Schneider Electric S5X0513W Odace Connected Universal Rotary Dimmer LED User Guide

Add to My manuals
30 Pages

advertisement

Schneider Electric S5X0513W Odace Connected Universal Rotary Dimmer LED User Guide | Manualzz

Odace - Connected Universal Rotary Dimmer

LED

Device user guide

Information about features and functionality of the device.

01/2023

www.se.com

Legal Information

The Schneider Electric brand and any trademarks of Schneider Electric SE and its subsidiaries referred to in this guide are the property of Schneider Electric SE or its subsidiaries. All other brands may be trademarks of their respective owners.

This guide and its content are protected under applicable copyright laws and furnished for informational use only. No part of this guide may be reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), for any purpose, without the prior written permission of

Schneider Electric.

Schneider Electric does not grant any right or license for commercial use of the guide or its content, except for a non-exclusive and personal license to consult it on an "as is" basis. Schneider Electric products and equipment should be installed, operated, serviced, and maintained only by qualified personnel.

As standards, specifications, and designs change from time to time, information contained in this guide may be subject to change without notice.

To the extent permitted by applicable law, no responsibility or liability is assumed by

Schneider Electric and its subsidiaries for any errors or omissions in the informational content of this material or consequences arising out of or resulting from the use of the information contained herein.

Table of Contents

Safety information

.......................................................................................4

Odace - Connected Universal Rotary Dimmer LED

..............................5

For your safety ...........................................................................................5

About the device.........................................................................................6

Installing the device ....................................................................................6

Quick Home Connect..................................................................................7

About Quick Home Connect...................................................................7

Pairing the device in Quick Home Connect .............................................7

Operating a dimmer ..............................................................................9

Resetting the device in Quick Home Connect ........................................10

LED indications in Quick Home Connect...............................................10

Troubleshooting in Quick Home Connect ..............................................10

Pairing the device with Wiser Hub .............................................................. 11

Configuring the device ..............................................................................12

Setting the device location ...................................................................12

Renaming the device ..........................................................................12

Identifying the device ..........................................................................13

Setting RL-LED mode .........................................................................13

Setting the brightness level ..................................................................14

Removing the device from Wiser system ....................................................14

Resetting the device .................................................................................15

Using the device .......................................................................................15

Switching/Dimming the device manually ...............................................15

Adjusting the brightness level using app ...............................................16

Turning On/Off device using app ..........................................................16

Setting up a schedule ..........................................................................17

Moments ............................................................................................18

Automation.........................................................................................20

LED Indication..........................................................................................25

Troubleshooting .......................................................................................26

Technical Data .........................................................................................27

Compliance..............................................................................................28

Compliance information for Green Premium products ............................28

Trademarks ........................................................................................28

DUG_Odace Rotary Dimmer_WH-01 3

4

Safety information

Safety information

Important information

Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service, or maintain it. The following special messages may appear throughout this manual or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.

The addition of either symbol to a “Danger” or “Warning” safety label indicates that an electrical hazard exists which will result in personal injury if the instructions are not followed.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that accompany this symbol to avoid possible injury or death.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

Failure to follow these instructions will result in death or serious injury.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE

NOTICE is used to address practices not related to physical injury.

DUG_Odace Rotary Dimmer_WH-01

Odace - Connected Universal Rotary Dimmer LED

Odace - Connected Universal Rotary Dimmer LED

S5X0513W

For your safety

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

Safe electrical installation must be carried out only by skilled professionals.

Skilled professionals must prove profound knowledge in the following areas:

- Connecting to installation networks.

- Connecting several electrical devices.

- Laying electric cables.

- Safety standards, local wiring rules and regulations.

Failure to follow these instructions will result in death or serious injury.

DANGER

RISK OF FATAL INJURY FROM ELECTRIC SHOCK

The output may carry electric current even when the load is switched Off.

Disconnect the device from the supply by means of the fuse in the incoming circuit before working on the device.

Failure to follow these instructions will result in death or serious injury.

CAUTION

THE DEVICE MAY BE DAMAGED

Only connect dimmable load.

Failure to follow these instructions can result in injury or equipment damage.

DUG_Odace Rotary Dimmer_WH-01 5

Odace - Connected Universal Rotary Dimmer LED

About the device

The Connected Universal Rotary Dimmer LED (hereinafter referred to as dimmer ) has a rotary knob that can be used to switch and dim ohmic, inductive or capacitive loads manually or remotely.

Control options

Home control : To control the dimmer through the Wiser app you will need the

Wiser Hub .

Direct operation : The dimmer can always be controlled directly on-site. You can also connect any number of mechanical push buttons.

Functions

• The device can detect the load automatically

• It provides thermal protection, overload-resistance and short-circuit protection

Installing the device

Refer to the installation instructions supplied with this product.

6 DUG_Odace Rotary Dimmer_WH-01

Odace - Connected Universal Rotary Dimmer LED

Quick Home Connect

About Quick Home Connect

Quick Home Connect is your starting point for wireless home automation. It performs functions like switching, dimming and shutter control using a Connected

Wireless Switch (hereinafter referred to as Wireless switch) via a Zigbee network.

IMPORTANT: Applicable only for products sold as a part of Quick Home

Connect kits.

Quick Home Connect is a wireless connectivity solution for Zigbee devices without the need for a Hub or smartphone application.

The Wireless switch is a battery-powered wireless push-button switch that is used to control Zigbee devices (such as light or shutter) within the same Zigbee network.

Supported devices

• Connected Universal Rotary Dimmer (Rotary dimmer)

• Connected Blind Control Switch (Blind control)

• Connected Single Socket Outlet (Socket outlet)

Pairing the device in Quick Home Connect

The Wireless switch can be paired with the supported devices in the list. Refer to

Supported devices, page 7

.

Preparing the devices:

It is necessary to prepare the devices before pairing. On certain devices the status

LED is not directly visible.

DUG_Odace Rotary Dimmer_WH-01 7

Odace - Connected Universal Rotary Dimmer LED

1. Remove the rocker of the Wireless switch.

• Make sure the Wireless switch is aligned correctly to identify the pairing buttons.

◦ 1-gang wireless switch: Pairing button (A)

◦ 2-gang wireless switch: Pairing button for the right channel (A)

◦ 2-gang wireless switch: Pairing button for the left channel (B)

B A

NOTE: The Wireless switch is configured for 1-gang operation by default.

To switch from 1-gang to 2-gang operation, refer to Switching from 1-gang to 2-gang .

2. Remove the knob of the Rotary dimmer.

8

Pairing Wireless switch with Rotary dimmer

To pair the Wireless switch to the Rotary dimmer, you must put the Wireless switch and the Rotary dimmer into pairing mode.

NOTE: The pairing mode will be active for about a minute.

1. Short press the push-button (A) 5 times in quick succession on the Wireless switch.

The status LED blinks green.

3 1

5 × < 0,5 s

A

4 2

DUG_Odace Rotary Dimmer_WH-01

Odace - Connected Universal Rotary Dimmer LED

2. Short press the push button of the Rotary dimmer 5 times in quick succession.

The status LED blinks green.

5 × < 0,5 s

The light connected to the Rotary dimmer blinks for a few times. The status

LED stops blinking green on the Wireless switch and the Rotary dimmer. The

Rotary dimmer can now be controlled by the Wireless switch.

3. Assemble the rocker (A) and rotary knob (B) on the Wireless switch (A) and the Rotary dimmer (B), respectively.

A B

Operating a dimmer

You can switch the dimmer on/off or adjust its brightness using the Wireless switch.

• Short press the top (ʌ+) or bottom (v-) Wireless switch (< 0,5 s) to turn On or

Off the dimmer.

• Long press the top (ʌ+) or bottom (v-) Wireless switch (> 0,5 s) to increase or decrease the brightness of the dimmer.

< 0,5 s > 0,5 s

DUG_Odace Rotary Dimmer_WH-01 9

Odace - Connected Universal Rotary Dimmer LED

Resetting the device in Quick Home Connect

It is necessary to reset the devices in the following scenarios:

• Unpair the device in Quick Home Connect

◦ Refer to Resetting the Wireless switch .

◦ Refer to

Resetting the Rotary dimmer, page 15

.

When reset is done successfully. The Wireless switch and device returns to factory default .

• Revert the Wireless switch from 2-gang to 1-gang operation.

• Integrating into Wiser System

◦ If you wish to integrate the devices into Wiser System, reset all the devices in Quick Home Connect and refer to

Pairing the device with Wiser Hub, page 11

.

LED indications in Quick Home Connect

Pairing the device in Quick Home Connect

User Action

Press the push button 5 times in quick succession.

LED Indication Status

LED blinks green, once per second.

Pairing mode is active for 60 seconds. When pairing is completed, LED stops blinking.

Troubleshooting in Quick Home Connect

Symptom

LED displays amber in Rotary dimmer.

Possible cause

Pairing not completed and returned to factory reset.

The Wireless switch and the device are too far away from each other.

Solution

Pair the Wireless switch and the device again.

Refer to

Pairing the Wireless switch with Rotary dimmer, page 8

.

Place the Wireless switch in a position closer to the device.

Wireless switch not able to control the device reliably.

The Wireless switch lost pairing or battery drained.

Pairing different devices like Rotary dimmer and Blind control to the same channel of the

Wireless switch.

• Pair the device again. Refer to

Pairing the

Wireless switch with Rotary dimmer, page

8

.

• Replace the battery of the Wireless switch .

Reset the Wireless switch and pair the devices again with different channels. Refer to Reset the

Wireless switch and Pairing the device in Quick

Home Connect .

Scenario

Central control of multiple devices with Wireless switch. (Applicable only for users with multiple Home

Connect kits).

Procedure

If you wish to have a centralized control with a single Wireless switch, first pair the central control Wireless switch with devices and then pair the other Wireless switch with the remaining devices.

10 DUG_Odace Rotary Dimmer_WH-01

Odace - Connected Universal Rotary Dimmer LED

Pairing the device with Wiser Hub

Using the Wiser Home app, pair your dimmer with the Wiser Hub to access and control the dimmer.

Follow the steps to pair the dimmer:

1. On the Home page, tap icon.

2. Tap Devices > icon and Lights > Rotary Dimmer > Next .

NOTE: The next screen shows the joining process of the dimmer.

3. Remove the knob and short-press the push button 3 times and make sure that the LED blinks amber.

3× < 0,5 s

4. Wait for a few seconds until the LED turns green. You can also see in the app that the device is joined.

NOTE: If the LED is blinking green and red, see the instructions by tapping the link LED blinking green and red?

.

Rotary Dimmer Setup

Press the centre of the device three times rapidly. The LED will start blinking amber.

x 3

LED blinking green and red?

Device joined

5. Tap Next to enter the name of the device and assign the device to a new room or an existing room.

The dimmer is now listed on the Home page under the All and Room tabs.

DUG_Odace Rotary Dimmer_WH-01 11

Odace - Connected Universal Rotary Dimmer LED

Configuring the device

Setting the device location

Using the Wiser Home app, add the dimmer to any room (such as living room, bedroom, kitchen etc).

1. On the Home page, tap icon.

2. Tap Devices > Lights > Rotary Dimmer > Location (A) to assign the dimmer to an existing room or a new room (B) and tap Submit .

NOTE: Dimmer is the name given to the device by the user. Any name can be assigned when pairing with the Wiser Hub .

Device Details

Rotary Dimmer

OPTIONS

Device Name

Location

RL-LED Mode

Minimum Brightness

Maximum Brightness

ABOUT

Firmware Version

Identify

Delete

?

Rotary Dimmer Setup

Where does this device control?

New room name

A

Living Room

3 Devices

B

Kitchen

2 Devices

Bathroom

3 Devices

Bedroom

2 Devices

Submit

Renaming the device

Rename the dimmer using the Wiser Home app.

1. On the Home page, tap icon.

2. Tap Devices > Lights > Rotary Dimmer > Device Name (A) to rename the dimmer.

Device Details

Rotary Dimmer

OPTIONS

Device Name

Location

RL-LED Mode

Minimum Brightness

Maximum Brightness

ABOUT

Firmware Version

Identify

Delete

?

A

12 DUG_Odace Rotary Dimmer_WH-01

Odace - Connected Universal Rotary Dimmer LED

Identifying the device

Using the Wiser Home app, identify the dimmer among the devices available in a home.

1. On the Home page, tap icon.

2. Tap Devices > Lights > Rotary Dimmer > Identify (A).

Device Details

Rotary Dimmer

OPTIONS

Device Name

Location

RL-LED Mode

Minimum Brightness

Maximum Brightness

ABOUT

Firmware Version

Identify

Delete

?

A

The status LED blinks red and connected lighting devices blinks On/Off, upon successful identification of the dimmer.

3. Tap OK to finish identifying the dimmer.

Setting RL-LED mode

You can change the dimming mode in the app if you have problems with light flickering. By changing the dimming mode, the dimming quality is also improved.

1. On the Home page, tap .

2. Tap Devices > Lights > Rotary Dimmer .

3. Tap the toggle switch (A) to enable the RL-LED Mode .

NOTE:

• Refer to

Technical Data, page 27

for more information.

• Manual operation (Optional): Remove the knob of the Rotary dimmer and press the push-button 14 times.

◦ If the status LED blinks 3 times in green, RL-LED mode is enabled.

◦ If the status LED blinks once in green, Auto mode is enabled.

Device Details

Rotary Dimmer

OPTIONS

Device Name

Location

RL-LED Mode

Minimum Brightness

Maximum Brightness

ABOUT

Firmware Version

Identify

Delete

?

A

DUG_Odace Rotary Dimmer_WH-01 13

Odace - Connected Universal Rotary Dimmer LED

Setting the brightness level

If the dimmer is connected to an LED, the minimum and maximum brightness should be set to avoid flickering and switching off the LED.

1. On the Home page, tap icon.

2. Tap Devices > Lights > Rotary Dimmer .

3. Drag the slider bar to increase or decrease the Minimum Brightness and

Maximum Brightness (A).

Device Details

Rotary Dimmer

OPTIONS

Device Name

Location

RL-LED Mode

Minimum Brightness

Maximum Brightness

ABOUT

Firmware Version

Identify

Delete

?

A

Removing the device from Wiser system

Using the Wiser app, you can remove the dimmer from the system.

Follow the steps to remove the dimmer:

1. On the Home page, tap icon.

2. Tap Devices > Lights > Rotary Dimmer > Delete (A).

NOTE:

• Removing the device will reset the dimmer. After reset the LED turns amber indicating that the dimmer is ready for pairing.

• If there is a problem while pairing or resetting the dimmer, refer to

Resetting the device, page 15

.

Device Details

Rotary Dimmer

OPTIONS

Device Name

Location

RL-LED Mode

Minimum Brightness

Maximum Brightness

ABOUT

Firmware Version

Identify

Delete

?

A

14 DUG_Odace Rotary Dimmer_WH-01

Odace - Connected Universal Rotary Dimmer LED

Resetting the device

You can reset the dimmer to factory default manually.

Remove the knob and short-press the push button 3 times (<0.5 s) and then longpress the push button once (>10 s).

The LED blinks red after 10 s, and then release the push button.

Upon successful reset, the LED stops blinking. Then, the dimmer restarts and blinks green for a few seconds.

NOTE: After reset, the LED turns amber indicating that it is ready for pairing.

3× < 0,5 s

+1× > 10 s

Using the device

Switching/Dimming the device manually

You can manually turn on/off the dimmer and increase/decrease brightness level.

This will provide power to the load connected to it.

To turn on or off the dimmer, short-press the push button (< 0,5 s).

< 0,5 s

To increase brightness, turn the dimmer knob clockwise, and to decrease brightness, turn it anti-clockwise.

DUG_Odace Rotary Dimmer_WH-01 15

Odace - Connected Universal Rotary Dimmer LED

Adjusting the brightness level using app

By using the Wiser Home app, increase/decrease the brightness level in the dimmer.

Follow the steps to increase/decrease the brightness level:

1. Go to the Home page, tap All and find the device.

2. On the control panel page, drag the sliding bar up/down to increase/decrease the brightness (A).

TIP: You can also turn On/Off the dimmer on the control panel page, tap

(B) icon to turn On/Off dimmer.

Dimmer

B

1%

A

Create or assign a schedule

Device settings

Turning On/Off device using app

Using the Wiser Home app, you can turn On/Off the dimmer remotely.

Follow the steps to turn On/Off the dimmer using the app:

1. Go to the Home page, tap All and find the device.

2. Tap (A) icon to turn On/Off dimmer.

18°

Plymouth

07:05

21:35

All Living Room Kitchen Bedroom

Living Room

Dimmer

A

Home Automations Energy

16 DUG_Odace Rotary Dimmer_WH-01

Odace - Connected Universal Rotary Dimmer LED

Setting up a schedule

The dimmer can be fully controlled by schedule. Once the schedule is set, the dimmer operates at a given time.

Follow the steps to create a schedule:

1. On the Home page, tap icon.

2. Go to Schedules > icon to create a schedule.

3. Enter the name of the schedule (A).

4. In the TYPE menu, select Lights (B).

5. In the APPLIES TO menu, select Dimmer (C) from the listed devices.

New Schedule

NAME

Schedule name

A

TYPE

Lights

Shutters

B

APPLIES TO

Dimmer

C

Create

6. Tap Create to setup events.

7. Tap icon to add an event such as STATE (lights Off or dimming level in %) and WHEN ( sunrise/sunset or specific time range).

8. Tap Set to save the schedule.

DUG_Odace Rotary Dimmer_WH-01 17

Odace - Connected Universal Rotary Dimmer LED

Moments

Moment allows you to group multiple actions that are usually performed together.

By using the Wiser Home app, you can create moments based on your needs.

Creating a moment

Follow the steps to create a moment:

1. On the Home page, tap icon.

2. Go to Moments and then tap icon to create a moment.

3. Enter the name of the moment (A).

TIP : You can choose the cover image that represents your moment by tapping icon.

4. Tap Add actions (B) to select the list of devices.

Moment Creator Close Save

Actions

Name e.g. Movie Night

Add actions

A

0 of 60

B

5. In the Add actions menu, you can select the devices (C).

Select devices

Please select the devices you want to add to this moment.

All Test Three Heating

Test

Rotary dimmer

Shutter

Three

Push button dimmer

Light

Light

C

Done

6. Once all the device are selected, tap Done .

18 DUG_Odace Rotary Dimmer_WH-01

Odace - Connected Universal Rotary Dimmer LED

7. On the Moment creator page, tap on the device to set the condition:

– Tap to turn on (D)

– Drag the sliding bar up/down to increase/decrease the brightness (E) and tap Set in the upper right corner.

Dimmer Set

Tap to turn on

D

E

8. Once all conditions are set, tap Save .

Once the moment is saved, it is visible on the Moments tab. You can tap on the moment to enable it.

Editing a moment

To edit a moment:

1. On the Home page, tap .

2. Go to Moments , locate the moment you want to edit and tap (A).

3. On the Moment Editor page, you can tap each item to change the settings and tap Save (B).

Close Moment Editor Save

B

Automations

Moments

Away Mode

Automations Schedules

Cancel all overrides

Boost All

A

Moments

Movie+Night+

Actions

Light

Movie+Night+

1 of 60

On

Add actions

Delete

Home Automations Energy

DUG_Odace Rotary Dimmer_WH-01 19

Odace - Connected Universal Rotary Dimmer LED

Deleting a moment

To delete a moment:

1. On the Home page, tap .

2. Go to Moments , locate the moment you want to delete and tap

3. On the Moment Editor page, tap Delete (B) and tap Ok .

Automations

Moments

Away Mode

Automations Schedules

Cancel all overrides

Boost All

A

Moments

Movie+Night+

Close Moment Editor

Movie+Night+

Actions

Light

Save

1 of 60

On

(A).

Add actions

Delete

B

Home Automations Energy

Automation

An automation allows you to group multiple actions that are usually done together, triggered automatically or at scheduled times. By using the Wiser app, you can create automations based on your needs. This example demonstrates how a device works when the condition is met.

Creating an automation

Follow the steps to create an automation:

1. On the Home page, tap icon.

2. Go to Automation and then tap icon to create an automation.

3. Enter the name of the automation (A) .

TIP : You can choose the cover image that represents your automation by tapping icon.

Close New automation Save

Evening movie

If

Conditions are met

When

All conditions

Then

0 of 10

Any condition

A

Start by adding a condition that will trigger your automation

Add conditions

20 DUG_Odace Rotary Dimmer_WH-01

Odace - Connected Universal Rotary Dimmer LED

4. Tap Add a condition (B).

NOTE:

• A Condition will be set to trigger an Automation for example when the shutter is opened, or the motion sensor is detecting the movement.

• You can add one condition to an automation; to add another condition, you must create another automation.

Close New automation Save

Evening movie

If

Conditions are met

When

All conditions

Then

0 of 10

Any condition

Start by adding a condition that will trigger your automation

Add conditions

B

5. Select a device that will set the condition.

Select devices

Please select the devices you want to add to this moment.

All Living Room Kitchen Bedroom

Living Room

Smart Socket

Radiator

Bedroom

Blind control switch

Kitchen

Dimmer

Relay switch

6. Select the state of the device that will trigger the automation, for example relay switch On/Off.

Relay Switch Set

Tap to turn on

7. Tap Set on the upper right corner.

TIP: If you want to change the condition, swipe it to the left and tap the bin icon. Then add a new condition with the required parameters.

8. Tap Action > Add an action .

NOTE: You can add one action in an automation; to add another action, you must create another automation.

DUG_Odace Rotary Dimmer_WH-01 21

22

Odace - Connected Universal Rotary Dimmer LED

9. Select the type of action:

– Control a device - Select the device and set the desired state of the device.

– Send notification - You will be notified if the condition is met.

– Activate a moment - Select a Moment.

For this example, we will choose Control a device .

Back Add actions

Please choose an action for your automation.

Control devices

E.g. turn the light on

E.g. if motion is detected

Activate a moment

E.g. enable Away Mode

10. Select Dimmer (D) as a device that will trigger an action.

Select devices

Please select the devices you want to add to this moment.

All Living Room Kitchen Bedroom

Living Room

Smart Socket

Radiator

Bedroom

Blind control switch

Kitchen

Dimmer

Relay switch

D

11. Set the state, for example increase/decrease the dimmer brightness or turning On/Off the dimmer. Then tap Set on the upper right corner.

Relay Switch Set Dimmer Set

Tap to turn on

On

OR

DUG_Odace Rotary Dimmer_WH-01

Odace - Connected Universal Rotary Dimmer LED

12. Tap Save . The saved Automation is displayed on the Automation page. Tap the toggle switch (E) on the Automation page to enable/disable the

Automation.

Editing an automation

Follow the steps to edit an automation:

1. On the Home page, tap .

2. Go to Automation , tap the automation you want to edit (A).

A

Automation

Moments

Automations

Automations Schedules

Evening movie

Home Automations Energy

3. On the Edit automation page, you can:

– Change the icon.

– Rename the automation.

– Change the condition or action.

DUG_Odace Rotary Dimmer_WH-01 23

Odace - Connected Universal Rotary Dimmer LED

4. Remove the Condition or Action by swiping it to the left and tapping the bin icon (B).

Close Edit automation Save

Evening movie

If

Conditions are met

When

All conditions

Then

1 of 10

Any condition exactly %

B

Add conditions

Delete automation

5. Add a new condition or action and then tap Save .

Deleting an automation

Follow the steps to delete an automation:

1. On the Home page, tap .

2. Go to Automation , tap the automation you want to delete (A).

A

Automation

Moments

Automations

Automations Schedules

Evening movie

24

Home Automations Energy

3. On the Edit automation page, tap Delete Automation (B) and tap Ok .

Close Edit automation Save

Evening movie

If

Conditions are met

When

All conditions

Then

1 of 10

Any condition

Load 14

Living room exactly %

Add conditions

Delete automation

B

DUG_Odace Rotary Dimmer_WH-01

Odace - Connected Universal Rotary Dimmer LED

LED Indication

Pairing

User Action

Press the push button 3 times

LED Indication

LED blinks amber per second.

Resetting

User Action

Press the push button 3 times and hold it down once for > 10 s.

LED Indication

After 10 s, the LED blinks red.

Identifying the device

LED Indication

The LED blinks red.

Different connectivity mode

LED Indication

The LED blinks green and red while paring.

Status

Pairing mode is active for 30 seconds.

When pairing is completed, LED glows green for some time before turning Off.

Status

The device is in reset mode. It is reset to the factory settings after 10 seconds. The device then restarts and the LED blinks green for a few seconds and then stays amber.

Status

The connected lighting devices blinks On/Off, upon successful identification of the dimmer

Status

The device is trying to connect to other connectivity mode.

Short-press the push button 3 times and then hold for 20 seconds.

When the LED blinks red rapidly, release the push button.

3× < 0,5 s

+1× > 20 s

DUG_Odace Rotary Dimmer_WH-01 25

Odace - Connected Universal Rotary Dimmer LED

Troubleshooting

Symptom

Dimming up not possible.

Switching On not possible.

Flickering at minimum brightness.

Flickering

Only slight dimming capability

The device is not ready to pair after the device is removed from the app.

Solution

• Reduce/increase load.

• Allow the Dimmer to cool in case of overheating.

• Change the load (if the load is incompatible with the Dimmer).

• Allow the Dimmer to cool in case of overheating.

• Reduce load.

• Change load.

• Check wiring between the push button and the Dimmer.

• Increase minimum brightness (if flickering still persists, install a 31LCDA load correction device).

• Change the load (if the minimum brightness is insufficient).

• Set to

RL LED mode, page 13 .

• Change load.

• Set to

RL LED mode, page 13 .

• Change the brightness settings.

• Change dimming range.

• Set to

RL LED mode., page 13

• Change the load (if the load is incompatible with the Dimmer).

Reset to factory default settings, refer to

Resetting the device, page 15 .

26 DUG_Odace Rotary Dimmer_WH-01

Odace - Connected Universal Rotary Dimmer LED

Technical Data

Nominal voltage

Nominal power

AC 230 V ~, 50 Hz

Load type

LED

Load name

LED

Iron core transformer

Incandescent lamp

Halogen lamp

Electronic step-down converter

Standby

Neutral conductor

Connecting Terminals

Extension unit

Fuse protection

Operating frequency

Max. radio-frequency power transmitted

Communication protocol

Max 0.4 W

Not required

Screw terminals for max. 2 x 2.5 mm², 0.5 Nm

Single Push-button, unlimited number, max. 50 m

16 A circuit breaker

2405 - 2480 MHz

< 10 mW

Zigbee 3.0 certified

Load value

7–100 VA

RC

7–20 VA

14–150 VA

RL

RL

14–200 W

R

14–150 W

R

14–150 VA

RC

DUG_Odace Rotary Dimmer_WH-01 27

Odace - Connected Universal Rotary Dimmer LED

Compliance

Compliance information for Green Premium products

Find and download comprehensive information about Green Premium products, including RoHS compliance and REACH declarations as well as Product

Environmental Profile (PEP) and End-of-Life instructions (EOLI).

General information about Green Premium products

Click the link below to read about Schneider Electric’s Green Premium product strategy.

https://www.schneider-electric.com/en/work/support/green-premium/

Find compliance information for a Green Premium product

Click the link below to search for a product’s compliance information (RoHS,

REACH, PEP and EOLI).

NOTE: You will need the product reference number or product range to perform the search.

https://www.reach.schneider-electric.com/CheckProduct.aspx?cskey= ot7n66yt63o1xblflyfj

Trademarks

This guide makes reference to system and brand names that are trademarks of their relevant owners.

• Zigbee ® is a registered trademark of the Connectivity Standards Alliance.

• Apple ® and App Store ® are brand names or registered trademarks of Apple

Inc.

• Google Play™ Store and Android™ are brand names or registered trademarks of Google Inc.

• Wi-Fi ® is a registered trademark of Wi-Fi Alliance ® .

• Wiser™ is a trademark and the property of Schneider Electric, its subsidiaries and affiliated companies.

Other brands and registered trademarks are the property of their respective owners.

28 DUG_Odace Rotary Dimmer_WH-01

Schneider Electric

35 rue Joseph Monier

92500 Rueil Malmaison

France

+ 33 (0) 1 41 29 70 00 www.se.com

As standards, specifications, and design change from time to time, please ask for confirmation of the information given in this publication.

© 2023 – Schneider Electric . All rights reserved.

DUG_Odace Rotary Dimmer_WH-01

advertisement

Related manuals

Frequently Answers and Questions

What is Schneider Electric S5X0513W?
Schneider Electric S5X0513W is a Connected Universal Rotary Dimmer LED device that can be controlled manually or remotely.
How can I control the S5X0513W device?
You can control the device through the Wiser app using the Wiser Hub or directly on-site or by connecting mechanical push buttons.
What are the functions of the S5X0513W device?
The device can detect load automatically, provides thermal protection, is overload-resistant, and offers short-circuit protection.
What is Quick Home Connect?
Quick Home Connect is a wireless connectivity solution for Zigbee devices without the need for a Hub or smartphone application.
How do I pair the Wireless switch with the Rotary dimmer?
To pair the Wireless switch with the Rotary dimmer, put both devices into pairing mode by short pressing the push-button (A) on the Wireless switch and pressing the rotary knob for 3 seconds on the Rotary dimmer.