CRYSTORAMA 1064-CH-CL-MWP Traditional Crystal 4 Light Crystal Mini Chandelier Instruction manual
Crystorama 1064-CH-CL-MWP is a damp-rated chandelier that provides warm and inviting illumination. It accommodates four candelabra base bulbs (40-watt recommended, 60-watt maximum) and features a stylish crystal design. Installation is relatively easy and can be completed in a few steps. For extended use, LED bulbs are recommended.
Advertisement
Advertisement
A
A
B
15"
Crystorama.com
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL # 1064-CH-CL-MWP
WARNING:
Electrical Danger Turn Power Off
All electrical components must be installed by a licensed electrician in accordance with the National
Electric Code and the appropriate local electrical codes
You will need 4- Candelabra Base Bulb
40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
The fixture is Damp rated
HOW TO INSTALL:
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
1. Place the bottom bobeche and dish over the
distributor box and secure with finial.
2. Attach the mounting bar onto the outlet box.
3. Decide the desired hanging height and adjust
the chain to the correct length.
4. Raise the fixture up and do the wire connection.
Attach the canopy over the mounting bar and
secure with collar ring.
5. Place the bobeche over the socket.
6. Dress the crystal as illustrated.
Crystal Sets
A. 24Sets. (1)14mm + AS20-1.5"
B. 1 Sets. (1)AS8-30mm Ball
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
D
C
G
E
F
Crystorama.com
LIGHTING THE WAY FOR SIXTY YEARS
PART NUMBER MODEL# 1064-CH-CL-MWP
Outlet Box
B
A
Part Number
Part Numbers
A. (1)-Mounting hardware
Wire connector x2.
Lock washer x1.
Hex nut x2.
Mounting bar x1.
Threaded nipple x1.
Screw x2.
B. (1)-Canopy (W5"xH1")-XSN1061CHCAN5IN
C. (1)-Collar ring
D. (1)-Collar loop
E. (1)-Chain (3mmx72")-XSN1064CHCHA3MM
F. (1)-Center column kit loop
G. (1)-Center column kit
Top bobeche ; Ø4" ; 4pin ; 28mm center hole
-XSN1064CHBOB4PN
Metal dish ; Ø1 3/4"
Glass vase ; H5.5"
Metal cover ; H1"
H. (4)-Candle sleeve ; H3 1/8"
I . (4)-Bobeche ; Ø4" ; 4pin ; 24mm center hole
-XSN1061CHBOB4PN
J. (4)-4.5" Arm with holder
K. (1)-Distributor box ; Ø3 1/2" ; 11mm center hole
L. (1)-Bottom bobeche ; Ø4" ; 4pin ; 24mm center hole
-XSN1061CHBOB4PN
M. (1)-Metal dish ; Ø1 3/4"
N. (1)-Finial-XSN1061CHFIN
(Bulb not included)
K
M
N
L
H
J
I

Download
Advertisement