Toyota Sequoia Reference guide

Toyota Sequoia Reference guide
2015
Sequoia
Quick Reference Guide
2015
Sequoia
OVERVIEW
FEATURES/OPERATIONS Accessory meter
Your dealership and the entire staff of Toyota Motor Sales, U.S.A.,
Inc. wish you many years of satisfied driving in your new Sequoia.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of Sequoia
operations. Every Sequoia owner should review the Owner’s
Manual that accompanies this vehicle.
SAFETY AND
EMERGENCY FEATURES
1
2
3
Doors-Child safety locks
Floor mat installation
Seat belts
Seat belts-Shoulder belt anchor
Spare tire & tools
Star Safety SystemTM
Tire Pressure Monitoring (warning) System
35
37
34
35
33
36-37
35
Visit your Toyota dealer for information on customizing this feature.
Programmable by customer. Refer to the Owner’s Manual for instructions and more information.
HomeLink® is a registered trademark of Gentex Corporation.­­
1
SAFETY AND EMERGENCY FEATURES
Pay special attention to the boxed ­­information highlighted in
color throughout the Owner’s Manual. Each box contains safe
operating instructions to help you avoid injury or equipment
malfunction.
FEATURES/OPERATIONS
20
Air Conditioning/Heating
22-23
Audio24-25
Auto lock/unlock111
Automatic Transmission
11
Bluetooth® Device Pairing Section39-48
BSM (Blind Spot Monitor)
13
Cruise control
28
33
Cup holders
Door locks
30
Door-Power back
19
Dynamic Laser Cruise Control
29
Entune™ Audio Plus
26
12
Four-wheel drive
28
Garage door opener (HomeLink®)3
17
Lights1 & turn signals
Moonroof20
Multi-Information Display230
Parking brake
12
Power outlets-12V DC
32
32
Power outlets-120V AC
Rear seat entertainment system
33
Seat adjustments-Front
15
Seat adjustments-Rear
14
23
Seat ventilators/heaters
Seats-Folding second row seats
15
16
Seats-Folding third row seats
Seats-Head restraints
13
Telephone controls (Bluetooth®)31
Tilt and telescopic steering wheel
21
Traffic27
TOW/HAUL switch
11
VSC OFF switch
21
Weather27
Window-Back19
Windows18
Windshield wipers & washers
18
The Quick Reference Guide is not intended as a substitute for the
Owner’s Manual located in your vehicle’s glove box. We strongly
encourage you to review the Owner’s Manual and supplementary
manuals so you will have a better understanding of your vehicle’s
capabilities and limitations.
All information in this Quick Reference Guide is current at the
time of printing. Toyota reserves the right to make changes at
any time without notice.
Engine maintenance
10
9
Fuel tank door release and cap
Hood release 10
Indicator symbols
6-7
Instrument cluster
5
Instrument panel
2-4
Keyless entry18
9
Light control-Instrument panel
OVERVIEW
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental operations
so you can locate and use the vehicle’s main equipment quickly
and easily.
INDEX
OVERVIEW
Instrument panel
Steering wheel controls (if equipped)
OVERVIEW
Details on the center panel
area on next page
FEATURES/OPERATIONS
2
Tilt and telescopic steering lock release lever1
Roll Sensing of Curtain shield Airbag OFF switch1
REVERSE TILT (side mirrors) switch1
Headlight cleaner1
Power back door button1
BSM (Blind Spot Monitor) main switch1
Power rearview mirror controls
1
2
If equipped
For details, refer to the “Navigation System Owner’s Manual.”
3
SAFETY AND EMERGENCY FEATURES
Steering wheel audio controls1,2
Voice command button1,2
Telephone controls1,2
Cruise control
Dynamic Laser Cruise Control distance switch1
Headlight, turn signal and front fog light1 controls
Gauges and meters
Wiper and washer controls
Tire Pressure Monitoring (warning) System reset
Power back window switch
VSC OFF switch
Ignition switch
Personal/Interior light main switch
Instrument panel light control
Tilt and telescopic steering control switch1
OVERVIEW
Center panel area
Instrument cluster
With Multi-Information Display
OVERVIEW
Without Multi-Information Display
FEATURES/OPERATIONS
1
Vehicles with navigation system: for details, refer to the “Navigation
System Owner’s Manual.”
2 If equipped
4
Tachometer
Speedometer
Service indicator and reminder
Fuel gauge
Voltmeter
Engine oil pressure gauge
Engine coolant temperature
Odometer/Trip meter and trip meter reset button
Multi-Information Display
Odometer and two trip meters
Automatic Transmission shift position indicator
Automatic Transmission shift range display
Automatic Transmission fluid temperature gauge*
* If equipped
5
SAFETY AND EMERGENCY FEATURES
Accessory meter
Theft deterrent/Engine immobilizer system indicator
Multimedia system1
Air Conditioning controls
Outside rearview mirror defogger2/Back window defogger/Windshield
wiper de-icer button2
12V DC power outlet
Seat heater2 and ventilator2 controls
Cigarette lighter
AUX audio jack/USB port
Height control switch2
AVS switch2
TOW/HAUL button2
Center differential lock/unlock switch2
Front-wheel drive control switch2
Intuitive parking assist button2
Multi-Information Display control buttons2 and/or accessory meter
control buttons2
Emergency flasher button
OVERVIEW
Indicator symbols
AUTO Limited Slip Differential indicator*
Slip indicator*
High/Low speed four-wheel drive indicator
Brake system warning*
Driver seat belt reminder
(alarm will sound if speed is over 12 mph)
Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
OVERVIEW
For details, refer to “Indicators and warning lights,” Section 2-2, 2014 Owner’s
Manual.
Height control indicator*
Height control/MANUAL indicator*
Center differential lock indicator
AIR BAG ON indicator
Cruise control indicator
AIR BAG OFF indicator*
Anti-lock Brake System warning*
Malfunction/Check Engine indicator*
Automatic Transmission fluid temperature warning*
Maintenance/Service required indicator
Traction Control OFF indicator*
Low fuel level warning
BSM (Blind Spot Monitor) outside rearview mirror indicators
Open door warning
Airbag SRS warning*
Low windshield washer fluid level warning
FEATURES/OPERATIONS
Charging system warning*
Master warning
Low Tire Pressure Warning*
Theft deterrent/Engine immobilizer system indicator
Power steering warning*
Roll Sensing of Curtain shield Airbag OFF indicator*
Headlight low/high beam indicator
SAFETY AND EMERGENCY FEATURES
Turn signal indicator
Shift position and shift range indicators
Vehicle Stability Control OFF indicator*
TOW/HAUL mode indicator
* If indicator does not turn off within a few seconds of starting engine, there may be a
malfunction. Have vehicle inspected by your Toyota dealer.
6
7
OVERVIEW
Keyless entry
Fuel tank door release and cap
Locking operation
Without power back door
Turn to open
OVERVIEW
With power back door
Pull
Push
Unlocking operation
With power back door
Without power back door
PushONCE: Driver door
TWICE: All doors
NOTE: Tighten until one click is
heard. If the cap is not tightened
enough, Check Engine “ ”
indicator may illuminate.
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for
safety.
Power back door operation (if equipped)
FEATURES/OPERATIONS
Store
Light control-Instrument panel
Push and hold
Panic button
Brightness
control
+
Push and hold
8
9
SAFETY AND EMERGENCY FEATURES
-
FEATURES/OPERATIONS
OVERVIEW
Hood release
Automatic Transmission
Reverse
Neutral
OVERVIEW
Park*
Pull
Drive
“S” mode
“S” “D”
* The ignition switch must be “ON” and the brake pedal depressed to shift from Park.
“S” (Sequential) mode
Shift the shift lever to “S” position from “D” position.
+: Upshift (push and release)
-: Downshift (pull and release)
Engine maintenance
TOW/HAUL switch (if equipped)
FEATURES/OPERATIONS
Downshifting increases power going uphill, or provides engine braking downhill.
For best fuel economy during normal driving conditions, always drive with the
shift lever in the “D” position.
Pull up latch and raise hood
System ON/OFF
“Tow/Haul” mode can be used when carrying heavy loads. As fuel economy is
reduced while in “Tow/Haul” mode, deactivating when driving without a load is
recommended.
Auto lock/unlock
Windshield washer fluid tank
Engine oil level dipstick
Engine coolant reservoir
Engine oil filler cap
NOTE: Regularly scheduled maintenance, including oil changes, will help
extend the life of your vehicle and maintain performance. Please refer
to the “Warranty & Maintenance Guide.”
10
Automatic door locks can be programmed to operate in four different modes, or
turned OFF.
-Doors lock when shifting from Park.
-Doors lock when the vehicle speed is approximately 12 mph or higher.
-Doors unlock when shifting into Park.
-Doors unlock when the driver’s door is opened within 10 seconds after turning the
ignition switch to the “ACC” or “LOCK” position.
Refer to the Owner’s Manual for more details.
11
SAFETY AND EMERGENCY FEATURES
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
FEATURES/OPERATIONS
BSM (Blind Spot Monitor)(if equipped)
Four-wheel drive (if equipped)
Four-wheel drive control switch
OVERVIEW
System ON/OFF
Turn
Turn
Push
and turn
WD High speed (2WD)
Low speed (4WD)
Shift to “N” position when stopped, then push and turn to “4L” from “4H.”
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
For best fuel economy and performance under normal driving conditions, keep in
“2WD” position.
Center differential lock/unlock switch
Seats-Head restraints
Front
FEATURES/OPERATIONS
High speed (4WD)
Turn to “4H” from “2WD” with speed below 62 mph.
Shift to “N” position when stopped, then turn to “4H” from “4L.”
The Blind Spot Monitor is a system that assists the driver to confirm safety when
changing lanes. The system uses radar sensors to detect vehicles that are traveling
in an adjacent lane in the area that is not reflected in the outside rearview mirror
(the blind spot), and advises the driver of the vehicles’ existence via the outside
rearview mirror indicator.
Turn to “2WD” from “4H” with speed below 62 mph.
Second row
Push
Lock the center differential if the vehicle’s wheels get stuck in a ditch or when
driving on a slippery or bumpy surface.
Third row (outside)
Third row (center)
Parking brake
Set: Depress
Release: Depress again
12
Lock release button
13
SAFETY AND EMERGENCY FEATURES
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
Lock release button
Middle head restraint in
8-passenger models only.
Lock release button
FEATURES/OPERATIONS
Seat adjustments-Rear
Seat adjustments-Front
Second row
Manual seat
Power seat
OVERVIEW
Separate seat
Bench seat
Seat position (forward/backward)
Seatback angle
Seat height
Seat cushion angle
Lumbar support
Position, cushion angle and height
Leg support (if equipped)
(1)
Third row
Manual seat
FEATURES/OPERATIONS
Seats-Folding second row seats
(2)
Power seat
(3)
Separated seat
Bench seat
Pull
Pull
Seat position (forward/backward)
Seatback angle
Seatback angle/lock release and slide
Seatback folding/returning
Refer to the Owner’s Manual for more details.
14
(1)
(2)
(3)
(4)
Lower the head restraints.
Stow the seat belt buckles.
Fold down the seatback.
Fold out the board (if equipped) from the seatback.
15
SAFETY AND EMERGENCY FEATURES
(4)
FEATURES/OPERATIONS
Seats-Folding third row seats
(1)
Lights & turn signals
Headlights
(2)
Type B
Auto
Auto
Headlights
Parking lights
Headlights
Parking lights
Insert
Type D
Type C
Insert
Headlights
Parking lights
Auto
DRL OFF
(4)
(3)
Headlights
Parking lights
Auto
DRL OFF
High beam flasher
Low beam
High beam
FEATURES/OPERATIONS
(5) Manual seat only
(6) From rear door side
Manual seat
OVERVIEW
Type A
From back door side
Manual seat
Pull
-Daytime Running Light system (DRL) Automatically turns on the front turn
signal lights upon starting engine and releasing parking brake.
-Automatic light cut off system Automatically turns lights off after a delay of
30 seconds, or the lock switch on remote may be pushed after locking.
Front fog lights (if equipped)
Power seat
Power seat
Turn signals
Type A
Right turn
Type B
(1)
(2)
(3)
(4)
(5)
(6)
Lane change
Release the center seat belt tab.
Stow the center seat belt tab.
Lower the head restraint.
Stow the seat belt buckles.
Fold the head restraint.
Fold the seats.
Left turn
Turn
Front fog lights come on only when the
headlights are on low beam.
16
17
SAFETY AND EMERGENCY FEATURES
Lane change
Turn
FEATURES/OPERATIONS
Windshield wipers & washers
Window-Back
Front
Operating from inside
Type B
Single wipe
Adjust frequency*
OVERVIEW
Type A
Single wipe
Adjust frequency*
Interval wipe
Interval wipe
Slow
Slow
Open
Close
Fast
Fast
Automatic operation Push the switch completely in or pull it completely out and
release to fully open or close. To stop window midway, lightly push the switch in
the opposite direction.
Pull to wash and wipe
Operating from outside
Open Close
FEATURES/OPERATIONS
* Intermittent windshield wiper frequency adjustment
Rotate to increase/decrease wipe frequency.
Rear
Type A
Wash and wipe
Wipe
Interval wipe
Type B
Wash and wipe
Wipe
Interval wipe
Wash and wipe
Wash and wipe
Door-Power back (if equipped)
Instrument panel
Back door (close only)
Push and hold
Windows
Driver side
Window lock
switch
Down
Push and hold
Open: Push and hold
Close: Push and hold again
Automatic operation Push the switch completely down or pull it completely
up and release to fully open or close. To stop window partway, lightly push the
switch in the opposite direction.
NOTE: Door will stop closing if
obstructed, or to manually stop
door closing, push button again.
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
Refer to the Owner’s Manual for more details.
Window lock switch Deactivates all passenger windows and back window. Driver’s
window remains operable.
18
19
SAFETY AND EMERGENCY FEATURES
Up
FEATURES/OPERATIONS
Moonroof (if equipped)
Tilt and telescopic steering wheel
Sliding operation
Tilting operation
Manual
Length
Lock release lever
OVERVIEW
Angle
Tilt
Open
Close
Close
Push to open/close. To stop partway, press the switch lightly.
Hold wheel, push lever down, set angle and length and return lever.
Power
Accessory meter
Up
FEATURES/OPERATIONS
Away from
the driver
Toward the
driver
Down
Control switch
Toggle the control switch to set angle and length.
NOTE: Do not attempt to adjust while the vehicle is in motion.
VSC OFF switch
Refer to your Owner’s Manual for complete details on this system before
attempting to use it.
VSC OFF switch
The VSC OFF switch is used to switch between modes related to the TRAC, VSC
and Auto LSD functions.
Refer to Section 2-4 of the Owner’s Manual for more information.
20
21
SAFETY AND EMERGENCY FEATURES
Outside temperature/Cruise information display (if equipped)
Clock
Hour set
Minute set
Change information (if equipped)
“SELECT RESET” button (if equipped)
“SETUP” button to customize unit (if equipped)
FEATURES/OPERATIONS
Rear Air Conditioning
Air Conditioning/Heating
Front Air Conditioning
OVERVIEW
Control panel
Automatic climate control ON
Display
Airflow vent
Fan speed
Temperature selector
Climate control OFF
Display
Seat ventilators/heaters (if equipped)
With ventilators
Driver’s seat
Heater only
Driver’s seat
Front passenger’s seat
Ventilator
Ventilator
Heater
Heater
Turn
Turn
ON
ON
Second seats
High heat
setting
Push
Low heat
setting
* To change the rear seat setting, press the “REAR” button.
Push
Push lightly in the opposite direction to turn off.
22
Front passenger’s seat
23
SAFETY AND EMERGENCY FEATURES
Fan speed
Automatic climate control ON
Adjusting the temperature setting will cause the airflow vents, air intake and
fan to adjust automatically.
Air Conditioning ON/OFF
Temperature selector (driver side)
Windshield defogger (fresh air only)
Airflow vent
In “
” mode, use fresh air (“
” indicator “OFF”) to reduce window
fogging.­­­
Temperature selector (front passenger side)
“SYNC” button
Indicator ON: Synchronized temperature settings for driver, front passenger
and rear seats.
Indicator OFF: Separate temperature settings for driver, front passenger and
rear seats.
Outside rearview mirror/Back window defogger or windshield wiper de-icer
(if equipped)
Rear Air Conditioning ON/OFF
Temperature selector (rear passenger area*)
Recirculate cabin air (fresh air when OFF)
Climate control OFF
FEATURES/OPERATIONS
Front seats
FEATURES/OPERATIONS
Steering wheel switches (if equipped)
Audio
OVERVIEW
Touch screen display
Eject CD
Turn to tune
radio stations
manually or
select tracks
or files
Push to
display audio
screen
>
“
”“
”
Use to search within the selected audio medium (radio, CD, iPod®, etc.).
“MODE”
Push to turn audio ON and select an audio mode. Push and hold to mute or
pause the current operation.
>
Seek station/
CD track
select
Volume control
>
Push to turn
ON/OFF
>
Entune Audio
iPod®/USB/AUX port
*2
FEATURES/OPERATIONS
Entune Premium Audio*1/Entune Premium JBL Audio*1
*2
*1 Refer to the “Entune/Navigation System Owner’s Manual” for instruction.
*2 Entune Premium Audio or Entune Premium JBL Audio
iPod®/USB port
By connecting a USB-compatible portable audio device or USB memory to the
USB port, you can listen to music from the portable audio device or USB memory
through the vehicle’s speaker system.
AUX port
By inserting a mini plug into the AUX port, you can listen to music from a portable
audio device through the vehicle’s speaker system while in AUX mode.
SAFETY AND EMERGENCY FEATURES
24
25
FEATURES/OPERATIONS
Entune™ Audio Plus
Traffic
OVERVIEW
1
2
The Traffic App displays a scrollable map showing local traffic in 3 colors. Traffic
conditions are displayed in red, yellow and green for heavy, moderate or light
traffic conditions. Use
or
arrows to scroll the map up or down.
3
AUDIO Button
Access to audio functions.
2
HOME Button
Access to Home screen.
3
APPS Button
Access to features such as fuel
consumption, traffic, and weather.
HOME SCREEN - the home
screen offers a two panel
and a three panel layout.
Information and layout will
vary depending on selected
set up.
Weather
FEATURES/OPERATIONS
1
NOTE: Console configuration and position of buttons may vary in some vehicles.
The Weather App options show current weather and recently checked locations
weather. You can also search for a weather forecast by national or local cities.
Always drive safely, obey traffic laws & focus on the road while driving. Availability and
accuracy of the information provided by HD services is dependent upon many factors.
Services not available in every city or roadway. Use common sense when relying on
information provided. HD Radio(tm) Technology manufactured under license from iBiquity
Digital Corporation U.S. and Foreign Patents. HD Radio(tm) and the HD, HD Radio, and “Arc”
logos are proprietary trademarks of iBiquity Digital Corp.
26
27
SAFETY AND EMERGENCY FEATURES
NOTE: Entune™ Audio Plus is available on SR5 only. For Limited and Platinum, please refer to
the Entune™ Premium Audio with Navigation and App Suite Quick Reference Guide or Toyota
Owner’s Manual.
FEATURES/OPERATIONS
Dynamic Laser Cruise Control (if equipped)
Garage door opener (HomeLink®)*
(if equipped)
Fixed speed mode
Garage door openers manufactured under license from HomeLink® * can be
programmed to operate garage doors, estate gates, security lighting, etc.
Refer to “Garage door opener,” Section 3-5 in the Owner’s Manual for more
details.
(1) To select conventional/fixed speed control Push the ON-OFF button. Push the
lever forward and hold.
(2) To set, cancel and resume a speed Refer to instructions for Cruise Control in
this guide.
Distance control mode
FEATURES/OPERATIONS
For programming assistance, contact HomeLink® at 1-800-355-3515, or visit
http://www.homelink.com.
* HomeLink® is a registered trademark of Johnson Controls, Inc.
Cruise control
Turning system ON/OFF
System ON/OFF
OVERVIEW
Refer to the Owner’s Manual for more details and complete safety precautions
before attempting to use “Dynamic Laser Cruise Control.”
Distance control mode will cruise at a set speed, decelerate to maintain selected
distance from a slower vehicle traveling in front of you, and accelerate back up
to the selected speed if the vehicle traveling in front of you changes lanes or
speeds up.
(1) To select distance control mode Push the ON-OFF button. The “CRUISE”
indicator will come on.
(2) To set, cancel and resume a speed Refer to instructions for Cruise Control in
this guide.
NOTE: Once vehicle speed is set, pushing lever up toward “+ RES” will increase
speed to the nearest 5 mph, and then in 5 mph increments. Pushing lever down
toward “- SET” will reduce speed in the same way.
Functions
Increase speed
LONG
MIDDLE
Cancel1
SHORT
Set
Decrease speed
1 The
set speed may also be cancelled by depressing the brake pedal.
2 The set speed may be resumed once vehicle speed exceeds 25 mph.
28
(3) To change the vehicle-to-vehicle distance
Push the distance button to cycle through the settings, which will change
progressively from LONG to MIDDLE to SHORT.
29
SAFETY AND EMERGENCY FEATURES
Resume2
FEATURES/OPERATIONS
Multi-Information Display (if equipped)
Telephone controls (Bluetooth®)
(if equipped)
Push “SETUP” to customize to the following settings:
(1)UNIT
(2) KEYLESS ENTRY FEEDBACK
(3) KEYLESS ENTRY RELOCK TIMER
(4) KEYLESS ENTRY ALL DOORS UNLOCK
(5) DOOR AUTO LOCKING
(6) DOOR AUTO UNLOCKING
(7) HEADLAMPS AUTO OFF TIMER
(8) COURTESY LAMPS OFF TIMER
(9)LANGUAGE
(10)DEFAULT SETTING
Microphone
Steering wheel telephone switches
Start call
End call
Voice command
button
FEATURES/OPERATIONS
Push “INFO” to change information in the following:
(1) Zoom display of odometer and trip meter
(2) Average gas mileage
(3) Current gas mileage
(4) Miles left on remaining fuel
(5) Running time from engine start
(6) Average vehicle speed
OVERVIEW
Audio unit
Volume
Bluetooth® technology allows dialing or receipt of calls without taking hands
from the steering wheel or using a cable to connect the compatible telephone
and the system.
Refer to “Using a Bluetooth® phone” Section 3-2 in the Owner’s Manual, for
more details.
Door locks
SAFETY AND EMERGENCY FEATURES
Unlock
Lock
30
31
FEATURES/OPERATIONS
Power outlets-12V DC (if equipped)
Front audio system
DVD player
DVD screen
Remote control
A/V input port
120V AC power outlet
Headphone volume controls and headphone jacks
FEATURES/OPERATIONS
Luggage compartment
Back of the center console box
OVERVIEW
Inside of the center console box
Instrument panel
Rear seat entertainment system
(if equipped)
For details, refer to the “Navigation System Owner’s Manual.”
Cup holders
Front
Front console
Back of the front console
Key must be in the “ACC” or “ON” position to be used.
Power outlets-120V AC (if equipped)
Rear side trim
Rear console box (if equipped)
Key must be in the “ON” position to be used.
32
33
SAFETY AND EMERGENCY FEATURES
Rear
SAFETY AND EMERGENCY FEATURES
Seat belts-Shoulder belt anchor
Tire Pressure Monitoring (warning)
System
Squeeze lock release to lower
OVERVIEW
System reset initialization
1. Push and hold “
SET” button
until the indicator blinks three
times.
2. Wait a few minutes to allow
initialization to complete.
Doors-Child safety locks
Rear door
Unlock
After adjusting tire pressures, or after tires have been rotated or replaced, turn
the ignition switch to “ON” and press and hold the “ SET” button until indicator
blinks three times. Let the vehicle sit for a few minutes to allow initialization to
complete.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
Moving the lever downward will allow the door to be opened only from the outside.
Spare tire & tools
Spare tire, jack and tool location
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the
light.
FEATURES/OPERATIONS
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.­
Lock
Seat belts
Jack and tool
Spare tire
Take up slack
Too high
Removing the spare tire
(1)
(2)
(3)
If belt is fully extended, then retracted even slightly, it cannot be re-extended
beyond that point, unless fully retracted again. This feature is used to help hold
child restraint systems securely.
To find more information about seat belts, and how to install a child restraint
system, refer to the Owner’s Manual.
(1) Remove the cover.
(2) Assemble the jack handle.
(3) Insert the jack handle extension into the lowering screw. Lower the spare tire
completely to the ground.
Refer to the Owner’s Manual for tire changing and jack positioning procedures.
34
35
SAFETY AND EMERGENCY FEATURES
Keep as low on
hips as possible
SAFETY AND EMERGENCY FEATURES
Smart Stop Technology (SST)
Star Safety SystemTM
Vehicle Stability Control (VSC)
VSC helps prevent loss of traction during cornering by reducing engine power and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle is traveling.
When it senses that the front or rear wheels begin to lose traction, VSC reduces
engine power and applies braking to selected wheels. This helps restore traction
and vehicle control.
Smart Stop Technology automatically reduces engine power when the accelerator
and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are applied
firmly for longer than one-half second at speeds greater than five miles per hour.
OVERVIEW
All new Toyota vehicles come standard with the Star Safety SystemTM, which
combines Vehicle Stability Control (VSC), Traction Control (TRAC), Anti-lock
Braking System (ABS), Electronic Brake-force Distribution (EBD), Brake Assist (BA)
and Smart Stop Technology (SST).
SST doesn’t engage if the brake pedal is depressed before the accelerator pedal,
allowing vehicles to start on a steep hill and safely accelerate without rolling
backward.
Floor mat installation
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
Traction Control (TRAC)
VSC helps prevent loss of traction during cornering by reducing engine power, and
Traction Control helps maintain traction on loose gravel and wet, icy, or uneven
surfaces by applying brake force to the spinning wheel(s).
Always align the Δ marks
Anti-Lock Brake System (ABS)
ABS helps prevent brakes from locking up by “pulsing” brake pressure to each
wheel. This limits brake lockup and helps provide directional control for the
current road conditions.
FEATURES/OPERATIONS
Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. This
transfers power to the wheels that still have traction to help keep you on track.
• Only use floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep the mat in
place.
• Install floor mats right side up.
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
Electronic Brake Force Distribution (EBD)
SAFETY AND EMERGENCY FEATURES
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD) to help
maintain control and balance when braking. Abrupt stops can cause a vehicle
to tilt forward, reducing the braking power of the rear wheels. EBD responds to
sudden stops by redistributing brake force to enhance the braking effectiveness of
all four wheels.
Brake Assist (BA)
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a
split second to react, Brake Assist can add additional brake pressure more quickly
than just the driver alone can.
36
37
NOTES
BLUETOOTH® DEVICE PAIRING
SECTION
38
39
BLUETOOTH DEVICE PAIRING
To begin the Bluetooth Pairing process, press the HOME button on the
faceplate of your Toyota Vehicle Entune Multimedia Head Unit.1
Bluetooth Pairing for Android phone
and Entune touch screen system
Initiate Bluetooth on your Entune Multimedia Head Unit
Once you have Bluetooth® enabled on your phone and ready to pair, you will need
to initiate Bluetooth® on your Entune head unit. Please follow the instructions
below to pair your Bluetooth enabled phone to your Entune system.
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all Android mobile digital devices have Bluetooth integrated; all you have to
do is setup the phone and multimedia system to “talk” to each other and form a
connection.2
STEP 6
Initiate Bluetooth on your Android
STEP 1
From your APPS
SCREEN, select
SETTINGS
STEP 2
Select
CONNECTIONS and
select BLUETOOTH
On your Toyota Vehicle
Entune Multimedia Head Unit,
Select SETUP BUTTON on the
Home Screen.
STEP 3
STEP 4
Ensure
BLUETOOTH
is ON
Select YOUR PHONE
DEVICE to make it
discoverable.
Phone will seek out
Bluetooth devices while
remaining discoverable.
STEP 5
While your Android device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
STEP 9
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
STEP 7
STEP 8
Select BLUETOOTH
STEP 10
STEP 11
Your smartphone is now
paired with Entune.
You may need to enter the provided
Bluetooth PIN on your phone.
1 To determine which head unit is installed in your vehicle, refer to page 24.
2 Some Android devices may have slightly different SETTINGS screen layout depending on manufacturer of
device and Android OS version.
40
Select ADD, to add your
phone device
41
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
BLUETOOTH DEVICE PAIRING
Initiate Bluetooth on your Entune Multimedia Head Unit (continued)
Bluetooth Pairing for iPhone and Entune
touch screen system
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth®. This pairing process is quick and
easy: all iPhone® mobile digital devices have Bluetooth® integrated; all you have
to do is setup the phone and multimedia system to “talk” to each other and form
a connection. Bluetooth Pairing Guide for select 2014 models.
Initiate Bluetooth on your iPhone
STEP 12
STEP 13
Using your smartphone, you
will need to allow Entune
access to your messaging
and contacts
A confirmation will
appear once your phone
has been paired and
connected.
It is recommended to check the
“Don’t ask again” box, so as not
to have to press OK every time the
phone makes a Bluetooth connection
with your Toyota
STEP 1
From the HOME
SCREEN, select
SETTINGS
Additional Resources
STEP 2
Select BLUETOOTH
STEP 3
STEP 4
Ensure
BLUETOOTH
is ON
Your iPhone will seek
out Bluetooth devices
while remaining
discoverable
If you’re having trouble pairing your phone, Toyota has you covered. You can get
more information from the following sources:
Online Pairing Guide:
www.toyota.com/connect
STEP 5
Your Toyota Owner’s Manual
Located in the vehicle glovebox
While your iPhone device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
Toyota Customer
Experience Center
(800) 331-4331
CONTINUE ON THE NEXT PAGE...
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on software, coverage & carrier.
3. Android is a trademark of Google, Inc. All rights reserved. Google is not a participant in or sponsor of this promotion.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data; you are responsible for charges. Apps & services subject to change. See Toyota.com/entune for details.
5. Bluetooth Pairing Guide for select 2014 models.
42
43
BLUETOOTH DEVICE PAIRING
Initiate Bluetooth on your Entune Multimedia Head Unit
Once you have Bluetooth® enabled on your phone and ready to pair, you will need
to initiate Bluetooth® on your Entune head unit. Please follow the instructions
below to pair your Bluetooth enabled phone to your Entune system.
STEP 6
Select SETUP BUTTON on the
Home Screen.
STEP 7
STEP 8
Select BLUETOOTH
Select ADD, to add your
phone device
STEP 12
STEP 13
Using your smartphone, you may need to
allow Entune access to your messaging
and contacts
A confirmation will
appear once your phone
has been paired and
connected.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get
more information from the following sources:
Online Pairing Guide:
www.toyota.com/connect
STEP 9
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
STEP 10
STEP 11
Your smartphone is now
paired with Entune.
You may need to enter the provided
Bluetooth PIN on your phone.
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on software, coverage & carrier.
3. Android is a trademark of Google, Inc. All rights reserved. Google is not a participant in or sponsor of this promotion.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data; you are responsible for charges. Apps & services subject to change. See Toyota.com/entune for details.
5. Bluetooth Pairing Guide for select 2014 models.
44
45
BLUETOOTH DEVICE PAIRING
Initiate Bluetooth on your Entune Multimedia Head Unit
Bluetooth Pairing for Windows phone and
Entune touch screen system
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth®. This pairing process is quick and
easy: all Windows Phone® mobile digital devices have Bluetooth® integrated; all
you have to do is setup the phone and multimedia system to “talk” to each other
and form a connection. Bluetooth Pairing Guide for select 2014 models.
Once you have Bluetooth® enabled on your phone and ready to pair, you will need
to initiate Bluetooth® on your Entune head unit. Please follow the instructions
below to pair your Bluetooth enabled phone to your Entune system.
Initiate Bluetooth on your Windows Phone
STEP 6
On your Toyota Vehicle
Entune Multimedia Head Unit,
Select SETUP BUTTON on the
Home Screen.
STEP 1
From your APP LIST,
select SETTINGS
STEP 2
Select BLUETOOTH
46
STEP 3
STEP 4
Ensure
BLUETOOTH
is ON
Phone will seek out
Bluetooth devices
while remaining
discoverable
STEP 5
STEP 9
While your iPhone device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
CONTINUE ON THE NEXT PAGE...
You may need to enter the provided
Bluetooth PIN on your phone.
STEP 7
STEP 8
Select BLUETOOTH
STEP 10
Select ADD, to add your
phone device
STEP 11
Your smartphone is now
paired with Entune.
47
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
BLUETOOTH DEVICE PAIRING
NOTES
Initiate Bluetooth on your Entune Multimedia Head Unit (continued)
STEP 12
STEP 13
Using your smartphone,
you may need to allow
Entune access to your
contacts
A confirmation will
appear that your phone
has been paired and
connected.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get
more information from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on software, coverage & carrier.
3. Android is a trademark of Google, Inc. All rights reserved. Google is not a participant in or sponsor of this promotion.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data; you are responsible for charges. Apps & services subject to change. See Toyota.com/entune for details.
5. Bluetooth Pairing Guide for select 2014 models.
48
49
NOTES
00505-QRG15-SEQ
Printed in the USA 7/14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement