DENT CT-RGT12-0100-U Toroid Solid Core CT Instructions

Dent CT-RGT12-0100-U is a solid core toroid current transformer designed to provide accurate and reliable current measurements in a variety of applications. With its wide measurement range, low insertion loss, and high accuracy, the CT-RGT12-0100-U is an ideal choice for monitoring and controlling electrical systems.

PDF Download

Document

STEP-BY-STEP GUIDE
TO CONNECTING TOROID
SOLID CORE CTs TO A LOAD
Rev101215
ALL WORK SHOULD BE
PERFORMED BY A QUALIFIED
ELECTRICIAN USING PROPER
SAFETY EQUIPMENT
Equipment is protected throughout by
double insulation.
Photo 1: Solid Core
(Toroid) CT
1. Disconnect load from power
source.
2. Insert the conductor through the
center of the CT. Make sure the
maximum current of the
conductor does not exceed CTs
rating and the CT is oriented
towards the load as indicated by
the label on the CT.
Photo 2: Insert
conductor through the
center of the CT.
3. Repeat Step 2 if you are using
more than one CT.
4. Connect the white wire on the CT
to the positive terminal on the
measuring device. (See Photo 3.)
5. Connect the black wire on the CT
to the negative terminal on the
measuring device. (See Photo 3.)
6.
You are now ready to begin your
monitoring session.
Photo 3: Connect White
Wire to Positive
Terminal. Connect Black
Wire to Negative
Terminal.
DENT Instruments, Inc. | 925 SW Emkay Drive | Bend, Oregon 97702
Phone 541.388.4774 | fax 541.385.9333 | www.DENTinstruments.com
">

Hello! I am an AI chatbot specifically trained to assist you with the CT-RGT12-0100-U Toroid Solid Core CT Instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

Solid core design provides high accuracy and low insertion loss
Wide measurement range (0-100A) accommodates a variety of applications
Compact size and easy installation make it suitable for use in tight spaces
Durable construction ensures long-term reliability
Double insulation protection enhances safety

Frequently asked questions

The CT-RGT12-0100-U can measure currents up to 100A.

Connect the white wire on the CT to the positive terminal on the measuring device and the black wire on the CT to the negative terminal on the measuring device.

The CT-RGT12-0100-U has an accuracy of ±1% of reading.

Yes, the CT-RGT12-0100-U is protected throughout by double insulation.