ASSEMBLY INSTRUCTION
MODEL #WIN-617-GA-CL-MWP
Crystorama .
com
25.5"
49"
DETAILED ILLUSTRATION
H
F
I
G
J
I
I
C
A
D
B
H
A
C
E
B
G
A
F
E
J
D
I
C
H
B
G
A
F
E
J
D
I
C
H
B
G
A
F
E
J
D
I
C
H
B
G
A
F
E
J
D
I
C
H
B
G
A
F
E
J
D
I
C
H G F
B
B
A
C
B C D E A B C D E A B C D E A B C D E A B C D E A B
D
E
C
A
F
H
G
I
I
J
F G H I J F G H I J F G H I J F G H I J F G H I J F G H I
SUGGESTED CRYSTAL PLACEMENT TOP VIEW
PLEASE REFERENCE CRYSTAL KEY
9"
The minimum hanging height:
You will need 6 -Candelabra Base Bulb
40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
THIS FIXTURE IS DAMP RATED
1.Determine preferred hanging
height and adjust to the required
chain.
2.On both sides, feed wires
through the hanging stem and
chain.
3.Attach the stem onto the fixture
body.
4.On each piece of chain, hang one
end at the loop on canopy and
the second end at the loop on
the top of stem.
5.Insert recommended bulb (not
included).
6.Dress the crystal strands as
illustrated.
29"
A=
B=
C=
D=
E=
F=
G=
H=
I=
J=
Crystorama .
com
PART NUMBER
MODEL #WIN-617-GA-CL-MWP
Crystal Key
A.14 Sets.
(5)14mm + (4)20mm + (1)30mm
B.14 Sets.
(7)14mm + (5)20mm + (1)30mm
C.14 Sets.
(3)14mm + (6)20mm + (1)30mm
D.12 Sets.
(10)14mm + (4)20mm + (2)30mm
E.12 Sets.
(6)14mm + (4)20mm + (1)30mm
F.14 Sets.
(4)14mm + (2)20mm + (1)30mm
G.14 Sets.
(3)14mm + (3)20mm + (1)30mm
H.14 Sets.
(5)14mm + (4)20mm
I.16 Sets.
(3)14mm + (2)20mm + (1)30mm
J.12 Sets.
(5)14mm + (2)20mm + (1)30mm
A
B
C
D
E
F
Plastic Anchor
Wood Screws
A. (1) - Mounting Hardware
include:
(1) - Mounting Plate
(4) - Machine Screw
(3) - Wire Connector
(2) - Plastic Anchor
(2) - Wood Screw
B. (1) - Canopy(L28",W4.5",H0.75") #XRE617GACAN28IN
C. (4) - Fixture Loop
D. (4) - Quick Link
E. (2) - Hanging Chain(each72",5.0mm) #XRE617GACHA5MM
F. (2) - Hanging Stem(6",12.7mm) #XRE617GASTEM6IN
For installation of mounting plate:
1.Please measure the distance between the two mounting keyholes on the mounting plate.
2.Make two points on the ceiling according to the distance measured above.
3.Drill two holes at the two points and insert the plastic anchors.
4.Put the mounting plate over outlet box and insert two wood screws in the plastic anchors and tighten
them.
