Operating instructions
VIZIO
USER MANUAL
Models D32-D1, D32h-D1, & D32x-D1
This product qualifies for ENERGY STAR in the “factory default”
setting and this is the setting in which power savings will be
achieved. Changing the factory default picture settings or
enabling other features will increase power consumption that
could exceed the limits necessary to qualify for ENERGY STAR
rating. For more information on the ENERGY STAR program, go
to energystar.gov
For DTS patents, see
http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS,
the Symbol, & DTS and the Symbol together are registered
trademarks, and
DTS Studio Sound is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC.

Welcome
THANK YOU FOR CHOOSING VIZIO
IMPORTANT SAFETY INSTRUCTIONS
And congratulations on your new VIZIO HDTV.
Your TV is designed and manufactured to operate within defined
design limits. Misuse may result in electric shock or fire. To
prevent your TV from being damaged, the following instructions
should be observed for the installation, use, and maintenance of
your TV. Read the following safety instructions before operating
your TV. Keep these instructions in a safe place for future
reference.
To get the most out of your new VIZIO product, read these
instructions before using your product and retain them for future
reference. Be sure to inspect the package contents to ensure there
are no missing or damaged parts.
PRODUCT REGISTRATION
•
To purchase or inquire about accessories and installation services
for your VIZIO product, visit our website at www.VIZIO.com or call
toll free at (877) 698-4946.
To reduce the risk of electric shock or component damage,
switch off the power before connecting other components
to your TV.
•
Read these instructions.
We recommend that you either:
•
Keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
•
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
•
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
•
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
•
Only use attachments/accessories specified by the
manufacturer.
•
Register your VIZIO product at www.VIZIO.com.
•
Complete and mail the enclosed registration card.
Extended Warranties
For peace of mind, and to protect your investment beyond
the standard warranty, VIZIO offers on-site extended warranty
service plans. These plans provide additional coverage during the
standard warranty period, and must be purchased within the first
year after purchase. To purchase an extended warranty service
plan, visit www.vizio.com.
This symbol alerts you to important warnings or notices
as part of the operating instructions.
WHEN READING THIS MANUAL
This symbol identifies helpful tips.
iii

• Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
•
Do not apply pressure or throw objects at your TV. This may
compromise the integrity of the display. The manufacturer’s
warranty does not cover user abuse or improper
installations.
•
The power cord must be replaced when using different
voltage than the voltage specified. For more information,
contact your dealer.
•
When connected to a power outlet, power is always flowing
into your TV. To totally disconnect power, unplug the power
cord.
•
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of un-isolated, dangerous voltage within the
inside of your TV that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
•
Do not overload power strips and extension cords.
Overloading can result in fire or electric shock.
•
The wall socket should be installed near your TV and easily
accessible.
•
Only power of the marked voltage can be used for your TV.
Any other voltage than the specified voltage may cause fire
or electric shock.
•
Do not touch the power cord during lightning. To avoid
electric shock, avoid handling the power cord during
electrical storms.
•
Unplug your TV during a lightning storm or when it will not
be used for long period of time. This will protect your TV
from damage due to power surges.
•
Do not attempt to repair or service your TV yourself.
Opening or removing the back cover may expose you to
high voltages, electric shock, and other hazards. If repair
is required, contact your dealer and refer all servicing to
qualified service personnel.
•
WARNING: Keep your TV away from moisture. Do not
expose your TV to rain or moisture. If water penetrates into
your TV, unplug the power cord and contact your dealer.
• Unplug the power cord before cleaning your TV.
• When moving your TV from an area of low temperature to
an area of high temperature, condensation may form in the
housing. Wait before turning on your TV to avoid causing
fire, electric shock, or component damage.
• A distance of at least three feet should be maintained
between your TV and any heat source, such as a radiator,
heater, oven, amplifier etc. Do not install your TV close to
smoke. Operating your TV close to smoke or moisture may
cause fire or electric shock.
• Slots and openings in the back and bottom of the cabinet
are provided for ventilation. To ensure reliable operation of
your TV and to protect it from overheating, be sure these
openings are not blocked or covered. Do not place your
TV in a bookcase or cabinet unless proper ventilation is
provided.
• Never push any object into the slots and openings on your
TV cabinet. Do not place any objects on the top of your TV.
Doing so could short circuit parts causing a fire or electric
shock. Never spill liquids on your TV.
• Your TV should be operated only from the type of power
source indicated on the label. If you are not sure of the type
of power supplied to your home, consult your dealer or
local power company.
iv

Continuous use in this case may result in fire or electric
shock.
•
Do not use your TV if any abnormality occurs. If any smoke
or odor becomes apparent, unplug the power cord and
contact your dealer immediately. Do not try to repair your
TV yourself.
•
Avoid using dropped or damaged appliances. If your TV
is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power
cord immediately and contact your dealer for repair.
Continued use of your TV may cause fire or electric shock.
•
Do not install your TV in an area with heavy dust or high
humidity. Operating your TV in environments with heavy
dust or high humidity may cause fire or electric shock.
•
Follow instructions for moving your TV. Ensure that the
power cord and any other cables are unplugged before
moving your TV.
•
When unplugging your TV, hold the AC/DC power adapter,
not the cord. Pulling on the power cord may damage the
wires inside the cord and cause fire or electric shock. When
your TV will not be used for an extended period of time,
unplug the power cord.
•
To reduce risk of electric shock, do not touch the connector
with wet hands.
•
Insert batteries in accordance with instructions. Incorrect
polarities may cause the batteries to leak which can
damage the remote control or injure the operator. Do not
expose batteries to excessive heat such as sunshine, fire or
the like.
•
If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
•
This apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
•
The mains plug or appliance coupler is used as the
disconnect device, the disconnect device shall remain
readily operable.
•
CAUTION - These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are
qualified to do so.
h
v
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated DANGEROUS VOLTAGE within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to persons.

TELEVISION ANTENNA CONNECTION
PROTECTION
Lightning Protection
For added protection of the TV during a lightning storm or when it
is left unattended or unused for long periods of time, unplug the TV
from the wall outlet and disconnect the antenna or cable system.
If an outside antenna/satellite dish or cable system is to be
connected to the TV, make sure that the antenna or cable system
is electrically grounded to provide some protection against voltage
surges and static charges.
Power Lines
Do not locate the antenna near overhead light or power circuits, or
where it could fall into such power lines or circuits. Remember, the
screen of the coaxial cable is intended to be connected to earth in
the building installation.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of the grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements of the grounding electrode.
Ground Clamp
Antenna Lead In Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding Electrode System
(NEC ART 250, part H)
Electric Service Equipment
vi
Table of Contents
Installing the TV......................................................9
Deleting a Custom Picture Mode......................................... 36
Inspecting the Package Contents . . . . . . . . . . . . . . . . . . . . . . . 9
Adjusting the Audio Settings. . . . . . . . . . . . . . . . . . . . . . . . . . 37
Installing the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Changing the Equalizer Settings.......................................... 38
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Delete the Custom Audio Mode........................................... 38
Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting Timers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Remote Control Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting the Sleep Timer........................................................ 39
Replacing the Batteries......................................................... 16
Setting the Auto Power Off Feature..................................... 39
Enabling the Screen Saver.................................................... 39
Connecting Your Devices......................................17
Blanking the Screen.............................................................. 40
Connecting A Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using the Network Connection Menu. . . . . . . . . . . . . . . . . . . 41
Connecting a Device - Audio and Video Cable Types......... 18
Connecting to a Wireless Network....................................... 41
Connecting an Audio Device. . . . . . . . . . . . . . . . . . . . . . . . . . 20
Changing the Manual Setup Settings................................... 41
Connecting an Audio Device - Audio Cable Types.............. 21
Finding MAC Addresses for Network Setup........................ 42
Connecting an Audio Device - ARC. . . . . . . . . . . . . . . . . . . . . 22
Connecting to a Hidden Network......................................... 42
Connecting to your Network. . . . . . . . . . . . . . . . . . . . . . . . . . 23
Setting Up Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Completing the First-Time Setup.........................24
Selecting a Channel Source.................................................. 43
Finding Channels................................................................... 43
Using the On-Screen Menu..................................26
Adding New Channels........................................................... 44
Navigating the On-Screen Menu. . . . . . . . . . . . . . . . . . . . . . . 26
Skipping Channels................................................................. 45
Changing the Input Source . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Changing the Audio Language............................................. 46
Changing the Screen Aspect Ratio . . . . . . . . . . . . . . . . . . . . . 27
Setting Up Closed Captioning . . . . . . . . . . . . . . . . . . . . . . . . . 47
Viewing Video with the Menu Open. . . . . . . . . . . . . . . . . . . . 28
Changing the Appearance of Digital Closed Captions........ 47
Adjusting the Picture Settings. . . . . . . . . . . . . . . . . . . . . . . . . 29
Renaming Inputs (Using the Devices Menu) . . . . . . . . . . . . . 49
Adjusting the More Picture Settings.................................... 30
Changing the TV Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Adjusting the Color Temperature........................................ 31
Viewing System Information................................................ 50
Adjusting the Picture Mode Edit Settings............................ 31
Changing the On-Screen Menu Language........................... 51
Adjusting the Color Calibration Settings............................. 32
Setting the Time Zone........................................................... 51
Adjusting the Color Tuner Settings...................................... 32
Using the Parental Controls................................................. 52
Creating a Custom Picture Mode......................................... 35
Accessing the Parental Controls Menu........................... 52
Locking and Unlocking the Custom Picture Modes............ 36
vii

Troubleshooting & Technical Support.................69
Enabling or Disabling Program Ratings........................... 52
Locking and Unlocking Channels..................................... 52
Specifications........................................................72
Blocking and Unblocking Content by Rating................... 53
Limited Warranty..................................................74
Changing the Parental Control Passcode........................ 53
Resetting the Content Locks............................................ 53
Legal & Compliance..............................................77
Changing the View Mode Settings....................................... 54
Adjusting the Wide Mode (Aspect Ratio)............................. 54
Changing Your TV's DLNA Name.......................................... 55
Controlling Other Devices with CEC..................................... 55
Turning the Power Indicator On or Off................................ 56
Restoring the TV to Factory Default Settings...................... 57
Enabling and Disabling Smart Interactivity......................... 57
Using the Guided Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . 58
Using the Info Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Using the USB Media Player.................................60
Using the USB Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Preparing your USB drive to display USB Media................ 60
Displaying USB Media........................................................... 60
Removing the USB drive from the TV.................................. 60
Using VIZIO Internet Apps Plus® (V.I.A. Plus)......64
Using the V.I.A. Plus App Dock . . . . . . . . . . . . . . . . . . . . . . . . 64
Using the App Launcher Keys.............................................. 64
Using the Fullscreen V.I.A. Plus Apps Window. . . . . . . . . . . . 65
Fullscreen V.I.A. Plus Apps Window Overview. . . . . . . . . . . . 66
Customizing the V.I.A. Plus Apps Window . . . . . . . . . . . . . . . 67
Adding an App to the My Apps Tab..................................... 67
Deleting an App from the My Apps Tab.............................. 67
Moving an App in My Apps................................................... 68
viii
1
Installing the TV
INSPECTING THE PACKAGE CONTENTS
Before installing your new TV, take a moment to inspect the package
contents. Use the images below to ensure nothing is missing or
damaged.
VIZIO LED HDTV
TV Stands
Remote Control
with Batteries
Power Cord
Quick Start Guide
4 x Phillips Screws
PACKAGE CONTENTS
9
1
INSTALLING THE TV
To install the stands:
After removing the TV from the box and inspecting the package
contents, you can begin installing the TV. Your TV can be installed
in two ways:
•
On a flat surface, using the included stand
•
On a wall, using a VESA-standard wall mount (not included)
Installing the TV Stands
Your TV includes stands designed to support the weight of the TV
and keep it from falling over. However, the TV can still fall over if:
•
It is placed on an uneven, unstable, or non-level surface
•
It is pushed, pulled, or otherwise improperly moved
•
If an earthquake occurs and the TV is not properly secured.
Remove any plastic wrapping from the TV and the stands.
Place the TV screen-down on a clean, flat surface. To prevent
scratches or damage to the screen, place the TV on a soft
surface such as a blanket and avoid any sharp edges.
TV ON STAND
10
1
Insert the left and right stands into the base of the TV. (The stands are identical.)
Secure each stand to the TV with two (2) Phillips screws (included).
Insert the screws into the back of the TV and tighten them using a Phillips screwdriver.
When you are finished, place the TV on a stable, level surface.
11
1
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult
the information below to find the appropriate mount for your TV
model:
Installing a TV on a wall requires lifting. To prevent
injury or damage to the TV, ask someone to help you.
D32-D1
D32h-D1
D32x-D1
M4
M4
M4
Screw Size:
Hole Pattern: 100 mm (V) x 100 mm (H) 100 mm (V) x 100 mm (H) 100 mm (V) x 100 mm (H)
Weight w/o Stand:
11.31 lb (5.13 kg)
11.02 lb (5.00 kg)
11.31 lb (5.13 kg)
Be sure the mount you choose is capable of supporting the weight
of the TV. After you have determined that you have the correct
mount for your TV, you can begin the installation.
To install your TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface. Be sure
the surface is clear of debris that can scratch or damage the
TV.
3. Remove the base by loosening and removing the screws.
4. Attach your TV and wall mount to the wall, carefully following
the instructions that came with your mount.
Use only with a UL-listed wall mount bracket rated for the
weight/load of this TV.
WALL MOUNT SCREW LOCATIONS
12
1
REMOTE SENSOR & POWER INDICATOR
When using the remote, point it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after
several seconds. To keep the power indicator on as long as the TV is on,
see Turning the Power Indicator On or Off on page 56.
FRONT PANEL
13
1
REAR PANEL
USB - Connect a USB thumb drive to play photos, music, or video.
HDMI - Connect an HDMI device.
Optical Audio Out - Connect an optical/SPDIF audio device, such
as home audio receiver.
Stereo Audio Out - Connect an RCA audio device, such as
sound bar.
DTV/TV (Coaxial) - Connect a coaxial cable from a cable or satellite
box, or from an antenna.
Component/Composite - Connect a component or composite
device.
Ethernet - Connect an Ethernet cable from a home network.
HDMI - Connect an HDMI device.
POWER - Press to turn the TV on. Press and hold to turn the TV off.
INPUT - Press to change the input source.
REAR PANEL
14
1
APP LAUNCHER
Quickly launch the pictured App.
(Also turns on the TV if it is off.)
INPUT
POWER
Turn TV on or off.
Change the currently displayed input.
A/V CONTROLS
Control USB media player and
video streaming playback.
MENU
Display the on-screen menu.
CLOSED CAPTIONS
Turn closed captions on and off.
INFO
EXIT
Display the info window.
Close the on-screen menu.
ARROW
Navigate the on-screen menu.
OK
Select the highlighted option.
GUIDE
BACK
Go to the previous on-screen menu.
Display the info window.
CHANNEL UP/DOWN
Change the channel.
VOLUME UP/DOWN
Increase or decrease loudness
of the audio.
V BUTTON
Open the VIZIO Internet Apps Plus® (V.I.A. Plus) dock.
MUTE
Turn the audio off or on.
LAST
Return to the channel last viewed.
WIDE
Change the display mode.
PIC
Opens the Picture Mode menu.
NUMBER PAD
Manually enter a channel.
DASH
Use with number pad to manually
enter a digital sub-channel.
(For example, 18-4 or 18-5.)
ENTER
Confirm channel or passcode
entered using the Number Pad.
REMOTE CONTROL
15
1
Replacing the Batteries
1. To remove the battery cover,
press on the logo and slide the
cover out.
2. Insert two batteries into the
remote control. Make sure that
the (+) and (-) symbols on the
batteries match the (+) and
(-) symbols inside the battery
compartment.
3. Replace the battery cover.
16
2
Connecting Your Devices
CONNECTING A DEVICE
Your TV can be used to display output from most devices.
Cable/Satellite Box
1. Verify that your device has a video port that matches an
available port on the TV (HDMI-1, HDMI-2, Comp, etc.).
2. Turn the TV and your device off.
3. Connect the appropriate cable (not included) to the TV and the
device.
Game Console
DVD/Blu-ray Player
4. Turn the TV and your device on. Set the TV’s input to match the
connection you used (HDMI-1, HDMI-2, Comp, etc.).
HDMI CABLE*
• DIGITAL
• HD VIDEO (1080p)**
• HD AUDIO
COMPONENT CABLE*
• ANALOG
• HD VIDEO (1080p)**
• STEREO AUDIO
COAXIAL CABLE*
• ANALOG
• HD VIDEO (1080i)**
• STEREO AUDIO
AV CABLE*
• ANALOG
• VIDEO (480i)**
• STEREO AUDIO
BEST
BETTER
BETTER
GOOD
BACK OF TV
17
*
Cables not included.
**
Maximum resolution.
2
CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES
AV CABLE
COAXIAL CABLE
AV cables (or Composite cables) are the traditional way
of connecting your devices to your TV. Video signals are
sent over the yellow connector while audio is sent over
the red and white connectors.
Coaxial cables are the traditional way of connecting
antennas and cable television signals to your TV. Coaxial
cables carry both audio and video signals through a
single connector.
• Video resolutions up to 480i
•
HD video resolutions up to 1080i
• Analog connection
•
Analog connection
• Audio and video signals
•
Audio and video signals
Y/V
R
Cable/Antenna
COMPONENT VIDEO
COAXIAL CABLE
L
GOOD
BETTER
18
2
COMPONENT CABLE
HDMI CABLE
Component cables are designed to carry HD (high
definition) video signals along with additional audio
connections. Colors are delivered with color information
over three connectors for video (separated into red,
blue and green signals) and the left and right audio
connectors (red and white).
HDMI is the intelligent, all-digital interface that delivers
both dazzling quality and unmatched ease of use. HDMI
technology transmits crystal-clear digital video along with
multi-channel surround audio. HDMI-connected devices
have the ability to automatically adjust themselves for
optimal viewing.
• HD video resolutions up to 1080i
•
HD video resolutions up to 1080p
• Analog connection
•
HD audio
• Audio and video signals
•
Digital connection
•
Audio and video signals
COMPONENT VIDEO
Y/V
Pb/Cb
Pr/Cr
L
R
HDMI
BETTER
BEST
19
2
CONNECTING AN AUDIO DEVICE
Your TV can output sound to an audio device, such as a receiver or
sound bar.
Home Audio Receiver
1. Verify that your device has an audio port that matches an
available port on the TV (HDMI, Optical, or RCA).
2. Turn the TV and your audio device off.
3. Connect the appropriate cable to the TV and the device.
4. Turn the TV and your device on.
VIZIO Sound Bar
HDMI CABLE*
BEST
• ARC 2-WAY COMMUNICATION
• 2.0-5.1 DIGITAL AUDIO
• PCM, DTS, DOLBY DIGITAL
OPTICAL/SPDIF CABLE*
BETTER
• PCM STREAM
• DOLBY DIGITAL 5.1 CHANNEL
• DTS 5.1 CHANNEL
RCA CABLE*
GOOD
*
20
• ANALOG STEREO CONNECTION
• 2.0 CHANNEL
Cables not included.
2
CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES
RCA CABLE
OPTICAL/SPDIF CABLE
HDMI CABLE
RCA cables (or Composite cables) are the traditional
way of connecting your devices to your audio
device. Audio signals are sent over the red and
white connectors.
Optical/SPDIF cables transmit audio signals as
pulses of light through a cable made of plastic
fibers. Audio signals are digitally transmitted
between devices.
HDMI technology transmits crystal-clear digital
multi-channel surround audio through a single
HDMI cable. Audio Return Channel-enabled
(ARC) TVs allow audio to be sent over an already
connected HDMI cable, eliminating the need for
a separate audio cable. See Connecting an Audio
Device - ARC on page 22.
• Quality Stereo Connection
• PCM Stream (Lossless)
• 2.0 Channel
• Dolby Digital 5.1 Channel
• Analog Connection
• DTS 5.1 Channel
• Audio Signal Only
• Digital Connection
COMPONENT VIDEO
• Audio Signal Only
L
R
GOOD
Optical/SPDIF
• CEC 2-way Communication
(Auto setup)
• PCM, DTS, Dolby Digital
• 2.0 - 5.1 Scaleable Lossless
Digital Audio Connection
• Audio and Video Signals
DIGITAL OPTICAL AUDIO
HDMI
BETTER
BEST
21
2
CONNECTING AN AUDIO DEVICE - ARC
Without HDMI ARC
With HDMI ARC
Built-in Tuner
Built-in Tuner
VIZIO Internet Apps Plus®
VIZIO Internet Apps Plus®
Your TV
Your TV
Without an HDMI ARC setup,
your TV needs an extra cable
to connect it to your home
audio receiver. The audio
signal is analog-only.
RCA (Audio)
HDMI
HDMI
Your Home Audio Receiver
Your Home Audio Receiver
HDMI
HDMI
Your Blu-ray Player
Your Blu-ray Player
22
HDMI
ARC
transmits
all-digital audio from your TV
to your home audio receiver,
with no need for an extra
cable. The single HDMI cable
also carries digital HD (high
definition) video to your TV.
2
CONNECTING TO YOUR NETWORK
Connecting to a Wireless Network
Your TV is Internet-ready. It can be connected to your home
network with a Wired or Wireless connection.
1. Ensure you have a router or modem broadcasting as
high-speed wireless signal (802.11n recommended).
Connecting to a Wired Network (Best)
2. Use the Guided Network Setup to configure the TV. See Using
the Guided Setup Menu on page 58.
1. Connect an Ethernet cable to your router and to the Ethernet
port on the back of the TV. See below.
2. Use the Guided Network Setup to configure the TV. See Using
the Guided Setup Menu on page 58.
Ethernet Cable
Router / Modem
23
Completing the First-Time Setup
4. Use the Arrow buttons on
the remote to highlight your
country, and then press the OK
button.
The first time you turn on the TV, the Setup App will guide you
through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
•
Your TV should be installed and the power cord should be
connected to an electrical outlet.
•
Your devices should be connected.
•
If you have a wireless network, have the wireless password
ready.
•
If you are connecting to your network with an Ethernet
cable, connect it to the Ethernet port on the TV.
5. Use the Arrow buttons on the
remote to highlight your Time
Zone, and then press the OK
button.
To complete the first-time setup:
1. Press the Power button on the
remote. The TV powers on and
the Setup App starts.
2. Use the Arrow buttons on the
remote to highlight Home Use
and press OK.
6. Use the Arrow buttons on the
remote to highlight your wireless
network in the list of available
networks and press OK.
Type the wireless password
using the on-screen keyboard,
then highlight Connect and
press OK.
Choose your mode.
Select Store Demo for in-store display.
Select Home Use for in-home use.
Seleccione "Home Use" para Modo de Casa o "Store Demo" para Demostración en la Tienda.
Choisissez "Home Use" pour le Mode Domicile ou "Store Demo" pour la Démo en Magasin.
Store Mode
Home Mode
7. Use the Arrow and OK buttons
on the remote to read and
accept the Terms and Conditions
and the Privacy Policy. When you
are finished, highlight I Accept
and press OK.
3. Use the Arrow buttons on
the remote to highlight your
preferred language, and then
press the OK button.
24
3
3
11.Use the Arrow and OK buttons
on the remote to select the input
your TV source is connected to.
8. Type your E-mail Address,
First Name, Last Name, Phone
Number, and ZIP Code using the
on-screen keyboard.
Highlight Next and press OK.
9. Use the Arrow buttons on the
remote to highlight your TV
source and press OK.
The First-Time Setup is complete.
If you have cable TV, select
whether you have a cable box or
if you connect the TV directly to
a cable from the wall.
10.If the TV Signal screen appears,
the TV will need to scan for
channels, which takes several
minutes. Use the arrow buttons
on the remote to highlight Begin
Scan and press OK.
25
4
Using the On-Screen Menu
CHANGING THE INPUT SOURCE
Your TV features an easy-to-use on-screen menu.
To open the on-screen menu, press the MENU button on the remote.
From this menu, you can:
VIZIO
•
Adjust the Picture settings
•
Adjust the Audio settings
Picture
•
Activate the Sleep Timer
Timers
•
Adjust the Network settings
•
Adjust the Channels
•
Set up Closed Captioning
System
•
Name the TV Inputs
User Manual
•
Adjust the TV Settings
•
Access the Guided Setup
•
Access the User Manual
TV SETTINGS
External devices such as DVD players, Blu-ray Players, and video
game consoles can be connected to your TV. To use one of these
devices with your TV, you must first change the input source in the
Wide on-screen
Zoom
Normalmenu.
Panoramic
Audio
To change the input device:
Network
Channels
CC
Exit
Closed Captions
Devices
Guided Setup
1. 2DPress3Dthe INPUT button on
the remote. The input menu is
displayed.
ABC
CC Up/Down Arrow
2. Wide
Use the
buttons or the INPUT button on
the remote to highlight the input
Sleep
Picture
Audio to view and press OK.
you wish
Timer
The selected input is displayed.
TV
Input
Network
Settings
Help
Input Name
HDMI-1
HDMI-2
COMP
Note: Inputs may vary by TV.
NAVIGATING THE ON-SCREEN MENU
To open the on-screen menu, press
the MENU button on the remote.
You can change the input names that appear on the
Input menu to make your devices easy to recognize.
See Renaming Inputs (Using the Devices Menu) on page
49 for more information.
Use the Arrow buttons to highlight
a menu option, and press the OK
button to select that option.
While navigating the on-screen menu, you can press the
BACK button at any time to return to the previous menu
screen. The EXIT button will close the
on-screen menu.
26
4
CHANGING THE SCREEN ASPECT RATIO
The TV can display images in five different modes: Normal, Stretch,
Panoramic, Wide, and Zoom. Each mode displays the picture
differently.
• Wide stretches a 4:3 aspect ratio picture to the edges of
the screen. Since the picture is being stretched, the display
image may appear distorted. If the program is already
formatted for widescreen viewing (1.85:1 or 2.35:1),
then black bars will appear on the top and bottom of the
display image.
To change the screen aspect ratio:
1. Press the WIDE button on the
remote.
2. Use the Arrow buttons to
highlight the aspect ratio you
wish to view and press OK.
•
Normal preserves the content’s
original aspect ratio. Since the
4:3 aspect ratio is not large
enough to fill the TV’s screen,
black bars are added to the left
and right of the display image.
Normal
Normal
Panoramic
Stretch
Wide
Wide
Zoom
Zoom
• Zoom expands images with black bars to fit the screen.
Note: Aspect ratio settings may
vary by Input source.
•
Stretch expands the display image to fill the screen.
Images may appear wider than intended. If you are
watching widescreen (1.85:1 or 2.35:1) content, black
bars will still appear on the top and bottom of the display
image. This option is only available when the TV is
displaying a 720p/1080i source.
•
Panoramic expands the display image to fill the width of
the screen. Images may appear wider than intended. If
you are watching widescreen (1.85:1 or 2.35:1) content,
black bars will still appear on the top and bottom of the
display image. This option is only available when the TV
is displaying a 480i/480p source.
27
4
VIZIO
Wide
VIEWING VIDEO WITH THE MENU OPEN
Zoom
Normal
Panoramic
When the on-screen menu opens, it covers the left-hand portion of
the picture. The picture can be displayed in three different ways:
•
•
•
Overlay - The picture stays in its normal position and the
menu covers the left-hand portion of the picture. (The
picture is full-sized.)
Exit
2D
VIZIO
Brightness
Contrast
Color
Tint
ABC
Sharpness
Picture
3. Press the Up Arrow button on
the remote to the menu.
Normal
Exit
2D
3D
Panoramic
+ 85
+ 50
+ 50
+ 59
+
0
+
9
ABC
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
Professional Picture
Select from preset picture modes. Standard
picture mode meets ENERGY STAR®
requirements. For the best picture, use
Calibrated mode. To reduce video delay
(lag) when gaming, use Game mode.
OVERLAY
Audio
To change the position of the picture while the on-screen menu is
displayed:
2. Press OK to cycle through the
three display methods.
Zoom
Standard
Advanced Picture
Centered Overlay - The picture is full-sized and centered in
the area next to the menu, so that the right and left edges
are cut off.
Sleep
1. Use the Arrow buttons on the
remote to highlight
Resize
Video.
-
Backlight
Viewport - The entire picture is resized to fit into the space
Input
Wide
CC
to the right of the menu.
Timer
Wide
PICTURE
Picture Mode
3D
VIZIO
Wide
Zoom
Normal
Exit
2D
3D
Panoramic
PICTURE
VIZIO
Picture Mode
Network
Settings
Brightness
Contrast
PICTURE
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Wide
Standard
Auto Brightness Control
Backlight
Color
Tint
Normal
Sharpness
Backlight
Help
-
Zoom
85
+
50
+
50
+
59
+
0
+
9
+ 85
+ 50
+ 50
+ 59
+
ABC
0
Panoramic
+ 9
Advanced Picture
Off
+
Standard
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
Professional Picture
Select from preset picture modes. Standard
picture mode meets ENERGY STAR®
requirements. For the best picture, use
Calibrated mode. To reduce video delay
(lag) when gaming, use Game mode.
Exit
2D
3D
VIEWPORT
ABC
VIZIO
More Picture
Input
Wide
CC
Wide
Zoom
Normal
Exit
2D
3D
Panoramic
PICTURE
Picture Mode Edit
Picture Mode
Backlight
Color Calibration
Brightness
Contrast
Color
Sleep
Timer
Select from preset picture modes. Standard
picture mode meets ENERGY STAR®
requirements. For the best picture, use
Calibrated mode. To reduce video delay
(lag) when gaming, use Game mode.
Tint
Sharpness
-
Picture
Advanced Audio
Picture
Standard
+ 85
+ 50
+ 50
+ 59
+
0
+
9
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
Professional Picture
Select from preset picture modes. Standard
picture mode meets ENERGY STAR®
requirements. For the best picture, use
Calibrated mode. To reduce video delay
(lag) when gaming, use Game mode.
Network
ABC
Settings
Help
CENTERED OVERLAY
28
4
ADJUSTING THE PICTURE SETTINGS
a brighter, more vivid picture.
Your TV display can be adjusted to suit your preferences and viewing
conditions.
•
Game mode reduces throughput delays and optimizes the
picture settings for displaying game console output.
•
Computer mode optimizes the picture settings for
displaying computer output.
To adjust the picture settings:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Picture and
press OK. The PICTURE menu is
displayed.
3. Use the Arrow buttons on
the remote to highlight Auto
Brightness Control, then use the
Left/Right Arrow buttons to set
Auto Brightness Control Low,
Medium, High, or Off.
4. Use the Arrow buttons on the
remote to highlight Picture
Mode, then use the Left/Right
Arrow buttons to change the
picture mode:
•
•
5. To manually change each of the picture settings, use the Up/
Down Arrow buttons on the remote to highlight that picture
Wide
Zoom
Panoramic
setting,
thenNormal
use the
Left/Right Arrow buttons to adjust the
setting:
VIZIO
PICTURE
Picture Mode
Standard
Auto Brightness Control
Backlight
Brightness
Contrast
Color
Tint
Sharpness
-
Off
•
+
85
+
50
+
50
Exit
+
59
+
0
•
+
9
More Picture
•
Wide
CC
Brightness
- Adjusts the black level of the picture. When
this setting is too low, the picture may be too dark to
distinguish details. When this setting is too high, the picture
may appear faded or washed out.
Sleep
Color Calibration
•
Select from preset picture modes. Standard
picture mode meets ENERGY STAR®
requirements. For the best picture, use
Calibrated mode.
Standard mode sets the
various picture settings to
values that meet
ENERGY STAR® requirements.
Calibrated mode sets the
picture settings to values
perfect for watching TV in a
brightly-lit room.
•
Vivid mode sets the picture settings to values that produce
Picture
Audio
Contrast - Adjusts the white level of the picture. When this
setting is too low, the picture may appear dark. When this
setting is too high, the picture may appear faded or washed
out. If the setting is too high or too low, detail may be
Network Settings
Help
difficult to distinguish in dark or bright areas of the picture.
Timer
Calibrated Dark mode sets the picture settings to values
perfect for watching TV in a dark room.
Backlight - Adjusts the LED brightness to affect the overall
ABC
brilliance of
the picture. Backlight cannot be adjusted from
some picture modes.
Input
Picture Mode Edit
•
Auto Brightness Control - detects the light levels in the
room and automatically adjusts the backlight for best
2D
3D
picture.
Select
Off, Low, Medium, or High.
•
Color - Adjusts the intensity of the picture colors.
•
Tint - Adjusts the hue of the picture. This setting is useful in
adjusting the flesh tones in the picture. If flesh appears too
orange, reduce the level of color before adjusting tint.
•
Sharpness - Adjusts the edge sharpness of picture
elements. It can be used to sharpen non-HD (high
definition) content; however, it will not produce detail that
does not otherwise exist.
6. When you have finished adjusting the picture settings, press
the EXIT button on the remote.
29
4
Adjusting the More Picture Settings
•
Game Low Latency - Reduces video delay (lag) when
gaming. Select On or Off. This option is not available for
devices connected using a coaxial cable.
•
Picture Size & Position - Opens a sub-menu with two
options:
To adjust the More Picture settings:
1. From the PICTURE menu, use the
Arrow buttons on the remote to
highlight More Picture and press
OK. The MORE PICTURE menu is
displayed.
2. Use the Arrow buttons to highlight
the setting you wish to adjust, then
press Left/Right Arrow buttons to
change
the setting:
•
•
Color Temperature See Adjusting the Color
Temperature on page 31.
VIZIO
MORE PICTURE
Color Temperature
Black Detail
Wide
Cool
Low
Backlight Control
On
Clear Action
Off
•
Exit
Reduce Noise
Game Low Latency
Picture Size & Position
Film Mode
Gamma
Auto
2.2
Input
Black Detail - Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select Off, Low, Medium, or
High.
Film Mode - Optimizes the picture for watching film. Select
Auto or Off.
•
Gamma - Sets the shape of the gamma curve. Use lower
Picture
values
for Audio
bright room conditions and higher values when it
is dark. Select 1.8, 2.0, 2.1, 2.2, or 2.4.
Network
Reduce Noise - Opens a sub-menu with two settings:
• Reduce Signal Noise - Reduces background picture noise
when viewing analog sources. The function helps to correct
"speckle" noise with a slight reduction in sharpness. Select
Off, Low, Medium, or High.
• Reduce Block Noise - Reduces pixelation and distortion
for mpeg files. Select Off, Low, Medium, or High.
Not available on D32h-D1
Picture Position adjusts the vertical and horizontal
positions of the picture to ensure the image is centered
2D
3D
and
completely
fills the screen. Use the Left/Right Arrow
buttons to adjust the horizontal position of the displayed
picture. ABC
Use the Up/Down Arrow buttons to adjust the
vertical position of the displayed picture. Press the OK
button
when
you are finished.
Wide
CC
3. When you have finished adjusting the More Picture Settings, press
the EXIT button on the remote.
• Clear Action1 - Reduces blur in scenes with fast action.
Some sensitive viewers may notice flicker. Select On or Off.
1
Normal
Panoramic
Picture
Size increases
or decreases the vertical and
horizontal size of the displayed picture.
Zoom
•
Sleep
Timer
• Backlight Control Dynamically improves the
contrast ratio of the picture
by adjusting the backlight.
Select On or Off.
•
•
30
Settings
Help
4
Adjusting the Color Temperature
Adjusting the color temperature changes the white balance of the
picture.
Adjusting the Picture Mode Edit Settings
To adjust the Picture Mode Edit settings:
1. From the PICTURE menu, use the
Arrow buttons to highlight More
Picture, and then press the
OK button. The MORE PICTURE
Wide
Normal
Panoramic
menuZoom
is displayed.
To adjust the color temperature:
1. From the MORE Picture menu,
use the Arrow buttons to
highlight Color Temperature,
then press OK.
2. Use the Arrow buttons on
the remote to highlight Color
Temperature, then press OK.
VIZIO
COLOR TEMPERATURE
Cool
Normal
2. Highlight Picture Mode Edit, and
then press the OK button. The
PICTURE
Exit
2D MODE
3D EDIT menu is
displayed.
Computer
Cool produces a blue-hued
picture.
•
Normal is optimized for
television viewing.
•
Computer optimizes the
picture for use as a
PC monitor.
PICTURE MODE EDIT - Calibrated*
Save Picture Mode
Lock Picture Mode
Reset Picture Mode - Calibrated*
3. Use the ArrowABC
buttons to
highlight the setting you wish to
adjust,Wide
then press
the Left/Right
Input
CC
Arrow buttons to change
the setting:
3. Use the Left/Right Arrow
buttons to highlight a color
temperature preset and then
press OK:
•
VIZIO
•
Sleep
Timer
Save Picture Mode - Saves
Audio
thePicture
settings
for a custom
picture mode.
•
Lock Picture Mode / Unlock Picture Mode - Prevents or
allows changes to the currently selected custom picture
Network Settings
Help
mode. Select
On or Off.
4. When you have finished
adjusting the color temperature,
press the EXIT button on the
remote.
•
Reset Picture Mode - Resets the settings of the current
built-in picture mode to the factory default values.
•
Delete Picture Mode - Deletes the current custom picture
mode. Any inputs that use the deleted picture mode are
switched to the Calibrated picture mode.
4. When you have finished adjusting the Picture Mode Edit
settings, press BACK to adjust additional settings or EXIT.
31
4
Adjusting the Color Calibration Settings
Adjusting the Color Tuner Settings
The Color Tuner settings allow you to adjust the Hue, Saturation,
and Brightness (HSB) color and 11 point white balance, turn color
channels off for testing, and display color bar, flat, and ramp test
patterns.
Color Calibration Settings allow you to make precise adjustments to
the picture and to create picture modes to save groups of picture
settings.
To adjust the HSB color settings:
The Color Tuner, 11 Point White Balance, and test
patterns allow technicians to manually calibrate the TV.
Calibration requires specialized training, an input with
precisely set colors, and a specialized light meter.
1. From the PICTURE menu, use the Arrow buttons to highlight
Color Calibration and press the OK button. The COLOR
CALIBRATION menu is displayed.
2. Use the Arrow buttons to highlight Color Tuner, and press the
OK button. The Color Tuner menu is displayed.
To adjust the color calibration picture settings:
1. From the PICTURE menu, use
the Arrow buttons to highlight
Color Calibration and press
the OK button. The COLOR
CALIBRATION menu is displayed.
2. Use the Arrow buttons to
highlight the setting you wish to
adjust, then press the OK button
to change the setting:
•
VIZIO
Wide
Picture Mode*
Hue
Color Temperature*
Color Tuner
Reset Color Tuner
Color Temperature - Not directly selectable (reference
only). Changes to Offset and Gain are saved here and
indicated with an asterisk (*).
•
Color Tuner - Adjust the HSB color, RGB offsets, and
11-point white balance, and display calibration test
patterns.
Zoom
Red
Normal
0
Green
Blue
Cyan
Magenta
Yellow
0
0
0
25
-14
5
-4
0
-2
0
0
0
0
Panoramic
Saturation
-1
Brightness
-24
0
-22
0
0
0
0
0
0
Offset
Exit
Gain
2D
3D
3. Use the ArrowABC
buttons on the remote to highlight the Hue,
Saturation, Brightness, (these 3 adjust the color) Offset, or
Gain (these
two
Input
Wide
CCadjust the color temperature) of the color you
wish to adjust. Press the OK button.
Picture Mode - Not directly
selectable (reference only).
Changes to Hue, Saturation,
and Brightness are saved
here and indicated with an
asterisk (*).
•
•
Color Tuner
COLOR CALIBRATION
4. Use the Left/Right Arrow buttons to adjust the value. When
you are finished press the OK button to save the setting.
Sleep
Timer
Picture
Audio
5. When you have finished adjusting the Color Tuner settings,
press the BACK button to adjust additional settings or EXIT.
When Hue, Saturation, or Brightness have been changed, an
Network Settings
Help
asterisk (*) appears after the name of the Picture Mode.
When Offset or Gain have been changed, an asterisk (*) appears
after the name of the Color Temperature.
Reset Color Tuner - Prevent/allow changes to the currently
selected custom picture mode.
32
4
To turn color channels off and on:
To adjust the 11 Point White Balance settings:
1. From the PICTURE menu, use the Arrow buttons to highlight
Color Calibration and press the OK button. The COLOR
CALIBRATION menu is displayed.
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the 11 Point White Balance menu is displayed.
2. Use the Arrow buttons to highlight Color Tuner, and then
press the OK button. The Color Tuner menu is displayed ..
11 Point White Balance
Gain
Red
Green
Blue
5%
0
0
0
Color Tuner
Hue
Red
Green
Blue
Cyan
Magenta
Yellow
0
0
0
0
25
-14
Saturation
-1
5
-4
0
-2
0
Brightness
-24
0
-22
0
0
0
Offset
0
0
0
Gain
0
0
0
2. Use the Arrow buttons on the remote to highlight the Gain and
Color values you wish to adjust. Press the OK button and use
the Left/Right Arrow buttons to adjust the value. When you
are finished press the OK button to save the setting.
3. Use the Arrow buttons on the remote to highlight Red, Green,
or Blue.
3. When you are finished, press the BACK button to adjust
additional settings or EXIT.
4. Press the OK button to turn the color channel off or on. An X
appears over a color channel that has been turned off.
All changes here are saved to Color Temperature.
5. Use the Arrow buttons to highlight another color channel to
turn off or on. Only two color channels can be turned off at the
same time.
6. When you are finished with the color channels, press the BACK
button to adjust additional settings or EXIT.
33
4
To show or hide the Color Bar Test Pattern:
To show or hide the Flat Test Pattern:
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons
to highlight Color Tuner, and then press the Left/Right Arrow
buttons until the SMPTE Test Pattern menu is displayed.
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons
to highlight Color Tuner, and then press the Left/Right Arrow
buttons until the Flat Test Pattern menu is displayed.
Color Bar Test Pattern
Flat Test Pattern
Off
Off
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to highlight On to show the Color
Bar.
—or—
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to select the percentage brightness
for the flat test pattern. Selecting a percentage immediately
shows the flat pattern at that brightness.
To hide the Color Bar Test Pattern, use the Left/Right Arrow
buttons to highlight Off.
—or—
To disable the Flat Test Pattern, use the Left/Right Arrow
buttons to highlight Off.
3. When you are finished, press the BACK button to adjust
additional settings or EXIT.
3. When you are finished, press the BACK button to adjust
additional settings or EXIT.
34
4
To show or hide the Ramp Test Pattern:
Creating a Custom Picture Mode
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the Ramp Test Pattern menu is displayed.
Custom picture modes allow you to save a group of custom settings
for various viewing conditions and video sources.
When changes are made while a preset picture mode is selected, an
asterisk appears after the name of the picture mode. These settings
can be saved as a new custom picture mode and the preset mode
can be reset to its default settings.
Ramp Test Pattern
Off
A custom picture mode only applies to the input (HDMI1, HDMI-2, COMP, AV, etc.) in use when it was created.
Each input can have up to six custom picture modes.
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to select the color for the ramp test
pattern. Selecting a color immediately shows that color ramp.
To create a custom picture mode:
1. Set the Picture Mode to an
existing custom setting. See
Adjusting the Picture Settings on
page 29.
—or—
To hide the Ramp Test Pattern, use the Left/Right Arrow
buttons to highlight Off.
2. From the PICTURE menu, use
the Arrow buttons to highlight
Picture Mode Edit and press OK.
The PICTURE MODE EDIT menu
is displayed.
3. When you are finished, press the BACK button to adjust
additional settings or EXIT.
3. On the PICTURE MODE EDIT
menu, select Save Picture Mode.
The
SAVE PICTURE MODE menu is
displayed.
4. Use the Arrow buttons to
enter a custom name using the
on-screen keyboard.
5. Highlight Save and press OK.
6. Press the EXIT button to exit the
menu screens.
35
VIZIO
SAVE PICTURE MODE
<type custom name>
a b
j k
s t
1 2
[email protected]#
Save
c
l
u
3
d
m
v
4
äêí
e
n
w
5
f g
o p
x y
6 7
Space
h
q
z
8
i
r
0
9
4
Locking and Unlocking the Custom Picture Modes
Deleting a Custom Picture Mode
Custom picture modes can be locked with a unique PIN to prevent
accidental changes to their settings.
Custom picture modes that are no longer needed can be deleted.
Inputs assigned to a deleted custom picture mode
become assigned to the Calibrated picture mode.
To lock all custom picture modes:
1. From the PICTURE menu, use
the Arrow buttons to highlight
Picture Mode Edit and select
Lock or Unlock Picture Mode,
then press OK. The LOCK
PICTURE MODE menu is
displayed.
2. Use the Number Pad on your
remote to enter a unique 4-digit
PIN.
3. Highlight Save and then press
the OK button.
4. Press the EXIT button to exit the
menu screens.
VIZIO
LOCK PICTURE MODE
ToWide
deleteZoom
a custom
picture
mode:
Normal
Panoramic
Create a picture control PIN to
prevent change to all custom
picture modes.
1. From the PICTURE menu, use
the Arrow buttons to highlight
Picture Mode Edit and select
Exit
2D
3D
Picture Mode, then press OK.
The DELETE PICTURE MODE
ABC
window is displayed.
Save
To delete the user created Custom 1 picture mode,
select the Delete button.
Delete
Cancel
2. Input
Use the
Left/Right
Arrow buttons to highlight DELETE and
Wide
CC
press OK.
3. Press the BACK button to adjust additional settings or EXIT.
Create a 4 digit passcode using the numbers keys on the remote.
Sleep
Timer
Picture
Audio
Network
Settings
Help
To unlock all custom picture modes:
5. From the PICTURE menu, use
the Arrow buttons to highlight
Picture Mode Edit and select
Lock or Unlock Picture Mode,
then press OK. The LOCK
PICTURE MODE menu is
displayed.
6. Use the Number Pad on your remote to enter your 4-digit PIN.
7. Make any desired changes to the picture modes.
8. To re-lock picture modes, you must create a new 4-digit PIN.
36
4
ADJUSTING THE AUDIO SETTINGS
volume leveling off.
Adjusting audio settings creates a custom audio mode which can be
further modified or restored to factory defaults (deleted).
•
Balance - Adjusts the loudness of the audio output from
the left and right speakers.
•
Lip Sync - Adjusts the synchronization between the display
image and the accompanying audio track.
•
Digital Audio Out - Changes the type of processing for
digital audio out and HDMI ARC output when connected to
a home theater audio system or sound bar. Select PCM or
Bitstream.
Zoom
Normal
Panoramic
To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu
is displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The AUDIO menu
is displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
VIZIO
AUDIO
TV Speakers
On
Surround Sound
On
Volume Leveling
On
Balance
Lip Sync
-
+
0
+
0
Digital Audio Out
PCM
Analog Audio Out
Fixed
Wide
•
Exit
Equalizer
Delete Audio Mode
Input
• TV Speakers - Turns the
built-in speakers on or off.
•
Sleep
Timer
When the TV speakers are set to On, DTS signals cannot
be passed through digital audio outputs.
•
•
Analog Audio Out - Sets the volume control properties for
the RCA (red & white) connector when connected to a home
theater audio system. Select Variable to control the
2D
3D
external
speakers’
volume from the TV’s volume controls, or
select Fixed to control the external speakers’ volume from
your homeABC
theater system controls.
You must select Bitstream for audio with more than two
Wide
CC
channels (3.0, 5.0, or 5.1, for example).
Equalizer - Adjusts the boost or attenuation of different
frequencies
using either preset or custom settings. See
Picture
Audio
Locking and Unlocking Channels on page 52.
•
Delete Audio Mode - Restores audio equalizer settings
to the factory defaults by deleting the custom mode
created. See Delete the Custom Audio Mode on
Networkpreviously
Settings
Help
page 38.
Surround Sound - Surround sound uses DTS TruSurround™
to deliver an immersive surround sound experience from
the TV’s internal speakers. TruSurround completes the
entertainment experience by providing deep, rich bass
and by delivering crisp details and clear, intelligible dialog.
Select On or Off.
4. When you have finished adjusting the audio settings, press the
EXIT button on the remote.
Volume Leveling - Volume leveling uses DTS TruVolume™
to maintain consistent volume levels during transitions
between program content, AV formats, and input sources.
Select On or Off. In a few cases, volume leveling may
artificially suppress volume increases, making it difficult to
hear dialog or flattening sudden noises. If this occurs, turn
37
4
Changing the Equalizer Settings
Delete the Custom Audio Mode
To select a pre-set audio mode:
To delete the custom audio mode:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons to highlight Audio and press OK. The
AUDIO menu is displayed.
2. Use the Arrow buttons on the remote to highlight Audio and
press OK. The AUDIO menu is displayed.
3. Use the Arrow buttons to highlight Equalizer and press OK.
The AUDIO MODE and equalizer settings screen appears.
3. Use the Arrow buttons to highlight Delete Audio Mode and
press OK. The TV displays, “To delete the user created custom
audio mode, select the Delete button."
4. Use the Left and Right Arrow buttons to select an audio mode.
The equalizer bars change to reflect the mode.
4. Highlight Delete and press OK.
5. Press the EXIT button on the remote.
5. Press the EXIT button on the remote.
To customize an equalizer setting:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons to highlight Audio and press OK. The
AUDIO menu is displayed.
3. Use the Arrow buttons to highlight Equalizer and press OK.
The AUDIO MODE and equalizer settings screen appears.
4. Use the Down, Left, and Right Arrow buttons to select any
audio mode as a starting point and press OK.
5. Use the Up and Down Arrow buttons to adjust the boost (up)
and attenuation (down) for the frequency.
6. Use the Left and Right Arrow buttons to select another
frequency, if desired, and adjust it. A new audio mode called
"Custom" is created.
7. Press the EXIT button on the remote.
38
4
SETTING TIMERS
Setting the Auto Power Off Feature
This TV has timers that save energy, can turn off the TV when you go
to sleep, and can blank the screen when you stream music.
To help save energy, your TV is set by default to turn off after
10 minutes without a video or audio signal. This feature can be
deactivated.
Setting the Sleep Timer
To set the Auto Power Off feature:
When activated, the TV’s sleep timer will turn the TV off after a set
period of time.
1. From the TIMERS menu, use the Up/Down Arrow buttons on
the remote to highlight Auto Power Off.
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Left/Right Arrow buttons on the remote to change
whether the TV will turn off. If you don’t want the TV to turn off
whenZoom
there is
no signal,
change the setting to Off. Otherwise,
Wide
Normal
Panoramic
select 10 minutes.
2. Use the Arrow buttons on the
remote to highlight Timers and
press OK. The TIMERS menu is
displayed.
VIZIO
TIMERS
Sleep Timer
Auto Power Off
Screen Saver
Off
10 minutes
3. When you have finished setting the auto power off time, press
the EXIT button on the remote.
Off
Blank Screen
Exit
2D
3D
Enabling the Screen Saver
3. From the TIMERS menu, use the
Up/Down Arrow buttons on the
remote to highlight Sleep Timer.
ABC
If there is no on-screen
content or static content when audio is
streaming, the backlight is turned off, saving energy. You can set
theInput
time before
the
Wide
CC screen saver begins.
4. Use the Left/Right Arrow
buttons on the remote to
highlight the period of time after
which you want the TV to go to
sleep: 30, 60, 90, 120, or 180
minutes. If you don’t want the
sleep timer to activate, change
the setting to Off.
To set the screen saver delay:
1. From the TIMERS menu, use the Up/Down Arrow buttons on
Sleep
Picture
the remote
toAudio
highlight Screen Saver.
Timer
2. Use the Left/Right Arrow buttons on the remote to change
the time before the screen saver begins. If you don’t want the
screen saver to
activate, change the setting to Off. Otherwise,
Network Settings
Help
select 2, 10, or 20 minutes.
5. When you have finished setting
the sleep timer, press the EXIT
button on the remote.
3. When you have finished setting the screen saver delay, press
the EXIT button on the remote.
Exiting the Screen Saver
Press any button other than the Volume and Mute
buttons on the remote to exit the screen saver.
39
4
Blanking the Screen
You can blank the screen while there is audio streaming. This
feature helps save energy and the life of the screen.
To blank the screen:
•
From the TIMERS menu, use the Up/Down Arrow
buttons on the remote to highlight Blank Screen, and
then press OK.
Exiting the Screen Saver
Press any button other than the Volume and Mute
buttons on the remote to exit the screen saver.
40
4
USING THE NETWORK CONNECTION MENU
Changing the Manual Setup Settings
Advanced users can fine-tune the network settings using the Manual
Setup feature.
Your TV is Internet-ready, featuring both an Ethernet port and
built-in high-speed Wireless-N.
To change advanced network settings:
Connecting to a Wireless Network
1. From the NETWORK menu,
highlight Manual Setup and
press OK. The MANUAL SETUP
menu is displayed.
To connect to a wireless network whose network name (SSID) is
being broadcast:
If your TV is connected to a network with an Ethernet
cable, you will not see the wireless network connection
menu. You must disconnect the Ethernet cable to set up
a wireless network connection.
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Network
and press OK. The NETWORK
menu is displayed.
3. If you do not see your wireless
network displayed, highlight
More Access Points and press
OK. The WIRELESS ACCESS
POINTS menu, which is a list of
available wireless networks, is
displayed.
VIZIO
NETWORK
Wired Connection
Wireless Access Points
____.____.____.____
Subnet Mask
____.____.____.____
RJ45 MAC
0:0:0:0:0:0
3. Use the Arrow and OK buttons
to adjust each setting:
Wireless MAC
0:0:0:0:0:0
Panoramic
•
Subnet Mask - The subnet
2D
3D
mask.
Default Gateway ____.____.____.____
Pref. DNS Server
____.____.____.____
Alt. DNS Server
____.____.____.____
Save
Cancel
•
Default Gateway - Your
ABC
network’s default
gateway
address.
•
Wide
CC
Pref.
DNS Server
- Your
preferred domain name
server address.
•
Alt. DNS Server - Your alternate domain name server
Picture
Audio
address.
Test Connection
4. Highlight the name of your
wireless network (this is the
network’s SSID) and press OK.
Normal
IP Address - The IP address
assigned to the TV.
Input
Hidden Network
Zoom
•
WPS
Manual Setup
Off
IP Address
Exit
More Access Points
MANUAL SETUP
DHCP
2. To change the settings manually,
use the Arrow buttons on the
remote to highlight DHCP and
then use the Left/Right Arrow
buttons to change the setting to
Off.
Wide
Disconnected
VIZIO
Sleep
Timer
4. Use the Arrow buttons on the remote to highlight Save and
press OK.
5. Using the on-screen keyboard,
enter your network’s password,
then highlight Connect and
press OK.
Network
Settings
Help
5. Press the BACK button to adjust additional settings or EXIT.
6. Press the BACK button to adjust additional settings or EXIT.
41
4
Finding MAC Addresses for Network Setup
Connecting to a Hidden Network
The security settings on your router may require you to enter the
TV's MAC address in the router's settings.
To connect to a wireless network whose network name (SSID) is not
being broadcast:
To find the TV's MAC address:
1. From the NETWORK menu,
highlight Hidden Network and
press OK. The ENTER ACCESS
POINT NAME screen is displayed.
1. From the NETWORK menu, highlight Manual Setup and press
OK. The MANUAL SETUP menu is displayed.
2. Find the MAC address for the TV at the bottom of the list. The
MAC addresses for the connections in use are displayed:
•
RJ45 MAC - The Ethernet or RJ45 MAC address may be
needed to set up your network when you have connected
the TV to your network with an Ethernet (Cat 5) cable.
•
Wireless MAC - The Wireless (Wi-Fi) MAC address may be
needed to connect your TV to your network with Wi-Fi.
2. Using the on-screen keyboard,
enter your network’s name
(SSID), then highlight Connect
and press OK.
3. Using the on-screen keyboard,
enter your network’s password,
then highlight Connect and
press OK.
4. Press the BACK button to adjust
additional settings or EXIT.
VIZIO
ENTER ACCESS POINT NAME
Enter your access point name. This is
used to connect to an access point
with a hidden SSID.
a b
j k
s t
1 2
[email protected]#
c
l
u
3
d
m
v
4
äêí
e
n
w
5
f g
o p
x y
6 7
Space
h
q
z
8
i
r
0
9
Connect
Testing Your Network Connection
To test your network connection:
1. From the NETWORK menu, highlight Test Connection and
press OK.
2. The TEST CONNECTION screen displays the connection
method, network name, signal strength, and download speed
of your network connection.
3. Press the EXIT button on the remote.
42
4
SETTING UP CHANNELS
Selecting a Channel Source
1. On the remote control, press Input and use the Arrow button
to highlight TV (antenna icon), then press OK.
You can use the TV’s Tuner menu to:
•
Select a channel source
•
Find channels
•
Perform a partial channel scan
Channels not searched
•
Manually add channels
Channel Source
•
Select channels to skip
Find Channels
•
Select language for analog
and digital channels.
Partial Channel Search
Finding Channels
Add Analog Channel
Before the TV can detect and display channels and their associated
information, you must scan for channels. A channel scan may
also be necessaryABC
when the TV has been moved to an area where
different free-to-air broadcast television channels are available.
2. Press the MENU button, select Channels and press OK. The
CHANNELS menu is displayed.
VIZIO
CHANNELS
Zoom
Normal
Panoramic
3.Wide
On the
CHANNELS
menu, highlight Channel Source and using
the left/right Arrow buttons to select either Antenna or Cable.
Cable
Skip Channel
Analog Audio
Digital Language
Stereo
English
Exit
2D
Input
Wide
3D
CC
To perform an Auto Channel Scan:
1. From the CHANNELS menu,
highlight Find Channels, and
Sleep
Timer
press Picture
OK. TheAudio
channel scan
begins.
2. Wait until the channel scan is
100%Settings
complete.
Network
HelpHighlight Done
and press OK.
VIZIO
FIND CHANNELS
Channels Found
Digital: 0
Analog: 0
13% Complete
Cancel
3. Press the EXIT button on the
remote.
If the channel scan is cancelled,
only the channels that were
already discovered are saved. A
new channel scan clears all saved
channels.
Cancel the channel scan.
43
4
Adding New Channels
To add a single new analog channel:
Occasionally, you may need to add a new range of channels or add
a new analog channel. You can do this by using the Partial Channel
Search and Add Analog Channel options.
1. From the CHANNELS menu,
highlight Add Analog Channel
and press OK. The ADD ANALOG
CHANNEL menu is displayed.
To add a range of new channels:
2. Highlight Enter Channel and use
the Number Pad on the remote
to enter the number of the
channel you are adding.
1. From the CHANNELS menu, highlight Partial Channel Search,
and press OK. The PARTIAL CHANNEL SEARCH menu is
displayed.
2. Highlight Scan Mode and select the type of channel you are
adding: Analog, Digital, or Analog/Digital.
3. Highlight Add Channel and
press OK. The TV scans for the
channel.
3. Highlight From Channel and enter the channel where you want
to begin the scan. (Use the Left Arrow button to backspace.
Use the Number Pad on the remote to enter the channel.)
4. When the TV is done scanning
for the channel, press the EXIT
button on the remote.
4. Highlight To Channel and enter the channel where you want
to end the scan. (Use the Left Arrow button to backspace. Use
the Number Pad on the remote to enter the channel.)
5. Highlight Start and press OK. The partial channel search
begins.
6. Wait until the partial channel search is 100% complete.
Highlight Done and press OK.
7. Press the EXIT button on the remote.
44
VIZIO
ADD ANALOG CHANNEL
Enter Channel
Add Channel
4
Skipping Channels
After a channel scan is completed, you may find that some channels
are too weak to watch comfortably. There may also be some
channels you do not want to view. You can remove these channels
from the TV’s memory with the Skip Channel feature.
Channels that have been removed with the Skip Channel
feature can still be viewed if the channel is entered
using the Number Pad. If you wish to completely block
a channel from being viewed, use the parental controls.
See Locking and Unlocking Channels on page 52.
To remove a channel:
1. From the CHANNELS menu,
highlight Skip Channel, and
press OK. The SKIP CHANNEL
menu is displayed.
2. For each channel you wish
to remove, use the Up/Down
Arrow buttons on the remote to
highlight the channel and press
OK. A P appears to the right of
each channel you select.
VIZIO
SKIP CHANNEL
1
Test 0
1
Test 1
P
1-2
Test 2
P
2
Test 3
2-2
Test 4
2-3
Test 5
P
Wide
Zoom
Normal
Exit
2D
3D
ABC
3. When you have selected all
of the channels you wish to
remove, press the EXIT button
on the remote.
45
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
Panoramic
4
Changing the Audio Language
To use the Digital Language feature:
Some free-to-air, cable, and satellite channels broadcast programs
in more than one language. The Analog Audio and Digital Language
features allow you to listen to audio from Secondary Audio
Programming (SAP). SAP allows you to listen to broadcasts in
multiple languages.
•
Analog Audio works with analog channels.
•
Digital Language works with digital channels.
1. From the CHANNELS menu,
highlight Digital Language
and press OK. The DIGITAL
LANGUAGE menu is displayed.
2. Select your preferred language:
English, Español, or Français.
Press OK.
Not all programs are broadcast in multiple languages.
The Analog Audio and Digital Language features
only work when the program being viewed is being
broadcast in the language you select.
3. Press the EXIT button on the
remote.
To use the Analog Audio feature:
1. From the CHANNELS menu,
highlight Analog Audio and
press OK. The ANALOG AUDIO
menu is displayed.
2. Select Stereo, SAP (Secondary
Audio Programming), or Mono.
Press OK.
VIZIO
ANALOG AUDIO
Stereo
Wide
Zoom
Normal
Exit
2D
3D
SAP
Mono
3. Press the EXIT button on the
remote.
ABC
46
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
Panoramic
VIZIO
DIGITAL LANGUAGE
English
Español
Français
4
SETTING UP CLOSED CAPTIONING
Changing the Appearance of Digital Closed Captions
Digital closed captions can be displayed according to your
preference. See the diagram on the next page for an explanation of
the parts of the closed caption area.
Your TV can display closed captions for programs that include them.
Closed captions display a transcription of a program’s dialogue.
To change the appearance of digital closed captions:
If the program you are viewing is not being broadcast
with closed captions, the TV will not display them.
1. From the CLOSED CAPTIONS
menu, use the Arrow buttons to
highlight Digital Caption Style
and press OK.
The Closed Captioning menu only appears when the input is an
antenna for Over-the-Air signals, cable TV directly from the wall (no
cable box), or a device with a composite video connection.
2. Use the Left/Right Arrow
buttons on the remote to select
Digital Style > Custom. The
DIGITAL STYLE menu appears as
shown.
To activate or deactivate closed
captions:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Closed
Captions and press OK. The
CLOSED CAPTIONS menu is
displayed.
VIZIO
3. Use the Up/Down Arrow
buttons
remote
to
Wide
Zoomon the
Normal
Panoramic
highlight the setting you wish to
change, then use the Left/Right
Arrow buttons to change the
setting:
Exit
2D
3D
CLOSED CAPTIONS
Closed Captions
Off
Analog Closed Captions
Digital Closed Captions
Digital Style
CC1
CS1
As Broadcast
•
3. Use the Arrow buttons on the
remote to highlight the type of
closed captions you wish to see:
Input
•
Closed Captions turns this
option On or Off.
• Analog Closed Captions for
analog (NTSC) TV channels.
• Digital Closed Captions for
digital (ATSC) TV channels.
VIZIO
DIGITAL STYLE
Custom
Caption Style
Text Style
As Broadcast
Large
Text Size
Text Color
As Broadcast
Text Opacity
As Broadcast
Color
Text Edges
Text Edges Color
As Broadcast
Black
Background Color
Background Opacity
As Broadcast
Window Color
As Broadcast
Window Opacity
As Broadcast
Caption Style - Choose
As Broadcast
ABC to keep
default settings or Custom
to manually
change each
Wide
CC
setting.
•
Text Style - Changes the
font used for the closed
Sleep captioning text.
Picture
Audio
Timer
4. After highlighting the type of
closed captions you wish to
see, use the Left/Right Arrow
buttons on the remote to select
the caption channel you wish to
display, then press EXIT.
•
Text Size - Makes the text larger or smaller.
•
Text Color - Changes the color of the text.
•
Text
Opacity
- Changes the transparency of the text.
Settings
Help
•
Text Edges - Change the effects at the edges of the text,
such as raising the edges or adding drop shadows.
•
Text Edges Color - Change the color at the edges of the text.
Network
47
4
•
Background Color - Change the color of the background
directly behind the text.
•
Background Opacity - Change the transparency of the
background directly behind the text.
•
Window Color - Change the color of the closed captioning
box.
•
Window Opacity - Change the opacity of the closed
captioning box.
Typical choices include:
•
Opaque background, transparent window—Only a strip of
background appears behind the text, expanding as the text
appears. This is the typical "As Broadcast" mode.
•
Opaque background and window in the same color—When
text appears, the entire line fills with color at once.
In the example below, the closed caption text is green, the
background is black, and the window is red.
4. When you are satisfied with the appearance of the closed
captions, press the EXIT button on the remote.
Text
Background
CLOSED CAPTION TEXT SAMPLE
Window
CLOSED CAPTIONS SCREEN
48
4
RENAMING INPUTS (USING THE DEVICES MENU)
Inputs can be renamed to make them easier to recognize on the
Input menu (see Changing the Input Source on page 26). For
example, if you have a DVD player connected to the Component
input, you can rename that input to display “DVD Player.”
Input Port
To change the name of an input:
VIZIO
1. Press the MENU button on the remote. The on-screen menu is
displayed.
NAME INPUT
HDMI-1
2. Use the Arrow buttons on the remote to highlight Devices and
press OK. The DEVICES menu is displayed.
Wide
Zoom
Input
Name
DVD
Custom Name
DVD_
Exit
3. Highlight the input device that you want to rename and press
OK.
a b
j k
s t
1 2
[email protected]#
4. To use a preset input name:
a. Highlight the Input Port row and press OK.
Normal
c
l
u
3
d
m
v
4
äêí
e
n
w
5
f g
o p
x y
6 7
Space
h
q
z
8
i
r
0
9
2D
3D
ABC
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
OK
b. Highlight the input name you want to use and press OK.
—or—
Cancel
To enter a custom name:
Select the input name from a list
of common device names (Blu-ray,
Cable Box, DVD, etc).
a. Enter your custom name using the on-screen keyboard.
b. Highlight OK and press OK.
c. The Input Name changes to show the custom name that
you created.
5. When you have finished naming your input, press the EXIT
button on the remote.
49
Panora
4
CHANGING THE TV SETTINGS
Viewing System Information
To view technical data and status information about your TV and
network connection:
Using the system menu, you can:
•
View technical system and
networking information
•
Change the on-screen menu
language
System Information
•
Set the time zone and local
setting
Time & Local Settings
•
Set up parental controls
View Mode
•
Open the WIDE menu
Wide
•
Give the TV a name for it to
work with DLNA-enabled
devices
•
Set up CEC devices to control
them with your VIZIO TV
remote
•
Control when the power
indicator light is on
•
Reset TV settings and control
Smart Interactivity
1. Press the MENU button on the remote. The on-screen menu is
displayed.
VIZIO
SYSTEM
Menu Language
Wide
English
Exit
Overlay
Panoramic
2D
3D
4. Use the Up/Down Arrow buttons to scroll through the system
information.
VIZIOTV
ABC
5. When you are finished reviewing the system information, press
the EXIT
button
Input
Wide
CCon the remote.
CEC
Power Indicator
Normal
3. Highlight System Information and press OK.
Parental Controls
TV Name
Zoom
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
Off
Reset & Admin
50
Sleep
Timer
Picture
Audio
Network
Settings
Help
4
Changing the On-Screen Menu Language
Setting the Time Zone
Your TV can display the on-screen menu in different languages.
To ensure the correct time is displayed when you press the GUIDE
button, set the TV’s time zone:
To change the on-screen menu language:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
VIZIO
MENU LANGUAGE
ZoomArrow
Normal
Panoramic
2.Wide
Use the
buttons
on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
English
Español
Français
2D
3. Exit
Use the
Arrow3Dbuttons on the
remote to highlight Time & Local
Settings and press
OK. The TIME
ABC
& LOCAL SETTINGS menu is
displayed.
Input
Wide
CC
3. Use the Arrow buttons on
the remote to highlight Menu
Language and press OK. The
MENU LANGUAGE menu is
displayed.
4. Highlight Time Zone and press
OK. The TIME ZONE menu is
displayed.
4. Highlight your preferred
language (English, Español, or
Français) and press OK.
Sleep
Picture
VIZIO
TIME ZONE
Hawaii (-10)
Alaska (-9)
Pacific (-8)
Mountain (-7)
Arizona (-7)
Central (-6)
Indiana (-5)
Eastern (-5)
Atlantic (-4)
Newfoundland (-3.5)
Audio
5. Timer
Highlight your time zone and
press OK.
5. Press the EXIT button on the
remote.
6. Highlight Daylight Saving Time
and press
The DAYLIGHT
Network
SettingsOK.Help
SAVING TIME menu is displayed.
Choose On if your locale
observes daylight saving time,
Off if it does not, or Auto to
have your TV detect daylight
saving automatically.
7. If you are in the United States, highlight ZIP Code. Enter your
ZIP code using the keypad on the remote, then press OK. ZIP
codes are often used by V.I.A. Plus Apps to give you the most
accurate location-based information, such as weather or news.
8. Highlight Country and press OK. Highlight our country and
press OK.
9. Press the EXIT button on the remote.
51
4
Using the Parental Controls
Enabling or Disabling Program Ratings
The TV’s parental controls allow you to prevent the TV from
displaying certain channels or programs without a password.
To manage program content according to its rating, you must
enable the Program Rating feature.
The Parental Controls menu only appears when:
To enable or disable the Program Rating feature:
•
You are using an the tuner receive your TV signals, such as
when you are using an antenna for Over-the-Air signals or
when connected to cable TV directly from the wall (no cable
box).
•
You have a device connected using a composite video cable
or a coaxial cable, such as a VCR, satellite or cable box, or
DVR.
1. From the PARENTAL CONTROLS menu, highlight Locks and
press OK. Type the parental passcode. The LOCKS menu is
displayed.
2. Select On or Off and press OK.
Locking and Unlocking Channels
When a channel is locked, it will be inaccessible. Locking a channel
is a good way to prevent children from viewing inappropriate
material.
Other devices have their own parental control settings.
Accessing the Parental Controls Menu
To lock or unlock a channel:
To access the Parental Controls menu:
1. From the PARENTAL CONTROLS menu, highlight Channel Locks
and press OK. The CHANNEL LOCKS menu is displayed.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Highlight the channel you want to lock or unlock and press OK.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. When a channel is locked, the Lock icon appears locked. The
channel is not accessible unless the parental passcode is
entered.
3. Use the Arrow buttons on the remote to highlight Parental
Controls and press OK.
4. When a channel is unlocked, the Lock icon appears unlocked.
The channel is accessible.
4. Enter your parental passcode. If you have not set a passcode,
enter the default, 0000. The PARENTAL CONTROLS menu is
displayed.
To set a custom parental passcode, see Changing the
Parental Control Passcode on page 53.
52
4
Changing the Parental Control Passcode
Blocking and Unblocking Content by Rating
A channel may sometimes broadcast programs that are meant for
children, and at other times broadcast programs that are meant
for mature audiences. You may not want to block the channel
completely using a channel lock, but you may wish to block certain
programs from being viewed.
If you use the parental controls, you should change the passcode to
prevent children from accessing inappropriate material.
To change the parental control passcode:
1. From the PARENTAL CONTROLS menu, highlight Change PIN
and press OK. The CHANGE PIN menu is displayed.
When this is the case, you can use the TV’s Rating Block feature to
block content based on its rating.
2. In the New PIN field, use the Number Pad on the remote to
enter your new 4-digit parental control passcode.
For a list of content ratings and their definitions, visit
www.tvguidelines.org.
3. In the Confirm PIN field, use the Number Pad on the remote
to re-enter your new 4-digit parental control passcode.
To block or unblock content by its rating:
4. Write down your new parental control passcode and save it in
a secure location.
1. From the PARENTAL CONTROLS menu, highlight the content
type you want to adjust and press OK:
USA - TV - USA television program broadcasts.
USA - Movie - USA movie broadcasts.
Canadian - English - Canadian English television program
broadcasts.
Canadian - French - Canadian French television program
broadcasts.
5. Press the EXIT button on the remote.
Resetting the Content Locks
To reset the content locks to the factory-default settings:
1. From the PARENTAL CONTROLS menu, highlight RESET LOCKS
and press OK. The TV displays, “Select Reset to restore Parental
Controls to factory defaults."
2. For each rating type you want to block or unblock, use the Up/
Down and Left/Right Arrow buttons on the remote to highlight
the rating type and press OK.
2. Highlight Yes and press OK.
3. When the rating type is blocked, the Lock icon appears locked.
Content with this rating and all higher ratings cannot be
viewed.
4. When the rating type is unblocked, the Lock icon appears
unlocked. Content with this rating and all lower ratings can be
viewed.
If you want to block all unrated content, highlight Block
Unrated Shows and use the Arrow buttons on the remote to
select On.
5. When you are finished adjusting the rating level blocks, press
the EXIT button on the remote.
53
4
Changing the View Mode Settings
Adjusting the Wide Mode (Aspect Ratio)
You can resize the video content to fit while the menu is open.
The TV can display images in five different modes: Normal, Stretch,
Panoramic, Wide, and Zoom. Each mode displays the picture
differently.
To change the on-screen menu language:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
To change the screen aspect ratio:
VIZIO
VIEW MODE
1.Wide
PressZoom
the WIDE
button
on the
Normal
Panoramic
remote.
Viewport
Overlay
2. Use the Arrow buttons to
highlight the aspect ratio you
Exit
3D
wish to2Dview and
press OK.
Centered Overlay
•
3. Use the Arrow buttons on the
remote to highlight View Mode
and press OK. The VIEW MODE
menu is displayed.
Input
4. Highlight your Viewport,
Overlay, or Centered Overlay
and press OK.
•
Viewport - The entire picture
is visible in the space to the
right of the menu.
•
Overlay - The left-hand
portion of the picture
covered by the menu.
•
Centered Overlay - The picture extends off of the right side
of the screen.
Normal preserves the content’s
ABC
original aspect
ratio. Since the 4:3
aspect ratio is not large enough
Wide
CC screen, black bars
to fill
the TV’s
are added to the left and right of
the display image.
Normal
Normal
Panoramic
Stretch
Wide
Wide
Zoom
Zoom
Note: Aspect ratio settings may
vary by Input source.
•
Stretch expands the display image to fill the screen. Images
Picture
Audio
may
appear
wider than intended. If you are watching
widescreen (1.85:1 or 2.35:1) content, black bars will still
appear on the top and bottom of the display image. This
option is only available when the TV is displaying a
Network720p/1080i
Settings
Help
source.
Sleep
Timer
5. Press the EXIT button on the remote. See Viewing Video with
the Menu Open on page 28 for an alternate way of resizing
the video content.
54
•
Panoramic expands the display image to fill the width of
the screen. Images may appear wider than intended. If
you are watching widescreen (1.85:1 or 2.35:1) content,
black bars will still appear on the top and bottom of the
display image. This option is only available when the TV is
displaying a 480i/480p source.
•
Wide stretches a 4:3 aspect ratio picture to the edges of
the screen. Since the picture is being stretched, the display
image may appear distorted. If the program is already
formatted for widescreen viewing (1.85:1 or 2.35:1), then
black bars will appear on the top and bottom of the display
image.
•
Zoom expands images with black bars to fit the screen.
4
Changing Your TV's DLNA Name
Controlling Other Devices with CEC
DLNA allows your TV to display content from DLNA-certified
computers, cameras, tablets, and smartphones.
The CEC function on your TV enables you to control devices
connected to the HDMI (ARC) input with the included remote,
without any programming. Using CEC, your VIZIO TV remote can
control:
To create a custom DLNA name for your TV:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
3. Use the Arrow buttons on the
remote to highlight TV Name
and press OK. The TV NAME
menu is displayed.
VIZIO
TV NAME
•
Power on/off
•
Volume
•
Zoom
Mute
Wide
Normal
Panoramic
VIZIOTV_
a b
j k
s t
1 2
[email protected]#
c d
l m
u v
3 4
.com
e
n
w
5
f g
o p
x y
6 7
Space
h
q
z
8
Not all HDMI devices support CEC. See your device’s
user manual for details.
i
r
0
9
Exit
2D
3D
To enable, disable, or adjust CEC settings:
ABC
1. Press the MENU button on the remote. The on-screen menu is
displayed.
Input
Wide
CC
OK
Cancel
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
4. Use either the onscreen
keyboard or keyboard on your
remote control to enter a name
for your TV (the name can be up
to 10 characters long).
Sleep
Picture
Audio
3. Timer
Use the
Arrow
buttons on the remote to highlight CEC and
press OK. The CEC Settings menu is displayed.
4. Highlight CEC and press OK. Select a setting and then press OK.
When you are finished, highlight
OK and press the OK button.
•
Settings- All
Help
Enable
CEC-compatible devices connected to HDMI
inputs can be discovered.
•
ARC only - VIZIO sound bars and other CEC-compatible
audio systems connected to the HDMI (ARC) input are
automatically discovered, controlled by the remote, and
have audio played through them.
•
Disable - Devices are not discovered and the remote does
not control CEC devices.
Network
5. Press the EXIT button on the
remote.
55
4
Turning the Power Indicator On or Off
To begin device discovery:
•
From the CEC menu, highlight Device Discovery and press
OK.
The Power Indicator on the front of your TV normally does not glow
when the TV is on. You can change this setting if you prefer the light
to be on.
Your TV begins looking for CEC devices connected to all of its
HDMI inputs. When discovery is complete:
•
To turn the Power Indicator Light on or off:
The CEC-compatible devices are listed below Device
Discovery.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
• The names of these devices now appear on the Input
menu.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
• If an audio device was discovered, the TV's speakers are
turned off.
3. Highlight Power Indicator and press OK.
• The VIZIO TV remote controls an attached VIZIO sound
bar or other audio system.
4. Use the Up/Down Arrow buttons to select On or Off, then
press OK.
56
4
Restoring the TV to Factory Default Settings
Enabling and Disabling Smart Interactivity
You can use the TV’s Reset & Admin menu to restore the TV to its
factory default settings.
Your TV can display program-related information as part of a
broadcast. To enable or disable Smart Interactivity:
All of the on-screen menu settings can be reset to the factory
defaults.
1. Press the MENU button. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
If you restore the TV to the factory default settings, all
changes you have made to the settings will be lost!
3. Highlight Reset & Admin and press OK. The RESET & ADMIN
menu is displayed.
To restore the TV to its factory default settings:
4. Highlight Smart Interactivity and press OK.
1. Press the MENU button. The on-screen menu is displayed.
5. Select On or Off and press OK.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
6. Press the EXIT button on the remote.
3. Highlight Reset & Admin and press OK. The RESET & ADMIN
menu is displayed.
4. Highlight Reset TV to Factory Defaults and press OK.
5. Enter your parental control passcode. If you have not yet set
up a parental passcode, enter the default, 0000.
The TV displays, "Select Reset to restore all TV settings to
factory defaults and clear all account information."
6. Highlight Reset and press OK.
7. Wait for the TV to turn off. The TV will turn back on shortly
afterward and the Setup App will begin.
57
4
USING THE GUIDED SETUP MENU
The TV’s Setup App can be used to easily set up channels on the TV
or to connect the TV to your network.
To use guided setup:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Highlight Guided Setup and
press OK. The GUIDED SETUP
menu is displayed.
VIZIO
GUIDED SETUP
Channel Setup
Channel Setup - Set up the
TV tuner.
•
Network Setup - Connect the
TV to the Internet using your
network.
Zoom
Normal
Exit
2D
3D
Network Setup
3. Highlight the guided setup you
want to use and press OK:
•
Wide
ABC
4. Follow the on-screen
instructions. When finished,
press the EXIT button on the
remote.
58
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
Panoramic
4
USING THE INFO WINDOW
The Info Window can be displayed by pressing the GUIDE or INFO
buttons on the remote:
•
Press the GUIDE or INFO button once to display channel,
input, and display information.
•
Press the GUIDE or INFO button twice to display the
program title, program rating, audio information, and the
start and end times of the program.
Channel/Input Information
28-1
KCET-HD
Oliver’s Holiday Surprise
1080p TV-PG (V)
6:15pm
Normal
Dolby Digital Stereo
11:00AM - 12:00PM
Oliver wakes up one morning only to discover that his pals are missing. In this hour-long
holiday special, Oliver goes on a journey in search of his pals. Who knows what he’ll encounter on the way?
Program Description
Program Title
DIGITAL EPISODE GUIDE WINDOW
59
5
Using the USB Media Player
USING THE USB MEDIA PLAYER
Displaying USB Media
To display your USB media:
The USB media player allows you to connect a USB thumb drive to
your TV and view photos.
1. Connect your USB thumb drive to the USB port on the side of
the TV.
2. Use the Arrow buttons to highlight Yes and press the OK.
If the dialog box disappears, press the V button on the
remote to go the next step.
3. Use the Arrow buttons to highlight your USB device in the list
and press OK.
4. Use the Arrow buttons to highlight Photo and press OK.
5. Use the Arrow buttons to highlight the photo you want to
display. Press OK. The photo displays.
You can display your photos in fullscreen. Select the
photo, press OK, then highlight Fullscreen and press
OK.
USB PORT
Removing the USB drive from the TV
Preparing your USB drive to display USB Media
Do not remove the USB thumb drive while the TV is on.
Doing so may damage the drive.
To display USB media, you must first save your photos onto a USB
thumb drive:
•
The USB thumb drive must be formatted as FAT32.
To safely remove your USB drive from the TV:
•
Files on the USB thumb drive must end in a supported file
extension (.jpg or .jpeg.).
1. Turn off the TV.
•
The USB media player is not designed to play media
from external hard drives, MP3 players, cameras, or
smartphones.
2. Disconnect your USB thumb drive from the USB port on the
side of the TV.
60
5
Connected
Sources
Displays
connected USB
devices. To
change source,
highlight it and
press OK.
Back Button
Highlight this button and
press OK to return to the
previous screen.
VIZIO
USB1:
Current Folder
root
Start Fullscreen
Slideshow
Sort by Name or Date
View Thumbnails or
Folders
Adjust Slideshow
Settings
Photo
Folder Contents
This area displays the contents of
the currently selected folder. You
can browse files and folders using
the Arrow and OK buttons on the
remote.
Back Button
Highlight and press OK to return to left column.
Current Folder
Displays the folder path.
VIZIO_2GB\Photo\root
A.jpg
B.jpg
C.jpg
D.jpg
E.jpg
F.jpg
H.jpg
I.jpg
Start Slideshow
Sort:
Name A-Z
View:
Folders
Settings
Browse Music
File Name: D 1920x1080
Resolution: 1920x1080
Size:
1607270KB
G.jpg
Page 1 of 1
Photo
Information
Displays name,
resolution, and file
size for currently
selected photo.
Page Information
If your USB thumb drive has more
files than can be displayed on a
single screen, the page information is
displayed here.
PHOTO VIEWER
61
5
Back Button
Highlight this button and
press OK to return to the
previous screen.
Connected
Sources
Displays
connected USB
devices.
VIZIO
Music
Progress Bar
Displays the duration of the currently-playing song. The blue bar will
lengthen as the song progresses.
Album Art
If included on the USB
thumb drive and associated
with your music, the album
art will display here.
Fab Apple Dream
By Oliver
On January Mix Comp
USB1: MyFlashDrive
5:50
8:46
MyFlashDrive\Audio\root\My Music
Current Folder
My Music
Playback Controls
Use to control audio
playback. Highlight Play/
Pause, Previous, or Next
and press OK.
Toggle Music/Photos
Sort by Album/Artist/
Track
Now Playing Information
Displays song title, album title, and artist name.
#
TRACK
ARTIST
DURATION
1
Seminal Summer
January Mix Comp
ALBUM
JCheesy
2:42
2
Downspin
January Mix Comp
JCheesy
6:20
3
Fab Apple Dream
January Mix Comp
Oliver
8:46
4
Man of the Year
January Mix Comp
The Dash
4:21
5
Maximal Smooth
January Mix Comp
Rio Steve
7:58
Browse Photos
Sort:
ALUMB A-Z
View:
Folders
Page 1 of 1
View All or View
Folders
Page Information
Folder Contents/
Playlist
This area displays
the contents of the
currently selected
folder. You can
browse files and
folders using the
Arrow and OK buttons
on the remote.
If your USB thumb drive has more
files than can be displayed on a
single screen, the page information is
displayed here.
MUSIC PLAYER
62
5
Back Button
Highlight this button and
press OK if you would
like to return to the
previous screen.
Connected
Sources
Displays
connected USB
devices.
VIZIO
Video
USB1: MyFlashDrive
MyFlashDrive\Video\root\My Videos
Current Folder
My Videos
Sort by Date
Sort:
Date New-Old
View:
Folders
#
FILE
DATE
DURATION
1
Family Vacation - California
-
00:23:43
2
26th Birthday Party
-
00:38:18
3
Summer 2012
-
00:41:08
4
Greatest Trip Ever
-
00:05:32
Page 1 of 1
View All or
View Folders
Page Information
Folder Contents/
Playlist
This area displays
the contents of the
currently selected
folder. You can
browse files and
folders using the
Arrow and OK buttons
on the remote.
If your USB thumb drive has more
files than can be displayed on a
single screen, the page information is
displayed here.
VIDEO PLAYER
63
Using VIZIO Internet Apps Plus® (V.I.A. Plus)
Vizio Internet Apps Plus (V.I.A. Plus) delivers popular online content
to your TV. V.I.A. Plus features a selection of Apps that allow you to
watch movies and TV shows, listen to music, get weather and news
information, and more–all on demand.
6
Using the App Launcher Keys
Use the App Launcher keys on the remote to launch the apps
pictured on the buttons. Pressing a App Launcher key will also turn
the TV on (if it is off).
The specific apps on the App Launcher
keys vary from model to model.
A high-speed Internet connection is required to receive
product updates and to access online content.
See Using the Network Connection Menu on page 36 if your TV is
not yet connected to your home network.
App Launcher Keys
USING THE V.I.A. PLUS APP DOCK
The V.I.A. Plus App Dock is where all of your V.I.A. Plus Apps are
accessed.
To launch an App from the Dock:
1. Press the V Button on the remote.
2. Highlight an App by scrolling left
and right using the Left/Right
Arrow buttons on the remote.
(The highlighted App is in the
center of the dock.)
3. Press the OK button on the
remote to launch the App.
V Button
V.I.A. Plus App Dock
64
6
USING THE FULLSCREEN V.I.A. PLUS APPS WINDOW
The Fullscreen V.I.A. Plus Apps Window allows you to add and store
Apps. The Apps on the first page are displayed in the Dock and
Apps on additional pages can be moved to the Dock.
To open the Fullscreen V.I.A. Plus Apps Window:
3. Press the OK button on the remote to launch the App.
4. To exit from an open App or to close the App Dock, press the
Exit button on the remote.
1. Press the V Button on the remote twice.
2. Highlight an App by using the Arrow buttons on the remote.
My Apps
Features the Apps
installed on your TV.
App Tabs
Browse through Apps
on these tabs and
add them to your
My Apps tab.
Installed Apps
The Apps displayed
here are also
available in the
V.I.A. Plus App Dock.
Note: App location, appearance, and availability subject to change without notice.
65
6
FULLSCREEN V.I.A. PLUS APPS WINDOW OVERVIEW
The Fullscreen V.I.A. Plus Apps Window allows you to add, delete,
and organize your Apps. The My Apps tab displays Apps that are
already installed on your TV. The Apps on the first page are displayed
in the V.I.A. Plus App Dock.
Apps with a small lock icon in the right-hand corner
cannot be deleted.
•
All Apps: Displays every App that is available for download.
•
Categories: Displays Apps sorted into categories: Spotlight,
Yahoo!, Weather, News and Finance, Movies and TV, Photos
and Video, Sports, Music, Social, Information, Fun and
Games, Shopping, and Local TV.
•
App Info ( ): Displays App software information and
development settings.
The following tabs are located at the top of your Fullscreen V.I.A.
Plus Apps Window:
•
My Apps: Displays Apps that are installed on your TV.
•
Featured: Displays Apps that are recommended by Yahoo!
•
Latest: Displays Apps that were most recently added to the
library of Apps.
You can preview Apps without installing them. Simply
highlight the App you wish to preview and press OK to
open it.
Note: App location, appearance, and availability subject to change without notice.
66
6
CUSTOMIZING THE V.I.A. PLUS APPS WINDOW
Deleting an App from the My Apps Tab
You can add, delete, and move Apps around on your My Apps tab
for a custom look and feel.
Adding an App to the My Apps Tab
To delete an App from your TV:
1. Use the Arrow buttons on the remote to highlight the App you
wish to delete.
2. Press and hold the OK button. The following options appear:
To add an App to your TV:
1. Use the Arrow buttons on the remote to highlight the App you
wish to add.
Note: App location, appearance, and availability subject to change without notice.
2. Press and hold the OK button until [App Name] has been
added to your My Apps list appears.
Once the App has been installed, a star appears in the top right-hand
corner of the App icon as shown below.
Star
3. Press OK to delete the App. The following dialog box appears:
4. Use the Left/Right Arrow buttons to select Delete and press
OK.
Note: App location, appearance, and availability subject to change without notice.
The App is removed from your My Apps tab.
67
6
Moving an App in My Apps
You can organize your Apps on your My Apps tab by moving them
where you want.
To move the Apps on your My Apps tab:
3. Use the Arrow buttons to move the App to the desired location
and press OK to place the App. When you can move the App, it
appears as shown below.
Note: App location, appearance, and availability subject to change without notice.
1. Use the Arrow buttons on the remote to highlight the App you
wish to move.
2. Press and hold the OK button. The following options appear:
Note: App location, appearance, and availability subject to change without notice.
Only the Apps on the first page appear in the Dock.
68
Troubleshooting & Technical Support
Do you have questions? Find answers at
SUPPORT.VIZIO.COM
Find help with:
• New product setup
• Connecting your devices
• Technical problems
• Product updates and more
Live chat
support available
You can also contact our
award-winning support team at:
Phone:
(877) 698-4946 (toll-free)
Hours of Operation: Monday - Friday: 7 am to 11 pm (PST)
Saturday - Sunday: 9 am to 6 pm (PST)
Se habla Español • Nous parlons Français
69
A
A
There is no sound.
• Press Volume Up on the remote control.
The TV displays “No Signal.”
• Press the INPUT button on the remote control to select a
different input source.
•
If you are using cable TV, satellite, or an antenna
connected directly to the TV, scan for channels. See
Finding Channels on page 43.
There is no power.
• Ensure the TV is plugged into a working electrical outlet.
•
Press the MUTE button on the remote to ensure mute is
off.
•
Check the audio settings. See Adjusting the Audio Settings
on page 37. Ensure that the speakers are set to On.
•
Ensure no headphones are connected to the TV.
•
Check the audio connections of external devices (Blu-ray
player, game console, cable/satellite box) that are
connected to the TV.
• Ensure the power cable is securely attached to the TV.
• Press the Power/Standby button on the remote or on the
side of the TV to turn the TV on.
•
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The colors on the TV don’t look right.
• Adjust the Color and Tint settings in the Picture menu. See
Adjusting the Picture Settings on page 29.
The power is on, but there is no image on the screen.
• Ensure all cables are securely attached to the TV.
•
Ensure all devices are connected correctly. Devices differ;
see your device’s user manual for details.
•
Adjust Brightness, Contrast, or Backlight. See Adjusting
the Picture Settings on page 29.
• Press the INPUT button on the remote to select a different
input source.
•
Select a pre-set picture mode. See Adjusting the Picture
Settings on page 29. VIZIO recommends selecting the
Calibrated mode.
•
Check all cables to ensure they are securely attached.
The buttons on the remote aren’t working.
• Ensure you are only pressing one button at a time.
70
•
Point the remote directly at the TV when pressing a
button.
•
Replace the remote batteries with new ones. See
Replacing the Batteries on page 16.
A
I see “noise” or static on the screen.
• When your TV’s digital capabilities exceed a digital
broadcast signal, the signal is up-converted (improved) to
match your TV’s display capabilities. This up-converting
can sometimes cause irregularities in the image.
The image quality is not good.
• For the best image quality, view high-definition programs
using digital sources. Connect your devices with HDMI
cables.
•
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
•
The picture is distorted.
• Nearby electrical devices may be interfering with the
TV. Separate the TV from electrical appliances, cars, or
fluorescent lights.
•
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
When I change input source, the volume changes.
• The TV remembers the volume level on each input source.
If the volume level on the new input source is higher or
lower than the level on the source you switch from, the
difference may be noticeable.
Ensure all cables are securely attached.
•
The display image does not cover the entire screen.
• If you are using TV, AV, or Component with 480i input,
press the WIDE button on the remote to change the
screen mode.
Use the Volume Up/Down buttons on the remote to
adjust the volume.
When I change input source, the display image changes size.
• The TV remembers the viewing mode on each input
source. If the viewing mode on the new input source
differs from the one on the input source you switch from,
the difference may be noticeable.
The TV has pixels (dots) that are always dark.
• Your HDTV is precision-manufactured using an extremely
high level of technology. However, sometimes pixels may
not display correctly. These types of occurrences are
inherent to this type of product and do not constitute a
defective product.
•
71
See Changing the Screen Aspect Ratio on page 27..
B
Specifications
D32-D1
D32h-D1
D32x-D1
32" Class
32" Class
32" Class
31.50"
31.50"
31.50"
28.60" x 19.03" x 7.87"
28.60" x 17.06" x 2.55"
28.76” x 19.11” x 7.87”
28.76” x 17.14” x 2.55”
28.60” x 19.03” x 7.87”
28.60” x 17.06” x 2.55”
11.79 lbs
11.31 lbs
11.29 lbs
11.02 lbs
11.79 lbs
11.31 lbs
Direct LED
Direct LED
Direct LED
Refresh Rate:
120 Hz
60 Hz
60 Hz
Clear Action:
240
N/A
N/A
1920 x 1080 (1080p)
1366 x 768 (720p)
1920 x 1080 (1080p)
200,000:1
200,000:1
200,000:1
0.364 mm (H) X 0.364 mm (V)
0.511 mm (H) X 0.511 mm (V)
0.364 mm (H) X 0.364 mm (V)
178° (H) / 178° (V)
178° (H) / 178° (V)
178° (H) / 178° (V)
HDMI Inputs:
2
2
2
Component Video
Inputs:
1
1
1
Composite Inputs:
1 (Shared with Component)
1 (Shared with Component)
1 (Shared with Component)
RF Antenna Input:
1
1
1
USB 2.0 Ports:
1
1
1
Ethernet:
1
1
1
802.11n
802.11n
802.11n
Audio Outputs:
Optical Digital, RCA Analog Stereo
Optical Digital, RCA Analog Stereo
Optical Digital, RCA Analog Stereo
OSD Language:
English, Spanish, French
English, Spanish, French
English, Spanish, French
XRT122
XRT122
XRT122
Screen Size:
Viewable Area:
Dimensions w/ Stand:
w/o Stand:
Weight w/ Stand:
w/o Stand:
TV Type:
Maximum Resolution:
Dynamic Contrast Ratio:
Pixel Pitch:
Viewing Angle:
Built-In Wi-Fi:
Remote Control Model:
72
B
D32-D1
D32h-D1
D32x-D1
UL, cUL, NOM, FCC Class B, BETS-7/ UL, cUL, NOM, FCC Class B, BETS-7/ UL, cUL, NOM, FCC Class B, BETS-7/
Certifications: ICES-003 Class B, IC, IFETEL, HDMI
ICES-003 Class B, IC, IFETEL, HDMI
ICES-003 Class B, IC, IFETEL, HDMI
(CEC, ARC), Dolby Digital PLUS
(CEC, ARC), Dolby Digital PLUS
(CEC, ARC), Dolby Digital PLUS
Energy Star 7.0, NRCan,
CONUEE, NOM-032
Energy Star 7.0, NRCan,
CONUEE, NOM-032
Energy Star 7.0, NRCan,
CONUEE, NOM-032
120V @ 60 Hz
120V @ 60 Hz
120V @ 60 Hz
Power Consumption:
25.5 W
26.1 W
28 W
Standby Power:
< 0.5 W
< 0.5 W
< 0.5 W
Zero Bright Pixel
Guarantee:
Yes
Yes
Yes
Compliance:
Voltage Range:
73
C
Limited Warranty
FOR UNITED STATES AND CANADA ONLY
BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY.
BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT
AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY
(30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER
WHERE YOU PURCHASED IT.
This warranty contains a binding arbitration agreement and a class action waiver for United States
residents. If you live in the United States, the binding arbitration agreement and class action
waiver affect your rights under this warranty. Please read the text under the section titled “Binding
Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” carefully.
replace it, or refund the purchase price to you. There will be no charge for parts or labor during the
warranty period. Replacement parts may be new or recertified at VIZIO’s option and sole discretion.
Replacement parts and VIZIO’s labor are warranted for the remaining portion of the original warranty
or for ninety (90) days from warranty service, whichever is longer.
Types of Service
TVs that are 32 inches or larger will usually be serviced in-home. In-home service requires complete
and easy access to the product and does not include de-installation or re-installation of the product.
In-home service is subject to availability. VIZIO will provide other service options when in-home
service is not available.
All other VIZIO products must be sent to a VIZIO service center to obtain warranty service. VIZIO is
not responsible for transportation costs to the service center, but VIZIO will cover return shipping to
the customer.
How Long This Warranty Lasts
For non-commercial use, VIZIO warrants the product on the terms set forth below for one (1) year
from the date of original purchase. For commercial use, VIZIO warrants this product on the terms set
forth below for ninety (90) days from the date of original purchase.
What This Warranty Does Not Cover
This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation;
(d) improper voltage supply or power surges; (e) signal issues; (f) damage from shipping; (g) acts of
God; (h) customer misuse, modifications or adjustments; (i) installation, set-up, or repairs attempted
by anyone other than by a VIZIO authorized service center; (j) products with unreadable or removed
serial numbers; (k) products requiring routine maintenance; or (l) products sold “AS IS”, “CLEARANCE”,
“FACTORY RECERTIFIED”, or by a non-authorized reseller.
What This Warranty Covers
VIZIO warrants the product against defects in materials and workmanship when the product is used
normally in accordance with VIZIO’s user guides and manuals.
Except where restricted by law, this warranty applies only to the original purchaser of a new product.
The purchase must have been made from an authorized retailer in the United States (including
Puerto Rico) or Canada. The product must also be located in the country where it was purchased at
the time of warranty service.
What to Do If You Are Not Satisfied With Service
If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue
informally with VIZIO. If you are unable to resolve the issue informally and wish to file a formal claim
against VIZIO, and if you are a resident of the United States, you must submit your claim to binding
arbitration according to the procedures described below, unless an exception applies. Submitting a
claim to binding arbitration means that you do not have the right to have your claim heard by a judge
or jury. Instead your claim will be heard by a neutral arbitrator.
Zero Bright Pixel Defect Guarantee (TVs Only)
Your product may qualify for a warranty against “zero bright pixel” defects for the duration of the
warranty on select new product purchases. To determine if this guarantee applies to your product,
refer to the model’s product information page at www.vizio.com, look for the “zero bright pixel”
guarantee on the box, or contact VIZIO Technical Support at the email address or telephone number
below.
Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)
UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE OPTED OUT AS
DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING IN ANY WAY TO YOUR VIZIO PRODUCT,
INCLUDING ANY CONTROVERSY OR CLAIM ARISING OUT OF OR RELATING TO THIS WARRANTY,
A BREACH OF THIS WARRANTY, OR THE VIZIO PRODUCT’S SALE, CONDITION OR PERFORMANCE,
WILL BE SETTLED BY BINDING ARBITRATION ADMINISTERED BY THE AMERICAN ARBITRATION
ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN
ARBITRATION ASSOCIATION, IN ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS
SUPPLEMENTARY PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn more about
the American Arbitration Association and its rules for arbitration by visiting www.adr.org or by calling
800-778-7879. Since this warranty concerns a transaction in interstate or international commerce,
the Federal Arbitration Act will apply.
The filing fees to begin and carry out arbitration will be shared between you and VIZIO, but in no event
will your fees ever exceed the amount allowable by the American Arbitration Association, at which
point VIZIO will cover all additional administrative fees and expenses. VIZIO waives its right to recover
attorneys’ fees in connection with any arbitration under this warranty. If you are the prevailing party
in an arbitration to which the Supplementary Procedures for Consumer-Related Disputes applies,
then you are entitled to recover attorneys’ fees as the arbitrator may determine.
The dispute will be governed by the laws of the state or territory in which you resided at the time
of your purchase (if in the United States). The place of arbitration will be Irvine, California, or your
county of residence (if in the United States). The arbitrator will have no authority to award punitive
or other damages not measured by the prevailing party’s actual damages, except as may be required
by statute. The arbitrator will not award consequential damages, and any award will be limited to
monetary damages and will include no equitable relief, injunction, or direction to any party other
How to Get Service
Before obtaining warranty service, you may visit www.vizio.com for additional help and troubleshooting.
To obtain warranty service, contact VIZIO Technical Support via email at [email protected] or
via phone at 877 MY VIZIO (877-698-4946). The VIZIO Technical Support hours are 6:00AM to 9:00PM
Monday through Friday and 7:00AM to 4:00PM Saturday and Sunday, Pacific Time.
Your Obligations Before Service
You must obtain pre-authorization before sending your product to a VIZIO service center. You may
be required to supply a purchase receipt (or copy) to show that the product is within the warranty
period.
When you return a product to a VIZIO service center, you must ship the product in its original
packaging or in packaging that affords an equal degree of protection. VIZIO Technical Support will
provide instructions for packing and shipping the product to the VIZIO service center.
ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE DELETED IN
THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product
will be restored to its original state. You will be responsible for restoring all applicable user data and
downloaded applications. Recovery and reinstallation of user data and downloaded applications is
not covered under this warranty. In order to protect your personal information, VIZIO recommends
that you always clear all personal information from the product before it is serviced, regardless of
the servicer.
VIZIO’s Responsibilities
If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or
74
C
than the direction to pay a monetary amount. Judgment on the award rendered by the arbitrator
will be binding and final, except for any right of appeal provided by the Federal Arbitration Act, and
may be entered in any court having jurisdiction. Except as may be required by law, neither you nor
VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under this
warranty without the prior written consent of you and VIZIO.
ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE CONDUCTED
SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT NO PARTY WILL HAVE THE RIGHT
OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY
GENERAL ACTION, OR IN ANY OTHER PROCEEDING IN WHICH EITHER PARTY ACTS OR PROPOSES TO
ACT IN A REPRESENTATIVE CAPACITY.
NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED WITH ANOTHER
ARBITRATION OR PROCEEDING WITHOUT THE PRIOR WRITTEN CONSENT OF ALL PARTIES TO ANY
SUCH ARBITRATION OR PROCEEDING.
Exceptions to Binding Arbitration Agreement and Class Action Waiver
IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND CLASS
ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty (60) days of the date that you
purchased the product; (2) your written notification must be mailed to VIZIO at 39 Tesla, Irvine, CA
92618, Attn: Legal Department; and (3) your written notification must include (a) your name, (b) your
address, (c) the date you purchased the product, and (d) a clear statement that you wish to opt out of
the binding arbitration agreement and class action waiver.
In addition, you may pursue a claim in small claims court in your county of residence (if in the United
States) or in Orange County, California. In such case the provisions of the section titled “Binding
Arbitration Agreement; Class Action Waiver (U.S. Residents)” will not apply.
entire section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” will
not apply. This warranty applies to the maximum extent not prohibited by law.
Changes to Warranty
This warranty may change without notice, but any change will not affect your original warranty.
Check www.vizio.com for the most current version.
FOR MEXICO ONLY
BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY.
BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT
AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY
(30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER
WHERE YOU PURCHASED IT.
Warrantor
The warrantor under this warranty is VIZIO Sales & Marketing Mexico S. de R.L. de C.V.
How Long This Warranty Lasts
For non-commercial use, VIZIO warrants the product on the terms set forth below for one (1) year
from the date of original purchase. For commercial use, VIZIO warrants this product on the terms set
forth below for ninety (90) days from the date of original purchase.
What This Warranty Covers
VIZIO warrants the product against defects in materials and workmanship when the product is used
normally in accordance with VIZIO’s user guides and manuals.
Except where restricted by law, this warranty applies only to the original purchaser of a new product.
The purchase must have been made from an authorized retailer in Mexico. The product must also
be located in Mexico at the time of warranty service.
Zero Bright Pixel Defect Guarantee (Displays Only)
Your product may qualify for a warranty against “zero bright pixel” defects for the duration of the
warranty on select new product purchases. To determine if this guarantee applies to your product,
refer to the model’s product information page at www.vizio.mx, look for the “zero bright pixel”
guarantee on the box, or contact VIZIO Technical Support at the email address or telephone number
below.
Exclusions and Limitations
TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS WARRANTIES
OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE LIMITED IN
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU.
VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA,
COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES AND
PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY
CAUSE WHATSOEVER (INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS,
NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY, AT ITS SOLE
AND EXCLUSIVE OPTION AND IN ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND
ITS PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
How to Get Service
Before obtaining warranty service, you may visit www.vizio.mx for additional help and troubleshooting.
To obtain warranty service, contact VIZIO Technical Support via email at [email protected]
com or via phone at 01-800-801-0096 or 001-855-472-7444. The VIZIO Technical Support hours are
9:00AM to 6:00PM Monday through Friday, Central Standard Time.
Your Obligations Before Service
You must obtain pre-authorization before sending your product to a VIZIO service center. You may
be required to supply a purchase receipt (or copy) to show that the product is within the warranty
period.
When you return a product to a VIZIO service center, you must ship the product in its original
packaging or in packaging that affords an equal degree of protection. VIZIO Technical Support will
provide instructions for packing and shipping the product to the VIZIO service center.
How the Law Applies
This warranty gives you specific legal rights, and you may also have other rights, which vary from
state to state and province to province. This warranty applies to the greatest extent permitted by
applicable law.
ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE DELETED IN
THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product
will be restored to its original state. You will be responsible for restoring all applicable user data and
downloaded applications. Recovery and reinstallation of user data and downloaded applications is
not covered under this warranty. In order to protect your personal information, VIZIO recommends
General
No employee or agent of VIZIO may modify this warranty. If any term of this warranty, other than the
class action waiver, is found to be unenforceable, that term will be severed from this warranty and
all other terms will remain in effect. If the class action waiver is found to be unenforceable, then the
75
C
How the Law Applies
This warranty gives you specific legal rights, and you may also have other rights, which vary from
state to state and province to province. This warranty applies to the greatest extent permitted by
applicable law.
that you always clear all personal information from the product before it is serviced, regardless of
the servicer.
VIZIO’s Responsibilities
If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or
replace it, or refund the purchase price to you. There will be no charge for parts or labor during the
warranty period. Replacement parts may be new or recertified at VIZIO’s option and sole discretion.
Replacement parts and VIZIO’s labor are warranted for the remaining portion of the original warranty
or for ninety (90) days from warranty service, whichever is longer.
General
No employee or agent of VIZIO may modify this warranty. If any term of this warranty is found to be
unenforceable, that term will be severed from this warranty and all other terms will remain in effect.
This warranty applies to the maximum extent not prohibited by law.
Types of Service
Displays that are 32 inches or larger will usually be serviced in-home. In-home service requires
complete and easy access to the product and does not include de-installation or re-installation of
the product. In-home service is subject to availability. VIZIO will provide other service options when
in-home service is not available.
All other VIZIO products must be sent to a VIZIO service center to obtain warranty service. VIZIO is
not responsible for transportation costs to the service center, but VIZIO will cover return shipping to
the customer.
Changes to Warranty
This warranty may change without notice, but any change will not affect your original warranty.
Check www.vizio.mx for the most current version.
What This Warranty Does Not Cover
This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation;
(d) improper voltage supply or power surges; (e) signal issues; (f) damage from shipping; (g) acts of
God; (h) customer misuse, modifications or adjustments; (i) installation, set-up, or repairs attempted
by anyone other than by a VIZIO authorized service center; (j) products with unreadable or removed
serial numbers; (k) products requiring routine maintenance; or (l) products sold “AS IS”, “CLEARANCE”,
“FACTORY RECERTIFIED”, or by a non-authorized reseller.
Importer of Record
VIZIO Sales & Marketing México S de RL de CV
Presidente Masaryk 111 Piso 1
Col. Polanco V Sección
Delegación Miguel Hidalgo
México Distrito Federal
C.P. 11560
What to Do If You Are Not Satisfied With Service
If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue
informally with VIZIO. If you are unable to resolve the issue informally and wish to file a formal claim
against VIZIO, you may do so.
Date of purchase:
Model:
Brand:
INFORMATION EXCLUSIVELY FOR MEXICO
To make a warranty claim, or to obtain parts, components, supplies and accessories, you may
contact the importer of record, the warranty service provider, or the establishment from whom you
purchased the VIZIO product.
To make a warranty claim, present your product and either this warranty, duly stamped by the
establishment from whom you purchased the VIZIO product, or a valid invoice or receipt showing
the date of purchase.
Exclusions and Limitations
TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS WARRANTIES
OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE LIMITED IN
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU.
VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA,
COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES AND
PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY
CAUSE WHATSOEVER (INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS,
NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY, AT ITS SOLE
AND EXCLUSIVE OPTION AND IN ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND
ITS PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
Under the terms of this warranty, VIZIO or its representative must exchange parts and components
of the product and include labor and shipping expenses of the product on which this warranty is
valid, within the service network, at no cost to the consumer.
VIZIO is not obligated to honor the warranty in the following cases.
(a) When the product has been used under other than normal conditions.
(b) When the product has not been operated according to the accompanying instructions for use.
(c) When the product has been altered or repaired by persons not authorized by VIZIO or the
respective seller.
76
D
Legal & Compliance
Software Licenses
All software is provided subject to a software license agreement(s) and you
agree that you will be bound by such license agreement(s) in addition to
these terms.
Export Regulations
Customer acknowledges that the VIZIO products, which include technology
and software, are subject to customs and export control laws in the United
States (“US”). The products may also be subject to the customs and export
control laws and regulations of the country in which the products are
manufactured and/or received.
Internet Connectivity
Network conditions, environmental and other factors may negatively affect
connectivity and the resulting video quality, if any.
The applications and content of the applications pictured herein or described
in accompanying documentation may only be available in certain countries or
languages, may require additional fees or subscription charges, and may be
subject to future updates, modifications or discontinuation without notice.
VIZIO has no control over third party applications or content and assumes
no responsibility for the availability or interruption of such applications or
content. Additional third party terms, conditions and restrictions apply.
For DTS patents, see http://patents.dts.com. Manufactured under license
from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together
are registered trademarks, and DTS Studio Sound is a trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
Dolby and the double-D
Dolby Laboratories.
symbol
are
registered
trademarks
of
Other names of companies, products, and services used in this Quick Start
Guide may be trademarks, trade names or service marks of others and VIZIO,
Inc. dis- claims any interest in trademarks, trade names or service marks other
than its own. Mention of non-VIZIO products is for informational purposes
only.
FCC Class B Radio Interference Statement
Information in this Quick Start Guide is subject to change without notice. To
review the most updated version of this Quick Start Guide and the associated
User Manual, go to http://www.vizio.com.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
© 2015 VIZIO, Inc. All Right Reserved.
•Reorient or relocate the receiving antenna.
This Quick Start Guide may not be copied in whole or in part without the
written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable efforts
to ensure the accuracy of the information provided herein. All product
specifications, functionality, features, configurations, performance, design
and other product information described herein are subject to change
without notice. VIZIO, Inc. is not responsible for typographical, technical, or
descriptive errors.
VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks
or registered trademarks of VIZIO, Inc.
HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC.
77
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
D
Notice
Declaración de México:
The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
La operación de este equipo está sujeta a las siguientes dos condiciones: (1)
es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo
la que pueda causar su operación no deseada.
Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modification to this equipment. It is the responsibilities of
the user to correct such interference.
FCC Warning
Changes or modifications not expressly approved by the party responsible
for compliance with the FCC Rules could void the user’s authority to operate
this equipment.
Caution
Always use an AC/DC power adapter that is properly grounded. Use the AC
cords listed below for each area.
Canada Notice for License-Exempt Radio Apparatus
This device complies with Industry Canada’s license-exempt RSSs. Operation
is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device operates on a no-protection no-interference basis. Should the
user seek to obtain protection from other radio services operating in the
same TV bands, a radio licence is required. Please consult Industry Canada’s
document CPC-2-1-28, Optional Licensing for Low-Power Radio Apparatus in
the TV Bands, for details.
Cet appareil est conforme aux CNR exempts de licence d’Industrie Canada.
. Son fonctionnement est sujet aux deux conditions suivantes:
1.
le dispositif ne doit pas produire de brouillage préjudiciable, et
2.
ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable
Industry Canada Class B emission compliance statement
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.
78
No recibe señales de television digital.
© 2016 VIZIO INC. ALL RIGHTS RESERVED.
151202OC-US-A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement