R0E535M00CFK40 User`s Manual (Converter Board for Connecting

R0E535M00CFK40 User`s Manual (Converter Board for Connecting
User’s Manual
REJ10J1923-0200
Rev.2.00
Apr 16, 2010
R0E535M00CFK40
Converter Board for Connecting M16C/5L and M16C/5M Group 64-pin 0.5mm pitch LQFP
1. Outline
The R0E535M00CFK40 is a converter board for connecting
the flexible cable R0E001000FLX10 to a foot pattern for
64-pin 0.5mm pitch LQFP (PLQP0064KB-A).
2. Package Components (See Figure 1)
Check to see if the R0E535M00CFK40 package has all the
following contents before using this product.
R0E535M00CFK40
converter board
YQPACK064SD
YQ-GUIDE (×4)
NQPACK064SD-ND
(1) R0E535M00CFK40 converter board........................... 1 pc.
(2) YQPACK064SD (made by Tokyo Eletech Corporation) ................ 1 pc.
(3) NQPACK064SD-ND (made by Tokyo Eletech Corporation) ....... 1 pc.
(4) YQ-GUIDE (made by Tokyo Eletech Corporation) .....................4 pcs.
Figure 1 Package components of the R0E535M00CFK40
(5) R0E535M00CFK40 User's Manual (this manual)
(1) For debugging
3. Specifications
Flexible cable
R0E001000FLX10
Table 1 Specifications
Applicable package
PLQP0064KB-A:
formerly 64P6Q-A
(64-pin 0.5mm pitch LQFP)
Insertion/removal
iterations of connector
50 times guaranteed
(2) For on-board
evaluation
R0E535M00CFK40
4. Usage (See Figure 2)
The R0E535M00CFK40 can be used for debugging and
on-board evaluation in common by mounting the
NQPACK064SD-ND on the user system.
HQPACK064SD
YQ-GUIDE (×4)
(not included)
YQPACK064SD
(1) For debugging
Mount the NQPACK064SD-ND on the foot pattern of the
user system and attach the YQPACK064SD on it. In
addition, connect the R0E535M00CFK40 to the
YQPACK064SD, and then connect the flexible cable
R0E001000FLX10 of the emulator to the upper connector
of the R0E535M00CFK40.
FLASH MCU, etc.
NQPACK064SD-ND
64-pin 0.5mm pitch
foot pattern
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK064SD (not included) in order
on the NQPACK064SD-ND on the user system.
Before using the R0E535M00CFK40, be sure to read the
precautions on page 3.
●: No.1 pin
Be sure to align the pins.
Figure 2 Usage of the R0E535M00CFK40
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET, CSPLUG/W and
LSPACK are trademarks of Tokyo Eletech Corporation.
REJ10J1923-0200 Rev.2.00
Apr 16, 2010
Page 1 of 4
R0E535M00CFK40
User’s Manual
5. Connection Procedure (See Figure 3)
The procedure for connecting the R0E535M00CFK40 is shown
below.
(1) Mount the NQPACK064SD-ND on the user system.
(2) Attach the YQPACK064SD on the NQPACK064SD-ND.
(3) Secure the four corners of the YQPACK064SD with the
YQ-GUIDEs.
● Do NOT use the screws included with the
YQPACK064SD for fixing the YQPACK064SD.
● Do NOT use the screwdriver included with the
NQPACK064SD-ND for fixing the YQ-GUIDEs. That
is used only for the HQPACK064SD.
(4) Mount the R0E535M00CFK40 on the YQPACK064SD.
(5) Attach the flexible cable R0E001000FLX10 of the
emulator to the R0E535M00CFK40.
Figure 3 Connection procedure of the R0E535M00CFK40
6. External Dimensions and a Sample Foot Pattern
CN2
51
50
16.50
TP4
CN1
50
0.25
0.50
100
51
TP2
Pb Free
MADE IN JAPAN
14.00
1
10.00
1
38.00
100
9.50
R0E535M00CFK40
REV.A
TP1
TP3
9.50
35.00
10.45
5.55
10.00
14.00
Unit: mm
Figure 4 External dimensions and a sample foot pattern of the R0E535M00CFK40
REJ10J1923-0200 Rev.2.00
Apr 16, 2010
Page 2 of 4
R0E535M00CFK40
User’s Manual
7. Precautions and WEEE Directive
CAUTION
Cautions to Be Taken for This Product:
z When connecting the YQPACK064SD, be sure to use the included YQ-GUIDEs.
z Do not use the screws included with the YQPACK064SD for connecting the YQPACK064SD.
IMPORTANT
Notes on This Product:
z We cannot accept any request for repair.
z For purchasing the NQPACK064SD-ND, YQPACK064SD and HQPACK064SD, contact the following:
Tokyo Eletech Corporation
http://www.tetc.co.jp/e_index.htm
Disposal Instruction (This is only valid in the European Union.):
Renesas development tools and products are directly covered by the European Union's Waste Electrical and Electronic
Equipment, (WEEE), Directive 2002/96/EC. As a result, this equipment, including all accessories, must not be disposed
of as household waste but through your locally recognised recycling or disposal schemes. As part of our commitment to
environmental responsibility Renesas also offers to take back the equipment and has implemented a Tools Product
Recycling Program for customers in Europe. This allows you to return equipment to Renesas for disposal through our
approved Producer Compliance Scheme. To register for the program, click here “http://www.renesas.com/weee".
8. Correspondence of Connectors CN1 and CN2
Table 2 Correspondence of the connectors
CN1 Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
IC1
40
41
42
10
43
8
44
45
46
47
62
63
64
1
2
3
4
5
6
7
8
9
10
11
12
-
CN1 Pin No.
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
IC1
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
-
CN2 Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
IC1
-
CN2 Pin No.
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
IC1
48
49
50
51
52
53
54
55
56
57
58
59
60
61
-
(-:No connection or signals in the emulator)
REJ10J1923-0200 Rev.2.00
Apr 16, 2010
Page 3 of 4
Notice
1.
All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or
using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas
Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual
property rights of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are
fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by
such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the
military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products
or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free.
Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas
Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not
use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the
product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless
otherwise expressly specified in a Renesas Electronics data sheets or data books, etc.
"Standard":
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools;
personal electronic equipment; and industrial robots.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment
not specifically designed for life support.
"Specific":
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or
systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating
supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for
malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a
certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety
measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for
hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures.
Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use
Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other
inquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
SALES OFFICES
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics America Inc.
2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A.
Tel: +1-408-588-6000, Fax: +1-408-588-6130
Renesas Electronics Canada Limited
1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada
Tel: +1-905-898-5441, Fax: +1-905-898-3220
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628-585-900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-65030, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China
Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2886-9318, Fax: +852 2886-9022/9044
Renesas Electronics Taiwan Co., Ltd.
7F, No. 363 Fu Shing North Road Taipei, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632
Tel: +65-6213-0200, Fax: +65-6278-8001
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics Korea Co., Ltd.
11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
If the requirements shown in the "CAUTION"
sentences are ignored, the equipment may cause
personal injury or damage to the products.
Renesas Tools Website http://www.renesas.com/tools
All trademarks and registered trademarks are the property
of their respective owners.
© 2010 Renesas Electronics Corporation and Renesas Solutions Corporation. All rights reserved.
Colophon 1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement