HAND DRYERS
IMAGE
ITEM NUMBER
TYPE/MODEL
Stratos paper towel dispenser for wall mounting
Paper towel dispenser for wall mounting, stainless steel, surface satin
finish, front with InoxPlus® surface refinement which reduces
fingerprints and makes it easier to clean, material thickness 1.5mm,
curved front cover, inspection window, cylinder lock with Franke standard
key, loading capacity 300-400 Z-fold towels, includes stainless steel
screws and dowels.
STRX600
+
300x134x305mm
Recommended
FH68
Paper towels (168 per pack) minimum order
quantity 20 packs
Stratos paper towel dispenser with centre feed for wall mounting
Centre-feed paper roll box for wall mounting, stainless steel, surface
satin finish, front with InoxPlus® surface refinement which reduces
fingerprints and makes it easier to clean, material thickness 1.5mm,
curved front cover, cylinder lock with Franke standard key, for paper rolls
with maximum diameter of 190mm and maximum height of 250mm, only
for centre-feed paper rolls, integrated tear-off edge, includes stainless
steel screws and dowels.
STRX635
205x240x305mm
Stratos paper towel dispenser for wall mounting
Maunal paper towel dispenser for wall mounting, stainless steel, surface
satin finish, front with InoxPlus® surface refinement which reduces
fingerprints and makes it easier to clean, material thickness 1.5mm,
curved front with inspection window, cylinder lock with Franke standard
key, capacity 1 paper roll, paper comes out automatically to pull with
hand, maintenance free, electrical connection or batteries are not
required, easy paper roll change mechanism, for rolls with maximum
width 205mm and maximum diameter 200mm. Paper length is not
adjustable - one length 260mm, includes stainless steel screws and
dowels.
STRX637
294x227x385mm
Stratos double toilet roll holder with spindle system for wall
mounting
Double toilet roll holder for wall mounting, stainless steel, surface satin
finish, front with InoxPlus® surface refinement which reduces
fingerprints and makes it easier to clean, material thickness 1.5mm,
curved front cover, closed housing, cylinder lock with Franke standard
key, for two rolls up to maximum diameter of 120mm, second roll will be
released after consumption of first roll, second roll not visible, with
spindle system, includes stainless steel screws and dowels.
STRX672 156x141x303mm
39
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
STRATOS WALL MOUNTED
ITEM NUMBER
TYPE/MODEL
Stratos double toilet roll holder without spindle system for wall
mounting
Double toilet roll holder for wall mounting, stainless steel, surface satin
finish, front with InoxPlus® surface refinement which reduces
fingerprints and makes it easier to clean, material thickness 1.5mm,
curved front cover, closed housing with inspection window on front,
cylinder lock with Franke standard key, for two rolls up to maximum
diameter of 140mm, second roll falls when clip is folded up into dispense
position, without spindle system, includes stainless steel screws and
dowels.
STRX671L
170x166x343mm
Stratos jumbo toilet roll holder for wall mounting
Jumbo toilet roll holder for wall mounting, stainless steel, surface satin
finish, front with InoxPlus® surface refinement which reduces
fingerprints and makes it easier to clean, material thickness 1.5mm,
curved front cover, closed housing with inspection window, paper
dispensing with two serrated tear-off edges, cylinder lock with Franke
standard key, for one jumbo roll with maximum diameter of 295mm,
includes stainless steel screws and dowels.
STRX670
304x170x355mm
Stratos sanitary towel disposal bin for wall mounting
Sanitary towel disposal bin for wall mounting, stainless steel, surface
satin finish, front with InoxPlus® surface refinement which reduces
fingerprints and makes it easier to clean, material thickness 1.5mm,
curved front cover, approximately. 3.8 litre capacity, folding self-closing
lid with stainless steel piano hinge, removable plastic container inside,
includes stainless steel screws and dowels.
STRX611
205x134x305mm
Stratos open waste bin for wall mounting
Waste bin for wall mounting, stainless steel, surface satin finish, front
with InoxPlus® surface refinement which reduces fingerprints and makes
it easier to clean, material thickness 1.5mm, curved front cover, cylinder
lock with Franke standard key, integrated bag holder, includes stainless
steel screws and dowels.
STRX605
STRX607
+
Recommended
STRX608
Tel 01246 458900 | www.franke.co.uk
34 litre capacity 300x270x520mm
45 litre capacity 396x270x521mm
Folding self closing lid with flap for the STRX607
40
ACCESSORIES AND
HAND DRYERS
IMAGE
ACCESSORIES AND HAND DRYERS
STRATOS WALL MOUNTED
ACCESSORIES AND
HAND DRYERS
IMAGE
ITEM NUMBER
TYPE/MODEL
Stratos toilet brush holder for wall mounting
Toilet brush holder for wall mounting, stainless steel, surface satin finish,
front with InoxPlus® surface refinement which reduces fingerprints and
makes it easier to clean, material thickness 1.5mm, curved front cover,
white nylon brush with flushing rim cleaner, removable plastic drip tray,
includes stainless steel screws and dowels.
STRX687
110x111x230mm
Stratos shelf for wall mounting
Shelf for wall mounting, stainless steel, surface satin finish, front with
InoxPlus surface refinement which reduces fingerprints and makes it easier
to clean, material thickness 2 mm, rounded edges, protection edge at front,
includes stainless steel screws and dowels.
STRX624
600x110x45mm
Stratos hooks for wall mounting
Hook for wall mounting, stainless steel, surface satin finish, 18mm pipe
diameter, drilled hole on bottom for fixation, includes stainless steel
screws and dowels.
STRX692
STRX694
Single hook
Double hook
Stratos combination paper towel and soap dispenser for wall mounting
Combination paper towel and soap dispenser for wall mounting, stainless
steel, surface satin finish, front with InoxPlus® surface refinement which
reduces fingerprints and makes it easier to clean, material thickness 1.5mm,
curved front cover, with two inspection windows, cylinder lock with Franke
standard key, paper towel dispenser with capacity 300-400 Z-fold towels,
soap dispenser suitable for liquid soaps and lotions, 0.8 litre soap tank,
plastic dispensing handle, includes stainless steel screws and dowels.
STRX601
+
Recommended
FH68
SO1L
SO10L
41
396x134x305mm
Paper towels (168 per pack) minimum order
quantity 20 packs
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
STRATOS RECESSED
ITEM NUMBER
TYPE/MODEL
Stratos soap dispenser for recessed mounting for liquid soap
Soap dispenser for recessed mounting, stainless steel, surface satin finish,
front with InoxPlus® surface refinement which reduces fingerprints and makes
it easier to clean, material thickness 1.5mm, curved front cover, cylinder lock
with Franke standard key, inspection window on front, suitable for liquid soaps
and lotions as well as antiseptic soaps, 1 litre soap tank, push button on front,
includes stainless steel screws and dowels.
STRX619E
+
211x151x181mm
Recommended
SO1L
SO10L
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Stratos paper towel dispenser for recessed mounting
Paper towel dispenser for recessed mounting, stainless steel, surface
satin finish, front with InoxPlus® surface refinement which reduces
fingerprints and makes it easier to clean, material thickness 1.5mm,
curved front cover, inspection window, cylinder lock with Franke
standard key, loading capacity 300-400 Z-fold towels, includes stainless
steel screws and dowels.
STRX600E
+
327x147x632mm
Recommended
FH68
Paper towels (168 per pack) minimum order
quantity 20 packs
Stratos single toilet roll holder with cover for recessed mounting
Toilet roll holder for recessed mounting, stainless steel, surface satin
finish, material thickness 0.8mm, curved lid, for one roll up to maximum
diameter of 130mm, includes stainless steel screws and dowels.
STRX673E
153x120x153mm
Stratos double toilet roll holder without spindle system for
recessed mounting
Double toilet roll holder for recessed mounting, stainless steel, surface
satin finish, front with InoxPlus® surface refinement which reduces
fingerprints and makes it easier to clean, material thickness 1.5mm,
curved front cover, closed housing with inspection window, cylinder lock
with Franke standard key, for two rolls up to maximum diameter of
120mm, second roll falls when clip is folded up into dispense position,
without spindle system, includes stainless steel screws and dowels.
STRX671E
Tel 01246 458900 | www.franke.co.uk
197x172x371mm
42
ACCESSORIES AND
HAND DRYERS
IMAGE
ACCESSORIES AND HAND DRYERS
STRATOS RECESSED
ACCESSORIES AND
HAND DRYERS
IMAGE
ITEM NUMBER
TYPE/MODEL
Stratos double toilet roll holder with spindle system for recessed
mounting
Double toilet roll holder for recessed mounting, stainless steel, surface
satin finish, front with InoxPlus® surface refinement which reduces
fingerprints and makes it easier to clean, material thickness 1.5mm,
curved front cover, closed housing with inspection window, cylinder lock
with Franke standard key, for two rolls up to maximum diameter of
120mm, second roll will be released after consumption of first roll,
second roll not visible, with spindle system, includes stainless steel
screws and dowels.
STRX672E
183x142x331mm
Stratos sanitary towel disposal bin for recessed mounting
Sanitary towel disposal bin for recessed mounting, stainless steel,
surface satin finish, front with InoxPlus® surface refinement which
reduces fingerprints and makes it easier to clean, material thickness
1.5mm, curved front cover, approximately. 3.8 litre capacity, folding
self-closing lid with stainless steel piano hinge, removable plastic
container inside, includes stainless steel screws and dowels.
STRX611E
232x134x331mm
Stratos small open waste bin for recessed mounting
Waste bin for recessed mounting, stainless steel, surface satin finish, front
with InoxPlus® surface refinement which reduces fingerprints and makes
it easier to clean, material thickness 1.5mm, curved front cover, cylinder
lock with Franke standard key, approximately. 22 litre capacity, integrated
bag holder, includes stainless steel screws and dowels.
STRX605E
43
327x202x862mm
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
STRATOS RECESSED
ITEM NUMBER
TYPE/MODEL
Stratos combination paper towel and soap dispenser for recessed
mounting
Combination paper towel dispenser and soap dispenser for recessed mounting,
stainless steel, surface satin finish, front with InoxPlus® surface refinement
which reduces fingerprints and makes it easier to clean, material thickness
1.5mm, curved front cover, with two inspection windows, both parts with
cylinder lock and Franke standard key, paper towel dispenser with loading
capacity 300-400 Z-fold towels, soap dispenser suitable for liquid soaps and
lotions as well as antiseptic soaps, 0.8 litre soap tank, plastic dispensing handle,
includes stainless steel screws and dowels.
STRX601E
+
424x147x632mm
Recommended
FH68
SO1L
SO10L
Paper towels (168 per pack) minimum order
quantity 20 packs
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Stratos combination paper towel dispenser and waste bin for
recessed mounting
Combination paper towel dispenser and waste bin for recessed mounting,
stainless steel, surface satin finish, front with InoxPlus® surface
refinement which reduces fingerprints and makes it easier to clean,
material thickness 1.5mm, curved front cover, cylinder lock with Franke
standard key, inspection windows on front, loading capacity 300-400
Z-fold towels, waste bin with approximately. 22 litre capacity, integrated
bag holder, includes stainless steel screws and dowels.
STRX602E
+
Recommended
FH68
Tel 01246 458900 | www.franke.co.uk
328x203x1162mm
Paper towels (168 per pack) minimum order
quantity 20 packs
44
ACCESSORIES AND
HAND DRYERS
IMAGE
ACCESSORIES AND HAND DRYERS
STRATOS TOUCH FREE
ACCESSORIES AND
HAND DRYERS
IMAGE
ITEM NUMBER
TYPE/MODEL
Tall Stratos touch-free soap dispenser for wall mounting for liquid
soap (battery operated)
Touch-free soap dispenser for wall mounting, stainless steel, surface
satin finish, front with InoxPlus® surface refinement which reduces
fingerprints and makes it easier to clean, material thickness 1.5mm,
curved front cover, cylinder lock with Franke standard key, infra-red
sensor for non-touch operation, integrated shut-off when housing is
opened, LED indicates low-battery status, includes 6 x 1.5V (=9V) AA
alkaline batteries, suitable for liquid soaps and lotions, 0.8 litre soap
tank, dispenses 0.6 to 1.1ml depending on soap, includes stainless steel
screws and dowels.
STRX625
+
120x126x303mm
Recommended
SO1L
SO10L
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Stratos touch-free paper towel dispenser for wall mounting
(battery operated)
Touch-free paper towel dispenser for wall mounting, stainless steel,
surface satin finish, front with InoxPlus® surface refinement which
reduces fingerprints and makes it easier to clean, material thickness
1.5mm, curved front cover, cylinder lock with Franke standard key,
infra-red sensor for non-touch operation, integrated tear-off edge,
includes four standard D 1.5V (=6V) batteries, maintenance free
mechanism and easy paper roll change, for rolls with maximum width
205mm and maximum diameter 220mm, paper length adjustable to 200,
250 and 300mm, includes stainless steel screws and dowels.
STRX630
300x234x385mm
Stratos touch-free stainless steel hand dryer
Touch-free hand dryer for wall mounting, electronic warm air hand dryer,
stainless steel, surface satin finish, front with InoxPlus® surface
refinement which reduces fingerprints and makes it easier to clean,
material thickness 1.5mm, curved front cover, infra-red sensor for
non-touch operation, sensor range adjustable from 5 to 33cm, automatic
power shut-off after 60 seconds, due to the extreme high, adjustable air
velocity the drying time is shortened considerably, cable and plug not
included.
- Connection voltage: 230V, 50Hz
- Total power: 1500W
- Heater: 800W
- Motor: 700W motor
- Air volume: 120m³/h
- Air velocity: 75-110m/s
STRX210
45
300x197x305mm
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
IMAGE
XINOX®
XINOX® – designer products for toilets and
washrooms, always stays clean and stainfree, thanks to InoxPlus® surface treatment.
1
3
1 Distinctive curved edges and shadow gap
for the ultimate in high design
2 2mm thick grade 304 stainless steel
2
6
3 Stainless steel lock
4 Includes separate soap tank
5
4
5 Inspection window on front
6 All of unit with surface refinement
Inox Plus for the reduction of fingerprints.
This is manufactured with the unit and not
applied after.
InoxPlus® surface treatment
Microscopic particles mesh with the molecules of the material surface
to even out the imperfections that are invisible to the naked eye. The fine
structure that results makes fingerprints virtually invisible.
Tel 01246 458900 | www.franke.co.uk
46
ACCESSORIES AND HAND DRYERS
XINOX WALL MOUNTED
ACCESSORIES AND
HAND DRYERS
IMAGE
ITEM NUMBER
TYPE/MODEL
XINOX soap dispenser for wall mounting for liquid soap
Soap dispenser made of stainless steel, with surface refinement for the
reduction of fingerprints and makes it easier to clean, material thickness
2.0mm, surface satin finish. Suitable for liquid soaps and lotions as well
as antiseptic soaps. 1 litre container, lock with XINOX® standard key,
inclusive screws and dowels.
XINX617
+
104x117x300mm
Recommended
SO1L
SO10L
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
XINOX soap dispenser for wall mounting for foam soap
Foam soap dispenser made of stainless steel, with surface refinement for
the reduction of fingerprints and makes it easier to clean, material
thickness 2mm, surface satin finish. Suitable just for FRANKE foam soap
1 litre container, standard lock with XINOX® standard key, inclusive
screws and dowels.
XINX616
+
104x117x300mm
Recommended
E-XINX616
Foam soap, 650ml - minimum order quantity
9 bottles
XINOX paper towel dispenser for wall mounting
Paper towel dispenser for wall mounting, made of stainless steel, surface
satin finish with InoxPlus surface refinement which reduces fingerprints
and makes it easier to clean, material thickness 2 mm, casing with
revolving shadow gap and curved profile, key and lock stainless steel,
inspection window on front, loading capacity 300 - 400 pcs. of paper
depending on brand and folding, includes stainless steel screws and
dowels.
XINX600
+
268x117x300mm
Recommended
FH68
Paper towels (168 per pack) minimum order
quantity 20 packs
XINOX single toilet roll holder
Toilet roll holder made of stainless steel, with surface refinement for the
reduction of fingerprints and makes it easier to clean, surface satin
finish. Material thickness 2.0mm, for 1 roll, maximum 120mm, includes
screws and dowels.
XINX677
47
136x140x135mm
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
XINOX WALL MOUNTED
ITEM NUMBER
TYPE/MODEL
XINOX double toilet roll holder
Double toilet paper roll holder made of stainless steel, with surface
refinement for the reduction of fingerprints and better cleaning
characteristic (easy to clean), surface satin finish. With XINOX® standard
lock, material thickness 2mm, for 2 rolls, maximum 120mm, second roll
will be released after consumption of the first roll, inclusive screws and
dowels.
XINX672
136x160x220mm
XINOX toilet brush holder
Toilet brush holder made of stainless steel, with surface refinement for
the reduction of fingerprints and makes it easier to clean, surface satin
finish, material thickness 2.0mm, for wall mounting. Includes screws and
dowels.
XINX687
110x117x300mm
XINOX waste bin for wall mounting
Waste bin for wall mounting, stainless steel, surface satin finish with
InoxPlus surface refinement which reduces fingerprints and makes it
easier to clean, material thickness 2 mm, casing with revolving shadow
gap and curved profile, approximately 7 litre capacity, folding self closing
lid, integrated bag holder, includes stainless steel screws and dowels.
XINX605
268x117x300mm
XINOX large floor standing waste bin
Waste bin, free standing or with optional wall mounting device, made of
stainless steel, with surface refinement for the reduction of fingerprints and
makes it easier to clean, material thickness 2.0mm, surface satin finish. With
lid to open, bag holding device, lock with XINOX® standard key, includes
screws and dowels.
XINX606
XINX608
+
Recommended
E-XINX606
E-XINX608
Tel 01246 458900 | www.franke.co.uk
30 litre capacity
60 litre capacity
XINOX Wall fixing device for XINX606
XINOX Wall fixing device for XINX608
48
ACCESSORIES AND
HAND DRYERS
IMAGE
ACCESSORIES AND HAND DRYERS
XINOX TOUCH FREE
ACCESSORIES AND
HAND DRYERS
IMAGE
ITEM NUMBER
TYPE/MODEL
XINOX touch free soap dispenser for wall mounting for liquid soap
(battery operated)
Touch free soap dispenser for wall mounting, stainless steel, surface
satin finish with InoxPlus surface refinement which reduces fingerprints
and makes it easier to clean, material thickness 2mm, casing with
revolving shadow gap and curved profile, key and lock stainless steel,
inspection window on front, infrared sensor activity for non-touch
operation, LED shows battery status, includes 6 x 1.5 V Alkaline AA
batteries, suitable for liquid soaps and lotions, 0.8 l soap tank, includes
stainless steel screws and dowels.
XINX625
+
120x117x300mm
Recommended
SO1L
SO10L
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
XINOX touch free paper towel dispenser for wall mounting
(battery operated)
Touch free paper towel dispenser for wall mounting, stainless steel,
surface satin finish with InoxPlus surface refinement which reduces
fingerprints and makes it easier to clean, material thickness 2 mm,
casing with revolving shadow gap and curved profile, key and lock
stainless steel, inspection window on front, infrared sensor activity for
non-touch operation, integrated tear-off edge, includes 4 x standard D
1.5 V batteries, maintenance free mechanism and easy paper roll
change, for rolls with maximum width 205mm and maximum diameter
200mm, paper length adjustable to 200, 250 and 300mm, includes
stainless steel screws and dowels.
XINX630
340x225x380mm
XINOX touch free stainless steel hand dryer
Hand dryer for wall mounting, electronic warm air hand dryer, made of
stainless steel, surface satin finish with surface refinement for the
reduction of fingerprints and makes it easier to clean, material thickness
2.0mm, casing with shadow gap and curved profile, infra-red sensor
activity for non-touch operation, sensor range adjustable from 5 to
33cm, automatic power shut-off after 60 seconds, due to the extreme
high adjustable air velocity the drying time is shortened although the
blower output is relatively low, cable and plug not included.
- Electrical data: 230V, 50Hz
- Total output: 1500W
- Heating: 800W
- Motor: 700W
- Blower output: 120m³/h
- Air velocity: 75-110m/s
XINX210
49
340x180x300mm
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
HAND DRYERS
ITEM NUMBER
TYPE/MODEL
ACCESSORIES AND
HAND DRYERS
IMAGE
Hand dryer with ABS plastic cover
Touch free hand dryer for wall mounting, made of fire retardant ABS,
material thickness 3mm, infra-red sensor activity for non-touch
operation, sensor range adjustable from 10 to 30cm, automatic power
shut-off after 120 seconds, cable and plug not included.
- Electrical data: 230V, 50Hz
- Total output: 1800W
- Heating: 1720W
- Motor: 80W motor with 2850 rpm
- Blower output: 255m³/h
- Air velocity: 14.5m/s
ARTW410
268x177x230mm
Eco-Airblast Maxi Plus dryer
The Eco-Airblast Maxi Plus is a warm, high speed ‘hands in’ dryer, which
dries hands in only 10 - 12 seconds. It cleverly recycles heat from the motor
to generate warm air and is easy-to-clean with a removable water tank.
Touch free with anti-bacterial surface protection. Puretab tablets can be
purchased as an extra to control odour and prevent sludge build up in the
drip tray.
F0442
F0443
+
Eco-Airblast Maxi Plus, White ABS, 1200W
Eco-Airblast Maxi Plus, Silver ABS, 1200W
Recommended
F0375
Puretab tablets (pack of 20)
Eco-Airblast Midi Plus dryer
The Eco-Airblast Midi Plus is a high speed ‘hands under’ dryer. It includes a
maintenance free, built in ioniser which purifies the air and has an internal
switch that allows the choice of cool air at 550W or warm air at 1250W. Low
running costs and easy fit junction box for quick installation. Touch free
operation with blue down light when in use.
F0440
Eco-Airblast Midi Plus, White Steel 550W-1250W
F0441
+
Eco-Airblast Midi Plus, Polished Chrome
550W-1250W
Recommended
F0446
Yellow Fragrance ring
Airblast hand dryer
The Airblast hand dryer is a high powered, fast drying, innovative hand
dryer. It has an internal switch that enables a choice of cool air at 550W or
warm air at 1400W. Drying time is approximately 10-12 seconds and it’s
ideal for retro-fit as larger body covers screw holes. Touch free operation
with blue down light when in use.
F1390
F1391
F1392
F1393
Tel 01246 458900 | www.franke.co.uk
Airblast, White Steel 550W-1400W
Airblast, Black Steel 550W-1400W
Airblast, Polished Stainless Steel
550W-1400W
Airblast, Satin Stainless Steel
550W-1400W
50
ACCESSORIES AND HAND DRYERS
HEAVY DUTY ACCESSORIES
ACCESSORIES AND
HAND DRYERS
IMAGE
ITEM NUMBER
TYPE/MODEL
Heavy-duty soap dispenser for wall mounting
Wall mounted liquid soap dispenser (1 litre) manufactured from stainless
steel with security lock and 5 year guarantee for covering. The cover is
held in place by a stainless steel rod that is fixed to the mounting plate
and a security lock. Screws and dowels included.
SD300
+
130x127x300mm
Recommended
SO1L
SO10L
Liquid soap, 1 litre - minimum order quantity
6 bottles
Liquid soap canister, 10 litres
Heavy duty paper towel dispenser for wall mounting
Paper towel dispenser for wall mounting, stainless steel, surface satin
finish, material thickness 2 mm, complete closed casing, held in place by
a stainless steel rod fixed to the mounting plate and a security lock,
loading capacity 400 - 600 pcs. of paper depending on brand and
folding, includes stainless steel screws and dowels.
TD350
258x127x352mm
Heavy-duty single toilet roll holder with lock for wall mounting
Toilet roll holder manufactured from 2mm thick stainless steel polished
to a satin finish with vandal resistant spindle, for 1 roll. Screws and
dowels included.
RH140HD
140x110x110mm
Heavy-duty triple toilet roll holder for wall mounting
Triple toilet roll holder, manufactured from 2mm thick stainless steel,
polished to a satin finish with vandal resistant casing and 5 year
guarantee for covering. The cover is held in place by a stainless steel rod
that is fixed to the mounting plate and a security lock. Screws and
dowels included.
HDTX674
130x150x415mm
Heavy-duty jumbo toilet roll holder for wall mounting
Jumbo toilet roll holder manufactured from 2mm thick stainless steel, with
security lock, vandal resistant casing and 5 year guarantee for covering.
The cover is held in place by a stainless steel rod that is fixed to the
mounting plate and a security lock.
RH320
51
320x130x320mm
Tel 01246 458900 | www.franke.co.uk
ACCESSORIES AND HAND DRYERS
HEAVY DUTY ACCESSORIES
ITEM NUMBER
TYPE/MODEL
Heavy-duty wall shelf
Vanity shelf manufactured from 2mm thick stainless steel. The unit has
an upturned front edge with rounded corners and is drilled for wall fixing
- vandal resistant screws are not included. (1 set necessary).
AL300HD
300x80x30mm
Security coat hook
Security coat hook, stainless steel, material thickness 2 mm, visible
surface satin finish. Safety hook tilts downwards when overloaded,
projection 30 mm from wall plate. Dimensions 108 x 108 x 52 mm.
HDTX692
HDTX693
Front mounted
Mounted from behind with threaded bolts
Heavy-duty mirror
Surface mounted mirror manufactured from 8mm thick stainless steel,
surface high polished, thief proofed mounting system due to underlaying
polystyrene plate with hidden screws, includes screws and dowels.
M500HD
M500HDx8xmm
M600HD x8xmm
Tiltable stainless steel mirror
Tiltable mirror for wall mounting, mirror and brackets stainless steel,
mirror with a reflective polished surface, brackets surface satin finish,
material thickness mirror 8mm, material thickness brackets 4mm,
reinforced with polystyrene plate and hidden fixings, reinforced 1.5mm
stainless steel bracket on backside, swingable due to premounted lever,
lever can be mounted right or left, includes screws and dowels.
CNTX91
Tel 01246 458900 | www.franke.co.uk
600x8x500mm
52
ACCESSORIES AND
HAND DRYERS
IMAGE
53
WASHBASINS AND
WASHTROUGHS
WASHBASINS AND
WASHTROUGHS
Well-maintained toilets and washrooms
do not just convey a good image – they
demonstrate cleanliness to visitors, be it
in a favourite restaurant, exhibition centre
or place of work.
PRODUCT FEATURES
- Hygienic, joint-free basins
- Smooth basin shapes, round, oval and corner versions
- Inset and wall mounted models available
- Overflow kits available
- Mounting kit included
- Hands free washing models available
Available in a choice of finishes:
- Satin polished stainless steel
- High polished stainless steel
Available in a choice of materials:
- Stainless steel
- Composite resin
Tel 01246 458900 | www.franke.co.uk
54
WASHBASINS AND WASHTROUGHS
ROUND INSET WASHBASINS
IMAGE
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
Rondo inset washbasins 200mm diameter
Inset washbasin manufactured from stainless steel with finishes as
shown below (to bowl interior and exterior). Complete with 32mm waste
hole, without overflow, including chrome-plated distance piece, for
surface or undermounting installation.
RNDH200
RNDX200
Inset washbasin no overflow, high polish
finish inside and out. ∅200mm
Inset washbasin no overflow, satin finish
inside and out. ∅200mm
Both come with waste kit.
Rondo inset washbasins various sizes
Inset washbasin manufactured from stainless steel with finishes as
shown below (to bowl interior and exterior). For surface or
undermounting installation. Includes overflow kit without waste.
RNDH260
RNDX260
RNDH300
RNDX300
RNDH360
RNDX360
RNDH381
RNDX381
RNDH420
RNDX420
+
Inset washbasin with overflow, high polish
finish inside and out. ∅300mm
Inset washbasin with overflow, satin finish
inside and out. ∅300mm
Inset washbasin with overflow, high polish
finish inside and out. ∅360mm
Inset washbasin with overflow, satin finish
inside and out. ∅360mm
Inset washbasin with overflow, high polish
finish inside and out. ∅381mm
Inset washbasin with overflow, satin finish
inside and out. ∅381mm
Inset washbasin with overflow, high polish
finish inside and out. ∅420mm
Inset washbasin with overflow, satin finish
inside and out. ∅420mm
Requires either
F2126
F2109
55
Inset washbasin with overflow, high polish
finish inside and out. ∅260mm
Inset washbasin with overflow, satin finish
inside and out. ∅260mm
32mm slotted spring loaded dome waste or
32mm chrome-plated syphon and trap
Tel 01246 458900 | www.franke.co.uk
WASHBASINS AND WASHTROUGHS
ROUND INSET WASHBASINS
ITEM NUMBER
TYPE/MODEL
Rimmed edge round inset sink bowl
Round inset sink bowl manufactured from 1.2mm thick, grade 1.4301
(304) stainless steel, satin polish finish. Incorporates a rimmed edge for
insetting into a worktop. Prepared for a 32mm waste outlet and overflow.
No tap holes are provided, any taps to be fitted must be mounted either
through the worktop or wall mounted.
Note: It may be necessary to notch the worktop when fitting an overflow.
D20140N
+
∅305x160mm
Required
F2117
32mm waste, plug, chain and overflow
Rimmed edge round inset sink bowls
Round inset sink bowl manufactured from 1.2mm thick, grade 1.4301
(304) stainless steel, high polish finish. The bowls incorporate a rimmed
edge for insetting into a worktop. Prepared for a 32mm waste outlet and
overflow. No tap holes are provided, any taps to be fitted must be
mounted either through the worktop or wall mounted.
Note: It may be necessary to notch the worktop when fitting an overflow.
D20142N
D20144N
+
∅380x160mm
∅432x190mm
Required
F2117
32mm waste, plug, chain and overflow
Inset washbasin
Fitted with 32mm waste. High polish finish to inside and outside of bowl.
BR300OU
∅340mm
Inset hand washbasin
Washbasin for insetting into worktop, manufactured from grade 1.4301
(304) stainless steel – satin polish finish, material thickness 1.2mm.
Prepared for 32mm waste outlet and overflow hole with two tap holes in
the rear ledge behind the bowl – suitable for basin taps only (Deck
mixers cannot be fitted). Bowls are supplied complete with fixing kit for
insetting into worktops.
D20170N
+
Required
F2117
+
32mm waste, plug, chain and overflow
Recommended
F1080
Tel 01246 458900 | www.franke.co.uk
External: ∅385x160mm, bowl: ∅290mm
13mm crosshead basin taps
56
WASHBASINS AND
WASHTROUGHS
IMAGE
WASHBASINS AND WASHTROUGHS
ROUND INSET WASHBASINS
IMAGE
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
Inset hand washbasin
Washbasin for insetting into worktop, manufactured from grade 1.4301
(304) stainless steel – satin polish finish, material thickness 1.2mm.
Prepared for 32mm waste outlet and overflow hole with two tap holes in
the rear ledge behind the bowl – suitable for basin taps only (Deck
mixers cannot be fitted). Bowls are supplied complete with fixing kit for
insetting into worktops.
D20171N
+
Required
F2117
+
External: ∅440x130mm, bowl:
∅350x122mm
32mm waste, plug, chain and overflow
Recommended
F1080
13mm crosshead basin taps
Inset washbasin - no taphole
Inset washbasin manufactured from grade 1.4301 (304) stainless steel,
thickness 1.2mm with finishes as shown below. Deep-drawn in one
piece, prepared for 32mm waste and overflow (overflow connection
supplied). The bowl can be mounted through the top or alternatively from
the underside of the worktop.
∅450x330x159mm internal measurement
RNDH450-0
RNDX450-0
+
High polish finish inside
Satin finish inside
Required
F2126
32mm slotted spring loaded dome waste
Inset washbasin - with taphole
Inset washbasin manufactured from grade 1.4301 (304) stainless steel,
thickness 1.2mm with finishes as shown below. Deep-drawn in one piece
with ∅35mm tap hole. Prepared for 32mm waste and overflow. The bowl
can be mounted through the top or alternatively from the underside of
the worktop.
∅450x330x155mm internal measurement
RNDH451-0
RNDX451-0
+
Required
F2126
57
High polish finish inside
Satin finish inside
32mm slotted spring loaded dome waste
Tel 01246 458900 | www.franke.co.uk
WASHBASINS AND WASHTROUGHS
RIMMED EDGE BOWLS FOR INSETTING
ITEM NUMBER
TYPE/MODEL
Rimmed edge bowl (for insetting)
Large sink bowl for insetting into worktops with a rimmed edge.
Manufactured from 1.2mm thick stainless steel with a satin polish finish.
An earthing lug is fitted to the underside of the bowl. Supplied with 38mm
waste outlet, standpipe strainer, fixing studs and brackets. Full fitting
instructions are supplied.
C20136L/R
Bowl: 610x460x300mm
L or R after the code number refers to the handing of the waste, ie. left or
right when facing front of unit.
Rimmed edge bowls (for insetting)
C20120N
A range of small inset sink bowls manufactured from 0.9mm thick grade
1.4301 (304) stainless steel, satin polish finish. All have rimmed edges,
suitable for insetting into a worktop. Models C20120N and C20137N have
a 17mm rimmed edge whereas all the other sink bowls incorporate a
20mm rimmed edge. Each bowl is prepared for a 38mm waste and
overflow. Waste, plug, chain and overflow are available as extras. No tap
holes are provided therefore any taps to be fitted must be mounted either
through the worktop or on the wall. Fixing clips are supplied with each
bowl.
Note: It may be necessary to notch the worktop when fitting an overflow.
C20174/5N
C20120N
380x300x180mm. Cut out size 390x315mm
C20174N
C20175N
460x340x180mm. Cut out size 470x350mm
460x340x250mm. Cut out size 470x350mm
C20132N
C20133N
400x400x250mm. Cut out size 410x410mm
400x400x300mm. Cut out size 410x410mm
C20137N
420x350x180mm
C20148N
C20149N
C20150N
500x400x200mm. Cut out size 510x410
500x400x250mm. Cut out size 510x410
500x400x300mm. Cut out size 510x410
C20132N/3N
+
Required
F2119
C20137N
38mm waste, plug, chain and overflow
Some models also available in grade 316 stainless steel.
Please ask us for more details.
C20148/49/50N
Tel 01246 458900 | www.franke.co.uk
58
WASHBASINS AND
WASHTROUGHS
IMAGE
WASHBASINS AND WASHTROUGHS
KNEE OPERATED WASHBASINS
IMAGE
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
Knee operated washbasin
Knee operated hand wash basin is manufactured from stainless steel –
satin polish finish, material thickness 0.9mm. Supplied complete with
water spout positioned in rear right hand corner and 32mm waste outlet.
Note: The pre-mixing valve and the pipework linking the water spout to
the knee operated front panel are both supplied with the washbasin. Wall
mounted by fitting a top joggle strip under the upstand return and by
screw fixing through the integral rear brackets. Screws and plugs are not
supplied.
ANMX206
External: 460x380x520mm, bowl:
410x265mm
Knee operated washbasin
Knee operated hand wash basin is manufactured from stainless steel –
satin polish finish, material thickness 0.9mm. Supplied complete with
water spout positioned in rear right hand corner and 32mm waste outlet.
Note: The pre-mixing valve and the pipework linking the water spout to
the knee operated front panel are both supplied with the washbasin. Wall
mounted by fitting a top joggle strip under the upstand return and by
screw fixing through the integral rear brackets. Screws and plugs are not
supplied.
ANMX216
External: 305x268x501mm, bowl:
240x125mm
Knee operated washbasin
Knee operated hand wash basin is manufactured from stainless steel –
satin polish finish, material thickness 0.9mm. Supplied complete with
water spout positioned in rear right hand corner and 32mm waste outlet.
Note: The pre-mixing valve and the pipework linking the water spout to
the knee operated front panel are both supplied with the washbasin. Wall
mounted by fitting a top joggle strip under the upstand return and by
screw fixing through the integral rear brackets. Screws and plugs are not
supplied.
ANMX212
59
External: 382x335x533mm, bowl:
290x153mm
Tel 01246 458900 | www.franke.co.uk
WASHBASINS AND WASHTROUGHS
OTHER WASHBASINS
ITEM NUMBER
TYPE/MODEL
Inset hand washbasin
Washbasin for insetting into worktop, manufactured from grade 1.4301
(304) stainless steel – satin polish finish, material thickness 0.9mm.
Prepared for 32mm waste outlet and overflow hole with two tap holes in
the rear ledge behind the bowl – suitable for either basin taps or deck
mixer taps. Bowls are supplied complete with fixing clips for insetting into
worktops.
D20167N
D20167N
D20168N
+
Required
F2117
+
300 250
External: 420x400mm, bowl:
360x272x135mm
External: 472x390mm, bowl:
410x265x140mm
32mm waste, plug, chain and overflow
Recommended
F1080
13mm crosshead basin taps
D20168N
Single washbasin
Single washbasin, manufactured from stainless steel as a one piece
pressing complete with a 38mm waste/overflow fitting, stainless steel
integral wall bracket and facia panel – with a 120mm tap ledge. Screws
and dowels included. Material thickness 1.0/1.25mm.
External: ∅425x545x215, bowl: ∅385x170mm
BRP390
BRC390SF
Perforated fascia panel
Smooth fascia panel
Centinel washbasin
The Centinel washbasin is manufactured from 1.2mm thick grade EN
1.4301 (304) stainless steel polished to a satin finish. The bowl is
prepared for and supplied with a 32mm flush grated waste only (no
overflow can be fitted). Complete with bottom access panel for fixing
(using bolts supplied) and plumbing connections.
330x350x310mm
G20131N
ANMX205
+
Recommended
AQUA201W
Tel 01246 458900 | www.franke.co.uk
1 tap hole
No tap holes
Self closing pillar tap for connection to
pre-mixed warm water
60
WASHBASINS AND
WASHTROUGHS
IMAGE
WASHBASINS AND WASHTROUGHS
OTHER WASHBASINS
IMAGE
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
Hand washbasin
Washbasin manufactured from grade 1.4301 (304) stainless steel – satin
polish finish. Supplied complete with 32mm waste outlet. No tap holes
provided – for use with wall mounted taps. Wall mounting, including
screws and dowels.
WB240WM
315x320x105mm
Model A washbasin
Washbasin manufactured from 0.9mm thick, grade 1.4301 (304)
stainless steel. Prepared for 32mm waste outlet and is supplied with two
tap holes in the rear ledge.
Note: It is not possible to fit an overflow in the bowl. Wall mounting by
using the fixing holes provided in both the rear upstand and the rear
apron fixing brackets. Screws and plugs are not supplied.
External: 290x290x157mm, bowl: 240x125mm
D20161N
D20195N
D20185N
With apron support and waste kit
With crosshead taps and waste kit
With lever taps and waste kit
Model B washbasin
Washbasin manufactured from 0.9mm thick, grade 1.4301 (304)
stainless steel. Prepared for 32mm waste outlet and overflow and is
supplied with two tap holes in the rear ledge. Wall mounting by using the
fixing holes provided in both the rear upstand and the rear apron fixing
brackets. Screws and plugs are not supplied.
External: 340x345x185mm, bowl: 290x153mm
D20162N
D20196N
D20186N
W
E
N
With apron support and waste and
overflow kit
With crosshead taps and waste and
overflow kit
With lever taps and waste and overflow kit
Model A corner Washbasin
Washbasin manufactured from 1.2mm thick, grade 1.4301 (304)
stainless steel. Prepared for 32mm waste outlet and overflow and is
supplied with two tap holes in the rear ledge. Wall mounting by using the
fixing holes provided
External: 300x300x150mm, bowl: 240x125mm
D20164N
D20198N
D20188N
61
With apron support, waste and overflow kit
With crosshead taps, waste and overflow kit
With lever taps, waste and overflow kit
Tel 01246 458900 | www.franke.co.uk
WASHBASINS AND WASHTROUGHS
OTHER WASHBASINS
ITEM NUMBER
TYPE/MODEL
Hand washbasin - with soap trays
Single washbasin made of 0.9mm thick stainless steel with integral soap
trays, 32mm BSP waste and complete with wall brackets.
External: 550x450x155mm, basin: 500x335x155mm
BS205-M
BS205
BS204
With overflow, single tap hole,
plug and chain
With overflow and no tap hole
No overflow and no tap hole
Model WB18 washbasin
Washbasin manufactured from 0.9mm thick grade 1.4301 (304) stainless
steel – satin polish finish and high polish for apron support. Prepared for
32mm waste outlet and overflow. Supplied with two tap holes in the rear
ledge. Wall mounted by using the fixing holes provided in both the rear
upstand and the rear apron fixing brackets. Screws and plugs are not
supplied.
External: 457x357x165mm, bowl: 410x265x131mm
D20163N
D20197N
D20187N
With apron support and waste kit
With crosshead taps and waste kit
With lever taps and waste kit
Washbasin
Single wash basin for wall mounting, stainless steel, surface satin
finished, material thickness 1mm, seamless welded bowl, rectangular
shape, 70 or 80mm tap landing (depending upon model), with overflow,
32mm plug waste, integral brackets, includes screws and dowels.
WT500A
WT500A
WT500A-M
WT600A
WT600A-M
Without taphole 500x402x200mm
With 35mm taphole 500x402x200mm
Without taphole 600x440x200mm
With 35mm taphole 600x440x200mm
WT600A
Flat flange bowl for welding in
A flat flange bowls manufactured from 0.9mm thick grade 1.4301 (304)
stainless steel, satin polish finish. Prepared for a 38mm waste and
overflow. Waste, plug, chain and overflow is available as an extra. No tap
holes are provided therefore any taps to be fitted must be mounted
either through the worktop or on the wall. Fixing clips are supplied with
each bowl. NOTE: It may be necessary to notch the worktop when fitting
an overflow.
C20166N
+
Required
F2119
Tel 01246 458900 | www.franke.co.uk
38mm waste, plug, chain and overflow
62
WASHBASINS AND
WASHTROUGHS
IMAGE
WASHBASINS AND WASHTROUGHS
OTHER WASHBASINS
IMAGE
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
Handwashpac III (with battery-operated tap)
Handwashpac top is manufactured from grade 1.4301 (304) stainless
steel – satin polish finish, material thickness 0.9mm. The apron support
is made from 0.9mm material – high polish finish. Supplied complete with
battery operated tap and manual soap dispenser. A 32mm flush grated
waste outlet is also provided. No overflow is required on this unit. The
washbasin is screw fixed to the wall using the fixing holes provided in the
rear upstand and on the rear apron fixing brackets (no screws or plugs
supplied).
D20184N
External: 457x357x165mm,
bowl: 410x265x131mm
Single washbasin with tap and foot operation
Single washbasin with rear upstand, single tap hole, 32mm BSP waste
fitting and complete with three sided pedestal manufactured from
stainless steel. Fittings include swan-neck spout and foot-operated
timed control push valve for use with a pre-mixed water supply. Screws
and dowels included.
LP21
+
450x450x850mm
Spares
F1010
F1015
Push button valve c/w connection hoses
Push button
Food handler’s hand washbasin
Manufactured from 1.2mm thick stainless steel with a satin polish finish
throughout and with front leg supports. A thermostatic pre-mixer valve is
fitted to provide a constant temperature for the water supply. A paper
dispensing housing is located behind the hinged front panel (paper not
supplied). The bowl is supplied complete with a 32mm flush grated waste
outlet. Two tap holes are provided for fitting the lever operated tap and
soap dispensing unit which are both supplied with the wash basin. An
earthing lug is fitted to the underside of the bowl. Six fixing holes are
provided in the rear returns of the end panels for screwing to the wall
(screws and plugs are not supplied).
D20200N
+
Spares
F1330
63
External: 450x450x860mm,
bowl: ∅273x120mm
Optima Adriatic high neck basin taps
Tel 01246 458900 | www.franke.co.uk
WASHBASINS AND WASHTROUGHS
HEAVY DUTY AND DISABLED WASHBASINS
ITEM NUMBER
TYPE/MODEL
Guardian heavy duty washbasin
Washbasin is manufactured from 1.2mm thick grade 1.4301 (304)
stainless steel polished to a satin finish, with or without tap holes and
supplied with a 32mm flush grated waste. Bolt fixed and bolts and fittings
are provided. Products can be foam filled on request for extra strength
and reduction of noise in a security environment.
450x400x280mm
HDTX450P
G20476N
No tap holes
2 tap holes
Security washbasin
The washbasin is manufactured from 1.2mm thick grade 1.4301 (304)
stainless steel polished to a satin finish with or without tap holes and
supplied with 32mm flush grated waste. Complete with undershield and
concealed brackets for screw to wall installation. No screws or dowels
included.
460x380x550mm
G20480N
G20482N
No tap holes
tap holes
Wall inset washbasin with electronic water control
Wall inset washbasin for secure accommodation such as police cells. The
front fascia with smooth corners and the basin opening of a suitable size
to prevent self harm. Self-closing valve supplied. Designed in conjunction
with police authorities. Variations to suit other requirements available.
Products can be foam filled, on request, for extra strength and reduction of
noise in a security environment.
HDTX460
470x400x250mm
Disabled washbasin with upstand
Single washbasin manufactured from 1.5mm thick grade EN 1.4301 (304)
stainless steel polished to a satin finish. Supplied with a 32mm waste and
no overflow. No tap holes are provided, any taps to be fitted must be wall
mounted. A stainless steel shroud is included for covering and providing
access to the waste. Joggle mounting strip and base bracket provided for
mounting. Screws and plugs are not supplied.
ANMX020
Tel 01246 458900 | www.franke.co.uk
64
WASHBASINS AND
WASHTROUGHS
IMAGE
WASHBASINS AND WASHTROUGHS
MIRANIT WASHBASINS
IMAGE
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
Quadro washbasin
Made from MIRANIT resin bonded mineral material, with an alpine white
gelcoat surface finish that’s smooth, pore-free and temperature resistant
up to 80°c. With seamless rectangular bowl, without overflow. Integrated
back panel with integrated brackets and holes for fixing. Rear contoured
edge. Mounting material included (hanger bolts and dowels).
Single washbasin
Length of washbasin: 600mm, bowl dimensions (LxWxH):
520x375x40/90mm, three-sided apron: 60mm
ANMW410
ANMW411
Without tap hole
With tap hole
Double washbasin
Length of washbasin: 1400mm, bowl dimensions (LxWxH):
580x360x40/90mm, centre-to-centre distance of the bowls: 700mm,
three-sided apron: 60mm
ANMW420
ANMW421
Without tap hole
With tap hole
Triple washbasin
Length of washbasin: 2100mm, bowl dimensions (LxWxH):
580x360x40/90mm, centre-to-centre distance of the bowls: 700mm,
three-sided apron: 60mm
ANMW430
ANMW431
+
Requires either
F0431
F0430
+
Dome waste outlet 32mm
Sieve waste outlet 32mm
Recommended
F0432
XINX140
65
Without tap hole
With tap hole
Syphon cover and trap 32mm
Trap cover
Tel 01246 458900 | www.franke.co.uk
WASHBASINS AND WASHTROUGHS
MIRANIT WASHBASINS
ITEM NUMBER
TYPE/MODEL
Ronda washbasin
Made from MIRANIT resin bonded mineral material, with an alpine white
gelcoat surface finish that’s smooth, pore-free and temperature resistant
up to 80°c. With seamless round bowl, flattened out at the rear, without
overflow. Integrated back panel with integrated brackets and holes for
fixing. Rear contoured edge. Mounting material included (hanger bolts
and dowels).
Single washbasin
Length of washbasin: 600mm, bowl dimensions (LxWxH):
520x380x90mm, three-sided apron: 60mm
ANMW210
ANMW211
Without tap hole
With tap hole
Double washbasin
Length of washbasin: 1400mm, bowl dimensions (LxWxH):
540x380x90mm, centre-to-centre distance of the bowls: 700mm,
three-sided apron: 60mm
ANMW220
ANMW221
Without tap hole
With tap hole
Triple washbasin
Length of washbasin: 2100mm, bowl dimensions (LxWxH):
540x380x90mm, centre-to-centre distance of the bowls: 700mm,
three-sided apron: 60mm
ANMW230
ANMW231
+
Requires either
F0431
F0430
+
Dome waste outlet 32mm
Sieve waste outlet 32mm
Recommended
F0432
XINX140
Tel 01246 458900 | www.franke.co.uk
Without tap hole
With tap hole
Syphon cover and trap 32mm
Trap cover
66
WASHBASINS AND
WASHTROUGHS
IMAGE
WASHBASINS AND WASHTROUGHS
MIRANIT WASHBASINS
IMAGE
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
GAMBA children’s washbasin
Made from MIRANIT resin bonded mineral material, with an alpine white
gelcoat surface finish that’s smooth, pore-free and temperature resistant
up to 80°c. The molded form is round with an asymmetric tap landing with
storage space including tap hole and small rear upstand. Without overflow.
Integral back panel with integrated brackets and fixing holes for height
adjustment up to 100mm. Mounting material included (hanger bolts and
dowels).
ANMW198
+
Requires either
F0431
F0430
+
Washbasin dimensions (WxHxD):
450x110x390mm.
Rear panel height: 190mm
Dome waste outlet 32mm
Sieve waste outlet 32mm
Recommended
F0432
XINX140
Syphon cover and trap 32mm
Trap cover
LUNA children’s washbasin
Made from MIRANIT resin bonded mineral material, with an alpine white
gelcoat surface finish that’s smooth, pore-free and temperature resistant
up to 80°c. The molded form is round with a tangential cut and a slightly
swept tap landing with storage space including tap hole and small rear
upstand. Without overflow. Integral back panel with integrated brackets and
fixing holes for height adjustment up to 100mm. Mounting material included
(hanger bolts and dowels).
ANMW199
+
Requires either
F0431
F0430
+
Washbasin dimensions (WxHxD):
450x390x110mm,
Rear panel height: 190mm
Dome waste outlet 32mm
Sieve waste outlet 32mm
Recommended
F0432
XINX140
Syphon cover and trap 32mm
Trap cover
MIRANIT washbasin and drainer
Classroom sink from MIRANIT resin bonded mineral material, with an
alpine white gelcoat surface finish that’s smooth, pore-free and
temperature resistant up to 80°c. With seamless, rectangular bowl,
soap dish and sponge tray. Perforated waste with overflow DN 32,
includes mounting material. Supplied with or without tap hole. Tap not
included
ANMW320
ANMW321
No tap hole
Single tap hole
MIRANIT Repair Kit
Repair kit for products made of resin-bonded mineral material in Alpine
White. Consisting of 125 ml gelcoat, 125 ml polishing agent, 2.5 ml
hardener, A5 sheet sandpaper (grain size 1200), measuring spoon and
wooden spatula. Shelf life of 2-4 weeks if unopened. Must be used within
2 days once opened.
ZANMW904
67
Tel 01246 458900 | www.franke.co.uk
WASHBASINS AND WASHTROUGHS
BESPOKE MIRANIT WASHBASINS
ITEM NUMBER
Bowl Choice
MIRANIT Bespoke
Rectangular
Round
Oval
TYPE/MODEL
Our new bespoke range of washbasins are custom made sanitary
solutions for commercial installations.
Three different bowl shapes can be seamlessly molded into a strikingly
graceful washbasin top with a material thickness of just 18mm or 25mm
and up to 3.6m in length. There is almost no limit to the variation of ideas;
flexible washbasin length, a choice of bowl shapes, number of bowls and
bowl spacing. The different designs with or without tap landing also
provide the opportunity to include a wide range of fittings to obtain the
chosen result. You can even choose from two different materials.
Style of Washbasin
Straight
L Shape
Material Choice
D Shape
Corner Convex design
White with Gelcoat surface
Made from 80% natural minerals and approximately 20% high quality
unsaturated polyester resin. The core is surrounded by a pore-free smooth
high gloss Gelcoat layer.
- Hygienic surface finish which is temperature resistant up to 80°c
- High gloss Gelcoat layer
- Easy to repair and clean
- Durable and fracture proof
- High stability with low material thickness
Solid matte
*Not all choices of bowl shape are available in every style of washbasin.
Accessories
Made from 2/3 aluminium hydroxide (ATH) and 1/3 polyester resin
and the same colour all the way through, the matte material offers a
high level of scratch resistance.
- Easy to repair and clean
- Durable, fracture proof and scratch proof
- High stability with low material thickness
- Material coloured all the way through
Other Options
- Number of bowls
- Distance between bowls
- Length of washbasin
- Depth of washbasin
- With or without raised back edge
- Apron height
- With or without tapholes
Accessories Available
- Soap dispenser
- Towel holder
- Paper towel dispenser
- Waste disposal barrel
- Waste disposal flap
Tel 01246 458900 | www.franke.co.uk
68
WASHBASINS AND
WASHTROUGHS
IMAGE
WASHBASINS AND WASHTROUGHS
BESPOKE MIRANIT WASHBASINS
IMAGE
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
Straight Design
Washbasin – straight design, made of MIRANIT resin-bonded mineral material with
Gelcoat Alpine White glossy coating or Solid White matte material, with up to 5
seamless, molded bowls, 3 different bowl shapes, without overflow. Variable bowl
distance, available with/without apron or edges with Gelcoat coating/solid white.
Individual washbasin length, with raised edge or splashback. Washbasin thickness
25 mm (MIRANIT mineral material), 18mm (Solid material). Including brackets and
fasteners.
Material:
- Alpine White glossy
- Solid White matte
Bowl shape:
- Rectangular
(560 x 90 x 400 mm)
- Oval
(555 x 90 x 395 mm)
- Round
(410 x 90 mm)
Number of bowls: ...... (min. 1 unit, max. 5 units)
Size:
Washbasin length: ............ mm (max. 3600 mm)
- 470 mm without taphole
Washbasin depth:
- 550 mm with taphole
- 550 mm without taphole
Distance between bowls: ............ mm
Min. distance (round) 450 mm/min. distance (rectangular/oval) 600 mm
Design options:
Apron
- Right
- Left
- Front
Apron height: .........
(max. 150 mm)
Holes for:
- Without apron
Edges with Gelcoat or Solid
- Without raised edge (3 mm)
- Rear splashback: .........
(min. 10 mm, max. 100 mm)
- Soap dispenser
- Paper towel dispenser
- Waste disposal flap
- Waste disposal with Gelcoat
- Hand towel holder
- Stainless steel waste disposal
barrel
Straight Design with D Shape
Washbasin – straight design with D-shape, made of MIRANIT resin-bonded mineral
material with Gelcoat Alpine White glossy coating or Solid White matte material,
with up to 3 seamless, molded bowls, 2 different bowl shapes, without overflow.
Variable bowl distance, available with/without apron or edges with Gelcoat
coating/solid white. Individual washbasin length, with raised edge or splashback.
Washbasin thickness 25 mm (MIRANIT mineral material), 18 mm (Solid material).
Including brackets and fasteners.
Material:
- Alpine White glossy
- Solid White matte
Bowl shape:
- Oval
(555 x 90 x 395 mm)
- Round
(410 x 90 mm)
Number of bowls: ...... (min. 1 unit, max. 3 units)
Size:
Wash basin length: ............ mm (max. 3600 mm)
- 470 mm without taphole
Wash basin depth:
- 640 mm with taphole
- 640 mm without taphole
Distance between bowls: ............ mm
700 - 3600
350 - 3250
350 - 3250
35
50
20
Min. distance (oval) 600 mm/min. distance (round) 450 mm
175
470
640
395
Design options:
555
530 - 3600
265 - 3250
265 - 3250
35
50
(max. 150 mm)
20
Holes for:
160
470
640
410
69
Apron
- Right
- Left
- Front
Apron height: ............
- Without apron
Edges with Gelcoat or Solid
- Without raised edge (3 mm)
- Rear splashback: .........
(min. 10 mm, max. 100 mm)
- Soap dispenser
- Paper towel dispenser
- Waste disposal flap
- Waste disposal with Gelcoat
- Hand towel holder
- Stainless steel waste disposal
barrel
Tel 01246 458900 | www.franke.co.uk
WASHBASINS AND WASHTROUGHS
BESPOKE MIRANIT WASHBASINS
IMAGE
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
Corner Design L Shape
Washbasin – Corner design L-shaped, made of MIRANIT resin-bonded mineral
material with Gelcoat Alpine White glossy coating or Solid White matte material,
one seamless molded bowl, 3 different bowl shapes, without overflow.
Available with/without apron or edges with Gelcoat coating/solid white.
Individual washbasin length, with raised edge or splashback, washbasin
thickness 25 mm (MIRANIT mineral material), 18 mm (Solid material).
Including brackets and fasteners.
750 - 1500
35
50
400
560
555
Bowl shape:
- Rectangular
- Oval
- Round
Number of bowls: 1
(560 x 90 x 400 mm)
(555 x 90 x 395 mm)
(410 x 90 mm)
Size:
Washbasin length:
Washbasin length:
Washbasin depth:
Left side:.... mm (max. 1500 mm)
Right side: ..... mm (max. 1500 mm)
- 400 mm (round/oval basin)
- 400 mm (rectangular basin)
- With taphole
- Without taphole
Design options
Apron
- Right
- Left
- Front
Apron height: ............
400
400
50
700
1500
400
470
- Solid White matte
20
410
50
750
1500
35
50
20
395
470
55
- Alpine White glossy
700 - 1500
700 - 1500
35
50
20
Material:
700
1500
400
(max. 150 mm)
Holes for:
- Soap dispenser
- Paper towel dispenser
- Waste disposal flap
- Without apron
Edges with Gelcoat or Solid
- Without raised edge (3 mm)
- Rear splashback: .........
(min. 10 mm, max. 100 mm)
- Waste disposal with Gelcoat
- Hand towel holder
- Stainless steel waste disposal
barrel
Corner Design Convex
Washbasin – Corner design convex, made of MIRANIT resin-bonded mineral
material with Gelcoat Alpine White glossy coating or Solid White matte material,
one seamless molded bowl, 2 different bowl shapes, without overflow.
Available with/without apron or edges with Gelcoat coating/solid white.
Individual washbasin length, with raised edge or splashback. Washbasin
thickness 25 mm (MIRANIT mineral material), 18 mm (Solid material).
Including brackets and fasteners.
Material:
- Alpine White glossy
- Solid White matte
Bowl shape:
- Oval
- Round
Number of bowls: 1
(555 x 90 x 395 mm)
(410 x 90 mm)
Size Washbasin:
- 500 x 500mm
- 600 x 600mm
- 700 x 700 mm
- 800 x 800 mm
- 900 x 900 mm
- 1000 x 1000 mm
- With taphole
- Without taphole
(round bowl)
(round/oval bowl)
(round/oval bowl)
(round/oval bowl)
(oval bowl)
(oval bowl)
Design options:
Apron
- Front
500 - 800
600 - 1000
35
50
35
50
20
20
395
410
40
600
1000
500
800
45
R250
- Without apron
Edges with Gelcoat or Solid
- Apron height: ...........
(max. 150 mm)
- Without raised edge (3 mm)
- Rear splashback: .........
(min. 10 mm, max. 100 mm)
Holes for:
Tel 01246 458900 | www.franke.co.uk
- Soap dispenser
- Hand towel holder
70
WASHBASINS AND WASHTROUGHS
MIRANIT WASHTROUGHS
IMAGE
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
MIRANIT Washtrough
Made from MIRANIT resin bonded mineral material, with an alpine white
gelcoat surface finish that’s smooth, pore-free and temperature resistant
up to 80°. Washtroughs include a 32mm waste kit with overflow and tap
deck with integral back panel and fixing kit for ease of installation.
Available with 2 tapholes for 2 users (1200mm), 3 tapholes for 3 users
(1800mm) and 4 tapholes for 4 users (2400mm), with or without
splashback. There is also a choice of either self-closing or electronic,
touch free taps with all models.
Other modifications such as the inclusion of deck mounted soap
dispensers, without overflow and without tapholes are also available if
required. Please ask us for more details.
2 users – 1200mm x 480mm
SOLX1200
SOLX1200T
SOLX1200M
SOLX1200E
SOLX1200SB
SOLX1200SBM
SOLX1200SBE
With tap landing and no tapholes
With tap landing and 2 tapholes at 35mm
diameter
With tap landing and self closing taps
With tap landing and electronic touch free
taps
With splashback and no tapholes
With splashback and self closing taps
With splashback and electronic touch free
taps
3 users – 1800mm x 480mm
SOLX1800
SOLX1800T
SOLX1800M
SOLX1800E
SOLX1800SB
SOLX1800SBM
SOLX1800SBE
71
With tap landing and no tapholes
With tap landing and 3 tapholes at 35mm
diameter
With tap landing and self closing taps
With tap landing and electronic touch free
taps
With splashback and no tapholes
With splashback and self closing taps
With splashback and electronic touch free
taps
Tel 01246 458900 | www.franke.co.uk
WASHBASINS AND WASHTROUGHS
MIRANIT WASHTROUGHS
ITEM NUMBER
TYPE/MODEL
4 users – 2400mm x 480mm
SOLX2400
SOLX2400T
SOLX2400M
SOLX2400E
With tap landing and no tapholes
With tap landing and 4 tapholes at 35mm
diameter
With tap landing and self closing taps
With tap landing and electronic touch free taps
SOLX2400SB
SOLX2400SBM
SOLX2400SBE
With splashback and no tapholes
With splashback and self closing taps
With splashback and electronic touch free taps
PLEASE NOTE: For all troughs with
splashback (SB), we can offer tapholes
but the size would need to be specified
when placing an order.
TAPS USED ON MIRANIT WASHTROUGHS
Manual Taps
Electronic Taps
Deck Mounted
Splashback Mounted
Deck Mounted
Splackback Mounted
Franke Self Closing Pillar Tap for
connecting to pre-mixed warm
water AQUA201W
Franke Self Closing Bib Tap for
connecting to pre-mixed warm
water AQUA205W
See P114 for full technical details
See P114 for full technical details
Dart Valley Systems Aquarius
A45 Deck Mounted Electronic
Tap AT03-011
(re-order code F3138)
Dart Valley Systems Aquarius
Wall Mounted 150mm touch
free spout AT02-001
(re-order code F3130)
*Taps are for mains operation, battery operated are available on request.
Vanity underframe with access panels
W
NE
Colours available
Red
Yellow
Decorative solid grade 8mm laminate panels with hinges and a lock to
complete the range. The material consists of layers of kraft paper and two
decorative sides impregnated with thermosetting resin. Their strengthened
technical properties and antibacterial surface treatment makes them
particularly suitable for intensive usage (public places), areas of high
humidity (washrooms) or hygienic environments (healthcare).
Blue
Light wood
grain effect
Included:
1200mm 2 locked front panels, 2 return end panels
1800mm 3 locked front panels, 2 return end panels
2400mm 4 locked front panels, 2 return end panels
Please contact us if the washtrough is to be fitted between two walls
or into a corner. Additional colours also available on request.
Tel 01246 458900 | www.franke.co.uk
SOLX1200VR
SOLX1200VB
SOLX1200VY
SOLX1200VWG
For 1200mm MIRANIT washtrough, Red
For 1200mm MIRANIT washtrough, Blue
For 1200mm MIRANIT washtrough, Yellow
To suit 1200mm MIRANIT washtrough,
colour Light wood grain effect
SOLX2400VR
SOLX1800VB
SOLX1800VY
SOLX1800VWG
For 1800mm MIRANIT washtrough, Red
For 1800mm MIRANIT washtrough, Blue
For 1800mm MIRANIT washtrough, Yellow
For 1800mm MIRANIT washtrough,
Light wood grain effect
SOLX1800VR
SOLX2400VB
SOLX2400VY
SOLX2400VWG
For 2400mm MIRANIT washtrough, Red
For 2400mm MIRANIT washtrough, Blue
For 2400mm MIRANIT washtrough, Yellow
For 2400mm MIRANIT washtrough,
Light wood grain effect
72
WASHBASINS AND
WASHTROUGHS
IMAGE
WASHBASINS AND WASHTROUGHS
MIRANIT CHILDRENS’ WASHTROUGHS
IMAGE
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
MIRANIT children’s wash and play trough
Made from MIRANIT resin bonded mineral material, with an alpine white
gelcoat surface finish that’s smooth, pore-free and temperature resistant
up to 80°.
Our WASHINO wash and play troughs are available for 2, 3 or 4 users.
The playful wave and pleasant warm surface of the MIRANIT material are
a temptation for children to wash their hands. A high resistance to impact
and abrasion, emphasises how well these wash and play troughs are
suitable for everyday use.
The larger outer radii of the mineral granite made basins reduce the risk
of injury, whilst the generous inner radii and their seamless design make
cleaning the washtroughs an easy task.
All models are supplied with a waste and overflow as well as a tap hole
for each wash place, integrated basin back panel and mounting material
to make mounting easy.
SANW200
SANW215
SANW205
SANW211
SANW212
73
Washino 2 child play trough
Washino 3 child play trough
Washino 4 child play trough
Washino 4 child split level play trough
(right hand lower)
Washino 4 child split level play trough
(left hand lower)
Tel 01246 458900 | www.franke.co.uk
WASHBASINS AND WASHTROUGHS
WASHTROUGHS
ITEM NUMBER
TYPE/MODEL
ECN Washtrough
Left or right handed washtrough for wall mounting, stainless steel,
surface satin finished, material thickness 0.8mm, 70mm tap landing
and 40 mm rear upstand, 38mm perforated waste included, side panels
with integrated brackets, including stainless steel screws and dowels.
For lengths over 2400mm an additional bracket is required. Splashback
panel must be ordered in addition to the washtrough. All washtroughs are
delivered with no tapholes.
600-3000
L or R after the model number refers to the handing of the waste
outlet when facing the unit.
ECN6L/R
ECN12L/R
ECN15L/R
ECN18L/R
ECN21L/R
ECN24L/R
ECN30L/R
600mm washtrough with tap landing
1200mm washtrough with tap landing
1500mm washtrough with tap landing
1800mm washtrough with tap landing
2100mm washtrough with tap landing
2400mm washtrough with tap landing
3000mm washtrough with tap landing
Splashback panel manufactured from stainless steel, surface satin
finished, material thickness 0.8 mm.
ECNC6
ECNC12
ECNC15
ECNC18
ECNC21
ECNC24
ECNC30
+
Required
SU40
Tel 01246 458900 | www.franke.co.uk
600mm splashback
1200mm splashback
1500mm splashback
1800mm splashback
2100mm splashback
2400mm splashback
3000mm splashback
Additional support bracket required for
ECN30L/R
74
WASHBASINS AND
WASHTROUGHS
IMAGE
WASHBASINS AND WASHTROUGHS
SATURN WASHTROUGHS
WASHBASINS AND
WASHTROUGHS
IMAGE
ITEM NUMBER
TYPE/MODEL
Saturn washtroughs with tap landing
Manufactured from 1.2mm thick, grade 1.4301 (304) stainless steel.
Available with 2 tapholes for 2 users (1200mm), 3 tapholes for 3 users
(1800mm) and 4 tapholes for 4 users (2400mm), with or without
splashback. There is also a choice of either self-closing or electronic,
touch free taps with all models. All models come with shround and 51mm
domed brass waste outlet.
2 users – 1200mm x 415mm
SANX120
SANX120.
SANX120E
SANX120SB
SANX120SBM
SANX120SBE
With tap landing and 2 tapholes at 35mm
diameter
With tap landing and manual self closing
taps
With tap landing and electronic touch free
taps
With splashback and no tapholes
With splashback and manual self closing
taps
With splashback and electronic touch free
taps
3 users – 1800mm x 415mm
SANX180
SANX180M
SANX180E
SANX180SB
SANX180SBM
SANX180SBE
75
With tap landing and 3 tapholes at 35mm
diameter
With tap landing and manual self closing
mixer taps
With tap landing and electronic touch free
taps
With splashback and no tapholes
With splashback and manual self closing
taps
With splashback and electronic touch free
taps
Tel 01246 458900 | www.franke.co.uk
WASHBASINS AND WASHTROUGHS
SATURN WASHTROUGHS AND WUDU
ITEM NUMBER
TYPE/MODEL
4 users – 2400mm x 415mm
SANX240
SANX240M
SANX240E
SANX240SB
SANX240SBM
SANX240SBE
With tap landing and 4 tapholes at 35mm
diameter
With tap landing and manual self closing
taps
With tap landing and electronic touch free
taps
With splashback and no tapholes
With splashback and manual self closing
taps
With splashback and electronic touch free
taps
TAPS USED ON WASHTROUGHS
Manual Taps
Electronic Taps
Deck Mounted
Splashback Mounted
Deck Mounted
Splackback Mounted
Franke Self Closing Pillar Tap for
connecting to pre-mixed warm
water AQUA201W
Franke Self Closing Bib Tap for
connecting to pre-mixed warm
water AQUA205W
See P114 for full technical details
See P114 for full technical details
Dart Valley Systems Aquarius
A45 Deck Mounted Electronic
Tap AT03-011
(re-order code F3138)
Dart Valley Systems Aquarius
Wall Mounted 150mm touch
free spout AT02-001
(re-order code F3130)
*Taps are for mains operation, battery operated are available on request.
Wudu washing station
1 or 2 person wudu/ablution washing station made from 1.5mm 304
stainless steel, with a satin polish finish. Fitted with self closing tap(s)
and a 2inch domed waste. Incorporates a hinged grid to aid foot washing
and easy cleaning. Access panel at the front to enable easy access to
waste and plumbing.
L or R after the code number refers to the handing of the waste
outlet when facing the front of the wash station.
WUDU0700L/R
WUDU1200L/R
Wudu 700mm with 1 manual tap
Wudu 1200mm with 2 manual taps
Bespoke lengths are also available, along with electronic sensor
controlled taps and soap dispensers. Please ask us for more details.
Tel 01246 458900 | www.franke.co.uk
76
WASHBASINS AND
WASHTROUGHS
IMAGE
WASHBASINS AND WASHTROUGHS
SEMI CIRCULAR AND CIRCULAR WASHTROUGHS
IMAGE
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
Semi-circular and circular washtroughs
Designed to be highly durable and water efficient and to withstand
intensive use in busy environments, the semi-circular and circular
washtroughs are particular vandal resistant. Products are available for up
to 8 users with a choice of touch free infra-red controls or manually
operated self-closing taps, designed to save water and energy with
adjustable flow time. Both tap options are available with soap dispensers.
Semi-circular troughs are for mounting up to a wall and for duct mounted
or floor supply services. The large floor mounted base for the circular
troughs provides good stability. Services are fed from below and can be
accessed through a side panel which is fitted with tamper proof security
screws. The use of a single water supply and waste has a significant cost
saving compared to conventional washbasins which need a water supply
and waste for each basin. Delivered fully assembled. Junior height
version also available.
4 person semi-circular washtrough
1000x561x1205mm
SANX400
SANX405
SANX410
SANX415
With manual self closing taps*
With manual self closing taps and soap
dispensers*
With electronic touch free taps
With electronic touch free taps and soap
dispensers
6 person circular washtrough
1000x1000x1205mm
SANX600
SANX605
SANX610
SANX615
Products marked with a * contain
77
With manual self closing taps*
With manual self closing taps and soap
dispensers*
With electronic touch free taps
With electronic touch free taps and soap
dispensers
approved taps.
Tel 01246 458900 | www.franke.co.uk
WASHBASINS AND WASHTROUGHS
CIRCULAR WASHTROUGHS
ITEM NUMBER
TYPE/MODEL
WASHBASINS AND
WASHTROUGHS
IMAGE
8 person circular washtrough
1300x1300x1220mm
SANX800
SANX805
SANX810
SANX815
With manual self closing taps*
With manual self closing taps and soap
dispensers*
With electronic touch free taps
With electronic touch free taps and soap
dispensers
Junior height version also available. Please ask us for more
details.
TAPS USED ON CIRCULAR WASHTROUGHS
Electronic Tap
Manual Tap
Soap Dispenser
78mm projection wall spout with
extended threads AQRM907
Self closing bib tap for connecting to
pre-mixed warm water AQUA205W
High polished chromated brass soap dispenser
suitable for liquid soaps and lotions with a
1 litre soap tank filled from above. SD80
See P114 for full technical details
See P28 for full technical details
Washtrough with coloured base
W
NE
Film wrapped base and access panel for decorative purposes.
Choice of colours as shown.
Please ask us for more details.
Colours available
Yellow
Blue
Green
Red
Tel 01246 458900 | www.franke.co.uk
78
79
DRINKING FOUNTAINS
DRINKING FOUNTAINS
Drinking fountains are commonly found in
leisure facilities, offices, schools and other
commercial buildings. The range from
Franke Sissons provides an option suitable
for any application; wall hung or floor
standing, with or without bottle filler, our
new round drinking fountain with water filter
and chilled options too; providing an
unlimited amount of fresh chilled water.
Manufactured from stainless steel, this
range is both hard wearing and easy to
install.
PRODUCT FEATURES
- Wall hung or floor standing in a number of different models
- Filtered and chilled variants available
- Easy to install
- Replacement bubblers, bottle fillers and water filters available
Tel 01246 458900 | www.franke.co.uk
80
DRINKING FOUNTAINS
DRINKING FOUNTAINS
DRINKING FOUNTAINS
IMAGE
ITEM NUMBER
TYPE/MODEL
Centinel wall hung drinking fountain
Drinking water fountains are manufactured from grade 1.4301 (304)
austenitic stainless steel, material thickness 1.2mm, supplied complete
with 19mm waste and water bubbler. The wall mounted model is simply
fixed to the wall using a joggle strip and integral mounting brackets.
G20100N
G20109N
+
Centinel drinking fountain wall hung
310x264x135mm
Centinel drinking fountain wall hung with
bottle filler
310x264x135mm
Spares
F1037
F1042
Bubbler
Bottle Filler
Wall hung/floor standing drinking fountain
Drinking water fountains are manufactured from grade 1.4301 (304)
austenitic stainless steel, material thickness 1.2mm, supplied complete
with 19mm waste and water bubbler. The wall mounted model is simply
fixed to the wall using a joggle strip and integral mounting brackets.
The pedestal version is fixed in the same way as the wall mounted version
but incorporates extra fixing points within the pedestal support. No
screws or wall plugs supplied.
ANMX300
ANMX306
ANMX301
ANMX307
+
Spares
F1037
F1042
81
Drinking fountain wall hung
312x258x200mm
Drinking fountain wall hung with bottle filler
312x258x487mm
Drinking fountain floor standing
312x258x840mm
Drinking fountain floor standing with bottle
filler 312x258x1126mm
Bubbler
Bottle Filler
Tel 01246 458900 | www.franke.co.uk
DRINKING FOUNTAINS
DRINKING FOUNTAINS
W
NE
ITEM NUMBER
TYPE/MODEL
DRINKING FOUNTAINS
IMAGE
Easy fit wall hung drinking fountain with water filter
Manufactured from 1.2mm grade 304 stainless steel. Delivered complete
with a choice of bubbler or bubbler and bottle filler, water filter as standard,
(replacement required approximately every 6 months) fitted waste and low
inlet P trap, plumbing connections and a secure access panel.
They are mounted to the wall using a bracket that is simply fixed to the wall.
The drinking fountain then slides and hooks on and is then secured with
screws at the sides.
ANMX330
ANMX331
+
Drinking fountain wall hung with bubbler and
water filter 350x350x256mm
Drinking fountain wall hung with bubbler,
bottle filler and water filter 350x350x256mm
Spares
B9094
F1037
F1042
Chlorine Water Filter
Bubbler
Bottle Filler
Wall hung/floor standing chilled drinking fountain
The water coolers and drinking fountains from Franke offer a low maintenance
and reliable solution where chilled drinking water is required in commercial
buildings. Available with or without a bottle filler, the products are connected
direct to the water mains supply and supply an unlimited amount of chilled
water which always has a fresh taste. The product requires 240V main
electrical supply via a 3 pin plug socket.
The coolers are made from durable coated steel panels.
The products are provided with a chlorine based water filter as standard and
this is recommended to be replaced every 6 months. Replacement filters are
available from Franke Sissons.
An installation kit is included.
ANMX311
ANMX312
ANMX308
ANMX309
+
Spares
ANMX313
+
Chlorine water filter
Recommended
ANMX315
Tel 01246 458900 | www.franke.co.uk
360x432x505mm wall hung unit with water
filter
360x432x505mm wall hung unit with water
filter and bottle filler
325x328x960mm floor standing unit with
water filter
325x328x960mm floor standing unit with
water filter and bottle filler
Breeam fixing kit for ANMX308/309
82
83
GENERAL PURPOSE, BUCKET
AND UTILITY SINKS
GENERAL PURPOSE,
BUCKET AND
UTILITY SINKS
Buildings such as supermarkets,
laboratories, nursing homes, sheltered
housing and offices all require durable
sinks that maintain the high standards
of hygiene and cleanliness required.
This range of non-residential sinks and
bowls offer a wide choice of modern and
traditional styles of product for a wide
variety of installation requirements.
PRODUCT FEATURES
- 0.9mm thick austenitic grade 304 stainless steel used for the
majority of products
- Traditional 2 tap holes sinks available from stock
- Some sinks are available in acid resistant 316 material for hospital
and laboratory use (see Medical and Laboratory section)
- Wide variety of bowl and drainer combinations
- Inset bowls suitable for handwashing, plate washing or laundry use
- Wastes and fixing kits available
Tel 01246 458900 | www.franke.co.uk
84
GENERAL PURPOSE, BUCKET AND UTILITY SINKS
GENERAL PURPOSE, BUCKET
AND UTILITY SINKS
INSET SINKS
IMAGE
ITEM NUMBER
TYPE/MODEL
Single bowl/single drainer inset sink
A single bowl/single drainer sink manufactured from 0.9mm thick, grade
1.4301 (304) stainless steel, satin polish finish. The sink top is turned
down on all edges and incorporates a rimmed edge and fixing rails. Fixing
clips are provided for insetting the sink into a worktop. The bowl is
prepared for a 38mm waste. NOTE: It may be necessary to notch the
worktop when an overflow is fitted.
L or R refers to the handing of the drainer ie. left or right when
facing front of unit.
External: 1015x505x200mm bowl: 420x350x180mm
B20085L/R*
+
Required
F2119
+
B20085L
38mm waste, plug, chain and overflow
Recommended
F1026
F1081
F1083
13mm deck pattern mixer
13mm crosshead high neck pillar taps
13mm fluted handle high neck pillar taps
B20085LT/RT*
2 tapholes at 180mm centres, no overflow
+
Required
F2068
+
B20085RT
cut out size: 1000x490mm
2 tapholes at 180mm centres, with overflow
38mm CP brass flush grated waste outlet
Recommended
F1026
F1081
F1083
13mm deck pattern mixer
13mm crosshead high neck pillar taps
13mm fluted handle high neck pillar taps
*Models also available in grade 316 stainless steel. Please see Medical and Laboratory section.
85
Tel 01246 458900 | www.franke.co.uk
GENERAL PURPOSE, BUCKET AND UTILITY SINKS
IMAGE
ITEM NUMBER
TYPE/MODEL
B20085LN/RN
No tapholes, no overflow
+
Required
F2068
+
B20085LN
Recommended
13mm mixer lever taps (each)
B20085LCO/RCO
Centre taphole with overflow, LH/RH
drainer
Required
F2119
+
B20085RCO
Recommended
13mm monobloc mixer tap
13mm monobloc mixer tap with fluted
handles
B20085LT2/RT2
Tapholes at 200mm centres, no overflow, LH/
RH drainer
Required
F2068
+
F1074
B20085LT20/RT20
+
Tapholes at 200mm centres, with overflow,
LH/RH drainer
38mm waste, plug, chain and overflow
Recommended
F1074
F1075
Tel 01246 458900 | www.franke.co.uk
13mm high necked lever operated taps
(per pair)
13mm mixer lever taps (each)
Required
F2119
+
38mm CP brass flush grated waste outlet
Recommended
F1075
B20085RT20
38mm waste, plug, chain and overflow
F1059
F1087
+
B20085LT2
38mm CP brass flush grated waste outlet
F1075
+
GENERAL PURPOSE, BUCKET
AND UTILITY SINKS
INSET SINKS
13mm high necked lever operated taps
(per pair)
13mm mixer lever taps (each)
86
GENERAL PURPOSE, BUCKET AND UTILITY SINKS
GENERAL PURPOSE, BUCKET
AND UTILITY SINKS
INSET SINKS
IMAGE
ITEM NUMBER
TYPE/MODEL
Double bowl/double drainer inset sink
A double bowl/double drainer inset sink manufactured from 0.9mm thick,
austenitic stainless steel, satin polish finish. This sink has all four sides
incorporating a rimmed edge profile, particularly suitable for insetting
into a standard sized worktop. The bowls are prepared for a 38mm waste
and overflow and can be supplied with waste, plug, chain and overflow as
an extra. Two tapholes are provided, positioned centrally between the
bowls, suitable for mixer taps only. Supplied complete with fixing clips.
cut out size: 1790x490mm
B20086D
B20087D
+
Required
F2119
+
1800x500x250mm (bowl depth)
1800x500x180mm (bowl depth)
38mm waste, plug, chain and overflow
Recommended
F1026
13mm deck pattern mixer tap
Single bowl/double drainer inset sink
Manufactured from 0.7mm thick, grade 1.4301 (304) stainless steel,
polished drainer with satin bowl. This sink has all four sides incorporating
a rimmed edge profile, suitable for insetting into a standard sized
worktop. The bowl is supplied complete with 38mm waste, plug, chain
and overflow. Two tap holes are provided directly behind the sink bowl,
positioned centrally, suitable for either individual pillar taps or deck
pattern mixer tap. Supplied complete with fixing clips.
cut out size 1372x465mm
F0311
+
1392x485x160mm with waste, plug, chain
and overflow
Recommended
F1026
F1081
F1083
13mm deck pattern mixer tap
13mm crosshead high neck pillar taps
13mm fluted handle high neck pillar taps
Double bowl/single drainer inset sink
Manufactured from 0.7mm thick, grade 1.4301 (304) stainless steel,
polished drainer with satin bowl. This sink has all four sides incorporating
a rimmed edge profile, suitable for insetting into a standard sized
worktop. The bowls are supplied complete with 38mm waste and
overflow. Two tap holes are provided, positioned centrally between the
bowls, suitable for mixer taps only. Supplied complete with fixing clips.
Cut out size 1372x465mm
F0312
F0313
+
Recommended
F1026
87
1392x485x160mm left drainer with waste,
plug, chain and overflow
1392x485x160mm right drainer with waste,
plug, chain and overflow
13mm deck pattern mixer tap
Tel 01246 458900 | www.franke.co.uk
GENERAL PURPOSE, BUCKET AND UTILITY SINKS
IMAGE
ITEM NUMBER
TYPE/MODEL
Reversible single bowl, single drainer, inset sink
Reversible compact single bowl with single drainer, bright drainer/matt
bowl complete with 1 tap hole. Made from 0.6mm stainless steel.
Bowl Size - 345x395x160mm
Cut Out Size - 844x484mm
Waste Size - 38mm
F0309
+
860x500mm with waste and overflow
Recommended
F1059
F1087
13mm monobloc mixer tap
13mm monobloc mixer tap with fluted
handles
Reversible 1.5 bowl single drainer, inset sink
Reversible 1.5 bowl, single drainer complete with 1 tap hole. Bright
drainer/matt bowl. Made from 0.7mm stainless steel.
Bowl Size - 345x395x160mm
Second Bowl Size -170x320x80mm
Cut Out Size - 949x484mm
Waste Size - 38mm
F0306
+
965x500mm with waste and overflow
Recommended
F1059
F1087
13mm monobloc mixer tap
13mm monobloc mixer tap with fluted
handles
Rodan inset sink
Manufactured from grade 304, 0.9mm thick stainless steel and available in a
number of options.
All with a 180mm deep bowl and measuring 940mm x 485mm complete with a
38mm flush grated waste or a plug, chain, waste and overflow.
PRICE
F0356P
F0357P
F0353P
F0354P
F0359P
F0360P
Tel 01246 458900 | www.franke.co.uk
2 tapholes @ 180mm centres, with overflow –
Right hand drainer
2 tapholes @ 180mm centres, with overflow –
Left hand drainer
No tapholes, no overflow – Right hand drainer
No tapholes, no overflow – Left hand drainer
2 tapholes @ 200mm centres, no overflow –
Right hand drainer
2 tapholes @ 200mm centres, no overflow –
Left hand drainer
88
GENERAL PURPOSE, BUCKET
AND UTILITY SINKS
INSET SINKS
GENERAL PURPOSE, BUCKET AND UTILITY SINKS
GENERAL PURPOSE, BUCKET
AND UTILITY SINKS
UTILITY SINKS
IMAGE
ITEM NUMBER
TYPE/MODEL
Utility sink - wall mounted
Wall mounted general purpose sink manufactured from 1mm thick grade
1.4301 (304) stainless steel – satin polish finish. The sink has an angled
front rubbing board and central 38mm BSP waste fitting. Side brackets
and fixing screws supplied.
SIRX340
500x450mm – wall hung, complete
with waste
Utility sink - inset
Inset general purpose sink manufactured from 1mm thick grade 1.4301
(304) stainless steel – satin polish finish. The sink has an angled front
rubbing board and central 38mm BSP waste fitting. Fixing brackets
supplied.
SIRX342
500x450mm – inset model, complete
with waste
Utility sink
Wall mounted utility sink manufactured from 1mm stainless steel, surface
satin finished, seamless welded bowl with dimensions 420x320x170mm,
rounded edges, 38mm plug waste with plastic overflow pipe, and right
drainage, 40mm rear upstand, includes stainless steel folding grid with
rubber bumps and mounting set.
BS302
500x400x180mm wall hung utility sink
with grid
Cleaner’s sink with grid
Wall mounted cleaners sink manufactured from 0.9mm thick grade
1.4301 (304) stainless steel – satin polish finish, with anti drip edge,
hinged grating, 38mm BSP waste fitting and complete with integral wall
brackets.
WB500GV
89
500x500x160mm wall hung cleaner’s sink
with grid
Tel 01246 458900 | www.franke.co.uk
GENERAL PURPOSE, BUCKET AND UTILITY SINKS
IMAGE
ITEM NUMBER
TYPE/MODEL
Centinel janitorial unit with WRAS approved tap and PEX hoses
Floor standing janitorial unit manufactured from grade 1.4301 (304)
stainless steel, 1.2mm material thickness throughout except for lower
bowl which is 0.9mm. Supplied complete with monobloc mixer, 32mm
flush grated waste (for top wash bowl) and 38mm domed waste outlet
(for lower bowl). The janitorial unit can be fixed with 4 legs for floor
standing or part wall hung/floor standing by using only two of the front
legs or alternatively can be fitted as a wall hung unit by using the joggle
strip provided.
A HTM standard version is also available. Please see Medical section.
G20050N
+
Recommended
F7927
G20051N
F1000
+
500x570x880mm
Stainless steel bucket (11.5 litres)
Waste plumbing kit for Centinel janitorial
unit
Spares
F1000
Tap with limited swivel spout
500
Cleaner’s sink with grid and splashback
Wall mounted cleaners sink manufactured from grade 1.4301 (304)
stainless steel, material thickness 0.9mm, with splash back, hinged
grating, 38mm BSP waste fitting and complete with integral wall bracket.
WB440C-UK
436x319x490mm
Floor standing bucket sink with splashback
Floor standing bucket sink manufactured from grade 1.4301 (304)
stainless steel, material thickness 1.2mm, with splash back, hinged
grating, 38mm BSP waste fitting and complete with integral wall
brackets. The bucket sink is supported on two front legs and is held in
position by screwing the two integral wall brackets directly to the wall.
Screws and wall plugs are not supplied.
G21663N
+
Recommended
F7927
F1071
F1073
F1072
Tel 01246 458900 | www.franke.co.uk
500x517x800mm
Stainless steel bucket (11.5 litres )
Cold bib tap for bucket sinks
Hot bib tap for bucket sinks
2 x extension pieces
90
GENERAL PURPOSE, BUCKET
AND UTILITY SINKS
CLEANING AND JANITORIAL
91
MEDICAL AND LABORATORY
MEDICAL AND
LABORATORY
An extensive range of standard products
suitable for Hospital, Laboratory and
Medical applications. The Hospital
products of sluice sinks, plaster sinks,
scrub-up troughs, sink bowls and
tops and combination sluice sinks are
suitable for Hospital wards, Accident and
Emergency rooms, Operating Theatres,
Nursing Homes and Doctor’s surgeries.
PRODUCT FEATURES
- Comply with HTM64 sanitaryware guidelines
- Comply with HTM63 laboratory furniture guidelines
- Comply with the Health Building Notes (HBN 00-10, Part C)
standards
- Sink tops available in 304 and 316 stainless steel material
- Full range of fittings for the sink and sanitaryware products
- Custom made hospital and laboratory products available,
details on request
Tel 01246 458900 | www.franke.co.uk
92
MEDICAL AND LABORATORY
MEDICAL AND LABORATORY
HTM64 MEDICAL SINKS
IMAGE
ITEM NUMBER
TYPE/MODEL
SK1 - Single bowl sink
A single bowl sink manufactured from 1.2mm thick, grade 1.4301 (304)
stainless steel, satin polish finish. The sink top is turned down on all four
edges and incorporates a wet area recess. The bowl is prepared for a
38mm waste outlet.
NOTE: It is not possible to fit an overflow. The sink top can either be
mounted on wall brackets or front leg supports - see recommended list
below.
G22002N
Single bowl, no tapholes
external: 600x600x218mm
bowl: 500x400x200mm
G22002NT
Single bowl sink with 2 tapholes at 200mm
centres
external: 600x600x218mm
bowl: 500x400x200mm
+
Note: Illustration shows unit fitted with stainless steel brackets
Required
F2068
+
38mm CP brass flush grated waste outlet
Recommended
G26523L/R
G26524L/R
F1074
F1075
Stainless steel cantilever bracket pair or
Stainless steel front leg support pair
13mm high necked lever operated taps or
13mm mixer lever tap
HTM STANDARD 64
SK2 - Double bowl sink
A double bowl sink manufactured from 1.2mm thick, grade 1.4301 (304)
stainless steel, satin polish finish. The sink top is turned down on all four
edges and incorporates a wet area recess. The bowls are prepared for a
38mm waste outlet.
NOTE: It is not possible to fit an overflow. No tapholes are provided
therefore any taps to be fitted must be mounted onto the wall. The sink
top can either be mounted on wall brackets or front leg supports - see
recommended list below.
G22004N
+
Required
F2068
+
No tapholes
external: 1200x600x218
bowl: 500x400x200
38mm CP brass flush grated waste outlet
Recommended
G26523L/R
G26524L/R
F1074
F1075
Stainless steel cantilever bracket pair or
Stainless steel front leg support pair
13mm high necked lever operated taps or
13mm mixer lever tap
Note: Illustration shows unit fitted with stainless front leg supports
HTM STANDARD 64
93
Tel 01246 458900 | www.franke.co.uk
MEDICAL AND LABORATORY
IMAGE
ITEM NUMBER
TYPE/MODEL
STA Single bowl/single drainer sink
A single bowl/single drainer sink manufactured from 1.2mm thick, grade
1.4301 (304) stainless steel, satin polish finish. The sink top is turned
down on all four edges and incorporates a wet area recess. The bowl is
prepared for a 38mm waste outlet.
NOTE: It is not possible to fit an overflow. The sink top can either be
mounted on wall brackets or front leg supports - see recommended list
below.
L or R refers to the handing of the drainer ie. left or right when
facing front of unit.
G22006L/R
No tapholes
external: 1200x600x218mm
bowl: 500x400x200mm
G22006LT/RT
2 tapholes at 200mm centres
external: 1200x600x218 mm
bowl: 500x400x200mm
+
Required
F2068
+
Note: Illustration shows unit fitted with stainless steel front
leg supports. Photo shows sink with tapholes and lever taps,
both of which are extra to the standard product.
38mm CP brass flush grated waste outlet
Recommended
G26523L/R
G26524L/R
F1074
F1075
Stainless steel cantilever bracket pair or
Stainless steel front leg support pair
13mm high necked lever operated taps or
13mm mixer lever tap
HTM STANDARD 64
STB Single bowl/double drainer sink
A single bowl/double drainer sink manufactured from 1.2mm thick, grade
1.4301 (304) stainless steel, satin polish finish. The sink top is turned
down on all four edges and incorporates a wet area recess. The bowl is
prepared for a 38mm waste outlet.
NOTE: It is not possible to fit an overflow. No tapholes are provided therefore
any taps to be fitted must be mounted onto the wall. The sink top can either be
mounted on wall brackets or front leg supports - see recommended list below.
G22008D
+
Required
F2068
+
Note: All Illustrations show unit fitted with stainless steel
front leg supports
No tapholes
external: 1800x600x218mm
bowl: 500x400x200mm
38mm CP brass flush grated waste outlet
Recommended
G26523L/R
G26524L/R
F1074
F1075
Stainless steel cantilever bracket pair or
Stainless steel front leg support pair
13mm high necked lever operated taps or
13mm mixer lever tap
HTM STANDARD 64
Tel 01246 458900 | www.franke.co.uk
94
MEDICAL AND LABORATORY
HTM64 MEDICAL SINKS
MEDICAL AND LABORATORY
MEDICAL AND LABORATORY
HTM64 MEDICAL SINKS
IMAGE
ITEM NUMBER
TYPE/MODEL
STC Double bowl/single drainer sink
A double bowl/single drainer sink manufactured from 1.2mm thick, grade
1.4301 (304) stainless steel, satin polish finish. The sink top is turned
down on all four edges and incorporates a wet area recess. The bowls are
prepared for a 38mm waste outlet.
NOTE: It is not possible to fit an overflow. No tapholes are provided
therefore any taps to be fitted must be mounted onto the wall.
The sink top can be mounted on wall brackets or front leg supports see recommended list below. This sink requires three brackets or three
front leg supports.
L or R refers to the handing of the drainer ie. left or right when
facing front of unit.
G22010L/R
+
Required
F2068
Note: All Illustrations show unit fitted with stainless steel front
leg supports
HTM STANDARD 64
+
No tapholes
external: 1800x600x218mm
bowl: 500x400x200mm
38mm CP brass flush grated waste outlet
Recommended
G26528N
G26527N
F1074
F1075
Stainless steel cantilever bracket (set of 3) or
Stainless steel front leg support (set of 3)
13mm high necked lever operated taps or
13mm mixer lever tap
HTM64 Centinel janitorial unit
Floor standing janitorial unit manufactured from grade 1.4301 (304)
stainless steel, 1.2mm material thickness throughout except for lower
bowl which is 0.9mm. Supplied complete with lever operated monobloc
mixer c/w copper tails, 32mm flush grated waste (for top wash bowl) and
38mm domed waste outlet (for lower bowl). The janitorial unit can be
fixed with 4 legs for floor standing or part wall hung/floor standing by
using only two of the front legs or alternatively can be fitted as a wall
hung unit by using the joggle strip provided.
G20055N
+
Recommended
F7927
G20051N
F1014
+
Stainless steel bucket (11.5 litres)
Waste plumbing kit for Centinel janitorial
unit
Spares
F1014
Lever operated tap
HTM STANDARD 64
95
Tel 01246 458900 | www.franke.co.uk
MEDICAL AND LABORATORY
IMAGE
ITEM NUMBER
TYPE/MODEL
Single bowl/single drainer sink
A single bowl/single drainer sink manufactured from 1.2mm thick, grade
1.4301 (304) stainless steel, satin polish finish. The sink top is turned down
on all four edges and incorporates a wet area recess. The bowl is prepared for
a 38mm waste outlet.
NOTE: It is not possible to fit an overflow. The sink top can either be
mounted on wall brackets or front leg supports - see extras listed below.
L or R refers to the handing of the drainer ie. left or right when
facing front of unit.
G22045L/R
No tapholes
external: 1000x600x220mm
bowl: 400x400x180mm
G22045LT/RT
external: 1000x600x220mm
bowl: 400x400x180mm
+
Required
F2068
+
Note: All Illustrations show unit fitted with stainless steel front
leg supports. Photo shows sink with tapholes and lever taps,
both of which are extra to the standard product.
38mm CP brass flush grated waste outlet
Recommended
G26523L/R
G26524L/R
F1074
F1075
Stainless steel cantilever bracket pair or
Stainless steel front leg support pair
13mm high necked lever operated taps or
13mm mixer lever tap
HTM STANDARD 64
Single bowl/double drainer sink
A single bowl/double drainer sink manufactured from 1.2mm thick, grade
1.4301 (304) stainless steel, satin polish finish. The sink top is turned down on
all four edges and incorporates a wet area recess. The bowls are prepared for a
38mm waste outlet.
NOTE: It is not possible to fit an overflow. The sink top can either be
mounted on wall brackets or front leg supports - see extras listed below.
G22047N
No tapholes external: 1500x600x220mm
bowl: 500x400x200mm
G22047NT
2 tapholes at 200mm centres
external: 1500x600x220mm
bowl: 500x400x200mm
+
Required
F2068
Note: All Illustrations show unit fitted with stainless steel
front leg supports
HTM STANDARD 64
Tel 01246 458900 | www.franke.co.uk
+
38mm CP brass flush grated waste outlet
Recommended
G26523L/R
G26524L/R
F1074
F1075
Stainless steel cantilever bracket pair or
Stainless steel front leg support pair
13mm high necked lever operated taps or
13mm mixer lever tap
96
MEDICAL AND LABORATORY
HTM64 MEDICAL SINKS
MEDICAL AND LABORATORY
MEDICAL AND LABORATORY
HTM63 SINKS
IMAGE
ITEM NUMBER
TYPE/MODEL
Sit on sinks with radiused front edge
A range of sinks manufactured from 1.2mm thick, grade 1.4301 (304)
stainless steel, satin polish finish. Each sink profile incorporates a radiused
front edge together with a radiused internal corner at the base of the upstand.
All sink bowls are prepared for a 38mm waste outlet which can be supplied as
an extra.
All the sink units are suitable for mounting onto cabinets, front leg
supports or cantilevered brackets - see recommended listed below.
L or R after the code number refers to the handing of the drainer ie.
left or right when facing the unit.
external: 1000x650x220mm
G22048L/R
single bowl, single drainer, no tapholes
G22048LT/RT
single bowl, single drainer, with 2 tapholes at
200mm centres
G22048L/R
external: 1200x650x220mm
G22049L/R
single bowl, single drainer, no tapholes
G22049LT/RT
G22049L/R
single bowl, single drainer, with 2 tapholes at
200mm centres
external: 1800x650x220mm
G22052N
single bowl, double drainer, no tapholes
G22052NT
single bowl, double drainer, with 2 tapholes at
200mm centres
G22053N
G22053NT
double bowl, double drainer, no tapholes
double bowl, double drainer, with 2 tapholes at
200mm centres
G22052N
+
Required
F2068
+
38mm CP brass flush grated waste outlet
Recommended
G26523L/R
G26524L/R
Stainless steel cantilever bracket pair or
Stainless steel front leg support pair
G22053N
+
Recommended for G22053N
G26527N
G26528N
+
HTM STANDARD 63
97
Stainless steel front leg support
(3 required) or
Stainless steel cantilever bracket
(3 required)
Recommended for all with 2 tapholes
F1074
F1075
13mm high necked lever operated taps or
13mm mixer lever tap
Tel 01246 458900 | www.franke.co.uk
MEDICAL AND LABORATORY
IMAGE
ITEM NUMBER
TYPE/MODEL
Single bowl/single drainer inset sink - grade 316 stainless steel
A single bowl/single drainer sink manufactured from 1.2mm thick, grade
1.4404 (316) stainless steel, satin polish finish. The sink top is turned down on
all edges and incorporates a rimmed edge and fixing rails. Fixing clips are
provided for insetting the sink into a worktop. The bowl is prepared for a
38mm waste outlet only.
L or R refers to the handing of the drainer ie. left or right when facing
front of unit.
external: 1015x505x200mm, bowl: 420x350x180mm,
cut out size: 1000x490mm
B50085L/R
No tapholes, no overflow
B50085LT/RT
2 tapholes at 200mm centres, no overflow
200
B50085L
+
Required
F2039
+
B50085RT
38mm Vulcathene waste and plug,
no overflow
Recommended
F1074
F1075
13mm high necked lever operated taps
13mm mixer lever tap
B50085LC/RC
Single centre taphole, no overflow
+
Required
F2039
+
38mm Vulcathene waste and plug,
no overflow
Recommended
F1059
F1087
13mm monobloc mixer tap
13mm monobloc mixer tap with fluted handles
B50085RC
All models also available in Grade 304 stainless steel.
Please see General Purpose, Bucket and Utility Sinks section.
Tel 01246 458900 | www.franke.co.uk
98
MEDICAL AND LABORATORY
GRADE 316 STAINLESS STEEL SINKS
MEDICAL AND LABORATORY
MEDICAL AND LABORATORY
DUH HOSPITAL DISPOSAL UNITS
IMAGE
ITEM NUMBER
TYPE/MODEL
DUH hospital pattern disposal sink
A DUH hospital disposal unit manufactured from 1.2mm thick, grade
1.4301 (304) stainless steel with a satin polish finish. The top is turned
down on all four edges and incorporates a wet area recess. Fitted with a
sluice hopper at one end which can be supplied with either top inlet or
back inlet. The hopper has a 110mm dia. outlet which can accept a P or S
trap, available as an extra.
Stainless steel cisterns are available with stainless steel downpipes for
surface mounting installations. For installations where the cistern is duct
mounted a plastic cistern with plastic downpipe is available. Plastic
cisterns have a 9 litres capacity whereas the stainless steel cistern can
be 6, 7 or 9 litre capacity and all are fitted with a 13mm HP brass valve,
plastic float and CP metal flushing lever handles. The unit should only be
fed from a cistern or tank water supply.
Photograph shows front
leg supports whereas the
Illustrations show
cantilevered brackets
fitted
Unit can be mounted on either stainless steel cantilever brackets or
stainless steel front leg supports. Front leg supports give a working
height of 900mm and have adjustable feet which can be screwed to the
floor for extra stability.
L or R after the code number refers to the handing of the drainer
ie. left or right when facing front of unit.
* When a top central
entry is supplied this
dimension is 270mm
external: 1000x600x300mm sluice hopper: 375/110x300mm
G22016L/R
LH/RH drainer top 110mm outlet, back inlet
for duct mounted cisterns
G22025L/R
LH/RH drainer top 110mm outlet, top inlet
for surface mounted cisterns
+
Required support
G26523L/R
G26524L/R
+
Required trap
B4042
B4052
B4059
+
B4215
Surface mounted
Duct mounted
White plastic P trap for hospital units or
110mm Stainless steel adjustable P trap or
110mm Stainless steel adjustable S trap
Required cistern and downpipe
F3018
B3022
G20605N
+
Stainless steel cantilever bracket or
Stainless steel front leg support
For a G22016L/R 9 litre plastic cistern with
Plastic downpipe or
For a G22025L/R 6, 7 & 9 litre stainless steel
cistern with
Stainless steel downpipe
Recommended
G26542N
Stainless steel removable outlet grating
110mm
HTM STANDARD 64
99
Tel 01246 458900 | www.franke.co.uk
MEDICAL AND LABORATORY
IMAGE
ITEM NUMBER
TYPE/MODEL
DUHS hospital pattern disposal sink
A DUHS hospital disposal unit manufactured from 1.2mm thick, grade 1.4301
(304) stainless steel with a satin polish finish. The top is turned down on all
four edges and incorporates a wet area recess. Fitted with a sluice hopper at
one end which can be suitable for either a top inlet or back inlet. The hopper
has a 110mm dia. outlet which can accept a P or S trap. A wash up bowl is
positioned next to the sluice hopper and is prepared for a 38mm waste outlet,
but does not have an overflow.
Stainless steel cisterns are available with stainless steel downpipes for
surface mounting installations. For installations where the cistern is duct
mounted a plastic cistern with plastic downpipe is available. Cisterns are
all are fitted with a 13mm HP brass valve, plastic float and CP metal
flushing lever handles. The unit should only be fed from a cistern or tank
water supply.
Unit can be mounted on either stainless steel cantilever brackets or
stainless steel front leg supports. Front leg supports give a working height
of 900mm and have adjustable feet which can be screwed to the floor for
extra stability.
* When a top
central entry is
supplied this
dimension is
270mm
L or R after the code number refers to the handing of the drainer ie.
left or right when facing front of unit.
external: 1600x600x300mm, sluice hopper: 375/110x300mm,
wash bowl: 500x400x200mm
G22018L/R
LH/RH drainer 110mm outlet, back inlet for
duct mounted cisterns
G22018LT/RT
LH/RH drainer 110mm outlet, back inlet for
duct mounted cisterns with 2 tapholes at
200mm centres
G22027L/R
LH/RH drainer 110mm outlet, top inlet for
surface mounted cisterns
G22027LT/RT
LH/RH drainer 110mm outlet, top inlet for
surface mounted cisterns with 2 tapholes at
200mm centres
+
Required support
G26523L/R
G26524L/R
+
Required trap
B4042
B4052
B4059
+
Surface mounted
Duct mounted
Stainless steel cantilever bracket or
Stainless steel front leg support
White plastic P trap for hospital units or
110mm Stainless steel adjustable P trap or
110mm Stainless steel adjustable S trap
Required cistern and downpipe
F3018
B3022
G20605N
B4215
For a G22016L/R 9 litre plastic cistern with
Plastic downpipe or
For a G22025L/R 6, 7 & 9 litre stainless steel
cistern with
Stainless steel downpipe
HTM STANDARD 64
+
Required waste
F2068
+
Recommended
G26542N
F1075
F1074
Tel 01246 458900 | www.franke.co.uk
Flush grated waste
Stainless steel removable outlet grating
110mm or
13mm mixer lever tap or
13mm high necked lever operated taps
100
MEDICAL AND LABORATORY
DUHS HOSPITAL DISPOSAL UNITS
MEDICAL AND LABORATORY
MEDICAL AND LABORATORY
DUG HOSPITAL DISPOSAL UNITS
IMAGE
ITEM NUMBER
TYPE/MODEL
DUG domestic services disposal sink wall hung
A wall hung domestic services disposal unit manufactured from 1.2mm thick,
grade 1.4301 (304) stainless steel with a satin polish finish. Incorporating a sluice
hopper which is suitable for either top entry or duct mounted services. The
hopper has a 110mm dia. outlet which can accept a P trap, available as an extra.
Stainless steel cisterns are available with stainless steel downpipes for surface
mounting installations. For installations where the cistern is duct mounted a
plastic cistern with plastic downpipe is available. Plastic cisterns have 9 litres
capacity whereas the stainless steel cistern can be 6, 7 or 9 litre capacity and
all are fitted with a 13mm HP brass valve, plastic float and CP metal flushing
lever handles.
The unit should only be fed from a cistern or tank water supply. The unit is fixed
to the wall using two cantilevered brackets, available as an extra.
external: 600x600/670x300mm, sluice hopper: 375/110x300mm
G22041N
Wall hung unit 110mm outlet, back inlet for
duct mounted cisterns
G22043N
Wall hung unit 110mm outlet, top inlet for
surface mounted cisterns
Surface mounted
+
Duct mounted
Required support
G26523L/R
+
Surface mounted
HTM STANDARD 64
Required trap
B4042
B4052
Illustration shows duct mounted
unit G22041N - 600x600mm
+
Stainless steel cantilever bracket
White plastic P trap for hospital units or
110mm Stainless steel adjustable P trap
Required cistern and downpipe
F3018
B3022
G20605N
B4215
9 litre plastic cistern with
Plastic downpipe or
6, 7 & 9 litre stainless steel cistern with
Stainless steel downpipe
DUG domestic services disposal sink floor standing
A floor standing domestic services disposal unit manufactured from
1.2mm thick, grade 1.4301 (304) stainless steel with a satin polish finish.
Incorporating a sluice hopper which is suitable for duct mounted services. The
hopper has a 110mm dia. outlet which can accept a P trap, available as an extra.
A duct mounted plastic cistern with plastic downpipe is available. Plastic cisterns
have a 9 litre capacity valve, plastic float and metal flushing lever handles. The
unit should only be fed from a cistern or tank water supply. The unit is fixed to the
floor and the wall via the service duct.
external: 600x600x600mm, sluice hopper: 375/110x300mm
G22020N
Floor standing disposal sink
+
Required trap
B4042
+
Required cistern
F3018
+
9 litre plastic cistern
Required downpipe
B3022
101
White plastic P trap for hospital units
Plastic downpipe
Tel 01246 458900 | www.franke.co.uk
MEDICAL AND LABORATORY
IMAGE
ITEM NUMBER
TYPE/MODEL
PSH plaster sink
Plaster sink top manufactured from 1.2mm thick, grade 1.4301 (304)
stainless steel, with a satin polish finish whereas the bowl is from 1.5mm
material. The single bowl incorporates a plaster catcher sump which is
prepared for a 38mm waste. A plaster catcher/basket and lid is supplied
which fits into the sump in order to prevent loose plaster from entering
the waste and causing a blockage.
Illustration shows sink mounted on cantilevered brackets
No tapholes are provided so any taps to be fitted must be wall mounted.
Stainless steel cantilevered brackets or stainless steel front leg supports
can be supplied as an extra. Both these types of supports rely on a
strong wall fixing, particular when brackets are fitted. No wall fixings are
supplied. L or R after the code number refers to the handing of the
drainer ie. left or right when facing the unit.
external: 1200x600mm, bowl: 500x440x200/400mm,
G22000L/R
LH/RH plain top drainer
+
Required
F2068
+
38mm flush grated brass waste outlet
Recommended
G26523L/R
G26524L/R
F1074
F1075
Stainless steel cantilever bracket pair or
Stainless steel front leg support pair
13mm high necked lever operated taps or
13mm mixer lever tap
Plaster catcher
and lid
SUH scrub-up troughs
A range of surgeons scrub up troughs manufactured from 1.5mm thick,
grade 1.4301 (304) stainless steel, with a satin polish finish. All models are
available with a conventional waste outlet in the base of the trough for
surface mounting. The top and bottom areas of the trough are fixed to the
wall using joggle strips. Wall fixing screws and plugs are not supplied. L or
R after the code number refers to the handing of the waste outlet ie. left or
right when facing the front of the trough. Rear waste outlet version also
available, please call for details.
G22029L/R
LH/RH bottom waste outlet 800mm,
external: 800x400x400/430mm
G22030L/R
LH/RH bottom waste outlet 1600mm,
external: 1600x400x400/430mm
G22031L/R
LH/RH bottom waste outlet 2400mm,
external: 2400x400x400/430mm
+
Recommended
Special height rear upstand POA
HTM STANDARD 64
Tel 01246 458900 | www.franke.co.uk
102
MEDICAL AND LABORATORY
PLASTER SINKS AND SCRUB TROUGHS
103
CATERING SINKS, TABLES
AND EQUIPMENT
CATERING SINKS, TABLES
AND EQUIPMENT
This extensive range of commercial
equipment has been designed to
meet the needs of today’s leading
catering establishments and hotels.
PRODUCT FEATURES
- Wide range of catering sinks and manual taps to suit all
commercial kitchens
- Preparation tables
- Food waste disposal units for environmentally friendly, hygienic
disposal of food waste
Tel 01246 458900 | www.franke.co.uk
104
CATERING SINKS, TABLES AND EQUIPMENT
MINI CATERING SINKS
ITEM NUMBER
CATERING SINKS, TABLES
AND EQUIPMENT
IMAGE
TYPE/MODEL
Mini catering sinks 600mm wide - single bowl
Mini sinks are manufactured from 1.2mm thick austenitic grade stainless
steel polished to a satin finish. Single bowl sinks are all supplied with
38mm waste, plug, chain and overflow. Single bowl sinks have two holes
drilled at 180mm centres suitable for either 13mm pillar taps or mixer
taps. An earthing lug is fitted under the drainer. Stainless steel underframes complete with shelf are supplied in a flat pack form with easy to
read assembly instructions. Each leg is fitted with an adjustable foot
(-20/+10mm) with a working height of 900mm.
L or R after the code number refers to the handing of the drainer.
ie. left or right when facing the unit.
E20602L
E20601L/R
External: 1000x600mm, bowl:
400x400x250mm, single drainer
E20602L/R
External: 1200x600mm, bowl:
500x400x250mm, single drainer
E20603L/R
External: 1200x600mm, bowl:
500x400x300mm, single drainer
E20604N
External: 1500x600mm bowl:
500x400x300mm double drainer
+
Recommended
K20670N
K20671N
K20672N
F1081
F1083
F1026
+
Stand & shelf for E20601L/R
Stand & shelf for E20602L/R and E20603L/R
Stand & shelf for E20604N
13mm crosshead high neck pillar taps or
13mm fluted handle high neck pillar taps or
13mm deck pattern mixer tap
Spares
F2119
38mm waste, plug, chain and overflow
Mini catering sinks 600mm wide - double bowl
Mini sinks are manufactured from 1.2mm thick austenitic grade stainless
steel polished to a satin finish. The larger bowl is fitted with a 38mm waste,
plug, chain and overflow and the smaller outer bowl supplied with a 38mm
basket strainer waste outlet. They are both drilled for mixer taps only - see
illustrations opposite.
An earthing lug is fitted under the drainer. Stainless steel underframes
complete with shelf are supplied in a flat pack form with easy to read
assembly instructions. Each leg is fitted with an adjustable foot
(-20/+10mm) with a working height of 900mm.
E20605R
L or R after the code number refers to the handing of the drainer. ie.
left or right when facing the unit.
E20605L/R
External: 1500x600mm, bowls:
500x400x250mm
and 400x400x250mm, single drainer
E20606L/R
External: 1500x600mm, bowls:
500x400x300mm and
400x400x250mm, single drainer
E20605L & E20606L
+
Typical end elevation
Recommended
K20672N
F1026
Stand & shelf
13mm deck pattern mixer tap
Section through all models
+
Spares
F2119
F2080
105
38mm waste, plug, chain and overflow
38mm basket strainer waste
Tel 01246 458900 | www.franke.co.uk
CATERING SINKS, TABLES AND EQUIPMENT
MIDI CATERING SINKS
ITEM NUMBER
TYPE/MODEL
Midi catering sinks 650mm wide - single/double bowl
Midi sinks are manufactured from 1.2mm thick austenitic grade stainless
steel polished to a satin finish. All sinks have two tapholes behind each
bowl drilled at 180mm centres. Single bowl sinks are suitable for either
13mm pillar taps or mixer taps whereas the double bowl sinks are only
suitable for pillar taps. Bowls are all supplied with 38mm waste and
standpipe strainer overflow. An earthing lug is fitted under the drainer.
Stainless steel underframes complete with shelf are supplied in a flat pack
form with easy to read assembly instructions. Each leg is fitted with an
adjustable foot (-20/+10mm) with a working height of 900mm.
E20614D
E20608N
E20610L
L or R after the code number refers to the handing of the drainer
ie. left or right when facing the unit.
E20608N
External: 750x650mm bowl:
610x460x300mm single bowl
E20610L/R
External: 1200x650mm bowl:
610x460x300mm single bowl, single drainer
E20612L/R
External: 1500x650mm bowl:
610x460x300mm, single bowl, single drainer
E20614D
External: 1800x650mm bowl:
610x460x300mm, single bowl, double drainer
E20616L/R
External: 1800x650mm bowls:
610x460x300mm, double bowl, single drainer
E20618D
External: 2400x650mm bowls:
610x460x300mm, double bowl, double drainer
+
Recommended
K20674N
K20671N
K20672N
K20673N
K20684N
E20612L
F1081
F1083
F1026
+
Stand & shelf for E20608N
Stand & shelf for E20610L/R
Stand & shelf for E20612L/R
Stand & shelf for E20614D and E20616L/R
Stand & shelf for E20618D (This underframe
incorporates 6 legs)
13mm crosshead high neck pillar taps or
13mm fluted handle high neck pillar taps or
13mm deck pattern mixer tap
Spares
F2132
38mm waste fitting and standpipe strainer
for 300mm deep bowls
E20614D
E20616L
E20618D
Tel 01246 458900 | www.franke.co.uk
106
CATERING SINKS, TABLES
AND EQUIPMENT
IMAGE
CATERING SINKS, TABLES AND EQUIPMENT
MAGNUM CATERING SINKS
ITEM NUMBER
CATERING SINKS, TABLES
AND EQUIPMENT
IMAGE
TYPE/MODEL
Magnum catering sinks 700mm wide with 610x460mm bowl
Magnum sinks are manufactured from 1.2mm thick austenitic grade
stainless steel polished to a satin finish. Bowls are all supplied with 38mm
waste and standpipe strainer overflow. All sinks have two tapholes behind
each bowl drilled at 180mm centres. Single bowl sinks are suitable for
either 13mm pillar taps or mixer taps whereas the double bowl sinks are
only suitable for pillar taps. An earthing lug is fitted under the drainer.
Stainless steel underframes complete with shelf are supplied in a flat pack
form with easy to read assembly instructions. Each leg is fitted with an
adjustable foot (-20/+10mm) with a working height of 900mm.
E20626R
L or R after the code number refers to the handing of the drainer.
ie. left or right when facing the unit.
E20642L
E20622L
E20642L/R
External: 1200x700mm, bowl:
610x460x300mm, single bowl, single drainer
E20622L/R
External: 1500x700mm, bowl:
610x460x300mm, single bowl, single drainer
E20624D
External: 1800x700mm, bowl:
610x460x300mm, single bowl, double drainer
E20626L/R
External: 1800x700mm, bowls:
610x460x300mm, double bowl, single drainer
E20628D
External: 2400x700mm, bowls:
610x460x300mm, double bowl, double drainer
+
Recommended
K20671N
K20672N
K20673N
K20684N
F1081
F1083
F1026
E20624D
+
Stand & shelf for E20642L/R
Stand & shelf for E20622L/R
Stand & shelf for E20624D and E20626L/R
Stand & shelf for E20628D (This underframe
incorporates 6 legs)
13mm crosshead high neck pillar taps or
13mm fluted handle high neck pillar taps or
13mm deck pattern mixer tap
Spares
F2132
38mm waste fitting and standpipe strainer
for 300mm deep bowls
E20626L
E20628D
Section through all models
Typical end elevation
107
Tel 01246 458900 | www.franke.co.uk
CATERING SINKS, TABLES AND EQUIPMENT
PREPARATION TABLES
ITEM NUMBER
TYPE/MODEL
Preparation wall tables 600, 650 and 700mm wide
Mini wall tables will align with the Mini range of catering sinks. Mini wall
tables are manufactured from 1.2mm thick austenitic grade stainless steel
polished to a satin finish. Stainless steel underframes complete with shelf
are supplied with each table, in a flat pack form with easy to read
assembly instructions. Each leg is fitted with an adjustable foot
(-20/+10mm) with a working height of 900mm.
Mini wall table 600mm wide with stand and shelf
F20619Z
600x600mm
F20600Z
900x600mm
F20601Z
1200x600mm
F20602Z
1500x600mm
F20603Z
1800x600mm
F20601Z
Midi wall table 650mm wide with stand and shelf
F20620Z
600x650mm
F20604Z
900x650mm
F20605Z
1200x650mm
F20606Z
1500x650mm
F20607Z
1800x650mm
F20619Z/F20620Z
Typical end elevation 600mm
F20600Z/F20604Z/
F20608Z
Magnum wall table 700mm wide with stand and shelf
F20608Z
900x700mm
F20609Z
1200x700mm
F20610Z
1500x700mm
F20611Z
1800x700mm
F20601Z/F20605Z/
F20609Z
Typical end elevation 650mm
F20602Z/F20606Z/
F20610Z
F20603Z/F20607Z/
F20611Z
Typical end elevation 700mm
Centre tables and special length tables
Four lengths of centre tables, all 650mm wide compliment the standard
wall tables. All the tables are manufactured from 1.2mm thick austenitic
grade stainless steel polished to a satin finish. Stainless steel underframes
complete with shelf are supplied with each table, in a flat pack form with
easy to read assembly instructions. Each leg is fitted with an adjustable
foot (-20/+10mm) with a working height of 900mm.
Centres tables with stand and shelf
F20612Z
900x650mm
F20613Z
1200x650mm
F20614Z
1500x650mm
F20615Z
1800x650mm
650
900/1200/1500/1800
Tel 01246 458900 | www.franke.co.uk
108
CATERING SINKS, TABLES
AND EQUIPMENT
IMAGE
CATERING SINKS, TABLES AND EQUIPMENT
SHELVES AND WASTE DISPOSAL UNITS
ITEM NUMBER
CATERING SINKS, TABLES
AND EQUIPMENT
IMAGE
TYPE/MODEL
Wall shelves
Manufactured from 1.2mm thick grade 1.4016 (430) stainless steel
polished to a satin finish. All the shelves have integral triangular shaped
wall brackets at each end. The brackets incorporate 2 fixing holes and
together with the fixing holes provided in the upstand make for a strong
and durable fastening to the wall. (Screws and plugs are not supplied).
Ensure that the correct fixings are used to suit the type of wall. Additional
loose fitting brackets are supplied for extra strength.
F10512N
600/900/1200/1500/1800
300
Stainless steel, brackets: 2, max load: 25kg
F10511N
600x300mm
F10512N
900x300mm
Stainless steel, brackets: 3, max load: 50kg
F10513N
1200x300mm
F10514N
1500x300mm
Section
Front elevation
Stainless steel, brackets: 4, max load: 75kg
F10515N
1800x300mm
Microwave shelf
Brackets underneath
F10510N
Upturned brackets
Manufactured from 1.2mm thick grade EN 1.4301 (304) stainless steel
polished to a satin finish. Two triangular wall brackets are supplied with
each shelf, which fasten to the shelf using two nuts and bolts supplied.
Once the brackets are attached they are then screwed to the wall using
the correct screws and plugs to suit the type of wall (screws and plugs are
not supplied). The shelf can either be supported from underneath or
alternatively hung from the brackets, depending upon the installation and
size of the microwave. The brackets can also be positioned so that a
20mm gap at the rear can be left for the passage of cables. Fixing
instructions are provided with each shelf.
Stainless steel, brackets: 2, max load: 25kg
F10510N
600x500mm
Plan
Front
elevation
End
elevations
Sink fitting waste disposal units
The sink fitting waste disposal units are designed to fit into an 89mm
waste outlet. The motor is activated using the wall mounted control box
supplied.
H50751S
H50753S
+
H50751S
Wall Mounted
Control Box
Front elevation
Recommended
F1011
+
Pry bar for Whirl-A-Waste units
Spares
B2085
B2087
109
0.75hp Sink fitting waste disposal unit,
1 phase
0.75hp Sink fitting waste disposal unit,
3 phase
Replacement motors: Waw motor grinder
0.75hp 1 phase
Replacement motors: Waw motor grinder
0.75hp 3 phase
Tel 01246 458900 | www.franke.co.uk
CATERING SINKS, TABLES AND EQUIPMENT
TAPS
ITEM NUMBER
TYPE/MODEL
CATERING SINKS, TABLES
AND EQUIPMENT
IMAGE
Bib taps for wall mounting
Manufactured from chromium plated brass the 13mm bib taps are
designed for mounting through a wall. In order to gain extra clearance
under the spout an extension tube is available.
F1071
F1073
+
13mm cold bib tap
13mm hot bib tap
Recommended
F1072
13mm extension for above bib taps
Basin taps
13mm basin taps manufactured from chromium plated brass and conform
to BS5412 standard, kitemarked and tested to 200,000 operations.
F1080
F1082
13mm basin taps with crosshead handles
– per pair
13mm basin taps with fluted handles
– per pair
F1082
Optima Adriatic basin taps
F1329
Adriatic basin taps with 3" levers
Sink pillar taps
A range of pillar taps, with varying handle design to suit specific
applications where appearance or ease of grip are a relevant selection
criteria. All of the pillar taps are manufactured from chromium plated
brass. F1035 and F1036 (19mm connections) are ideal for the larger sink
and they have crosshead handles which are more appropriate for use when
the hands are wet, whereas the F1081 (13mm) and F1083 (13mm) are
suited to smaller sinks and are fitted with crosshead and fluted handles
respectively.
F1081
F1083
F1081/F1083
F1035
F1036
13mm pillar taps with crosshead handles
– per pair
13mm pillar taps with fluted handles
– per pair
19mm hot pillar tap with crosshead handles
19mm cold pillar tap with crosshead handles
Self closing push tap
Deck mounted self closing manual push taps
F1053
F1054
Tel 01246 458900 | www.franke.co.uk
Self closing manual push tap - cold
Self closing manual push tap - hot
110
CATERING SINKS, TABLES AND EQUIPMENT
TAPS
ITEM NUMBER
CATERING SINKS, TABLES
AND EQUIPMENT
IMAGE
Lever operated pillar taps
Manufactured from chromium plated brass the pillar taps are supplied with
150mm long levers which can be operated by either the elbows or wrists,
using a quarter turn action. A wall mounted elbow is available as an extra.
WRC approved.
F1074
TYPE/MODEL
13mm lever operated pillar taps
Optima Adriatic high neck basin taps
F1330
Deck pattern mixer tap
Adriatic high neck lever taps with 3" levers
Manufactured from chromium plated brass the 13mm deck pattern mixer
is ideal for the small style sink. The swivel spout allows water to flow into
both bowls when fitted centrally between the sink bowls. Complete with
fluted handles which are moulded to give a comfortable and easy
operation. The mixer tap can be fitted to any suitable sink top drilled for
tapholes at 180mm centres. WRC approved.
F1026
13mm deck pattern tap
Optima Adriatic deck mixer tap
F1331
Adriatic deck mixer with 3" levers
Monobloc mixer tap
Manufactured from chromium plated brass the 13mm monobloc mixer tap
is ideal for those locations where there is only a single taphole available.
The operation of the F1059 monobloc mixer tap is carried out by a quarter
turn ceramic disc which ensures a longer working life. WRC approved.
F1059 13mm monobloc mixer tap
111
Tel 01246 458900 | www.franke.co.uk
CATERING SINKS, TABLES AND EQUIPMENT
TAPS
ITEM NUMBER
TYPE/MODEL
Monobloc mixer tap with fluted handles
Manufactured from chromium plated brass the 13mm monobloc mixer tap
is ideal for those locations where there is only a single taphole available.
The tap is fitted with fluted handles, for both comfort and ease of use.
F1087
13mm monobloc mixer tap with fluted
handles
Lever operated mixer tap
Manufactured from chromium plated brass the mixer tap is supplied with
150mm long levers which can be operated by either the elbows or wrists,
using a quarter turn action. Suitable for use with tapholes between 165
- 240mm centres.
F1075
13mm lever operated mixer tap
Overhead sprays
381
1016
Spring
102
Wall bracket
10 Pipe
95
229
Finger hook
with screw
Manufactured from chromium plated brass, both are suited for those
locations where there is a need for a thorough rinsing of utensils and
crockery in dishwashing areas. F1061 monobloc spray is designed to be
fitted into a single taphole behind the bowl whereas the F1062 deck mixer
spray fits into taphole centres of 180mm. Both models are supplied
complete with spray valve and 150mm wall bracket. Suitable for temperatures up to 130°F. WRC approved.
F1061
F1062
185 Extension
196
Monobloc overhead spray
Deck pattern mixer overhead spray
381
1016
Spring
140
229
102
Wall bracket
10 Pipe
178
185 Extension
317 max
Knee operated valve and spout
The knee operated valve can be fitted at any height to suit the operator interconnecting pipework is not included. The inlet and outlet connections
are for 15mm compression fittings. The spout can be fitted through any
standard sized taphole.
F1076
F1007
Knee operated valve
Spout
F1076
Tel 01246 458900 | www.franke.co.uk
112
CATERING SINKS, TABLES
AND EQUIPMENT
IMAGE
OTHER TAPS IN THE FRANKE RANGE
TAPS
IMAGE
ITEM NUMBER
TYPE/MODEL
Self-closing single mixer tap
AQUAMIX-C. With aerator and integrated flow controller, for connecting to
the hot and cold water supply. Self-closing mixing cartridge, piston-free
design, with automatic and backlash-free closure. Adjustable flow duration.
With finely adjustable and twist-proof temperature stop. Full metal
construction, polished chromium-plated brass. Choice of connecting hoses
or connecting pipes and anti-blocking system (ABS) for safety switch-off
when actuated continuously (connecting pieces with integrated non-return
valves and dirt strainers). Minimum 1 bar water pressure required.
AQUA202
AQUA202L
AQUA202/202L/202P
AQUA202/202L
AQUA202/202P
AQUA212
AQUA202P
AQUA212P
+
With connecting hoses and dynamic water
pressure above 1 bar
With connecting hoses and dynamic water
pressure between 0.5 and 1 bar
With connecting hoses and ABS function
With connecting pipes
With connecting pipes and ABS function
Recommended
Z-AQUA001
Installation set for faster connecting pipe
Self-closing pillar tap
AQUALINE C. With aerator and integrated flow controller, for connecting to
cold water or pre-mixed warm water. Self-closing functional cartridge,
piston-free design, with automatic and backlash-free closure. Adjustable flow
duration. Full metal construction, with twist-proof operating element,
polished chromium-plated brass. Minimum 1 bar water pressure required.
Option of anti-blocking system (ABS) for safety switch-off when activated
continuously.
For connecting to cold water:
AQUA203
With dynamic water pressure above 1 bar
AQUA203L
With dynamic water pressure between 0.5
and 1 bar
AQUA213
With ABS function
For connecting to pre-mixed warm water:
AQUA203W
With dynamic water pressure above 1 bar
AQUA203WL
With dynamic water pressure between 0.5
and 1 bar
AQUA213W
With ABS function
AQUA203/203L/203W/203WL
+
Recommended
Z-AQUA001
Installation set for faster connecting pipe
Self-closing single mixer tap
AQUAMIX-S. With aerator and integrated flow controller, for connecting to
the hot and cold water supply. Self-closing mixing cartridge, piston-free
design, with automatic and backlash-free closure. Adjustable flow duration,
finely adjustable and twist-proof temperature stop. Full metal construction,
polished chromium-plated brass. Choice of connecting hoses or connecting
pipes and anti-blocking system (ABS) for safety switch-off when actuated
continuously (connecting pieces with integrated non-return valves and dirt
strainers). Minimum 1 bar water pressure required.
AQUA200
AQUA210
AQUA200P
AQUA210P
AQUA200/200P
+
Recommended
Z-AQUA001
113
With connecting hoses
With connecting hoses and ABS function
With connecting pipes
With connecting pipes and ABS function
Installation set for faster connecting pipe
Tel 01246 458900 | www.franke.co.uk
OTHER TAPS IN THE FRANKE RANGE
TAPS
IMAGE
ITEM NUMBER
TYPE/MODEL
Self-closing pillar tap
AQUALINE-S. With aerator and flow straightener. Choice of connecting to
cold water or pre-mixed warm water. Self-closing functional cartridge,
piston-free design, with automatic and backlash-free closure. Adjustable
flow duration. Full metal construction, polished chromium-plated brass.
Minimum 1 bar water pressure required. Optional: With anti-blocking
system (ABS) for safety switch-off when actuated continuously.
AQUA201
AQUA211
For connecting to cold water
For connecting to cold water and ABS function
AQUA201W
AQUA211W
For connecting to pre-mixed warm water
For connecting to pre-mixed warm water and
ABS function
+
AQUA201/201W
Recommended
Z-AQUA001
Installation set for faster connecting pipe
Self-closing bib tap
AQUALINE-S. With angled outlet and aerator with flow straightener. Choice
of connecting to cold water or pre-mixed warm water. Self-closing
functional cartridge, piston-free design, with automatic and backlash-free
closure. Adjustable flow duration. Full metal construction, polished
chromium-plated brass. Minimum 1 bar water pressure required. Optional:
With anti-blocking system (ABS) for safety switch-off when actuated
continuously.
AQUA205
AQUA215
AQUA205W
AQUA215W
+
For connecting to cold water
For connecting to cold water and ABS function
For connecting to pre-mixed warm water
For connecting to pre-mixed warm water and
ABS function
Recommended
Z-AQUA002
Z-AQUA003
Extension adaptor (30mm)
Rosette for compensating length for valve
alignment function and for covering gaps
AQUA205/205W
PROTRONIC-S tap
PROTRONIC-S mains-independent, opto-electronically-controlled
washbasin mixer DN15 with theft-proof aerator with integrated flow rate
regulator.
AQUA130
AQUA131
AQUA134
AQUA135
+
AQUA130/131
Recommended
Z-AQUA090P
Z-AQUA090PD
Tel 01246 458900 | www.franke.co.uk
Protonic S tap for battery operation
Protonic S tap for pre-mix water for battery
operation
Protonic S tap for electrical operation
Protonic S tap for pre-mix water and electrical
operation
Copper tail and check valve for pre-mix
water taps
Copper tail and check valve for mixer taps
114
INDEX
IN ALPHABETICAL ORDER BY PRODUCT CODE
INDEX
PRODUCT CODE
AL300HD
ANMW198
ANMW199
ANMW210
ANMW211
ANMW220
ANMW221
ANMW230
ANMW231
ANMW320
ANMW321
ANMW410
ANMW411
ANMW420
ANMW421
ANMW430
ANMW431
ANMX020
ANMX205
ANMX206
ANMX212
ANMX216
ANMX300
ANMX301
ANMX306
ANMX307
ANMX308
ANMX309
ANMX311
ANMX312
ANMX313
ANMX315
ANMX330
ANMX331
AQFX0006
AQFX0007
AQRE432
AQUA130
AQUA131
AQUA134
AQUA135
AQUA200
AQUA200P
AQUA201
AQUA201W
AQUA202
AQUA202L
AQUA202P
AQUA203
AQUA203L
AQUA203W
AQUA203WL
AQUA205
AQUA205W
AQUA210
AQUA210P
AQUA211
AQUA211W
AQUA212
AQUA212P
115
PAGE NUMBER
52
67
67
66
66
66
66
66
66
67
67
65
65
65
65
65
65
64
60
59
59
59
81
81
81
81
82
82
82
82
82
82
82
82
15
16
19
114
114
114
114
113
113
114
114
113
113
113
113
113
113
113
114
114
113
113
114
114
113
113
PRODUCT CODE
AQUA213
AQUA213W
AQUA215
AQUA215W
AQUA555
AQUA557
ARTW410
B20085L
B20085LCO
B20085LN
B20085LT
B20085LT2
B20085LT2O
B20085R
B20085RCO
B20085RN
B20085RT
B20085RT2
B20085RT2O
B20086D
B20087D
B2085
B2087
B3022
B4042
B4052
B4059
B4215
B50085L
B50085LC
B50085LT
B50085R
B50085RC
B50085RT
B9094
BR300OU
BRC390SF
BRP390
BS204
BS205
BS205-M
BS302
BS400
BS677
C20120N
C20132N
C20133N
C20136L
C20136R
C20137N
C20148N
C20149N
C20150N
C20166N
C20174N
C20175N
CHRX670
CMPX136
CMPX137
CMPX401
PAGE NUMBER
113
113
114
114
15
15
50
85
86
86
85
86
86
85
86
86
85
86
86
87
87
109
109
99
99
99
99
99
98
98
98
98
98
98
82
56
60
60
62
62
62
89
18
29
58
58
58
58
58
58
58
58
58
62
58
58
29
19
20
18
PRODUCT CODE
CMPX404
CMPX502N
CMPX503N
CMPX538CD
CMPX538P
CMPX538WFP
CMPX560
CMPX592
CMPX592B
CMPX592G
CMPX592S
CMPX592W
CMPX597
CMPX597B
CMPX597G
CMPX597S
CMPX597W
CNTX300N
CNTX450N
CNTX600N
CNTX73B
CNTX91
D20140N
D20142N
D20144N
D20161N
D20162N
D20163N
D20164N
D20167N
D20168N
D20170N
D20171N
D20184N
D20185N
D20186N
D20187N
D20188N
D20195N
D20196N
D20197N
D20198N
D20200N
DIU01
E20601L
E20601R
E20602L
E20602R
E20603L
E20603R
E20604N
E20605L
E20605R
E20606L
E20606R
E20608N
E20610L
E20610R
E20612L
E20612R
PAGE NUMBER
18
18
18
19
19
20
19
15
15
15
15
15
15
15
15
15
15
23
23
23
23
52
56
56
56
61
61
62
61
60
60
56
57
63
61
61
62
61
61
61
62
61
63
18
105
105
105
105
105
105
105
105
105
105
105
106
106
106
106
106
Tel 01246 458900 | www.franke.co.uk
INDEX
IN ALPHABETICAL ORDER BY PRODUCT CODE
E20614D
E20616L
E20616R
E20618D
E20622L
E20622R
E20624D
E20626L
E20626R
E20628D
E20642L
E20642R
E-BS602E
E-CMPX531
PAGE NUMBER
106
106
106
106
107
107
107
107
107
107
107
107
33
20
ECNC6
ECN6L
ECN6R
ECNC12
ECN12L
ECN12R
ECNC15
ECN15L
ECN15R
ECNC18
ECN18L
ECN18R
ECNC21
ECN21L
ECN21R
ECNC24
ECN24L
ECN24R
ECNC30
ECN30L
ECN30R
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
E-RODX605
E-RODX607
E-XINX606
E-XINX608
E-XINX616
F0306
F0309
F0311
F0312
F0313
F0353P
F0354P
F0356P
F0357P
F0359P
F0360P
F0375
F0430
F0431
F0432
F0440
F0441
F0442
30
30
48
48
28
88
88
87
87
87
88
88
88
88
88
88
50
65
65
65
50
50
50
Tel 01246 458900 | www.franke.co.uk
PRODUCT CODE
F0443
F0446
F1000
F1007
F1010
F1011
F1014
F1015
F1026
F1035
F1036
F1037
F1042
F10510N
F10511N
F10512N
F10513N
F10514N
F10515N
F1053
F1054
F1059
F1061
F1062
F1071
F1072
F1073
F1074
F1075
F1076
F1080
F1081
F1082
F1083
F1087
F1102
F1103
F1104
F1106
F1108
F1329
F1330
F1331
F1390
F1391
F1392
F1393
F2000
F2039
F20600Z
F20601Z
F20602Z
F20603Z
F20604Z
F20605Z
F20606Z
F20607Z
F20608Z
F20609Z
F20610Z
PAGE NUMBER
50
50
90
112
63
109
95
63
111
110
110
81
81
109
109
109
109
109
109
110
110
111
112
112
110
110
110
111
112
112
110
110
110
110
112
19
19
19
20
20
110
111
111
50
50
50
50
20
98
108
108
108
108
108
108
108
108
108
108
108
PRODUCT CODE
F20611Z
F20612Z
F20613Z
F20614Z
F20615Z
F20619Z
F20620Z
F2068
F2080
F2109
F2110
F2111
F2117
F2119
F2126
F2132
F3017
F3018
F3019
F3020
F3022
F3035
F3036
F3038
F3042
F7261
F7927
FH68
G20050N
G20051N
G20055N
G20100N
G20109N
G20117N
G20118N
G20119N
G20120N
G20121N
G20122N
G20123N
G20124N
G20125L
G20125R
G20126L
G20126R
G20131N
G20476N
G20480N
G20482N
G20604N
G20605N
G20606N
G20607N
G20608N
G21663N
G21743N
G21743NT
G22000L
G22000R
G22002N
PAGE NUMBER
108
108
108
108
108
108
108
86
105
55
18
18
56
58
55
106
22
22
22
22
22
22
22
22
18
23
90
29
90
90
95
81
81
19
19
19
19
19
19
19
19
20
20
20
20
60
64
64
64
22
99
22
22
22
90
16
16
102
102
93
116
INDEX
PRODUCT CODE
INDEX
IN ALPHABETICAL ORDER BY PRODUCT CODE
INDEX
PRODUCT CODE
G22002NT
G22004N
G22006L
G22006LT
G22006R
G22006RT
G22008D
G22010L
G22010R
G22016L
G22016R
G22018L
G22018LT
G22018R
G22018RT
G22020N
G22025L
G22025R
G22027L
G22027LT
G22027R
G22027RT
G22029L
G22029R
G22030L
G22030R
G22031L
G22031R
G22041N
G22043N
G22045L
G22045LT
G22045R
G22045RT
G22047N
G22047NT
G22048L
G22048LT
G22048R
G22048RT
G22049L
G22049LT
G22049R
G22049RT
G22052N
G22052NT
G22053N
G22053NT
G22080N
G26523L
G26523R
G26524L
G26524R
G26527N
G26528N
G26542N
GFPX100W
GFPX120G
GFPX180G
GFPX240G
117
PAGE NUMBER
93
93
94
94
94
94
94
95
95
99
99
100
100
100
100
101
99
99
100
100
100
100
102
102
102
102
102
102
101
101
96
96
96
96
96
96
97
97
97
97
97
97
97
97
97
97
97
97
16
93
93
93
93
95
95
99
21
21
21
21
PRODUCT CODE
GRBX101B
GRBX101W
GRBX103BP
GRBX103WP
GRBX105BP
GRBX105WP
GRBX106BP
GRBX106WP
GRBX107BP
GRBX107WP
GRBX201B
GRBX201W
GRBX206BP
GRBX206WP
GRBX207BP
GRBX207WP
GRBX301B
GRBX301W
GRBX401B
GRBX401W
GRBX501B
GRBX501W
GRBX601B
GRBX601W
GRBX701B
GRBX701W
GRBX801B
GRBX801W
GRBXCBP
GRBXCWP
GRBXEBP
GRBXEWP
H50751S
H50753S
HDTX450P
HDTX460
HDTX538P
HDTX538WFP
HDTX592
HDTX592B
HDTX592S
HDTX597
HDTX597B
HDTX597S
HDTX599
HDTX674
HDTX692
HDTX693
K20670N
K20671N
K20672N
K20673N
K20674N
K20684N
LP21
M500HD
M600HD
RH140HD
RH320
RNDH200
PAGE NUMBER
23
23
24
24
24
24
24
24
24
24
23
23
24
24
24
24
23
23
23
23
23
23
23
23
23
23
23
23
16
16
16
16
109
109
64
64
19
20
17
17
17
17
17
17
17
51
52
52
105
105
105
106
106
106
63
52
52
51
51
55
PRODUCT CODE
RNDH260
RNDH300
RNDH360
RNDH381
RNDH420
RNDH450-0
RNDH451-0
RNDX200
RNDX260
RNDX300
RNDX360
RNDX381
RNDX420
RNDX450-0
RNDX451-0
RODX191
RODX310
RODX600
RODX600E
RODX600ME
RODX600TT
RODX601
RODX602
RODX602E
RODX604
RODX604E
RODX605
RODX605E
RODX605EE
RODX605S
RODX605SL
RODX605TT
RODX606
RODX606E
RODX607
RODX607TT
RODX608
RODX611
RODX612
RODX612E
RODX616
RODX617
RODX617E
RODX618
RODX618E
RODX619
RODX619E
RODX625
RODX630
RODX672
RODX672E
RODX687
SANW200
SANW205
SANW211
SANW212
SANW215
SANX120
SANX120E
SANX120M
PAGE NUMBER
55
55
55
55
55
57
57
55
55
55
55
55
55
57
57
29
36
29
32
32
33
31
31
35
30
34
30
34
34
30
30
33
30
34
30
33
30
30
30
34
28
31
35
28
32
28
32
36
36
29
34
31
73
73
73
73
73
75
75
75
Tel 01246 458900 | www.franke.co.uk
INDEX
IN ALPHABETICAL ORDER BY PRODUCT CODE
PAGE NUMBER
PRODUCT CODE
PAGE NUMBER
SANX120SB
SANX120SBE
SANX120SBM
SANX180
SANX180E
SANX180M
SANX180SB
SANX180SBE
SANX180SBM
SANX240
SANX240E
SANX240M
SANX240SB
SANX240SBE
SANX240SBM
SANX400
SANX405
SANX410
SANX415
SANX600
SANX605
SANX610
SANX615
SANX800
SANX805
SANX810
SANX815
SD110
SD300
SD80
SIRX340
SIRX342
SO10L
SO1L
SOLX1200
SOLX1200E
SOLX1200M
SOLX1200SB
SOLX1200SBE
SOLX1200SBM
SOLX1200T
SOLX1200VB
SOLX1200VR
SOLX1200VWG
SOLX1200VY
SOLX1800
75
75
75
75
75
75
75
75
75
76
76
76
76
76
76
77
77
77
77
77
77
77
77
78
78
78
78
28
51
28
89
89
28
28
71
71
71
71
71
71
71
72
72
72
72
71
SOLX1800E
SOLX1800M
SOLX1800SB
SOLX1800SBE
SOLX1800SBM
SOLX1800T
SOLX1800VB
SOLX1800VR
SOLX1800VY
SOLX1800VWG
SOLX2400
SOLX2400E
SOLX2400M
SOLX2400SB
SOLX2400SBE
SOLX2400SBM
SOLX2400T
SOLX2400VB
SOLX2400VR
SOLX2400VY
SOLX2400VWG
STRX210
STRX600
STRX600E
STRX601
STRX601E
STRX602E
STRX605
STRX605E
STRX607
STRX608
STRX611
STRX611E
STRX616
STRX618
STRX619
STRX619E
STRX624
STRX625
STRX630
STRX635
STRX637
STRX670
STRX671E
STRX671L
STRX672
71
71
71
71
71
71
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
45
39
42
41
44
44
40
43
40
40
40
43
38
38
38
42
41
45
45
39
39
40
42
40
39
Tel 01246 458900 | www.franke.co.uk
PRODUCT CODE
STRX672E
STRX673E
STRX687
STRX692
STRX694
SU40
TD350
WB240WM
WB440C-UK
WB500GV
WT500A
WT500A-M
WT600A
WT600A-M
WUDU0700L
WUDU0700R
WUDU1200L
WUDU1200R
XINX140
XINX210
XINX600
XINX605
XINX606
XINX608
XINX616
XINX617
XINX625
XINX630
XINX672
XINX677
XINX687
ZANMW904
Z-AQUA001
Z-AQUA002
Z-AQUA003
Z-AQUA090P
Z-AQUA090PD
Z-CMPX001
Z-CMPX400
ZGFPX001
ZGFPX002
ZGFPX003
ZGFPX004
ZGFPX005
PAGE NUMBER
43
42
41
41
41
74
51
61
90
89
62
62
62
62
76
76
76
76
65
49
47
48
48
48
47
47
49
49
48
47
48
67
113
114
114
114
114
18
18
21
21
21
21
21
118
INDEX
PRODUCT CODE
Franke Sissons
Carrwood Road
Sheepbridge
Chesterfield S41 9QB
England
Tel. +44 (0)1246 450255
Fax +44 (0)1246 451276
Email: ws-info.uk@franke.com
Web: www.franke.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising