Instruction Manual

Instruction Manual
COSY
TIME
Sleeper Model # 036300-314
IMPORTANT:
RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
Safety Precautions
Read all instructions before assembly and use of the sleeper. Keep
instructions for future use.
WARNING
• NEVER LEAVE THE CHILD UNATTENDED IN THE
COSY TIME SLEEPER
• IT IS DANGEROUS TO PLACE THE PRODUCT ON A
RAISED SURFACE SUCH AS A TABLE
• DO NOT USE THE PRODUCT IF ANY PART IS
BROKEN, TORN, OR MISSING
• ONLY AN ADULT SHOULD ASSEMBLE, FOLD AND
UNFOLD THE SLEEPER
• BEFORE ASSEMBLY, CHECK THAT THE PRODUCT
AND ALL OF IT’S COMPONENTS HAVE NOT BEEN
DAMAGED DURING TRANSPORTATION. SHOULD
ANY PART BE DAMAGED, DO NOT USE AND KEEP
OUT OF REACH OF CHILDREN
• ENSURE USERS OF THIS PRODUCT ARE
KNOWLEDGEABLE ON IT’S CORRECT OPERATION
• DO NOT POSITION THE COT NEAR WALLS AND
OBSTACLES TO PREVENT ENTRAPMENT
• DO NOT ADJUST THE PRODUCT WITH THE CHILD
INSIDE
• DO NOT MOVE THE PRODUCT WITH THE CHILD
INSIDE
• DO NOT USE THE PRODUCT WITH MORE THAN
ONE CHILD AT A TIME
Safety Precautions
This product is intended for use for babies aged
between 0 and 5 months, weighting up to a maximum
of 9kg.
When a child is able to sit, kneel or to pull itself up, the
product should not be used anymore for this child.
Before use in ‘co-sleep’ mode (fixed to the bed), make
sure the product is securely anchored and positioned.
When the product is used in ‘co-sleep’ mode (fixed to
the bed), make sure the connection belts and hooked
and tensioned properly, before laying child in the
sleeper. The product must be secured to the parent’s
mattress and no gaps between the product and the
adult’s mattress must be present.
Do not use the sleeper without the support frame. Keep
the fastening belts out of reach of children.
Safety Precautions
Read all instructions before assembly and use of the sleeper.
Keep instructions for future use.
The thickness of the mattress must be such that vertical
height (upper surface on the mattress until the upper
edge of the product’s sides) is at least 200mm. Do not
use more than one mattress in the crib.
If you purchase a mattress separately, ensure that it is
suitable for the product.
The reference mark on the product’s interior indicates
the maximum thickness of the mattress that shall be
used.
Do not leave any object inside the product that could
reduce it’s depth.
Be aware of the risk of open fires and other sources of
strong heat, such as electric bar fires, gas fires etc.
The product is ready for use only when all locking
mechanisms are engaged. Check carefully that these
are engaged before use.
WARNING:Failure to follow these warnings and
instructions could result in serious injury or death.
SUFFOCATION HAZARD: Discard all packing materials
immediately after opening. Plastic bags and ties may
cause suffocation or choking.
FALL HAZARD: To help prevent falls, do not use this
product when infant begins to push up on hands and
knees or has reached manufacturer’s recommended
maximum weight of 9kgs, whichever comes first.
Safety Precautions
SUFFOCATION
HAZARD - INFANTS
HAVE SUFFOCATED
In gaps between extra padding
and side of bassinet/cradle, and
on soft bedding.
Use only the pad provided by
manufacturer.
Never add a pillow, comforter or
another mattress for padding.
If a sheet is used with the pad, use only the one
provided by CNP Brands.
To reduce the risk of SIDS, paediatricians recommend
healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
A bedside sleeper is designed to provide a sleeping area
for an infant until he or she begins to push up on hands
and knees or approximately 5 months of age. Move
your child to another sleeping product when your child
reaches this stage.
Safety Precautions
ENTRAPMENT HAZARD - To prevent death from
entrapment, bedside sleeper must be properly secured
to adult bed using the attachment system:
• There must be no more than 1/2 inch (13mm) gap
between bedside sleeper and adult bed.
• Check tightness before each use by pulling bedside
sleeper in a direction away from adult bed.
• If gap exceeds 1/2 inch (13mm) DO NOT use
product. Do not fill the gap with pillows, blankets or
other items that are suffocation hazards.
• Always read and follow assembly instructions for
each product use mode (bedside sleeper, bassinet,
play yard).
• Always use ALL required parts for each use mode.
Check instruction manual for a list of required parts.
Periodically check product for loose, damaged, or
missing parts.
• The anchor plate and straps assembly must always
be used in bedside sleeper mode.
• Never use this product if there are any loose or
missing fasteners, loose joints, broken parts, or torn
mesh/fabric. Check before assembly and periodically
during use. Contact CNP Brands for replacement
parts. Never substitute parts.
• Assemble product according to manufacturer’s
instructions for ANY use mode - bedside sleeper as
well as the bassinet.
Safety Precautions
• To avoid death from the infant’s neck being caught
on the top rail on the side that is next to the adult
bed, the top rail must be no higher than the adult bed
mattress.
• Never permit bedding from the adult bed to extend
into the bedtime sleeper.
• NEVER LEAVE your infant in product without the
TOP HORIZONTAL RAIL installed in the upper most
position, unless securely attached to the adult bed.
• NEVER use plastic shipping bags or other plastic film
as mattress covers not sold and intended for that
purpose. They can cause suffocation.
• Make sure all straps are secured and tight when
used in the bedside sleeper position. Tighten straps
periodically.
• STRANGULATION/SUFFOCATION HAZARD: The
top edge of the lowering bar must be level with or
below the top of the adult mattress when used as
the bedside sleeper. The level of the bedside sleeper
bassinet mattress must be a minimum of 10cm
below the top edge of the lowering bar. NEVER
raise the level of the cosy time sleeper bassinet
mattress.
• NEVER USE the cosy time sleeper bassinet in cosleeper position without the anchor plate attached
and locked as shown. Failure to use this anchoring
system could result in serious injury or death to the
infant. Make sure all straps are secured and tight.
Check straps before each use.
Safety Precautions
• Failure to use this securing system will allow the cosy
time sleeper to move away from the adult bed and
could result in the infant falling out of the bedside
sleeper bedside bassinet.
• STRANGULATION HAZARD: When anchor plate and
strap assembly are not in use, store in a safe place
not accessible to children.
• DO NOT place product near a window where cords
from blinds or drapes may strangle a child.
• Keep the bassinet away from stoves, heaters,
campfires and other hazards.
• DO NOT allow children to climb or play on or under
unit in any configuration.
• FALL HAZARD: Remove infant from the cosy time
sleeper before starting any conversions.
• Always make sure all top and bottom rails are
securely locked, in all configurations, before putting
an infant child into the unit.
• WARNING: To prevent serious or fatal injury from falls
always keep child within arm’s reach. Never leave
your child unattended.
• Strings can cause strangulation! Do not place items
with a string around a child’s neck, such as hood
strings over a bassinet or cradle or attach strings to
toys.
• The bedside sleeper is designed for use only with
adult beds that are between 18.5 and 24 inches
(47cm to 60cm) from floor to top of adult mattress.
Congratulations on your purchase of the
Childcare Cosy Time Sleeper.
This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Cosy Time Sleeper
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product
specifications without notice as a result of our ongoing policy of product improvement.
Assembly Contents
Assembly Contents
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below. If anything is
missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in
New Zealand contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Sleeper frame
x1
Mattress with
removable cover
x1
Middle
support frame
x1
Outer travel bag
x1
A: Sleeper frame
B: Middle support frame
C: Fixing belts
D: Mattress with removable cover
D
A
B
C
Fixing belts
8
x1
9
Assembly / Operating Instructions
Assembly / Operating Instructions
Assembling the sleeper
Height adjustment of the sleeper
1. Unzip the carry bag and remove the
sleeper. Lay the sleeper frame face
down on a flat surface.
The sleeper can be adjusted to different
height positions.
Holding the central supporting
structure, turn both of the legs
outward until you hear them click
and lock into the top hinges.
1. To adjust the height, push the adjuster
button then turn the cap clockwise to
lower the sleeper or anti clockwise to
__ raise the sleeper. Turn the cap to the
desired height.
__
2. Select the middle support frame and
__
gently push it into the side slots as
per image.
2. Repeat this operation on the
opposite side.
__
__
3. You will hear the frame click into
position once it is in place. Make
sure both sides are securely locked
into place.
__
4. Once the frame is secure, turn
the unit onto it’s feet. Place the
mattress into the sleeper with
the curved edges of the mattress
reflecting the curved edges of the
sleeper.
Your Cosy Sleeper is now
assembled.
__
10
11
Assembly / Operating Instructions
Assembly / Operating Instructions
Co-sleeping mode (fixing to the bed)
Co-sleeping mode (fixing to the bed)
Disassembling the sleeper
1. Unzip the sides of the sleeper until
they are completely unzipped. __
Follow the steps ‘removing the lining’ on page 18 to remove the
sleeper lining from the structure.
Push in the pop pin located on the
top of the bar.
Repeat the steps ‘assembling the sleeper’ in reverse to collapse the
sleeper. Remove the middle support frame by pressing the fastening
pins on both side of the sleeper.
WARNING - IMPORTANT FOR THE SAFETY OF
YOUR CHILD:
This method is only possible with bed types that
comply with all of the conditions described in this
paragraph.
In particular, the side support of the crib should
always be put close to the parent’s mattress and
the mattress should always be aligned with the
height of the side support for restraint of the crib.
Furthermore, the crib should be firmly fixed to the
structure of the parent’s bed or to the mattress
support.
WARNING: Check to make sure that the crib in
the co-sleeping mode does not interfere with the
parent’s bed.
WARNING: During use, make sure that the parent’s
bed sheets, blankets etc, do not enter and cover the
interior of the sleeper.
12
2. Slide the bar away from the pop pin.
The bar on both ends will slide out
freely. Roll up the unzipped side and
secure with velcro.
3. Clip the female fixing belts into
the male buckets located on the
underside of the sleeper as per
image. Make sure both buckles on
either sides are clicked into place.
13
Assembly / Operating Instructions
Assembly / Operating Instructions
Co-sleeping mode (fixing to the bed cont)
4. Move the sleeper close to the parent’s bed and check the height of the sleeper compared
with the mattress on the bed. The side support of the sleeper should always be placed
close to the parent’s mattress and the mattress should always be aligned with the height of
the side support for restraint of the sleeper.
WARNING: In the co-sleeping mode the two legs
of the sleeper should always be adjusted to the
same height.
WARNING: Use of product is only permitted with
beds and/or mattresses with straight sides, use of
the product with round mattress and or mattress or
water bed is not permitted.
WARNING: When the product is used in the
co-sleeping mode, it should always be fitted to the
long side of access to the bed, do not fix the product
to the bed or bottom of the bed.
5 In order to fix the crib to the parent’s bed in co-sleeping mode, use the attached pair of
fixing belts provided. The fixing belts can be found in the lower pocket of the fabric lining. _
6. Slide the straps between the top mattress and the base using a back and forth ‘sawing’
motion and at the same time pulling downward until the straps and anchor plates are in the
desired position.
WARNING: Ensure the fixing belts are straight.
7. Tighten the loop by pulling the belts firmly. Adjust the belts separately until the sleeper is
firmly in contact with the parent’s mattress.
8. Store any excess of belts inside the pocket positioned on the bottom of the fabric lining.
WARNING: Before every use always check to
make sure there is no space between the parent’s
mattress and the side of the sleeper. If there is,
pull the belts firmly to tighten until there’s no
space and the permitted condition of use has
been restored.
14
15
Assembly / Operating Instructions
Assembly / Operating Instructions
Co-sleeping mode (fixing to the bed cont)
Freestanding mode
1. Release the rolled up velcro
fastening and zip up both sides of
sleeper.
2. Line up the bar of the support frame
as shown in the image. Gently push
the bar until it ‘clicks’ into position.
Repeat for the other side.
Never use the Cosy Time Sleeper in co-sleeping position without the
anchor plate. Ensure the plate is securely attached to the adult bed.
__
16
17
Assembly / Operating Instructions
How to care for your Cosy Time Sleeper
Removing the lining
Maintenance
1. Remove the mattress and release
the velcro tabs from the middle
support frame.
The sleeper and the mattress have a resistant fabric cover which is completely removable
and washable.
__
The removal of the fabric should be carried out by an adults only. On a regular basis check
the condition of the product and presence of any possible damage. In the case of damage
do not use and keep it out of the reach of children.
If you have any difficulties in assembling the bassinet, please contact our Service
Department. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.
2. Release the velcro straps from the
sides of the sleeper as per image.
Locate the zip underneath the fabric
lip of the structure and unzip.
__
Cleaning
Do not use solvents, abrasives or aggressive products.
After each wash check the resistance of the fabric and the stitching.
For washing of the fabric, carefully comply with instructions indicated on the label.
3. Gently remove the lining from the
upper tubular structure, making sure
not to damage the internal part of
the lining.
Hand wash in cold water
Do not bleach
__
Do not tumble dry
Do not iron
Do not dry clean
18
19
Distributed in Australia by CNP Brands, 20 Calarco Drive, VIC, 3030
Customer Service 1300 667 137 www.cnpbrands.com.au
Distributed in New Zealand by Wainhouse Distribution, 2-6 Argyle St,
Morningside, PO Box 41-014, St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000 [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement